Over 1 million tech questions and answers.

install cpu cooler

Q: install cpu cooler

I have the B450 AORUS M REV 1.0 motherboard and ther AMD RYZEN 5 2600 w/ cooler fan. The fan had 4 screws which appear to screw into the place where there are plastic ? on each side of the CPU. Can someone tell me if I am to remove the plastic ? side pieces and screw the fan into the holes which will be vacated by removing the plastic ?.
Many thanks for all who can help.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: install cpu cooler

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 61.2

Hi, i am saikat from kolkata ,india.today I install cooler master liquid lite 120 top of my cpu. then switch on my computer computer run fine but CPU temparataur increase from before. Before I used intel cpu fan that time temperature was 40 to 46 degree c with 4 to 5 % cpu work. But when I install liquid cooler ,temperature increase .Now temperature 55 to 63 degree c when cpu work only 5 to 6 %. So please help me how can solve this problems.
My processor i5 (3570)
Motherboard intel or DB75EN
Also have graphic card.
Please help ,what is actual problem oh I use same thermal pest for both.
 

Read other answers
RELEVANCY SCORE 60.4

Hi, i am saikat from kolkata ,india.today I install cooler master liquid lite 120 top of my cpu. then switch on my computer computer run fine but CPU temparataur increase from before. Before I used intel cpu fan that time temperature was 40 to 46 degree c with 4 to 5 % cpu work. But when I install liquid cooler ,temperature increase .Now temperature 55 to 63 degree c when cpu work only 5 to 6 %. So please help me how can solve this problems.
My processor i5 (3570)
Motherboard intel or DB75EN
Also have graphic card.
Please help ,what is actual problem oh I use same thermal pest for both.
 

Read other answers
RELEVANCY SCORE 48

Ok so I installed a new Asus v60 cpu cooler on my system today, and after I installed the cooler my internet and audio aren't working. And also barely any of my service can be started. Is there something I could've done wrong? The cooler seems to be installed fine.

A:New Asus v60 cpu cooler install help

  
Quote: Originally Posted by Anpippin


Is there something I could've done wrong?


Quite possibly. Did you 'knock or clunk' against anything during installation?


How did you install the cooler? ie remove the mobo from the case or attach the backplate through the cutout (if the case has one)

If removed from the case, what surface did you put the mobo on? ie Anything that could cause static etc

How tight did you attach the cooler?

From the symptoms, worst case scenario it sounds like you may have damaged/shorted the board.

Hopeful case scenario, the cooler isn't actually installed correctly and just needs to be re-seated and any aberrations are temporary with no permanent damage.



Does the BIOS have any temp monitoring? If so what are the temps like?

Read other 9 answers
RELEVANCY SCORE 47.6

Hi, anyone knows wether a 120 MM CPU Cooler will phyiscally fit in a M92p Tower case? The cooler is 158 mm high in total. I think the Thinkcentre case is 175 MM wide. But You also have to consider that there is a Motherboard and CPU inbetween. WIll that fit or do I have to go for a smaller 92MM Cooler? Anyone tried this before?

Read other answers
RELEVANCY SCORE 46.8

Hello all, new to this forum. I bought a Cooler Master chipset cooler for my Asus P4P800-E Deluxe. I was checking my GPU fan when I touched the cooler and it was hot, I mean HOOOTTT, like cant touch it for more than a second hot.

The fan is spinning the 5K revs it runs in but its super hot anyway. I gave my stock cooler away and this is what I have. The MB temperature is normal, 37c and cpu 32c fanless at idle. I dont know where that MB sensor is located but the chipset must be over 40c at least.

Whats the best chipset cooler out there. My MB has an Intel 845 chipset. (i need an upgrade!)

My Antec P180 (provides great ventilation with 4 120mm fans) case is sitting standing up like its meant to be and I was reading in another forum that some heatpipes dont like to be sideways, could this be the case?
 

A:Problem with Cooler Master chipset cooler RUNNING HOT!

chipsets have a higher heat tolerence than CPUs, 40c is a safe operating temp. also, temp sensors are not accurate, so you can't really go by the reading from it anyways. it's not unusual for software based sensor to be as much as 10c off the actual temp.

the cooler you bought should work fine. did you thoroughly clean the chipset and heatsink with isopropyl alcohol and then apply new thermal compound before mounting the cooler?
 

Read other 3 answers
RELEVANCY SCORE 46.8

Hi guys,

Does anyone know what CPU cooler this is? It is for the silverstone SUG SG07

link to youtube is: http://www.youtube.com/watch?v=vsg2sKoOV50&feature=player_embedded

At 1:20
 

A:Silverstone SUG SG07 Mini ITX CPU COOLER? Identify this cooler?

Read other 7 answers
RELEVANCY SCORE 46.8

I upgraded my GPU recently and noticed that my CPU fan was making more noise than I remembered - sort of a droning noise.  I checked my CPU temps and discovered that, at idle, the CPU was hitting 38-42C.
I decided to upgrade my cooling.  The main limitation (besides the fact that Dell has a non-standard CPU backplate setup) is the somewhat narrow case on the XPS 8900 doesn't allow installation of most of the inexpensive high-performance coolers because they are too tall by 1/2" - 3/4".  Then I found the Cyrorig H7, which has three heat pipes, a huge heatsink, and 120mm fan all in a package that is "only" 145mm high - just short enough to fit in the case.  I installed it yesterday and it works GREAT.  Very happy with it, initially at least.
I also swapped out the stock Sunon case fan for a Cooler Master Blade Master 92mm fan, which is quieter but similar CFM specs.
Overall the computer is now quieter at 100% load than it was at idle before.  And my CPU temps have dropped by 15 degrees C.  Great upgrade.  I made a video on how I did it here:
...and here are a couple of pics:

A:XPS 8900 CPU cooler upgrade - much quieter and cooler operation

Nice !

Read other 1 answers
RELEVANCY SCORE 46

Hello,

Do you guys think that Cooler Master V8 CPU cooler will fit in a regular full tower case. Its not a branded/famous case, just a normal full tower with handle on top.

Thanks for your answers.
 

A:Solved: Case for Cooler Master V8 CPU Cooler

Read other 12 answers
RELEVANCY SCORE 46

Alright, so recently my stock cooler for my CPU has been getting really annoying. It seems to get really loud during gaming, with my CPU temps averaging around 43c.

So I decided to grab a new CPU cooler. Ive had my eyes on the
COOLER MASTER V8


But now after a little of reading up on the cooler, I'm a little concern about size and effectiveness. Here's my case if anyone knows if it will definitely fit.
http://www.newegg.com/Product/Product.aspx?Item=N82E16811147047&Tpk=Rosewill armor gaming case

Also,id like to know if there are any other good CPU coolers out their along the same price range, that performs better.

-Thanks In advance
 

A:New CPU cooler to replace AMD 965BE stock cooler

The V8 is still a very good cooler, and was top dog for its time. if you want the top performers now , you are going to pay another $30 for them.

http://www.newegg.com/Product/Produ...00 50001444&IsNodeId=1&name=Thermalright, Inc.

http://www.newegg.com/Product/Product.aspx?Item=N82E16835608018

http://www.frozencpu.com/products/1...Cooler_Sockets_775_1156_1366_AM2_AM2_AM3.html

http://www.frozencpu.com/products/1...Cooler_Sockets_775_1156_1366_AM2_AM2_AM3.html

I have the Silver Arrow (3 fan) cooling an AMD Phenom II x6 1100T @ 4.3Ghz and It's stellar.

Make sure you know the measurements of your case if you are getting a high end cooler.
 

Read other 2 answers
RELEVANCY SCORE 44.4

I just got the Cooler Master Hyper 212 Plus Cooler today, easily installed and really good. Well better than stock cooler.

Hyper 212 Plus - Cooler Master - Leading Provider of Computer Case | Cooler | Power Supply

Cooler Master Hyper 212 plus review

The 1 fan which is mounted is intake.

If i were to install another fan to make it dual fan, would both be intake or would one be exhaust and intake etc. As in going with the push pull flow?????

A:Cooler Master Hyper 212 Plus Cooler

  
Quote: Originally Posted by rmw020


I just got the Cooler Master Hyper 212 Plus Cooler today, easily installed and really good. Well better than stock cooler.

Hyper 212 Plus - Cooler Master - Leading Provider of Computer Case | Cooler | Power Supply

Cooler Master Hyper 212 plus review

The 1 fan which is mounted is intake.

If i were to install another fan to make it dual fan, would both be intake or would one be exhaust and intake etc. As in going with the push pull flow?????


I have the 212+ as well. You'd want one push and 1 pull. Also, make sure the 2nd fan moves the same amount of air as the 1st, or you'll create a bottleneck of sorts. But with 2 fans that have equal airflow, you will notice a drop in temps. But there will be more noise, unless you change both fans to a quiet fan like Noctua's. A Guy

Read other 9 answers
RELEVANCY SCORE 37.2

Hey guys,

I've got a brand new core 2 duo stock cooler from my old PC, and it seems much better than the stock cooler I got on my i5: cooper base, twice as much heat sink and pretty much the same fan. I was wondering if it would work better on the i5 than the tiny little I think I got along with it. Place your opinions, I'll test it this afternoon and post the results.
 

A:Solved: i5 stock cooler vs. 775 stock cooler

Eh, how embarrassing, the 775 cooler doesn't fit on the 1156 socket.
 

Read other 1 answers
RELEVANCY SCORE 32.8

So I'm doing another big rig build. I have my Intel i7 processor on the board and a honkin' big cooling fan and fins to help it run cool. But now my memory won't fit.

My plan now is to use the cooling fan and heat sink that came with the processor. It's considerably smaller but it was included with the processor. I usually go big with the CPU cooling but it seems to me that if Intel put the fan in the package, they are satisfied that it will do the job.

The case has lots of space and HUGE fans itself so, I'll go this route until I find a suitable replacement. Or maybe this can work indefinitely. Any thoughts?
 

A:CPU cooler big enough?

As long as you do not overclock the processor, the stock intel fan does fine.

With some of the large hsf, you have to do some engineering to get it to fit. I had to grid some material off of the bottom of a coolermaster 212 to get the memory to fit. Another option is to use low profile memory like this;
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148660
 

Read other 2 answers
RELEVANCY SCORE 32.8

ok, i was thinking about getting a new cpu cooler cause the 1 on my cpu atm is loud and annoying, atm i just have the standard fan and heatsink that came with my cpu (amd athlon 3200+) i was looking around and i found some that are cheap cause i dont really want to be spending that much, maybe $20 - $50 australian, i dunno if its even gonna be worth changing if im only going to be payin that much. so here are my links if some1 could tell me the best out of these and any other info/advice would be good,

thanks

http://www.coolpc.com.au/catalog/product_info.php?products_id=1339

http://www.megapc.com.au/product_details_and_order.php?select_part_indx=3820

http://www.nintek.com.au/x/scripts/prodView.asp?idproduct=6459

http://www.nintek.com.au/x/scripts/prodView.asp?idproduct=6443

http://www.nintek.com.au/x/scripts/prodView.asp?idproduct=6448

http://www.coolpc.com.au/catalog/product_info.php?products_id=1363

http://www.scorptec.com.au/product/11519

thanks again
 

A:new cpu cooler

Any one but the third one as its for a lga775 socket!!!!
 

Read other 15 answers
RELEVANCY SCORE 32.8

I plan on getting a new computer soon, and will buy the AMD 2500+ Processor. What I was wondering, is if i plan on overclocking it to 3200+, will the stock cooling be good enough, or should I get a different one. My case is going to have 6 case fans, and it's huge, so it will be well ventilated. I was thinking about this one, http://www.xpcgear.com/ttsilenta1889.html. Is that even better, and is it even necessary. Or if you have any other suggestions, please let me know. And water cooling isn't really an option, it's too spendy for me, plus I doubt it's necessary.
 

A:CPU Cooler

You will definitely need a new fan if you are planning on going up to a 3200+, and the fan you linked to seems very good to me, and it suprisingly shouldn't be particularly noisy either at only 21dB.

Remeber to get some good quality thermal paste, such as artic silver.
 

Read other 6 answers
RELEVANCY SCORE 32.8

hey there,

im thinking of buying a new CPU cooler, as my CPU runs quite hot on full load (around 60 degrees C) and according to AMD max. is 62.

what would be a good one, keeping in mind i'd like to try to OC in the summer. my computer is on the top floor which is always very hot in the summers, that'd be a thing to keep in mind to when choosing

i've read about the scyte mugen 2, but im not sure if my case is big enough.

and how about mounting it? how hard is it? howmuch thermal paste do i need to put on the CPU? how do i clean off the old thermal paste?

thanks in advance

DD

A:new CPU cooler

  
Quote: Originally Posted by dutchdarky


hey there,

im thinking of buying a new CPU cooler, as my CPU runs quite hot on full load (around 60 degrees C) and according to AMD max. is 62.

what would be a good one, keeping in mind i'd like to try to OC in the summer. my computer is on the top floor which is always very hot in the summers, that'd be a thing to keep in mind to when choosing

i've read about the scyte mugen 2, but im not sure if my case is big enough.

and how about mounting it? how hard is it? howmuch thermal paste do i need to put on the CPU? how do i clean off the old thermal paste?

thanks in advance

DD



The default inexpensive choice is the Cooler Master Hyper 212, which sells for around 30 bucks. Well above average and cheaper than most. Large, but not enormous.

You clean off old thermal paste with isopropyl alcohol and clean cotton rags or q tips.

You don't need much new thermal paste. The standard paste recommendation is Arctic Silver 5. Apply it according to the instructions for your processor at arcticsilver.com. You don't need much.

I know nothing about mounting on AMD, but mounting on Intel is a cruel joke designed by the Marquis de Sade and Alfred E. Newman (their only joint venture).

Read other 8 answers
RELEVANCY SCORE 32.8

hi all. i have a barebone system and it's had some minor problems with the heat. i'm not 100% confident that it's the problem with the heat, but people tell me to replace my stock cooler anyway, so i'm hunting for a nice CPU cooling system for a P4 2.8GHz Northwood core CPU. if anyone has any good suggestions, feel free to shoot! in case it matters at all, my system is a MSI Mega 865 barebone system. thanks in advance everyone

postscript: thanks for the help brite!
 

A:Best cooler for P4 CPU?

I love my Thermaltake 7+ Xaser. But not the cheap goop that came with it.
 

Read other 1 answers
RELEVANCY SCORE 32.8

Hey all,

I have a Noctura CPU cooler installed at the moment. I 'd like to use this cooler again on another CPU, so I have to take it off and remount on new.

Question is what do I do with the old cement from the original installation? Do I need to remove it and how would you do that before remounting on new CPU?

Thanks

A:Old cooler on new CPU

i would definitely remove the old stuff - i've used a cotton bud dipped in alcohol successfully in the past.

let it dry well, or give it a good rub with something sensible.

apply a thin layer of fresh thermal paste, et voil?...

Read other 9 answers
RELEVANCY SCORE 32.8

what is the best socket 478 cpu cooler? i need help deciding which one to upgrade to.
 

A:best cpu cooler??

Read other 10 answers
RELEVANCY SCORE 32.8

Hi all!

I am going to buy a new computer, and I basically have everything now. Except for my CPU cooler. I will be using it on a AMD Phenom II X6 1090T, on a Asus Crosshair IV Formula motherboard. I am not planning to be pushing extreme limits, around 4GHz I guess. My budget is about $60-$70 or 40-50 euros.

I heard that the Prolimatech Megahelm was really good with a Push-Pull confguration. So that would mean that I should get 2 seperate fans. Does anyone know some good ones? I'd prefer them to be under 10 dollars or 7 euros. I just found these two: http://www.newegg.com/Product/Produ...rue&Keywords=(keywords)&Page=2#scrollFullInfo and http://www.newegg.com/Product/Product.aspx?Item=N82E16835200028. Both have really good reviews, but one has a sleeve bearing type and one a 2 ball bearing type. Is there a big difference? Are these good fans?
 

A:Need help on CPU cooler

If those are the options,go with the ball bearings. Stay away from the sleeve bearings, especially on the HS cooling your CPU. They have a decidedly shorter life span, and in some cases can 'go out' rather quickly.
 

Read other 2 answers
RELEVANCY SCORE 32.8

I have installed a Gigabyte GH-PDU22-SC CPU HSF unit on my computer. This is killer. In the 9 hours since I have had this installed, I have noticed my CPU temp drop by 12 degrees C. From 44C to 32C and this is before the arctic silver has had a chance to cure. I am looking forward to seeing if the 300 hour curing time makes it drop even lower. And the Fan at full speed of 2400 rpm is absolutely silent. It is a big unit so mounting in some cases and on some boards might be difficult. But I am impressed so far. This was not my first choice in coolers but I didnt have the funds for a Thermaltake Big Typhoon.
 

Read other answers
RELEVANCY SCORE 32.8

Hey guys I'm looking to replace the heat sink / fan on my Geforce 9600 GSO. At full load it is borderline 80 degrees C. I was looking at some coolers on Newegg and some of these ones make me wonder if it will work.

This one from zalman
http://www.zalman.com/ENG/product/Product_Read.asp?idx=276
on their site says it fits a 9800gt, gtx, 9500gt and such. But nothing for a 9600 GSO listed. I wonder if the bolt patterns are the same as the 9800s and 9500s since they are very similar in design. Any GPU Gurus out there that can give a little more insight. I tried emailing Zalman but that was a complete flop as expected.
 

A:Will this VGA cooler fit?

http://www.overclockers.co.uk/showproduct.php?prodid=HS-057-AK&groupid=701&catid=57&subcat=787
 

Read other 1 answers
RELEVANCY SCORE 32.8

Hi all whent to frys had a v6 gt cooler instaled got the comp home pluged it up and it was idl at 41 c same as stock fan , did a stress test temps shot upto 80c fast ,called frys they say it just need to breakin so I let it idl for 15min at 41c .did the test agen same thing 80c stoped the test fast so i took the v6 gt off and saw they did not take off the clear sticker , so i was pissed off so i cleand it off and put as5 on it. my ? is now it idls around 38 to 40c and stress test it hits 55c should it be better or is that good haf912 2x200mm fans and 2x140mm fans in case i7 950

A:V6 gt cooler

You're good to go with those temps.

Read other 1 answers
RELEVANCY SCORE 32.8

Which cpu cooler would you recommend, parameters are quality, reliability and quiet.
I have an Asus P5W DH Del with an E6400 Core 2 Duo. It has the stock Intel cooler.
I am not o/c at the moment (if I did it would be minimal).
The cpu runs cool.
However, this stock cooler is more noisy than I would like so I am considering this upgrade.
Any advice/recommendations would be appreciated.
Thanks
 

A:Which CPU cooler to use??

If you just want it to be quieter, I would enable the smart fan feature; check your mb manual for how to enable / disable this feature.

FWIW I use an asus VR cooler on a Pentium D 940 and it works very well. Quite as well.
 

Read other 1 answers
RELEVANCY SCORE 32.8

I have an old Sunbeam Core Contact 92mm CPU cooler that fits these sockets; Socket 754 / 939 / 940 / AM2 / AM2+ / LGA 775 I have a friend that has a Gigabyte mobo (GA-78LMT-USB3 6.0) that supports sockets AM3/AM3+ and I want to give him this CPU cooler. Will this CPU cooler work even though the specs only list's the AM2/AM2+ sockets? I don't have the mobo in front of me or I sure would attempt it....just wondering if anybody knows or has tried this?

Read other answers
RELEVANCY SCORE 32.8

Hey lately i have currently been looking for a new cpu cooler considering that i still have the default stock cooler that came with the cpu and/or case...

Which isn't really doing its job too well not cooling and extremely loud (doesn't help that the computer is in the hottest room thats like a oven through out the day). I would like to aim for something between $30-60$ excluding postage costs (preferably something cheaper thats half decent).

I was wondering if you could recommend a good cpu cooler for me? I'll list all the main pieces of hardware in my case so you can have more information in as what i would be able to use.
what i have:
Motherboard: Gigabyte GA-MA790XT-UD4P
PSU: 620W HX Corsair
Graphics Card: ATI Radeon HD4870 x1
CPU: AMD Phenom II x 4 955
Fans: 1 120mm bottom fan, 2x 120mm top exhaust, 1x120 rear exhaust
Case: CM 690

Thats the main components of my computer and also i live in Australia so i dont know if all the products that might be good for me will be available.

PS: To save you having to read about it the motherboard is AM3 socket.

well thanks for help in advance.
 

A:New CPU Cooler

Read other 9 answers
RELEVANCY SCORE 32.8

My GPU is GAINWARD GeForce 9500 GT, it doesnt have a cooler, just heatsink. Temp is about 50C when idle, and 55-60C in games. So i though that it might be a good idea to see if i can add a cooler on this gpu beacuse i want to overclock it.
 

A:GPU Cooler

you can get a 80mm fan to put on the heatsink with zip ties, this would be the cheapest. or you could get this ZALMAN VF900 ? CU 2 Ball VGA Cooler
 

Read other 2 answers
RELEVANCY SCORE 32.8

hi
i want to replace the stock cooler on my amd quad core cpu but every one i keep looking at means me taking the mother board out to put a plate under the board

i would like one where i take mine of and put another one straight on but keep the orignal clip design on the board any ideas

thank you

A:cpu cooler

If AM2 coolers are compatible with AM2+ socket (think they are), then look at Zalman 9500 or 9700 coolers (9700 would be better for a quad core Phenom). They just use the retention clip design without having to put a backing plate on.

I used the 9500 cooler on my Athlon x2 and it kept it nice and cool, and using the 9700 on my E8200 atm, and it's running great.

I have to say, the best thing about AM2 sockets is the very easy installation of coolers on it.

Read other 26 answers
RELEVANCY SCORE 32.8

Just a quick question:
Does the Scythe Mini Ninja Heatpipe CPU cooler work with Socket AM3 processors? It only states AM2 in the description but I've heard somewhere it works with socket AM3 processors, it would be going on an AMD phenom II x2 3.2ghz black edition processor. I've got a small case so I need this coolers size, unless you can suggest any other small cpu coolers (preferably under 130mm in height) for AM3 sockets.

Many thanks, Alex
 

A:CPU Cooler

Read other 7 answers
RELEVANCY SCORE 32.8

Hi all,

I have my computer specs filled in for reference. What I would like to do is replace the stock Intel CPU cooler that came installed with my i5 2500K. I monitor my CPU temps with Core Temp running on the taskbar and lately I have been noticing that my CPU temps have been running hotter than they were just a few weeks ago. I clean the dust from my computer on a regular basis and at the moment, I don't see any problem there when I checked it. It might be that I need to redo the thermal paste on the CPU cooler, but thought that since I would need to remove the cooler to do that, I might as well bite the bullet and get a better after market cooler. I do not run games on this computer, nor do I have the CPU overclocked. So I guess what I would like is some recommendations on a new CPU cooler. My case is the Coolermaster Haf X full tower so I have plenty of space.

Thanks a lot, LittleJay

A:New CPU cooler for my PC

Coolermasters Hyper212 would be perfect, it's cheap, and it does what it is supposed to.

Read other 9 answers
RELEVANCY SCORE 32.8

Hi Guys, just changed my desktop case to a new opera media case, but now the CPU fan seels very loud, can anyone recommend a new silent fan, I am running windows 7, on a ASRock 4 core sata2 motherboard, with pentium quad 4 processor, thanks
 

A:Cpu cooler

I have the older ver of this cooler and it is almost silent unless stressing the system; then you can hear it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16835186134
 

Read other 1 answers
RELEVANCY SCORE 32.8

Hey
I'm planning on over clocking my E8400 as I feel it is bottlenecking my system at the minute, I've had it for a while and I'm beginning to see it slowing. So for the time being I'm planning to over clock it to tie me over till I can afford a Sandy bridge model/MB/DDR3.
I'm looking for a 3.8GHZ - 4GHZ over clock really, however if I have poor chip 3.6 will do lol.
I need some advice on what cooler to buy, I've been having a look around and the 2 which stand out for value as well as OK performance is the Cooler Master Hyper 212 plus, and the Arctic cooler 7 pro rev 2. They are both fairly cheap which is what i wanted
Of course different sites say different things, I have read a lot of good things about both, but recently read a review from toms hardware and the Hyper 212 was apparently brilliant for its price and still good for enthusiasts while the AC 7pro lacked behind for bigger over clocks.
I wanted to know your opinions and gather your advice
Any thoughts are much appreciated.

Thanks
 

A:Which cooler for OC ?

Read other 16 answers
RELEVANCY SCORE 32.8

I am not overclocking my i7 but was wondering if anyone knows the best cooler that will fit with a gigabyte EX58UD4P with an i7 and in a Antec 900 case. I have two 3870X2's crossfired and the extra fan on the case side. I am running Rivatuner as the fan control on the ATI cat does not work for the 3870's. It never gets hot but I thought I might want to push it some and see what I can do. Yes, It has the stock Fan for the i7. LOL

A:CPU Cooler

here are some universal coolers

Micro Center - Extreme Spirit II Universal Northbridge Chipset Copper Heatpipe Cooler

Micro Center - G Power Lite Universal Heat Sink

Micro Center - 92mm 3-Heat Pipe Universal CPU Cooler

Micro Center - CNPS7500-AlCu LED Universal CPU Cooler - i use this one overclocked and my temps never go above 38c

there are two stores in cali or you can order online.

Read other 16 answers
RELEVANCY SCORE 32.8

Ive got myself a graphics card, but i require a cooler for it as it doesnt have one currently.

I was wondering if anyone had any suggestions regarding what i should get.

the card is an NVIDIA GeForce 8800 GTX OC 768MB.
(importantly i dont want to accidently buy one that doesnt fit the card)

thanks

Alex
 

A:GPU cooler

You could use something like this one.

http://cgi.ebay.co.uk/DuOrb-CL-G011...ponents_Fans_Heatsinks_SR?hash=item2c51b47142

Or This

http://cgi.ebay.co.uk/DUORB-CL-G010...ponents_Fans_Heatsinks_SR?hash=item2c528fb38b
 

Read other 3 answers
RELEVANCY SCORE 32.8

is the

Noctua NH-U12P CPU Cooler

or the

Arctic Cooling Freezer Xtreme Rev.2

for i7-920
 

A:CPU cooler

Both can be used with i7-920 .
 

Read other 1 answers
RELEVANCY SCORE 32.8
Q: Cooler

Monday after work I am going to grab one of these

COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 Continuous Direct Contact 120mm Sleeve CPU Cooler Compatible with latest Intel 2011/1366/1155 and AMD FM1/FM2/AM3+ - Newegg.com

what do you think, have a better recommendation? I work about five miles fro Fry's so I will grab it instead of using newegg

A:Cooler

I would consider a sealed water system !

http://www.tigerdirect.com/applicati...5954&CatId=499

Fry's steal then add two or four quality fans!
http://www.frys.com/product/6792655?...H:MAIN_RSLT_PG

Read other 9 answers
RELEVANCY SCORE 32.8

Im going to be upgrading from my basic Saphire stock cooling which consists of a fan with some copper around it and a small copper film on top. My card runs at an average of 69C and this just wont do any longer. I was wondering what will give me the best results? I need the site to allow paypal echecks as I dont have credit cards and refuse to wait for money orders to arrive. Thanks to anyone who can help me
 

A:Best GPU cooler?

Read other 16 answers
RELEVANCY SCORE 32.8

Hey, soon i wanted to overclock my Amd athlon ii x4 640 so i wanted to ask for some suitable cpu coolers which are quite cheap and also effective, i wanted to look at around 15 - 25 pound? is there any that you would suggest?

Thanks in advance.
 

A:Cpu Cooler

Read other 11 answers
RELEVANCY SCORE 32.8

Hi! I couldn't decide on which liquid CPU cooler to get so I decided to ask TenForums.

I want a good CPU cooler that liquid cools because those are better.

My max budget for a liquid CPU cooler is $70 so if you recommend one that isn't on this list, please reply it.

If possible, LEDs please.

Here is my Build: (I know there is no CPU cooler): Core i7-6700K 4.0GHz Quad-Core, GeForce GTX 1070 8GB G1 Gaming, SPEC-ALPHA ATX Mid Tower - System Build - PCPartPicker

Here are the ones I'm thinking about:

Corsair H60 V1: Corsair H60 54.0 CFM Liquid CPU Cooler (H60 (CW-9060007-WW)) - PCPartPicker

Corsair H60 V2: Corsair H60 74.4 CFM Liquid CPU Cooler (CWCH60) - PCPartPicker

ARCTIC Liquid Freezer 120: ARCTIC Liquid Freezer 120 74.0 CFM Liquid CPU Cooler (ACFRE00016A) - PCPartPicker

NZXT Kraken X31: NZXT Kraken X31 69.5 CFM Liquid CPU Cooler (RL-KRX31-01) - PCPartPicker

Thank you in advance.

Read other answers
RELEVANCY SCORE 32.8

Hey, I was looking at the Intel QX9770, and wanted to overclock it to about 4.0 GHz, cause I know of someone who did on Air Cooling, and I know it's possible, most likely with all these fans, but I want to know the best one. I was wanting to know, what would be the best cooler out there that would keep it cool on idle, and on extreme load playing Crysis and a billion other scanners and stuff running at the same time, pretty much while screaming. I saw a few coolers that looked good, which do you think would be best, or do you know of another that's even better? Thanks Everyone!

Also, this would all be in the Cooler Master Cosmo S Case on a EVGA 790i Ultra FTW Edition Motherboard; and the size of the CPU Cooler isn't a problem, so don't base your opinion on that. I just want to know what will give the best cooling.

ZEROtherm Nirvana NV120
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3273116&CatId=99

Cooler Master Hyper 212
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3486534&CatId=493

Ultra ChillTec Thermal Electric Cooler (Worried about Condensation cause the way it cools)
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=2353734&CatId=1588

Thermaltake V1
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3071635&CatId=1588

Thermaltake DuOrb
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3829118&... Read more

Read other answers
RELEVANCY SCORE 32.8

Im running and intel i5 750 on a gigabye P55A UD3R motherboard with 4 GIG DDR3
and a gtx 275 GPU.

Ive been looking at thermeltakes coolers but cant make up my mind?

any suggestions?

thanks

A:what cpu cooler should i get?

You should get the cooler master hper 212+ best cooler for the money
Hyper 212 Plus - Cooler Master

Read other 9 answers
RELEVANCY SCORE 32.8

I'll soon be buying a 8800GT card and was wondering whats the best cooler for this card? If you can, please give me a link, thank you in advance.
 

A:Best VGA cooler?

You need to fill out your profile system specs area and your country so we know what site to direct you to.
 

Read other 1 answers
RELEVANCY SCORE 32.8

Hi does anyone know of any good cpu coolers i can use for my Phenom X4 which i do not need to move my mobo and connect it etc?

A:Cpu cooler

I used this Zalman unit till I went with the H50.
Zalman CNPS9900LED CPU Cooler - Socket 1366, 775, 754, AM3, AM2, AM2+, 940, 939 at TigerDirect
The Zalman doesn't require a back plate but they provide on if you want. The fins are seriously sharp and installing this sucker is a trick but it cooled well !

Read other 4 answers
RELEVANCY SCORE 32.8

I'm looking to overclock my AMD 5000+ Black Edition and I was wondering what would be the best cooler for me to get? I can afford to spend about 25 and will probably be buying from www.microdirect.co.uk. Could anyone help me find a decent cooler? I just don't know much about coolers and am getting bogged down with all the info. I was looking at the OCZ Vanquisher which is on offer but I don't know if this will be much good for overclocking.

Any help would be appreciated because I just seem to be going round in circles

Rach
 

A:Which CPU Cooler?

www.Anandtech.com Click on cooling tab.
 

Read other 3 answers
RELEVANCY SCORE 32.8

I'm looking for a completely silent CPU cooler, and I have already checked some options from thermaltake and thermalright with huge fanless heatsinks. The problem is that those seem too large to fit inside the case, and the pictures taken only show them on a motherboard outside of any case.
1) Do you know of such a fanless heatsink that can fit onto the case, and maybe even extend outside of it?
2) Can such a fanless heatsink support a quad core CPU (With case fans of course, particularly 2 120mm fans)?
 

Read other answers
RELEVANCY SCORE 32.8

I'm planning to upgrade my motherboard and CPU to a Gigabyte GA-EP45-UD3R (rev 1.1) and Intel Core2Quad Q9550 respectively, in the next few days.

I am planning to buy a Thermalright Ultra-120 eXtreme CPU cooler because the stock Intel cooler just doesn't cut it in our Indian summers. I'm hearing very good things about this particular CPU cooler, and need to know whether it will fit on the motherboard.

I know this is probably nothing to do with the trend of this board, except that I do run Windows 7 and plan to do so for the conceivable future (or until the next version of Windows arrives, whichever is earlier).

If any of you people here are running this combo or know someone who does, could you please let me know what the experience has been like?

Quick replies greatly appreciated, as I need to get the payment part done tomorrow, so I can have the parts in hand for the weekend.

Mods, please move this thread to the appropriate forum if necessary.

Thanks in advance,

NPP

A:Some help - CPU cooler

Don't have the MB, but looking at its image in Newegg, it looks like it should. I would also make sure there's enough clearance in your case. I know mine almost didn't fit, if not for the fact the side panels are recessed.

Read other 2 answers