Over 1 million tech questions and answers.

Realtek HD audio manager, change a mic port to a headphones port?

Q: Realtek HD audio manager, change a mic port to a headphones port?

My laptop had headphones plugged in because I was watching a film, but while I was in another room, my laptop was knocked onto the floor (around 1.5-2 ft drop) landing on the headphones jack, the wire is fine, but the ports completely broken, I can see cracks and its loose and everything

The laptop has Realtek HD audio manager, and in my experience of this program on other desktops I've had, I was able to change what port does what.

My laptop only has a headphones port and a mic port, and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic, however in Realteks audio manager I can't find out how to do this. In pictures I've seen on the internet there is a "Device Advanced Settings" button (as seen in this picture http://www.vistax64.com/attachments...ealtek-hd-audio-driver-version-hd_manager.jpg) but my program doesn't have this.

Do I need to download a newer version of the software? or is it just not possible to change my mic port to be my headphone port? I dont mind if I have to use third party software, I just want it to tide me over till I can get it sent away.

Thanks for suggestions, greatly appretiated

RELEVANCY SCORE 200
Preferred Solution: Realtek HD audio manager, change a mic port to a headphones port?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.

Read other 13 answers
RELEVANCY SCORE 110.8

I have No Optical port in Realtek HD audio manager. I have the latest driver. It's still not there. Hooked up to logitech z5500 with optical only works in 2.0 mode no 5.1. I have tried for 10 hours to fix this and really need help.

A:No Optical port in Realtek HD audio manager

Is your motherboard's BIOS up to date for Windows 7? (P10 - EVGA 780i (NF78) - P10 BIOS Released )

Read other 5 answers
RELEVANCY SCORE 94

Hi all,


Well.The headphones works and all which is great but the Realtek Aduio Manager and Windows sound is detecting Speakers.Does anyone know how or if I can change it to Speakers?.


I would really appreciate the help,

Thank You.


Windows Sound



Realtek HD Audio Manager

A:PLS Help* Headphones realtek Audio Manager

If I'm understanding what you're trying to say, it sounds like your headphone port is not recognizing that the headphones have been plugged in. I would first try plugging in another set of headphones to see if the problem is the port or the headphones.

Also, did your headphones come with a CD, driver, or any other installation help? What about an instruction booklet from the manufacturer? Can you call the manufacturer's tech support to ask for help?

Also, have you checked your IDT Audio settings? Go to the Control Panel and open the IDT Audio Control Panel? Under "Speakers and Dual Headphones? go to the Playback section and then click on Settings. Check: 'Set as default.'

Read other 3 answers
RELEVANCY SCORE 92.8

Simple problem that has been confusing me lately. I'm using a Acer Aspire 5570-2052 Laptop running Windows Vista. On it is Realtek HD Audio Manager, and it has been causing me some problems with headphones.

To elaborate, they simply don't work except on random occurances. The speakers put out sound as normal, but when I plug in my headphones, ANY pair of headphones, no sound comes out of them and the speakers continue to function as normal.

It's wierder then that though, rarely the headphones WILL have sound come out of them, but the speakers are still putting out sound as well. The only way the headphones themselves have ever worked is when I go into the Windows sound manager, and pressed the main mute button which muted the speakers, but not the headphones.

Now not even the headphones work though, so that method is moot. For reference the Realtek driver is 6.0.1.5334, last updated on 12/1/2006. I'm going to update it today(have to do so from the library), but I doubt that'll work given the wierdness of this problem...
 

Read other answers
RELEVANCY SCORE 92.8

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 92

Hi there!

Before I start with stuff, I'll link my hardware and drivers used:

Headset:
SteelSeries - Gaming Headsets - SteelSeries 7H Fnatic Edition

Motherboard:
ASUSTeK Computer Inc. - Motherboards- ASUS P8P67 WS Revolution

Sound card (removed):
ASUSTeK Computer Inc. - Multimedia- ASUS Xonar DX

Drivers:
ASUSTeK Computer Inc. - Motherboards- ASUS P8P67 WS Revolution
(Realtek 889/892 Audio Driver V6.0.1.6257 for 32/64bit Windows Vista & Windows)

Other drivers:
Realtek
(HD Definition Drivers)

So I bought a new computer not too long ago and I've had some issues with my headset and whatnot. I have a ASUS Xonar DX sound card with an optic fibre cable for my Logitech Z-5500 system and they worked just fine with it.

However, when I bought my headset (Steelseries 7H Fnatic, normal non-USB) I had issues. When I plugged them into my motherboard it couldn't find them. And when I tried to plug them into my Xonar card, people I was skyping with could hear my sounds (videos I watched etc) even though I had earplugs. So I removed the card and decided I'd go with the normal drivers etc. So I checked ASUS website and got the drivers.

I installed the drivers (Xonar drivers uninstalled clean before) and it asks me to reboot. I reboot and I get the message: "No speakers or headphones are plugged in." from the system tray. I run dxdiag and no sound card is detected (it's just empty where there should be driver names etc). In the control panel there is no Realtek option etc. ... Read more

A:No speaker or headphones are plugged in and Realtek HD Audio Manager

Bumping this since I got no answers.. I found a thread like it, but to no help..

No sound in windows 7

I have no tray of the HD Audio Manager, and the only files in my install folder are RtlUpd64 and some other file as I mentioned above. Drivers from ASUS website aren't working either. Please help, been without sound for a few weeks now..

Read other 2 answers
RELEVANCY SCORE 92

Hello everyone!

I got my new headphones today, but the sound isn't working. I plugged them into the audio jacks, and realtek audio manager recognized them and said that an audio device has been plugged in. The mic is working fine, its just the headphones that don't work.

The headphones aren't muted, "Realtek digital output" is set as the default device (I'm not sure if that's the headphones, my old headphones broke and I haven't had any for a few months now so I don't remember what it was like before). I've tried inserting them into the audio jacks on the back, but that doesn't work either.

Any suggestions?

I'm on Windows 8.1 64 bit if that matters.

A:Realtek audio manager recognizing headphones but no sound?

Huh, I seem to have fixed it myself. I'll post the answer here just in case anyone is as clueless as me!

I was going through all the devices listed under "playback devices". I right clicked on all and looked at the "jack information" section. I found out the Realtek HD Audio 2nd output was the one that was connected to the front audio jack.

When I connected my headphones to the audio jack, when the Realtek audio manager asks you what type of device it is, I had to click "Headphones" instead of "Line In" like I did with my previous headset.
Then you go into playback devices and set the Reaktek HD Audio 2nd output as your default device. If you're using a program like Skype you might have to go into audio settings in the program and change it there as well.

If you don't have the Realtek HD audio 2nd output in your playback devices: Open the Realtek audio manager, and at the top by the close/minimize button click the settings button. Go into options, and tick "Make front and rear output devices play two different audio streams simultaneously".

Read other 0 answers
RELEVANCY SCORE 92

Hi,

I recently purchased a new desktop for myself, and upon trying to plugin my apple headphones to watch netflix, I found that I was having some trouble.

When I plugin my apple head phones, I get a popup that looks like this:



and I choose line in (so that the mic and the speaker can both work on the headphones so I can talk in skype).

After selecting that, I'm presented with this page:



From there, I have no idea what to do to get my mic and speaker on the headphones to work. I tried the sound settings in control panel, and I tested the speakers but I didn't hear anything from them.

Appreciate any help.

Thanks!

A:Realtek Audio Manager Line In (Apple Headphones)

First, you need the Mic input for the microphone. Computer mic's (at least PC computer mic's) require 5VDC for the mic to work. Only a Mic input has this. The line input is two channel stereo and does not provide the needed 5VDC.

The Headphone side is different and independent of the microphone.

Recording, you want the CD Quality, 16bits 44.1Khz for standard audio. That is what is used for commercial CD's, audio wav files, etc.

Read other 9 answers
RELEVANCY SCORE 90.8

Hey guys, as you can guess I'm using Realtek HD Audio Manager. Now, every time you plug in a device, it asks you to pick what it is- in my case it's "Headphones" or "Front Speakers Out"(at least, for me, that's what it says.) Unfortunately, it seems the default is Front Speakers, which is annoying because I find a distinct different between the two. And I don't really want to have to change the setting manually, every time I restart, or change a setting(It reverts back to Front Speakers Out every time I do that.)

Would anyone have any idea how I can prevent this? Thank you. I'm using Windows 7 64 bit, if that helps.
 

Read other answers
RELEVANCY SCORE 88.8

When trying to use my Bose Soundtrue headphones with inline mic and a Y splitter for sound and mic it stops working in windows 7. I thought it just wasn't compatible somehow but I did a driver upgrade and then all of a sudden it works swimmingly for a while. Then it stops. Reboot doesn't fix it. I have my monitor hooked up via HDMI and I do have a logitech web cam. Attached is a picture of my recording devices.

A:Gigabyte Realtek HD audio mic port stops working

P.s. I have Windows 8 setup as a dualboot and the mic works in Win 8.

Read other 1 answers
RELEVANCY SCORE 86

1. I would like to change my COM 1 TO COM 3.
Can this be done in the CMOS? or is there a simplier yet effective way that it can be done?

I need your help as soon as possible.

[Edited by Jsimon on 08-16-2001 at 12:13 PM]
 

A:How Do I change Com.port 1 to Com.port 3? My modem is silent. Dual booting problem

What do you mean by changing COM1 to COM3? Do you want to move a device? Reassign IRQs? Physically pick one up off the motherboard and move it?

Your modem sound is usually configured in two places. One is in the Control Panel, and the other is in the Dial-up Networking settings. Adjust the volume there.

Are you running Windows 2000 and Windows 98 on separate paritions (drive letters)? If so, you'll need to use special software to convert the FAT32 file system to NTFS. I believe Parition Magic will allow this without data loss. However, I would never make such a large system change without first backing up data. There is always the chance that everything could get wiped out.
 

Read other 1 answers
RELEVANCY SCORE 85.6

guys i miss the old audio manger
when it pop's up a balloon asking you what that port will be

i need to change my computer rear line in to headphones or speakers

any way to do it ?

A:how to change audio port

Right click on the speaker on the taskbar, select playback devices, and change it from there.

Read other 15 answers
RELEVANCY SCORE 84.4

How does one change the kbps speed in RealTek Audio Manager?
I have this setup:
Win 7 Home Premium 64bit, I5, 6GB RAM, and
RealTek HD Audio Manager:
Audio Driver Version:6.0.1.6586
DirectX VersionirectX 11.0
Audio Controller:HD Audio
Audio Codec:ALC892

This is what I'm doing:
Right-click on the Realtek HD Audio Manager icon in the system tray. Select "Sound Manager."
Select the "Default Format" tab. Select a sample rate and bit rate from the drop-down menu.
I choose 16Bits, 192,000 Hz.

Click "OK" to close the audio manager(there is no 'OK', I 'X' out the program).

Right-click on the Realtek HD Audio Manager icon again. Select "Sound Recorder."
Press the "Start Recording" button to start recording.
It records at 92kbps, not what I have chosen.
How do I get this to record at the kbps that I choose?
Thanks!

A:How does one change the kbps speed in RealTek Audio Manager?

What do you need 16 bit 192KHz for? CD standard audio is 16 bits 44.1Khz. I have a recording studio and record at 24 bit 44.1Khz but when I do final mixdown its to the "standard" 16 bits 44.1Khz.

The only thing higher bit rates are going to do for you is create bigger music files.

Read other 8 answers
RELEVANCY SCORE 80.4

I have suddenly gotten this on my main computer. (Windows XP)
A previous techguy thread (expired) said to check my dns numbers with "jpconfig /all"
However, my computer will not allow me to run that program in safe mode.
Is it a bug issue... or will that program only run in full mode?
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Dear mulebit,
It actually is " ipconfig /all " i.e replace" j"with "i".Please go to command prompt under Start--> Programs-->accessories. No need for "safe mode" to carry out this task. Can you kindly provide details of your computer specifications? Are you using a third party firewall and if so which brand? What security software are you running?
 

Read other 3 answers
RELEVANCY SCORE 80.4

I am a beginner really and got this message after eliminating (hopefully) a prgram called Antivirus Action from my computer. I can't get on the internet because I keep getting this message. Any help would be greatly appreciated!
Mike
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Open Internet Explorer. Click Tools > Internet Options > Connections > Lan settings > Proxy server > Advanced. Delete the proxy server settings under HTTP, HTTPS (secure) and FTP (and Socks, if any). Then, under Proxy server, uncheck all boxed.

If running Firefox too, disable proxy server.
 

Read other 3 answers
RELEVANCY SCORE 80.4

Hi

Please help i cannot connect to internet explorer!

I am getting the error message

Check the Firewall settings for HTTP port 80, HTTPs port 443 and FTP port 21.

My provider is tiscali and i have done the trouble shooting with them to no avail, Also tried to disable the Norton firewall functions and still didnt connect. My broadband connection is showing excellent between the router and pc with both wireless or with the lead.

I have Spybot and Ad-aware on my computer and norton internet security 2006.

Do i have to clear the Firewall settings for these ports or can anyone help me .... please!

Thanks a million

Angela
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Read other 6 answers
RELEVANCY SCORE 80.4

Hello all. I was talking on skype and lost internet connectivity while talking. I received the error above (Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message). I am running a laptop with windows XP and IE 7 and my antivirus is AVG and I also have Ad-Aware.

I'm not much of a computer person but I did some research online and tried a few things: I turned off the option on skype's advanced settings for it to listen on Port 80 and then rebooted. I also ran a command, 'netstat -aon' and did not find a listing of 1270.0.1:80/443 or 0.0.0.0.80/443 which seems to imply that nothing should be affecting port 80 or 443.

I also downloaded firefox and it cannot access the internet either. The only way I'm able to access the internet at the hotel I'm located at was to call the hotel's tech support and they had me go into the LAN settings of internet options and manually select port 8080.

Any more suggestions would be greatly appreciated!

Thanks,

Mike

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Some info on common ports used, http://www.chaminade.org/MIS/Articles/Fire...ortSecurity.htmI don't know much about connectivity problems...but it seems to me that...if you never had this problem before and your system connects properly outside of this hotel...the hotel/location may be the problem.Worth a read, IMO: http://en.kioskea.net/forum/affich-37752-c...on-the-internetLouis

Read other 4 answers
RELEVANCY SCORE 79.6

I originall posted a topic in SevenForums the other day, though I recently found a closed thread here with a problem that sounds very similar to the one I am having; however the one response it got was very dissatisfying to my disappointment.

The thread I found on here stated the following:

I work for an organization with about 300 employees and almost all have computers. I have experienced the following issue on several machines over the years and still cannot find an answer anywhere on the internet, so I am posting here.

I have an HP business desktop that has two parallel ports in it: LPT1 and LPT2. On a rare occasion the printer connected to LPT1 will jam and I have to clear the paper out of the paper path. After I clear the jam, the computer is no longer able to print anything to LPT1. If I use the application that prints to LPT1 again, I get an error in the application stating "The requested resource is in use. (170)" Others on the internet have reported similar errors and in a few cases, the exact same error, but no luck with a solution. Further, there is no error in the Event Viewer's application or system logs.

So, I have tried:
+ uninstalling LPT1 port from the Device Manager, reboot, and still no luck. Same error.
+ uninstalling LPT1 port from the Device Manager, shutdown, disable the parallel port entirely, boot into Windows, shutdown, re-enable the parallel port, boot into Windows. Same error.
+ Reassign LPT1 port to LPT3. Same error.

More in... Read more

A:"Parallel port not working" Re-open: Must manually change LPT port after each reboot

Read other 6 answers
RELEVANCY SCORE 78

Hi,

I saw this problem listed, but My issue is a bit different and the previous solution didn't work for me.

Please forgive me if any of my posts offend, as I am new to this site. I don't intend to be rude, but my ignorace may anger some. Also forgive the length of the post, I wish to be thorough as to avoid getting possible solutions that I have already tried or are not relavent.

I recently had some repairs done on my computer which involved reformatting my hard drive and when I got it back started having trouble accessing some internet sites. Unlike the previous person's post with this issue i can still access the internet and 95% of sites, but a select (and seemingly random) few give the IE cannot access website error. When I run the networking Diagnostics for Windows XP get the following error:

Check the Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

The only firewalls I know of on my computer are Windows and my router (both of which I have disabled) i have also tried Firefox and it craps out at the same exact sites.

In addition to selected sites, some third party programs are having trouble accessing the internet. This includes Nortons Installer (I haven't been able to install my antivirus yet because of this error) and I haven't been abble to register Microsoft office after I installed because it cannot access the internet for ID Key Verification.

I have tried turning off all LAN proxy settings, and power ... Read more

A:Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

Read other 8 answers
RELEVANCY SCORE 78

Well, this has me baffled. My Bell Internet Security Services Activation (I just installed it on a computer not used for some 4 or 5 months) popped up a window saying "Waiting for Internet connection"...and waiting and waiting. But my Netgear wireless connection to the router in the house indicates "very good" signal strength, which I thought meant I was connected. Obviously not!

I tried opening IE. "Internet Explorer cannot display the web page" (much as I expected)

Clicked the button which was showing on the IE cannot connect page "Diagnose connection problems" and followed the instructions. The final diagnostic is "Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by firewall settings on this computer. Check the firewall settings for the ports HTTP...etc." Where on this earth are they?!

I checked the Windows Firewall settings and found it "off (not recommended)" so I switched it on.

I re-ran the diagnostic on the IE page and nothing has changed.

My question is:

How do I check the settings for HTTP port (80) and HTTPS port (443) and FTP port (21)? Also what do I set them to?

Many thanks, in advance, for a solution to my problem!
 

A:Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

So you just installed an Internet Security Suite which has a Firewall built-in and then you enabled XP' built-in firewall? I am baffled as to why you would do that. The new software you installed has to be blocking it somehow. I would search their website for known issues.
http://www.securityservices.sympatico.ca/ssp.do?lang=en

Or just uninstall it and use something different.
 

Read other 3 answers
RELEVANCY SCORE 75.6

It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks

A:Difference between Realtek HD Audio Manager & Realtek HD Audio Driver

  
Quote: Originally Posted by Swiftkidd


It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks


Realtek HD Audio Manager is a software driver used on Windows computers. It handles recording and playback of audio programs. It is required for many audio programs to operate.

While Realtek HD Audio Drivers is a tool that allows you to listen to audio in HD on your PC.

Stereo Mix is used to transfer audio that the PC is playing to recording software such as Audacity, so that you can record what you?re hearing.

When one upgrade their OS like in your case from XP to Win7 with the same motherboard and sound card it is always advised & recommended to download the latest soundcard driver, because the only thing that had changed was the operating system.

The advice is not to go to windows for it, but to go to the motherboard manufacturer, because it would be specialised for the system rather than ... Read more

Read other 2 answers
RELEVANCY SCORE 74.4

Recently purchased an HP Omen and would expect interoperability but headphones don't fit in port which is a MAJOR functionality issue in terms of every day usage.  Questions for HP: 1) Is the product deliberately designed to NOT be compatible with standard headphones?2) Or is there a manufacturing defect in the product that will be fixed?3)  If the answer to 2) is NO, can you provide a part (link please) which will connect headphones to  the Omen computer?  Will appreciate a clear resolution. 

Read other answers
RELEVANCY SCORE 74.4

Speakers are fine, but on plugging in headphones they go mute, and so are the headphones.  Yesterday they worked perfectly.  Have checked with three sets of phones- same result. 

A:Headphones port on hp6465b

Thanks for your feedback. Here is the drivers available for your model http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5100168 You might try to reinstall the driver your PC to resolve the issue. Thanks

Read other 1 answers
RELEVANCY SCORE 74.4

I didn't know what forum this should be put in... so if this is the wrong one, please move the thread accordingly.

Anyway, I have a Dell Dimension 2350, with Windows XP.

There are 3 headphone ports on the computer. One at the back, where speakers are usually plugged in, one at the bottom of the front, right beside 2 USB ports, and one under the disc drive, with a volume wheel right beside it.

The one under the disc drive has never worked. I get no sound what so ever.

The one at the bottom beside the USB ports was working fine until a day or two ago, and then the sound now only comes out of one earphone. The one at the back has the same problem, although both sides work with the spearkers.

I have tried different headphones, and I get the same problem. And I have tried these headphones with my Discman, and both sides work perfectly fine.

Does anybody know what the problem could be?
 

A:Headphones Port Problem

Read other 6 answers
RELEVANCY SCORE 74

Dears 
         I Ask if i can change the port 80 to another port like 70, So that the url for example  www.xxxx.com:70 ? can i do that with out firewall, just from the windows direct ?
thanks for everyone

Read other answers
RELEVANCY SCORE 72.4

Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?

A:Realtek HD Audio Manager and Realtek Audio Driver

  
Quote: Originally Posted by NTexan


Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?



Welcome to SF!
Realtek HD Control Panel is in the Windows notification area. See image below. I hope I helped!

"PLEASE REP ANYONE WHO HELPS YOU"

Read other 7 answers
RELEVANCY SCORE 72

Hi,

This is driving me mad now also as soon as I google it there seems to be hundreds of similar problems..

New custom PC and cant get any sound from the rear speaker jack of front headphone jack. Sound is playing as the volume leve indicator is moving up and down and is green yet no sound outputted.

Tested speakers and headphones on another machine.
Re installed the hd audio driver.
Disabled and enabled driver.
Disabled the nvida hdmi sounds drivers.
Made sure the realtek driver is default.
Checked bios has onboard sound turned on.

Now i dont seem to be getting anywhere very annoying. Please help

Many thanks,

adam

A:Realtek HD Audio - No Sound through speakers \ headphones

I just went through this with another user and a Gigabyte motherboard. Never really resolved it as the user didn't want to do a complete reinstall. Everything else had been done and the user still had the problem.

However, lets try on yours.

First thing, go to the Device Manager, RIGHT click on the entry for the RealTek sound and then LEFT click "Uninstall". DO NOT uninstall the drivers. Restart the PC and when Windows starts it will detect and reinstall the sound.

If that does not fix it, uninstall the RealTek in the device manager but ALSO Uninstall the drivers. Then restart and when Windows starts, it will install the sound but it should be with the generic Windows "High Definition Audio Driver". See if the sound works with this configuration. If it does, it sounds like the RealTek driver you have may be corrupt. Download the R2.75 High Definition Codecs driver direct from RealTek and see how that works. www.realtek.com

Read other 9 answers
RELEVANCY SCORE 72

I have an Asus M4A89TD pro / usb3 that has Realtek audio onboard. I have just finished my build and have never been able to get any sound from any of my IO ports. None of the ports recognize anything that I plug in (i only have 2 sets of 2.1 speakers, one uses a single light green jack and the other uses the light green jack and a black jack.) I DO get sound from some old usb headphones. The integrated Realtek audio does not detect any analog connection (tried with mic/speakers/headphones) in any of the jacks.

I removed the current drivers through uninstalling from device manager, rebooted, then installed the latest drivers from Asus, then Realtek directly. Additionally, I disconnected the front audio jacks from the motherboard in case that was causing a problem. Windows detects the audio device and there is no problems in device manager.

I've gone through every available option in the Realtek sound control options, but I'm at a loss. I have a USB headset that works without a problem, but I can't get these analog speakers to work. Any advice? The "set default device" is grayed out as an option for the speakers as well as saying they are "not plugged in".

I went through all the above several times with different drivers, uninstalled my graphics card (completely removed it from the motherboard during one setting), RMA'ed my motherboard, spoke to Asus support (who state it is a driver/software issue) to no avail over about a 3 week period. How c... Read more

A:realtek audio not detecting speakers or headphones.

Unplug all your inputs.
Plug in one device at a time.
If the Realtek software is functioning properly you should see a pop up after plugging in the green main speaker plug.


After confirming by pressing OK, you should get the following.

You should then plug in the black input and go through the confirmation process, again.

Read other 9 answers
RELEVANCY SCORE 72

Hello

When I plug in my headphones to the back of my computer where my onboard soundcard is located, it seems that realtek detects my headphones as speakers, and as a consequence, the volume is way too low.

When connected to the front of my computer however, realtek detects my headphones as headphones, and the sound is much louder, however for practical reasons I prefer to have my headphones plugged into the back of computer, but the low volume is a bit of a problem.

A:Realtek HD audio recognizes my headphones as speakers

The rear GREEN speaker jack is for amplified computer speakers. When something is plugged in to that jack, the PC will assume its speakers, since that is what the jack is designated.

Read other 9 answers
RELEVANCY SCORE 71.2

I just bought a pc, windows 7 32bit. I tried to use my headphones but couldnt hear any sound, also tried speakers still no sounds. The green bar goes up on the volume control tho.

I have tried downloading some drivers, but they didnt work.
Im a novice when it comes to things like this, can anyone help?

if you need any information about my pc let me know.

theres some audio ports at the back of the pc and at the front. both dont work.

Thanks if anyone can help, i really dont know what to do

A:Realtek AC'97 Audio - Cant hear any sound from headphones or speakers.

Anyone?

Read other 5 answers
RELEVANCY SCORE 71.2

Everything was working fine until about 9 months ago. I have tried switching settings on realtek and the windows control panel to headphone mode, but no matter what settings are on, my computer fails to mute the speakers when playing through headphones. There are absolutely NO troubleshooting topics on windows or realtek websites about this. Help!

A:My Realtek Audio Driver Plays Headphones and Speakers

I think I remember in the realtek settings on my old computer it said something along the lines of "disable front audio when headphone is plugged in" with a check box to toggle on and off.

-- do you see any settings resembling that?
If you have already found the on/off and it does not work, try uninstalling and re-installing the audio drivers and software.

Read other 1 answers
RELEVANCY SCORE 71.2

I'm getting frustrated with trying to get all these options to play together correctly when it comes to my headphones. When I plug my headphones in the front jack, nothing changes unless I manually switch the default Playback Device. All things in question work, and well. However, depending on the convoluted configuration at the moment, either the monitor will keep playing & the headphones will play nothing, OR the monitor will keep playing & the headphones will also start playing.

Setup right now:
Monitor= ViewSonic VX2253 22"
(built in speakers, I own no others)
Connected to my video card via HDMI.
Connected to back green audio input.
Relevant internal settings through monitor= set to "HDMI PC" (as opposed to AV)Audio input set to HDMIOnboard Audio= Realtek? ALC 892 8-Channel High Definition Audio CODEC
This is what the green audio plug is plugged into from the monitor.
Controls the front headphone jack.

I have tried as many different combinations of settings as I could think of. Any ideas how to make the monitor speakers play nice with the headphones???

d(--n--)b

A:Headphones vs Monitor: HDMI audio, SRS for Monitors, & Realtek ???

Normally, when you have something connected to the HDMI port on the PC, the HDMI becomes the default audio playback device. Thus the regular PC audio (Realtek in your case) is not used. This would account for not having headphone audio. You can manually change the default playback device to "Speakers" (your PC sound device) and then you should get the headphone sound. I would suspect you will have to do this every time you boot your PC.

Read other 5 answers
RELEVANCY SCORE 71.2

So I had this fresh Windows install. Everything was normal, I plugged my earbuds into the cable and the cable into the rear green and pink I/Os... As always!
Now, I was able to hear everyone, and everyone were able to hear me, its just that when I listen to music, and talk to friends on Skype, or play games while on Skype, my friends can hear everything I do and its annoying. So I figured I need to install realtek HD audio drivers. Once I did, I was able to hear them but they weren't able to hear me. My mic stopped working and the weird part is that they were able to hear my Windows sounds. All the sound tests I've done, they were able to hear it, but not my voice.
I uninstalled the driver and from their it was a total disaster. I disabled and enabled drivers, updated them through Windows updates and all of the sudden the mic works but I can't hear anything, then after another restart and changes, I can hear everything but the mic doesn't work.
I'm completely lost, and sick of doing system restarts all the time.

Currently, my mic seems to work but I can't hear anything. Why? And what should I do?
EDIT: I just uninstalled Nvidia HD Audio drivers and installed only realtek. Only mic doesn't work, but speakers and headphones do work...

A:Mic and headphones only partialy work since Realtek HD Audio install

The RealTek needs to be set as the default audio playback device. The NVIDIA HD is only for HDMI audio. If there is an HDMI cable plugged in, Windows will automatically set the NVIDIA as the default playback device and the Realtek will not work. If there is no HDMI cable plugged in, NVIDIA will not take over.

Stereo Mix needs to be set as the default recording device. Then whatever device you have plugged in, such as a microphone will work.

If you have front panel mic and headset connections, those would seem to be easier to access than the rear connections.

Read other 9 answers
RELEVANCY SCORE 70.4

If i connect my headset with microphone to port in my PC's front, it notifys both new microphone (line out) and headphones (line in) (no usb, dont remeber what its called in english, ports also working cause notifys new devices).

I have Windows 7 installed and Realtek HD Audio Manager and its newest drivers. Microphone also works if i plug it to back of the PC (considering swapping between speakers and headset, would really prefer if didnt need to use ports behind PC). I also gone thru settings etc. and as far i can tell, it should work.

A:Problem with microphone when plugged to PC front port, Win 7 & Realtek

Reply just to bump it back up and alive.

Read other 1 answers
RELEVANCY SCORE 69.6

I am currently using windows 8.1 on my Dell Inspiron N5010. While the wireless module is working perfectly, the Ethernet port gets frequently disconnected due to unknown reasons. To make it function again, I need to reinstall its drivers every time. Can anyone figure out the cause behind this and solutions if any?

A:Realtek Ethernet port malfunctioning Dell Inspiron N5010

Bad cable, bad Ethernet port, bad router or switch. You can go to Realtek and download the latest driver from them.

Read other 1 answers
RELEVANCY SCORE 69.6

Hi,
Recently, I started getting problems with my audio on my alienware X51 R2 (I'm on windows 10). After a long time of searching for solutions all over the internet like on forums, I've come to the point where the only possible solution to my problem is using the realtek hd audio manager. The problem is: I can't access it on my alienware device since it is completely replaced by your poor version of it "Alienware Audio" wich does not have any of the options I need. How could I restore the original version of this software or at least disable the alienware audio version?

Read other answers
RELEVANCY SCORE 69.6

Hello,

I have Windows 7 Ultimate 64 bit and I have a problem with sound. When I plug my speakers in front panel I have output audio, but in back panel I don't.

My Audio Manager looks like this, but front panel is enabled and back panel is disabled. It does not recognize back (ANALOG) jack.


I tried with settings in this manager but without success, I cheked Control Panel > Sound and followed instructions but still no sound if speakers is in back panel. What to do?

P.S
Sorry for bad english

A:No sound in back audio panel jack - Realtek HD Audio Manager

What is set as the Default Playback Device? If "Digital" or "HDMI" is set as default you will not get any sound from rear audio connections. "Speaker" must be set as Default Playback Device/

Read other 7 answers
RELEVANCY SCORE 68.4

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 68.4

Internet Service Personal Router Static IP MAC address of LAN Port or WAN Port

Hello friends,

I have purchased static IP from Local ISP Provider . Problem is that the tech support of local ISP provider is asking em

Which Port would you like to bind your Static IP

Also they ask me whats the MAC Address of Router
Pls see attached screenshot
As you can see Internet port - 74:44:01:94:E0:79
Whereas LAN Port has mac address - 74:44:01:94:E0:78

Which is routers mac address?

I have no idea.

I know we have two ports in router (mine is Netgear 300N Model)
1. WAN (Internet) Port
2. LAN Port
Could anyone really help in explaining me
1. Which one is routers mac address
2. Static ip should be binded to LAN or WAN Port

Pls guide Thank You

P.S. I intend to use DVR for CCTV for remote viewing later
 

A:Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

I Don't know what your talking about directly but I'm willing to try. Can you explain a little better what the isp person is asking you? From the screenshot I know the bottom section is your local connection and the top part is your WAN connection. If that helps any.
 

Read other 2 answers
RELEVANCY SCORE 68.4

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 68.4

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 68.4

Hello! I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.

I'm trying to forward port 88 on my Linksys WRT54G Version 6

I tried that but Boardwave audio streaming server still says it's not open!

Here are some pictures:

I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
What am i doing wrong?
Thank you for your help!

Windows firewall screenie:

 

A:Solved: Port forwarding issues, Cannot forward port Please help! Linksys WRT54G

Read other 9 answers
RELEVANCY SCORE 68

I contacted Lenovo support today and got NO help in answering my question on this T470 Thinkpad. Is the T470 able to support two external monitors at the same time (one) using the HDMI port, (one) using the USB-c port (connected VIA an HDMI adapter lets say) to two 32" LGMA68HY-P 60HZ ISP LED's ( max res 1920 x 1080) that ARENOT 4K displays!!  Man it was like pulling teeth, upside down, in the dark, getting astraight answer from tech support on the issue. It looks like my Pro Dock will be useless in this application. As soon as I plugged in a VGA monitor the HDMI port died. HELP!!

Read other answers
RELEVANCY SCORE 68

CDMA software requires a COM port to communicate with a cell phone. I'm using HW Virtual Serial Port v3.1.2 (single port, standalone install).

I have a separate modem and router. My Win8.1 PC is hardwired to the modem. Windows firewall is off. Windows Defender is off. Motorola Mobile Drivers Installation 5.9.0 is installed (directly from Moto's website for my phone although Win8 is not listed just Win7. I did not install in Win7 compatibility mode.). My Motorola Droid Razr HD is running stock 4.1.1 ROM. It is booted into BP Tools. WiFi is off. USB Debugging is on. It's connected as MTP (media device). Stay awake is on. Modem, PC, & phone have been rebooted. There are no errors in Device Manager for the Motorola USB Networking Driver.

In IP config, the IPv4 address for the Motorola USB Networking Driver is 192.168.137.1. In HW Virtual Serial Port under Settings tab, I unchecked NVT Enabled. On the Virtual Serial Port tab, I selected Port Name=COM10, IP Address=192.168.137.2, and Port=11008. When I select Create COM, COM10 is created and I can see it in Device Manager but I get a LAN status error (in HW Virtual Serial Port app). So something is not right. In Network & Sharing Center, I see it's an unidentified public network with no internet access (IPv4).

I'm at a loss on how to fix this. Anyone know what I'm missing? Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 68

i have a router/modem, Thomson ST536 and a router, Netgear WNR 1000. i have a static ip address already and port forward for both router with instructions from portforward.com. yet, when i check if the ports are open using simple port forwarding, only the tcp port is opened. the udp port remains closes. is there something else i must do to open the udp port?
 

A:problem with port forwarding. tcp port gets opened but udp remains closed.

bumpz
 

Read other 1 answers
RELEVANCY SCORE 68

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

Read other 1 answers