Over 1 million tech questions and answers.

No Boot, loud fan, Dell Precision 390

Q: No Boot, loud fan, Dell Precision 390

I have a Dell Precision Workstation 390. When I boot system, first the fan is loud, then it quiets down, then the startup screen appears with the dell logo and the usual F2, F12 options and then the fan revs up and that's it. Power button is green. System is rarely used, purely a backup system in case my main system, its clone, ever fails so no dust. Every so often I start it up to make sure it is working and to update Windows, Norton etc.
How do I proceed from here?

RELEVANCY SCORE 200
Preferred Solution: No Boot, loud fan, Dell Precision 390

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: No Boot, loud fan, Dell Precision 390

Any beeps from the tower? If you press F12 at boot, can you to get a menu with options to run the diagnostics?
What color are the diagnostic LEDs on the front panel? If they don't all go off, look up error code in the manual:
downloads.dell.com/.../precision-390_setup guide_en-us.pdf
When was last time you replaced the motherboard battery?

Read other 3 answers
RELEVANCY SCORE 63.2

Hello,
I tried to install the newly released Dell Precision Optimizer v3.5.5 (A00) August 18, 2016 on my Precision 5510, running Windows 7 64bit.
During the installation, an error panel pops up with this text:

> SetupNew\setup.cpp (140)PAPP:PVENDOR:PGUID:[email protected] Vista Service Pack 1 (7601)IE Version: 9.11.9600.18426
The installation then fails and the installer log shows the following:
[08/25/16 13:16:06]    Open file: C:\ProgramData\Dell\UpdatePackage\Log\Application_KKJH9_WN32_3.5.5_A00_2016-08-25.txt[08/25/16 13:19:12]    User Command: attended[08/25/16 13:19:12]    DUP Capabilities Value: 2097151 (0x1FFFFF)[08/25/16 13:19:12]    DUP Vendor Software Version: 3.5.5[08/25/16 13:19:12]    Local System/Model Compatible with this Package? Yes[08/25/16 13:19:12]    Local System OS Version: 6.1.1.0[08/25/16 13:19:12]    OS Compatible with this Package? Yes[08/25/16 13:19:12]    Local System OS Language: DE[08/25/16 13:19:12]    Language Compatible with this Package? Unknown[08/25/16 13:19:12]    User Parameter: logfile[08/25/16 13:19:12]    User Parameter: logfile changed to: C:\ProgramData\Dell\UpdatePackage\Log\Application_KKJH9_WN32_3.5.5_A00_2016-08-25.txt[08/25/16 13:19:12]    Extraction-miniunz path: C:\PROGRA~3\dell\drivers\APPLIC~1.5_A\miniunz.exe[08/25/16 13:19:12]    Extra... Read more

Read other answers
RELEVANCY SCORE 61.6

Hello everyone,
I have an Dell precision 960 which won't boot, during boot it beeps short twice, and the post lights 1,2,3 are lit, in the manual it says that you have to look on the screen for further problems, but the pc doesn't give video out.
the pc has 16g ram allocated on 1st 4 slots and has a low-end graphics card installed, no DVD, HDD connected to eliminate them.
thanks in advance:
JurgenMK

A:dell precision wont boot

I don't see a Precision 960 listed -- is this an Optiplex 960?  Or is it a Precision 690?
If it's a Precision 690, the very first thing to look for is the presence of bad or leaking capacitors on the mainboard - particularly near the memory socket and CPU socket.  If any are bulging or leaking a brownish substance, the mainboard will need to be replaced.  These systems were very well known for capacitor failures.
There's a set of four diagnostic LEDs on the system -- what pattern of off/green/amber shows on those?

Read other 1 answers
RELEVANCY SCORE 61.6

Hi Guys,
I have acquired a Dell Precision 590 workstation which has a boot issue that I cannot seem to solve.  The machine goes through it's POST and boot procedures and I receive messages stating that it cannot find SATA 0 or SATA1 it then gives me the option to press F1 to continue or run setup.  After I press F1 the machine continues to boot into Windows normally.  I cannot seem to get the machine to boot straight into Windows without pressing F!.  I'm not sure how to correct this issue and would appreciate any assistance you can provide.  I realize that this machine is a bit old but I would like to get it up and running correctly so that I can reinstall Windows and drivers.  Despite it's age this machine still has considerable processing power.and I would like to get it working if possible.  Thanks for the assist.

Read other answers
RELEVANCY SCORE 61.2

I have 2 M4500, and I have a same problem, when I will open the device, I had seen this message:
No Boot Device Found. Press any key to reboot the machine.
How can I solved it??
Please answer me, I'm really need it.

A:Dell Precision M4500 - Wont boot

Hi mahmoud issa,Thanks for posting.Apologies that your system isn't working as expected.  Without knowing more details about your system, we can only guess at a solution.  Here is some information that may be helpful:  http://dell.to/2mORDuu

Read other 1 answers
RELEVANCY SCORE 61.2

Hello im new in this forum, and was wondering if anybody can help with my problem,
this morning i took my computer apart to clean it, (which i have done several times)
and the computer wont boot, i dont have any diagnostic lights on, the power button is solid amber color.
i tried disconnecting every piece of hardware to try to see if its a hardware issue and even with everything unplugged same thing, solid amber light with no diagnostic light and no beeps (i think there is no internal speaker) i have repeatedly check all connectors.
**I am somewhat techsavy

Thank you for your time!

Read other answers
RELEVANCY SCORE 61.2

I have a new Dell Precision T5600 workstation with A11 bios. I want to use network boot. F3 does not work. Going into the bios system setup (with F12) and changing the boot sequence to put the onboard NIC first did not work. Any clues?

A:Dell Precision T5600 network boot

Never mind, I stumbled across the bios setting. The Onboard NIC has to have PXE enabled before it will show up as a boot target.

Read other 5 answers
RELEVANCY SCORE 61.2

Hi Guys,
I have a Dell Precision 690 Workstation.  I want to reinstall Windows 7 but the CD ROM does not appear in the Boot Menu.  The drive is visible from within Windows, so I'm at a lose as to why it's not listed as a boot device.  Any help you can provide would be appreciated.

Read other answers
RELEVANCY SCORE 61.2

Older desktop running XP Pro. Had some problem booting yesterday; and today am unable to boot up at all.
Problem area seems to be the CD drawer.

Fairly sure that boot sequence is CD then C and then perhaps A (diskette drive).
Yesterday, it took several tries to boot the desktop, and I noticed that the green light on the CD drawer often kept flashing even after I had been successful. I ended up using a paper clip to open the drawer and left it open for the remainder of the day.

Today unable to boot successfully.
At one point screen showed some brief text, I believe whatever is typical at starting up sequence, but this immediately went dark. It seemed like the CD drive and drawer were trying to be accessed.

After several abortive attempts, I did a text message with something like
I believe Checksum error or Sum error but very far from being completely sure on what error code.
Previous attempts at starting computer have failed, please contact Dell for support.
While yesterday I had been successful at some point in getting CD tray to stay in the open position, and not keep closing - today I have been unable to do so.

============
At some point I should replace this old machine. If I can get it up and running again, I expect that I should take the CD drive out of the boot sequence (or put it after C drive).

I do not have any bootable CD at the office, and not sure if I have one at home either (this is computer I used to use at home and now have in office).

Thanks for any s... Read more

A:Unable to boot desktop (Dell Precision 450)

Read other 9 answers
RELEVANCY SCORE 61.2

So earlier today I was playing a game on my Dell precision T5510 and all of a sudden it powers down and wont boot back up...every single time i turn it on it shows led # 3 and 4 blinks number 4 twice then turns on led 1 and never continues..I have a Geforce GTX970 in the PCI connector and it has both processor sockets full and has 8GB RAM per core...and from the error sheet provided for the computer it states that it has something to do with the memory. Please tell me if im doing something wrong because tech support has been one massive circle.

Read other answers
RELEVANCY SCORE 60.4

So I got the TB16 to use with my Windows 10 Precision 7510. I've had issues with the USB devices dropping out randomly but I seem to have got that under control (for now). I'm having another issue of sorts. Updated the BIOS then went into the BIOS changed restart/shutdown to "thorough" and checked "thunderbolt adapter boot support" and "thunderbolt adapter pre boot modules" as I wanted to boot from a USB DVD drive that was connected to the TB16. But when I tried to boot the laptop got stuck on the Dell logo and wouldn't go into POST. I tried diagnostic boot and got the same result. Couldn't get far enough to press F2 or F12. When I disconnected the TB16 and powered on the laptop it booted up fine. I could then connect the TB16 and it would work fine. But if I tried to restart with the TB16 connected I had the same issue. I eventually unchecked "thunderbolt adapter boot support" and "thunderbolt adapter pre boot modules" just so I could restart without having to disconnect the TB16 (I don't know which of the two options is causing the booting issue though). I can get by without booting from the TB16 but I got it partly for that reason so would to get it working if I can. Any ideas?

A:Dell Precision 7510 TB16 Boot Issues

n00b2
So I got the TB16 to use with my Windows 10 Precision 7510. I've had issues with the USB devices dropping out randomly but I seem to have got that under control (for now).
It might be if the devices are intermittent, they would exhibit problems during a Pre Boot Scan.
I wanted to boot from a USB DVD drive that was connected to the TB16. But when I tried to boot the laptop got stuck on the Dell logo and wouldn't go into POST.
You are wanting to boot a UEFI capable DVD, such as the Win 10 Install media, connected to the TB16?  If that is the case, I can test to see if I can do it.  I am wondering if the Thunderbolt is connected to the PCIe bus if any device there will be checked for boot compatibility.  
I suppose you can boot from that USB DVD when connected directly to your system?

Read other 1 answers
RELEVANCY SCORE 60.4

I am trying to get my computer to boot up using only one hard drive. Currently it will only boot up
if all 3 drives are connected. I am sending a screenshot of the disk management screen so
someone with know how can diagnose why all 3 are interconnected and need each other.
I bought a stand alone drive copier to copy my hard drive to a larger drive. I would like to make the copy of the "C" drive on the 250 gb. drive shown but I think if I change something on that drive the comp. will not boot at all.
I hope that i conveyed this so that people can understand because it is somewhat confusing. My computer skill level is decent but i need assistance on this.
I would add a second drive once I clear this up.

Thanks,

Joe

A:dell precision 380/ win 7 / 3 hard drives all needed to boot

Because you have all three drives with a partition marked Active. Windows thinks all three are needed for boot when they're marked active. You need to mark the other two partitions on other two drives as "Inactive". Leave drive C "boot" partition as active.

Partition - Mark as Inactive

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,
I just got a new Precision 7510 and can't figure out how to get it to enable numlock automatically on boot.
I checked the BIOS and that is enabled already.  
I would like this as I am running WIndows 10 and it is setup to login with a numeric PIN.
Does anyone know how to do this?
Thanks,
Jim

Read other answers
RELEVANCY SCORE 59.6

Hi everyoneI bought last week DELL T-5810 workstation. It has Xeon E5-1620v3 (3.50GHz) , 16GB RAM (DDR4 – 2133MHz), 1TB / 7200rpm and I added an TRANSCEND SSD 220S TS480GSSD220S, 480GB, SATA III, 2.5' on it.
I have clean install of windows 10 on it.
My problem is: Whenever I press power button to start the computer, it take 27 seconds (measured with stopwatch) to display the DELL logo and 1 minute to get until the windows lock screen.I tried to change different settings in the bios (i have the latest bios version A16), without any luck. I run diagnostic tests from bios and on dell website , but all tests are passed, and no matter what I did, the DELL logo is always shown after 27 seconds.Also, I found this post which is for laptop machines, but the issue that people are describing here, are prety much the same with mine. Ho help from ther either.When computer starts, it is very, very fast, and I have no complains there. But it is not acceptable for +$2000 computer to boot in 60 seconds. At hime, I have 2 other DELL work stations at home (2 and 3 year olds), which boot in less than 15 seconds.Can anyone help me to resolve this issue?

Read other answers
RELEVANCY SCORE 59.2

I want to install a new SSD Samsung V-nand 850 EVO in a Dell Precision M6500.
I clooned the hard drive. The bios is AHCI.
When i boot the SSD from the Dell Precision M6500 i got the message "inaccessible boot device"
When i boot the same SSD from other Dell (par exemple Inspriron R17) the disk is booting with no problems
The prosed repair didn't worked, the SSD is recognized in the BIOS and DOS-prompt accessible (letters X en E).
So i think it should be a BIOS problem or a driver issue.

Any idee how to solve the problem ?

A:Dell precision M6500 and new SSD Samsung V-nand 850 EVO - INACCESSIBLE BOOT DEVICE

Was the drive cloned in AHCI mode?  Once the cloning was done, did you remove the original hard drive and install ONLY the cloned drive for the first bootup?

Read other 1 answers
RELEVANCY SCORE 59.2

I've got a Dell Precision 7710 with the Dell Precision Optimizer. It works great for when I'm using AutoCAD Civil 3D in setting up the laptop for optimization by turning off 2 cores and increasing the clock speed of the processor. 
Unfortunately I also do programming with Virtual Machines. When I'm in this mode I want all 4 cores to share the load instead of 2 cores. 
Is there a workflow available to go from one profile to no profile? Do I have to do a restart to switch between profiles? So if I'm doing CAD work and then switch over to programming do I have to turn off the AutoCAD profile to no profile and the restart the computer? I tried turning off the profiles and nothing changes for the cores. 
Is there a way to create my own profile? Or should I pick one like 3ds Max that would utilize more cores?  Or should I not use it since it won't meet my needs? 
Thanks.

Read other answers
RELEVANCY SCORE 58.8

Hi, i have problem with my Precision T3500. The issue is this, when i trying boot that machine, i got error 3 & 4 and fans goes at full speed. Here is my video with my problem:

I think is the motherboard problem. If anyone has a solution or answer for this I would be very grateful.
(sorry for bad english :( )

A:Precision T3500 error 3 & 4 + loud fan

Hi lucky512,
Thank you for writing to the Dell Community Forum.
Request you to please remove the memory modules from the system, try one memory module at a time in each slot and then test the system. It could be the memory module or the memory slot on the motherboard causing the problem. You can also try these memory modules on another system to test. Memory error has occurred please refer to this link http://dell.to/1gOqfpM.
Please reply if you have any further questions.

Read other 6 answers
RELEVANCY SCORE 58.4

I have had several Dell Laptops (D630, D830, E6410, E6510, Precision M4500), and with the D630 and E6410 Dell was VERY helpful after the warranty expired (in one case by 5 months).. even replaced a system board or 2 since tons of people were reporting issues similar to mine on the D and E series.

NOW
on my Precision M4500, I called Dell 1 day (24 hours) after the warranty expired.

Issue: The system would REFUSE to boot past the dell BIOS splash screen.
It would finally boot after 10 or so power cycle attempts.

Dell refused to "help" me but did give me some advice
now ... 1 month after the warranty expired - the issue is back

System Info:
Dell M4500
16GB DDR3 RAM (Dell Certified) - issue remains when I use the 8gb in my e6410
bluray drive (I also tried to boot using the dvd drive in my e6410, issue remains)
intel 6250 wifi/wimax card
gobi 2000 card
Bluetooth
i7 cpu
NVidia FX 880 gpu
bios level a15
os: dual boot via GRUB - Ubuntu 13.10 and windows 7 ultimate (both 64 bit)

when it does finally boot, I get a message about intel management engine booting the factory image or something to that effect

it will NEVER boot past the bios splash screen on battery only (even with a new battery)
once booted, I can unplug and get about 2 1/2 hours of usage from the pc

I can access the bios settings with no issues - even on the "no-boot" power ups

once it does boot, there are no other issues

NOW:
after reading on the internet I found this to be a COMMON problem
s... Read more

A:Dell Precision M4500 - Wont boot past BIOS splash screen

I now have 2 M4500 that do the same thing. With Intel SpeedStep enabled, it refuses to boot. Both have SSD drives, 16GB DDR3 RAM, NVIDIA FX880 GPU. one has a i7-940 and the other a i7-920. I hope DELL steps up and fixes this issue in A16 BIOS update.

Read other 9 answers
RELEVANCY SCORE 58.4

Hi, 
I am having a problem with a precision M6700 with a Nvidia K4000m. I installed Windows 10 Pro in the UEFI mode and Legacy ROM enabled. Later, i enabled secure boot from the BIOS and now there is no display. Tried resetting by removing power and removing CMOS battery. No change.
Need immidiate assistance.
Thanks.

A:Dell Precision M6700 Nvidia k4000m no display at all after enabling Secure boot

Sounds like a tough one. Your support site has articles & threads about it.
http://www.dell.com/support/home/us/en/19/product-support/product/precision-m6700/research
Precision M6700 Support site

http://www.dell.com/Support/Article/us/en/19/SLN85632
Computer Does Not Turn On Or Go Into Windows
=== Quote ====
No Video
If the power indications are normal but there is never any video seen on the computer's display during the startup process, this probably indicates a No Video issue.
If you have a desktop computer and the monitor has its own power supply, make sure the monitor has a power indicator showing that it is turned on.
To troubleshoot a No Video issue, click on the links below:

Desktop
Notebook

For a notebook, press and hold the Fn key and then press the power button. This starts the pre-boot testing and will launch ePSA. ePSA will test video with a series of patterns. If they look fine but you want to test more, you can respond to the video test with "N" and ePSA will then launch the LCD BIST test. If you have a no video issue, you can either run the Fn+Power to enter ePSA or D+Power to run the LCD BIST.
=== EOQ =====

http://www.dell.com/Support/Article/us/en/19/SLN292599
Resolve No Power, No POST, No Boot or No Video issues with your Dell Computer

http://en.community.dell.com/support-forums/laptop/f/3519/t/19596949
Laptop M6700 Screen goes blank
Cure: Update the BIOS. Also suggests plugging in an external monitor.

Read other 1 answers
RELEVANCY SCORE 58

Hello,
I'm facing the following issue with a Dell Precision 5510 laptop with latest bios 1.2.14 A13. It appeared suddenly, I just rebooted a working system.
The laptop does not boot anymore and the Dell logo is not shown, however, the diagnostic battery led blinks 2 times white and 2 times amber.
According to the error table that I found here http://www.dell.com/support/article/uk/en/ukdhs1/SLN295101/EN#2016_to_Present that means
System Board : BIOS, ROM Failure
and the suggested next steps are:

Flash BIOS to latest revision
If problem persists contact Tech Support for further troubleshooting
Did anyone had a similar experience?
How can I re-flash the BIOS from a non-booting machine?
I found some tricks for the Dell XPS 9350 (extracting HDR and ROM files from bios executable and plugging a USB drive) but they do not seem to apply to this laptop.
UPDATE
I found http://www.dell.com/support/article/uk/en/ukdhs1/SLN300716/en but I'm still unable to recover the computer. I keep getting the 3:3 blinking pattern, even after I put the latest BIOS (renamed to 'BIOS_IMG.rcv') into a newly formatted FAT32 USB stick (2 GB). I also tried with different USB sticks, and both USB ports.
Any help is really appreciated
Best regards,
alessioc

Read other answers
RELEVANCY SCORE 57.2

This is how I got my T5600 to work from a SSD SATA connected to a PERC 310H card and boot as UEFI. It can also be a SAS drive. In this example I was only using a single drive and have not attempted a RAID setup. 

I may have skipped some parts where you have to reboot. If I refer to the BIOS settings then you would have to reboot first. 

1. Setup hard drive as a NON-RAID drive. When booting it will appear as BIOS handled and NON-RAID.
2. Download the Windows 10 installer onto USB using Microsoft Media Tool.
3. Download the DELL T5600 Payload for T5600 and BIOS files (if needed). Install latest DELL BIOS if you have an existing older OS. 
4. Unzip the DELL driver payload onto the USB drive for Windows 10 and leave inside a folder called T5600.
5. Using a rear USB slot that is NOT USB 3. Go into F2 and load the USB stick under UEFI, it may have a strange name if the BIOS is old (such as INT13). Saqve changes. Reboot. Boot from the USB stick. 

6. Make sure the drive you are working on does not contain data you want to keep. Ideally you would disconnect any drive you dont want to accidentally alter. 
When given the option to select a hard drive, if necessary, delete any previous partitions so the drive is without any partitions. Then click the * NEW button. 
7. After clicking NEW it MUST generate 4 partitions, 3 system partitions + 1 OS partition (made by Windows installer). If it only has 2 partitions it will never work as a UEFI boot volume
8. In... Read more

Read other answers
RELEVANCY SCORE 54.8

I have search for many hours for answers to questions on new Graphics Cards which require 8pin and 6 pin or 8pin and 8pin power connections aside from the motherboard supplied power and what the appropriate method was to connect the GPU cards to the 8 pin pcie power connections. This is complicated by the fact that the Precisions seem to only have 6pin cables installed with the towers regardless of the power supply that is installed.   Yes. Everyone understands hopefully that if you have, for example, a 450 watt power supply ( forget the efficiency aspect of the actual power supply) as I am interested in the mechanics of the  design.
The power supply connects to a PC board, which appears to be called "Power Supply extended card"
Now, looking at the connectors on this extended card, there is a "POWER_VGA1" 8pin connection on this extended card (bottom left black socket).  To this 8pin connector, on my T5600 and seemingly on all the others that have made similar inquiries, we all have a 8pin male connector that fit into the extended card. My 8pin connector has two sets of wires leaving the connector and becoming two 6 pin connectors, one of which 6pin connectors is plugged into my stock Quadro 5000 video card.
OK. So, now most people are wanting to change out the 6pin Quadro card with either an 8pin or 8 pin plus 6pin or 8pin and 8pin graphics card such as a GTX 980TI or GTX 1080 or GTX 1070 or AMDs similar card. 
Having researched the... Read more

Read other answers
RELEVANCY SCORE 52.4

Hello
I just swapped out a e5-2603 CPU and installed a e5-1620 CPU in a Precision T5600.  The PC will not boot, and prior to a forced entering to bios setup, it gives a warning/error
"Your dell current power supply does not support the recent configuration changes made .."
My PSU is a 635W - this should be sufficient, yes??
So is the 1620 not compatible with this model?
thanks for any help, david

Read other answers
RELEVANCY SCORE 52.4

Dell Precision M6400 Win7 64 bit Dell Webcam Central Software.
Long story short, just purchased a M6400, upgraded after purchase with SSD, clean install. Cant Find Win7 64 bit Dell Webcam Central Software.
Please help, no I cant go in to my account and download due to my laptop transfer has not yet cleared.
Webcam is recognized in windows configuration, but not in dell. Already removed win software, but I have no way or nothing to replace with.
 
PLEASE Help  

A:Dell Precision M6400 Win7 64 bit Dell Webcam Central Software Missing

Hi hdpartman,
If the webcam is not working, I recommend uninstalling and reinstalling the webcam drivers.
To uninstall the Dell webcam central software, perform the following steps:

Click Start.
Click Control Panel.
Using the drop-down menu next to View by: in the upper-right corner, select Large Icons.
Click Programs and Features.
Click Dell Webcam Central.
Click Uninstall.
Confirm the uninstall process by clicking OK.
Once uninstalled restart the computer.

I have provided a link below to reinstall the webcam drivers.
http://dell.to/YZkDs3
Awaiting your response!

Read other 5 answers
RELEVANCY SCORE 52.4

The precision 5520 is available with two wireless cards, the dell wireless 1820 (when configured with ubuntu) and the Intel WiFi Link 8265 (when configured with windows 10).  I have the 1820 and ubuntu, but I also want to use windows 10.  When I installed windows 10, the card worked fine.  However, when I installed the anniversary update, the card stopped working.  In the device manager, it said that the device cannot start (code 10).  On the dell website, there are only drivers listed for the Intel WiFi Link 8265 card, and none for the 1820, so I couldn't install any drivers.  
Does anyone know how to make the 1820 card work under windows 10 anniversary?

Read other answers
RELEVANCY SCORE 52.4

I am wondering if a single stick 16 GB RAM DDR3 would be OK for a Dell precision 7500 or 5500. These machines are without RISER. In page 4 of the service manual it states:
NOTE: If any DIMMs are >30mm tall (possible early 16GB DIMMs), they must be installed on the system board only.downloads.dell.com/.../precision-t5500_setup guide_en-us.pdf
has anyone tried with a single stick of 16GB memory? For example I found one here [1]
www.newegg.com/.../Product.aspx

A:single 16GB DDR3 in a dell 7500 or dell 5500 precision

You cant install random density and rank of ram.  Ram must be installed in banks of 3.
http://downloads.dell.com/Manuals/all-products/esuprt_desktop/esuprt_dell_precision_workstation/precision-t7500_Service%20Manual_en-us.pdf
 
You cant install a  4 gig then 8 gig then 16 gig.   If you use 16 gig modules they must ALL be 16 gig modules.  You cant mix ranks and density and speed.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Hi,
Im having problem to connect Dell UltraSharp U2412M 24” to Dell Precision m4700 with Intell HG graphics 4000 via Display port. Only works with VGA cable but does not offer resolution 1920 x 1200. Had this troubles with win7 and now tried on win10 and same resilt. I have tried several different cables but no result. Thanks for any suggestion.

Read other answers
RELEVANCY SCORE 52.4

I have two displays connected to the laptop (one to the native HDMI and one to the docking station). In effect, I am able to drive three displays (Laptop display, native HDMI, and DP from WD15). I wanted to connect one more display to drive four display? 

When I connect the fourth display it's not showing up in the detected displays list. 
How can I do this? Is it possible? 

A:How to drive four displays from DELL Precision 5520 with Dell Dock WD15 and native ports??

It's not going to be possible without some other type of hardware purchase - no.  The internal GPU cannot drive four displays at a time.

Read other 5 answers
RELEVANCY SCORE 52.4

So, initially this Dell came setup with a factory OS on the PCIE based NVME drive.
Recently we re-installed the OS, but the OS setup was not seeing the NVME drive, yet, Bios was reporting it. So we setup the OS on an EVO SSD. We then cloned it over to the NVME after realizing Windows was detecting its presence. Everything worked well, we removed the Samsung Evo and the PC had used the NVME based cloned OS for a few days, but now it decided to lose track of the NVME and only boots into start up repair. Nothing you do does anything; last known good config, restore(none created), chkdsk(doesn't find issues), SFC /Scannow doesn't run(Windows Resource Protection could not perform the requested operation). I then noticed that startup repair fails with a Log file "D:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt.
Clearly the OS now thinks the secondary 2TB drive is now C. I can't help but wonder if this was the reason I couldn't natively install the OS onto the NVME in the first place. There must be some startup delay on the NVME where the order gets shuffled around. Yet, the NVME is still the first boot device in Bios. so nothing has changed there. Ran diags and both drives pass. I unplugged the secondary SATA-based 2TB drive and that at least causes the startup repair failure to end with "Log file C:\WINDOWS\System32\Logfiles\Srt\SrtTrail.txt"
I've had these sort of issues with Precisions in the past.  They aren't as friendly with drive re-... Read more

A:Dell Precision 5810 no longer recognizing Dell NVME PCIE card drive

If the drive was in RAID then that's probably why it doesn't like it. Probably since the PC does not see it as a logical hard drive but as a RAID drvie.

Read other 1 answers
RELEVANCY SCORE 52.4

Hello,
I'm not able to install Dell Command | Power Manager on Dell Precision m6700.
I tried to install driver below (as well as other version) but without success:
System-Utilities_Application_8MJFN_WN64_2.2.1_A00
https://www.dell.com/support/home/pl/pl/pldhs1/Drivers/DriversDetails?driverId=3N7TV
I the description you may find that Windows 10 64bit and Dell Precision M6700 is supported.
The errors is following: "The application is not supported on your system. Abording installation. Error: 25025 ".
@Dell_Support - could you please fix it?

Best regards,
Johnny

Read other answers
RELEVANCY SCORE 52

I am wondering if the Optiplex 7010 will physically accept the 850W PSU from the Dell precision workstation. I can't seem to find any dimensions for the stock PSU in the Optiplex, and the Optiplex has that latch that snaps in front of the PSU.

I am aware that the CPU power on the Optiplex is 4-pin and the Precision PSU only has 8-pin, but maybe I can modify it or get an adapter.
More about : dell 850w precision psu dell optiplex 7010 minitower

A:Dell 850W Precision PSU in Dell Optiplex 7010 Minitower?

Which percision? They all use different power supplies.

Read other 1 answers
RELEVANCY SCORE 52

Hello so my laptop (Precision 1350 Workstation) with windows 7 which i bought in September 2016 stopped charging after I used it with my docking station . It worked for a week or two prior to this and then I started getting a notification every time I put the laptop on the docking station that said "ac power adapter not recognized , use adapter of 65 watts or above" but the adapter was 130 watts. Even when the laptop was taken off the docking station and the ac adapter was just plugged into the wall it still won't charge at all. I made sure the bios was updated 1.11.4 and even checked for driver to update and ran the online diagnostics there was no problems but it still won't charge. A tech came out last Wednesday and replaced the motherboard and this fixed the problem for about a day but then when I put it back on the docking station the same problem occurred and it still won't charge. I even tried it on a different docking station but the same make and model as mine and the problem persists. Does anyone know what is wrong? The phone tecnicians and the technicians don't seem to know what to do 

Read other answers
RELEVANCY SCORE 51.6

Hi,

I'm trying to connect my new laptop Dell Precision 5520 with Dell monitor U-2412H (now approx 4 years old] and I have troubles.
Laptop is having HDMI output only, Display is having VGA, DVI and Display port, so I need any conversion. 
HDMI to VGA conversion (analog ) works, but displayed picture is not fully sharp etc.... 
HDMI to Display port cable - (tested and working between my old Precision M4300 (Display port) and HDMI TV ( Panasonic AS ) doesn't works 
HDMI to DVI ( new cable) doesn't works 
In both digital connections, external display is not detected by video card. 
Built in display is UHD ( 3846x2160) with Touch panel, used display driver is (Intel 630 graphics ] 21.20.16.4664  ( dated as 21.4.2017 ) - but this numbering is incompatible with pure intel drivers versions  (there is noted river version like 15.60 ...
Is this Hardware or sofware issue ?

A:Dell Precision 5520 - DigitalVideo and Dell U-2412H

I don't see a U2412H display anywhere.  I see a P2412H and a U2414H -- which display are you talking about?
You definitely don't want HDMI to VGA because analog video never looks good.
DisplayPort to HDMI only works if the source is DisplayPort and the display uses HDMI.  It doesn't work in the opposite configuration that you're attempting.
HDMI to DVI should work just fine because HDMI and DVI actually use identical signalling as long as it's 1920x1200 resolution or below -- but since I'm not sure what display you have, I'm not sure what resolution you're trying to run.  If it's 1920x1200 or lower and it didn't work, you might want to try a different cable.  If you're trying to run a resolution higher than 1920x1200, HDMI to DVI won't work because DVI can only handle higher resolutions using dual-link DVI, but there are no simple converters from HDMI to dual-link DVI.  In that case, you wouldn't have any way to drive that display from that PC at the panel's native resolution.

Read other 1 answers
RELEVANCY SCORE 48.8

Please help
I have a dell Optiplex Desktop GX280 with a very very loud cpu fan.
When I turn on it gives amber light but no boot, just the fan starts going mad. I have
onboard graphics card. I have
Disconnected all drives and left only motherboard connected,
Reset bios no luck
The only thing is when I take the cpu out and leave cpu fan connected then the fan works fine (no loud noise) so I think it is not the fan but the cpu or a the motherboard / mother board sensor.
I would really appreciate some help as I dont have a clue what it could be. I dont get any beeps from the motherboard at all on boot-up with cpu or without. Motherboard power light goes on inside case.
Please please any advise
 

A:Dell CPU Fan very Loud

Read other 15 answers
RELEVANCY SCORE 48.4

Hi i just upgraded the processor from 2.8Ghz to a 3.80ghz processor everything is awesome but now my fan is so loud but the pc case is not even hot and my pc has no dust how can i fix this
 

A:Dell 4700 LOUD FAN

Read other 16 answers
RELEVANCY SCORE 48.4

O.K, I?ve had my Dell Dimension 5150 for well over 18 months now and I?ve finally had enough of the jet engine noise that it creates as soon as you even think about making the processor do some work!

The system board is a HJ054 800/1066MHZ

I looked at the specs for the board and it doesn?t say anything about it supporting temperature monitoring.

So if I bought a fan that changes it?s speed according to the system temp, am I right in thinking it would run at 100% as there is nothing it tell it otherwise?

I ordered a antec smart cool 120mm case fan only to find that the 3 and 4 pin connectors that came with it do not fit to any connection on my system board or PSU.

I also still have the stock 775 heat sink which I have re -seated many times thinking that it might sort out the problem if the system was causing all this noise due to over heating but as I mentioned earlier, I have no way of finding out what temp my system runs at.

I?ve had a look at some online but most of the good ones say that I?ll need 20cm clearance to install them. I?m pretty sure that I haven?t got that sort of room in my case.

Where do I measure it from?

The top of the system board or the top of the CPU?

Basically I need some assistance in finding a case fan and CPU heat sink that my system board supports and ultimately stop this wailing beast so that I can hear myself think.

All feedback appreciated.

Many thanks,
 

A:My Dell is sooo loud, help

first off, you could start by giving us some specs of your comp

secdondly, what is your budget and etc

and finally, by talking about clearance, i think it means your mobo to your side panel of the case
 

Read other 9 answers
RELEVANCY SCORE 48.4

Hello,
Have a Dell Dimension 4700 with a really loud cooling fan. I mean loud enough where the living room TV volume has to be raised significantly in order to hear it clearly...and the fan is almost always on. I also have a Dell Dimension 8200 which is pretty much silent. Is there a fan I could buy that is quiet and is it something I can install myself (The most advanced thing I've done is install an internal hard drive).
 

A:Dell Cooling Fan - LOUD

Read other 10 answers
RELEVANCY SCORE 48

Hi,

I'm trying to upgrade this computer so that I can use if for music. I took one of the 300gb hard drives out and replaced it for a 2tb - I didn't realise the drives were raided. How do I turn raid off and use it normally.

Also does anybody know the memory cards that are supported - it currently has space for 8 - however there are 4 1gb memory cards currently installed.

Many thanks - please reply asap

Rob

Read other answers
RELEVANCY SCORE 48

Hi:
I need help with my Dell Precision M70 with adm password and where is the EEPROM chip. someone please help me out! :dead:

My email:[email protected]
Thanks
Raul
 

A:Dell Precision M70

Need more information mate.. be more specific..

What about the admin password? reset? or need to set one? Forgot?

EEPROM is general located on the motherboard generally next to the onboard graphics and i dnt know why its generally near there.. google images to see what it looks like
 

Read other 1 answers
RELEVANCY SCORE 48

hello community,
my son have try to upgrade the cpu installing one new Intel Pentium Dual-Core 3.2 GHz CPU E6700 Slguf LGA 775 2 MB Cache.
After installation the pc fail to load. no bios menù, no messages from pc.Same problem after reinstalling old CPU.My son tell me no cpu pin are damaged.
What may have happened ?
Thank you for any suggestion.

Read other answers
RELEVANCY SCORE 48

how do i open the case on a dell precision 370? i want to install a second printer card and can't figure this out
 

A:dell precision 370

http://support.dell.com/support/edocs/systems/ws370/en/ug/skycvrop.htm#1059310

and for all info

http://support.dell.com/support/edocs/systems/ws370/en/ug/skycvrop.htm#1059310
 

Read other 1 answers
RELEVANCY SCORE 48

I have a Dell Precesion 390 workstation that I need to ugrade the CPU in, does anyone know what processors the motherboard will accept?
 

A:Dell Precision 390

You have not told us what motherboard is installed, now which processor. They differ in some Del Precisions... or give us the Service Tag
 

Read other 3 answers
RELEVANCY SCORE 47.6

Hi guys,
we have a lots of Dell Optiplex 7440 AIO-Devices (BIOS: Latest, 1.4.7). Unfortunately the Devices are very loud. The fan noise is not really silent. Is this a known problem? Is there a new bios coming out?

Read other answers
RELEVANCY SCORE 47.6

I have a Dell Inspiron 530 Desktop that won't boot. I get an amber light when i hit the power button and the fans run loudly, but no signal to the monitor and no beeps. I'm no expert with this but I'm not against popping the whole thing open and trying to fix it. Thanks.

A:Dell Inspiron 530 loud fan, but not booting

jerseyduggan
I have a Dell Inspiron 530 Desktop that won't boot. I get an amber light when i hit the power button and the fans run loudly, but no signal to the monitor and no beeps. I'm no expert with this but I'm not against popping the whole thing open and trying to fix it. Thanks.
jerseyduggan
Assuming that you have the Inspiron 530 Mini Tower and not the 530s Slimline version.Is the power button LED, a Steady Amber, or a Blinking Amber?
Does the power supply fan run?Has any changes been made to the 530 recently? Is there a discrete graphics card installed, or are you using the integrated graphics?
The Inspiron 530 MT Troubleshooter and Diagnostic Codes are here:
http://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-530_owner%27s%20manual_en-us.pdf
If the power supply is working correctly, then having no 'Beep's could suggest a motherboard issue
Bev.

Read other 11 answers
RELEVANCY SCORE 47.6

Dell XPS 15 9530
Latest Bios A09
Windows 10 64X
Ran diagnostics one of the fans are bad. One spins at sub 3000 and the other about 6000+
Left side fan is ok right side is loud ( with keyboard faceing up not upside down and closed)
Other fans spin at 3 to 4k so for this particular fan to be "bad" doesnt make sense.
I dont want to buy a new fan if it doesnt address the issue.
Will one bad fan make the other work harder?
Right now the fan is always on and stays on. Iv tried passive cooling and trying to disable speed step and underclock the pc. Still no luck. Fan is loud and always stays on.

A:Dell XPS 15 9530 Loud Fan Will not shut off

Video Fan Error on Diagnostics This is the one that is running the entire time. On the right side
6100 RPM Constant
CPU FAN does 0 to 2400+ RPM Left Side

Read other 1 answers
RELEVANCY SCORE 47.6

I have Dell precision 690 with dual xeon x5355 and I want to use this workstation with single cpu configuration. I googled but no success. Years ago someone told me that dual cpu mobos can run a single processor with a dummy processor installed in second cpu socket.   

Read other answers