Over 1 million tech questions and answers.

No signed device drivers were found while Installing Window server 2012 R2 on a physical server

Q: No signed device drivers were found while Installing Window server 2012 R2 on a physical server

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale USB to install ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

Read other answers
RELEVANCY SCORE 200
Preferred Solution: No signed device drivers were found while Installing Window server 2012 R2 on a physical server

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 99.2

Hello Everyone,
I am new to ATA myself and I am in the process of setting up the all the needed components to get the ATA implemented. 
I plan to setup the ATA server and ATA Gateway on the same server. 
Further to this the DC's, ATA Server and ATA gateway will be all on the same switch. 
I want to mirror the ports trunking with the DC servers to the port where the server running the ATA server and ATA Gateway resides in. 

Q1: Is this OK to do or should the ATA Gateway be installed on a separate server?

Q2: If I install the ATA Gateway and ATA server on separate servers can all the servers be on the same switch. (DC's, ATA Gateway and ATA Server) 
Thank you,
ChrisD 

Read other answers
RELEVANCY SCORE 95.6

Load Driver.
No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.

I just installed a new HDD.
Specs:
Hitachi
500GB
P/N: 0F15629
S/N: JE3VM9HK
MLC: JPT50E
FW: 50E
LBA: 976. 773. 168 SECTORS
CHS: 16383/16/63
RATED: 5V 450mA.12V 700mA
SATA: 6.0 Gb/s
RPM: 7200RPM
HDS721050CLA662
Type: DS7SAC500
C P/N: H3D5001672S

I installed the HDD on a working PC with Windows 7 64bit and went into Computer Management and formatted the HDD and add a simple volume and works fine.

Put back into the new PC installing Windows 7 64bit and this error of not finding the HDD?

Please help.

A:No signed device drivers were found.

Quote:
Put back into the new PC installing Windows 7 64bit



For better help with problems, Can you post your NEW specs.
Filling out System Specs
System Info - See Your System Specs

Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

Read other 4 answers
RELEVANCY SCORE 95.6

I just finished making a custom computer. I am trying to go through the procces of installing Windows 7 on the computer. But when I try to find a driver to install it on nothing comes up. If I browse I can find somewhere to install it but it will not find the Hard Drive. What am I doing wrong? I am really new at this so I may need a lot of help... Here is my system.

Asus p8 z77-v pro motherboard

Corsair XMS3 16GB Memory DDR3 1333 RAM (2x8)

Intel BX80637I53450 Core i5 Processor i5-3450 3.1GHz 5.0GT/s

Western Digital 500GB Caviar Blue 3.5" SATA 3

XFX Core Edition FX-787A-CNFC Radeon HD 7870 GHz Edition 2GB 256-bit GDDR5

A:No Signed Device Drivers Found?

the Asus p8 z77-v pro motherboard uses UEFI, not BIOS so the install process may be different, see here: UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with

Read other 9 answers
RELEVANCY SCORE 95.6

i need help...bad...I picked up a copy of windows 8.1 yesterday (hoping to upgrade it to 10 once i got it. I also already had windows 7 on the computer, so i started the setup from the desktop) it did its thing. I typed in the product key and continued through the process. Then i got to the 'where do you want windows to install?' tab and it lets me pick which hard drive to install windows on. Thats where the problem occured, I can not for the life of me figure this out. I've got a friend who know's a ton about this stuff and i was on the phone with him for at least 2 hours last night. we cant figure it out, I've downloaded the drivers on a flash drive and it wont open. I have the motherboards CD in and it doesn't help. there are no .exe files. and I have spent hours trying to get it to work and it doesn't.
 
My PC specs (If needed)
 
A10 7850k AMD APU W/ RADEON R7 GRAHPICS (CPU)
A88X-PRO ASUS (MOTHER BOARD)
RADEON R7 265 DirectCU II (GRAPHICS CARD)
And standard windows 8.1 
 
 

A:'No signed device drivers were found'

Hello Peoplearenuts Welcome to the Forums  
I don't want to say this but you didn't need to buy win8.1 to get 10; you can install windows 10 for free if you have 7.
But since you bought it​​ lets work on it.

So the first thing to do is not to do a clean install; you want to upgrade the PC threw the desktop
it will automatically assign the HDD based on what your upgrading.
 
Please don't fell bad about this we all make mistakes; believe me I have made some big ones
Also I have had that problem too so this should help you out

Read other 39 answers
RELEVANCY SCORE 95.6

I just build my pc and installing a clean windows ultimate 64bit install and my 500gb d caviar grenn istn showing up i get this error No signed device drivers were found how can i fix this so my hdd will show up.


amd athlon ii x4

gigabyte a75-ud4h

msi r6670r 1gb gddr5

8 gb komputerbay ram

A:No signed device drivers were found

A new hard drive it has to be partitioned first before it can be formatted and become functional in Windows 7. Did you partition and then format the drive?

How To Partition a Hard Drive in Windows 7

This Microsoft Answers forum thread has some additional information.

I get the message when I am installing Win 7 No signed device drivers - Microsoft Answers

Read other 3 answers
RELEVANCY SCORE 93.6

This is going to be difficult since I am the middle man here, but here it goes.

A few months ago I sent my friend a Windows 7 DVD for his new computer that he built, and everything went fine. Earlier this week he was building another one, using the same HDD and disk and he kept getting errors that are still unresolved. He formatted his old HDD and still didnt work, and also got a new 320 GB hdd and same problems. He cant even get Ubuntu to install. ive searched for a few hours and couldn't find a similar problem or solution. The exact error message is "No signed drivers were found. Make sure that the installation media contains all the correct drivers and then click ok." Sometimes he got an error 0x8030001, not quite sure what he did to get that. Anybody have any idea about what to do?

System Specs:
Asus p9z68-v lx
i3 2120
pny 4 GB RAM
Sony Opticarc DVD rw
1 TB HDD

A:Friend can't install, No signed device drivers were found

start from scratch--see this link:

Installing and reinstalling Windows 7

Read other 3 answers
RELEVANCY SCORE 93.6

My new PC & Win7 are having an NTLDR misiing drama. so trying to reinstall win7.
"Cannot install Win7-no signed device drivers were found."
i have a genuine win7CD motherboardCD windows driversCD.

Where on earth are these missing drivers?

A:Cannot install Win7-no signed device drivers were found.

Anysuggestions?

Read other 3 answers
RELEVANCY SCORE 88.8

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 87.6

Hi Everyone,

I have installed syslog-ng server to receiving log forward from Linux and Windows OS.

Now I need to forward Windows Event Logs to the syslog-ng server. As I know there are couple of agent as like datagram syslog (GNU license), snare (Trial) agent could handle the desired task, But I did NOT find the syslog-agent
source, and don?t want use snare trial version.

Everyone can recommend another open source ?
Thank you !

Read other answers
RELEVANCY SCORE 87.6

Hello  I have been asked to load a lenovo P50 Thinkpad with Windows Server 2012 r2.  It currently has Win 10 loaded.  A couple of issues.  When I boot the laptop to the usb the setup screen is very small.  Also during setup there are no drives located to install windows to.  I have a raid 1 setup on the laptop. I am probably missing some information.  Please let me know some suggestions thanks

Read other answers
RELEVANCY SCORE 86.8

HP Pavilion Desktop - 550-020a (ENERGY STAR) Product Number:   M1P30AA I am after 4 drivers for this machine and Windows MultPoint Server 2012 Standard.BCM43142A0 - This is a bluetooth driver - Not really needed Network Driver - Broadcom Wireless (PCI\VEN_14E4&DEV_4365&SUBSYS_2230103C&REV_01) - Not Really neededSM Bus Controller - PCI\VEN_8086&DEV_8C22&SUBSYS_2B2C103C&REV_05 - NeededVideo Controller - PCI\VEN_1002&DEV_6665&SUBSYS_90F11B0A&REV_83 - NeededIs there anywhere i can get drivers for these ?

A:MultiPoint Server 2012 Drivers

Hi: The only suggestion I can offer would be to try the Windows 8.1 drivers and see if they work. http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-550-000-Desktop-PC-series/7779690/model/... SMbus needs the Intel chipset driver. Graphics needs the AMD R5-330 driver. I don't see the bluetooth driver listed on the support page, so see if this one works. This package contains the Broadcom Bluetooth driver for supported notebook models that are running a supported operating system. Broadcom Bluetooth Driver is required to enable Broadcom Bluetooth devices. File name: sp67447.exe Try manually installing the drivers if the auto install doesn't work. If the drivers don't extract to a folder like they do on notebook PC's, use a free file utility like 7-zip to extract the drivers from the exe file and browse to the folder that 7 zip creates.

Read other 2 answers
RELEVANCY SCORE 86

I need Drivers For Windows Server 2012 + EliteDesk 800  G1 TWR There is no drivers for Windows Server 2012  !!     

A:Windows Server 2012 + EliteDesk 800 G1 TWR Drivers

Hi: HP does not support the EliteDesk models for any Windows Server operating systems. The only suggestion I can offer would be to try the W8.1 drivers and see if they work.

Read other 1 answers
RELEVANCY SCORE 86

Would like to know if any one got successfully installed Windows server 2012 R2 drivers. I am trying to install wireless drivers for couple of days now and couldn't get them working. Any help would be really appreciated.Thank you

A:Wireless drivers - Windows Server 2012 R2

Hi: What model wireless card does your notebook have?

Read other 2 answers
RELEVANCY SCORE 86

Hello,

I see that there is a Windows 7 and a Windows 10 forum but my Windows Update problem is on a Windows 2012 Server Standard machine. Would it be OK to post in here, or is there a different sister forum I should post in?

Thank you

A:Window 2012 Server Standard Windows Updates Broken

Slipstick.com is the best resource, same as Microsoft's Technet site.

Very few on here play with Server 2012 or Server 2008.

Read other 0 answers
RELEVANCY SCORE 84.8

I am trying to install Windows Server 2012 R2 on my XPS 8900.  I have the following "unknown" devices that need drivers:
Bluetooth Radio
Network Adapter
Ethernet Adapter
PCI Simple Communications Controller
Dell's Windows 8.1 x64 drivers will not install.  Anybody know what the integrated (Ethernet) network controller is? Intel? What model? I may have to manually select the driver from the PROSet package.  How about driver candidates for the Bluetooth and PCI SCC?
Any other help would be greatly appreciated!
Thanks!

A:XPS 8900 Windows Server 2012 R2 network (all) drivers...

Update:
I was able to manually install the Ethernet Adapter from the Dell driver download package.  Still needing:
Bluetooth Radio
Network Adapter (wireless adapter?)
PCI Simple Communications Controller
for Windows Server 2012 R2.
Thanks

Read other 6 answers
RELEVANCY SCORE 84.8

I'm hoping someone can help me, as this is driving me mad. I have a brand new Microserver Gen8, and I'm trying to install MS Windows Server 2012 R2 Trial Edition on it. No matter what I do, whether using Intelligent Provisioning or manual installation, I get an error "Windows cannot find the Microsoft Software License Terms. Make sure the installation sources are valid amd restart the installation." I have updated the system firmware, and tried to install via a network share and a USB stick, with the same results. I can install the same OS in VirtualBox in about 30 minutes so I know it's not my installation ISO. This appears to be a common problem, and I'd really appreciate some help. MTIA, Andy 

A:Installing MS Server 2012 R2 Trial on Microserver Gen8?

Did you get this sorted - I have the same issue.  How do people fix this with an HP OEM install that doesnt provide a source disk?Its installed on the server disks as image, but then goes away when installed.Change the server disk array and you dont have any branded HP server 2012 source disksThen Provisioning doesnt work   

Read other 2 answers
RELEVANCY SCORE 84.8

Anyone run into this error?
Says concurrent installation I/O error.
I am following the instructions to apply a hot fix, but not sure if this is a Windows 10 ploy or a real error message.

Problem Event Name: SQL110MSI
P1: 11.0.2100.60
P2: 11.1.3128.0
P3: SqlSupport.msi
P4: 0x45C91AF3
P5: 997
P6: Install_SqlSupport
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Any suggestions?

Thanks in advance

Read other answers
RELEVANCY SCORE 84

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 83.6

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 83.6

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 81.2

Hello, I own my own IT consultation and management company and I have a few clients whom I will be upgrading their Servers to Server 2012. I thought it a good idea to have a place on this website to talk about and gives tips about Windows Server 2012. Please Fill out the poll so the Moderators can see what kind of interest the community has in this suggestion. Thanks!

A:When are we going to start a Server 2012 (Server 8) Forum?

Not a lot of interest unfortunately. Let me think about it and I will see what we can do.

Read other 2 answers
RELEVANCY SCORE 78.8

Im installing windows 7 on a usb i got a 150 gb hard drive this is the link to my specs :
HP Support document - HP Support Center

I am installing it on a fresh formatted usb stick PLEASE HELP then before this happened it said: Setup was unable to create a new system partition ! im really frustrated and I would appreciate an answer to my problem.

A:No device Drivers found when installing Win 7 on USB!!!!

Im not sure what you're trying to do but I will give it a shot..

If you are trying to actually install Windows 7 ON a USB, you can follow a tutorial such as this: 47 - How to install Windows Vista/7/SVR2K8 onto a USB drive (or any partition) - RMPrepUSB

If you are trying to install Windows 7 on a hard drive USING a USB, follow this guide to be able to install 7 from USB: Windows 7 USB/DVD Download Tool

If I am not understanding the question, please add additional information.

Read other 7 answers
RELEVANCY SCORE 78.8

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 78.8

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 78

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?
Pieter
 

Read other answers
RELEVANCY SCORE 78

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 78

Hello all, I am trying to install Windows 7 on the following desktop PC:

Intel Core i3 Processor i3-530
2048MB DDR3
500GB 3G Hard Drive
ATI Radeon HD 4350 Graphics
Supermulti Drive with LightScribe Technology

First, I will start by saying that when I turn on my PC, I receive this message on a black screen "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". When I press a key, nothing changes, i.e. still stuck on the same screen.

So, I decided to install Windows 7.

When I tried installing Windows 7, it would begin the installation process... I clicked "Install Now", then when given the options between "Upgrade" or 'Custom (Advanced)', I selected the Custom Advanced.

When asked 'Where you would like to install Windows?' (see screenshot #1.jpg), there was nothing shown in the box, i.e. there is no hard drive or partition for me to select where I can install Windows. So just to try, I clicked "Load Driver".

It prompted me to install a device driver. I clicked Browse and browsed through the existing drives. (see Screenshot #2.jpg)

Next, it showed me that 'No device drivers were found..." (see Screenshot #3.jpg)

I tried to google on how to find the drivers to install but to no avail.

Any ideas on how I should proceed from here? i.e. How to install the device drivers needed to continue the installation process etc.

Thanks!

A:No device drivers were found while installing Windows 7

  
Quote: Originally Posted by pommesorbet


Hello all, I am trying to install Windows 7 on the following desktop PC:

Intel Core i3 Processor i3-530
2048MB DDR3
500GB 3G Hard Drive
ATI Radeon HD 4350 Graphics
Supermulti Drive with LightScribe Technology

First, I will start by saying that when I turn on my PC, I receive this message on a black screen "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". When I press a key, nothing changes, i.e. still stuck on the same screen.

So, I decided to install Windows 7.

When I tried installing Windows 7, it would begin the installation process... I clicked "Install Now", then when given the options between "Upgrade" or 'Custom (Advanced)', I selected the Custom Advanced.

When asked 'Where you would like to install Windows?' (see screenshot #1.jpg), there was nothing shown in the box, i.e. there is no hard drive or partition for me to select where I can install Windows. So just to try, I clicked "Load Driver".

It prompted me to install a device driver. I clicked Browse and browsed through the existing drives. (see Screenshot #2.jpg)

Next, it showed me that 'No device drivers were found..." (see Screenshot #3.jpg)

I tried to google on how to find the drivers to install but to no avail.

Any ideas on how I should proceed from here? i.e. How to install the device drivers needed to con... Read more

Read other 9 answers
RELEVANCY SCORE 77.2

HI
KB3088195 and KB3102939 were removed after installing 2018-05 Security Monthly Quality Rollup for Windows Server 2012 for x64 based Systems (KB4103730). These two removed patches are not listed in WSUS as being superseded, nor in the list of superseded patches
by KB4103730. Was removal of these two patches a fluke or where they left out of the documentation?

Read other answers
RELEVANCY SCORE 76.4

I have a client with a web server running Windows 2000 Professional. They also have a server on the network running NT 4. They have been told that there is a device that will route requests to the NT server if the 2000 server is down that costs about $100. I have not heard of such an animal, and if anybody can shed some light on this I'd really appreciate it. The device should somehow, I suppose, automatically detect that the machine at IP address A is not responding, and route the web request to IP address B. Anybody?
Thanks,
Michael
 

Read other answers
RELEVANCY SCORE 76.4

This may well be a server issue. I just don't where to begin.

I have a Windows Server 2003 file and print server on my home network. And I have an HP 4050 laser printer on the network that is shared through the W2k3 server. Previously, all PCs and laptops on my network had been running Windows XP and they could install a network printer and get their driver from the server. My Windows 7 Pro machine cannot, probably because there is no Win7 driver on the server.

How do I place the driver on the server, so that I can install the network printer on the Win7 machine?

* I have just a workgroup environment set up on the home network, no domain authentication. I'm logged in an admin on the Windows 7 machine.

(I'm guessing that there may be other ways to go about this, like maybe installing the driver directly onto the Windows 7 machine and then pointing at the shared printer on the server, but I'd just as soon get the driver onto the server so that setup is easier for future Win7 machines.)

A:Installing Win7 printer drivers on W2k3 Server

  
Quote: Originally Posted by Carson Dyle


This may well be a server issue. I just don't where to begin.

I have a Windows Server 2003 file and print server on my home network. And I have an HP 4050 laser printer on the network that is shared through the W2k3 server. Previously, all PCs and laptops on my network had been running Windows XP and they could install a network printer and get their driver from the server. My Windows 7 Pro machine cannot, probably because there is no Win7 driver on the server.

How do I place the driver on the server, so that I can install the network printer on the Win7 machine?

* I have just a workgroup environment set up on the home network, no domain authentication. I'm logged in an admin on the Windows 7 machine.

(I'm guessing that there may be other ways to go about this, like maybe installing the driver directly onto the Windows 7 machine and then pointing at the shared printer on the server, but I'd just as soon get the driver onto the server so that setup is easier for future Win7 machines.)


It's unlikely that server 03 will have a printer driver for Windows 7, you will definitely want to install the driver on the Windows 7 machine.

The problem is that with old printers it may be difficult to obtain Windows 7 drivers but that is your best bet.

Read other 4 answers
RELEVANCY SCORE 76.4

First of all, this is my first post on this forum. (Hurray!) Only because most computer related issues I can fix myself with the help of the internet. However after trying to fix this for about 2 days now this is my last resort. Before you ask yes I have HUNTED through the internet trying to fix the issue, but most of the fixes are only specific to their computer so I've decided making a new thread would be the only other option.

So after finally getting sick of Windows Vista, I wanted to upgrade so I bought and downloaded the Windows 7 x32 .iso file and burned it at the lowest speed possible twice; once using ImgBurn, and once using InfraRecorder, after recieving the error the first time. From there I shut down my computer and rebooted it, and booted from the Windows 7 install disk. The installer then opens up and everything till I get to the language screen, where I pick my language (English US or just English, from memory.) Time and date location (English New Zealand) and default for the other (cannot remember that). From there it takes me to the next screen, where a pop up saying 'No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok.' pops up with three options, Ok, Cancel and Browse. From there I pretty much have to find my driver updates to continue, but it does not specify what driver I need at all and I have no idea what to do.

So far I have tried all of the solutions provided in this post, except for th... Read more

A:No device drivers were found error, installing Windows 7 from Vista

Hello Sock, and a big welcome to you to Seven Forums!

Try this tutorial out for your particular situation: Clean Install with a Upgrade Windows 7 Version

Also, if you have any other installation questions you need tutorials for, you might use this google search under 'standard search' for this forum to look it up, as we have a lot of tutorials.

And the drivers are found simply through the part's or Computer's manufacturer's website, in your case Asus: ASUSTeK Computer Inc. -Support- Drivers and Download X58LE

You can look through this to speed up your computer: Optimize Windows 7

I can help you more specifically with certain drivers if you update your system specs; a how-to can be found in my signature below V

Read other 9 answers
RELEVANCY SCORE 76.4

I recently bought an Acer Aspire 4750G with no Windows pre-installed (i.e DOS).

I downloaded Windows 7 x64 Professional Edition .iso from the official MSDNAA website. I used Windows 7 USB/DVD Download Tool (run on Windows XP SP3) to create a bootable USB flashdisk (Sandisk Cruzer Blade 8.0GB). Note that the file format of the flashdisk is turned to NTFS.

Next, i inserted the flashdisk into the USB3.0 port of my 4750G, when into BIOS and changed the boot priority to USB HDD - Sandisk Cruzer Blade.
As usual, I saved the changes, exited the BIOS and reboot. Also note that the initial mode is AHCI.

Booting from flashdisk is successful. I was able to enter the setup. The first screen prompts to select country and keyboard. The next screen shows the button "Install Now".
When I clicked this button, the setup does not lead me to the License Agreement screen. Instead, it displays the following message:

A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now
There is a Browse and Rescan button at the bottom.

I had previously downloaded every driver for my Acer Aspire 4750G, hence i extracted those in .zip and copied them into the same flashdisk and restarted the setup again.
When the No Device Driver screen appeared, I clicked on the "Browse" button and tried to navigate to the driver folders inside the flashdisk. But I cannot find them, because the directory of the bootable US... Read more

A:Trouble installing Win 7 x64 on Aspire 4750G - No Device Drivers Found

How about burning a DVD of the download iso and try the install from there?

Read other 9 answers
RELEVANCY SCORE 76

Hi, I am going to install windows 2008 server on the IBM server x3650 7979 and couldn't get the supportive RAID Serv as the I am currently got the IBM ServerGuide Setup and Installation CD version 7.4.17 for adaptec RAID controller 8K but it does not have windows 2008 server option. Do assist me in this regard. thanks
 

Read other answers
RELEVANCY SCORE 75.6

I bouoght a dual quad Xeon workstation on eBay that I want to use for 3d graphics rendering. Price was right but if came with no OS. It has a Vista key label but I want to install Windows 7 Pro 64 on this machine.

I found a number of forums where people talk about successfully using W7 and on the Dell site it says the machine is compatible with basic W7 functions so it should work. Most of what they say involves issues with RAID drivers. I really have no need for RAID and have just one drive in the box. (It is currently running Linux just fine)

Problem is cannot get it to install because it can not find "suitable drivers". I have all the drivers available from Dell for Vista. There are no Win7 drivers for this machine so have to use Vista 64 drivers.

How can I get past that driver barrier and install Windows 7 and install the Vista drivers? Is there a way I can load it using another machine as a source? I have the same OS on a couple other machines although the other is an i7 quad. The video cards are the exact same model.

What if I got a Vista install disk and use the key on the box then upgrade to 7?

Shame to have a really fast linux door stop! :scratch:

Dell T5400 / Dual Quad Xeon / 32 GB RAM / Nvidea 730 GPU

/

A:Help installing Win7 on Dell T5400 server with Vista drivers

Go onto dell site and see what drivers are available for it if there are win7 drivers you can just install 7 is there a tag number on it if so enter that to get all drivers

Read other 1 answers
RELEVANCY SCORE 75.6

So I ran into another bigger trouble again after taking so much time to make this LENOVO YOGA 300 mini laptop Boot from my USB. I was very happy when I succeeded in making the LENOVO YOGA 300 Boot from my USB drive BUT got disappointed when it stock at A REQUIRED CD/DVD DRIVE DEVICE DRIVER IS MISSING Thought maybe as compare to what I normally do to most HP "remove and plug it back again or changing the port" may help me but did all of  those stuffs but didn't help.When back and bought a new USB flash made it bootable tested and trusted, on other PCs even some LENOVO. But was surprise when inserted it into this LENOVO YOGA 300 it started well and stock at the same place where it Will shows A REQUIRED CD/DVD DRIVE DEVICE DRIVER IS MISSING . I don't know what else to do.Please any help on this I'll be very grateful

A:Found “A required CD/DVD drive device driver is missing” when installing Window 7 on LENOVO YOGA 300

Make sure you are plugging into a USB 2.0 port, and not a USB 3.0 port.

Read other 1 answers
RELEVANCY SCORE 75.6

I apologize if this is the wrong forum to post this and if anyone can direct me to the proper forum if any, but here goes.
I found this site in some searching and I searched the forums. So I thought maybe I could use your expertise for some help. Heres the problem I am having. I am trying to fix some issues with my Media server through my LG smart tv. I use verizon fios and my LG tv is able to go and connect to the internet access youtube, and netflix etc etc just fine. I have had fios for 3 months. For the first 2 months it worked fine. Under the Input on the LG tv I would go to DLNA network and there it will show all the available choices, the first one was always Verizon Fios STB (set top box), and then it would show up with My PCs name, and then My Pc's name and (insert name of media server) so usually since i use tversity it would show up
Verizon Fios STB
James C-PC
James C-PC tversity media server
I could select the tversity one and access my library and stream through my TV just fine. But 3 weeks ago It stopped working and it would only show up with Verizon Fios STB. Now I have been trying to fix this issue for 3 weeks and 2 days. But yesterday after 23 days I went on verizon Fios livechat support and asked them to reset the username and password of my fios router as I was unable to login into it. When the representative took control of my screen and he took me to the router login i reset my password and logged into the router. I didnt make any changes and if i ... Read more

A:DLNA server not found For Media Server. Any help please??

Read other 7 answers
RELEVANCY SCORE 75.6

ordered a new graphics card installed it worked fine for about 6 mins then froze and squares came on the screen so i thought i would reformat my ssd i did i went to install windows 10 using the retail disk and it came up saying no signed drivers were found windows 10 ive tried then making a usb boot of windows 10 that also didnt work. thanks any help would be great.

Read other answers
RELEVANCY SCORE 75.2

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers
RELEVANCY SCORE 75.2

Sais here, Install more than one operating system (multiboot) - Windows Help

I should install the older operating system first, windows 7, to run a duel boot with windows 2012 server.

But I am already running 2012 server and would like to just install windows 7 to it. Surely it will work.

I was going to shrink my c volume to create a new partition within my c hard drive and install windows 7 to that.

Or I could just install it to another drive, which I'd prefer not to do. Any advice regarding possibility of doing this?

I presume this is similar to installing windows 8 first and then wanting to install windows 7 afterwards as a duel boot.

Please advise further, cheers

A:Installing Windows 7 after Windows 2012 Server Installatio

It used to be that way with XP, but you`re fine to install 7 after Server 2012.

Personally, I would get another drive, hard drives are cheap and 7 deserves its own.

Read other 3 answers
RELEVANCY SCORE 74.8

I have seen some of the threads listed but none have been able to get my nephew's laptop working again. It is a Toshiba Satellite Pro L450D. His hard drive got corrupted and we've lost everything. I am now trying to load windows 7 64 bit on to a brand new hard drive. I keep getting 'No Drives were found. Click load Driver to provide a mass storage driver for installation'.
I then press the "Load Driver" and get up 'To install the Device driver needed to access your hard drive, insert the installation media containing the driver files and then click OK.'
When I browse to find the drivers I've downloaded from Toshiba direct on my flash drive, I get "No signed drivers were found. Make sure that the installation media contains the correct drivers and then click OK'
This is as far as I can go because I do not know how or where to get "signed drivers".
If someone is able to help a silver surfer to complete the installation it would be much appreciated. Thank you

A:How can I get my device drivers signed for use in Windows 7 64 bit?

Hi Welcome to Sven Forums .. Boot in to the BIOS to check if your Drive has been detected .. If not check all your cables .. Read the Tutorial below to get the perfect Insulation ...
Clean Install Windows 7

Read other 2 answers
RELEVANCY SCORE 74

I am trying to replace the auto generated self-signed (Issued to DM, issued by DM) certificates for the HDPM Server and Master Repository.  I am NOT refereeing to FTPS, the HPDM Embedded HTTPS Server, or the Thin Client Agent certs.   I have already setup certs from our own domain internal CA for FTPS in IIS and the Apache Embedded HTTPS server.  These are working fine and Repository tests pass for both protocols.  I have also issues to the Thin Clients from our internal CA just fine. I'm interested in the actual HPDM Server cert and Master repository cert. These are self-generated when the two services start up.  They use a very weak MD5 hash and RSA 1024 key.  I cannot find any documentation around this except for troubleshooting in which you can delete these certs restart the services and they will be regenerated.   Here are the certs\key paths%HPDM Install Path%\MasterRepositoryController\Controller.crt (Repository Cert)%HPDM Install Path%\MasterRepositoryController\Controller.key (Repository Key)%HPDM Install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)%HPDM Install Path%\Server\Bin\hpdmskey.keystore (Both HPDM Server and Repository Certs and Keys)(Not sure the format it is in.  It's not PEM and ok P12 as far as I can tell) There is also %HPDM Install Path%\Server\bin\hpdmcert.key.  Not sure what this is.  Think it?s the HPDM Server key but deleting it does nothing and it is ne... Read more

Read other answers
RELEVANCY SCORE 74

Hello, I've read a few of the other posts but haven't been able to get it to work on mine yet. I'm getting the "no signed drivers were found" error when trying to install windows 7 64 bit on my new build. I don't have an old one to format the hard drive and partition it on. So my question is can I build a partition outside of the install or inside of the install? When I switch to ACHI(AHCI) which every one it is, and I go into advanced installation it gives me the option for new partition but there are 0 MB available to do this with. I've put my comp specs into my profile. Thanks in advance for your help.

P.S. When my old desktop crashed I had a working laptop so I has been years since I've had a 2nd desktop to work with.

A:No signed drivers were found on fresh install new build.

Put the Dvd in the computer when you get to the screen where it asks you where you want to install Windows . Hold down Shift and press F10 . You will then have a command prompt Window and type in these commands



   Note
Press < ENTER > after every command

Type DISKPART
Type LIST DISK
Type SELECT DISK 0

Type CLEAN


Type CREATE PRIMARY PARTITION
Type SELECT PARTITION 1
Type ACTIVE
Type FORMAT FS=NTFS LABEL="Windows 7" QUICK

Type ASSIGN LETTER=C

Type EXIT

Type EXIT

Then back in the Where to install Windows click on Refresh and you should see

Disk 0 Partition 1: Windows 7 C:

Highlight that and click on next .



   Note
If you don't want to use the entire hard drive you could type in CREATE PARTITION PRIMARY SIZE=51200 that will create a 50GB partition

Read other 9 answers
RELEVANCY SCORE 74

Hello, I've read a few of the other posts but haven't been able to get it to work on mine yet. I'm getting the "no signed drivers were found" error when trying to install windows 7 64 bit on my new build. I don't have an old one to format the hard drive and partition it on. So my question is can I build a partition outside of the install or inside of the install? When I switch to ACHI(AHCI) which every one it is, and I go into advanced installation it gives me the option for new partition but there are 0 MB available to do this with. I've put my comp specs into my profile. Thanks in advance for your help.

P.S. When my old desktop crashed I had a working laptop so I has been years since I've had a 2nd desktop to work with.

A:No signed drivers were found on fresh install new build.

Put the Dvd in the computer when you get to the screen where it asks you where you want to install Windows . Hold down Shift and press F10 . You will then have a command prompt Window and type in these commands



   Note
Press < ENTER > after every command

Type DISKPART
Type LIST DISK
Type SELECT DISK 0

Type CLEAN


Type CREATE PRIMARY PARTITION
Type SELECT PARTITION 1
Type ACTIVE
Type FORMAT FS=NTFS LABEL="Windows 7" QUICK

Type ASSIGN LETTER=C

Type EXIT

Type EXIT

Then back in the Where to install Windows click on Refresh and you should see

Disk 0 Partition 1: Windows 7 C:

Highlight that and click on next .



   Note
If you don't want to use the entire hard drive you could type in CREATE PARTITION PRIMARY SIZE=51200 that will create a 50GB partition

Read other 9 answers
RELEVANCY SCORE 73.6

Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.

As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.

This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.

There is a Simple way around this Block.

Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter")
Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.

Hope it helped. (if so, +Rep is one of the best ways to thank)

A:Guide to Installing Un-Signed Drivers in Win 7 x64

  
Quote: Originally Posted by Benjamin


Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.

As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.

This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.

There is a Simple way around this Block.

Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter")
Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.

Hope it helped. (if so, +Rep is one of the best ways to thank)


Hi Benjamin,

We have a tutorial section for guides like this if you would like this thread moved there?

You can also install unsigned drivers by either self-signing the certificate or installing the one it came with, if it contained any digital certificate


Steven

Read other 9 answers
RELEVANCY SCORE 72.4

H5321GW didnt have proper signed driver for Windows Server 2016. Why? On windows 10 the driver is working (Version 8.2.5.0 from 6/11/2015), i saved and pushed into the Windows Deployment System, but after under Windows Server 2016 didnt work, because of signature missing. When will be available updated driver for the mobile broadband?? .... And Bluetooth connect to PAN also dont have. (BTH\MS_BTHPAN)


























H5321GW.JPG ?73 KB

Read other answers