Over 1 million tech questions and answers.

Just got a x220 Tablet with Windows 10. My touchscreen isn't working

Q: Just got a x220 Tablet with Windows 10. My touchscreen isn't working

I replied in a another post also, sorry for that.. But I hope this post get's more attention. I just bought a x220 Tablet but my touchscreen doesn't work at all. I bought de computer with Windows 10 installed on it. I just used WacomhardwareCheck and it gave the message: 'your hardware does not appear input capabilities and is not currently supported by the Wacom FEEL driver'.So, does this mean my touchscreen is broken and doesn't work? Is there a hardware problem? How can I see if the touchscreen is registered by Windows?it would be great if someone could help me to get this thing working... I think the touchscreen makes this an interesting machine...

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Just got a x220 Tablet with Windows 10. My touchscreen isn't working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 80

Just got this, and did a clean install of Windows 10 Pro. Installed all drivers, nothing funky in Device Manager, but the touchscreen and the pen are not working. Click on Pen Tablet Properties in Control panel and it tells me Supported Tablet Not Found on the System. This is my first time dealing with one of these, and am lost.  Lenovo Thinkpad X220 TabletIntel i7-2640M(2.8GHz)8GB RAM, 250GB Solid State Drive12.5in 1366x768 Multitouch LCDIntel HD GraphicsIntel 802.11agnBluetooth1Gb EthernetUltraNav, Secure Chip,Fingerprint reader, Camera

Read other answers
RELEVANCY SCORE 79.6

After a fatal error in my windows, I had to reinitialize my windows 10. After I did so by the windows original tools, the windows became completely stable, but all tablet features are lost. Even thinkvantage cannot recognize many features and hardwares do not work. What should I do?

Read other answers
RELEVANCY SCORE 76.4

Anyone else encountered and solved this problem? I upgraded about 2.5 weeks ago and have looked everywhere for a solution. I finally got the wireless radio settings to apear when I press Fn+F5 but no bluetooth option exists. Today when I decided I had wasted enough time and tried to go back to Windows 7, it won't let me even though I still have Windows.old and it is whin the 30 day window. I feel stuck. I like Windows 10 but not having bluetooth makes me wish I would have left well enough alone and stayed with Windows 7. Anyone have a fix for either of these problems?

Read other answers
RELEVANCY SCORE 76.4

So, I boot up my laptop and notice I can't type my password in, so I log in with my fingerprint, I open up notepad and notice that my 4 5 R T F G V B, Left Shift, and Left Ctrl keys all don't work. I also noticed that they're all keys that are staggered vertically (with the exception of the modifiers).I went to a keyboard tester site to get a visual representation of the keys that don't work.Notice the chunk in the middle of unhighlighted keys. I've taken my laptop apart before, so I pulled out the keyboard and inspected the keyboard connector and socket and found no tarnishing, bent pins, etc on them.Is there a way to diagnose if this is a keyboard or a motherboard issue?

Read other answers
RELEVANCY SCORE 75.6

Hi everyone, I have a Lenovo X220 Tablet that has touch screen and pen. They suddenly stopped working today. The LCD screen still works pefectly fine, however. The touch screen is enabled on the touch settings. When I try to calibrate, it does not detect my finger or the pen. I also noticed that when I tried to reinstall the driver and it said "a supported tablet was not found on this system". I have the most recent bios. I am running Windows 7 that came with the laptop. All windows updates completed. Is it possible for the digitizer to be defective, but the LCD screen to work perfectly fine?Could it be just a ribbon failure?Which part would need to be replaced, if this is the case? Any advice would be appreciated. Thank you.

A:X220 tablet touch screen suddenly stopped working

Even though it looks like a single device, it is really 3 separate ones.  There is a basic panel.  There is a static discharge digitizer in the front to sense finger touches.  There is a second Wacom digitizer behind the panel to detect the pen.  Any of them can fail.  The wires in the cable can also crack.  Since both digitizers failed, I would first look in device manager to see if there could be a problem with a USB hub.  (digitizers both connect as USB devices.)  My next guess would be the cable.  Sorry I cannot be more definite.

Read other 6 answers
RELEVANCY SCORE 72.4

Hello, i have an Yoga 11 rt, which has a Problem. The Touchscreen has no Function when the Device is in Tablet Mode.  Touchscreen turns off at 180 Degrees, also Keyboard and Touchpad (which is normal i guess). I also remembered there was an Lenovo App which controls that. Bud i dont have that App anymore.Ive also Reinstalled (repair via Windows update/recovery Menü). But the App does not show up. Any Ideas?

Read other answers
RELEVANCY SCORE 72

I have a Lenovo Yoga 710 14 " Signature Edition 2-in-1 PC- bought it two days ago. W10. I have problems with the touchscreen when using it as a tablet. The touchscreen is working perfectly when it's in PC mode. Once I fold it and putting it flat (down at the table etc.)- the screen is no longer responding. It's like the touchscreen function is shuting off somehow. Anyone knows how to solve this?? Thanks

Read other answers
RELEVANCY SCORE 71.6

Hi,I'm not seeing X220 T listed by Lenovo in laptops-windows 10 compatibilty list...??? Is that right? Mine is a 3 years old system... I can't believe is not going to be possible to use Windows 10... Anyone has tried it?Thanks.

A:Windows 10 support for X220 Tablet

Hello,
 
It may work fine with Windows 10, however, I don't believe its generation of CPU, IGP and chipset are supported by Intel for Windows 10, which means that Lenovo can't support them, either.  For what it is worth, I installed Windows 10 on a ThinkPad X61t and didn't notice any issues, and that has been out of support for a much longer time than your X220t.
 
That said, it could be that Windows 7, 8 or 8.1 drivers for the various bits of silicon inside your X220 tablet may work just fine under Windows 10, in which case you would be up and running.
 
The best suggestion I have is to make a thorough backup of your X220 and then try applying the Windows 10 Upgrade.  If it doesn't work, you will be able to wipe the drive and then reload your backup.
 
Regards,
 
Aryeh Goretsky
 

Read other 9 answers
RELEVANCY SCORE 71.2

My ASUS tablet's sound, touchscreen and battery icon. It's really annoying, I've tried using windows update, IOBit Driver Update (Which worked! I was so happy, but after a reboot, it stopped working) so nothing worked in the end. It seems like my OS (Win 8.1 Pro) thinks that it's a desktop. Does anyone have an idea what to do? If you need anything like my tablet's specs just let me know how to get them and I'll post them here!
 
Thanks in advance for answering.
 
 
 
As i'm writing this everything started working again after installing intel drivers. No clue if it'll stay like this so still keeping this up! It started working after my tablet died and i plugged it in. Sounds doesn't actually seem to work though, changing the volume just freezes the little window.

A:Tablet/Laptop sound, touchscreen & battery icon not working.

Please run the Windows 8.1 Refresh. A Refresh basically will reinstall the operating system, this will not affect your personal files if you use the option to save them in the instructions.  The downside is that this will uninstall all of your third party programs you installed.  Windows 8.1 will place a list of removed apps on your desktop after refreshing your PC, I would suggest that you copy this list for a reference when you go to reinstall these programs.Press the Windows key   and the I key to open Settings.In Settings click/tap on Recovery, click/tap on Refresh your PC without affecting your files, then Get Started.You will see a page titled Refresh you PC, click/tap on Next.  On the next page click/tap on Refresh.The computer may turn off and back on during this process, you don't need to do anything.  The scan will display a percentage of its completion.

Read other 1 answers
RELEVANCY SCORE 70.8

Hello,I just buy second hand a Thinkpad X220 Tablet type 4299 BD7I can't make the fingerprint reader work.the peripheral seems to be setup correctly, at least Windows 7 pro says so. It's identified as TouchChip fingerprint Coprocessor (WBF advanced mode) with driver from AuthenTec.Each time I try to setup figerprint I'm send to a non existent page on authentec web site (I know it was bough by apple)I could dl a driver from a third party site, but with no better result.any ponter?thanksjdanield













Solved!

Go to Solution.

A:fingerprint software, X220 Tablet, windows 7

Well... I finally succeed finding the driver... on the lenovo web site. I used the html page name (the one that don't exists anymore), that is "ufma-64bit" and the word "authentec" and google give me the lenovo page. I can't make a copy/paste as I'm not on the right computer, but it's:http://support.lenovo.com/fr/en/downloads/ds030585 file name is "Authentec TrueSuite Fingerprint Software for 64-bits Windows" - in fact windows 7 and it works on the X220 tablet thanksjdanield

Read other 1 answers
RELEVANCY SCORE 68

My X220 tablet comes with pen and limited touch support with 2 touch points. I have no issues on windows 7 but on windows 8.1 it has changed to be working with only 1 touch point since some time that I don't remember exactly when. So that I can work with one finger only and 2-finger functions such as pinch to zoom are unavailable. My drivers are all uptodate. I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution. I tried uninstalling all HIDs through Device manager and one-by-one, specifically wacom device. when I uninstall it, I lose touch option completely. but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition. Maybe there is a conflict with windows 8.1 like Microsoft Input Configuration Device which might be unlikely.  So is there any other way to have full wipe and clean reinstall of those touch screen drivers? I appreciate it if you put links to the drivers for me, if they are not available on Lenovo Support. Tell me if you had the same touch issue in Windows 8.1  and how you solved it. Thanks 

























Device manager.JPG ?72 KB

Read other answers
RELEVANCY SCORE 65.2

Hey all,
I've been working on getting Touchscreen functionality working with Dell's Latitude 7350 2in1 Model with Windows 7 Enterprise SP1 installed. The model ships with Windows 8.1 and above by default and Dell does not provide driver / software support for any
other OS than what is shipped with the model. I had been looking into various touch screen controller vendors for "generic" drivers such as Atmel, Synaptics, etc, but have not had any luck with driver / firmware installs so far. The main issue I
run into is finding firmware installs that are "updaters" that fail to run due to the source firmware not already being installed. I'm hoping there might be a generic touch screen firmware / driver for tablets from Microsoft for use with Windows
7, but have not had any luck in my search so far. Any suggestions would be greatly appreciated.

Read other answers
RELEVANCY SCORE 63.2

Hello!  I have an X220 tablet with a stylus that, whenever near the screen, begins writing or selecting. Depending on the program I have open of course. The touch features work fine, and to the best of my knowledge all my drivers are up to date. At this point I think I need to simply replace the pen, but before I spend the money on that, i would like to see if any of you know how to fix this without a new pen.  Thank you for your time,BriceJ

Read other answers
RELEVANCY SCORE 63.2

I have a x220 tablet with SSD.Need a little more space, so was thinking of adding a mSATA SSD. Will want to continue to use my "regular" SSD as my boot and just use mSATA for storage (run VMs off it so need speed). I don't think there are any issues but figure was worth asking.  Moved to correct forum. 

A:X220 Tablet - SSD and mSata SSD

no real issues. But the mSATA is only SATAII, whilst the main hdd bay operates at SATAIII.

Read other 4 answers
RELEVANCY SCORE 62.8

I have upgraded my X201 Tablet to Windows 10 32bit. As far as I can tell, everything is working, including the WACOM drivers and touchscreen.  Wireless has worked perfectly so far, not sure about Bluetooth as I don't use it. My only issue is that the buttons on the display do not work. The power button located on the display does work. I tried installing the Tablet Button Driver II and it will go through the install but the buttons do not work.  This is the download link:http://support.lenovo.com/us/en/downloads/ds027627 The document claims Windows 10 compatability and was Last Updated :08 Jun 2015. On inspection, all the files extracted are dated from 2012 and when trying to manually run the software Windows throws up an error that the software is not supported on this PC.   I removed and reinstalled and noted that the driver information page when running the installer does NOT have Windows 10 listed as a supported system. My assumption is that the driver that they have linked on the download page is NOT the most current driver and is infact the driver for Windows 7 from 2012. Does anyone know how to contact Lenovo to get the correct driver posted to the page, or know of an alternate source to try and find it?

A:X201 Tablet Windows 10 Tablet buttons not working

hi, I can't help you with your question, sorry! Gooed to hear everything else is working fine on your system. Can you tell me what to do to get the x201 tablet's touchscreen to work!? I will have a clean windows 10 install. Where do i get the (right) drivers (windows, Wacom?) Thanx!Carlo

Read other 1 answers
RELEVANCY SCORE 62.4

Hello all, I have this massive problem with my cursor randomly moving and clicking all over the screen without being touched. I hadn't had this problem until after I had my cracked screen replaced with a new one. I've tried unplugging the mouse, disabling the touchpad, etc. and nothing. Help would be awesome. Thanks ahead.










Solved!
Go to Solution.

A:x220 tablet clicking problem

Kindly update the BIOS and update the driver from ThinkVantage System Update.
If the issue persist then you need to reinstall the Operating System
 
Best Regards,
Tanuj

Read other 9 answers
RELEVANCY SCORE 62.4

computer specs:  x220 tablet, i5-2520m cpu,2.5ghz x4. arch=64-bit. memory 1.8Gib. Graphics intel(r) sandybridge mobile.operating system:Fedora 20 hisenbug. i know i sure prolly be asking this on a linux forum but. ive never seen and cant get my best friend in the whole world (google) to spider crawl any hits on this issue i have.the laptop works awesome, fast, instagram videos play, youtube .etc does everything i want. touchpad response is perfect. i really have nothing to complain about. Bravo Lenovo. ISSUE: when i minimize a program say (vlc) and it goes to the desktop (my wallpaper of istanbul), There is a Strange Afterburn effect, like i can still see a bit of the vlc program on the wallpaper, or screen, like i can see the pause button, like everything else closes properly, the frame(box), and eventually the thing will fade, hence while i have named this Afterburn effect, not sure if the name  fits idk anything. but ive been playing w/ linux on dell,toshiba,gateway,acer,compaq, for years and have never encounterted this.ANDit shouldnt do it, Scientific linux 6. no glibc+ on this same laptop does not do it, but scientifc linux6 cant run chrome. and google rocks so i goota go with f20.wow im done. thanks in advance for any tips or pointers, links.[edit:]wa knew i had to edit it: (edit) Display manager: GNOME Version 3.10.2)(ye i know ther is f23 but im bad) Mod edit: Subject changed to reflect the problem

Read other answers
RELEVANCY SCORE 62.4

I sometimes dock my ThinkPad X220 Tablet in an UltraBase Series 3 connected to AC power, external display, keyboard, and mouse. In this setup I would prefer to keep the tablet screen closed while the machine is running.But the computer always puts itself to sleep when I close it, even though I have set the power options to 'Do nothing' when I close the lid.I am running Windows 7 Home Premium.Can anyone here help me to fix this please?

Read other answers
RELEVANCY SCORE 62.4

My "new to me" X220T is working well, except for the screen rotation. Initially, I had a notice that the auto screen rotation in secondary landscape was incompatible with the WWAN, which I understand is due to the aerial being too close to the WWAN card in this position. Disabling the WWAN cured this, but it seems a shame that it is the screen rotate disables the screen rather than disabling the WWAN in this mode. Having increased the RAM to 8GB, albeit with some warnings high frequency row hammer bit flips!) from Memtest86 , I now see a non-specific warning in the secondary landscape position. Is this normal, or is there a fault?

Read other answers
RELEVANCY SCORE 62.4

Hi, I just received my X220 Tablet, it has the UltraNav touchpad AND the touchscreen.  The mouse was not working correctly, lots of pauses when highlighting or copy/pasting.  Also, screens wouldn't finish loading on some websites without moving mouse.  Called TechSupport, she signed onto my computer and downloaded new (updated) driver.  Worked perfectly!  Until... I turned on the machine the next day (actually I woke it up but it happened with start as well).  Completely frozen mouse, like the entire thing didn't exist.  Weird: only on my own profile, not my husband's and not the Admin that I later created.  Managed to get into Control Panel > Mouse and found the UltraNav tab with all info grayed out, like there was no driver at all!  Went to drivers, found 2: the original and the new.  Should one have been removed?  Is it OK to have 2?  Reinstalled the newer driver and everything OK til I shut it down again, then back to square 1.  It's like the computer has decided there is no driver at all when I shut it off, even when I only sleep. Called back TS a few times, finally someone told me to delete my whole profile and create it again (after moving it to a hard drive so it would save all my docs and settings...which it did not save EVERYTHING, not my bookmarks, not all my programs, not all my files...fortunately, I also backed up everything to same hard drive the more traditional w... Read more

A:X220 Tablet touchpad issues

Which OS?

Read other 9 answers
RELEVANCY SCORE 61.6

A battery firmware popped up to download. I downloaded it but it could not finish and restarted my computer. Now, it is indicating that I do not have a battery though I clearly do. What can I do to fix this?

A:X220 Thinkpad Tablet not indicating battery

Hello and welcomeIs the battery Lenovo genuine or from the aftermarket and has been replaced yourself?

Read other 1 answers
RELEVANCY SCORE 61.6

Hello, The fan in my lenovo X220 tablet stops working after awhile from turning the device on (after around 10 minutes). This causes the temperature of the processor to always be above 90 degree C (using TPFanControl V 0.61). The fan control software shows that the fan is turning at 4060 RPM, but there is absolutly no air coming out! I recently re-applied the thermal paste, and the problem (fan turning off) "might" have started after re-applying the thermal past - I did it in a local computer service shop. I tried to update the BIOS, but the battery does not work and the installation does not start (it gives me an error) because of that. I have been using my X220 for six years with no problems and I currently run windows 10. Please let me know if you have any idea on how to fix this issue. 

A:Lenovo X220 Tablet Fan Turn Off after few minutes

There are only 2 parts involved - the fan and the motherboard.  If the fan bearing gets hot and seizes, it would spin at start-up to avoid the fan error message.  Fans are cheaper than motherboards, so if it were mine, I would try a new fan.

Read other 1 answers
RELEVANCY SCORE 61.6

Hello, The fan in my lenovo X220 tablet stops working after awhile from turning the device on (after around 10 minutes). This causes the temperature of the processor to always be above 90 degree C (using TPFanControl V 0.61). The fan control software shows that the fan is turning at 4060 RPM, but there is absolutly no air coming out! I recently re-applied the thermal paste, and the problem (fan turning off) "might" have started after re-applying the thermal past - I did it in a local computer service shop. I tried to update the BIOS, but the battery does not work and the installation does not start (it gives me an error) because of that. I have been using my X220 for six years with no problems and I currently run windows 10. Please let me know if you have any idea on how to fix this issue. 

Read other answers
RELEVANCY SCORE 61.6

A battery firmware popped up to download. I downloaded it but it could not finish and restarted my computer. Now, it is indicating that I do not have a battery though I clearly do. What can I do to fix this?

Read other answers
RELEVANCY SCORE 61.6

Hi, Yesterday I bought a used X220 Tablet - the version with Gorilla Glass - and installed Windows 10 Pro (64 bit) on it.What a great little computer this is! But what disappointed me was the lack of precision of the pen that came with the tablet. Unfortunately I could not find a setting - or program - to calibrate the pen. On this forum I learned that a lot of owners have to deal with a pen that is not accurate. On one of the posts I read it was mentioned that the digitizer in the X220 Tablet is made by Wacom, so I went their website for a recent drivers. Luckily, I soon found an appropriate tool, the Wacom Hardware Check, on ftp://ftp.wacom-europe.com/pub/WINDOWS/WacomHardwareCheck.exe . After downloading and running it, I was told:"You have hardware that is compatible with the Wacom FEEL driver. You can download the latest driver here: http://www.wacom.com/feeldriver " The URL led to a file on http://cdn.wacom.com/u/drivers/TabletPC/ISD_DualTouch_732-12.exeThe file is about 24 Mb in size. After downloading and installing it, I was able to calibrate the screen, with 25(!) calibration points. Accuracy is great now; not only in landscape, but also in portrait mode! Since I found no reference on this forum to the Wacom FEEL driver in combination with the X220 Tablet running on Windows 10, I thought it might be interesting to others in this forum. Cheers! 

Read other answers
RELEVANCY SCORE 61.6

A battery firmware popped up to download. I downloaded it but it could not finish and restarted my computer. Now, it is indicating that I do not have a battery though I clearly do. What can I do to fix this?

Read other answers
RELEVANCY SCORE 61.6

Hello All! Hoping someone can help with a strange issue. Very recently my x220 started intermittently "losing" the battery. Here are the characteristics of the issue: - Sometimes the machine will boot, and I will see the battery status detected, charge percentage, etc. After a few minutes, however, the x220t status will simply change to "battery not detected." When this happens, I can unplug the laptop from AC power and it will run perfectly off the battery, albeit with no indication of charge level.- Other times I'll get the "no battery detected" issue right away upon booting. Again, the laptop will still run on battery power when unplugged.- Most of the time when I try to boot on battery power, I'll get a "critical low battery" warning and the machine will not boot at all. However, if I plug in AC power, it will boot, and if the battery has a charge, it will again run on battery power (while still saying "battery not detected").- On occasion, allowing the battery to drain completely and then rebooting on AC power will cause the computer to detect the battery again, although most of the time it will "lose" the battery again. I am currently running the most recent version of Kubuntu as the only OS, however I recently had Win10 on there as well, and windows did not detect the battery at all, despite attempts to uninstall and reinstall drivers, update firmware, etc.  It is an original Lenovo battery, although I recently did purchase an aftermarket batte... Read more

Read other answers
RELEVANCY SCORE 61.2

On my X220T, I cannot connect to lan with an error under "Network adapters" that reads:Intel(R) 82579LM Gigabit Network Connection PCI\VEN_8086&DEV_1502&SUBSYS_21CE17AA&REV_04\3&21436425&0&C8 This device cannot start.I've tried to install this driver for the Intel 82579LM only to have it tell me "No Intel Network Connections found on this computer. No drivers installed"Going to device manager and uninstalling drivers does nothing, restarting causes windows to revert to built in drivers that and say that it still can't start. Updating says that the drivers are up to date.When a LAN line is plugged in, the lights do blink, so there is life, but no connection detected at all by windows. So, I'm at a loss, any suggestions?

A:Intel wired LAN (code 10) Cannot Start X220 Tablet

Has anyone had this issue before? I can't seem to find anything about it.

Read other 2 answers
RELEVANCY SCORE 61.2
A:My x220 tablet arrives this Tuesday! What apps to install and what else to do?

0_o Huh? Like in general as a Windows user, Thinkpad user, or as a Windows tablet user?My favorite general advice for the laptop is this: use the Lenovo Power Manager to set the processor as low as possible and activate all other power-saving features except lowering screen brightness.Then, go and get some kind of browser add-on that disables Flash. Firefox does it using the "Toolbar Buttons" add-on, and it even allows you to activate a single Flash element at a time--meaning you can watch the YouTube video without having to see the Flash ad beside it.Those steps transformed my battery life experience. As a Windows tablet? I don't know.... On my Acer W500 (a disappointing machine), the only thing that doesn't really work is Chrome--it insists on me using the scrollbar to scroll, whereas IE and Firefox accept one-finger scrolling just fine, same as any tablet or smart phone. In my case, I really enlarged the DPI settings a lot--150%--to make the right-click menus easier to poke at. Being a bigger screen, the X220 won't suffer from that problem as much, but if you're using the multitouch version, it might be worth experimenting with different DPI settings in the control panel.

Read other 3 answers
RELEVANCY SCORE 61.2

Can i replace just the screen on this assemble that coveres the touchscreen?


























20180110_185155.jpg ?2934 KB

Read other answers
RELEVANCY SCORE 61.2

Hello, Has anyone tried installation of a sierra wireless MC7750 card on a X220 tablet? I've gotten hold of a MC7750 and intend to install it on my X220 tablet and try it with Verizon 4G network. Thanks,Anand

A:Thinkpad X220 Tablet - Installation of sierra wire...

I have not tried it, but I can tell you that most likely it will not work in the default configuration.  Lenovo machines have a whitelist that checks to see if the WWAN card inserted into the machine is regonized and certified.  If the machine doesn't recognize the card it will display an 1804 error.  Since Lenovo doesn't yet sell these cards yet, it's unlikely that this card is on their whitelist. Some people modify their BIOSes to recognize cards that Lenovo hasn't put on their list yet.  I believe you can find such moded BIOSes here: http://www.bios-mods.com/forum/Thread-Removed-whitelist-removal-Lenovo-ThinkPad-x220-v1-21 or alternatively maybe in the forums in http://www.mydigitallife.info/ There may be newer versions of the BIOS in the same forum, but I haven't checked in a while. I've been waiting for months for Lenovo to support the MC7750, or another LTE card like it.  I've been told by several sales people that "it's right around the corner".  Pretty much hogwash so far.  I haven't gone the step of ordering one of these card yet hoping that Lenovo will officially support it soon.  Please post back though if you do end up moding your bios.  I'm curious to know how well it works.  Also read up on taping pin 20.  Some people say it's necessary in addition to moding the bios. Good luck. 

Read other 9 answers
RELEVANCY SCORE 60.4

Hey to everyone. I have a question since lenovo seems to lack on a informations when it comes to this. I bought a used X220 and cant identify if it should be multitouch or pen input only model. Screen part number is (according to lenovo page):04W3462Model Number is 42962WUTouchscreen with finger doesnt work ( if it has any).I dont have a pen (stylus) currently since it was not provided with laptop BUT:Windows in properties says : No pen or touch input is available for this display .Reinstalled windows freshly twice along with drivers (once manually downloaded , second time used Lenovo System update)Still says the same, and there is no tablet or pen and touch settings in control panel.In some other topics , someone suggested to similar problem as a solution installing wacom pen drivers, lenovo digitizer drivers etc.Tried provided drivers , and with every driver throws the same error : a supported tablet was not found on the systemMaybe it has to detect pen near the laptop and it should be fine?Did I just got ripped off?Thanks a bunch!










Solved!
Go to Solution.

A:X220 Tablet Screen type identify ( and touch input...

Ok, so the lcd is definitely multitouch , which is now a reason to concern .Basically , windows recognize it as a laptop, no hid touch input devices in device manager whatsoever.Is this a common issue? Tryed unpluging and plugging back in LCD micro cables but nothing.

Read other 5 answers
RELEVANCY SCORE 59.2

First of all, so far as I know, my upgrade to Windows 10 worked very well and I really like the new OS. The only problem I'm having is that my mic won't work. It shows it as being installed and functioning properly but I can't utilize it anywhere in the system. The driver is the Contexant 20672 SmartAudio HD.  When I go to "Set up a microphone" is says "The wizard could not start. Make sure your hardware is working properly and check your audio configuration in the Audio Devices and Sound Themes control panel." My mic is enabled and the volume is up. Any ideas?











Solved!
Go to Solution.

A:X220 microphone not working after Windows 10

HiWhile there is an issue with Conexant drivers for win10, probably the fastest way is to use Dolby Home Theatre 4 application. It supports Conexant audio chip and works w/o manufacturer drivers.DHT could be found on the Lenovo support site since a lot of laptops has that app preloaded. Also, there are threads on the forum about DHT and presets for certain laptop models and audio chip. Note, I don't know anything whether DHT supports win10.

Read other 8 answers
RELEVANCY SCORE 59.2

I just did a factory reset to windows 7 on a x220 and then did the upgrade to Windows 10. everything seems to be working except the stylus. All the drivers are listed, the touch screen works fine but I get no response when i try to use the pen. I thought maybe the pen had a battery (AAAA) but i can't find anywhere that confirms this and the pen doesn't seem to separate to insert a battery.

Read other answers
RELEVANCY SCORE 58.4

Tablet pc: Nexox s621 (supports 64bit).
Touchscreen manufacturer: et&t (vendor can't give better info).
The tablet came with xp and vista drivers.
Problem: Touchscreen doesn't work on windows 7 (32 nor 64 bit).

Tried this:
a) installing xp and vista touchscreen driver "directly" => driver gets installed succesfully, but doesn't work.
b) installing xp and vista touchscreen driver in different compability modes => driver won't even get installed, get error message.

To some extent windows 7 recognizes the touchscreen by itself (no touchscreen driver installed).
If you touch the screen a cross or small circle appears, and can be moved.
But it appears a totally different place than where you touch the screen.
If the cross by random is placed on an icon, and you mouseclick, nothing happens.
In general all other hardware features are supported, either by windows 7 update, or
using vista drivers. Only the touchscreen and the card reader doesn't work.

A working solution for the touchscreen will be much appreciated and rewarded (small paypal amount).
Thank you.

A:make touchscreen run on tablet, how to

Unless the manufacturer makes a specific driver for Windows 7, you probably aren't going to get it to work.. I know thats probably not what you wanted to hear, but you machine appears to be for XP/Vista.

Read other 3 answers
RELEVANCY SCORE 58

Hi,I have a Thinkpad X220 running Windows 7 Enterprise (got it through my school with it installed). I've now graduated and the activation key has expired so I'm looking to upgrade to Windows 10 home. I created a bootable USB using Microsoft's tool (https://www.microsoft.com/en-us/software-download/windows10). When I F12 BIOS to select a boot device, the USB that is plugged in is titled "Generic USB HDD". When I select it an error is thrown. I took a picture of the error screen below. I then entered BIOS and changed the boot order so that the USB is first. I restarted and it brought up the same error message. I also tried the other USB ports on the computer and it still didn't work. Finally, I also updated the BIOS to the latest version that Lenovo Update offered and it still didn't work.  I also put a picture of my BIOS startup settings.  Please help! Error screen

Read other answers
RELEVANCY SCORE 57.6

Hello everyone !

i've been looking all over for a solution, but i can't seem to find anything..

There used to be a JooJoo forum, with quite a lot of information on how to get everything to work, but they suffered a major database problem, causing them to lose all of their threads..
So yeah, i'm basically on my own to try & figure this out..

I got all the devices properly installed & touch worked out of the box, no optional drivers needed.. however, the touch screen is upside down..
here's what i tried so far:

win8 calibration : the normal way
win8 calibration : upside down (i thought it could've helped since it reads everything upside down)

eGalax touch driver: this made the touchscreen be recognized as a mouse, which works great, but the touch features aren't supported..

changing the screen orientation has no effect, as the touch input rotates with the screen.. i tried this through "display resolution" & the nvidia control panel, but they had no effect at all..
can anyone help me with this problem ?
thanks in advance !

A:Touchscreen on JooJoo Tablet is upside down!

uhm hello ?

i mean, if nobody is going to answer it here, where should i ask my question ?

Read other 43 answers
RELEVANCY SCORE 57.6

I have an Azpen A700 with a functioning LCD that will require more to fix other problems than it's worth. Can anyone offer advice on how I might salvage the LCD. Azpen, of course, wouldn't give me a schematic, so I have no idea if there is a separate controller or if it is on the Motherboard. Any advice would be greatly appreciated. Thanks.
 

Read other answers
RELEVANCY SCORE 57.6

Hey guys. I don't know what happened to my display, but once I reinstalled Windows 10, the display (under Control Panel -> Hardware and Sound -> Pen and Touch -> Display tab -> Display Options -> Display drop-down box) only shows that I have a mobile pc display. But I know that is not correct. And what's worse is that the tablet buttons are not installed in my system. Those two exact problems might be why only the right side of my touch screen is working. I already have the correct driver for my touchscreen laptop so I'm CERTAIN that's not the problem. Can someone (anyone!) help me with solving the first problem and redirect me toward the tablet buttons I need for my Lenovo B50-30 Touch in order to solve the second? I want my full functionality back on my laptop. Thank you very much. Sincerely,organanon

Read other answers
RELEVANCY SCORE 57.2

My wife inherited the title tablet from an uncle who had bought it in May 2013. For a long while she had no use for it as she already had an Amazon Fire tablet. When the latter became unusable I tried to resurrect the Archos. I charged it, but it ran very slowly, also when the power button was pressed to put it in "sleep" it always switched off completely instead.

I refreshed the Android 4.1.1 OS from the Archos site then noticed the touchscreen lost its accuracy and operated the wrong buttons. I subsequently flashed the OS also, but no change. Strange thing is the touchscreen seems OK on some pages, but not on others.

Scanning the web for help it seems that the problem might be in ROM but to try rectify that seems to involve rooting which is new to me and seems a "place of no return" so I am apprehensive.
Can anyone help please?

Re: Sysinfo the problem is the touchscreen errors. It is nearly impossible to key in my site password then I get locked out after too many attempts. I'll keep trying, and will post the system details if I ever get the password entered.
 

Read other answers
RELEVANCY SCORE 57.2

Dear all, my tablet developed insensitive areas at the top and bottom edges of the screen (when held in landscape, so I am talking about the long edges). These areas are about 5 mm wide and strech the whole length of the screen. Also the pointer of the pen seems to avoid these areas. When I received it a few month ago, everythung worked fine.I tried to update the screen drivers and reset the calibration data. Recalibration does not work, because the screen does not detect my touches for the outer calibration points. Any ideas?

Read other answers
RELEVANCY SCORE 56

I bought a used x230T a while ago. Initially the touchscreen worked fine but the motherboard failed after about a month, so I replaced it. After doing so, however, the screen no longer takes touch input of any kind and the webcam no longer works. Any attempts to reinstall drivers have not worked, and I sometimes get an error stating that no touch input hardware could be detected. I've also tried unplugging and replugging the ZIF connectors many times. Does anyone have any advice for other steps I could take or others things I could try? I got the tablet model specifically because of the touchscreen so it's been disappointing to go without it. Thanks for any tips you may have.

Read other answers