Over 1 million tech questions and answers.

BSOD Driver Power State Failure

Q: BSOD Driver Power State Failure

System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD

RELEVANCY SCORE 200
Preferred Solution: BSOD Driver Power State Failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Driver Power State Failure

Quote: Originally Posted by cuz314


System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD


This was Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation

I would re-install using newest.

Read other 4 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

New Computer Setup. Seemingly Random BSODs several times a day.

At first it was just happening when playing games, or running AUTOCAD. But now it just crashed while watching Hulu. I tried reinstalling all drivers I could think of and even did a whole system wipe with no luck.. still BSing.



I've attached my Seven Forums .zip as instructed.

From Mini-Dump:
Loading Dump File [C:\Users\iJoeTime\Desktop\073112-12901-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00210842?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`0175a212?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`03007000 PsLoadedModuleList = 0xfffff800`0324b670
Debug session time: Tue Jul 31 19:55:46.086 2012 (UTC - 7:00)
System Uptime: 0 days 22:31:20.914
Loading Kernel Symbols
...............................................................
................................................................
..................................
Loading User Symbols
Loading unloaded module list
..........
**************... Read more

A:BSOD - Driver Power State Failure

Please fill out your system specs. Click the link in my signature to do it.

Read other 9 answers
RELEVANCY SCORE 98

Hello at all.

Sometimes when i try to shut down my compuer, it hangs for a little bit and than i get a bsod with the driver power state failure 0x9F.

This is not every time but randomly.

I hope anyone can help!!!

? OS -Windows 7
? x64
? What was original installed OS on system? Windows 7 x64
? Full retail
? Age of system (hardware)- 1 year
? Age of OS installation - have you re-installed the OS? one year, never re installed

? CPU - intel i5 [email protected] 3,4GHz
? Video Card - Nvidia GTX 680
? MotherBoard - Asus P8Z77-V LX
? Power Supply - BeQuiet & 750w

A:BSOD driver power state failure

Hi, and welcome to TSF.

Please navigate to c:\windows\minidump, zip up any minidumps you find and attach to your next post.

I'm not sure what the analysts do in cases like this but the BSOD.zip that you attached contains your perfmon report but its in German. Anything you can do about that from your end?

Read other 6 answers
RELEVANCY SCORE 98

I am having the Driver Power State Failure . BSOD and the Driver Power State Failure msg. Hard to restart or shut down. I ran Windows Debugger and the mini dump msg. was.

Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

I am attaching dump file and also sending cloud link sending the link to my cloud with the entire mini dump file.

http://sdrv.ms/VJZV3y

Thank You
Allen Skaggs
 

Read other answers
RELEVANCY SCORE 98

Hello,

I am new to this forum, which I found online while searching for a fix to a BSOD I'm repeatedly having. I am hoping someone could help me out because it is getting extremely frustrating. The PC is used as a dedicated media center. So having the system go down multiple times during a movie is not fun at all.

I first noticed a problem with Win 7 about 10 or so days ago. The OS seemed to be slower than normal when logging on, but no issues other than that. Shortly thereafter when I would switch my TV input to my PC I was continually getting the login screen. I did a little research and it was suggested to change the Windows option to not restart on failure, which I did.

After making that change I noticed a repeated BSOD, with a Driver_Power_State_Failure message. The time varies on how long it will take before I get the crash, but it happens with certainty right now. Windows is also extremely slow logging in, and completely crashes after initial login frequently as well.

The only change that I can pinpoint is that I used a SATA to USB HDD converter to backup a hard drive. Well, attempted to backup. I cannot complete this due to system crashes. Also, I was having repeated system crashes with a portable HDD plugged in, and after unplugging it the system started on the next boot. This could be a coincidence, but I have not troubleshooted that further.

System Specs

? OS - Windows 7 ? x86 64bit ? What was original installed OS on system? - Win 7 Pro ? Is th... Read more

A:BSOD - Driver Power State Failure

I currently have Driver Verifier running, and installed Speccy. Link to output - http://speccy.piriform.com/results/e...uBcUrMpiUSPB2G

Read other 4 answers
RELEVANCY SCORE 98

Over the last two days I've been getting excessive amounts of BSODs, sometimes I'll get 3 or 4 in a row when trying to start up my laptop. I attached a few of the dump files and I'm hoping someone can help me out, it would be very much appreciated.
 

A:BSOD driver power state failure

jhawk90 - please place your minidump files in one Zip file.
 

Read other 1 answers
RELEVANCY SCORE 98

My very recently purchased laptop was showing some problems from last 2 days. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off. It happened only twice. (And if this may help I tell you I had updated atleast one or the other thing before shutting it down...either through HP Support Assistant or Windows update.

Last night i ran Windows Update and tried to turn off my pc but since updates were being installed it said Windows will shut down once the updates are installed automatically...so i went to sleep only to find in the morning a BSOD. It was stuck on it again i had to turn off my pc by holding power button and then windows refused to boot beyond the Windows 7 logo black screen. But after a couple of retries it started.

I am attaching the files.
Please help.

Windows 7 Home Premium x64
OEM
Age of the System- 6 days

A:BSOD Driver Power State Failure

The crash indicates possible Windows corruption or memory problems. The crash bugcheck itself indicates a driver issue.If you are overclocking any hardware, please stop.
Check Windows for corruption. Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.
Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:Shut down and turn off your computer.
Unplug ... Read more

Read other 1 answers
RELEVANCY SCORE 98

I don't even know why this started but it did a few weeks ago. Funny, I've never had a BSOD before even though I've owned 3 or 4 computers. Anyway, this one has occurred several times and it always seems so random. It kinda seems connected to Standby or Hibernate because it usually happens after one of those two things occurs. In fact with hibernate I can usually guess that right after it comes out of hibernate, a few minutes later I will be greeted with the wonderful BSOD.

Here is the minidump. Help would be very appreciated.

A:Driver Power State Failure BSOD

Only ran the last 5 memory dumps (the 6th one was from December, so I left it out).

A couple of KB articles that relate to the errors that you're getting and the sleep/hibernate functions:

KB 975599 Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
KB 977186 Error message when you try to resume a Windows 7-based or a Windows Server 2008 R2-based computer from hibernation: "Stop 0x0000009F"

4 of the dump files blame atapi.sys (a Windows driver), while the 5th blames Apfiltr.sys (a component of your Alps touchpad drivers)

I'm not sure about the exact cause - but I would:
- check to see if the KB articles above apply to your system
- update your Alps touchpad drivers
- update your chipset/storage drivers
- update your graphics drivers

You can get the drivers from here: Select software and drivers HP Pavilion dv4-1225dx Entertainment Notebook PC - HP Customer Care (United States - English)
Please uninstall the old drivers first, then install the freshly downloaded one's.

Please post back if that doesn't stop the BSOD's.

Summary of the BSOD's:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Apr 23 21:30:31.203 2010 (GMT-4)
System Uptime: 0 days 3:05:41.747
BugCheck 9F, {3, fffffa8004c1c680, fffff80000ba2748, fffffa800834fc60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: firefox... Read more

Read other 1 answers
RELEVANCY SCORE 98

My laptop has been having issues with sleep, hibernate, shutdown, etc... On all of these functions it shuts down the graphics, turns off the speakers and wifi, and then just hangs without shutting down. Every now and then it will work properly for a few days and then go back to giving me grief.

The BSOD error is relatively new, maybe for the last two to three weeks. I've only noticed it when the computer is trying to go into sleep mode.

I have attached the results of the Sf Diagnostic Tool.

Thank you in advance for your help.

A:BSOD Driver Power State Failure

Bump

Read other 1 answers
RELEVANCY SCORE 98

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers
RELEVANCY SCORE 98

Wondering if anyone can help....

I bought this laptop back in January, and have had this problem, almost as long as I have had the computer. I have zipped up the reports another thread said to zip up and attach. Any help with fixing this problem is extremely appreciated!

System Info:

Toshiba P505-S8980
Running Windows 7 - Home premium if I am correct.

This is getting aggravating, as I use it as a mobile DJ, it hasn't happened on a gig yet, thankfully, but do not want to take a chance of it happening!

Thank you for any help!

A:BSOD - Power Driver State Failure

Files needed are attched to this message!

Read other 2 answers
RELEVANCY SCORE 98

Hi there, begging someone to help me.
Today when I using my laptop it stucked ,and I reboot it by press the power button,and when it rebooted it stucked at Welcome,and then the blue screen then driver power state failure I tried to reinstalled my os but problem was still here. I found when I uninstalled the Nvidia driver the os can work normally. Really really want someone to help. Thx a lot.

A:BSOD driver power state failure

  
Quote: Originally Posted by Mucbox


......... driver power state failure ..................
I found when I uninstalled the Nvidia driver the os can work normally.


Good info. It occurs.

We need to see the data as per the Blue Screen of Death (BSOD) Posting Instructions.Attach it in your next post in this thread.

Read other 8 answers
RELEVANCY SCORE 98

Came back to a computer that won't shut down, restart or sleep properly. When it does it takes several minutes and at one time gave me the titular BSOD. Everything works fine in Safe Mode (go figure), so I've got a rogue driver in here and I can't for the life of me figure out which one's causing the trouble.

Other symptoms are slow startup (screen starts black for up to a minute after the welcome screen) and Device Manager hangs whenever I try to change (enable/disable, uninstall) drivers. I picked up a hotfix (KB977307) to alleviate the shut down/sleep symptoms but I'd like a little more information before I install it.

Aside from those symptoms there's no major hit to running performance. It looks like I can still use my main comp but I have to rely on hard power downs and jump through safe mode to turn on the computer. The device manager issue is such because I often have to reset my network adapter (Unid network kills my internet sometimes, working to fix that). This will become more of a problem when the next rounds of updates come knocking though.

Basic Spec:
Processor/Mobo/Memory Upgraded Feb 2011
Windows 7 64-bit (x64) Ultimate
Retail (received from MSDN)
Installed Feb 2011

A:BSOD: Driver Power State Failure

Run a system file check - SFC /SCANNOW Command - System File Checker

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Thu May 19 09:21:57.143 2011 (UTC - 4:00)
System Uptime: 0 days 0:14:30.439
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT_LARGE
BiosReleaseDate = 12/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3310
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 98

I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago

A:Driver Power State Failure BSOD

  
Quote: Originally Posted by TomanSager


I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago



HI TomanSager and welcome

These crashes are virtually identical and Related to hidusb.sys Microsoft HID Class Driver.

It is simply taking too long to respond and there is probably a USB device preventing it.

What USB devices do you have connected?


I would run a system file check to verify and repair the OS files.

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JMH\Desktop\Windows_NT6_BSOD_jcgriff2\051511-19047-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Bu... Read more

Read other 4 answers
RELEVANCY SCORE 98

I have been getting this random BSOD from time to time. I'm using a laptop and I'm not sure how and when this started. Occurs when the charger is either plugged or unplugged. Any help will be appreciated. Thanks

A:BSOD Driver power state failure

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 4 answers
RELEVANCY SCORE 98

this is happening every day now, can anyone help?

A:BSOD driver power state failure

Hi,
Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 98

In the last couple of months, my laptop occasionally crashes while it is shutting down - it would be "Shutting Down" for 5-10 minutes - longer than usual. Then, there would be a BSOD, sometimes labelled "Driver Power State Failure". Then, it would reboot by itself.

Attached is the output from the DM Log Collector.

Please help.

A:BSOD Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8008244e10, fffff80000b9a4d8, fffffa8007f54b30}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa8007f54b30
Irp is active with 4 stacks 3 is current (= 0xfffffa8007f54c90)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa8007693050 00000000 fffff80003119210-fffffa8003fc2010 Success Error Cancel pending
\Driver\vwifimp nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8003fc2010

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm vwifibus
start end module name
fffff880`056d6000 fffff880`056e3000 vwifibus (pdb symbols) c:\symcache\v... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello, I seem to be having a bit of a problem with Windows 7. The computer seems to crash whenever Im using it. It's not limited to specific tasks... it crashes whenever it wants. When it does happen, i'll get a 0x9f error.
Not really sure what info to include but here's what I know the computer has:

Model: Sony Vaio AR250G
HDD: 180GB SATA drive (I think)
RAM: 2GB
Processor: Intel Centrino Duo
OS: Windows 7 Ultimate 32 bit

Ive attached some dump files too, I hear that they are useful.

Any help is really appreaciated.
Thanks a bunch.

A:Driver State Power Failure BSoD

It appears as if your webcam drivers are causing the issue. Please uninstall them and install the latest version.

These old drivers need to be updated:
Code:
826c0000 826fd000 ti21sony ti21sony.sys Mon Feb 20 19:32:31 2006 (43FA5F9F)
826fd000 827a7880 slim slim.sys Fri Jun 30 04:13:28 2006 (44A4DD28)
88e09000 88ec9000 iaStor iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
88efe000 88f0e780 SI3132 SI3132.sys Wed Sep 21 12:04:55 2005 (433184A7)
88f7a000 88f85080 PxHelp20 PxHelp20.sys Fri Oct 28 14:29:12 2005 (43626DF8)
88f86000 88f88880 SiWinAcc SiWinAcc.sys Mon Nov 01 15:21:31 2004 (41868CBB)
895e2000 895e3480 SiRemFil SiRemFil.sys Tue Sep 20 18:18:19 2005 (43308AAB)
8a810000 8a8d0000 dump_iaStor dump_iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
8a921000 8a925b20 AegisP AegisP.sys Mon Oct 24 10:38:50 2005 (435CF1FA)
8f421000 8f8615c0 nvlddmkm nvlddmkm.sys Tue Feb 20 20:05:48 2007 (45DB9AEC)
8f971000 8f997e00 e100b325 e100b325.sys Fri Nov 16 13:53:32 2007 (473DE72C)
8f998000 8f9c1000 Apfiltr Apfiltr.sys Tue Dec 05 06:26:00 2006 (45755748)
8fc33000 8fcd6000 stwrt stwrt.sys Tue Feb 06 13:14:55 2007 (45C8C59F)
8fd1e000 8fd4f580 HSFHWAZL HSFHWAZL.sys Tue Oct 18 19:52:32 2005 (43558AC0)
8fd57000 8fd5e580 SonyImgF SonyImgF.sys Mon Mar 06 04:38:59 2006 (440C0333)
8fe19000 8fe30000 5U870CAP 5U870CAP.sys Fri Jun 30 04:27:08 2006 (44A4E05C)
8fe34000 8ff27d00 HSF_DPV HSF_DPV.sys Tue Oct 18 19:53:21 2005 (43558AF1)
8ff2... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hey guys,

I recently started getting the Blue Screen with the title driver_power_state_failure every time I try to shut down or even just make it sleep. The BSoD comes up and the computer keeps running until I press on hold the Power button.
Hope somebody can help me. I have uploaded my DxDiag and the AutoRun-file(2 of them).
I tried getting the the performance-report and the file from the BSOD_Windows7_Vista_v2.64_jcgriff2_ program but when it comes to where it says Waiting for Systeminfo it gets stuck and keeps posting that message
Just say if you need something more.

My system is the following(can be found more exact in the DxDiag):

OS: Windows 7
Motherboard : GIGABYTE GA-990FXA-UD3 (rev. 1.0)
GFX : XFX Radeon HD 6970 (2 GB)
RAM : Corsair 8GB DDR3 2000MHz (2x4) XMS3
Processer-cooler : Scythe Mugen 2 rev.B SCMG-2100
PSU : Corsair Enthusiast Series TX850 V2
HDD : Samsung 1000 GB F3 32 MB
CPU : AMD Phenom II X4 965 Black Edition
CD-rom drive : Lite-On iHAS122 - DVD?RW Black

Thanks for reading, and hopefully helping!

Regards,
Sune Christensen

A:BSoD driver power state failure

Hi -

Sorry, but there is nothing I can do with the 4 files in the zip attachment - simply not enough info to go on.

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - http://www.filehippo.com/download_speccy
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 98

Howdy

So I'm getting the driver state power failure BSOD as well. This computer used to be Vista, about a month ago I put Windows 7 on here. It worked great for like 3 weeks but now its giving me this BSOD every 1-2 days, starting May 7th. It happens randomly - the only constant is that I've had firefox open but I don't know if that really has anything to do with it.

I did look into this before posting here, but it seems like basically everybody's is for different reasons so I'm not sure what to do.

I've attached the latest memory dump file from today.

Any help would be greatly appreciated!

A:BSOD - Driver State Power Failure

dmp points to atapi.sys. Please run a system files check:


Quote:




Open an elevated command prompt and enter sfc /scannow.




Update or remove these old drivers or their respective programs:

Code:
fffff880`0443b000 fffff880`0459f400 RTKVHD64 RTKVHD64.sys Mon Jun 02 06:11:37 2008 (4843C759)
fffff880`02d5d000 fffff880`02d76000 SCDEmu SCDEmu.SYS Fri Oct 31 02:56:21 2008 (490AAC15)
fffff880`04fa2000 fffff880`04ff8000 SynTP SynTP.sys Thu Mar 27 21:15:32 2008 (47EC46B4)
You may also try a repair install.

Please upload any new dmps that might come.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Jonathan\AppData\Local\Temp\Temp1_051510-21528-01.zip\051510-21528-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00ba2730?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a12000 PsLoadedModuleList = 0xfffff800`02c4fe50
Debug session time: Sat May 15 21:55:53.880 2010 (GMT-4)
System Uptime: 2 days 11:35:38.626
Loading Kernel Symbols
.................... Read more

Read other 1 answers
RELEVANCY SCORE 98

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 98

I have attached the files has requested.

I am having varying instances of Driver Power State failures as indicated by the BSOD This only happens when using the internet and I cant figure out which file is causing the shutdown.

Also interesting: I use my computer for home recording with an M-Audio interface, Blue Snowball Microphone, and Alesis M1Active 320USB studio monitors.
While recording or playing back in the Studio SONAR7, the program seems to just randomly start working at half speed and getting all jumpy. I will stop it rewind a bit and start it again and it is fine for a bit and then will start doing it again. Any Ideas on this? could this be linked to the same problem that is giving me the BSOD?

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by Kurt301


I have attached the files has requested.

I am having varying instances of Driver Power State failures as indicated by the BSOD This only happens when using the internet and I cant figure out which file is causing the shutdown.

Also interesting: I use my computer for home recording with an M-Audio interface, Blue Snowball Microphone, and Alesis M1Active 320USB studio monitors.
While recording or playing back in the Studio SONAR7, the program seems to just randomly start working at half speed and getting all jumpy. I will stop it rewind a bit and start it again and it is fine for a bit and then will start doing it again. Any Ideas on this? could this be linked to the same problem that is giving me the BSOD?



Hi Kurt and Welcome

These were all virtually identical and caused by your mausb.sys driver. M-Audio Fast Track Pro PNP Device ID USB\VID_0763&PID_2012\5&BD40FB&0&4 Driver c:\windows\system32\drivers\mausb.sys

I would remove it to test.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JMH\Desktop\Windows_NT6_BSOD_jcgriff2\050911-36909-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`82b5fad4?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbol... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!

Finally found my motherboard info

CPU Core 2 Duo p7350
Motherboard Compal 30F7
chipset GM45/GM47 Rev 7
southbridge 82801m (ich9-m) rev 3
Bios HP F.55 date 10/06/09
Single DDR2 4096b gskill 333mhz
intel 4 seriess chipset

Please ask for anything else I can provide to help...

Thanks for reading and helping!!!

A:BSOD Driver Power State Failure...Please Help

  
Quote: Originally Posted by micahl88


Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!


These were virtually identical and Related to hpdskflt.sys HP Disk Filter from Hewlett-Packard Corporation. I would re-install it (or remove it completely). I am not a big fan of HP's bloatware and remove it at all costs.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\051111-47205-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2... Read more

Read other 7 answers
RELEVANCY SCORE 98

I get a
BCCode: 1000009f
BCP1: 0000000000000004
BCP2: 0000000000000258
BCP3: FFFFFA80036E5680
BCP4: FFFFF80000BA2740
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
when placing my computer into hibernate state. Also my usb ports cut out after a long time on the computer and device manager stops recognizing all input. I have reformatted the drive and reinstalled all up to date drivers.

Can any one help me please?

A:BSod Driver Power state Failure

Hi -

Please run - http://www.techsupportforum.com/f217...ns-452654.html

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 98

Morning, all.

I could use a bit of help--I've been having a number of BSODs lately, and they always relate to a driver power state failure. Doing my own research has not really been as productive as I'd like.

Of note: this really only happens when I open the laptop back up after leaving it alone for some hours (when I wake up, and occasionally when I get back from work). The computer will run fine for about 5-10 minutes, and then I get a BSOD. I'm running Vista, SP2, on a Dell Inspiron 1525--haven't really had any major problems with this before.

I'm attaching a zip of the minidump and the msinfo32 file as I saw requested in another thread. Many thanks for any help!

Best
writingmiles

A:BSOD and Driver Power State Failure

For more specific troubleshooting, please follow the blue screen posting instructions to provide your full reports.http://www.techsupportforum.com/foru...ta-452654.html
Crashes point to your M-Audio KeyStudio device and/or its drivers. It is conflicting with your PreSonus Inspire WDM device and/or its drivers.

-----

Read other 2 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello, having a driver power state failure. Can't figure out the driver thats causing the problem. Any advice on fixing? Thanks

A:bsod driver power state failure

Hello soupbox.

As a test, can you disable the webcam via device manager, and see if it continues to crash, or stops?

Whatever may the result be, let us know.

Read other 4 answers
RELEVANCY SCORE 98

Hello,

About 50% of the time that I shut down my PC, it freezes on the message "Shutting down" and after a while gives me a BSOD. I also get a BSOD every now and then when I'm browsing the web. I've ran the SF diagnostic tool and will post the results here.

I also came across the following similar looking article:

Driver power State Failure

I would be extremely grateful if somebody could shed some light on the situation, I strongly believe that this is one of the main causes of my insomnia, after bankruptcy and alcoholism of course.

A:BSOD: Driver power State Failure

All of your BSODs are being caused by your graphics driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007957a10, fffff80000b9c3d8, fffffa800717ae10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------
Driver Reference Table - nvlddmkm.sys

Looking at the driver we can see it is very very old:


Code:
kd> lmvm nvlddmkm
start end module name
fffff880`0f000000 fffff880`0fc75d80 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sun Jul 10 18:12:46 2011 (4E1A23DE)
CheckSum: 00C7AFE4
ImageSize: 00C75D80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: Drivers - Download... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi,

? OS: Windows Vista SP2
? 64-bit
? No previous installed OS
? Age of system (hardware) - 2 years, 3 months
? Age of OS installation - have you re-installed the OS? 2 years, 3 months, never re-installed
? CPU - Don't know
? Video Card - nVidia - Display - NVIDIA GeForce 7600 GS
? MotherBoard - Don't know
? Power Supply - Don't know

The problem is sometimes when I want to shut my computer down it takes AGES. After waiting about 20 minutes, it will just BSOD and be fine when I re-boot it. Sometimes, but not as often, after I turn on my computer back from sleep mode it will go very slow for about 20 minutes then just randomly BSOD.

Thanks in advance to anyone that can help!

A:BSOD Driver Power State Failure

Hi -

The BSOD dump shows OS corruption. The likely cause is unknown hardware failure.

Run memtest86+ --> http://www.memtest.org/#downiso
- one stick at a time, alternate the slots

Run chkdsk /r

Run HDD diagnostics

Regards. . .

jcgriff2

.



Vista x64 SP2 - - BSOD BUGCHECK 0x9f (0x3,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\Mini041310-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18160.amd64fre.vistasp2_gdr.091208-0542
Machine Name:
Kernel base = 0xfffff800`0204e000 PsLoadedModuleList = 0xfffff800`02212dd0
Debug session time: Tue Apr 13 21:25:44.807 2010 (GMT-4)
System Uptime: 7 days 0:29:19.048
Loading Kernel Symbols
..........................................
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis... Read more

Read other 9 answers
RELEVANCY SCORE 98

BSOD frequent error, it happens a least 3 time a day! Can someone help me please? It drives me crazy, Thank you

OS:Windows 7 Ultimate x86 Full retail
Age: year 2008? I don't know but there is a sticker on the bottom that says that.
OS install: less then 5 months old

A:BSOD Driver Power State Failure

I note you have Avast...
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 98

Hi

i recently bought a second hand alienware and i am constantly getting driver power state failure bsod

is this the code you need for someone clevere than me to tell me whats causing the problem

9f
BCP1: 0000000000000003
BCP2: FFFFFA800D619A10
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA801392F560
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

thanks in advance

A:driver power state failure bsod

btw iv updated drivers and bios from dell and ran the diagnostics checks the last bluescreen analyzer is this




0x0000009F_0x0000000000000003__0xFFFFFA800D595A10__0xFFFFF80000B9C3D8__0xFFFFFA8012C68A90_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5B3A10__0xFFFFF80000B9C3D8__0xFFFFFA801265FB40_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D5060__0xFFFFF80000BA2748__0xFFFFFA80125D4490_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800F9F1E10__0xFFFFF80000B9C3D8__0xFFFFFA8012AB9C60_C__Windows _system32_drivers_hdaudbus_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D618060__0xFFFFF80000B9C3D8__0xFFFFFA8011AFE1B0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D614A10__0xFFFFF80004157748__0xFFFFFA8013485400_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D9A10__0xFFFFF80000B9C3D8__0xFFFFFA8012A47CA0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D617060__0xFFFFF80000BA2748__0xFFFFFA80128E54D0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D597A10__0xFFFFF80000B9C3D8__0xFFFFFA801262B200_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D610A10__0xFFFFF80000B9C3D8__0xFFFFFA800D7FA800_C__Windows _system32_drivers_pci_sys

Read other 9 answers
RELEVANCY SCORE 98

I have an ASUS S56CM laptop with Windows 8.1.

For the past few days I have been getting a BSOD (Driver Power State Failure) upon start up. Leading up to this, my computer would freeze completely at random times not that often and I had to do a hard shut down to fix it.

The past three days have been identical. When turning my computer on from a completlely off state, it takes forever to start then eventually gives me the BSOD. The 0% thing never loads so I do a hard shut down and turn the computer back on. It still takes forever to start (8 minutes +) but I don't get a BSOD and am able to use the computer fine. Then when shutting down, it takes over 6-8 minutes as well. Before all this, my computer would get to the log in screen in under one minute.

I had a program called "WhoCrashed" but it hasn't logged any of the BSOD's from startup, only ones that I had when the computer was already on. For one of them, it told me the error may have been caused by iastora.sys which was the Intel Rapid Storage Technology driver. I tried to delete this as well as installing a newer version but it didn't fix anything.

A:BSOD Driver Power State Failure

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!
Add to that the release of the Win10 preview and my system messing up - and I'm way behind on replying to topics. Sorry!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 8 answers
RELEVANCY SCORE 98

Hello,

I'm brand new to the forums. Usually I'm able to sort my own computer problems (with the help of good ol' Google). However I've been stuck with this for some time now. BSOD, Driver_power_state_failure. I can't really pin point a particular time this happens I'm afraid. I built this PC myself (my first one) about 7-8 months ago(?) and haven't really had any problems.

So far, I've reinstalled windows and updated all my drivers as recommended from many Google searches but I am still getting the same BSOD and frankly if I can't find the answer via Google I'm pretty much buggered . After reading the posting instructions I've used the diagnostic tool, so I'll attach the zip.

Any help or advice would be most welcome and appreciated.

Thanks very much guys.

Steve

A:BSOD - Driver power state failure

Vayzaroth,

Welcome to SevenForums.

Help us to help you by carrying out the following:
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the ?Other Info? block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
===================================================
thanks
karl

Read other 9 answers
RELEVANCY SCORE 98

Hi all,

Since I installed Win 7 64 bit Home on my HP 6735s laptop (originally Vista 32 bit) I keep randomly getting the DRIVER_POWER_STATE_FAILURE, it's just random so I wonder if you can help.

I also never got this in Vista though I have swapped the network card for HP's recommended Wireless N card.

? OS - Windows 7
? x64
? Original OS Vista 32 bit
? Original OS was OEM, new is Full Retail
? Approx 2 years old
? Age of OS installation - When Win 7 came out, Oct last year? Never been reinstalled.

Will attach the requested files :)

Cheers,
Paul.

A:[BSOD] Driver Power State Failure Win 7 x64

...and the perfmon file :)

Read other 9 answers
RELEVANCY SCORE 98

Hello there, I hope someone would be able to point me in the right direction of the cause of a BSOD. I have pasted the memory dump below.

Thanks in advance.
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Eden of Africa\Documents\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`6ce07000 PsLoadedModuleList = 0xfffff800`6d0d3aa0
Debug session time: Wed Oct 8 07:14:18.844 2014 (UTC + 2:00)
System Uptime: 0 days 17:52:34.531
Loading Kernel Symbols
...............................................................
................................................................
...............................................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************************... Read more

A:BSOD - driver power state failure - IRP

Hello, Welcome to EF!

To be able to better help you, please follow the Blue Screen of Death (BSOD) Posting Instructions

-Justin

Read other 1 answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hi, all I just clean installed Windows 7 Ultimate 32bit on my Dell Vostro 1310 with 3gb ram, 1.8gHz Core2Duo, and 250gb hd. However I am getting BSOD stating driver power state failures, the computer will power up and work fine for about 20-mins then it will crash like clock work.
I do not have any exclamation marks in the device manager, I have update all my drivers with the latest and greatest Vista 32bit drivers from Dell as that is all they have right not, and I even updated the bios.
I tried to analyze the dump files myself but every time I attempt to install the debugging software it hangs at the progress bar until it becomes unresponsive then eventually crash the system. I have attached a dump file for review, if someone is willing to help me out.
Thanks

A:BSOD Driver power state failure

The OS becomes exasperated because the combination of the disk hardware and the drivers responsible for controlling it are taking too long to deal with a power state transition.

Try to update this driver...

iaStor Fri Jul 13 08:59:22 2007

... and get rid of this one:

SiWinAcc Tue Nov 02 06:21:31 2004

Ultimately, if the problem is not caused by a driver, the disk hardware itself may be suspect. Hopefully it's a driver!

In the short term, you may be able to work around the issue by disabling all power management - set everything to run at 100% constantly.

-----------------------------------
EDIT: BTW, the "do you have question marks in devmgmt.msc?" line of BSOD troubleshooting is a waste of time. The one thing you can pretty much rule out as the cause of a BSOD is the lack-of-driver for a device which hasn't been detected and enabled.

Read other 5 answers
RELEVANCY SCORE 98

Hi,

i got my notebook (MSI GE60) a month ago and since then i'm experiencing BSOD. It doesn't happen regularly. Sometimes it happens twice a day, sometimes nothing happens for 2 days .

Below i attached the dump files.

If any other info needed let me know.

A:BSOD: driver power state failure

two things, first Uninstall Daemon tools and then run this program:

Duplex secure

when you run the tool if the uninstall box is greyed out then your done If it is not then click it and let it uninstall. DO NOT click the install button It will install a Driver known to cause BSODs.

Second I notice that your video card driver (which is what the crash dumps are blaming as the problem) Is one of the drivers from the Dec 29 batch there are two things you can try, seeing if there is another update, I have heard tell that there is a beta driver that might solve the problem, or you can install an older driver and see if it fixes things. the drivers can be found here.

Read other 9 answers
RELEVANCY SCORE 98

I got a BSOD earlier and the error was "DRIVER_STATE_POWER FAILURE. Requested files attached and I also found this info in my system logs:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8007694060, 0xfffff800045e7748, 0xfffffa8008f9c680).

My system specs are available in my profile.

I hope I did everything correctly, and thanks in advance for the help!

A:Help With Driver State Power Failure BSOD

Hi GirlFriday and welcome to the forum.

Security App

Code:
avgrkx64.sys Fri Feb 8 09:14:05 2013 (51146D7D)
avgldx64.sys Fri Feb 8 09:14:24 2013 (51146D90)
avgloga.sys Fri Feb 8 09:14:29 2013 (51146D95)
avgidsha.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgmfx64.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgtdia.sys Thu Mar 21 07:50:47 2013 (514A6777)
avgidsdrivera.sys Fri Mar 29 07:40:56 2013 (5154F128)
avgtpx64.sys Tue May 7 18:38:19 2013 (5188F5BB)
Crashes indicate AVG being a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Wind... Read more

Read other 9 answers
RELEVANCY SCORE 98

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 98

I can't seem to narrow down the culprit for this (beside me not knowing what I'm doing). Will someone please look at the dump files and provide a bit of advice.

I have gone through and confirmed all of the drivers are the latest version.

The error seems to occur when the machine has been left on - go to a meeting and come back to BSOD upon power up. I cannot duplicate the failure.

Appreciate the help.

A:BSOD Driver Power State Failure

Hi bsodvictim.

Download and install Intel? PROSet/Wireless Software and Drivers for Windows 7 which works for your Intel? Centrino? Advanced-N 6230. It is too old and failing.

Let us know the results.
___________________________________________________________________________________________

Code:
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8006e77050 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\DRIVERS\NETwNs64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwNs64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwNs64.sys
\Driver\NETwNs64
Args: 00014400 00000000 00000004 00000002
[ 16, 2] 0 e1 fffffa800741b040 00000000 fffff8000351c200-fffffa800c835370 Success Error Cancel pending
\Driver\vwifibus nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800c835370

Args: 00000000 00000000 00000000 00000000

Code:
fffff880`0543e000 fffff880`05cc4000 NETwNs64 T (no symbols)
Loaded symbol image file: NETwNs64.sys
Image path: \SystemRoot\system32\DRIVERS\NETwNs64.sys
Image name: NETwNs64.sys
Timestamp: Sun Sep 18 14:5... Read more

Read other 8 answers
RELEVANCY SCORE 98

I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob

A:Driver power state failure BSOD

  
Quote: Originally Posted by rbdig


I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob


Hi Bob

We need the actual DMP file. yours is an unreadable html file.

Let us know if you need help

Ken

Read other 2 answers
RELEVANCY SCORE 98

My computer crashes randomly. Giving me the blue screen error, Driver Power State Failure. Not sure how to resolve this issue.
Assistance required ASAP.
I'm working on a senior project and my computer crashing is eating up valuable time.

A:BSOD Driver Power State Failure

Hello win7ndhlp.

You are facing some extensive network related crashes. And this is behind them all.

Code:
fffff880`031d72f8 fffff880`02ecf96eUnable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0x196e
Description here: Driver Reference Table - SymIMv.sys

I dont believe that the best policy of network security is network blocking.

Uninstall Norton and all Symentec products using Norton Removal tool.
AND OMG

Code:
Start Menu\Programs\AVG 2011
Start Menu\Programs\AVG PC Tuneup 2011
Start Menu\Programs\AVG PC Tuneup 2011\Utilities
Start Menu\Programs\McAfee Security Scan Plus
What have you done! 3 AV programs at a stage, specially two crapware!!! Get rid of them at once. Uninstall AVG using AVG Remover. Uninstall McAfee Using McAfee Removal Tool. NEVER use more than one real time protection program. Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

For your USB network adapters (EVDO) you need to do some general USB related troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Devi... Read more

Read other 9 answers
RELEVANCY SCORE 98

Just started happening within last 2 days.

Gateway P7811FX laptop (approx 2yrs old), full retail Win7 Pro x86 installed early June 2011. Never had a BSOD until last couple days. Both crashes occurred seemingly at random (not at startup).

Ran verifier as instructed here and OS crashed at startup. Able to turn off Driver Verifier in Safe Mode. Restarted normally to collect dump and perfmon files.

TIA

A:BSOD Driver Power State Failure

A device driver is probably the cause
For that reason old drivers should be updated:

Synaptic Touchpad driver Drivers | Synaptics
SD reader driver Fujitsu Gateway Support - Downloads & Support Documents
Conexant modem driver(s) Gateway Support - Downloads & Support Documents
Marvel Yukon Network driver Marvell - Support


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 87bff2d8, Physical Device Object of the stack
Arg3: 82b2cae0, Functional Device Object of the stack
Arg4: 85e51ef8, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: 85e51ef8

DEVICE_OBJECT: 87999510

DRIVER_OBJECT: 85dc24b0

IMAGE_NAME: disk.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bbf20

MODULE_NAME: disk

FAULTING_MODULE: 8b218000 disk

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 82acbf35 to 82ae3f2c

STACK_TEXT:
8... Read more

Read other 5 answers