Over 1 million tech questions and answers.

Current Po-Ting's configuration

Q: Current Po-Ting's configuration

Here is my current configuration. Is there is anything to improve?

Preferred Solution: Current Po-Ting's configuration

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Current Po-Ting's configuration

In my opinion you are well protected .keep in mind we buy system to do certain things not just to install security software

Read other 0 answers

Well, this was my standard setup so far. As I'm planning to upgrade to W10 soon, I want to expand/alter this accordingly. Especially after a company I work for has had a close encounter with Locky Ransomware. I am hoping to learn a lot from more experienced users here.

That's it for now.

Best Regards,

A:Predrag's current configuration

Nice setup, however you can consider setting UAC to max and OS updates to "automatic".
My second thought is Admuncher - do you really need it since you have uBlock Origin? Isn't AdMuncher a dead product?

Read other 1 answers

I am going to upgrade my current pc configuration, before doing so I thought I should hear soem opinions from other people, so here we go.

My current pc:

PSU: Cooler Master Silent Pro 700W (840 max) Modular
Motherboard: Gigabyte EP43-S3L
CPU: Intel:E7200 Core2Duo 2x2.53
Ram: Kingston:2x2gb 833mhz
GPU: GTX 560 ti
Soundcard: None
Storage:1x250gb(windows), 1x200gb, 1x1tb, 1x2tb
Case: Cooler Master 690II
Cooling system: cpu stock, gpu stock, cm690II stock (one fan on the back)

Other possibly related components:
Monitor: SM P2370HD
Mouse: G5
Keyboard: G11
Headset: Siberia v2
Speakers: X540

My budget is 700eur, so here is what I was thinking, while having in mind that I will be using this pc mainly for:
-Video encoding (x264)
-3D modeling
-Running more virtual machines

Any thoughts of upgrading maybe some other part, or using something different?
Any advice is appreciated!

Read other answers

Finally got time to do my config!
I use Macrium Reflect to do weekly backups, Hostman to block ads & Nasties etc, I only download from reputable sites

A:Andytay70's Current Configuration

You're safe. Isn't AVAST premier on top of COMODO, MBAE, MBAM real-time a bit overkill, though? CIS + MBAM and Crystal Security/Zemana on-demand is quite a bit of malware prot by itself. Thanks for sharing your config.

Read other 2 answers

Here is my current configuration. Is there is anything to improve?

A:potinglin's current configuration

In my opinion you are well protected .keep in mind we buy system to do certain things not just to install security software

Read other 7 answers

I tried to find the current system configuration on Dell's support web site for the OptiPlex 755 I recently inherited. However, after running this web based application, the only result available was the original system config as it shipped on the date of purchase. Selecting "current configuration" caused the "system detect" app to run, which brings me back to the original config tab.
I accessed dell . com using IE 11 with no addons running. Does anyone know why dell's app will not report the current config?  I am unable to open the box, so please do not suggest that or any solution that does not involve resolving the issue with Dell's support web site.

Thanks in advance,


A:OptiPlex 755 Current Configuration Fails

None of that hardware or software is supported anymore.  What exactly are you looking for? You can in fact get these systems with windows 10 pre installed.
BIOS should be done via DOS or XP.
A22 is recommended for newer OS.

Supported OS
Dell Optiplex 755 System BIOS A22This package provides the BIOS Update for Dell OptiPlex 755 running the following Operating Systems: Windows and DOS.More details

DELL,DSK PROG,BIOS,OPTI-755,,A21OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A19This package provides the BIOS update for Dell Optiplex 755 running the following Operating Systems: Windows and DOS.More details

Dell OptiPlex 755 System BIOS, A17OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A16OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A15OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A14OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A13OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A12OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A11OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A10OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A09OptiPlex 755 System BIOSMore details

Dell OptiPlex 755 System BIOS, A08OptiPlex 755 Sys... Read more

Read other 3 answers

Hi guys,
I've been fooling around with audio editing lately, and I'm just curious if Audacity's a good addition to a computer that has Sound Forge 10 Audio Studio installed. Will the difference in features between the two take care of different things? Or is it just kind of a repeat? Many thanks.


A:question about adding Audacity to my current configuration

I don't have Sound Forge 10 Audio Studio. (looks like a really cool program). Should have good Sony support. I use Audacity for editing and making mp3's and mp4's it is simple and works.The Audacity support is a forumI think I would use the Sony if I had it.

Read other 1 answers

I just received an E6420 billed as an i7-2720QM, 4 Core CPU.  I'm almost certain that when I viewed the BIOS it also identified as such.  
I upgraded the BIOS from A01 to A05, and then form A05 to A24.  Now, the machines current configuration identifies the CPU as an i7-2640M 2 core CPU, but with a -4 appendix, as if the machine knows it has 4 cores.  I would like to know once and for all what I actually have without disassembly. 
Service Tag <Service tag removed>
Thank You

Read other answers

Isn't it insane how expensive memory testing equipment is..?

Well, I was wondering if anyone knows of some alternative to the Simcheck or the Ramcheck machines.

A:Memory te$ting equipment

This is free but only works with W95/98:


Read other 2 answers

When I first installed Windows 10 I really liked it....but recently, my computer seems to be running much slower and at times freezes up for 30 or 40 seconds. Boot up and shut down seem to take forever, but when I want to go to sleep....it is instant. Anybody have any suggestions or ideas? I'm seriously considering going back to 8.1

A:Is Windows 10 get?ting slower and lazier

Welcome to the forums seasickseagull. Have you installed programs recently, then experienced the slowdown/freezes? Check your event viewer and see if it shows errors.

Read other 20 answers

Okay im a noob when it comes to VBscript, but here is what i need:

i need a .vbs that can open a dialog box to select a file (or multiple files) and return the path and filename to "GetFilename".

This is what i have tried:

WScript.Echo BrowseFile( "C:\", "TempImage files (*.img)|*.img" )
' WScript.Echo "Selected file: " & GetFileName( "", "Text files|*.txt" )
' WScript.Echo "Selected file: " & GetFileName( "", "MS Office documents|*.doc;*.xls;*.pps" )
' WScript.Echo "Selected file: " & GetFileName( "C:\WINDOWS", "Bitmaps|*.bmp" )

Function BrowseFile( myDir, myFilter )
' This function opens a File Open Dialog and returns the
' fully qualified path of the selected file as a string.
' Arguments:
' myDir is the initial directory; if no directory is
' specified "My Documents" is used;
' NOTE: this default requires the WScript.Shell
' object, and works only in WSH, not in HTAs!
' myFilter is the file type filter; format "File type description|*.ext"
' ALL arguments MUST get A value (use "" for defaults), OR otherwise you must
' use "On Error Resume Next" to prevent error messages.
' Dependencies:
' Requires NUSRMGRLib (nusrmgr.cpl), available in Windows XP and later.
' To use the default "My Documents" WScript.Shell is used, which isn't
' available in HTAs.

... Read more

A:File open dialog box ting (ima nooooob :3)

Crap. can a mod change 'ting' to 'thing' in the title if they get a chance?

Read other 1 answers

That's what happens to me two restarts after installing/reinstalling the Forceware drivers for my MSI 7950GX2, every time.

Here's the system in question:

Intel Core 2 Duo E6600 @ 2.4GHz (stock) cooled by Big Typhoon
ASUS P5N32-E SLI Plus motherboard @ 1066MHz FSB (stock), no active cooling, just heatpipes
Two sticks of pqi TURBO 2GB DDR2-667 4-4-4-12 @ 1T, stock clocks
40GB Seagate Barracuda IV PATA HDD (test installation of OS and a couple games)
MSI NX7950GX2 in the top PCI Express x16 slot.
Thermaltake Purepower RX 600W - 4x +12V rails
My air-cooling setup keeps the CPU at around 28-32C when idle, depending on room temperature.
The system is running Microsoft Windows Server 2003 x64 Standard Edition, with Service Pack 2 freshly installed.

I only have one 7950GX2, and I have *never* been able to get "Multi-GPU configuration" to actually show up under "Manage 3D Settings" in the NVIDIA Control Panel. I've recently flashed to the latest BIOS for my motherboard, and I can always reproduce the error in either PCI Express x16 slot. There are no other cards besides the audio riser card.

I've tried using only one 2GB stick of RAM and then installing the Forceware drivers, and I've tried it with relaxed timing (5-5-5-15) as well.

I've also tried using all three of the 6-pin PCI Express connectors that the power supply offers. Each one works off of a different rail. No differences noticed. Each +12V rail on the ... Read more

Read other answers

Bioflex Pro ting cable w Bioflex Pro h V handle and Mil Bioflex Pro ary Press w Bioflex Pro h dumbbell type Arnold . 4 Biseries of Pulleys in pulley w Bioflex Pro h closed and supinated grip for Back and Pulls in pulley w Bioflex Pro h open grip and in front also for the backs. Tuesday - Chest, arms and lumbar 6 Biseries of Press inclined w Bioflex Pro h dumbbells for chest and Funds to the muscular failure in

Read other answers

OK, simply put I'm sick and tired of other programs running in the background hijacking my current window.

ie: I start a process in one window that may take awhile, switch to something else to work on... when the background process is done, depending on the program, it will often force itself to the front. VERY frustrating when you're working on something else, then some background task decided "No, I'm going to take you out of that form box your typing in because I'M coming to the front".

Is there a setting anywhere that can stop background program from hijacking the current window you're working in?

Read other answers

I need to set up three user accounts on two computers the accounts on each computer is going to be monitored.
Each user will be assigned access for certain folder or files and certain applications, like internet explorer.
And all usb ports and dvd drive will be blocked. Only the admin will be allow to have full access.

So i need to do something that allow ( managers) to monitor employees activity on the system during working hours.

On one pc is windows xp pro on the other os windows 7 home premium.

Any idea how i can acomplish this task?

I.was thinking of group policy on both computers but on home premium there is not group policy.

Also the users will be using almost all the same programs and files just the with different information.

Thank you in advance.

A:group policy configuration and computer configuration question

Read this
But for Windows 7 Home Premium you will not have the
Local Security Policy so you may need to upgrade to Windows 7 Pro for that.

This is easier to control with a server like Windows Server 2003 or 2008.

Read other 2 answers

I have an old P3 system that I let my son use for internet browsing, email, etc. It has been rock solid for 6+ years until lately and I think the issue of not booting properly is that the master CD-ROM gave up the ghost. And so I took that out hoping that is all it will take.

Here is my question (and I feel so much like a noob; I did try to google but I got nothing): Where do I place the tab to take it from slave to single configuration? As slave the tab was placed on the far left in the verticle position. Am I correct in that to make it singular I need to place it horizontally on the bottom two prongs center-right?

I hope I am making myself clear. This is an old system and it has been years since setting it up and I don't have my manuals anywhere. I couldn't even access Buslink's website.

Thanks for your help.

A:CD-RW Configuration - from slave to single configuration?

The jumper will fit on the pins, based on what is imprinted or embossed on the drive. It is usually very difficult to see... but if you use a flashlight or other device you can place at different angles, you can see how the jumper choices are stamped into the metal. Most often the center two are Slave, the right is Master, and the left is Cable Select.
I suggest you jumper it as master.
If it is a known brand, you can find a drawing on the website of the optical drive manufacturer.

Read other 1 answers

I apologize if this is not the right section, this seemed to be the most suitable.
I am using a 3D Connexion mouse and when I try to execute an executable file for the software configuration, I get the following error?
"Exception: Unable to cast object of type 'System.Configuration.Internal.ConfigurationManagerInternal' to type 'System.Configuration.Internal.IConfigSystem'"
I've talked with the mouse vendor and they have no idea.  My OS is Win7 64.  Does anybody know what this is?

Read other answers

Can't get rid of the Admilli Service which I don't think should be there. Also, this line - O4 - HKCU\..\Run: [Tsa2] C:\PROGRA~1\COMMON~1\tsa\tsm2.exe
doesn't look right but can't tell. Plus, can't get rid of the Trusted Sites listed. I have tried to fix through hjt and they keep coming back. Have tried to delete them from IE but they won't go away. I have run Norton Antivirus, Pest Patrol, Spybot and Adaware and removed the items each found. Norton found no virus.

Please help, Thanks

Logfile of HijackThis v1.99.0
Scan saved at 9:07:28 PM, on 12/23/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Admilli Service\AdmilliServ.exe
C:\Program Files\Admilli Service\AdmilliKeep.exe
C:\Program Files\Palm\HOTSYNC.EXE
C:\Program Files\Microsoft Office\Office\1033\msoffice.exe
C:\Program Files\Norton SystemWorks\Norton AntiVirus\navapsvc.exe... Read more

A:Once again - here is current hjt see below

Please do not post multiple threads for the sam problem. Continue here:


This thread is closed.

Read other 1 answers

i don't seem to be having any problems but if someone could take a look at my file just to make sure...thanks

Logfile of HijackThis v1.99.1
Scan saved at 11:19:24 PM, on 8/7/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473)

Running processes:
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
c:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Java\jre1.6.0_02\bin\jusched.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Documents and Settings\HP... Read more

A:My current HJT log

I don't see any malware in this log, but I see no evidence of an AntiVirus program on your system. This must be resolved. Connecting to the Internet without antivirus protection is a "Welcome" doormat for malware. It can take as little as eight seconds to infect an unprotected computer.

Here are a few very good free Antivirus products which are available:Avast!
Avira PersonalEdition Classic
Select one of these, or another of your choice. Do not install more than one antivirus program because they will conflict with each other. It is imperative that you update your antivirus software at least once a week (even more if you wish). If you do not update your antivirus software then it will not be able to catch new malware that may have come out.

Read other 1 answers

Logfile of HijackThis v1.98.2
Scan saved at 9:00:02 AM, on 12/19/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Multimedia Card Reader\shwicon2k.exe
C:\Program Files\BroadJump\Client Foundation\CFD.exe
C:\Program Files\Visual Networks\Visual IP InSight\SBC\IPClient.exe
C:\Program Files\Visual Networks\Visual IP InSight\SBC\IPMon32.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\interMute\SpySubtract\SpySub.exe
C:\Program Files\SBC Self Support Tool\bin\mpbtn... Read more

A:Most Current Hjt Log

CWShredder http://www.intermute.com/spysubtract/cwshredder_download.html
Close all browser windows, open cwshredder.exe then click "Fix" and let it run.

Then restart your computer.

SpywareBlaster http://www.javacoolsoftware.com/spywareblaster.html
AdAware SE http://www.majorgeeks.com/download506.html
SpyBot S&D http://www.safer-networking.org/en/download/

DL them (they are free), install them, check each for their definition updates and then run AdAware and Spybot, fixing anything they say.

Post a new log

Read other 3 answers

I have upgraded my rig since I was last here quite a bit, here you go

E6300 2625Mhz L629A B2 (Best4ghz+ E6300 stepping) Lapped to a mirror
TMG i1 CPU Cooler
ABIT IB9 (Maxes 375 FSB stable
XION XON-103 Case and PSU
4x1GB of DDR2-800 4-4-4-12 at DDR2-750 4-4-4-8 2v G.Skill PK
Vista Business 64-bit
eVGA 7800GT w/ Accelero X1 515/1200mhz

So what do you think, I want ABIT to release a new BIOS for a higher FSB.

A:Current Rig

The B week stepping are better than A week....

Read other 11 answers

I get this message on boot up - USB over current status detected, shut down in 15 secs.
And it does. What's it need, new power supply?

A:Over current

Apparently this is a common problem. Below is a link to a general set of solutions to try, including checking the grounding on the case, changing the BIOS, and checking the jumpers (apparently on some of the ASUS motherboards, there is a jumper that allows you to keep USB power flowing even if the system is shut off).

Read this.


Read other 3 answers

Hello, a few days ago, I purchased computer parts off of amazon. My parts will be here soon, but I forgot one thing..... the CD rom. I know that this isn't a necessary part for a computer in all cases, but I need it for my Windows 7 disc I have. I do not want to buy a new windows so the best way for me would be the CD. The computer I have right now is a Dell Inspiron desktop. So I was wondering if I could simply use the CD rom in this computer for my new one. And if I can, is there anything I need to know before taking it out of the computer? I would also appreciate it if someone could tell me or give me a link to how to install it. I know how to install everything else. If you need to know which parts I am getting I will be glad to tell you. Thank you!

A:Can I use the CD Rom in my current pc for my new pc?

As long as the new computer has a parallel ata interface (the wide flat-band connection) the older cd-rom drives should work. Most operating systems have standard drivers to work with them.

Read other 1 answers

I'm building a gaming comp and i've been looking at amd's line of dual core processors (i am currently considering the 4400+ toledo). While dual core sounds great for multitasking i wonder at the relatively low speeds of the current processors (2.2-2.8 ghz, although overclocking them is supposed to be easy) and how they will run processor hungry games in the future. Is it worth waiting till a faster dual core processor comes out (or just get an athlon fx), or will games run fine with the current ones (i'm thinkin battlefield 2 and doom 3). Also, is paying up for the 2*1mb cache worth it? Thanks a lot.

A:Current Amd X2's

Read other 6 answers

Well I was playing some good old Minecraft with a friend and then my computer was about to die so me being stupid got quickly to put it on the charger. When I got up, i bent the usb connector for my headset. and the it said something along the lines of "over current" and now that usb port doesn't work. the other two do so its not my motherboard i dont think..

So basically I would love to know why its not working and if there is anyway to fix it without changing my motherboard.

Dell Inspiron 15R
Intel i3-2310m Dual core

A:Usb Over-current?

Sounds like a faulty port. Likely the internal pins are shorted/damaged, thus the error. Lucky the whole USB controller didn't fail. If you need additional ports, you could install a USB controller card.

Read other 1 answers

After my bios(1701) posts i am prompted "USB Over Current Detected System Reseting In 15 Seconds, Please Remove Over Current USB Device". This happens even with no USB devices connected to my rig. I have checked there are no shorts or components touching anywhere nere any of my USB ports. I can get the system to run by disabling the error reporting in my bios. But can anyone tell me why this is happening? Is it a false positive? Is this problem common with my board(ASUS P5N32-E SLI)? Is it safe/advisable to run my system with the error repporting tunned off? Sandrasoft and Everest all report everything fine regarding all my USBs. My specs E8500 3.17Ghz, ASUS P5N32-E SLI, ASUS EN9600GT, 4Gb DDR2 677Mhz, Trust 570W PRO PSU, Artic Frezzer Pro 7 fan.

A:USB Over Current

Did some searching in Google, apparently this can be caused by a missing jumper on the motherboard. You might want to check that first.

Read other 13 answers

i don't work on mycomputer, i just aim, and play games, so what don't i need and what is bad?
Logfile of HijackThis v1.98.2
Scan saved at 1:46:53 AM, on 9/2/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Norton Internet Security Professional\NISUM.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\Microsoft Hardware\Mouse\point32.exe
C:\Program Files\Adaptec\Easy CD Creator 5\DirectCD\DirectCD.exe
C:\Program Files\Norton Internet Security Professional\ccPxySvc.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXE
C:\Program Files\Free Downloads Accelerator\fdaagent.exe
C:\Documents and Settings\me\Local Settings\Temp\Temporary Directory 2 for hijackthis.zip\HijackThis.... Read more

A:my current hjt log

Read other 7 answers

I am a 96 year old man and this is a memory problem. (I mean my private memory, not the computer?s). Using the computer I forget often the current date, the day and sometimes even the hour.
My computer works on WinXP Professional system (Hebrew enabled) with 800x600 screen and a two-lines taskbar on the bottom of the display.
On the end of the taskbar is a notification area where I can see the current hour an the name of the current day, but not the current date. In order to see the date (dd/mm/yy) I must move the pointer to the notification area and then, but not always, the date appears.
Is there a way to configure the notification area so that all three info?s (day name, date and hour) appear constantly on the taskbar?
Please advise.
Tech Support Guy System Info Utility version
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz, x86 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 3485 Mb
Graphics Card: Intel(R) HD Graphics, 1024 Mb
Hard Drives: C: 146 GB (112 GB Free); D: 319 GB (279 GB Free); G: 465 GB (353 GB Free);
Motherboard: Gigabyte Technology Co., Ltd., H61M-S1
Antivirus: Avast Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Read other answers

Hey guys,

I'm thinking about building a new computer, but using my current 60GB HDD and DVD/CD-RW Drive with it.

Can I use my current HDD on a new system without any problems? When I install the new WinXp, will it format the HDD back to normal or will it screw up?

Thanks if you can help me out :grinthumb

EDIT: I'm not worried about keeping any data, just being able to actually use the drive. Just incase you needed to know or not. :knock:

A:Possible to use current HDD in new PC?

So long as you make sure to delete all your partitions and then reformat there shouldn`t be a problem.

The reason you will have to do the above is because your HDD will have all the drivers for your old mobo on it and wont work with your new system because of this.

Regards Howard

Read other 2 answers

Hello again,

I've finished overclocking my new system and now have settled for 4.5GHz which is rock stable.

My settings are as follows:

(BIOS Ver 1902)

AI Tweaker:

AI overclock Tuner = Xmp
BCLK Freq = 100.00
ASUS Multicore Enhancement = Auto
CPU Core Ratio = Sync all Cores
1-Core Ratio = 45
DDR Freq = DDR4-2400 MHz
TPU = Keep Current

AI Tweaker/DIGI+ VRM:

CPU Load-Line Calibration = Level 6
CPU Power Phase Control = Optimised

AI Tweaker:

CPU Core/Cache Current Limit Max = 255.50
Min Cache Ratio = 45
Max Cache Ratio = 45
CPU Core/Cache Voltage = Manual Mode
- CPU Core Voltage Override = 1.260

All other values are set = Default or Auto

Real Temp GT 3.70 used to record temps.

Idle temps are 21 - 24
Full load temps of 68 - 71 while running P95 v28.9 build 2 for over 5 hours using the following to achieve maximum heat production:

Set the Min FFT and Max FFT size to 8 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref: http://overclocking.guide/stability-...with-prime-95/
Tested the overclocks stability using the following settings which was over 9 hours (while I was at work):

Set the Min FFT and Max FFT size to 1344 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref: http://overclocking.guide/stability-...with-prime-95/
I welcome any and all advice you may have



Read other answers

I bought a mini laptop hp from someone and it goes to black screen saying enter current password but the ones that some people told me to put in some of the letters and numbers won't go on like it won't key in so I'm at a loss and the person I bought it from won't return my calls

A:current password

Hi: Enter any BIOS password 3 times and see if the PC generates a system disabled (halt code). If it does, post the code.

Read other 2 answers

I currently have a C2D E6300 and I am going to do a system upgrade. I am curently debating wether to buy a new processor or OC my current one with a new mother board. I have a Dell system right now so I can't OC right now. I am thinking about getting the C2D E6750 Conroe or the E6600 Conroe. Do you think I should use my current C2D processor with a new mobo or get a new one? Any help/suggestions would be greatly appreciated.

A:get a new processor or OC my current

You won't notice much of a difference with that minor change in processors, I'd suggest sticking with the 6300 until next year and see what things look like then. Once you get rid of the dell, get a decent mobo, ram and video card, you should notice a fairly decent improvement, but the cpu is basically throwing away your money for a slight gain.

Read other 1 answers

Just found this site that will let you test the version of your browser add-ons, to make sure they are up to date. Why not give it a try to make sure that you are current. A must do for security.

Plugin Check

A:Is Your Browser Add-Ons current

Thanks Richard, very useful.

Read other 8 answers

I am not currently having any real problems with my computer but occasionally I do get popups from the same companies, which leads me to believe they might have a little something in my registry. Also, gnucleuslan has been uninstalled and deleted, but Registry info still remains for it, and it is listed under startup command or whatever, so I want that to be gone. I just want to make sure I dont delete anything that I need to run.

here is my log.

Logfile of HijackThis v1.98.2
Scan saved at 8:42:20 PM, on 9/8/2004
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\Network Associates\VirusScan\mcshield.exe
C:\Program Files\Network Associates\VirusScan\vstskmgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\Anal... Read more

A:No current complaints....but

Please print out or copy this page to Notepad. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools->Folder Options->View tab and make sure that Show hidden files and folders is enabled. Also make sure that the System Files and Folders are showing/visible also.

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Please download Ad-aware SE and install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Go to this site to get the plug-in for fixing VX2 variants. Also make sure to customize the settings in Adaware for better scan results. Run the scan and fix everything that it finds.

Reboot into Safe Mode (hit F8 key until menu shows up).

Make sure to close any open browsers. Go into HijackThis->Config->Misc. Tools->Open process manager. Select the following and click Kill process for each one if they are still listed (they shouldn't be - but double check it):

C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr.exe

Uninstall the following via the Add/Remove Panel (Start->(Settings)->Control Panel->Add/Remove Programs) if they exist:

View... Read more

Read other 1 answers

Hello.... I'm running Win XP..OE 6. When I go to open OE, I get .. There is no current identity... Current identity could not be changed - one of the applications was unable to switch.Close any open dialog boxes in other applications before trying again. Any helpful info would be appreciated. Thank you

A:No current identity in OE 6

Read other 16 answers

I have a problem. I dont know my current password.My Hp mini vivie nne tam shows a screen askin for the current password after three attempts it says password check failedFatal Error...... System halted.CNU903294F help Please!!!

A:Current password

@mowocek00 Enter   e9lo1f7ov8 3rd letter lowercase L 4th and 8th letter lowercase O Use that code to go into the BIOS.Disable all passwords that are enabled.If asked for the CURRENT password use that code.If asked for NEW password just hit enter.If asked to VERIFY password just hit enter.Save and exit. REO

Read other 1 answers

Hi there,

Not sure if you guys can help me or not, but I'm trying to build a circuit for switching 12V, 2A power with TTL logic (+5V, 0V) voltage levels. Right now I'm using a MJ11033 PNP power transistor (rated 120V, 50A) with the collector at +12V, and the emitter connected to my load (bilge pump). For the biasing, I'm using an inverting small gain op-amp (741) setup, with the TTL logic going into the non-inverting input, and at the inverting input I have a 1k resistor to the ground, and 3k resistor going to the emitter of the power transistor. I have a 470 ohm resistor between the output of the 741 and the base of the transistor. For some reason when I put +12V power to the circuit, my pump is running continuously, regardless of the TTL level going into the input. On another note, if I disconnect the base altogether, my load will still run, which makes no sense to me considering there's no way the transistor should be in saturation if no biasing voltage has been applied. I've considered the idea of the transistor being shorted, and have used three brand new ones with the same result. Any ideas?


Read other answers

I currently run Windows Xp Home , and my favorite is XP PRO ....

A:Current os !! And favorite OS !!

yah im lame ....

Read other 2 answers

I'm running Windows ME and IE 5.5. I want to locate the DNS that my internet connection uses -- it's the ISP's server's choice, so it probably changes from time to time. How do I locate the numbers? I want to enter them in Anyspeed so I can know how fast my connection really is -- ME's lights in the tray show only the setting for maximum connect speed I set in the settings and not the actual speed. Thanks a lot! -- Deirdre

A:locating current DNS

Not sure what your trying to do but your ISPs DNS server Primary and Secondary addresses can be found here unless they are server assigned,

MyComputer>DialingUpNetworking. Right click on your ISPs connectoid and select Properties. Click on the ServerType tab and then click on TCP/IP button.

Read other 3 answers

Sure would appreciate a look at my current hijack this log.Still trying to learn
what I can do without and what I need to keep.Thanks for your help!
Logfile of HijackThis v1.97.7
Scan saved at 9:55:08 AM, on 10/16/04
Platform: Windows 98 SE (Win9x 4.10.2222A)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:

O2 - BHO: (no name) - {BCF96FB4-5F1B-497B-AECC-910304A55011} - C:\WINDOWS\NETI.DLL
O4 - HKLM\..\Run: [SystemTray] SysTray.Exe
O4 - HKLM\..\Run: [ScanRegistry] C:\WINDOWS\scanregw.exe /autorun
O4 - HKLM\..\RunServices: [LoadPowerProfile] Rundll32.exe powrprof.dll,LoadCurrentPwrScheme
O4 - HKLM\..\RunServices: [SchedulingAgent] mstask.exe
O9 - Extra button: AIM (HKLM)
O16 - DPF: {D27CDB6E-AE6D-11CF-96B8-444553540000} (Shockwave Flash Object) - http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab
O16 - DPF: {D27CDB6E-AE6D-11CF-96B8-444553528000} - http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab
O16 - DPF: {2AD5DBAE-2DDB-11D4-A96C-00E09872DF17} (PrintRoomUploader Class) - http://www.printroom.com/_vti_dnl/PrintroomUploaderX3.CAB
O16 - DPF: {E0CE16CB-741C-4B24-8D04-A817856E07F4} (IObjSafety.DemoCtl) - http://... Read more

A:Current Hijack log

There is a newer version of HJT.
Please go to http://www.majorgeeks.com/download.php?det=3155

Please note: When you download HijackThis put it in its own permanent folder like My Documents for example. DO NOT download to a temp folder or the desktop.

Launch program and click on the SCAN button. After scan click on Save Log . It should save to Notepad.

Click on Edit, then Select All. Then click Edit again then Copy. Then paste log back here in a reply.

DO NOT have HijackThis fix anything yet. Most of what it shows will be harmless / needed stuff. Wait for an expert to review it and advise you.

Read other 3 answers

I have one server that is my file and print, DNS, PDC, and AD server. I am getting a new server in that will be taking its place.

I want to take everything off that server, and put it into the new one such as files/folders (with all the permissions staying the same), Users and Computers stuff, and all the AD stuff.

What is the best way to do this? I work for a company that has about 20 users. Would it be more beneficial for me to just rebuild the AD? If I transfer the files and folders from one server to the next, will it keep the permissions or not? If so, will it mess up things if I don't have the user accounts set up before I tranfer? As you can see, I have a lot of questions. Is there someone in here that is very knoledgable with what I need to do, and any chance you could help me? Is there a really informative document that will walk me through the process?

Thanks for any information!!

Read other answers

My HDD is starting to get a little slow and i want to upgrade to an SSD. I borrowed an empty SSD from a friend to test the speeds but it didn't show up in BIOS. This is a standard Samsung SSD that should work. Is there a problem with my computer or is it compatibility problems with the SSDbrand or type? I am also looking into upgrading from 8GB to 16GB ram can somebody link 1 stick of 8GB RAM that will work with my computer without replacing the current 8GB stick. SSD I used: Samsung SSD 840 PRO  128GB (Model number: Z-7PD128)

Read other answers

EDIT: Now looking for Budget Gaming Desktop, not worth upgrading current PC.

Budget: $450-$750 USD
I have never bought anything online before.

Original Message
Here are my current specs:

MB: ASUS K8V SE Deluxe

CPU Manufacturer: AuthenticAMD
CPU Family: AMD Athlon(tm) 64 Processor 3000+ Model 4, Stepping 10
CPU Speed: 2002 MHz

Maximum Memory Capacity: 3072MB
Currently Installed Memory: 1GB DDR PC3200 (512MB x2)
Available Memory Slots: 1
Number of Banks: 3
Dual Channel Support: No

GPU: ATI Radeon 9600 Pro (Originally came with Nvidia GeForce 6800 GS 256MB;defected due to overheating)
GPU Memory: 128 MB
Memory Type: DDR SGRAM / SDRAM
Core Clock in MHz: 392 MHz
Memory Clock in MHz: 203 MHz
HDD: Western Digital 80GB

Now what I want to do is upgrade my GPU, Processer, and memory. What is the best components for my current motherboard? My HD is fine, and I don't see the need to get a larger one since I don't play those games that require like 20GB just to install. Oh and if you need any more info to help me upgrade, please ask me to do so.

A:Want to upgrade my current PC

Your CPU will be a problem, since Socket 754 CPUs are a thing of the past now. Otherwise, for a good upgrade, you would get greater performance with another gig of RAM and a new video card (and PSU, if need be). I'd recommend an HD 3850 or an HD 3650 (whichever fits your budget), and an Antec Earthwatts PSU (any of them will do).

If possible, upgrade the entire system, since all the technology you're currently using is almost obsolete. If it's not, no problem, the upgrades above will give you a significant boost in performance as well.

Good luck, and let us know how it goes.

Read other 6 answers

when i start my computer i get the same msg thats says


what will this be?
the USb port have going abit funny lately

im using windows xp pro

ANY IDEAS??????????

A:Detected USB over current

Read other 7 answers

Hello all, I hope you camn help me with my current issue.

My computer turns on normally however after passing the initial screen it comes up with an error saying "USB Over Current Status, system will shut down in 15 seconds".

This happened once before but I seemed to have fixed it by simply changing the front panel plug to a different usb point on the motherboard, this worked find for a few months before happening again although changing to a different port doesnt seemed to have worked, this time.

Removing the front panel plug from the motherboard also doesn't seemed to have worked, along with removing the front panel card itself. The usb's were badly damaged so I assume this must have caused a short.

Also at some points I was asked to "insert boot device and press any key" even though in the BIOS the hard drive was clearly there. This seemed to only happen when I removed the front panel plug from the motherboard.

Now, with the front panel card gone, the BIOS cannot detect my hard drive.

I am currently contemplating either buying a new front panel card or a new motherboard (if the shortage damaged it). I have an ASUS M5A78L-M LE and running Win 7 Ultimate.

Is there any way to get around this issue?
Will a new front panel work without replacing the motherboard?
Is it worth upgrading to a new motherboard without any issues with Windows 7? Or will I have to get an identical motherboard?

Any help will be apreciated.

A:USB Over Current Status

What sockets are on the 'front panel' you removed ?

What does 'the Usb's were badly damaged' mean ? What was damaged ?

In the Bios make sure the HDD is set as 1st boot device.

Read other 2 answers

I am helping a widowed senior with her system after a close call hard drive issue.

The hard drive issue is resolved but I find she is running Quicken Basic 2000 and is very active with tracking her finances and investments using this very out of date software.

I am recommending she upgrade to the current Quicken version. However, I have not been able to find much upgrade information help for upgrades that are that old.

My concerns are two.

First, will the current versions data files upgrade properly into the current version?

Second, what version should she be upgrading to? My experience has been that some features that used to be included in the base Quicken were spun off to Home And Business. Her investment information is critical to her.

Thanks ...weeG

A:Quicken 2k to current

You'll need at least one intermediary version.


If she wants to track investments, she'll something up from the low-end.

Read other 1 answers