Over 1 million tech questions and answers.

Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

Q: Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

I have a Dell XPS 18 portable all-in-one machine that came with Windows 8, then I updated it to Windows 8.1 without any problems. It caught a nasty virus and I had to restore it to factory settings, which leaves me back at Windows 8.

I have tried multiple times to install the Windows 8.1 update through the Microsoft Store but keep getting Error Code 0xC1900101-0x40017. I have tried the following but get the same result;

Ran all of Windows Updates that would come upVerified that all drivers were up to date. Note: my video driver is NOT a Nvidia but an Intel. I've seen posts stating that this driver needs to be updated in order to fix the problem.Ran Selective Start Up

I don't know what else to do at this point because I have not been able to find anything online related to my problem. Please advise if you have any suggestions. Thanks!

FYI: Antivirus running is Avast!

RELEVANCY SCORE 200
Preferred Solution: Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18

Hi, many people with your problem blame Avast for preventing Windows 8.1 installation - "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017" - Microsoft Community. You can try to uninstall Avast and run the Windows 8.1 upgrade.

Good luck, werty

Read other 7 answers
RELEVANCY SCORE 103.2

I have a Sony Vaio 32 bit machine 4gb RAM.

It gets stuck at about 80-84% when updating then it says "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

I haven't ever been able to find decent info on the actual microsoft site. I have no devices plugged in, no partitions, etc. Why is this happening! Any work arounds? Would it be better to just burn the ISO and try it that way? But isn't that supposed to be the beauty of the "store" so I don't have to do that?

A:"Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"

Windows 8.1 upgrade reboots to black screen of 'nothingness'. - OUC1TOO - Site Home - TechNet Blogs

Error 0xC1900101 ? 0x40017 when installing Windows 8.1 - Microsoft Community








Originally Posted by Microsoft Forum Moderator


Error 0xC1900101 – 0x40017 when installing Windows 8.1


Hello,

We understand that many customers are receiving error 0xC1900101 – 0x40017 when installing Windows 8.1. This error is typically caused by an incompatible driver.



If you are receiving this error:
1.
First, please double-check the error code. There are many variations of error 0xC1900101, each with a different location code -- the error extension, located after the dash. The information in this thread is intended only for location code 0x40017. If you are receiving a different location code, these steps are unlikely to resolve your issue.

2.
Check that you’ve already updated all of your drivers. In particular, if you have an NVIDIA GeForce graphics card, make sure you’ve installed the latest Drivers - Download NVIDIA Drivers


3.
Check that you do not have any Frequently Asked Questions - What devices are supported by the SteelSeries Engine? that support the SteelSeries Engine installed on your PC. The SteelSeries Engine software is currently not supported on Windows 8.1. Please uninstall the software before attempting to update to Windows 8.1

Read other 7 answers
RELEVANCY SCORE 90.4

Error with windows update, trying to install the November update of windows 10

0xC1900101-0x40017
The Installation failed in the SECOND_BOOT phase with an error during BOOT operation.

I have done the DISM stuff the SFC stuff and even did a full CLEAN install of windows 10 losing all my programs and that's how i got the error i listed above. I downloaded the patch using the Windows Media tool as the windows update wont seem to download it and say it will try again later. It always seems to fail on one of the restarts.

Any Idea how to get the November update installed? Oh and now some of my programs are saying im missing MSVCP100.dll and trying to go to the download page at Microsoft just says try again later.

Read other answers
RELEVANCY SCORE 77.6

I receive a similar error again on our HP Pavilion Notebooks with AMD CPU when updating to Windows 10 Creator update as last time when updating to Windows 10. Our office has a few of the 17-G133cl notebook computers and all of them display the same error message: We couldn't install Windows 10 - 0xC1900101 - 0x20017 - The installation failed in the SAFE_OS phase with an error during BOOT operation. Which is similar to the error displayed during the initial Windows 10 update except that the error shown was 0x1900101 - 0x20000. Back then a BIOS update that became available that fixed the issue. We check for a new BIOS, but all notebooks have the latest BIOS already installed v. F.41 from 9/19/2016. All other systems including other none HP AMD computers upgraded just fine. Any ideas what could cause this issue with that type of system?

Read other answers
RELEVANCY SCORE 71.6

its been bugging me since day 1, I tried many ways to no avail, just curious has anyone got this sorted out?

A:have anyone here solved 0x40017 error code for windows 8.1

Hi, I am sorry to hear that. I also cannot install Windows 8.1 with the 0x20017 error code. There is no specific solution to the issue but in this thread there are many suggestions you can try (you may have already tried them) "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017" - Microsoft Community

Read other 2 answers
RELEVANCY SCORE 70.4

I tried installing the Anniversary update using the Media Creation tool and I get this error when I log back in after the setup reverted my installation:

0xC1900101-0x3000D
The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation

Any help would be greatly appreciated!

Read other answers
RELEVANCY SCORE 69.6

Hey,

I've tried to install the Win 8.1 Update via the Windows Store and got the 0xc1900101 - 0x30018 several times after the PC restarted at the ending of the update.

I know that several users solved this with disabling drivers, so I did some suggestions I've found.

1. Disabling AV (Kaspersky)

2. Disabling LAN Controllers

3. Uninstalling DAEMON Tools, TuneUp

4.

--> DISM.exe /Online /Cleanup-image /Restorehealth

--> sfc /scannow  

--> wsreset.exe

5. Trying to repair Windows Update itself via "WindowsUpdateDiagnostic.diagcab"

6. Disabling AIDA

7. Disabling all components from my ASUS motherboard

some other things I can't remember...

For your information, I don't want to install Windows 8.1 from scratch, as I have too many programs and I never had problems with installing an OS for this system (Win7, Win8).

Thanks for the help

UpdateLog:
2013-10-17 21:31:41:150 5840 25f4 Handler Deleting setup file '9600.16415.winblue_refresh.130928-2229_x64fre_client_Professionalwmc_gdr_de-de-IR1_CPWMCA_X64FRER_DE-DE_ESD.esd'
2013-10-17 21:31:41:150 5840 25f4 Handler : Installer completed. Process return code = 0x00000000, result = 0x00000000, callback pending = true
2013-10-17 21:31:41:157 5840 25f4 Handler :::::::::
2013-10-17 21:31:41:157 5840 25f4 Handler :: END :: Handler: Windows Setup Install
2013-10-17 21:31:41:157 5840 25f4 Handler :::::::::::::
2013-10-17 21:31:41:162 1064 3218 AU Preventing expiration of po... Read more

A:0xc1900101 - 0x30018 Error during update -> restore Win8

I fixed it with these things:

1. Uninstalling DAEMON Tools, TuneUp
2. via CMD (as admin) -> DISM.exe /Online /Cleanup-image /Restorehealth
3. Disabling Intel LAN, Azalia Audio, USB 3.0 via BIOS

Read other 19 answers
RELEVANCY SCORE 69.6

Windows 10 1511 will not update to 1607 by any method. Updates always complete to 100% then revert. Computer is a Dell Vostro 1720.

Background: The computer never appeared to update automatically, but there was never any error code. I tried to use the Windows 10 upgrade assistant. The upgrade would go through download and install to 100% but then restart back to version 1511 with no error message. Finally, I downloaded the 1607 iso, extracted it to my hard disk, and installed from there. Again the update went to 100% and then reverted back to 1511, but this time it gave the error message 0xC1900101 - 0x20017 "The installation failed in the SAFE_OS phase with an error during BOOT operation."

I have found several threads about this error, and it seems most likely that there is a driver conflict of some kind. I have looked at the setuperr.log from $WINDOWS.~BT/Sources/Panther/ directory but I do not see what is causing the error. Can anyone help with guidance on this?

setuperr.log text:

2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].[gle=0x80072ee7]
2016-09-21 19:53:52, Error CONX Windows::Compat::Appraiser::Utilities::ResolveForwardLink (1319): Failed to send request using default proxy[gle=0x80072ee7]
2016-09-21 19:54:32, Error CONX Windows::Compat::Appraiser::Utilities::SendRequest (1259): Failed to connect to the internet or send request: [12007].... Read more

Read other answers
RELEVANCY SCORE 68.8

Hello out there,

since seven days i try to update my system to WIN8.1. from the first try i get the errorcod 0xc1900101 - 0x30018.
I have already made a reinstallation of WIN8 and deinstalled everything exept the networkdriver. Allways get the same message. The installation seems to work fine till deviceconfiguration 64%. Then it restarts and sets back to WIN8.
My system is Satellite Pro C870 -1EJ
Need some help, or better an solution.

THX

verzweiflix

A:Satellite Pro C870 - Win8.1 update - Error 0xC1900101 - 0x30018

Just solved it myself,

and for anyone else with the same Problem.
It has been the Catalyst suite. Just deinstalled it and voila
It now works.

Read other 14 answers
RELEVANCY SCORE 66

Hi, this is my first post so I apologize in advance for any naivete.

Right, so I've been using Windows 10 home without (much) issue for months now, and I decided to do the anniversary upgrade. All is well until it gets to ~75% at which point I blue screen with error






0xC1900101-0x4000D - The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation



This started me off on a long and frustrating journey over the last three days desperately trying everything I could find online to fix the issue, but I'm at the point of giving up, so I figured maybe some kind soul would aid me online.

Thing's I've tried thus far (that I can remember - it's been a lot):
Doing the anniversary upgrade from windows updateDoing the anniversary upgrade via the windows upgrade assistantDoing the anniversary upgrade via ISODoing the anniversary upgrade via ISO from bootable USBReinstalling (not fresh) Windows 10, which yields bsod




0xC1900101-0x2000C - The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation



Ran chkdsk, which fixed a couple corrupt files, but didn't solve the problemRan sfc, which reported no errorsUpdating every driver I could (using DriverMax to identify out of date drivers, but not to install them)Ran driver verifier with all options but low resources simulation on all non-microsoft drivers, which causes a bsod before it gets to login



... Read more

A:Windows 10 Anniversary Update BSOD 0xC1900101-0x4000D and More!

Ran the DM Log Collector - attached is the result.

Read other answers
RELEVANCY SCORE 65.2

Previously, I'd gone through a terrible tribulation trying to get my two HP computers from the initial RTM build 10240 to version 1607 Anniversary Update. Spent hours/days trying to troubleshoot it. The only thing that eventually worked was to download a specific ISO file, for version 1511 build 10586.679. I did try updating to 1607 in the next step, but that failed... and I gave up.

Fast forward a couple months, 1607 got pushed to one of my computers successfully. However, the other one ended up failing.

There were many posts about this issue back in the earlier days of people trying to update from RTM 10240. Deja-vu. However, nothing seems to work. I tried downloading the 1607 ISO file and running it... which resulted in the error above after about 1.5 hours. Next, I used the Media Creation Tool to try getting 1607 installed... ran into the same error again.

I did leave the notify Microsoft option in place, so whatever errors were made ended up forwarded to Microsoft. But I'm wondering if there's anything I can do to fix this... or if I'll just have to wait. Any thoughts/suggestions?

Thanks!

Read other answers
RELEVANCY SCORE 64

Hi, how are you?  I am posting here because my error is 0xC1900101 0x30018 (see pic).  I get "stuck" on 40% overall and 23% of installing features and drivers.  I say "stuck" because the inner percentage circle breathes but nothing happens past those percentages.
 
I have an Asus laptop running Windows 7 Home 64-bit on a Samsung SSD.  I read other forums to turn off antivirus - so I permanently turned all of Norton off but no luck 

A:Windows 7 to 10 error 0xC1900101 0x30018

Here I have the exact same problem. Also an Asus Windows 7 -64bits
It stucks at same 40% 23%

Read other 39 answers
RELEVANCY SCORE 64

trying to update windows 8 to 8.1, when I've completed the download and I restart the computer I get an error message saying I need to restore, with error message:
0xc0000225

When I turn off the computer, and back on It says it wasn't able to update to 8.1, and it did changed back to regular windows 8.
and get this error message:
0xC1900101-0x20017

how can I fix this?
Not very good with computers

Read other answers
RELEVANCY SCORE 63.2

Upgrading a Windows 8.1 installation and it stuck at getting devices ready at 2%. No BSOD. Has to be specific to 8.1 as I have already installed 10 on a clean partition with no issues on this machine. All drivers up to date. Did try removing Avast. No wireless devices attached. Not really bothered but an upgrade would save a few hours. Tried it twice and it sticks in the same place "Getting devices ready 2%" A reboot restores previous OS.
There is a lot written about this error applying to Windows 8 and wireless devices in laptops....this is a huge desktop machine.

A:Windows 10 Error code 0xc1900101-0x30018

I suppose when it ran the compatibility checker, it showed no problems?

There was a time when Bluetooth devices caused problems. If you have any, you might try disabling them in the Bios.

I have not done an install over 8.1. The one time I tried, it said it could not with Media Center installed, so I stopped.

No log files left after the failed attempt?

Read other 38 answers
RELEVANCY SCORE 63.2

I have a samsung RV511, i5 processor, 4gb Ram it has windows 7 home premium.

I have been trying for days to upgrade to windows 10. It starts by copying the files and then on the first restart it gets stuck at the windows logo everytime. When i restart the laptop i get the message that the installation failed in the safe_os phase with an error during BOOT operation.

error 0xC1900101-0?20017.

I need your help to successfully upgrade to windows 10 home. I have attached the setuperr.log from C:\$Windows-BT\Sources\Panther\

A:Windows 10 Upgrade gives error 0xC1900101-020017

How about this: 0xC1900101 - 0x20017 Fixed!

Read other 0 answers
RELEVANCY SCORE 63.2

I can't seem to update to windows 8.1 it gives me this error after logging in again:

"Couldn't update to Windows 8.1

Sorry, we couldn't complete the update to Windows 8.1. We've restored your previous version of Windows to this PC.

0xC1900101 - 0x40017"

The funny thing is that a few weeks ago I already updated to windows 8.1 but because of a faulty driver and not being able to boot into safe mode I had to renew my windows and downgrade to windows 8.0. But now I can't seem to update to windows 8.1 anymore. I installed all the windows updates even the optional ones. So I did a factory reset and uninstalled everything that didn't seemed necessary for windows so the update would go smoother. I found a toshiba page with a tutorial to how to update to 8.1 and it told me to uninstall the following:

Genesys Logic
Intel PROSet
Intel Wireless Display
Realtek-audio driver
TOSHIBA PC Health Monitor
Realtek WLAN driver
Realtek Bluetooth Filter driver

and on another page it told me to uninstall anything related with toshiba so I did all that and these are programs I currently have:

http://oi58.tinypic.com/2ak028l.png

I also tried with a clean boot but still no change. My graphics driver atm is version 8.9 while the most recent released version is 13.12 but toshiba only release update 12.1 for windows 8.1 and I did try installing that but it just got me into a endless boot loop.


My laptop:

Toshiba Satellite C855-255
PSCBYE-05000NDU

Coul... Read more

A:Upgrade to Windows 8.1 keeps failing - error 0xC1900101

I have a C850D-13F..
same error....help us...

Read other 2 answers
RELEVANCY SCORE 63.2

I have spent several hours trying to get my HP Envy upgraded from Windows 8.1 to Windows 10. I have updated all my drivers, removed all USB items, tried disabling my wifi, and tried installing via USB - all to no avail. Can someone please help me!

Read other answers
RELEVANCY SCORE 62.4

Can anyone help me with this error? I get it every time when trying to get version 1607. I have checked many times; this is not related to any drivers but to something I do not understand. Here are included my Panther and Rollback folders.
Sources.zip - Google Drive

Read other answers
RELEVANCY SCORE 62

Please help,
I have a a XPS 13, 9333 originally delivered with Ubuntu but I need to run Windows 10on it.
So far, and after many attempts, I've been totally unable to install Windows 10. I am subscribed to MSDN so i downloaded the Win 10 installer with a new registration key.
Trying to install Win 10 booting from USB stops midway (black screen for hours).

I was able to install windows 7. Then I tried to upgrade to Win 10 running setup from it.
1st phase (file copying) OK.
2nd phase (driver installation) halts at 25% (40% total) and reboots recovering windows 7 and showing Error 0xC1900101 0x30018 t failed in operation "FIRST_BOOT", ... SYSPREP at startup.
Windows 7 installation from which I start is a clean one, no AV, no apps, nohing.
Any idea anybody?

Thanks
Stefano

A:XPS 13 (9333) - Unable to upgrade to Windows 10 - Error 0xC1900101 0x30018

sspelta,Below is a link for driver installation on your laptop. There is a driver install order that must be followed.Drivers Install Order and Tutorialshttp://dell.to/2guAvnE

Read other 1 answers
RELEVANCY SCORE 62

In Dell Precision M6600 upgrading from Windows 10 to windows 10 Anniversity Edition fails with error

     0xc1900101 - 0x30018       The installation failed in the FIRST_BOOT phase with an error during SYSPREP operation.I tried the following:
1. Uninstalled all unused software and installed latest Dell BIOS version A15 and drivers from Dell Web site.2. In Device manager removed hidden devices.4. Installed upgrade from USB3 drive by selecting keep files and application. 5. Verified that     sfc /scannowdoes not find anything:    sfc /scannow    Beginning system scan.  This process will take some time.    Beginning verification phase of system scan.    Verification 100% complete.    Windows Resource Protection did not find any integrity violati    ons.6. Tried DISM    DISM /Online /Cleanup-Image /ScanHealth    Deployment Image Servicing and Management tool    Version: 10.0.10586.0    Image Version: 10.0.10586.0    [==========================100.0%==========================]    No component store corruption detected.    The operation completed successfully.6. Tried from command prompt    bootrec /fixmbr    bootrec /fixbootwhich worked without errors.7. Tried    bcdboot d:\windows /vwhich re-creates recovery partition successfully8. Used Windows 10 Upgrade troubl... Read more

Read other answers
RELEVANCY SCORE 62

I have a brand new XPS 13, 9343 model with i7 processor and 512GB SSD. I am still within the 14 day cooling off period, and I'm now seriously considering returning it. I have never experienced such a load of nonsense trying to install any other piece of software.
So far, and after many attempts, I've been totally unable to upgrade to Windows 10. The very first thing I did was install all available Windows updates for 8.1 (there were 79 of them), and immediately after that I began the Win10 install saga. Nothing else has been done to the laptop - no dodgy software or USB devices (other than the boot USB where necessary). It is in a clean state.
- After downloading through Windows Update, the installation procedure is INCREDIBLY slow (eg it takes 36 HOURS to reach 42% completion - and at this point it hits the error message). What on earth can it be doing??
- I also tried creating a bootable USB through the media creation tool. If I boot from this USB drive and perform a "clean" install, this works perfectly - it takes about 8 minutes in total (which emphasises how ridiculous the 36 hours is). However, because it is a clean install and not an "upgrade", I end up with a non-activated version of Windows 10 and I get prompted to pay £99.99, which I have no intention of doing. I paid for the laptop on the understanding it would get a FREE upgrade to Win10!
- I have also tried using the USB (but not booting from it) to perform the in-place upgrade -... Read more

A:XPS 13 (9343) - Unable to upgrade to Windows 10 - Error 0xC1900101 0x30018

Hi Everyone,
If you are experiencing the issue whereby your XPS 13 is not upgrading to Windows 10 and is getting stuck or taking several hours, PM me with your Service Tag.
Thanks

Read other 55 answers
RELEVANCY SCORE 57.6

This update failure has occurred 5 times in the past three days on 32 bit system. My Win 8 update was purchased from MS in Nov. 2013 and installed then. During this recent update process I have updated Nividia card w/latest 32bit drivers and updated motherboard Intel chipset. This morning I ran SFC and found no integrity violations. DISM /restorehealth and /componentcleanup repaired and all OK. Still failed. Have read Barnacle's post and find 5 updates he mentions are missing. Need help getting them, if needed, and having problems doing so. Other guidance and suggestions appreciated.

A:Win 8.1 update fails repeatedly at 83% 0xC1900101-0x2000A

I suggest before running update:
Delete everything under: C:\Windows\SoftwareDistribution\DownloadDisable completely any anti virus softwareTask Manager -> Startup and disable everything in this tab.Win+X->Run and type: msconfig. On services tab, tick on: Hide all all Microsoft services then tap on Disable allPerform step 2 from this link: AUTOCHK Initiation Countdown Time - Change - Windows 7 Help Forums (the default in Windows 8 set to 1) then run: chkdsk C: /r <===== This may take a while to complete.Run Update.

Read other 8 answers
RELEVANCY SCORE 54.8

I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"

Can anyone tell me what this means and how to resolve the issue?

A:Upgrade error 0xC1900101-0x2000C

Originally Posted by canuck257


I have made several attempts to upgrade my desktop from 8.1 to 10. Each time the install freezes at the "copying files = 3%" point. When I reboot the system returns to my 8.1 setup and shows the above code with this explanation. "Installation failed in SAFE_OS phase with an error during APPLY_IMAGE operation"

Can anyone tell me what this means and how to resolve the issue?



You are doing this from files that were downloaded to this PC and told you it was ready to install the upgrade ?

Read other 0 answers
RELEVANCY SCORE 54.8

from 8 pro 64bit (with media centre) to 8.1, tried many times, no luck, always end up getting the same error code 0x20017, then rolled back to 8, every driver has been updated and there no external driver whatsoever, any help, please.

A:0xC1900101 - 0x20017 error while updating?

Hello wgan,

Is your Windows drive encrypted by chance?

If so, you'll need to decrypt it first, then update to 8.1. Afterwards, you could encrypt it again if you like.

Hope this helps,
Shawn

Read other 6 answers
RELEVANCY SCORE 54.8

8.1 install error 0xC1900101-0x40019 and 0x80070652 and Windows 8.1 installation failed and reverted back to Windows 8.0

I'm lucky the computer even came back to life. I have an Intel HD Graphics 4000 video card, so the review from ADRStudio replied on February 15, 2014 on page 18

could address this problem but I'm not so sure. I can't find the Win 8.1 drivers at HP for my machine, they only offer Windows 7 or 8.

I've been reading Latest Win 8.1 ISO "Breaks" System Image Functionality

and on my dual boot laptop with Win 7, this may be a fatal error when trying to install Win 8.1 because 8.1 adds another System partition and kills off the one I had been using.

Considering the overwhelming severity of this problem and how widespread & long-going it is, I'm gonna stick to Win 8.0 for now.

A:8.1 install error 0xC1900101-0x40019

Download the attached file.. Right click and Run as Administrator.

This will create a compressed folder on the Desktop, attach it to your next post.

Read other 1 answers
RELEVANCY SCORE 54.8

HI.
I've got a Dell Inspiron 660S that I'm trying to update to W8.1 from W8.0 and I keep getting this error every time I try.

Here is what I have done so far:

uninstalled speccy, avast
updated all legacy programs
updated all store apps except Microsoft Solitaire and Photos (they refuse to update)
ran Windows Update - took everything except .Net Frmwk 4 and Skype
ran disk cleanup, making sure to delete all temporary files
checked the prefetch folder and it's at 0 bytes

Having problems with DISM:
Dism /Online /Cleanup-Image /RestoreHealth doesn't complete
Dism /Online /Cleanup-Image /CheckHealth doesn't complete
Dism /Online /Cleanup-Image /ScanHealth says component store is repairable
Dism /Online /Cleanup-Image /AnalyzeComponentStore won't run - says it's not a good command or something like that

sfc /.scannow has 2 problems which will not resolve:
2015-11-12 21:38:05, Info CSI 000006e1 [SR] Repairing corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" from store

2015-11-12 21:38:05, Info CSI 000006e4 [SR] Repairing corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:78{39}]"api-ms-win-eventing-provider-l1-1-0.dll" from store

I grabbed the ESD file from the C:\$Windows~BT\Sources folder, and successfully created the W8.1 ISO, using the ESD to ISO tool from W10 forums, so I know it's not a bad download.

I'm just about... Read more

A:error 0xc1900101-0x20030018 updating w8.0 to w8.1

Hi, simrick. On break and have but a few minutes.
I know you're good friends with Wyn. I remember and ask her why she was not able to upgrade a machine from 8 to 8.1. I think it had to do with the processor? Check the SecurAble program in the "Installation" section about PAE, NX, and SSE type processors here: Suggested Steps To Take Installing And Setting Up Windows 8
Have you tried upgrading via the Store? Is there a link there? If not there is an update that does so. Shawn should have it in a tute here in 8F.

Those broken files concerning the Store concern me. Is there a install log file of the failed install on your machine? If so, look in there.
Never heard or seen anyone installing with an ESD to ISO with 8 to 8.1, (migfht not be possible with OEM key?) just a fresh install with ISO downloaded from MS site. Check.this out: Windows 8 and Windows 8.1 ISO - Download or Create
Are all drivers up to date? You might want to disable startup items and unplug any unnecessary devices before installing.
Have you tried Upgrade Assistant? Upgrade Assistant: FAQ - Windows Help
That's all I can think of for now. I'll try to check up on you later. I have pool league tonight though. If not, tomorrow morning.

Read other 5 answers
RELEVANCY SCORE 54.4

I have Asus X54hr with windows 8 pro.

I have already updated all my drivers, at least I think so.

And I dont have third party antivirus program, only defender, which I shut off before update.
Run update with clean boot and gone though several suggestions how to install w8.1

like this one:
Windows 8.1 Update Error 0xC1900101-0x40017 on Dell XPS 18
But I still got error message 0xc1900101 - 04000d after restarting my computer when installation freezes( screen goes black after restart when setup applied pc settings.

Any suggestions? Or I need to provide more info?

A:Error 0xc1900101 - 04000d after w8.1 install from store

Ok, I get 8.1 into system.

I downloaded iso file with Os installation, and run setup only with saving personal files.

Read other 1 answers
RELEVANCY SCORE 53.6

Auto security update seems to have created error code C0000142 and saying unable to access (?) as well as volume on computer no longer works - now what folks?  Many thanks as always.

A:windows 7 home 64 bit dell PC update failed caused error code

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 1 answers
RELEVANCY SCORE 53.2

I have an Inspiron 13 7000 series 2-in-1 and i frequently lose sound after system updates. Normally I just uninstalled the Conexant SmartAudio component and driver, reboot and the new driver magically appears. Not so this time. So I went to Dell to find the right driver. They require I install their System Detect software but I get an error message (see below). Any help is greatly appreciated.
Thanks!
PLATFORM VERSION INFO Windows : 10.0.15063.0 (Win32NT) Common Language Runtime : 4.0.30319.42000 System.Deployment.dll : 4.7.2046.0 built by: NET47REL1 clr.dll : 4.7.2046.0 built by: NET47REL1 dfdll.dll : 4.7.2046.0 built by: NET47REL1 dfshim.dll : 10.0.15063.0 (WinBuild.160101.0800)
SOURCES Deployment url : downloads.dell.com/.../DellSystemDetect.application Server : Microsoft-IIS/8.5 X-Powered-By : ASP.NET Deployment Provider url : downloads.dell.com/.../dellsystemdetect.application Server : Microsoft-IIS/8.5 X-Powered-By : ASP.NET Application url : downloads.dell.com/.../DellSystemDetect.exe.manifest Server : Microsoft-IIS/8.5 X-Powered-By : ASP.NET
IDENTITIES Deployment Identity : DellSystemDetect.application, Version=8.5.0.4, Culture=neutral, PublicKeyToken=831211ca63b981c5, processorArchitecture=msil Application Identity : DellSystemDetect.exe, Version=8.5.0.4, Culture=neutral, PublicKeyToken=831211ca63b981c5, processorArchitecture=msil, type=win32
APPLICATION SUMMARY * Installable application. * Trust url parameter is set.ERROR SUMMARY Below is a summary of the errors, de... Read more

A:No sound after Windows 10 update AND I get an error message when I try to install Dell System Detect

opal875Inspiron 13 7000 series
What is the model number please?

Read other 1 answers
RELEVANCY SCORE 53.2

Hello to all,

bought a new Sattelite Pro C850-1MX (PSCBZE 00M009GR) in december 2013. System is running almost unchanged to delivery state. Yet installed OpenOffice, Firefox and AdobeReader in most actual versions. And updated driver for AMD-GPU to latest version. No other changes done.

Now tried to upgrade to Windows 8.1 via Windows-App-Store. Download was done, upgrade run, reboot, installing changes, preparing devices --> reboot, rollback to 8.0 with error code 0xC1900101-0x30018.

Searched internet for solutions: Toshiba sais
- update all Toshiba-components via TOSHIBA Service Station --> done
- (Link: [http://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/]): deinstall some components: esp. LAN/WLAN-driver.

Hmmm...if I do so I cannot access Windows App-Store to rerun the upgrade because i have no network-connection. Stupid...

- Why can?t I upgrade an almost unchanged system because of some driver-uncompatibilities where i didnt change anything from delivery state???

Please state any hint/solution. Thanks!
Mark

A:Satellite Pro C850-1M - upgrade to Win 8.1 fails - error 0xC1900101-0x30018

>Now tried to upgrade to Windows 8.1 via Windows-App-Store. Download was done, upgrade run, reboot, installing changes, preparing devices --> reboot, rollback to 8.0 with error code 0xC1900101-0x30018.

This error message appears because of some not compatible drivers and tools which are already preinstalled on Windows 8 system.

This issue has been reported many times here in the forum and was solved as reported by user harrie_1 at 12-Jan-2014
Look into this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

Check what drivers has to be uninstalled in Appendix A
[How to Update from Windows 8 to Windows 8.1|http://support.toshiba.com/sscontent?contentId=4003162]

+What important is to remove the internet connection.+
+Only use to download 8.1 then disconnect (also Lan cable)+
+After starting Win 8.1 for the first time do not connect to the internet.+

+On another pc download first the drivers for 8.1 audio,realtek wlan and bluetooth and display driver.+
+Install and restart after this when de system is stable you can connect to internet and download the windows updates.+

PS: this thread should be closed to avoid misunderstandings and because other thread already exists

Read other 2 answers
RELEVANCY SCORE 51.6

Hello,   I have been trying to upgrade my IdeaPad 110 to the New Windows Insider Preview Version 17063. I can't get past the 2 reboot Error Code 0xc1900101I have been told to Disable Virtualization, which is already disabled and AppGuard, which I don't see in my BIOS. The only thing I have in my BIOS is Intel Platform Trust Technology & Secure Boot, which I have disabled. I have been trying to upgrad 10 x and the same problem happens. Anybody else having the same problem? Is there an AppGuard in BIOS?

Read other answers
RELEVANCY SCORE 50.4

Hello,

I have a problem with installing Windows 10 (either upgrade or clean install). I think the problem has started 2.5 years ago when suddenly Windows 8 stopped installing updates. I think it stopped installing updates after the Windows 8.1 upgrade through the store has failed.

Just about a month ago, updates resumed and a bunch of them were installed. But after several days, one security update has failed to install and Windows update is stuck at this point.

I decided last week to upgrade to Windows 10. Direct upgrade wasn't possible because I have o upgrade to Windows 8.1 first, which I can't. So I have created a clean install media on USB using the media creation tool. I plugged in the USB, shut down then started and selected the USB drive as first choice for booting. It brought the Windows logo, and 1 minute later, the laptop shut down. I repeated the operation twice with the same result.

I tried then to do a clean install of Windows 8.1 from another USB, but shortly after the logo, instead of shutting down, I got a light blue screen with "something went wrong" message and the machine restarted.

Then I decided to run the USB that have Windows 10 from Windows. I selected to remove every thing and proceeded. The process after that went slow increment of 1% took about 10 minutes. Then I got the first restart, and it went the same as it shut down. I started the laptop and it went again to Windows 8. After I logged on, I got the following message:

We couldn'... Read more

Read other answers
RELEVANCY SCORE 50.4

Hey guys,

I've been having a problem with upgrading to Windows 10. I've tried using the tool both by running it on my PC and putting it on a USB. It gets through the first part of copying files and does the first reboot, then it starts back to the screen and the Installing Features and Drivers sits at 0% for a few seconds then resets and restores my old version with this error:

0xC1900101 - 0x30018 - The installation failed in the FIRST_BOOT phase with the error during SYSPREP operation.

When I originally looked this error up I read that it might be an encryption error so I decrypted both of my drives, ran the install again.. Same error. So now I am at a complete loss as to what to do so I can get myself upgraded.

System:

Windows 8.1 Pro x64
Mobo: ASUS ROG Maximus VII Hero
PCU: Intel i7 4790k 4.00 GHz
GPU: ASUS ROG MARS760x2 (2 GTX 760 chips on one card)
RAM: 16GB DDR3

Please let me know if you have any info or advice as to how I can fix or workaround this issue.

Thanks,

Hoffmann

A:Windows 10 Upgrade Failure - 0xC1900101 - 0x30018

I am having exactly the same problem, I am installing from USB onto Windows 8.1 Pro, as the administrator (local) outside of the normal domain. It gives no warning of this error until it has been through most of the install, I have tried multiple times same issue occurs.

Read other 4 answers
RELEVANCY SCORE 50.4

Everytime I try to update my computer to windows 10, I get the same error occurring. Ive tried multiple methods but I can not get around it. Downloading it works, but once the installing gets to the first re-boot, the machine hangs with the dots that are meant to be going in a circle just freezing. Nothing happens no matter how long I leave it for, so I have to hard-reset. Once I done that it tries to recover the installation but the same thing happens again so then it just sets me back to windows 7.
 My computers model is Alienware_Aurora_R3
Attached is the error message I get when I am rolled back to Windows 7. 
Ive tried looking online for solutions but cant find any that work for me so far. Any help? 


A:Windows 10 Failed to Install 0xC1900101 0x30017

I have the same PC and the exact same error occurs on my system.  i spend two hours with Microsoft Tech support on the phone to no avail.  I have no idea what to do about except stay with windows 7 which works just fine.

Read other 3 answers
RELEVANCY SCORE 49.2

After a failed Windows 10 Update, the laptop will not boot. I tried SAFE MODE and since then the machine just stays black. I cannot get it to boot!!
I have tried:
- Holding down power 10 seconds and trying again.
- Spamming F12, F8 keys to no avail.
- Holding CTRL+ESC and then plugging in AC and still nothing! Just a black screen!
Please help me! Machine is well out of warranty now.

A:Dell XPS 9550 Black Screen, no Dell logo after failed Windows 10 Update

Can anyone help me on this?

Read other 7 answers
RELEVANCY SCORE 49.2

After a failed Windows 10 Update, the laptop will not boot. I tried SAFE MODE and since then the machine just stays black. I cannot get it to boot!!
I have tried:
- Holding down power 10 seconds and trying again.
- Spamming F12, F8 keys to no avail.
- Holding CTRL+ESC and then plugging in AC and still nothing! Just a black screen!
Please help me! Machine is well out of warranty now.

Read other answers
RELEVANCY SCORE 48.8

This x64 system was upgraded from Windows 7 Ultimate in August 2015. All the patches and updates have been applied successfully. I have eliminated all but one error. I have been working on this for days. I would appreciate any help resolving this error:

2016-08-24 15:35:51, Error MOUPG CInstallUI::GetDefaultLanguage(1715): Result = 0x80070002[gle=0x00000002]
2016-08-24 15:43:43, Error MOUPG CSetupManager::GetDUSetupResults(5249): Result = 0x80070490

Read other answers
RELEVANCY SCORE 48

I am trying to take back up of the files from my Laptop.
I used it for 2-3 days. 
Stages followed. 
I connected my laptop with a hard disk.
1. Welcome
2. Factory recovery media. After starting the application, following error poped up:an error occurred while creating the factory recovery media dell
3. Data back up to hard disk. No issues for this point
4. Finish

A:New laptop 5558 Windows 8.1 Dell recovery and Back up, Error: an error occurred while creating the factory recovery media dell

Hi,
Thank you for writing to us!
Kindly click on the following link:
https://www.dell.com/support/home/us/en/04/media
This link will give all the information as to how you can use Dell backup and recovery and if there are any other issues with the same.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 47.6

Recently Windows updated my Intel HD Graphics 630 driver. A few days later the same driver was released on Dell's driver support page.
Is there any correlation between Windows Update and Dell's drivers? Who does update the drivers Microsoft themselves or Dell needs to release the driver to Microsoft?
As this is the first time when Windows updated the driver is this how the Intel HD Graphics drivers are to be kept up-to-date via Windows Update?

A:Windows Update vs Dell Update - Intel HD Graphics 530/630 Driver

ZINGAM,
Referring to the Intel HD graphics driver.
Windows gets code from Intel for the driver and they will implement it in the OS. Dell also gets code from Intel and will release it. Also, Intel will post the driver on their site to download. You can uninstall the Microsoft driver if you choose and install the Dell update driver. 

Read other 2 answers
RELEVANCY SCORE 47.6

Hello, 
I've noticed broken fonts in Dell Command Update on my Latitude E6440, so I can neither update software or drivers nor uninstall command update. 

Could anyone help me resolve this issue? 
Additionaly, I have WiDi issues, but I'd like to resolve them by driver update. Unfortunately, I can't update anything using provided utility due to broken GUI.

A:Can't update, repair or uninstall Dell Command Update on Windows 10

victor.istomin,Thank you for notifying us about this issue. I have sent an email to the drivers team to resolve the page. For me to better assist in troubleshooting, please click my DELL-Jesse L and send me a Private Message with the Dell Service Tag number and your Dell Order number.You would click my name in blue, then on the next page in the upper right corner, click the words "send private message"

Read other 1 answers
RELEVANCY SCORE 47.6

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore. I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.I really would appreciate help. 

A:Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

 
Got it !!!!
If You are using notebooks with with hard drive larger than 700 GB you probably should update Intel Rapid Storage Technology Driver.
Here is solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product
Download and install it.

Read other 97 answers
RELEVANCY SCORE 46.8

ASUS Desktop PC CM6850 Series
Windows 7 Home Premium SP1
64-bit
Core i7
4GB RAM
500GB HDD
Windows updates not working for a while. Initial was 8007370B appearing in the Windows Update window when searching for updates. Found bad memory using Memtest86+ and pulled the stick. Other stick no errors after 8 passes.

Toshiba HDD installed. Ran two different HDD diagnostics test on it and it passed.

No conflicts in device manager.

Now, Windows Update window showing 80070002 error. Based upon instructions, ran System Update Readiness Tool (SURT) but that appears to have not made any resolution. Ran it twice to ensure it ran successfully.

Then, ran the Windows Update Diagnostic.diagcab from go.microsoft.com/fwlink/?LinkID=231149 and it shows Windows Update error 0x8007370B(2014-09-18-T-06_58_30P) as NOT FIXED. All other items in list shows as FIXED.

SFC /scannow will not run ... displaying the message "windows resource protection could not perform the requested operation". I tried the same in a elevated prompt in normal windows and in safe mode with the same result. No luck running Surface Scan.

Ran chkdsk /r twice also.

Screen captures of both errors and CBS log file attached. Any help is greatly appreciated. In the meantime, I will begin running some antimalware scans just in case.

Thanks for any assistance.

A:Windows Update Error 80070002 & Windows Update Diag Error 0x8007370B

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

We need that data whether or not either CheckSUR or SFC complete.

Read other 9 answers
RELEVANCY SCORE 46

OS: Windows 8.1 64-bit.
I am having battery problems.
I currently have BIOS version A05 (3-jan-13).
I have downloaded the update A14 but when i am installing it,
It gives error message 'allocate memory for security flash failed!'.
My drive where windows is installed i have only 4.7GB of free space.  Could it be because of this?

Read other answers
RELEVANCY SCORE 46

OS: WINDOWS 8.1 64-BIT
i am having a battery problem so i am wanting to update my BIOS to troubleshoot it.
My current BIOS version is A05 (3-jan-13).  I want to update it to A14.
But i am getting ther error message 'allocate memory for security flash fail!'
The drive where windows is installed has only 5GB of free space.
Could it be becausr of this?

A:Dell Inspiron 15R 5521 BIOS update error.

No -- 5G is more than enough free space for a BIOS flash.  Is the system failing to recognize the AC adapter (F2 at powerup to check)?
If it is, the BIOS won't flash - this is a hardware problem a BIOS update won't fix -- either the adapter, the DC jack or the mainboard is bad.

Read other 4 answers
RELEVANCY SCORE 45.6

When I try to install KB3182373, a "Security Update for Microsoft Silverlight", Windows Update reports failure with the message "Code 643 Windows Update encountered an unknown error".
I ran WindowsUpdateDiagnostic.diagcab. It reported that "Troubleshooting couldn't identify the problem".
What can I do to fix this? I'm running Windows 7 Professional.

Read other answers
RELEVANCY SCORE 45.6

I try Dell Celeron CPU but i chang it to CPU i3 3225 and use dual ram KingsTon 2G buss 1066 use normal. Now i check update and have newest bios and update. machine report update sucessfull and reboot. But machine not boot only Led blue power and 3 4 led code. Please help me fix it !

A:Help me ! Dell optiplex 3010 sff update bios A17 not boot error led 3 4

Did it work with the i3 after you upgraded the CPU, before you ran the BIOS update? And which BIOS update version did you run?
Is power button steady blue or blinking?
If you reboot and immediately press F2, can you open BIOS setup? If you can, copy down all current settings because you may need them later.
3-4 is a RAM error so try this:
Power off and unplug
Press/hold power button for ~15 sec
Open case and remove motherboard battery
Press/hold power button for ~30 sec
Carefully reseat RAM modules in their slots
Reinstall battery
Close up and see if it boots now
If it still won't boot, repeat the process, but remove the module from slot B1, leaving only the one in slot A1.  Then repeat again but swap the other RAM module into slot A1 to see if you can find a bum module. If they both work in slot A1, repeat the process and add the 2nd module to slot B1 to see if there's a bum slot.

Read other 1 answers