Over 1 million tech questions and answers.

Jan - June 2008 Update causes BSOD on Restart

Q: Jan - June 2008 Update causes BSOD on Restart

Hello,
I recently purchased a new Seagate 7200RPM 500gb hard drive that I have installed a fresh Dell combo windows Vista Home 32bit. It works perfectly after I installed all my drivers but then I started to do only high priority updates and I did all of 2007 first and then restarted and still worked fine. However then I started to install updates from the first half of 2008 and the latest 3 from 2009. And when they finished I got a BSOD on restart.
Now that I have the story finished let me explain, I have tried to install my OS 5 times and each time it gave me the BSOD on restart only but never on a boot up.
I have the BSOD message which is the common junk for about 10 lines then the actual information of
Stop: 0X0000007B (0x80403BA0, 0xC0000034, 0x00000000, 0x00000000)

I thought it may be the RAM but I have checked that and also done a f/ dskchk or whatever it is called. Neither showed anything.
So if anyone has any information I would love to know.
As well in Device Manager it shows no bad drivers.

RELEVANCY SCORE 200
Preferred Solution: Jan - June 2008 Update causes BSOD on Restart

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Jan - June 2008 Update causes BSOD on Restart

Can you post the .dmp file in C:\Windows or C:\Minidump for analysis in a .zip file, or take a look the guide in my sig.

What do you mean by combo Vista?

Read other 7 answers
RELEVANCY SCORE 55.2

Today June 19 2012 I received this.Did anyone get this also?After Microsoft's service had been cracked by Flame, my trust in Microsoft has dropped to zero.So I would need confirmation if anyone else had thisupdate today (19 June 2012).The interesting thing is, mostly it gives a link forthe update to read more info about a certain update.But here today is no description whatsoever.edit: I should mention the odd thing about this is, I lookedinto my update settings and it was set to automatically installand update windows. So it should have downloaded this and installed.So why the difference?It makes me feel uneasy, to say the least.Advise pleaseThank You

A:Urgent - Windows 7 Update Service Update June 19 2012

I called Microsoft just now.
They established a remote session directly to my PC.
After verification that my OS is legit etc. they had a look at this.

They recommend that I reinstall Windows from one of their ISO images
and not from the HP recovery partition.

The guy said he wouldn't trust that update as there is the information link
missing.

I only can do what he says, downloading that 3 GB ISO and burn the DVD
and reinstall Windows.

So, if you get the SAME looking update, my advise is as his.
Don't install that update.

Read other 7 answers
RELEVANCY SCORE 52.4

I recently built a new PC, initially everything was OK but now I get a number of problem sysmptoms (please see SYMPTOMS below).
It's slightly more complicated than that because the PC switches between Good Mode and Bad Mode.
In Bad Mode I get all the SYMPTOMS but in Good Mode I only get the "Windows Update fails" symptom.
I can see no obvious reason why the PC switches between these two modes.

I've no idea what's going on here so if anybody has any suggestions I'd be very interested to hear them.
SYMPTOMS
1) Shutdown/Restart Freeze
Sometimes selecting Shutdown/Restart (including the "update" variants) starts the blue screen with the marbles rolling round their circular track but after a few seconds the marbles feeze, the cursor/pointer stops responding to mouse movements and nothing happens until either the power or reset button is pressed.
2) Shutdown/Restart BSOD
If the Shutdown/Restart doesn't freeze then it goes on for about five minutes then the un-smily screen appears (BSOD?) with the error message DRIVER_POWER_STATE_FAILURE. Then the PC restarts.
3) Sleep never wakes
When Sleep is selected the PC appears to sleep but does not wake from keyboard or mouse.
4) USB devices not detected
Memory sticks, Cameras, Hubs, Phones, Microscope, nothing is ever detected unless it is plugged in before the PC is started up. By "Not Detected" I mean that when I plug a device in the PC shows absolutely no indication that anything has hap... Read more

Read other answers
RELEVANCY SCORE 52

I understood MS would release a final update in June 2020 before going end-of-support in jan 2020.
But, almost August and no update in sight, according to https://docs.microsoft.com/en-us/advanced-threat-analytics/ata-versions
So, when can we expect this update (if at all)?

Read other answers
RELEVANCY SCORE 52

Update 493 available. Added detection of new virus Worm/Mofeir and new variant of I-Worm/Sobig - I-Worm/Sobig.E.
- June 25, 2003 -
 

A:AVG update 25 June Sobig-E

Kaspersky Labs noted this Sobig worm is new in it's use of zipped files:
Separating Sobig.e from its four predecessors is its use of the Zip file format, what it does after system infection is virtual identical to past Sobig variants. Sobig.e getting around as a Zip file is a significant twist because while company gateways often filter out potentially dangerous file formats such as .exe, .vbs and .scr files, the .zip format is rarely scrutinized by businesses. Indeed past Sobig variants would have usually never made it past company gateways.
 

Read other 1 answers
RELEVANCY SCORE 52

Version 1.98. is released today.

Open hijack, click config/ miscellaneous tools/ webupdate.
 

A:Hijack this update June 29

thanks mobo just grabbed it
 

Read other 1 answers
RELEVANCY SCORE 52

I just saw this after checking for updates.

Looks like one of them is to address the long scan time for updates on "some" computers.

Read other answers
RELEVANCY SCORE 52

another update issued today from lavasoft.
 

A:Adaware update june 12

Read other 7 answers
RELEVANCY SCORE 51.6

Hiya

When you install this update, you are enabling Microsoft Word 2002 to connect to translation services provided by Bowne Global Solutions. Translation can be performed between English, French, German, Italian, Portuguese, and Spanish. These services use computers to translate your document automatically. You can often use these translations to quickly determine the main ideas in a document.
For important or sensitive documents, a professional translator can give you the most reliable results, since computer translation may not preserve the text's full meaning, detail, or tone. Professional translation is offered via a link on the page that displays machine translation results.

Note These translation services work with Word 2002 installations only.
http://office.microsoft.com/downloa...aseID=40198&area=search&ordinal=4&redirect=no

Regards

eddie
 

Read other answers
RELEVANCY SCORE 51.6

Hiya

The Microsoft Outlook® 2002 Update: June 21, 2001 provides you with the highest levels of performance and stability available for Outlook 2002. This update increases performance when using Outlook 2002 with Instant Messaging integration or running on a Microsoft Exchange Server. This update is part of Microsoft's continued effort to provide the latest product updates to customers.

http://office.microsoft.com/downloa...loads/release.asp?ReleaseID=30143&redirect=no

Regards

eddie
 

Read other answers
RELEVANCY SCORE 51.6

Good morning.
 
Not sure if there's an issue or not but wanted to post since I didn't see any other Member's had posted anything similar with the latest Java Update.
 
Both me and the wife got the prompt to update Java; she got hers last night  and I got mine this morning.
 
We're both running Windows 7 and we both have disable Java content in our browsers anyway but we like to stay updated and/or patched, so we downloaded the latest offering  (and declined the Free McAfee Security Scan, thank you very much )  and just as it appeared to complete the process, we both received this pop up:
 
[/URL]">http://
 
 
 
Sorry about the pic size...still haven't *quite* figured out the best way to insert a pic in these Forums.
 
So I did a quick check on both our machines and we're both running Version 7 Update 25, which appears to be the latest, according to the Test Java version via the Java website...but it also shows that it was installed on March 18th of this year.
 
So I Googled the main phrase of the pop up but that only lead me to any number of technical articles that were  way  beyond my pay grade.
 
Also, in our Control Panel, it shows the Java version to be 32-bit although both our machines are 64-bit. 
 
 
 
So, is something amiss?
 
Should I uninstall both versions and reinstall only the 64 bit versions?
 
Should I curse the names of all who work at Oracle?
 
... Read more

A:Java Update June 2013

You may still have the Update item checked from a previous install -
 
Java 7 Update 25 has been released -

Read other 3 answers
RELEVANCY SCORE 50.8

Hiya

The Microsoft Office XP Clip Organizer Update: June 19, 2002 includes several stability and performance fixes for Microsoft Office XP. It offers you the highest levels of performance and security available for Microsoft Office. This update is part of Microsoft's continued effort to provide the latest product updates to customers.

http://office.microsoft.com/downloa...aseID=39481&area=search&ordinal=9&redirect=no

Regards

eddie
 

Read other answers
RELEVANCY SCORE 50.8

O.k. I have Windows 7 Professional x64 and you can see my specs in the specs list. I am trying to install the latest drivers for directx from the windows site but am having no luck. I tried the Feb 2010 as well as the Jun 2010 end user, sdk, and webinstallers with no luck. I get an error saying the cabinet file can't be trusted, check if encryption services are running and verify the certificate. I checked to make sure that encryption services were running and they are. I have changed a few things in the services and was wondering if there is something I should check and see if running. Any help in this would be awesome.

A:Need to update my DirectX drivers to the June 2010

I'm assuming you're attempting to install from an admin account? Try this, download the complete installer:

DirectX 9.0c

Right click on exe and click on Run as Administrator. See if that doesn't work.

A Guy

Read other 6 answers
RELEVANCY SCORE 50.8

Hi,

I have just installed the latest June update but to my horror it has wiped out all my personal data.

Such as licence files, desktop icons, passwords and saved login details etc.

I cannot even restore from a backup as the Diskeeper archives do not recognise the backups.

Can anyone please help as I need ny data back...

Martin

A:June update caues a loss of data.

This is almost certainly co-incidental - no update could possibly do what you claim.

It sounds as if you have booted to a new User Profile?

Read other 3 answers
RELEVANCY SCORE 50.8

Symptom:
===========================
Consider the following scenario:
 

You are using .NET Framework 4.6 or a later version on Windows 8.1, Windows Server 2012, or Windows Server 2012 R2.You previously installed the June 2018 Preview of Quality update KB4291497 or KB4291495You try to install the July 2018 Security and Quality Rollup updates KB4340557 or KB4340558.
 
In this scenario, the update doesn't install, and you receive a "0x80092004" installation error message.
 
Workaround:
===========================
 
To work around this problem, use one of the following methods.
 

Workaround 1
To immediately bring affected systems up-to-date for the security fixes that are included in the July .NET Security and Quality Rollup updates KB
4340005 or KB
4340006:

 
 

Workaround 2
Uninstall the June 2018 Preview of Quality Rollup updates KB 4291497 or KB 4291495, run the DISM cleanup tool, and then reinstall the July 2018 Security and Quality Rollup updates KB
4340557 or KB
4340558, as appropriate.
 
Detailed information, please refer to this KB article.
https://support.microsoft.com/en-us/help/4345232/0x80092004-error-and-updates-kb4340557-and-kb4340558-don-t-install-aft

Please remember to mark the replies as answers if they help.
If you have feedback for TechNet Subscriber Support, contact
[email protected]

Read other answers
RELEVANCY SCORE 50.8

G'day All,

First post here - been having this problem for a few months now - developed a work around, but it's starting to get under my skin now.. Mainly because the system does it's updates at night, which means that my PC stays on (after BSOD) and usually keeps the screen on as well, which wakes me up eventually, or keeps the house hot (who cares, anyway.)

I've been reading the forums & trying to work it out myself, except the error code changes depending on what I'm doing..

I've attached the current BSOD grab, hopefully it gives enough information, and I've run the FurMark - and the display driver crashed (as usual - I'm starting to think it might be a faulty Graphics card..)

Enough of my chatter - let me know if it's something simple

A:Constant BSOD on Windows update, or System Restart (Or wake from sleep

1, One of the BSODs are caused by OC, stop overlocking the CPU or at least lower the frequency until the system becomes stable

BugCheck 124, {0, fffffa800c55a028, be000000, 800400}

Error : Internal timer (Proc 1 Bank 5)

[CPU Information]
~MHz = REG_DWORD 4217
Component Information = REG_BINARY 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Configuration Data = REG_FULL_RESOURCE_DESCRIPTOR ff,ff,ff,ff,ff,ff,ff,ff,0,0,0,0,0,0,0,0
Identifier = REG_SZ Intel64 Family 6 Model 26 Stepping 5
ProcessorNameString = REG_SZ Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz
Update Signature = REG_BINARY 0,0,0,0,11,0,0,0
Update Status = REG_DWORD 0
VendorIdentifier = REG_SZ GenuineIntel
MSR8B = REG_QWORD 1100000000

Processor may be overclocked!
Expected Frequency: 3200
Actual Frequency: 4217
Overclock Ratio: 1.31

2, Uninstall Daemon Tools and make sure you get rid off the SCSI Pass Through Direct (SPTD) driver.

3, Uninstall or upgrade Hamachi

4, Update the following drivers:

Marvell 91xx SATA 6G Controller
fffff880`01000000 fffff880`0108c000 mv91xx Fri Dec 25 07:45:39 2009 (4B345F93)

Marvell RAID Console
fffff880`0112c000 fffff880`0114c000 jraid Thu Oct 29 09:14:20 2009 (4AE94EDC)

Intel(R) ICH10R SATA AHCI Controller
fffff880`01287000 fffff880`013a3000 iaStor Tue Feb 09 01:11:06 2010 (4B70A81A)

ASUS Xonar Essence STX Audio Device
fffff880`07830000 fffff880`079f5000 cmudaxp Thu Oct 28 10:27:22 2010 (4CC933EA)

Saitek Magic Bus driver
fffff880`07d01000 ... Read more

Read other 1 answers
RELEVANCY SCORE 50.4

Today's the day! The BIOS's have been tested and set for release! (That's good!)But they will not be available in a Softpaq form until next week. (That's bad.)But I have a copy of them and have put them on an FTP site for all of my friends! (That's good!)But the yougert is also cursed. (Can I go now?)Below is an updated list of key drivers, et al. (Items in Green are new.)You must have all of these updated drivers as well as this new BIOS to making things as "sunshiny and rainbows" as possible.  (Remebmer to always use the Softpaq Download Manager to ensure everything is up to date.) Component NameCategory on Product Support Page on hp.comSoftpaq #VersionBIOS - Zbook 15/17(BIOS) 1.09BIOS - Zbook Studio(BIOS) 1.11Intel Thunderbolt Secure Connect Software(Driver - Controller)sp7614315.3.40.275Intel® Thunderbolt? Firmware Update Utility(Firmware)SP7493516.1.7.0.6 - It will still show up as .3 in the TB software. This is being fixed.Intel Graphics Driver(Driver - Graphics)SP7598420.19.15.4444NVIDIA Graphics Driver(Driver - Graphics - Nvidia)SP76218354.9ASMedia eXtensible Host Controller Driver(Driver - Chipset)SP76277 1.16.35.1Broadcom NetXtreme Gigabit Ethernet Controller Driver(Driver - Network)sp7608017.4.0.1 Conexant Audio USB Driver (called HP Dock Audio in Device Manager)(Driver - Audio)SP741461.31.36.13Conexant USB Audio Driver for Docks(Driver - Audio)sp74876 1.31.36.14 IMPORTANT!Now, before I post the link, there is somethi... Read more

Read other answers
RELEVANCY SCORE 50.4

What is the verdict on MSKB3161608 - June 2016 update rollup for Windows 7 SP1 and Windows Server 2008 R2 SP1?

I see that MSKB3161608 includes quite a few patches, including MSKB3161647 - Windows Update Client for Windows 7 and Windows Server 2008 R2: June 2016. In the past, I think some people mentioned MS possibly slipping in some Win10 crap with patches to the Windows Update Client.

For Windows 7 SP1 systems that will not be "upgraded" to Windows 10, does MSKB3161608 (or MSKB3161647) include any nasties, Win10 garbage, or MS-suprises?

For Windows 7 SP1 systems that will not be "upgraded" to Windows 10, is MSKB3161608 a recommended install?

A:What is the verdict on MSKB3161608 - June 2016 update rollup?

Hi SevenOfNine

(So, you are referring to Star Trek Voyager)

Actually, you still can upgraded to Windows 10 as this will end on July 2016, as announce.
I refuse to install, as i am used to Windows 7.

I think you can do it, because it keep showing when going to MSN website.
Try it, as it may works.

Sometimes i don't understand why people so like to do update this patch that so on....
When it is good and ready, Windows update will push to your pc, definitely.
You can go > Start --> Windows update, then it pop-up to remind to upgrade to Windows 10 (was downloaded into my pc.)

Read other 8 answers
RELEVANCY SCORE 50.4

Hiya

The Microsoft Office 2000 Clip Gallery Update: June 19, 2002 includes several stability and performance fixes for Office 2000. It offers you the highest levels of performance and security available for Microsoft Office 2000. This update is part of Microsoft's continued effort to provide the latest product updates to customers.

http://office.microsoft.com/downloa...aseID=39492&area=search&ordinal=8&redirect=no

Regards

eddie
 

Read other answers
RELEVANCY SCORE 50.4

Hiya

Download the construction update to keep your maps current in Streets & Trips 2003

System Requirements
Supported Operating Systems: Windows 2000, Windows 95, Windows 98, Windows NT, Windows XP
http://www.microsoft.com/downloads/...09-1264-420c-a85c-e321b4bcaaba&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 50.4

I did a restart, logged in and screen remained blank. I tried to restart several times and had the same problem. Finally I did a system restore and booted okay. I then deleted all files and folders in Windows/SoftwareDistribution and changed the windows update setting to not check for updates because I didn't want the update to apply after any restarts. How should I go about fixing the problem so I can get and install updates. Any help would be appreciated and sorry for being long-winded.

A:June Windows 8.1 update caused desktop not to display

I have the exact same problem after installing the updates. I noticed that explorer.exe didn't start on my computer. If I start it manually it does show up in de task manager but nothing else happens.
Edit: I've added a screenshot of the updates.

Edit2: I have installed all the updates except for KB2969339 on a different windows and I didn't experience any problems. So KB2969339 seems to be the one causing all the trouble. You can rightclick on the update in the update list and click hide to hide it so you never accidentally install it again. However, I don't know anything about computers so I don't know if doing that will cause more problems later on.

Read other 2 answers
RELEVANCY SCORE 50.4

This June 2016 cumulative update for Windows 10 computers changes it to version 1511 10586.420

Here is its changelog:

(Click each image to enlarge and view)

---------------------------------------------------------------

It also updates Internet Explorer to version 11.0.32

---------------------------------------------------------------
 

Read other answers
RELEVANCY SCORE 50

Hi,

The server has windows 2008 and suddenly it started to restart every few hours. The reason seems as fatal exception.
Attached please find Echo zip file and health check and autorun zip file.

I see in the health check that it says windows cannot find anti-spyware program. On the server installed NOD 32 anti virus.

? OS - Vista/ Windows 7 ? Windows server standard, 32bit
? What was original installed OS on system? Windows server standard
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? full retail
? Age of system (hardware) around 6 years
? Age of OS installation - have you re-installed the OS? around 4 years
? CPU - 2 X Processor Intel(R) Xeon(TM) CPU 3.20GHz, 3200 Mhz, 1 Core(s), 2 Logical Processor(s)
? Video Card - Standard VGA
? MotherBoard - HP
? System Manufacturer - HP
? Exact model number (if laptop, check label on bottom) - HP ProLiant DL360 G4p

Thank you for your help !

A:Windows 2008 restart because of exception

This bugcheck indicates a system thread generated an exception which was unexpected and therefore wasn't able to resolved.


Code:
BugCheck 1000008E, {c0000005, 936cf22f, 92ed211c, 0}
The cause is from an access violation where memory was referenced which couldn't be addressed.


Code:
3: kd> .trap 92ed211c
ErrCode = 00000000
eax=8b04c910 ebx=00000005 ecx=8b04c924 edx=00000000 esi=921d0ae3 edi=95466398
eip=936cf22f esp=92ed2190 ebp=92ed2198 iopl=0 nv up ei ng nz na po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010282
RDPWD!SListRemove+0x5d:
936cf22f 8b3cf1 mov edi,dword ptr [ecx+esi*8] ds:0023: 1bed203c=????????
A pointer was stored in 1bed203c by dereferencing edi (grabbing the data and moving it) then storing it in that address by calculating ecx+esi multiplied by eight.
We can't see whether or not it's a valid address as the page table entries haven't been stored.


Code:
3: kd> !pte 1bed203c
VA 1bed203c
PDE at C03001BC PTE at C006FB48
Unable to get PDE C03001BC
The faulting function RDPWD!SListRemove+0x5d is always the cause, it's undocumented but I suspect it involves removing an entry in a singly linked list for a network related device.

I suggest enabling Driver Verifier as it seems a driver is the cause.

What is Driver Verifier?

Driver Verifier monitors Windows kernel-mode drivers, graphics drivers, and even 3rd party drivers to detect illegal ... Read more

Read other 2 answers
RELEVANCY SCORE 50

Microsoft hasn't even released Windows 10 to the general public yet, and the company is already talking about updates. According to a report from Neowin, Microsoft is preparing a series of updates codenamed 'Redstone' that will hit various devices in...

Read more
 

A:Microsoft's Redstone update coming in June and October 2016

Please don't pull a, "it's windows 8... now it's windows 8.1"

Make it Windows 10, update windows 10, and when that is done have windows 11.

That would conform with the whole windows thing..
 

Read other 12 answers
RELEVANCY SCORE 50

I have posted this other places, but thought I would try here as well.  This behavior started after last week's Windows update was installed.  I searched this forum for "print" and "bing maps" and have not gotten any matches
since the last update.  If I try to print Bing maps in IE 11, it doesn't work.  To duplicate go to any Bing map, hit print from the drop-down menu.  The select a printer dialogue box appears and then you get the following error (localized to
your account on your machine): 


Bill

Read other answers
RELEVANCY SCORE 50

Today i did received through Windows Update, two optional updates.

One is for Intel processors.

-Article ID: 3064209 - Last Review: June 16, 2015 - Revision: 1.0
June 2015 microcode update for Intel processors in Windows

About this update:
This article describes a microcode update for Intel processors that are running Windows 8.1, Windows Server 2012 R2, Windows 8, Windows Server 2012, Windows 7 Service Pack 1 (SP1), or Windows Server 2008 R2 SP1.
This update improves the reliability of systems that use certain Intel processors. This update also fixes some issues that could cause the operating system to function incorrectly.
https://support.microsoft.com/fr-fr/kb/3064209/en-us


Did the Intel Microcode Update Revision number for Ivy bridge was "17" before?

I can't recall properly as now it shows: Microcode Update Revision "1B"...



The other one for language pack: https://support.microsoft.com/fr-fr/kb/3040272/en-us

A:June 2015 microcode update for Intel processors in Windows

I just checked updates and nothing for my i7 3770.

Read other 9 answers
RELEVANCY SCORE 50

Hi,
Download links were dead so check back later,

I have uploaded the 2 required updates to my OneDrive KB3020369 & KB3172605 both 32 and 64 bit for each
https://1drv.ms/f/s!AsjD7o6P3KLKj2TjShn8-SumV1rr

https://support.microsoft.com/en-us/kb/3172605

Win-7 32 bit,
https://www.microsoft.com/en-us/down....aspx?id=53335
Win-7 64 bit,
https://www.microsoft.com/en-us/down....aspx?id=53332







Quote:
The July 2016 update rollup includes some new improvements and fixes including the improvements from June 2016 update roll up KB3161608 for the Windows 7 SP1 and 2008 R2 SP1 platform. We recommend that you apply this update rollup as part of your regular maintenance routines.


The catalog download works though
You do have to use Internet explorer to download from the catalog,
KB3172605
Microsoft Update Catalog

A:July update rollup KB3172605 to replace June's KB3161608

Looks like they added a Known issue to the link





Quote:
Known issues in this update

Issue 1

Symptom
After you install KB 3133977, the software for Intel Bluetooth devices may not be fully functional because of existing software issues in the Intel Bluetooth driver software. These issues may affect Bluetooth keyboards, mice, audio streaming devices, and voice headsets. You may also not be able to pair new Bluetooth devices. Intel is currently working on an update to address their software incompatibilities.

Workaround
If you require Intel Bluetooth support on Windows 7 before the revised software is available, the only known workaround at this time is to uninstall this update temporarily and then reinstall it after Intel has updated their software.

Read other 3 answers
RELEVANCY SCORE 50

Improvements and Fixes for Windows 10 v1703

This non-security update includes quality improvements. No new operating system features are being introduced in this update. See all the improvements and fixes here

https://support.Microsoft.com/en-us/help/4022716/Windows-10-update-kb4022716
 

A:Windows 10 Update: June 27, 2017—KB4022716 (OS Build 15063.447)

Today isn't Patch Tuesday, but Microsoft still released cumulative updates for all versions of Windows 10. The firm seems to be doing it twice a month now, as the last set of builds arrived on June 13.

As usual, there are no new front-facing features. Instead, all of these updates focus on various fixes.

If you're on the Creators Update, you'll see build 15063.447, or KB4022716. You can download it from the Microsoft Update Catalog here.
This is what got fixed:
Addressed an issue introduced by KB4022725 where Internet Explorer and Microsoft Edge printing from a frame may result in 404 not found or blank page printed.
Addressed issue where network printers may fail to install when using the printer vendor?s setup software on machines with less than 4 GB of RAM. These printers will install properly if you install using the Settings app or from Devices and Printers in Control Panel.
Addressed issue that causes high memory usage for the Camera app on mobile platforms, which reduces battery life. Any app that uses a media capture element (MCE) or media element (ME) and plays 1080p will consume a lot of power, which will significantly reduce battery life.
Addressed issue where, after updating to the Creators Update, devices that have Receive Segment Coalescing (RSC) enabled have significantly low wireless throughput.
Addressed issue (Error 0x7F) with Windows Forms (WinForms) that causes the system to crash after upgrading to the Creators Update.
Addressed issue... Read more

Read other 1 answers
RELEVANCY SCORE 50

I have a Dell Inspiron with a Core i5 CPU.

I am running Windows 7 Home - 64 bit.

I have McAfee Anti-Virus Software.

My computer has 2 issues that appeared after a Windows update.

My IE 10 will not start. It flashes a Screen momentarily and shuts down.

Second issue - can not shutdown computer. Restarts when I try to shutdown.

Don't know if issue is Windows update or something else.

Device drivers appear to be OK.

Any suggestions?

Thanks

A:2 things happened after Windows update 2 on June 10th, 2013

Welcome to Sevenforums,

Maybe first, see to uninstall the IE10 updates kb2838727 & kb2859903 from the Programs & Features => show installed updates.

Try uninstall the flash player (see if it works after), then updating flash player to v 11.7.700.224 to the latest.

You could also run the System Update Readiness Tool

Read other 9 answers
RELEVANCY SCORE 49.2

After installing KB3161949 on Windows 7 and 8.1 Professional, mapped network file shares become unavailable (red x). Shares are only accessible via IP or FQDN. Uninstalling the update restores access. Microsoft needs to pull this update!

Read other answers
RELEVANCY SCORE 49.2

Hello folks,

I need to have installed Office 2010 Cumulative Update for June 2011 as it's listed as a prerequisite for another software. However, I can not find this update in Windows Update (neither in downloads list nor in installed updates list).

Is there a way to install the update manually? And if it is, where can I find this particular update?

A:Office 2010 June 2011 Cumulative Update - Where to find/how to install

Do you which KB number is required? Try this:

Download Update for Microsoft Office 2010 (KB2515417) from Official Microsoft Download Centre

Read other 1 answers
RELEVANCY SCORE 49.2

After installing KB3161949 on Windows 7 and 8.1 Professional, mapped network file shares become unavailable (red x). This seems to be an issue when the systems reside on separate networks (like Public/Private) Shares are only accessible via IP or FQDN.
Uninstalling the update restores access. Microsoft needs to pull this update!

Read other answers
RELEVANCY SCORE 49.2

Hiya

The Nimda virus has been detected within one of the compressed help files included in the Korean language version of Application Center Test (ACT). ACT is a component of the Korean language versions of the Visual Studio .NET.

In all analyzed scenarios, Microsoft considers the likelihood of activating the virus to be extremely low, if not impossible.

Microsoft has released an update that eliminates the infected files from an existing installation of (Korean) Visual Studio .NET.

System Requirements

Any one of these Korean releases:

Visual Studio .NET Enterprise Architect, Visual Studio .NET Enterprise Developer, Visual Studio .NET Professional, and Standard editions of all Microsoft developer tools, including Visual Basic .NET, Visual C++ .NET, and Visual C# .NET.

Operating System - Windows NT 4.0 & 2000, Win XP

http://www.microsoft.com/downloads/release.asp?ReleaseID=39788&area=search&ordinal=4

Regards

eddie
 

Read other answers
RELEVANCY SCORE 49.2

After installing KB3161949 on Windows 7 and 8.1 Professional, mapped network file shares become unavailable (red x). This seems to be an issue when the systems reside on separate networks (like Public/Private) Shares are only accessible via IP or FQDN.
Uninstalling the update restores access. Microsoft needs to pull this update!

Read other answers
RELEVANCY SCORE 48.8

http://www.oracle.com/technetwork/topics/security/javacpujune2011-313339.htmlThis Critical Patch Update Pre-Release Announcement provides advance information about the Oracle Java SE Critical Patch Update for June 2011, which will be released on Tuesday, June 7, 2011. While this Pre-Release Announcement is as accurate as possible at the time of publication, the information it contains may change before publication of the Critical Patch Update Advisory. This Critical Patch Update is a collection of patches for multiple security vulnerabilities in Oracle Java SE. This Critical Patch Update contains 17 new security vulnerability fixes. Due to the threat posed by a successful attack, Oracle strongly recommends that customers apply Critical Patch Update fixes as soon as possible.

A:Oracle Java SE Critical Patch Update Pre-Release Announcement - June 2011

(Update contains 17 new security vulnerability) That's a lot of security problems. I will make sure I get that one.Thanks Union Thug!!

Read other 2 answers
RELEVANCY SCORE 48.8

Reinstalled operating system using Vista Ultimate.  After Service Pack 2 is installed, I am no longer able to get Windows Updates.  Internet Explorer 9 was installed June 2016.  Is there a fix to this problem?  Thanks.

Read other answers
RELEVANCY SCORE 48.8

Hello,
Luca here. Basically I have been encountering 4 BSODs with different codes after I installed some Windows 7 updates on June the 15th. I ran various tests (Prime 95, Memtest, a native window ram test and an HP System check upon booting) all of the were negative (no errors encountered). One of the BSODs popped up while I was running an instance of Memtest, unfortunately I did not track down the STOP code. They seem to pop up at random times, while I'm doing very different activities. THe first one came up while I was watching a youtube video, the others I have encountered while leaving the PC on but not using it. Also yesterday the PC seemed to not be able to pass POST, so I wasn't able to turn it on for a good 3 hours, then It started working again. Throwing this in there, maybe it will give you guys some insight on what my problem may be.
I'm attaching a RAR of the 4 crash dumps.
Thanks in advance to whoever will take the time to reach out and help

My system specs are:

Model : HP m9292.it
CPU : Intel Core2 Quad Q9300 2.50 GHz
RAM : 8 GB DDR2 400 MHz Corsair RAM
Motherboard: Pegatron Benicia Motherboard
GPU : AMD Radeon HD 7700 Sapphire 1 GB
Drives : 2 Seagate ST3750640AS 750 GB

A:BSOD after Windows 7 updates June 15th

I would first try seeing if you can re run memtest again and try and note the stop error code; cause it sounds like you MAY have one or more bad sticks of ram due to the fact that its popping a bsod on ya while trying to run memtest.

Read other 9 answers
RELEVANCY SCORE 48.4

Hi,

I haven?t seen anyone with this specific problem, but apologies if I have missed this.

I believe my laptop has been infected with the ?Virus Remover 2008? virus. I?ve read allot over the last few hours about running anti-virus software, Malwarebyte or manually deleting files, but what I cannot find is my specific problem amongst all the forum?s.

Every time I start the laptop up, I login, get to the desktop, the icons load on screen, they load in the bottom right bar. This is when I get a blue screen, then white lines (looks like barcodes), then the laptop restarts again. There is no time to run any anti-virus software or enter any of the menus (it happens about 10 secs after the last icon is loaded). I?m going round in circles with this one.

Can anyone help with this problem? Much appreciated if you can.

Laptop: Dell Inspirion 1501 with Vista.

Cheers
Nate19

A:"Virus Remover 2008" Blue Screen leads to Restart

Can you get into Safemode? Reboot the computer and after the initial screen, start tapping the F8 key

Read other 3 answers
RELEVANCY SCORE 48.4

The subject really says it all. I'll be using my laptop in the morning before work, and when I attempt to use it later in the day after starting it back up, the mouse cursor is missing and touchpad does not work. During this time, my USB mouse works fine. Then, if I run windows update, and then restart, the touchpad is fully functional again. I've attempted updating all software/hardware with no improvement. Hopefully someone can help, because it is one of the more annoying computer issues I've ever faced.

Read other answers
RELEVANCY SCORE 48.4

I have to update my Vaio Update software (version 3) to version 4. The instructions on the Sony website say:

1. Download the file to a temporary or download directory (Please note this directory for reference later).
2. Uninstall the existing VAIO Update and restart the unit.
3. After the unit has restarted, please go to the directory where the file was downloaded and double-click EP0000162589.exe.
4. Follow the instructions displayed in the installation wizard.
5. After installation is completed, please restart the computer.

All is clear to me, except that I don't know whether "unit" is another word for "computer", or something different altogether...? If they mean the same thing, then the same word should be used. Anyway, I don't know whether I have to reboot my computer after removing Vaio Update 3 or whether I can install version 4 directly after removing version 3. Sorry if this sounds silly.
 

A:Solved: Restart the unit=restart the computer? Didn't understand Vaio Update instruct

ok download the file to for example my docs next uninstall version3 and restart your comp next get the file from my docs double click the exe follow the wizard instructions when finished restart again hope this helps
 

Read other 3 answers
RELEVANCY SCORE 48

I have a Dell XPS 15 9550 and all of a sudden I have been getting a BSOD constantly. It can be when I'm using Excel, Web Browsing, or even when I have the computer sitting on my desk doing nothing.
I turned off the feature to do an auto restart after it never created a record or log of the issue.
I got "Stop Code: UNEXPECTED_STORE_EXCEPTION"
This computer came with Windows 10 installed by Dell so this isn't in relation to an upgrade from 8 to 10.
The Event Viewer only lists "Event ID 41 Kernel-Power Task Category 63"
I'm at a loss as to what is going on and having this laptop being barely over a year old it's nuts to have a 1600+ paperweight.
Hopefully someone has some thought or etc for me.
 

A:Constant BSOD since June 3rd, 2017 (No program or particular act triggers it)

On June 3rd or just prior to that date, did you get any type of updates or install any new apps?
Have you checked you drivers to make sure they are up to date?
Although the utility to check dump files doesn't work correctly right now, if you could place one or more of your dump files on OneDrive and give us a link, we could try to check it.  You may have a Memory.dmp file if you have not adjusted your system for smaller versions or a mini-dump folder which will contain the smaller versions.
There is a small possibility a new Windows update will be available today which may help.

Read other 2 answers
RELEVANCY SCORE 46.4

Hello.
Usually I use Linux (because its faster easier more secure and just better) but in the past week I have had to install Windows XP pro sp2 on a seperate hard disk for remote desktop connectivity with the Windows system at work.
Installation wouldn't work for whatever reason, so I had to install win2000. I thought I would keep that on, but unfortunatly updates would not work at all. So I then relatively painlessly updated to XP and installed SP2. From there it was working, and everything about it worked (apart from in games I get odd white lines on textures, but thats probably for another thread). After installing all the latest updates, graphics drivers etc I put steam on for some games (mainly cs). During the games occasionally it would freeze the game and lock up the system and if left long enough would bluescreen, say something about nv4_disp.dll and dump my physical memory to disk or something.
Now whenever I try to boot (into any one of the options on the safe mode menu thing) it loads, flashes a BSOD and then restarts.
If anyone can offer any help I would be very grateful.
Cheers, Lee.
 

A:BSOD, restart, BSOD, restart - constant cycle

It's the Nvidia drivers that caused this. Find your windows XP cd and boot from it - go to the recovery console and type chkdsk /r. It might fix it so you can boot - if you can log on afterwards, immediately uninstall the nvidia drivers.
 

Read other 2 answers
RELEVANCY SCORE 45.6

While I was away I let vidoe play on my monitors and when I came back My PC restarted and my usb key board and mouse did not work. Luckly I have a PS/2 key board connected to my PC for such an emergency. Then from their I shut down the PC but I did a restart and during the shut down phase It gave me a BSOD.
The restart reinitialized both my keyboard and mouse. And when my PC started back up after proper shut down and I let it set for a while it gave me this.


Code:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: fe
BCP1: 0000000000000008
BCP2: 0000000000000006
BCP3: 0000000000000006
BCP4: FFFFFA800DEBE000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\051213-66830-01.dmp
C:\Users\MainPC\AppData\Local\Temp\WER-74069-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Code:
http://rapidgator.net/file/7eb861ab7cd9f4219d03aa2a306d2bb0/051213-66830-01.dmp.html
http://rapidgator.net/file/4e89a5b434322c80f6de3c64a5f1d166/WER-74069-0.sysdata.xml.html
This is my first post I hope I followed the proper procedure.

According to the Blue Screen of Death (BSOD) ... Read more

A:Keyborad and Mouse did fuction after restart BSOD during next Restart

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 45.6

Some news for Windows 7 SP1!!
MS has released the Windows 7 SP1 June 2016 Update Rollup
Microsoft Releases the June 2016 Update Rollup for Windows 7 SP1

This also includes a fix for the extremely slow Windows 7 Update (KB3161647) ...finally
Microsoft Finally Fixes the Painfully Slow Windows Update on Windows 7
 

Read other answers
RELEVANCY SCORE 45.2

Hiya

Download the construction update to keep your maps current in Microsoft MapPoint 2001 and Streets & Trips 2001.

System Requirements
Supported Operating Systems: Windows 2000, Windows 95, Windows 98, Windows NT
http://www.microsoft.com/downloads/...84-2445-498d-bd97-5adf06f36106&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 45.2

Hiya

Update your maps today

System Requirements
Supported Operating Systems: Windows 2000, Windows 98, Windows ME, Windows NT
http://www.microsoft.com/downloads/...2e-592f-4472-a6bc-22f1b0f8c39f&DisplayLang=en

Regards

eddie
 

Read other answers