Over 1 million tech questions and answers.

Looking for obvious or creative way to run OS in monochrome (black/white)

Q: Looking for obvious or creative way to run OS in monochrome (black/white)

I am looking for a method to run my system in black and white; not all the time, but only during certain circumstances (i.e. when focusing on writing or dedicated reading). Is there any way of doing this on a computer running Windows XP that does not require any programming knowledge or implementation of difficult solutions? Any solution that requires significant extra memory usage or WinXP visual themes probably isn't going to cut it. I'm looking for a way to do this that converts my entire user interface to monochrome temporarily. Is this possible or is it just an anachronistic pipe dream?

I am using a Dell Latitude D400 laptop running WinXP Pro SP2, with Integrated Intel Graphics.

Preferred Solution: Looking for obvious or creative way to run OS in monochrome (black/white)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Looking for obvious or creative way to run OS in monochrome (black/white)

Hello shoeshinesally and welcome to TSF !

Depending on your video drivers you may be able to play with some color saturation settings in the advanced display properties, but I don't think you'll have much luck with an integrated intel video.

You may find something that suits you in the high contrast modes in the accessibility options :
Click settings to access different color schemes.

Or some shell replacement utility could have a black & white color scheme. Be careful when installing one of these, make sure you've got the right one because they can be a pain to remove.

Maybe you'll find other clues in this thread :

Read other 2 answers

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:42:29, on 10/8/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Yahoo!\Antivirus\ISafe.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exe
C:\Program Files\Yahoo!\Antivirus\VetMsg.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Documents and Settings\All Users\Application Data\bklknats\hcrcfwzo.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\Synaptics\SynTP... Read more

A:Solved: (HJT Log Inside) Red Circle White X, Obvious fake dialog box that links to so

Read other 16 answers

On any website that I visit; all backgrounds are black and all text is white. How can I reverse this? Also, I am a stamp collector. When I visit Linns Stamp News all the web addresses are blacked out. How do I keep that from happening? While I'm at it my computer has slowed down considerably. I run Microsoft Essentials weekly, but it tells me that all is secure.
Thank you, sincerely, Kleon24

A:White to black background, white text to black

I think you can go to tools>options>colors and tick "Use windows colors".

Read other 1 answers

Thinkpad T60 laptop, Windows XP SP3. Machine has recently started hanging during login: I log in and the Windows toolbar never exits hourglass mode. This behavior is at least somewhat intermittent -- sometimes I'll start the machine and it will appear to come up normally.

Gmer does not report any rootkit activity. DDS logs are attached. I would appreciate any advice as to where to go from here.

DDS (Ver_10-03-17.01) - NTFSx86
Run by ark at 0:28:56.85 on Sun 07/04/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3070.2243 [GMT -4:00]

AV: Norton Security Suite *On-access scanning enabled* (Updated) {E10A9785-9598-4754-B552-92431C1C35F8}
FW: Norton Security Suite *enabled* {7C21A4C9-F61F-4AC4-B722-A6E19C16F220}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
C:\WINDOWS\System32\svchost.exe -k netsvcs
C:\WINDOWS\System32\svchost.exe -k eapsvcs
C:\WINDOWS\System32\svchost.exe -k dot3svc
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Diskeeper Corporation... Read more

A:[SOLVED] Frequent hangs for no obvious reason on XP -- don't see obvious malware eith

Hello arkoenig,

No, I'm not seeing any signs of malware in the logs. Take a look at the Event Viewer messages in the Attach.txt and it may provide clues as to where to begin with this.

It's best you post a new thread in Windows XP Support section. If I move this thread over there, you'll likely get bounced back here because of the logs in the thread.

Read other 2 answers

On a Windows 2000 desktop, all of the shortcuts (have the little arrow in their corners) have grey shortcut boxes with black arrows rather than the white box with black arrows like is normal. The icons themselves are fine, its the Shortcut part that is wrong.

At boot up the Windows logo has a lot of horizontal lines in the image; the Windows 2000 image on the side of the Start menu also has a lot of lines in it.

Spybot removed 32 items which fixed some of the issues (like the covered min/max/close buttons which we had) but not everything. Has anyone seen these issues? Any fix ideas? I'll run HiJack This next time I connect but I'd like a few more options to try before spending time on this issue...

A:W2k: Shortcuts are grey-and-black not white-and-black; Windows logos corrupted

For your shortcuts, try this:

Start>>Run. In Run type "assoc.lnk=lnkfile" (without the quotes), clikc OK

Read other 3 answers

Bit of a long story but here I go.

I have 2 Radeon 6950 with the crossfire thing set up, it's been working well for over 2 years.

Over the last few weeks I've been having issues, mostly while watching videos (usually HD and/or full screen). The video will freeze, the audio will loop, then eventually the screen goes black and I get an error message saying "Display driver has stopped working and has recovered".
Sometimes it didn't recover and I have to turn the computer off.

What's now happening is it will freeze at the windows start up. Then after resetting I will get to windows in very very low resolution and in black and white.

So I 're-seated' the cards. I couldn't notice any obvious damage to it except the fans were very dusty so I cleaned them.
Boot it up and I still get the black and white.
I checked the device manager and it said one of the cards was having problems, I uninstalled both drivers from that menu (not quite sure if I should have done this) and for whatever reason it's now working.

However it now seems one of my cards is not being recognised. Only one display adapter is shown in the device manager and AMD catalyst only recognises one card too.

What's the best course of action to determine what's wrong with what card (still not quite sure which one it is).

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: Intel(R) Core(TM) i5-2500K ... Read more

Read other answers


I trying to run the old game Black&White on my Macbook in Bootcamp mode.
Running WinXP SP2. During boot-up of the game it just turns into a black screen and the white windows pointer show up.

Anybody knows about this problem? I would highly appreciate if someone could help me with this one.



Read other answers

Dear all,

I am not sure whether this is the right forum for my question. Excuse me if not.

Anyway, my question is - is it possible to change the whole Windows XP interface from color to monochrome on a "regular" laptop computer? If yes, then how? In the old days, it was possible to do it under the display settings if I remember correctly; but now in my present computer, there are only two choices: 32 bit vs 16 bit.

Why would anyone want to do such a thing? Just because. There is no particular reason.



Read other answers


I'm having trouble saving monochrome bitmaps.
Is this a 'known malfunction' ?
Or am i doing something wrong ...

The 'shading' function gets lost and turns to black.
Its ok til i save it, then it loses the 'Shading'


A:Help req with monochrome bitmap

Read other 7 answers


I am on ,

Windows XP SP3 x86.
Dell 755 Core2Duo 2.00Ghz, 4GB RAM.

I have a PS3eye camera installed with latest Cl-Eye drivers installed. The camera is working and detected fine in all of the Webcam enabled applications.

I did install a second camera Creative Live Motion, with the intention of setting up a home survelliance system with AbelCam or WebcamXP Pro. I only installed the drivers from their website and not the application. Initially the camera seemed to work fine and I was able to add it as a second camera device in MSN and AbelCam.

However after just a couple of reboot and uses , the Creative Live Motion webcam shows no video output at all. The video window when it is selected is complete blank/black. As mentioned in troubleshooting advice I have tried installing/uninstalling the drivers numerous times. The camera motion controls are working fine, but the camera shows no video output on screen. I am pretty sure its not broken cause I installed is just yesterday. There are two camera inputs shown with its driver installed , the Creative Live Motion Cam and Creative Live Motion Cam (VFW). I am not exactly sure which one to choose but both of them are unable to output any video.

The PS3eye on the other hand continues to work fine. I have uninstalled all drivers/software of PS3eye, Creative Live Motion and Abelcam and will check it tomorrow to see if its alive again.

Till that time...is there anyone else with a similar problem who can guide me.? Maybe a co... Read more

Read other answers

I'm pretty colorblind, so a 32-Million color palette is, well... it's silly.

I want to set up Vista to run all black monochrome. I imagine this would also save compute cycles for my graphics card and, thus, electricity.

So, has anyone run across a black-and-white system palette anywhere?

A:Looking for an All Monochrome system setup

hm... haven't seen one.... tried making one yourself?

Read other 7 answers

I`ve had a 2x 27" monitor setup ever since I got my laptop about a year ago. One monitor is connected via Displayport, the other one via VGA. I keep the lid of my W520 closed so I only use the two external monitors. Today I had my laptop unhooked from my workstation and now when I try to hook it back up again the screen that is connected via VGA shows up black and white.  Here is what I did while my my laptop was unhooked from the monitors:1) Took it to work as usual (it didnt drop or anything like that so I dont think it would`ve got physically damaged)2) Installed a new battery (just arrived today, Lenovo original) Here is what I tried to get the issue resolved:1) Update both integrated and Quadro 1000M drivers2) Switch monitors (the one that is connected via VGA is B&W always)3) Switched to a brand new VGA cable4) Restarted my PC multiple times5) Fiddled around with the settings under "Screen resolution"6) Checked VGA port - cosmetically it looks like it always has (no damage or anything like that)7) Switched back to old battery and tried everything again Please help me out! I would hate to have to take my computer to a hardware specialist because I am just out of warranty and I cant really afford professional servicing. Since I`m pretty sure nothing got physically damaged, what other software fixes could I try?  Thanks in advance!

-----------------------------------------------------------------W520 4270CTO, i7-27... Read more

A:Monochrome external VGA monitor

Check in the NVIDIA driver control panel under color settings. It might have saturation set to zero.

Read other 3 answers


I have a dell D610 running XP with a SVG and a VGA output on the back. I need to display the screen on a cctv monitor that only has a BNC input. After some digging around I bought an s-video to BNC lead, full of confidence I plugged it in and got a monochrome, blurry image

I am a little confused, does anyone know what I should use to get a high resolution colour image on my monitor ?



A:s-video to BNC gives blurry monochrome image

Read other 12 answers

Hi TechGuys,

I have the following question:

Is there any software which could replace the background in my webcam (if I get a mono-colored backdrop) with a photo or a repeating video of my choice (RealTime)?

A:WebCam: Replacing monochrome background?

Nobody having any idea?

Read other 1 answers

When I try to print a photo, I check the settings to make sure it is in color, but when I select color, it reverts to monochrome when I go to print. This happened before and I cannot remember what I did to fix it. I think it has something to do with photo
viewer or paint that is messing it up.

Read other answers
A:Half black, half white screen with picture of 3 black leaves...

Hello @rpickard, Thank you for visiting the HP Support Forums! The forums are a great place where you can find solutions for your issues, with help from the community! I came across your post about the display issue, and wanted to help!  I understand that you believe the screen may be cracked. You can try performing a Hard Reset.  However, based on the information that you provided, the screen is likely damaged.  You can try reviewing the following document to verify, and for additional options: HP Notebook PCs - Diagnosing a Liquid Crystal Display (LCD) for Damage Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

Read other 1 answers

My problem: the Cancel button is stuck in the depressed position. How can I free it up so I can continue to print? The problem occurred when I attempted to print the reverse side of a double-sided print job. I've cancelled that job and two others I tried as a test, so there's nothing in the queue now.

A:Samsung ML-2510 Monochrome Laser Printer

get a flat head screw drive out and pry the button out...
take it apart and get the button out.

Read other 1 answers

i have a 8600gts 512mb vid card and for some reason on a couple websites when i stream videos it comes in color but most it comes in black an white...movies i download play in black and white to is there something i can download to make sure i have all my drivers? i jus redid windows xp pro on this computer cause i had a virus on it so i deleted my old partition an made a new one...

A:Black and white?

forgot to add all my games i play work fine and are in color its something with streaming an movie files....

Read other 1 answers

Hi all,
I'm having a serious problem running black and white 2. Pleanty of people have been having trouble getting it to run, but I have as of yet seen anyone address a problem similar to my own. I've recently installed the new catalyst 5.9 driver for my radeon 9800 + all in wonder, and I figured that would resolve some of the graphics problems I'd been having running the game. Unfortunately, after the installation, the game's diagnostic tool reads no display memory on my pc! Then when I try to run the game, I get a fatal error that reads "cannot create 3d device" and the game shuts down. Much appreciative of any help you could offer here!

A:Black and White 2

Welcome to TSG!!

... It may have "bonded" to the old software...
You could try removing the game and reinstalling..

That is the first shot when it worked but now won't.. That, or go back to the older ATI drivers..

Read other 3 answers

i finished the project by Microsoft Visual Basic 2005 Express. the project is about the truck logistics system.
NOW, i need to do the test plan. my guideline included:
State how you will do the testing (black box / white box)
how can i do the black and white box?? have other software can help me to do it ??THX~~~~~

Read other answers

The minimum requirment to play the game black and white is 64mb of ram i only have 62mb is their anyway around this? Or do i have to get more ram and if so..... how do i do that? still pretty new to this kinda stuff

A:Black and White

Read other 7 answers

Okay, so... I just hopped on the bandwagon of buying Black & White too, and took it home to my much abhored computer... and tried to run it... and it failed.

It said I needed a graphics card which had pixel shading capabilities of 1.1 or something.

Now, I'm definately not computer savvy... in fact, I shouldn't be allowed to mess around with the inner workings of a computer...

But I wanna play!

Any suggestions?

I don't know much about my computer specs, but I know my graphics card is an Intel Extreme Graphics 3D or something. It came standard with the stupid computer. By the by, my computer is an EMachines T2792 or something along those lines. Don't laugh, it was a gift. X_x;;

Can anyone help out?

A:Black & White 2

You will need a standalone graphics card to play it. You have a motherboard-integrated one, which is useless to run any game (except Minesweeper and the like maybe =P). But seriously speaking, you will need a new graphics card. I see that your PC has an AGP x4 slot. Look to get an FX5500 or an FX5200. It will be more than enough to run Black & White. Get an AGP one though and not a PCI version, since both cards are available in these versions. They shouldn't cost more than $40-$50.

Read other 14 answers

5 yr old ASUS---win. Vista home Prem.--build 6002--2-53gigahertz--Intel core2 duo--- 750-15 gigabyte hard drive capacity and approx. 300gb free space. ASUS Intel socket 775 mother board V-P5G 31.

Have had problems and deleted sus programs Norton 365 ran out and tried Avast and thought i had more trouble so deleted that and tried microsoft but has no virus protection .with all this deleting , I now have a black screen on admin start. (TSG Sys
Info appears to be closed ) but start with the 2nd start icon and all OK except i only have empty icons on eg. iTunes .Any help please ?--------go easy as i`m not too good with IT .

ozziedigger Tech Support Guy System Info Utility version
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, x64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 715401 MB, Free - 311510 MB;
Motherboard: ASUSTeK Computer INC., V-P5G31
Antivirus: None

A:Black and White

can you do a system restore to before you started making all the changes

Restore PC to an Earlier Date & Time

Go Start>>All Programs>>Accessories>>System Tools>>System Restore
Click in the radio button Choose a different restore point
Click Next
put a tick in Show more restore points
Pick a Date before this happened
Click Next
This should restore the PC to that time & date

you may need to use safemode to do the restore. As the PC starts keep tapping F8 - a menu will appear - choose safemode

windows vista


Read other 1 answers

It's on the Mac's. An option to make your screen like a negative picture, white is now black, people are ghostly. Any way to do this on the PC?

A:Black on White?

Quote: Originally Posted by 1dnastrand

It's on the Mac's. An option to make your screen like a negative picture, white is now black, people are ghostly. Any way to do this on the PC?

Not that I know of, there might be one though.

You're not going to be able to do anything like that with windows 7 starter.

Read other 2 answers

hey im trying this game to see if it works, but all of a sudden when i go to install it gives me this error.

This build of cdcode is for black and white this is an invalid build of cdcode. Please fill out the Ereg config form to obtain a valid cdcode.

wtf is that and what does it mean. How can i have an invalid cdcode?

A:black and white

Read other 7 answers

i've tried all the options available to me in the control panel for the display (the tv is pal and i've adjusted accordingly). still black and white. the only thing is, i'm going from s-video to composite converter. do i just need to buy a cable that has s-video sockets on both ends? my tv has both AV and S-video. but i've always used the AV before now...

A:TV-out is black and white

oh hang on, i've just noticed the s-video output on the graphics card is 7 pin. but the cable i've got has only 4 pins. will a 7 pin cable solve my problem?

Read other 1 answers

The system requirements are 64mb RAM, 16mb graphics card, and I don't understand how it could be running with a choppy frame-rate.

I'm on Windows XP with 512mb RAM, 64mb AGP GeForce4 MX440 and the lowest graphics settings on the game but it still runs like cr*p. Counter-Strike: Source gets around 30fps average, but B&W gets 7-10fps.

Is it a demanding game?

I know B&W2 is demanding, and people had problems with B&W2 deciding to boost the graphics, slowing down the framerate, without letting the user adjust for better performance, is there anything like that on B&W?

Thanks for any help

A:Black & White 1

my friends been having the same problems...and after a re install it worked fine...except all he could see off the people and creatures wer floating faces.,...i think u may have to upgrade the graphics driver...and re install the game...

Read other 1 answers

My PC is used by all of the familly, all using different accounts. When I log onto my account or the admin account everything is ok. The problem arrises in all of the other accounts, they are all black and white. I have had a look to see what I can do but I can't seem to locate the problem......

A:black and white

Hi Wdfndn,

Have you performed a system restore? Seems like that's helped some people straighten out their systems.


Read other 1 answers

I bought this game some time ago and it didn't work then...... I forgot about it since nobody in the immediate surroundings could help. I tried it again just a few days ago, and the thing still doesn't work!

I install the game and everything goes fine. Until I try to run it. I get the load screen (the black screen with the white logo) and it just sits there for a minute or two: the computer is busy doing something, the CD is spinning, so I leave it alone....... But then I get this message:
Runblack has caused an error in ~DF394B.TMP
The game will be terminated.
Restart your computer if you keep having probs.

This is a very odd error no? I mean, an error in a TEMP file?
I tried all the patches (v 1.10, 1.20 and 1.30) but nothing seems to help....... And I cannot exit the setup cause I get an error in <unknown> message.......
Anyone have any idea why there's this error?

I have a P3 650MHZ running winME
Radeon 9000 pro
No special devices of any kind

A:Black & White

Read other 7 answers

hey guys,

i just installed Black & White on my computer, but i can't seem to stop the intro, it just keeps going. is there some sort of command i can use to get past it?

thanks a bunch,


A:Black & White Into

No - thats one of the flaws of BW1. You can't skip the tutorial or the video. It isn't that long anyway.

Read other 2 answers

hey guys whats up,
i just wanna know if theres a way to get black and white runnin on my system. i have xp and it seems to not wanna work. doesn't say any errors or anything, it just acts like it's about to load but right before it goes into the game it stops :/ i tried backwards compatibility (spelling) but it still didn't work. help plz!!

A:black and white


Did you check you have enough RAM space ?
Try to patch your game to version 1.2 .

Read other 1 answers

when i connect my pc to my tv using a s-video to scart converter i only get a black and whit picture on my tv,...very very annoying,...the grahics card is a g4 ,....can anyone help me as to why this is happening ,..i am at a loss,.......tried changing the av modes as well on my tv,..anyone,..someone must have the answer,.,..

A:pc to tv black n white,.???? help..

check whether your tv is NTSC compatible and make sure you have the right leads

Read other 1 answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Pentium(R) CPU N3700 @ 1.60GHz, Intel64 Family 6 Model 76 Stepping 3
Processor Count: 4
RAM: 8106 Mb
Graphics Card: Intel(R) HD Graphics, 1024 Mb
Hard Drives: C: 930 GB (875 GB Free);
Motherboard: Acer, Zoro_BA
Antivirus: Windows Defender, Disabled​Hi, I'm having a problem getting my computer out of black and white color. A tag came up and asked if I would like to go to high def. and I said yes and now I don't know how to switch it back. Could you help?

Read other answers

When i try to play B&W the screen tears,and the game is realy slow.Have AMD XP 1.5 Ghz,640 MB RAM,WIN 98 SE.Have latest driver for my geforce4 mx 420 card (4403).Have played this game before with VOODOO 3 an it worked ok.(although slow) I have not played the game in a while,(have not played it on new card)but now my granddaughter wants to play it again.I now know the mx 420 is not that great of a card.But can something be done to play the game?
B&W patch 1.20
geforce driver 4403
Thanks if someone can help.Bill

A:Black & White

I don't know the exact cause for the problems you are having but I encountered the same issues trying to play B/W with a PNY geforce mx440 card on my old system running w/me. I had played this game using an ATI expert pro 16mb card with no problems other than it would slow down after awhile and get very choppy. I tried the gforce card and although other games would play black and white would not. I couldn't see any improvement over the old ATI 16mb card. I then noticed that on the box the gforce card came in it stated that I needed to have at least a 250 watt power supply. My hp computer had only a 125 watt power supply so I returned the gforce card and exchanged it for a ATI radeon 7500 64mb card and all games played perfectly. You may have already done this but did you remove the voodoo drivers before installing the gforce card?

Read other 2 answers

I have a dell 946 all in one printer. all of a sudeen it began printing in trhis light red color and now I am unable to make it go back to printing my letters to my daughter ion black and white. What do I do to fix this?

Thank you for your help

A:black and white

Hi, well that really seems to be a printer issue, would it be stating the obvious to check the ink level and/if there is a flow from the ink cartridge(s)


Read other 1 answers

Guys, i have a problem with a TOSHIBA A75 S2112 laptop, motherboard ATI MOBILITY RADEON 9000 IGP, when i use te TV-OUT (S-VHS) i got only black & white images. Does anybody know how to change the COLOR SYSTEM to PAL-M, or even using NTSC-M (my TV is NTSC-M) how to get colorfull images? See ya

Read other answers

Hi Guys!

I have kind of a huge problem, atl least in my eyes; since i cant seem to fix it.
I have a cable going between my tv and graphic card so i can watch the movies on the tv instead on my stupid 19 inch lcd computer screen.
And it has been working out great until now that is. You see all of a sudden the tv went black and white. the lcd is normal and i just cant figure out how to fix it. ive tried reinstalling the drivers, taking out the graphic card (geforce 7600) and putting it back in, ive tried a different cable and it still wont work. my friend who is a bit of a computer wizzz tried to fix it but was boggled.

So now i ask you the brain bunch out there to please help fix this problem.

A:Black and white TV

Read other 9 answers

Hi, I have successfully installed and used VirtualDrive 6.2 on my computer, but am having problems creating a usable image file of the game Black and White.

I think it is probably down to copy protection. Even when the image file is in the 'drive', Black and White still asks for the CD to be inserted.

Any comments?

A:Black And White

closing duplicate, view this thread

Read other 1 answers

I used a monochrome ribbon in my datacard sd260 printer and when i put the color ribbon back in its stilll only printing in monochrome.help!!!!

Read other answers

hey i want an iPod video for my b-day. I can't decide between white, black, or U2 iPod. Please help...

A:Black or white iPod?

Read other 7 answers

I've only recently got my PS3, I put in a blu-ray movie and several others and it's coming up black and white? It is a non-HDTV I have at the moment, but I was sure it was still possible.

Some clarification would settle this for me, thanks.


A:PS3 Bluray in Black and White?

Read other 6 answers

My laptop freezes then screen turns white. Curser kept on loading but can still drag around. Minutes later screen turns white and one small colorful square appears, it disappear but then comes back again. I am using windows 10.

Read other answers

I have Vista Home Premium 64.

For no appareant reason windows is now displaying everything in black and white only. When I restart, the Windows desktop briefly shows in colour and then changes to black and white. I can find no reason why and cannot find a way to correct the problem.

Can anyone assist?

Thank you.

A:Black and White Desktop

hello dforrest

If this just started , can you try system restore?
start > all programs > accessories > system tools > system restore > click OK @ uac prompt, pick a date before problem stared..

good luck

Read other 1 answers

Hi. Last 6 days I am trying to connect my laptop to TV using s-video cable (7 pins).
I do get the picture, but it displays like White and Black only, I tried to change from NTSC to PAL (I am from europe) and yet doesn't works.
What may be the problem? Cable ain't because it works from my other PC.

Laptop specifications:

Toshiba Satellite A205 S4577

Intel Core 2 Duo (Centrino), 1.75 GHZ
HDD 160 Hitachi
Intel Graphics Media Accelerator 950 (945 express family chipset) 1280x800 px
1 GB of RAM (Samsung)
Help Appreciated.

Read other answers

what are the possible causes of no sound, no picture & no raster?

A:black & white television

Is this a Firefox problem?

Read other 1 answers