Over 1 million tech questions and answers.

A lot of Windows Services not responding after Auto-Update...Windows 7

Q: A lot of Windows Services not responding after Auto-Update...Windows 7

Hi Guys,

Windows 7 auto-updated last night, and left me with a big mess today.

A lot of windows services are not responding at all, will not open, some freeze ect...

It all started with windows getting stuck at the blue screen, something along the lines of preparing windows ect, do not shut down. It kept looping on restart.

I got it to finally get to windows but..

Windows Update (does not open at all)
System Restore Opens *but* I apparently do not have any restore points
Safe Mode with Network boots to a black screen (safe mode in all 4 corners though)
Microsoft excel does not open
Cannot uninstall Microsoft starter 2010

I deleted all files under c>windows>softwaredistribution>download

I downloaded the service pack 1 manually from Microsoft website, the .exe file will not run at all.

So there it is, I can browse the internet but most windows services do not run.

Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: A lot of Windows Services not responding after Auto-Update...Windows 7

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 103.6

Hi Guys,
Windows 7 auto-updated last night, and left me with a big mess today.
A lot of windows services are not responding at all, will not open, some freeze ect...
It all started with windows getting stuck at the blue screen, something along the lines of preparing windows ect, do not shut down. It kept looping on restart.
I got it to finally get to windows but..
Windows Update (does not open at all)
System Restore Opens *but* I apparently do not have any restore points
Safe Mode with Network boots to a black screen (safe mode in all 4 corners though)
Microsoft excel does not open
Cannot uninstall Microsoft starter 2010
I deleted all files under c>windows>softwaredistribution>download
I downloaded the service pack 1 manually from Microsoft website, the .exe file will not run at all.
So there it is, I can browse the internet but most windows services do not run.
Any help would be greatly appreciated.

A:A lot of Windows Services not responding after Auto-Update...Windows 7

Download Windows 7 Services Repair to your desktop.
Important that this tool is on Desktop!
Right Click Run as Administrator.
Type 2 into the CMD window, hit enter.
Allow it to complete.
Then type 3 into the Command window, hit enter.
Allow that to complete as well.
Then reboot your machine.

Read other 12 answers
RELEVANCY SCORE 66.8

I have a Windows 7 Home premium x64 OS and it has been giving me more and more problems. I've ran virus scan on AVG and Windows security and came up with NOTHING. I've tried msconfig and disabling all non-windows services from starting and still nothing has helped! Windows Live ID Sign in use to start after i had to manually start it (even though it was set for automatic), and now it won't even start at all, giving me the error it didn't respond in a timely fashion. My windows task manager doesn't respond, and my system restore gives me an error saying "A volume shadow copy service component encountered an unexpected error". The problem seemed to start when my web browser would start to not load pages. Then my printer wouldn't work because the "printer spool" service wouldn't start, then of course the hardware and devices in the control panel wouldn't load. After resolving that by manually starting the bluetooth service, the Task Manager stopped working, and the "printer spool" service failed and would not stay started. My start up speed has seemed to have hit a brick wall as well, I've ran start-up repair to no avail. This is my build as copied from newegg.com:

ASUS P6X58-E PRO LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
EVGA SuperClocked 01G-P3-1461-KR GeForce GTX 560
CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31
Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor
G.SKILL Ripjaws Series 8GB (2 x ... Read more

A:Windows services not responding or starting, please help!

Welcome to the Seven Forums, ACE.

You might find the answer to your Printer Spool problem at Print Spooler Stopping Automatically in Windows 7

Amarnath

Read other 2 answers
RELEVANCY SCORE 66.4

i am not good at english, hope i can make myself clear.hello, everyone. this is all my fault. i download a movie call "Brave" via torrent from internet. after download i can't open the video file, the readme file tell me that i need to install a decoder software in the same folder. i use the microsoft security essential to scan this "decoder", all good. so i install it after scaning.then, bad thing happened. the microsoft security essential realtime protection shut down. windows fire wall shut down. windows update shut down. the most important, all of those three could not be restart and i can't find each of them in the services.msci search on google for a solution. it take a long time. finally, i found something on the google. the solution is use "sc" command to recreate the service on services.msc. then i download a reg file called "wscsvc.reg" from that site, and import it to the system.http://pressf1.pcworld.co.nz/showthread.php?116524-Win7-Security-Centre-service-missing-after-malware-infectionWindows Registry Editor Version 5.00[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\wscsvc]"DisplayName"="@%SystemRoot%\\System32\\wscsvc.dll,-200""ErrorControl"=dword:00000001"ImagePath"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,\ 74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\ 00,76,... Read more

A:missing server Windows security center, windows firewall and windows update in services.msc

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan resultsDownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results hereDownloadESET online scannerInstall itClick on START,it should download the virus definitionsWhen scan gets completed,click on LIST of found threatsExport the list to desktop,copy the contents of the text file in your reply

Read other 23 answers
RELEVANCY SCORE 66

Hi All,

I recently upgraded to Windows 10, and I've run into a few different issues. I've been able to solve most of them thanks to searching around online, but none of the suggestions have helped to get my audio working. I'm running into an error of "Audio Services Not Responding", and the speaker in the toolbar has a red-x. When I open up the playback devices, it says "No audio devices are installed."

I have a Nvidia Geforce GTX 970. I've confirmed that the Windows Audio and Windows Audio Endpoint Builder are both running without problem. I've tried uninstalling/deleting the drivers, and restarting the computer. I've also tried installing the NVIDIA Windows 10 Compatible version of the drivers (364.51). Nothing seems to be working, and I was hoping you all might be able to help! Let me know what additional information is needed, and I've attached some screenshots of what I'm seeing. Any help is greatly appreciated, and thank you!

Read other answers
RELEVANCY SCORE 64.4

Hello,

My computer was unable to upgrade to windows 7. I am using a compaq presario notebook PC. The boot device ( CD ) does not work, the system recovery does not work and there is no "repair my computer" on the F8 option. I tried safe mode and it does the same thing as start windows normally. It will say Setup is starting services and after 10 seconds it will auto restart.

Also, is there a way to load the windows.old files?

A:Unable to upgrade windows 7, starting services auto-restart

You can install Windows 7 from a flash drive if your computer supports it. If not, why not replace the optical drive so you have one that works?

If you do not have a Windows 7 installation DVD, you can download a legal copy with SP1 integrated from here: Official Windows 7 SP1 ISO from Digital River.
Make sure you get the same version you have, Home Premium, Pro or Ultimate and 32 or 64 bit. Note that Basic or Starter is not available.

You can now use the downloaded .iso file to create a bootable flash drive using Universal USB Installer ? Easy as 1 2 3.

Simply start it, select Windows 7 from the drop down menu, point to the downloaded .iso and your flash drive, and your off.

Read other 9 answers
RELEVANCY SCORE 64.4

Hi, in the Event Viewer I have been getting an error, Event ID 64. I have followed it up, but when I click on the Certificate to renew it, I get message that Windows cannot renew it. Apparently the Certificate will expire on 2/7. I tried to delete it and I get message that it is needed for encryption. Below is the exact message. Do I have to do anything????


Log Name: Application
Source: Microsoft-Windows-CertificateServicesClient-AutoEnrollment
Date: 22/06/2012 2:43:56 PM
Event ID: 64
Task Category: None
Level: Warning
Keywords: Classic
User: N/A

Description:
Certificate for local system with Thumbprint 7e 2f ce f9 7e 33 fb 1a 59 16 f5 0f a5 d3 fc a2 ed 18 21 2f is about to expire or already expired.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificateServicesClient-AutoEnrollment" Guid="{F0DB7EF8-B6F3-4005-9937-FEB77B9E1B43}" EventSourceName="AutoEnrollment" />
<EventID Qualifiers="32768">64</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-22T04:43:56.000000000Z" />
<EventRecordID>18541</EventRecordID>
<Correlation />
... Read more

A:Win7, 64 bit, Windows Certificate Services Client-Auto Enrollment

Have a look at the Resolve section on this page:

Event ID 64

A Guy

Read other 9 answers
RELEVANCY SCORE 64

Hello, can someone please help me with my problems about Windows Update

I have tried to run Windows Update on my computer and received the following error message:
I have also tried Farbar Service Scanner and i got this file
Attachment 294790
Any help and suggestions would be greatly appreciated!

A:Help with Windows Update Error: Windows Update Services not running.

i have a similar problem here is my farbar file:
Please Help
Farbar Service Scanner Version: 23-11-2013
Ran by Safe (administrator) on 24-11-2013 at 12:02:44
Running from "C:\Users\Safe\Desktop"
Windows 7 Professional Service Pack 1 (X86)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
mpsdrv Service is not running. Checking service configuration:
The start type of mpsdrv service is OK.
The ImagePath of mpsdrv service is OK.

MpsSvc Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open MpsSvc registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open MpsSvc registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open MpsSvc registry key. The service key does not exist.

bfe Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open bfe registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open bfe registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open bfe registry key. The service key does not exist.
Firewall Disabled Policy:
=========... Read more

Read other 9 answers
RELEVANCY SCORE 64

I am currently recovering from an infection (Google re-direct) and am now unable to update Windows.
I am not sure if this issue is related, but I obviously need to fix it either way...

I noticed that my Windows Security Center icon in the task tray had the !
It told me that my automatic updates were turned off, and I was unable to turn them on from there.
Every time I went into system settings (System, System Properties, Automatic Updates) to verify, I had automatic updates selected for daily downloads.

So I manually selected Windows Update from IE Tools -
when I got to the Microsoft site, it started checking to see if I had the latest updates.
I got this error message:
To install updates from this website, you must be logged on as an administrator or a member of the Administrators group on your computer. If you use Windows XP, you can see if you are an administrator by going to User Accounts in Control Panel.

Note: If your computer is connected to a network, network policy settings might also prevent you using this website. Contact your system administrator for help with updates.

I AM the administrator!! (and in fact the only user aside from the 'Guest' selection)

On my virus post (http://www.bleepingcomputer.com/forums/topic394634.html/page__st__45), I was instructed to use SystemLook for these files:
atl.dll
jscript.dll
msxml3.dll
softpub.dll
wuapi.dll
wuaueng.dll
wucltui.dll
wups.dll
wups2.dll
wuweb.dll

The log is posted there, and I can copy... Read more

A:Unable to Update WIndows/ Windows Update Services affected

Can I ask you if you get any service related errors when trying to start Windows Update?
Can you try and create another user account with admin rights, and see if you are able to get these services started?

Read other 21 answers
RELEVANCY SCORE 62.8

I have a strange problem, my Windows update is unable to connect to the Internet to download updates, Norton was also unable to do so and I had to install Avast.I have also noted Norton detecting many Heuristic viruses which it was unable to remove in my system32 folder and thats why I think this problem is caused due to a malware.Here is my HJT log :
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 15:05:36, on 01-03-2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
D:\Windows\system32\Dwm.exe
D:\Windows\Explorer.EXE
D:\Program Files\Windows Defender\MSASCui.exe
D:\Program Files\Realtek\Audio\HDA\RtHDVCpl.exe
D:\Program Files\Keyboard Manager\Manager Utility\KeyboardManager.exe
D:\Program Files\Motorola\SMSERIAL\sm56hlpr.exe
D:\Windows\system32\taskeng.exe
D:\Program Files\Synaptics\SynTP\SynTPEnh.exe
D:\Windows\System32\rundll32.exe
D:\Program Files\Alwil Software\Avast4\ashDisp.exe
D:\Program Files\Windows Sidebar\sidebar.exe
D:\Users\Shantam\AppData\Local\Google\Update\GoogleUpdate.exe
D:\Windows\ehome\ehtray.exe
D:\Program Files\Windows Media Player\wmpnscfg.exe
D:\Program Files\RALINK\Common\RaUI.exe
D:\Windows\System32\rundll32.exe
D:\Windows\ehome\ehmsas.exe
D:\Program Files\Windows Sidebar\sidebar.exe
D:\Program Files\uTorrent\uTorrent.exe
D:\Windows\System32\mobsync.exe
D:\Program Files\Mozilla Firefox\firefox.exe
D:\Windows\explorer.exe
D:\Users\Shantam\Downloads\HiJackTh... Read more

Read other answers
RELEVANCY SCORE 62.4

I have been having problems with simple functions in Excel, Word, PPT, (Office 2007 Enterprise) causing the applications to go into "Program Not Responding" mode. Some (such as attempting to bold a word or number) come back in a few minutes, others (such as 'save as - pdf') never come back.

Running a repair from the Office installation CD fixes these problems, until the next Update runs. For awhile, I was repairing Office daily. Now I've gone to doing updates manually every few weeks and then repairing Office.

I ran an update this morning and aftewards tried Office just to see if the problem of "Program Not Responding" had returned. It had - so - I ran repair again from the Office CD and it is gone.

Would love to get to the root of this problem and be able to have Auto Updates run and not have to keep running the repair.

Suggestions?


2 Mar 2010 - I'm thinking my problem may really be VPN based. Today, rather than connect to VPN immediately (I'm in a home office connecting to the company network), I tried working with my Office apps, accessing the mapped drives and shared printer from my home system and everything worked fine. I then started VPN and things seem to be continuing to work fine.

I'd seen other comments about this issue having to do with accessing mapped/shared resources, so, I wonder if by starting VPN immediately, it has trouble with the connection to resources on my local network, whereas, if those have already been exercised... Read more

A:Auto Update Causing Office 7 Program Not Responding

Do you do regular Registry Cleanups & Disk Cleanups?

Read other 5 answers
RELEVANCY SCORE 61.6

Ok, let me begin by saying I'm not an expert on the computer by any stretch of the word.
That being said, I've been having a problem with an update that Windows Update has been TRYING to install on my computer for at LEAST a month.
Microsoft XML Core Services 4.0 Service Pack 2 (KB936181)
pops up many times a day and it will SAY that it is installing (or that it has been installed) but then a few minutes later POP! There it shows up again. I've tried turning off my anti-virus (Norton 360) and installing it, and nothing works. I have LITERALLY tried installing this thing over 100 times.
Can anyone help me?

A:Windows Update has an update titled "Core Services...etc" that will not install

Try directly downloading it here

Read other 13 answers
RELEVANCY SCORE 60.8

I have a problem where Windows update will not update, CA Security Center willnot update and Malware programs hang. Malwarebyte hangs, Spyware doctor will not update. Windows malicious software will not download from the MS website. Highjackthis will not launch.

Essentially all antimalware programs and sites do not work or are unresponsive.

I was able to generate a Highjackthis log by renaming the Highjackthis program at which point it ran. I have attached the log.

Any help would be greatly appreciated!!!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:46:00 PM, on 9/10/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Program Files\CA\CA Internet Security Suite\casc.exe
C:\Program Files\CA\CA Internet Security Suite\CA Anti-Virus\cavrid.exe
C:\Program Files\CA\CA Internet Security Suite\CA Anti-Spyware\CAPPActiveProtection.exe
C:\Windows\RtHDVCpl.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Microsoft IntelliType Pro\itype.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Windows\system32\igfxsrvc.exe
C:\Program Files\Microsoft IntelliPoint\ipoint.exe
C:\Windows\System32\igfxtray.exe
C:\Windows\System32\hkcmd.exe
C:\Program Files\D... Read more

A:Malware programs not responding - Windows update unable to update

Read other 13 answers
RELEVANCY SCORE 60.8

This was a nasty virus. I would attempt to run windows update but it would give me an error code and told me to check my connection. Norton would not update. Most free AV I could download but not update. When I would do any search on Google or MSN, it would redirect. It would also give me a google page does not exist if I went to a windows download update sit. After 2 days of working on this issue and using every AV I could find, I stumbled across a google group addressing this problem. It said to access this website, http://www.softpedia.com/get/Antivirus/Trojan-Remover.shtml This trojan was nasty but the program took about 5 minutes and cleared it. I didn't even have to go into safe mode. If your having this same issue, give this a shot before reinstalling anything, Hope it helps.

A:Unable to auto update windows/anti-virus won't update?

I am moving this to the Am I Infected forum from the HiJack This forum as no logs have been posted. ~ OB

Read other 3 answers
RELEVANCY SCORE 60

Windows 7 prof started installing updates before shutdown. When computer turned on again, it would not boot and the mouse was not to be found. Error message said could not repair the problem and showed option of system restore. Since there was no mouse working I had no cursor and could not choose system restore as a result. After two or three tries, I did control alt delete during startup and windows loaded normally. I think it finished configuring updates then acted normally. Afraid now to turn it off. Any ideas?
 

Read other answers
RELEVANCY SCORE 59.6

It is a few months sine I have been able to update. I have searched and tried advice to others, but have found, or not found update in my Computer>Manage>Services&Applications>Services folder
Can I do anything apart from a reinstall on Windows Vista Premium?

Thank You
 

A:Windows Update not in Services

Read other 12 answers
RELEVANCY SCORE 59.6

I would like help with the following error codes. I'm using Windows7 32bit system
Update Error codes: 0x80070002 Phase 40 = Post-reboot install failure. &amp; 0x8024000C FATAL: Unable to initiate asynchronous search: These codes are relating to Windows Update Database, and Windows Update components must be repaired. Also it says Update Services are not running. I do have the Update Logs if required?

A:Windows Update Services

Hello Marc and welcome to Seven Forums.

This previous Forum thread may help.

How to repair the windows update service

As a precaution it would be advisable to create a system restore point "just in case." Or better yet, a system image. If your computer gets even worse you could restore it to its current condition and be no worse off than you are now.

System Restore Point - Create

System Restore

Read other 1 answers
RELEVANCY SCORE 58.8

Using Start, All Programs, Widows Update browser lands at www.msn.com.

Trying to manually connect to http://windowsupdate.microsoft.com/ also lands at www.msn.com.

Any ideas as to the problem?
 

Read other answers
RELEVANCY SCORE 58.8

When I go to Control Panel-System and Security-Windows Update, and click on the button that says Check for Updates, nothing happens. No error codes, just nothing. The most it will do is flicker, as if it refreshed the page, but that's it. I ran the sfc scan in the command prompt, and that didn't do it. The CBS file is attached. I also ran Malwarebytes, and it found a few things, so I had it remove them. Avast has found nothing. I'm thinking whatever I got infected with corrupted something. And in my haste, I failed to research what the infections were. I'm now trying to run SURT, but it won't install. I get a error message window stating : Installer encountered an error: 0xc8000247. I'm stuck, so any input would be greatly appreciated.

A:Windows Update Not Responding

The SFC scan was clear - but there's not enough background data there for us to be able to diagnose anything...


Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.
Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

Read other 8 answers
RELEVANCY SCORE 58.8

Windows update will not run, get services not running error

1. System Update Readiness Tool (SURT)

I got Installer encountered an error 0xc8000247

2. SFC Scan

There were corrupt files log is included

Thanks any help would be greatly appreciated

Also, this happened after I replaced the internal HD with another using clone from acronis software.

Interestingly enough. I found the exact same problems that another person had... I also had a windows activation problem that I fixed already.

Here is the link to his issues and how it was fixed

Windows Update Won't work after imaging new C: drive

Just now got a windows stating "genuine and activation problem" again

Also found many others having the same problem after upgrading hd using acronis to clone
just google search 0xc8000247 acronis

found article at:
Windows Update Broken After Cloning Hard drive | GeezBlog

https://support.microsoft.com/en-us/kb/982018

To Paraphrase from the beezmo blog

To cut to the chase, SP1 and the hotfix weren’t correctly updating the storage driver, so it couldn’t report sector

size to Windows. The clue here was that fsutil (see that Microsoft link, above) was reporting “bytes per physical

sector” as “<Not Supported>”.

I have confirmed I have the same issue after reading the article and running fsutil

I will have to open my Laptop up to see what HD I put in can't remember its been awhile ago and I left the problem alone and just di... Read more

A:windows Update says services not running

Sounds to me like the IRST drivers...

This may simplybe caused by a bad set of Intel Rapid Storage Technology drivers -

Installing theIntel Rapid Storage Drivers

try downloadingand installing them from here - https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=22194

(you want theiata_enu.exe download)

Once complete,please reboot twice, then post an MGADiag report.
I need to see afull copy of the report produced by the MGADiag tool

(download andsave to desktop - http://go.microsoft.com/fwlink/?linkid=52012)

Once saved, run the tool.

Click on theContinue button, which will produce the report.

To copy the report to your response, click onthe Copy button in the tool (ignore any error messages at this point), and thenpaste (using either r-click/Paste, or Ctrl+V ) into your response.

Read other 1 answers
RELEVANCY SCORE 58.8

I reinstalled Vista, everything was working fine, apart from the fact that there was a virus on my computer which i had to get rid of.

Now, the problem is that whenever i try to open up a file, a blue screen comes up and my computer crashes. I looked for a solution from windows and it appeared that because my NVIDIA hasn't been 'installed correctly' or has 'expired' is causing my computer to crash. I remember i had this problem a couple of months ago and windows update fixed it.

For the last couple of days i've been trying to update my windows, however, it keeps failing with a particular error code. This code recommends me to go onto Services and check my Background Intelligence Transfer service and Windows Event log. Windows Event log is fine, however my BITS service won't start saying: (Something along the lines of) Background intelligence service has started but stopped at local computer. Some services stop automatically when not in use by programs or other services.

I also realized that my netlogon service won't start either. When i was attempting to fix the BITS problem with advice online (http://helpdeskgeek.com/how-to/background-intelligent-transfer-service-will-not-start/) When i typed in net start bits into command prompt, error 5 appeared. (Access denied, and this was supposed to restart my BITS, so currently all hope is gone)So i checked my netlogon on services and it turns out my netlogon (on manual): Started but stopped at lo... Read more

A:Windows won't update! Services won't start.

Please perform the following, so that we can get the exact specs of your computer. This will better assist us in helping you more.Publish a Snapshot using SpeccyThe below is for those who cannot get onlinePlease take caution when attaching a text file to your post if you cannot copy/paste the link to your post, you will need to edit it to make sure that your Windows Key is not present.You are getting Error 5 due to you not using an elevated console. Go to Start > All Programs > Accessories > right click on Command Prompt then select Run As Administrator.

Read other 19 answers
RELEVANCY SCORE 58.8

Hello all, let me start from the beginning.
I was attempting to install a game that required an install of Microsoft .NET Framework 4.0. For some reason this would not install properly. After searching about for a while I found a few people saying that downloading the latest Windows update was necessary.
"Oh great, a fix!" I thought, but to my dismay, every time I attempted to update I was presented with the following error message.

"Windows update cannot currently check for updates because the service is not running. You may need to restart your computer."
I tried restarting a few time to no avail. I tried switching to never update, restarting, and switching back to auto update. Didn't work. I thenk looked into my services.msc to see if it was stopped, but I can't even find it in the list. I know for a fact
where it SHOULD be, I'm not overlooking it, it's just not there. I'll attach a screen cap to show you.
I need some help here. I've tried the Microsoft fix it tool that many people have suggested also with no luck. I'm not exactly a computer expert, so replies in as-close-to-layman terms as you can would be greatly appreciated.
Thanks in advance,
Mike

A:Windows update not found in services.msc

Hi Mike,


I suggest you perform a
system restore to check the result.


If the issue persists, you can also try the following:


1. Try to take the step 5 in this KB to Register Windows Update engine files.
 
2. Use
System File Checker tool to scan the system.
 
3. Startup Repair from the Windows Recovery Environment (WinRE)


For detail steps:

1). Insert the Windows 7 installation disc into the disc drive, and then start the computer. 
2). Press a key when the message indicating "Press any key to boot from CD or DVD ?". appears.
3). Select a language, a time and currency, and a keyboard or input method, and then click Next. 
4). Click Repair your computer. 
5). In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next. 
6). At the System Recovery Options Dialog Box, click on Repair your computer.
7). Click the operating system that you want to repair, and then click Next.
8). In the System Recovery Options dialog box, click Startup Repair.



Hope this helps

Vincent Wang
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 58.8

Hello all,

I could not find this topic anywhere on these forums, so here's my question: I use Desktop Maestro from PCTools to clean my registry, clean out temp folders, etc. This program also allows you to "tune" Windows services. Now I read somewhere that Windows Update doesn't download all available updates if you do not have all the default services running. Is this true?

Thanks in advance.

Read other answers
RELEVANCY SCORE 58.8

Hi!
 
I own an Acer Aspire One D255. It is a netbook. It is not a very reliable machine based on its performance, so after doing some oogling and googling, I found several websites that recommended I disable certain services to improve the PC speed. After having done so, the operating system reported that it is not a genuine copy of windows 7 starter. That is impossible since i factory reset this machine about three times already. I was wondering if anyone can help me figure out exactly what services need to be toggled. I would seriously appreciate any help. Thank you.

A:Edited services.msc now windows 7 won't update

The obvious:  either undo all changes made to services...or factory reset again...would be the obvious alternatives.
 
Services - Restore Default Services in Windows 7 - Windows 7 Forums - http://www.sevenforums.com/tutorials/236709-services-restore-default-services-windows-7-a.html
 
Any issue with Windows being genuine...needs to be addressed via Microsoft, if such continue.
 
Louis

Read other 1 answers
RELEVANCY SCORE 58.8

Just installed WSUS on our server 2003 server. But I can't access the WSUS console. Everytime I click on the icon it opens up a browser attempting to find http://servername/wsusadmin and page not found error.

Any ideas what could be the problem. Its probably something simple I've overlooked. Been looking at he microsoft website but the entire thing just seems to be links to more links and finally a page with very little information.

thanks
 

A:Windows Server Update Services

Read other 6 answers
RELEVANCY SCORE 58.4

my computer for some reason will not auto update I have it set to auto update and the logo appears every time i shut down. I tried to check with microsoft and I had no joy. I recieved the error code ox643 but could not find what this means would appreciate any help in resolving this sincerly dinger08.
 

A:windows xp won't auto update

Read other 15 answers
RELEVANCY SCORE 58.4

How Off Auto Update in Windows 10 OS ?

Read other answers
RELEVANCY SCORE 58.4

I woke up this morning to find my computer (Previously running windows 7 well) had automatically updated to windows 10? i did not authorize this update and it's actually messed up my computer. It wont allow me to connect to the internet or revert back to windows 7?! This is kind of ridiculous and invasive in my opinion, can anyone help me revert from windows 10 back to windows 7? I don't have my disk with me currently.

Read other answers
RELEVANCY SCORE 58.4

Why dose win 7 auto update always install perfect security patches, but updates for Outlook and office 2007 always fail to install. Do I have something disable or a case of malware?

Read other answers
RELEVANCY SCORE 58.4

The Automatic Update service is not shown as a service in the windows services list, and when I try to configure it its not grayed out, and the BITS service is running, and Im running XP.

I need some help on solving this problem.
 

A:Windows update not shown in services list

try this

start > Run > regsvr32 wuaueng.dll
 

Read other 1 answers
RELEVANCY SCORE 58.4

First time post but I am hoping that I can get this fixed. I have been experiencing a ton of issues with my laptop. I am running Windows Vista Ultimate on a Fujitsu S7110 with and Intel Core2 T7200 Processor, 2Gb Ram.

I was told to download some hotfix for Vista and install it and since then I get zero internet, Kaspersky fails to load a bunch of components and it generally runs like crap.
When I mouse over the wireless connection icon it tells me that "Connection Unknown The dependency service or group failed to start"

It freezes and soes all kinds of weird things. I have looked at teh services to try to start ones that are turned off like the DCOM service but they just hang at "Starting" and never work. It seems to work a little better when Kaspersky is closed but still no network services.

Here is my Hijack This log....

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:33:50 PM, on 22/07/2008
Platform: Windows Vista (WinNT 6.00.1904)
MSIE: Internet Explorer v7.00 (7.00.6000.16681)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\System32\hkcmd.exe
C:\Windows\System32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Fingerprint Sensor\ATSwpNav.exe
C:\Program Files\Fujitsu\chitose\updatenv.exe
C:\Program Files\Fujitsu\Fujitsu Hotkey Utility\IndicatorUty.exe
C:\Program Files\Fujitsu\BtnHnd\BtnHnd.exe
C:\Program Files\Fuji... Read more

A:Windows update causing services problems...HELP!

It turns out it wasn't the Windows Update. I managed to navigate my way through the ridiculously slow windows and uninstall the most recent update. I am however still having problems with my Windows services and Kaspersky. If anyone has some ideas on how to repair the multitude of service errors such as authentication service is unknown and dependency service or group has failed to start PLEASE HELP!
 

Read other 2 answers
RELEVANCY SCORE 58.4

I have done everything I could do to get these services to running out of options. any Ideas?

A:Cannot update windows 7 pro because services wont turn on? Please Help

In Services Windows Update does not show 'started'? Left click to Highlight it, right click to open it.
Does it say stop or start? If wupdate showed started this would show stop and vice versa.
I'd do a system restore to some earlier date when it may have been working.

Read other 1 answers
RELEVANCY SCORE 58.4

....otherwise.

I just got my laptop from service (they replaced a new hard drive and installed windows 7). It is a Sony Vaio ....i own it now but it's a slightly used rent-to-own type of deal so no windows dvd or system restore or anything.

They supposedly restored my computer to factory setting but I can't update my computer.

The bar to the left is red and i see a red shield with a white x and it says most recent checks for updates: never

updates were installed: never

i go to installed programs and nothing has been installed since early 2010.

It's like whenever i try to click check for updates button it's like something is blocking it from connecting and scanning is the best way I can explain it. I desperately need help to update all my software and security patches etc
I found something online where it says to type services.msc and stop it and go to c/windows/softwaredistribution and delete the files and then start the service so then ....
windows updates still won't scan (windows 7)....says service is not running but it is.

A:Windows update won't run/scan.it's on in services but computer says...

Download the free version of Malwarebytes : Free anti-malware, anti-virus and spyware removal download update it, run it.
If any threats found, make sure all are selected (check mark beside their names) and select 'remove selected'. A log in notepad will open. Copy and paste that here.
Also see this- How do I reset Windows Update components?

Read other 2 answers
RELEVANCY SCORE 58.4

i3 toshiba laptop, windows 7 home premium 64bit

Hi all

after finding and removing malicious files with malwarebytes in a regular user account, I noticed windows update was not working (not installed please reboot error) so I checked services.msc to see if windows update needed restarting. but it was not there.

IN both the admin account and another regular user account on the same machine windows update works fine and is present in services.msc

any ideas on how to restore windows update and get it working in the affected user account?

cheers

Don
 

A:windows update not in services.msc regular user

Hi crook,
Windows Update service is not related to different users, but is rather a system-wide process.
If Windows Update shows properly in an Admin account, then it's working.
Limited accounts do not display that service, for security reasons.

askey127
 

Read other 1 answers
RELEVANCY SCORE 58.4

Hey, I've been using the beta for a while and have been working under the assumption that winupdate was running in the background doing its thing, however now upon launching windows update I get the red cross shield and 'check for updates' button, which upon clicking gives an error message"'windows update cannot currently check for updates, because the service is not running. You may need to restart your computer'Restarting does nothing, upon checking services.msc, there IS NO WINDOWS UPDATE SERVICE! I have the wuaueng.dll, and wusa.exe, but am unable to use wusa to install microsoft updates manually (such as the windows media player fix for corrupted mp3s), when I try to launch a .msu file I get this:'Installer encountered an error 0x80070424The specified service does not exist as an installed service'So how can I install... the windows update service?!I have tried sfc/scannow in cmd and it told me that it did not find any integrity violationsI'm on beta 7000 ultimate x86

A:windows update service missing in services.msc

Do you have the following registry key info below? It is very likely that your computer/network is infected with a variant of the Conficker virus. One of it's first attack actions is to cripple the Windows Update service to prevent itself being removed by thngs like Windows Defender or the Maliscious Software Removal Tool. Even though Win7 does not have any vulnerabilities conficker can attack, it also attacks accounts with weak or blank passwords.Review: http://www.microsoft.com/security/portal/SearchResults.aspx?query=confickerDownload and run MSRT - http://www.microsoft.com/security/malwareremove/families.mspx==========
Key Name:          HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv
  Name:            PreshutdownTimeout  Type:            REG_DWORD  Data:            0x36ee800
  Name:            DisplayName  Type:            REG_SZ  Data:            @%systemroot%\system32\wuaueng.dll,-105
  Name:            ImagePath  Type:            REG_EXPAND_SZ  Data:            %systemroot%\system32\svchost.exe -k netsvcs
  Name:            Description  Type:            REG_SZ  Data:            @%systemroot%\system32\wuaueng.dll,-106
  Name:            ObjectName  Type:            REG_SZ  Data:            LocalSystem
  Name:            ErrorControl  Type:    ... Read more

Read other 22 answers
RELEVANCY SCORE 58.4

I've tried many things, including scanning for malware, doing a sfc scan, reinstalling windows (four times), manually installing windows service pack 1; using microsoft's FixIt tool; trying to activate Defender + MS Security essentials; restarting the services from services.msc; checking my RAM for errors with windows diagnostic...

im on my last wits :** (

Windows Update can't run becasue the services aren't running

Windows Defender gives the following error:
"service has stopped" and when you click "start now", it times out and gives another error. i read online that defender is needed to start, for update to work, that's why i tried this.

When I tried to install Service Pack 1, it gave me "catastrophic error" 0x8000FFFFF, which seems to mean I'm in deep bleep, judging from a quick search result

As mentioned in my topic title, I've done a SMART scan and my HD is a-okay. This is my second, clean reinstall of Windows 7. I've scanned for malware and viruses with several scanners -- clean. CBS log part 2

A:Windows won't update because the services aren't running (ps: they are)

okay i can't figure out how to attach the full CBS document because it's 600KB+

Read other 6 answers
RELEVANCY SCORE 58.4

Hey guys, so I've been desperately trying to solve this problem for a while and no luck yet. Windows Update is just refusing to work on my XP, but I guess the problem is quite complicated since I couldn't find a solution yet.
- There are technically 6 updates that won't install with Windows Update Agent, but it won't even show others. They download alright, but they just won't install.
- Alternatively I tried using the update site of microsoft, seems like I can install other updates that way, not these ones though.
- The problem doesn't seem to be in any connection with these updates, because the wuauserv is also missing from the services.msc list. I have it in the registry though.
- I tried re-registrating and re-installing practically everything connected to windows update, but I just can't get it working.
- Scanned the computer with avast, both normally and in boot-time, found nothing.
I have actually no idea what should I do next, or where to look for the source of this problem.
I would really appreciate any help :)) Thanks :))

A:Windows Update not working - missing from services

Hi and welcome to TSF did you try this How do I reset Windows Update components?

Read other 19 answers
RELEVANCY SCORE 58

I have just started to use Windows Defender on W8.1 and cannot see a way to get it to auto update without getting all the other Windows updates to auto update as well. I prefer to manage the general Windows updates myself and decide when (or if) to apply them. However, like other AV products, I would lIke it to update automatically.

Any thoughts on how to do this - it must be able to do it

A:Auto update Windows Defender

I thought it did by itself? First off, you can set windows updates to only install important updates, and uncheck the box that says give me recommended updates the same way I receive important updates. That way you do not have to install recommended updates. Important updates should be installed no matter what, they protect your computer, etc.

If you don't want to do that, then see if it auto-updates despite the windows update being off, on its own. Give it a few days. If it does, you got it! If not, there is a high high chance you cannot do anything to keep it updated, as it is a built in windows feature

Read other 8 answers
RELEVANCY SCORE 58

Hi..
I've got a fresh install of windows XP pro SP2, that is currently downloading a 1.3GB update for a game.. however windows has downloaded some updates and keeps bringing up this dialogue box that gives me about 4 mins before the machine will automatically restart - thus cancelling my download (which is about a quater of the way through).

Is there a way I can just stop this from coming up like stopping a service or something? I just don't want to be sitting in front of the computer clicking "restart later" every 10 mins or so..
 

A:Windows update: Auto restart

Just click restart later as many times as you need.
 

Read other 1 answers
RELEVANCY SCORE 58

Hi , every one ,

everyone thing granter that if you install new windows than you need update it .But each new windows , you need download several service pack and security update , however size very big (more than 50MB , about 70 service pack) .How to only once download but update for much install windows .

Help me !!!!!!!!!!
 

A:Download and update windows Auto

What?

Is your English a little weak? I build and repair computers so I do a lot of OS installs. I have a fast Cable Internet connection and this helps a lot with the time it takes to update
 

Read other 3 answers
RELEVANCY SCORE 58

Any suggestions? I forgot to switch off auto updates and now Windows 10 auto updated/installed now hardware not functioning correctly, drivers aren't being recognised, can't install drivers from Disk, unable to connect to Internet. I have no OS disk to reformat or a restore point to revert to

A:Auto update to windows 10 ruined me

i think there is no option to rever back to windows 10 to windows 8/7 version. if you have recovery disk then go to revert back try to install fresh window 7/8 if having recovery disk

Read other 21 answers
RELEVANCY SCORE 58

Hello,

I use a vitualization type software called Toolwiz Time Freeze that on a restart removes all your downloads etc of the session.
It gets abit annoying when a Windows auto update starts downloading/installing when you know that TTF will be removing the update on the restart (that is also needed to install Windows updates).

Any advice on how i can get windows to tell me what important updates i need, WHILST having the option of when i can download and install them?

Many thanks for any help.

A:Turn off Windows Auto Update

See this tutorial by Brink:
Windows Update Settings - Change

I have mine set to "Check for updates...", and that works for me.
I get notified, but it's up to me, if and when to download and install them.

Read other 3 answers
RELEVANCY SCORE 58

As we all know, Windows interrupts a shutdown, usually at the end of a day, to start downloading an update. I want to be able to delay this to give me time to create a Restore Point, in case the update messes up my machine (it does happen). Before I had Windows 7 clean reinstalled I had this set up so I know it can be done. (There are help files about delaying the automatic restart after an update but that is not what I want.)

So how can I delay the actual update please?

A:How to delay Windows auto update

The best way surely is not to have it set to automatic update at all, but to set it so you choose when to download and install. You then have as much or as little control as you want, and whether you install the updates altogether or in batches the process will automatically involve creating a system restore point before the installation starts. To change the settings go to System Security in the Control Panel.

Read other 1 answers
RELEVANCY SCORE 58

I am using windows 7 Home premium 64 bit. It started using a lot of RAM around 3.5 GB and sometimes 3.85 GB out of 4 GB on enabling automatic updates, but when I disable updates the RAM usage drop downs to 1.3 GB. Why is that?

A:windows 7 using too much RAM on enabling auto update

Maybe try using your Resource Monitor and see if the upgrade is the culprit or something causing the
memory leak. You could also look into the Task Manager for extended usage.

Read other 9 answers
RELEVANCY SCORE 58

Hey mates,

This is a very "beginner"question. I'm somewhat familiar with windows (not as much as I thought or wanted to be) , but basically the problem is this. Windows shuts down on a regular basis in the middle of work, quitting every program, reboots, and isntalls updates. I am pretty sure this is related ot the "action center" and whatnot, but how do I control that so that it
asks if it wants to restart (in the past, it asked to postpone 10 min, 4 hours etc) now it doesnt' seem to be doing that.
where I set how frequently it does that.

Thanks.

A:Windows 7 Auto-update (controlling it)

This workaround will stop it happening: Disable Install Updates And Shutdown Option In Windows 7/Vista

Or you can reconfigure Windows Updates:

Read other 7 answers
RELEVANCY SCORE 58

Yesterday I received standard notification of update ready to install. After clicking the shield I chose install. All seemed to go well. The install was a security update for .net 2.0. After reboot, I got the same notification. I installed and rebooted again. Guess what... it continues to ask me to install this update.

I tried changing Windows update to notify only. When I do that and uncheck that particular update and select 'do not notify me' for that update, I still get notified that I need the update.
I even tried install .net 3.0. Still getting notified.

Can anyone help on this?
 

Read other answers