Over 1 million tech questions and answers.

Cisco 2800 Failover

Q: Cisco 2800 Failover

I am new to all of this, I have been thrust into a situation where I need to figure this out.

We have a 2800 connected to a microwave transceiver (our main uber fast connection) and a T1 via ADC Kentrox Data Smart Max T1 (our backup connection)

This is what I walked in to.

What we/I would like to do:
-continue using the MW as our main connection
-use the T1 as an automatic failover if the MW fails due to weather or other event.
-if possible, I would like to take the T1 directly to the Cisco 2800 bypassing other external equipment.

I believe we intend to drop our current provider.

Additional complication:
We are hosting our own website and customer services via the web via this connection, if failover occurs how can we assure that traffic still finds its way to us?

With all of that said, what do we need to do?

I know this is a huge issue and I hope I can look to this forum for guidance on these issues.

RELEVANCY SCORE 200
Preferred Solution: Cisco 2800 Failover

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Cisco 2800 Failover

I have a 2801 chassis and I have a 2 port e1/t1 wic. So you would just need to purchase the a new card.

Next you need to re do your config.

You need to configure HSRP

http://www.cisco.com/en/US/tech/tk648/tk362/tk321/tsd_technology_support_sub-protocol_home.html

Read other 3 answers
RELEVANCY SCORE 77.2

I am looking to design an active/standby failover but am wondering if to get clients to access the VPN you would need to have more than 2 usable IPs from an ISP? For example. the ISP inside interface will have public ip 1, the primary asa will have public ip 2, and the secondary ip will have public ip 3.

I basically want to the know the best way to design a network with 2 internal networks using active/standby failover.
 

A:Cisco ASA Failover Question

Read other 7 answers
RELEVANCY SCORE 71.6

I programmed the cisco 2800 as a gateway and I can ping outside from my router just fine and also the internal network can access the internet using my cisco router just perfect. The only problem is that I cannot telnet/ssh/ping my router from the outside to its public ip. Ping/SSH/Telnet from internal network to the router works just fine. I can also ping the cisco external IP from our internal network.

Please help!

interface FastEthernet0/0
description LAN
ip address 192.168.100.254 255.255.255.0
ip nat inside
ip nat enable
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
!
interface FastEthernet0/1
description WAN
ip address xx.xx.xx.xx 255.255.255.0
ip nat outside
ip nat enable
ip virtual-reassembly
speed 100
full-duplex
no cdp enable
!
ip default-gateway xx.xx.xx.xx
ip route 0.0.0.0 0.0.0.0 xx.xx.xx.xy
!
!
ip http server
ip http authentication local
ip http secure-server
ip dns server
ip nat pool pool1 xx.xx.xx.xx xx.xx.xx.xx netmask 255.255.255.248
 

A:Cisco 2800 access from outside

Read other 9 answers
RELEVANCY SCORE 69.2

I have two routers 2600 series and 2800 series. Also, i have 2 WIC-1DSU-T1 cards (V1 not V2). (WIC-1DSU-T1 will be referred to as a t1 card from now on). I have installed a used, known good, t1 card into the 2800 router. Once the router was fully up i did not have an expected AL (alarm i guess) light on as i expected but, actually NO lights at all. When doing a "show interfaces" the t1 is NOT listed.

Can someone please help me figure this issue out?
If you need or want any information please ask.

Thanks in advanced!!!

Show version output:
Cisco 2811 (revision 53.50) with 249856K/12288K bytes of memory.
Processor board ID FTX1021A2ZP
2 FastEthernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102
 

A:Solved: Cisco 2800 not recognizing WIC-1DSU-T1 card

Read other 7 answers
RELEVANCY SCORE 68

Hi guys,I?m writing to you if you have advice for a weird problem I have here with a bunch of new Lenovo Yoga P40 (with wireless card Intel 8260NGW) working on wireless.This is the problem:When the computers join an access point Cisco 1040 and radio 801.11bn, no problem: download fast (30/50 Mbps), upload fast (50 Mbps)When the computers join an access point Cisco 2800, the radio move to 801.11ac: download slow (0.5 Mbps), upload fast (50 Mbps)I forced the wireless card to radio 801.11bc: download slow (0.5 Mbps), upload fast (50 Mbps)I tried dozen of advice from forum and website in internet, changing wireless card settings, removing app: download slow (0.5 Mbps), upload fast (50 Mbps)I tried to change the wireless card with an Intel 7265NGW, nothing betterI updated the controller to IOS 8.4.100.0, nothing betterI reset Windows 10, nothing betterI installed Wndows 10 by scratch, all fixedHave you ever seen something like that in your experience?Thank you

Read other answers
RELEVANCY SCORE 54.8

Could anyone with the technical knowhow comment on the Sempron 2800+ vs Athlon P 2800+, I have to build up a few computers for someone, and would like to give the best 'bang for their buck', and I am uncertain as to the possible advantage one of these CPU's has over the other.
The Sempron is 15% cheaper, but the sales guy says the Athlon XP is "much faster" and better, ?? but I thought the Sempron was just Athlon XP relabelled to separate the old Athlon XP from the newer Athlon 64?
The Athlon they have is a Barton Core.

Thanks in advance.

Trevor from New Zealand
 

A:Sempron 2800+ vs Athlon P 2800+

Read other 11 answers
RELEVANCY SCORE 50.8

Amd ATH Xp 2800+ Vs Amd Ath Sempron 3000+

Which one is better and faster, longer lasting and good for multitasking....


cyber
 

A:Amd ATH Xp 2800+ Vs Amd Sempron 2800+

the XP is a much better processor than the Sempron.

The XP has more L1 and L2 cache.

The semprons were designed to be stripped down processors for the XP socket A series.
Semprons were designed for laptops.
 

Read other 6 answers
RELEVANCY SCORE 46.4

I have a Cisco catalyst 3500xl I ran the standard installation and entered a ip subnet and gateway that's all i'm new to Cusco but I want my ports all have internet access but not sure how
 

A:[solved] Cisco switch configure Cisco catalyst 3500xl

First question is what type of ISP service do you have and how many devices? If you want to connect 5 devices, you'll need 5 static IPs from your ISP. The reason is that 3500xl switch is a layer 2 switch only. Which means there is no routing /layer 3 functionality.
 

Read other 14 answers
RELEVANCY SCORE 46.4

Can ATA Center and Gateway (no lightweight) servers be configured for automatic failover/mirroring to another server?  Does ATA support this?

Read other answers
RELEVANCY SCORE 46.4

I am trying to setup the Failover where it plays a video file (mpeg2 with transport stream) upon failure. If I set this file to play as a file, it works fine, but then stops when finished. What I would like to do is have this file loop continuously until the network is re-connected. I have tried to set up a playlist, but it does not work. My playlist was created using notepad and is entitled ASIC .txt

Settings ….

Backup Channel ….. Playlist
URL box is ………. file:///mnt/usb/sda1/mediafile/React (have also entered React.txt)

My txt file is attached, but is ….

media:file:///mnt/usb/sda1/ASIC .mpg
Any help would be gratefully received. Alternatively, is there a way to get the single file (that works) to continuously loop?
 

A:Failover from USB

There may be a way to script something to work like you want, but the script would be a lot more complicated than simply "play x". It will also need to check to see if the alarm has cleared and then stop playback. But it will largely depend on what exactly you are doing (or trying to do) as you haven't provided near enough details for anyone to help.
 

Read other 4 answers
RELEVANCY SCORE 46

hi everyone,how can i setup automatic fail over for this diagram.A and B are different ISP suppliers and we dont have to access for edit router configuration.both are leased lines.thank your very much for your support.
 

A:automatic failover

Many business class router/firewalls have feature called SLA where you can program a secondary Internet circuit as a backup to the primary. The router/firewall will do a continuous health check on the primary circuit to a designated site you choose on the Internet. If there is anything that drops under the threshold you set, the router/firewall will roll over the Internet connections over to the secondary circuit.

I'm not sure if the SMB router/firewalls which advertise themselves as dual WAN ports can operate in this manner. I do know their basic operation is to do a round robin or if link status for the primary fails will roll over to the secondary WAN port.
 

Read other 1 answers
RELEVANCY SCORE 46

My PC just crashed and I was unable to get online. The messages was 0x800CCC19 and then Autofailover
6/1/7600.16385 Can someone explain what this means, and is there a way to fix it?

A:Auto Failover

Many times that is caused by a anti virus program.

This tutorial will help with you system specs.

By Brink:
System Info - See Your System Specs

Read other 5 answers
RELEVANCY SCORE 46

Hi,
We have an SMTP server on our network which we use for scan-to-email from photocopiers, UPS notifications etc.. I'd like to setup a second one in a different office which can take over the load incase the first goes down.

I've done a bit of reading, but haven't been able to find anything solid on how to set it up.. I was thinking something in DNS.. but from what I understand MX records are for incoming mail from other mail servers..
 

Read other answers
RELEVANCY SCORE 45.6

i have 2 network connections but my internet connection always defaults to "Local Area Connection". if my cable modem disconnects for some reason, i have to pull the ethernet cable from my windows 7 before it starts using the Wireless Network Connection
which uses my backup internet. how can i detect and failover automatically without buying a dual wan router?
Configuration for interface "Local Area Connection"
    DHCP enabled:                         Yes
    IP Address:                           192.168.0.11
    Subnet Prefix:                        192.168.0.0/24 (mask 255.255.255.0)
    Default Gateway:                      192.168.0.1
    Gateway Metric:                       0
    InterfaceMetric:                      10
    DNS servers configured through DHCP:  192.168.0.1
    Register with which suffix:           Primary only
    WINS servers configured through DHCP: None

Configuration for interface "Wireless Network Connection"
    DHCP enabled:  ... Read more

Read other answers
RELEVANCY SCORE 45.6

I cannot get my computer to startup....please help

A:startuprepairv2 auto failover

Please tell us what happens when you boot your computer, what is the make and model of the computer, and do you have a install or recovery disc

Read other 11 answers
RELEVANCY SCORE 45.6

Hello,
I'm new to the forum. However, I really need help on my Vista OS on an HP desktop PC. I am getting the following reports:
1. "Startup repair cannot repair this computer automatically".

2. "Problem signature - 01 Auto Failover"

I have read some of the responses to this problem and have 2 problems. First, I am a novice when it come to this sort of thing, and next, my PC did NOT come with a disc.

Question: Obviously, Vista is Trash ie, most of the responses, and so is 7. However, since 7 seems to be the only option to upgrade to, how do I do that after purchasing a 7 upgrade disk, if I can even do it???

By the way, a common problem I find in your threads is the downloading of photos, which is the last thing I did before my PC crashed.

Also, will I lose "My Documents" if I can an upgrade???

If ANYONE would be so kind as to offer me some advice (in NOVICE Terms Please , I would greatly appreciate it.

Mikey

A:Signature 01 auto failover

Welcome
See if you can boot from a boot DVD?
Create a Recovery Disc
you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.



Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the informati... Read more

Read other 2 answers
RELEVANCY SCORE 44.8

hi,
is there anyone here can answer my query?
is it possible to set failover clustering to two Windows 7 desktops? How?
We want to provide high availability set-up to prevent any downtime.

Thank you.
Brian 

Read other answers
RELEVANCY SCORE 44.8

Hi,

I'm doing a script to fail over my company's W2K3 cluster with 2 nodes.
The idea is to simulate a cluster fail over by the script, count the time of fail over for each group and put them in a .html file to send by email.
I found some useful scripts on the web, where I took part of the code.
Here's what I have until now:

Option Explicit
Dim objClus, WSHShell, objNet, objFS, strSysName, strDir, strClusDir, strOutputFile, fsoOutputFile
Dim itmNode, itmGroup
Dim c1, c2, c3, p1, p2, p3, v1, v2, v3
Dim cOff, pOff, vOff, cOn, pOn, vOn, cSt, pSt, vSt

Set objNet = WScript.CreateObject("WScript.Network")
Set WSHShell = Wscript.CreateObject("WScript.Shell")
Set objFS = CreateObject("Scripting.FileSystemObject")
Set objClus = CreateObject("MSCluster.Cluster")
objClus.Open ""

strSysName = objNet.ComputerName

strDir = WSHShell.ExpandEnvironmentStrings("%SYSTEMROOT%")
strClusDir = strDir & "\Cluster\"

strOutputFile = strClusDir & objClus.Name & ".htm"

'if (objFS.FileExists(strOutputFile)) then
' strOutputFile = strClusDir & objClus.Name & ".htm"
'end if

Set fsoOutputFile = objFS.CreateTextFile(strOutputFile, True)

fsoOutputFile.WriteLine()
fsoOutputFile.WriteLine("<HTML>")
fsoOutputFile.WriteLine("<BODY>")
fsoOutputFile.WriteLine("<HEAD>")
fsoOutputFile.WriteLine("<style>")... Read more

A:VBScript for W2K3 Cluster failover

Hi and welcome. Please don't post more than once for the same subject.

Reply here:

http://forums.techguy.org/showthread.php?t=258804
 

Read other 1 answers
RELEVANCY SCORE 44.8

I need to configure my router for three routes ( two separate fiber links and a radio link) with one of the fiber links being the primary link, the other fiber a secondary route and the radio a backup route for the fibers.

I am looking for a best fail-over configuration that will allow traffic to flow primarily on fiber link A and failover to fiber link B incase of failure in link A and incase of failures of both fiber links, the traffic to flow on the Radio Link. The configuration should allow for reverse once the fibers are restored.

I will be routing via eBGP to the provider end and OSPF on my internal network.
 

A:configuring 3 redundant routes with failover

Homework???
 

Read other 1 answers
RELEVANCY SCORE 44.4

I link my Windows home PCs (7 and some XP) to a separate file server box via a persistent network mapping. There's a separate mirroring server in place on the network too.

If one server goes down, theres an undignified scramble to remap drives so that work can recommence - but is there a quick way to have Windows 7 pick up the job of determining primary and secondary availability to speed this?

I know I could probably do something involved and complex via a virtual server and clustering but I'd prefer something simple and client-side if possible !
--
Martin

A:Quick and dirty way for alternate failover server?

I thought the basis of this type of RAID setup is to redirect traffic from a primary to a secondary without interruptions. I didn't think you would need to do anything if the setup is correct.

Read other 4 answers
RELEVANCY SCORE 44.4

I am looking for a script that will dynamically update Windows 2003 DNS (AD) to the second server when the first server fails. The servers are appliance servers (not windows).

Does anyone have a script to do this?

Example of script function:
1. ping first server every 10 seconds
2. if no ping reply for 60 seconds DDNS the search.x.com DNS A and PTR record to the second box.
3. if the first server becomes available again for 120 seconds then DDNS the search.x.com DNS A and PTR record to the first box again.
end
 

A:Does anyone have a Windows script to update DNS for failover to second server-not RR

Read other 9 answers
RELEVANCY SCORE 44.4

Hi,

We have a fairly unstable Internet connection through Dodo (Please no quips about peanuts and monkeys, I know Dodo is a terrible ISP). They, and Telstra have refused to fix the problems, preferring instead to blame my equipment, despite the fact that I have replaced every part of the network many times over. Line noise on the connection is terrible, and causes anything up to 30+ disconnections a day, from anywhere between 10 seconds to 90 minutes.

As my sons play a lot of online gaming, disconnections not only kill the game, but also get them demoted on the servers.

So, they have a 3G mobile phone with 1.5GB data allowance per month.

But we are having problems finding any software (preferably FREE), that will let us set up a fail over environment such that when the PPPoE connection fails it switches to 3G, and automatically reverts to PPPoE when that service comes back online.

Any one know of any software that meets this need?

thanks
Tanya

A:Internet connection failover PPPoE & 3G - What software

I think you are looking for Connectify dispatch which can use both the ISP connection and the 3G at the same time though it's not exactly free it may still be worth the price.

Connectify Dispatch - The Software Internet Load Balancer

Read other 4 answers
RELEVANCY SCORE 44

Laptop is acting strangely as of late. I was playing a game and had a GPU driver crash, which subsequently locked up my system. After having to force power it down I got stuck in the startup repair loop. I tried startup repair at least 10x, and it would always say it couldn't correct the problem. On every attempt it came back as a "Bad Driver" as the issue. On my last attempt to boot it finally went through to windows, but things are randomly crashing. I checked AVG, which says resident shield isn't active and it cannot turn itself on. I tried to run several scans and they all fail automatically saying that they were terminated. I ran Malwarebytes and it did not find anything. I would appreciate any help that I could receive.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 
Internet Explorer: 11.0.9600.17041  BrowserJavaVersion: 10.51.2
Run by Lucas at 13:43:21 on 2014-04-27
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.6038.3784 [GMT -4:00]
.
AV: AVG AntiVirus Free Edition 2014 *Disabled/Outdated* {0E9420C4-06B3-7FA0-3AB1-6E49CB52ECD9}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: AVG AntiVirus Free Edition 2014 *Disabled/Outdated* {B5F5C120-2089-702E-0001-553BB0D5A664}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Program Files (x86)\IObit\Advanced SystemCare 7\ASCService.exe
C:\Windows\system32\nvvsvc.exe
C:\Program Files (x86)\... Read more

A:Auto failover: Bad Driver, finally booted. AVG not scanning.

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/532464 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 43.6

Cisco does provide occasionally good study and reference material for free. It is well worth the registration to be on this list because this is the fourth offer I have received from them on material that is otherwise very espensive to get.

Thought I would share this with those who are interested in Cisco and its products.

The link is www.cisco.com/go/mssmbetour1 a walk thru their site you will find other white papers and books available for little or no cost and when your learning Cisco cost is a major consideration.

Read other answers
RELEVANCY SCORE 40.8

free actually...man this stuff really works. I'm attend college up in michigan and i'm a Computer science major. All of a sudden a lot of my classmates started talking about getting free ipods and free computers so i checked out the site and it really works. I checked out my friends gaming system that consists of a athlon 64 2800+ Cpu with 500 mb of Ram and Geforce 4 card that actually runs really well. I didnt believe this offer at first, but dude it actually works....try it out and you'll see. I'm in the process of getting this free gaming system. You can get it too by signing up at this link and then signing up for one of the free offers...(there are quite a few free offers and trials...don't sign up for the ones that cost money cause they normally arent that great)..Sign up for the trials and after a certain amount of time you can cancel without getting charged for it...Everyone really has to check this out...this is the link..Please help me get this system...after you sign up you can get your referal limnk posted on a site like this....here is the link....
go to FreeDesktopPC...check it out in google...its a gratis site. and after the site enter

Edited by Mod to remove advertising
 

A:AMD 64 Fx 2800 PC.??

This looks like advertizing to me!
 

Read other 2 answers
RELEVANCY SCORE 40.8

I recently bought a new motherboard and processor for my computer. The store was out of the ATX motherboard I wanted, so i opted to get a bundle that included a Mico-ATX board. I installed this into my tower, and hooked it up to my old power supply (400Watt) everything seems to be installed correctly, but when i go to start the system it begins to start and then powers down after less than a second.

It will only do this once per time it is plugged in, and does not try to start until it is unplugged and replugged in.

Any ideas what could cause such a thing? I think the connections for the sys switch are the most likely- but that doesnt really explain the one time almost booting thing?

Any help is GREATLY appreciated.
 

A:Amd 64 2800+

Read other 12 answers
RELEVANCY SCORE 40.8

Hi
I bought a barebone with a soyo dragon plus KT600.
I took my cpu amd xp 2800 from my old pc and insert it in my new soyo.
Everything works fine. the speed seems OK. But why my system tells me
that I am using " AMD Atlhon (m) 1,25 GHz " ?????????
thank you anyone.
 

A:cpu amd xp 2800

Read other 9 answers
RELEVANCY SCORE 40.8

Hello out there gurus of technology!

I have a (hopefully) stupid (easy-to-answer) problem.

Our computer's running slowly (I believe the genesis was when I was reading a blog about shoes,
clicked the wrong thing and up popped...whaddya know? porno!) ...so I ran HJT.

The log is below.

My question is: will someone who knows about such things puruse it and let me know if anything's fishy?

It all looks fine to me, but I'm a simpleton when it comes to this stuff.

I would appreciate it; having the 8 y.o. kidlet see porn is
more than a bit disturbing.

Thank you in advance!

- Cassiemodo

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.99.0
Scan saved at 11:08:59 PM, on 1/27/05
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\SPOOL32.EXE
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\SYSTEM\RPCSS.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\PROGRAM FILES\SYNAPTICS\SYNTP\SYNTPLPR.EXE
C:\PROGRAM FILES\SYNAPTICS\SYNTP\SYNTPENH.EXE
C:\WINDOWS\SYSTEM\STIMON.EXE
C:\PROGRAM FILES\COMMON FILES\REAL\UPDATE_OB\REALSCHED.EXE
C:\WINDOWS\SYSTEM\QTTASK.EXE
C:\PROGRAM FILES\AVPERSONAL\AVGCTRL.EXE
C:\PROGRAM FILES\AVPERSONAL\AVSCHED32.EXE
C:\WINDOWS\SYSTEM\ATIPTAXX.EXE
C:\PROGRAM FILES\MICROSOFT ACTIVESYNC\WCESCOMM.EXE
C:\WINDOWS\SYSTEM\DDHELP.EXE
C:\WINDOWS\... Read more

A:Win 98, IE 6.0.2800

Hi,
AVG 6.0 will be retired I think, we are using 7.0 now.

www.grisoft.com

You should uninstall the older version before installing 7.0. At the Grisoft site it may tell you when the 6.0 version will expire and not be updated.

I don't see anything malware related in the log, so I would say whatever you clicked on didn't install anything.

The only way to be sure would be to run some scans with AdAware and SpyBot which I do not see installed.

We are using AdAware SE personal edition v. 1.05 and SpyBot v 1.3 now...if you have any older version, they will be fully retired and you will get no more updates for them so they will do no good against new malwares.

One thing, though: Since a child uses this computer, you probably have a bunch of kiddie games installed, and the spyware removers often find bundled spyware in those...very often in fact. The games may or may not continue to work if the bad parts are removed...but, you can of course reinstall those if you wish, and ignore what is found in them, if you wish....Usually, the type of spyware found in kid games like Broderbund, Learning Central, Hasbro, etc are like the DSS Agent and are very minor risks...

Info on downloading, installing and using AdAware and SpyBot:
SpyBot Search and Destroy v. 1.3> is the latest. The older versions are abandoned and will not give you any more updates!

Both of those programs are available here:

http://www.majorgeeks.com/downloads31.html

Here are the directions for insta... Read more

Read other 1 answers
RELEVANCY SCORE 40.8

Hi i have a amd athlon 2800+ and i havnt been able to run it on stock settings FSB:166 becuase it was resetting,exiting,critical errors during games or other stressing applications.
I put it back to the stock settings (From FSB:160) and i also increased the Vcore to 1.7 (stock 1.66) i know that the max is 1.85. atemping to make it stable.
I want to know if this will damage my cpu at all since it is still on stock settings?
So far everything has been running fine but my cpu temp are about 3degrees higher than usual (turns up cpu fan RPM) Idle:45 - Load 52 Degrees

PS: Just wanted to know as i have no money to replace parts
 

Read other answers
RELEVANCY SCORE 40.4

i am looking at buying a laptop to use for schoolwork and traveling and such. I already have a good desktop so im not looking to spend tons of money. Ive come across 2 that seem to be good deals through bestbuy but i have a question. the 2800+ runs at 2.166ghz and the 3000+ runs at 1.6ghz.... Why is that?
Here are the links to the laptops

3000+ http://www.bestbuy.com/site/olspage...99245&productCategoryId=cat01174&type=product

2800+ http://www.bestbuy.com/site/olspage...04961&productCategoryId=cat01174&type=product

so which ones the better deal??
 

A:3000+ or 2800+ ?

It is a misprint. The 3000+ has a 2.2 clock speed and the 2800+ is 2.16.

As to which one, buy the cheaper one. You will not notice any difference between a 2800+ and a 3000+.
 

Read other 2 answers
RELEVANCY SCORE 40.4

I recently bought a AMD 2800+ and I am trying to figure out how to over clock it to AMD 3200+. I have sufficient memory, and crap. I am running an DFI Ultra Infinity Board. So if anyone had some pointers. (bus speed, multiplier, other things I need to know) that would be great! thanxs :giddy:
 

A:Overclocking an AMD 2800+

The chips multiplier is probably locked locked so the only thing you can do is raise the bus speed. Get CPU ID and it will tell you the multiplier and bus speed to help you overclock. http://www.cpuid.com/
 

Read other 1 answers
RELEVANCY SCORE 40.4

I built my PC about 3 years ago and here lately It's been running very hot. The PC has always ran a little on the warn side since I'm running an AMD processor. Since the PC was built it's always ran around 47c now she's running 52c at idel and goes up to almost 60c on load. I used Artic Silver 5 when I built the machine so I have pretty good thermal compound on the processor. Can the paste wear off after a period of time? Do I need to reapply? Thanks
 

A:HOT Athlon XP 2800+

Just before you rush in and reseat the CPU - heatsink, remember that the reported temperature will also be fully reflective of the the "ambient" room temperature and any changes.

If that is up 5, then so will the CPU.
 

Read other 2 answers
RELEVANCY SCORE 40.4

I am trying to open up passive ftp to pass threw my network. The problem I have is with ftp data getting out to a server else where. The client on my network never gets a connection to the server and the file doesn't get transfered. Regular active ftp works fine. The problem has to be in my access-list somewhere.

Here are the lines in my access-list that might matter:

access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 101 deny tcp any any
access-list 101 deny udp any any

now the ftp-data line shouldn't that let in any ftp traffic coming in?

would I have to try something like this:
access-list 101 permit tcp any eq ftp-data any gt 1023

Any suggestions I will have to do in off hours so I don't interupt any traffic.

Thanks in advance,
TK
 

A:Cisco IOS 12.1 on Cisco router

Is this a standard FTP port they are trying to connect to? The data connections use a wide rang of ports for the transfer of data, so limiting it to a specific port won't work. According to your access list the ftp-data is being allowed from any to any.

BTW, the remote server needs to support PASV.
 

Read other 2 answers
RELEVANCY SCORE 40

how fast should this thing be running at? or is there a conflict with these fast AMD chips when windows reports the speed (right clickin my computer is how i checked)

Specs are:
ASUS A7V8X-X
Athlon XP 2800+

512ram
120gb HD (3 parts)

WinXP home
 

A:Athlon XP 2800+ - why is WinXP saying it's @ 1.6 ghz????

Read other 16 answers
RELEVANCY SCORE 40

I have ABIT VA-20 mb and AMD 2800+ Barton CPU AXDA2800KV4D (333MHz FSB) with 2GB of PC3200 FSB400 memory. I can get BIOS to recognize CPU correctly as 2800+ by setting JP8 to 2-3 and JP9 to 2-3 (166 MHz FSB) but WINXP SP3 just does constant reboot. If I set JP8 to 2-3 and JP9 to 1-2 (133 MHz FSB) it will boot OK (BIOS reports CPU as 2200) and run but I get abnormal reboots every so often. Is my memory the problem? Do I need to match memory speed with CPU FSB? If yes do I need 166 or 333 MHz memory? How can I get my 2800 CPU to run reliably?
 

A:VA-20 Setup For 2800 Barton cpu

You sure the heatsink is seated well, and there's enough, but not too much thermal paste applied between the CPU asnd the HSF? Is everything else fine with your system? Meaning, have you thought it might be something else than CPU or RAM...?
 

Read other 2 answers
RELEVANCY SCORE 40

Hello Everyone i need some help i am working on a server and Its a poweredge 2800 OS is Windows 2003 I want to replace the scsi drive in it but i dont want to lose the info for its for a client. It has 3 drive in it and the total is 124 gig this is new for me and i was hoping some one colud tell me how to put new drives in without messing up the active directory and save all the settings and install 3 new scsi drive anyway all you help would be appreciated.
 

A:Help With Dell Poweredge 2800

Read other 6 answers
RELEVANCY SCORE 40

Hello Techies,

While using my computer today at some point, I don't know of any paricular action on my part that may have caused this, everytime I open a new browser window the "window" itself is about 1.5" x 1.5" and I have to maximize it or manually "stretch it" in both directions to make it a reasonable size.

Got any ideas?

trumpetman51
 

A:Internet Explorer 6.0.2800

I have a workaround that I use for that issue. Open a new window, stretch it from the corners until it fills the screen (or is the size that you want). Now click File and close. The windows should open correctly now.
 

Read other 2 answers
RELEVANCY SCORE 40

Hi. Just bought a Mobile XP 2800+(Barton) cpu which only seems to run at 606 mhz. I can't seem to find any way of changing the multiplier in the bios.
I have a Gigabyte 7VT600P-RZ(-C) motherboard, 1024 RAM. Running win XP Home (soon to be Pro) edition. Running a Athalon XP1800+ at the moment. Ran Cpuz with 2800+ and it said:
Core Speed: 606.0 MHz
Multiplier: 6.0
FSB: 101.0 MHz
Bus Speed: 202.0 MHz
e.t.c.
I thought it would run at default speed of 2.1 GHz before having to do any adjustments. Please help.
 

A:Athalon XP-M 2800+ Problems

Read other 8 answers
RELEVANCY SCORE 40

I am having problems with IE 6. I'm running Windows ME and have IE version 6.0.2800. I tried an update, but I get a message telling me it's already installed. I tried the repair feature in Add/Remove Programs and it says it cannot be repaired and to reinstall. Would someone please tell me the steps to do this?

Thanks so much.
 

A:Internet Explorer 6.0.2800

What kind of problems are you having with IE6? I was having problems with script errors in IE6. I was unable to remove it, so I went to Microsoft's site and installed IE6 over top of the current install. When the install started, it told me that there was already an install and gave me the option to re-install, repairing the previous. It worked for me and I haven't had any problems since.

Just a thought to try.

Good luck,

p51
 

Read other 1 answers
RELEVANCY SCORE 40

For some reason my AMD Athlon XP 2800+ Barton is running at 55C idle. I have an Akasa heatsink (with copper base) on it with white thermal compound. I have a case fan close to the heatink blowing air out of the case and there is also extra fan on the inside of my Antec PSU which attaches to a fan connector on the motherboard. This also sucks air out of the case and blows it out the back of the PSU. My case has vents in both the front and the sides and I have tucked all the cables into empty drive bays etc.

My case temp is 30C. I'm not sure if this is hot or not but the room my computer is in is pretty cold so it seems strange.

Maybe I should move the rear case fan to the front and use it for intake seeing as the PSU works as an exhaust?

I'm going to order some Arctic Silver 5 in a couple of weeks and another case fan, it's currently out off stock.

This is my heatsink: AK-795

Any ideas?
 

A:HOT AMD Athlon XP 2800+ Barton

Read other 16 answers
RELEVANCY SCORE 40

Hello, i am looking to upgrade parts of my laptop but am not surer if this is possible. I know that uprading RAM is easy and need no further help on this but i would like to get a P4 ht if possible, do these even exist for laptops. Would i have to change my motherboard?? add additional cooling?? also a video card upgrade would be useful as well?? any help?

My current system is a Sumsung V25
Pentium 4 2.8
845g chipset family ( which according to intel supports HT technology)
533mhz system bus
512mb ram
 

A:Upgrading a Samsung v25 P4 2800

Most laptops are NOT upgradeable in any way apart from RAM or replacing the HDD.

Motherboards are specific to each model of laptop. If by chance there was one that was available as a spare part, from a later model that would actually fit in the case, its most likely it would cost more than a new laptop.

Some top end (expensive models) can have a video card upgrade but as far as I know that model will not be one (it's more of a budget model).
 

Read other 2 answers
RELEVANCY SCORE 40

What sort of speed increase would I see between an amd [email protected] and a amd64 2800? Is it worth the upgrade at the moment?
 

Read other answers
RELEVANCY SCORE 40

I received my Athlon XP 2800+ today and installed it on my SOYO KT-400 DRAGON ultra platinum edition mobo... it first ran at 1250Mhz, as the mobo did not recognize the cpu...

So i went and downloaded the new BIOS, flashed and voila. I followed instructions from Soyo website and set FSB at 166... about 2 mins into running the machine without running any applications and the anti-burn shut off my machine....

Turns out the chip runs at a constant 63 celsius/141 fahrenheit when set at 1250 mhz... but when i set the FSB to 166 it skyrockets to 85 degrees, who knows how much hotter it would get without the anti-burn monitor.

With my fan running at a constant 4800 RPM (Thermaltake Volcano 9) it still overheats, i even used arctic silver paste.

Does anyone know what is happening?

Is my relatively new heatsink outdated already? Could there be too much paste that it doesnt conduct at all (not likely, i spread that stuff paper thin!)

Thanks for you help...
 

A:2800+ Barton overheating....

Read other 16 answers
RELEVANCY SCORE 40

Hi guys

I am building a system with these components

pc chips m860
sempron 2800+ s754
ebuyer value 512MB pc2100
etc.

After putting it together it would not boot. I replaced the ram with a stick of
corsair twinX and this message came up

CMOS checksum bad
CMOS date/time not set
*****Warning:Unknown processor*****
The processor installed in your system is not known by the BIOS
Please contact your BIOS vendor for appropriate updates
Fatal error...system halted

Is my CPU faulty?

According to the pc chips website this mobo supports the 2800+ out of the box.

see pc chips so I should not have to update the BIOS

I'm not going to shell out for an athlon 64 just for that!

Where would I stand if I had to RMA because I needed a BIOS update?

All help gratefully recieved.
 

A:pc chips and sempron 2800+

Read other 15 answers
RELEVANCY SCORE 40

I have just recently built a new computer and have run into a few problems. First off, my CPU (a AMD Barton 2800+) should be running at 2.08 GHz, it's actually running at 1.25GHz. Not only that, but it's even overheating! It runs at about 65 C and up with the heatsink I have (a thermaltake TR2TT, aluminium with a copper base). It's not much, but it's enough to keep resetting my comp. To keep it cool I currently have the case open and a extra fan placed next to it. Here's the rig I just built:
Windows XP Home edition
Asus A7N8X w/nvidia nForce2 ultra 400 chipset
The malfunctioning AMD Barton 2800+ CPU
And the case has a 400W power supply

So, what is wrong with it and how should I go about fixing it?
 

A:Overheating barton 2800+

Read other 8 answers