Over 1 million tech questions and answers.

Asus DH Remote utility for Win 7

Q: Asus DH Remote utility for Win 7

Hy there, i'm having a problem with Win 7 (x64)....i can't install the driver utility for my remote controler....Win 7 does recognize the usb receiver as ASUS DH REMOTE .... but when i install driver from Vista x64 the setup fails to install acpi driver (i need the program to configure the device )...i've tryed run as administrator and same happens... so if anyone has some exp. about it...
My MB ( Asus P5W DH DELUXE )

TNX..

PVD =)

RELEVANCY SCORE 200
Preferred Solution: Asus DH Remote utility for Win 7

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Asus DH Remote utility for Win 7

Quote: Originally Posted by PVD


Hy there, i'm having a problem with Win 7 (x64)....i can't install the driver utility for my remote controler....Win 7 does recognize the usb receiver as ASUS DH REMOTE .... but when i install driver from Vista x64 the setup fails to install acpi driver (i need the program to configure the device )...i've tryed run as administrator and same happens... so if anyone has some exp. about it...
My MB ( Asus P5W DH DELUXE )

TNX..

PVD =)


Try using the Vista conpatablity mode to install that driver. Right clicking the driver should show you the option.

Read other 2 answers
RELEVANCY SCORE 52

Two of my fans are running at 50%.
Although my case is running cool ( 32 to 35) and running Intel Burn Test and under full load it was 80 degrees, I would still like to adjust fan control.

I have the Asus P8z77-v and downloaded the utility for Fanxpert 2 which allows for control of fans.

The program was downloaded from Asus site, but will not run.

Thanks for any advice.
Paul

A:Asus Utility won't run

Hi,

From the attached image, it looks like the exe and associated files are still wrapped up within the .zip file. Extract the files to their own folder, then try and run setup.

Regards,
Golden

Read other 6 answers
RELEVANCY SCORE 50.8

Hello SF members.

Note : I dont know where to put this topic. If you know better , move it.

I already asked some questions here, some members helped me a lot but I need help again.

In one topic I asked how to Overclock. I learned it , and know more about it.
But now my problems is my BIOS. I dont know how to use it. That isnt classic....
I dont have to edit time or HDD slave, not to do anything harder !

My BIOS is same as http://images.anandtech.com/doci/4499/ASUS%20BIOS%201%20-%20EZ%20Main.png

My motherboard is ASUS P8H61-M LX2 and it have latest ASUS BIOS (EFI BIOS Utility- EZ mode , I attached one link here to see).

My questions are :
1. Can I back normal BIOS like one old ?
2. How to use that ? Is there any tutorial for this ?

That is all for now.
Thanks in advance.
Trinty.

A:How to use ASUS EFI Bios Utility - EZ Mode ?

Did you read your MB manual. It has a section on the Bios that explains all the options. If you click on the Advanced Mode it will look a lot like the old bios with lots of options.

Jim

Read other 3 answers
RELEVANCY SCORE 50.8

do i need asus epu6 utility. I have no plans to overclock. when my pc was built it was installed at high performance with tranquility. I never used it in 1.5 years so I uninstalled it. Should i put back on

A:do i need asus epu6 utility if not overclocking

It's not really about overclocking, but power savings. I have not used it myself. You can certainly do without it, but if you are interested in seeing what effects lower energy usage settings have (if any) on performance in day to day use, you might be able to save some energy.

Use the ASUS EPU-6 Utility for Greener Computing

A Guy

Read other 1 answers
RELEVANCY SCORE 50.8

Hey guys i want to update my ASUS k8n4-e-deluxe bios.. i downloaded the latest bios update from asus's website... but i dont know which bios flash utility to use... can anyone give me a link

thanks
harris
 

Read other answers
RELEVANCY SCORE 50.8

Hello! Looking for a good, free and lightweight alternative for Teamviewer. Found AEROADMIN. Does anyone use it? What can you guys say?

Read other answers
RELEVANCY SCORE 50.4

ASUS board, 1 year old, has the Asus Probe Utility for, among other things,
monitoring the fans, incl. the PS fan, the CPU fan, and one of my 3 case
fans.

All of a sudden, it says that the chassis (case) fan isn't running, and is
giving an audible "bonk" warning sound. But the fan IS running.

It's plugged in to the board.

What's wrong, can anything be done to fix this?

Thanks!

I hate to turn the utility off, but don't want to listen
to that bonking all the time, incl in the headphones.
 

A:ASUS Mo Utility Suddenly Doesn't Recognize Fan

the asus probe reports a fan problem when a fan is either running to slow or does not register at all (and therefore is considered stopped)

if the fan uses a 3-pin connector that goes into the motherboard, the yellow wire is ised to detect the fan's speed. you have to make sure that there is, at no point, a loose electrical connection, or one that is blocked by dust.

you can disable the alert in your bios, and probably in the asus probe utility as well.
 

Read other 1 answers
RELEVANCY SCORE 50.4

How do I reboot a Asus windows 10 I think it is I need your help asap please give me a call 6672007582
 

Read other answers
RELEVANCY SCORE 50

Is there a utility built into windows 2000 advanced server that allows you to shutdown remote computers on your network at a specified time?
 

A:remote shutdown utility in win2k advanced server

i'm not sure if there is or not but there is a free program called PSTools (you can get it here ) that you can shut down pc's remotely as well as restart services and numerous other tasks. this is a must have program
 

Read other 1 answers
RELEVANCY SCORE 50

Hello all, I am new to OC. I just wanted to see what my system could do. The motherboard has a built in OC utility in BIOS. The motherboard has three settings you can click on, Energy Efficient, Normal, and OCBurner(or something of that nature). I have Open Hardware Monitor always running. My temps never go higher than 45 C. The BSOD/Lock Up is sporadic. Sometimes during gameplay, and other times just idling. Any ideas?

Here is my rig if this helps.

AMD FX-6100FX Black Edition, normal clock is 3.31Ghz, using the OC utility its 4.14Ghz

Asus Sabertooth 990FX MOBO

DDR3 PC10700 4x4 16GB Kingston RAM

Asus 660ti DirectCU II 2GB GFX

Corsair GT 240GB SSD - OS, Games.

Hitachi 1TB SATA - Storage, approximately 95% empty.
Please assist in this matter, I am pretty good at building PCs and troubleshooting, however, I am new to OC. Thanks in advance!

A:BSOD After using ASUS Sabertooth 990FX MOBO OC Utility.

From a BSOD perspective, I can say that Overclocking makes the computer unstable. If it BSODs with overclocking and stable without it, I would go with stable.

Read other 9 answers
RELEVANCY SCORE 50

After downgrading my Os from windows 8 to windows 7. I also noticed that my system can't detect WIFI or dsl or any form of internet connection.. I want to upgrade my drivers and utilities in windows 7 but the problem is,, i cannot connect to internet.. is there anyone who can share a downloaded drivers and utilities for windows 7.. I am really having a hard time with this..

Specs:

ASUS S550C Series
CPU:Intel Core- I5- 3317U, 1.7 GHz
ODD: DVD Sup. MTI
Memory: 4 GB
HDD: 500 GB

A:Where to download drivers and utility for windows 7 Asus s550cm

You will have to take a look at the device manager and get the drivers off the manufacture . Asus doesn't have drivers for the laptop on windows 7

Read other 3 answers
RELEVANCY SCORE 50

Hi Seven Forums,

I have a problem with my Asus X52JK laptop.
Upon getting a new laptop and my sibling's laptop (conveniently) breaking down it was decided that I would give the X52 to her.

I backed up all of my personal files to an external HDD so no worries about retrieivng them. When I went to create the Recovery Discs through the utility mentioned in the title that all went smoothly and so I began the recovery process.

Booted from discs first and went through the moitons and when that was done I was expected the W7 installation screen however I was greeted with my old login screen with user account still there.

I repeated the process with the same result then decided to check the Recovery Utility and says partition does not exist yet I used MiniTool Partition Wizard and the partition is in fact there. I have tried to use EasyBCD to get around this but with no luck. I have spent roughly 2 days on this problem.

So is there a remedy for this or will I just have to download a Windows 7 ISO and install that?

I appreciate any help I can get.

A:ASUS AI Recovery Utility message: Partition does not exist.

Asus know they have a problem with the Recovery Partition & A1 Recovery app.








  
Quote: Originally Posted by Nite10dnood


This issue frustrated me for quite some, so I had to post this since I couldn't find the solution anywhere else. I also made a tutorial on youtube
ASUS AI Recovery burner fix: Partition does not exist - YouTube
because I tired looking there too for answers.

Read other 5 answers
RELEVANCY SCORE 49.2

i have an ASUS piece of garbage thats not even a year old - model X751N - that opened up today with a series of start-up errors. one was "Inaccessible Boot Device" and it tried repairing itself multiple times. then it opened up automatically in ASUS Bios Utility which i couldnt get out of. i looked online and found a way to get around it, but my overall question is, when im getting these errors and auto-repairing and bios utility...is this generally a sign that the laptop is a goner? i dont think i can trust this unit anymore. its running windows 10 if you need to know.

thanks for reading.
 

Read other answers
RELEVANCY SCORE 49.2

I am trying to update the BIOS and went here to use their update utility:

ASUS - Motherboards- ASUS P5Q-E

However, the software Afudos BIOS update tool V2.36 will not load (3rd item of the above web page's list)!?!?

What do I do now? Any other BIOS update utility compatible to the Asus P5Q-E?

I am having these problems: http://www.sevenforums.com/crashes-d...ing-start.html

A:Asus P5Q-E motherboard bios update utility software won't install?

You could have a corrupt file. I would down load a new copy and try it.

Here is a link to Asus for your board.

ASUSTeK Computer Inc. -Support- Drivers and Download P5Q-E

If that doesn't work here is a link to an engineering ver of AFUDOS that may work.

Afudos Engineering - Download

Try those out as the first attempt. The engineering ver will let you downgrade if you need to.

Read other 9 answers
RELEVANCY SCORE 49.2

Hello,

was long time member unfortunately it seems that my account got wiped? Or im assuming you guys have some cap on non-active accounts.

Non the less, im here about my x751s. Today i turned it on and it made 5 rapid sequential beeps and goes straight to the BIO's menu.
Ive tried launch csm route, but that gives me the " No bootable driver" error, On startup ive tried esc, f1, f8, f9, f10, f11, f12 none of them work.

I opened my laptop and looked around, safely unclipped the mother board connections and nothing looks out of place i unscrewed the HDD it looks good none of the small slits are moved and the pins are also fine.

Any ideas?

Thank you,
David
 

Read other answers
RELEVANCY SCORE 48.4

Hi there,
My sister just bought a new desktop. It was working fine and all. But this morning, she forced shut down a windows update. The next thing happen once it gets past through BIOS is
"Reboot and select proper boot device or insert boot media in selected boot device and press a key"
So I told her to look at the BIOS setting and it only recognise the Optical Disc Drive of
"SATA SM: TSSTcorp CDDVD SH-2"
as shown in the picture below

Is there anything I can do? I tried opening the desktop case and see everything is loose, but everything was still in tact.
Any suggestion would be much appreciated.
Thanks in advance.

A:Hard Disk Drive not found in ASUS UEFI BIOS Utility - EZ Mode

Try reinstalling the driver, changing cables. If it can't be recognized then boot the maker's diagnostics DOS CD scan to test it - Seatools if there isn't one - or Partition Wizard bootable CD surface scan. If these won't see it you can slave it to another PC to try Disk Check or see if it will see it. If not then I'd replace it.

Do a Clean Reinstall on the replacement drive from tutorial in my signature below if you want it perfect.

Read other 1 answers
RELEVANCY SCORE 48

Here is my problem, I ordered an ASUS Ai Remote over Ebay to use on my ASUS M2N32 SLI Deluxe Motherboard, however the installation driver was programmed foolishly and wont allow me to bypass this warning message...

"AI Remote does not suppport this model or you must upgrade BIOS."

I have contacted ASUS with possibly a solution... yet of course ( how surprising ) they have yet to respond.

Can anyone tell me of a method to bypass this error message and or to extract the files to manually install them myself?


Note: all attempts to extract the .cab files failed "No Achives Found"
 

A:ASUS Ai Remote

Bump, anyone at all... If I could provide the installers for the particular remote drivers, could someone possibly modify the installer to be more forth coming to other motherboards... or extract them for me? o.o
 

Read other 15 answers
RELEVANCY SCORE 40

Howdy,

I need to set up my Win7 desktop so I can access it (and my home cloud) from the road with my Win7 Laptop. Should be pretty simple...except, the Remote Access Functions DO NOT APPEAR on the [System Properties] pop-up on the [Remote] Tab

See pic attached..

Cannot fill in the form, if the form ain't there.

Heeeep, please.
 

A:Remote Access: SystemProp>Remote>NO Remote Functions Visible

What version of Windows 7 is installed on your computer?


 

Read other 9 answers
RELEVANCY SCORE 40

OS: Win8 64bit (My desktop is Win8, my laptop is Win7. We're dealing with the desktop here.)
Where I am: university network, but these features seem to be working with my laptop.
Things I've checked: allowing services through Windows Firewall (Bonjour, WMC services, etc.)
Allowing remote services in System Properties
Many, many existing threads and non-solutions
How I'm feeling:

None of these features or applications work, and they're all supposed to function differently from one another (e.g. WMC doesn't use the Apple Bonjour service, so it isn't a program-specific problem). I just want to control my media system with my desktop
Is there some obscure service or file or setting that I'm missing that could prevent any remote applications?

A:Remote features not working -remote desktop, WMC, iTunes remote, etc.

Let's focus on "remote desktop". Can someone remotely access it from the internet?
If not: Can someone remotely access it from same LAN?

Read other 8 answers
RELEVANCY SCORE 38.8

Hi

I know there are other products out there, like vnc, ultravnc, teamviewer etc etc, but really nothing beats the sheer speed of remote desktop, it's like sitting in front of the actual computer. I also know about Remote Assistance built into Windows 7.

I would like to use remote desktop to do the following if possible.

1. I would like to know if there is a way, to not lock the host machine that you are connected to?, so the user can see what you are doing?.

2. Is there a way that Remote desktop can be used without logging off the logged in account?, or just use the logged in account?

I would like to use Remote Desktop for a remote helpdesk solution if possible. If anyone knows how to do this things I am asking it would be the people on this board.

A:Using Remote Desktop instead of Remote Assistance for remote helpdesk?

Might be possible to do it. I think you need some sort of security.

Read other 8 answers
RELEVANCY SCORE 37.2

·                                                                                                                                                                                            
I haI have been accessing one of my windows 7 remotely using RDC. For some reasons  I can’t access it any more with this message:  
"Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference
between your computer and the remote computer. Make sure your computer's clock is set to the corr... Read more

A:Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer

Ours was a DNS issue.  Someone put an entry in the wrong firewall.
 

Read other 15 answers
RELEVANCY SCORE 36.4

Hi Guys I hope that this doesn't sound too silly a question, but here goes: Laptop bought Dec 2014, Win 8.  Updated to Win 8.1.  Now upgraded to Win 10 via the MS free upgrade. I then ran the "Create recovery media tool" and produced the recovery drive (19GB+) - ie just after the Win 10 upgrade. Does anyone know if I can verify if the USB I have created holds Windows 8, 8.1 or 10? Also, can anyone explain why the same process (home made PC rather than HP laptop) produces a recovery drive of just over 4GB?  Both USBs were created within an hour of each other, and each of the computers has virtually the same 3rd party software on them. Many thanks for your sagacious help. ChilliFix

A:does create recovery media utility create utility for window...

ChilliFix, welcome to the forum. I believe that the Recovery media will be for Windows 8.  This is the original OS.  The app to make it is set for the original configuration.  You would be able to Reset the computer to Win 10 using the Recovery Manager, however. I am not certain of the reason for the difference in the size of the Recovery media.  I believe that it has to do with the fact that it Recovers the OS and all of the apps, as well as, the Recovery partition.  This would be done on a custom computer. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

Read other 5 answers
RELEVANCY SCORE 35.2

Hello,

I have a Windows 7 network set up and whenever I connect remotely to another computer and lock their input such as their keyboard and mouse, the remote user still has the ability to press ctrl alt del, which then allows them to use their keyboard and mouse. My question is, is it possible to disable the ctrl alt del functionality in Windows 7 so that that Blue security screen does not appear? I have tried lots of remote desktop controlling software which has the option to lock the remote computer input, but they still can press ctrl alt del and unlock their keyboard and mouse. How do I stop this? Thanks!

Best regards,

Jerry
 

A:Solved: Remote Desktop Control ends when remote user presses ctrl alt del

Let's try the Symantec Pc Anywhere.This a very Useful software for remote desktop sharing and file transfer and there is the locking feature...
 

Read other 1 answers
RELEVANCY SCORE 35.2

We're using a Server 2008 r2 Terminal server environment.
I have one particular user (running windows 7 64bit) who's having an issue with a HP laserjet 400 M401 printer. She connects with her local printer set to follow her to the remote session but randomly through her session, programs like word or adobe reader
will pull up another random printer in our network instead of her local one.
For instance, today she pulled up a .pdf and it defaulted to one printer across the complex, then later within the same session she pulled up a Wordperfect document and it defaulted to a copier on the other side of the office.
She's the only person having this particular issue. So far my IT manager rebuilt her local profile (albeit sometime back) and I reinstalled drivers but I'm a bit stumped on which direction to take with this one.
I've ideated on it being an issue with USB cables, Printer memory, account data related, or maybe bandwidth?
Any help is appreciated.
-Eric

Read other answers
RELEVANCY SCORE 35.2

hello, i want to send files from my computer to the remote one but every time i try i open up windows explorer, click on my drive and it freezes up and goes to not responding, then it loads like 5 minutes later, and the process repeats every time i go to a folder, i am connecting to a windows server 2003 computer. can anyone tell me how i can transfer files faster or if there is another way than using windows explorer? thanks a lot!!
 

A:Problem Transferring Files from Local to Remote Computer in Remote Desktop

You are trying to do this over Remote Desktop?
I have used this with Windows 2000 Server and my XP computer. I would assume it will work with 2003 server.
http://www.analogx.com/CONTENTS/download/system/tsdc.htm
 

Read other 1 answers
RELEVANCY SCORE 35.2

The title says it all! Basically I have a comp running XP pro and I want to be able to work locally on one user account, with some kind of remote access server running on another XP user account so that the remote account and the local account can be used simultaniously. I know that this cannot be done with XP Pro remote desktop and could be by Windows Server 2003 remote desktop, but i need an alternate solution to make this happen.

Thanks!

-Jeff
 

A:Alternate Remote Desktop application for Simultanious Local/Remote Access

Read other 7 answers
RELEVANCY SCORE 35.2

Here's the command:
shutdown -r -t 1 -m \\computername
I can ping computername
Windows Firewall is disabled
3rd-party antivirus firewall is not installed
Any ideas how to fix this?

Read other answers
RELEVANCY SCORE 35.2

Hello - I know there have been a number of posts on this subject but I have been unable to find a solution. I have 2 Win7 machines, both running SP1.

My HP Pavilion is running 64-bit and my Dell Latiude E6400 is running 32-bit. I can successfully RDP from my Dell and even my Apple iPad (via an RDP client) into my HP Pavilion. However, the problem is that when I try to RDP from my Pavilion into my Dell I get connected but all I see is a BLACK from the Dell machine. The only thing i can see is the Status bar at teh top telling me that i am connected. A few moments later I get a popup message telling me that the machines have failed to communicate.

I have confirmed that RDP settings are identical on the Pavilion and Dell. I have even downgraded the Dell NVIDIA graphics driver to an older version based on the recommended version on the Dell support web site.

At this point I am at a complete loss on what to try next. I find it very strange.

Any help would be GREATLY appreciated!!!

Thank you.

A:Remote Destop Connects but Remote Host Screen Stays BLACK

Hello,

Temp disable your anti-virus and firewall to determin if this is blocking the ports.

Also, can you copnfirm that you have a password on the PC's user account? Windows wont let you RDP to a PC that isnt password protected.
Dave

Read other 2 answers
RELEVANCY SCORE 34.8

Hiya

The Remote Installation Service enables a TFTP service on the server which by default could allow an anonymous user to potentially overwrite existing operating system files or upload a specially crafted file. This could allow an attacker to compromise operating system installs offered by the RIS server.

Affected Software:

• Microsoft Windows 2000 Service Pack 4

http://www.microsoft.com/technet/security/bulletin/ms06-077.mspx

Regards

eddie
 

Read other answers
RELEVANCY SCORE 34.8

I have two systems, "desktop" and "laptop", peer-to-peer networked on my home LAN both running Vista Ultimate SP1. I routinely use Remote Desktop from desktop to laptop. I am accustomed to simply closing the RDP window on desktop (and perhaps reopening it one or more times) and then if I want to use laptop directly, logging back into it from the Windows login window.

Recently (I apologize, but I can't be more specific) I find that (1) I cannot log back into a session after I have closed the RDP window on desktop, (2) I cannot log back into laptop from its logon window. I also find logging out of the RDP session rather than merely closing the window makes no difference. In either case, when I look at the logon window on laptop I see the message saying a remote user is logged in, and if I try to log in anyway, it hangs indefinitely at the "Welcome" window and must be restarted.

I cannot identify any software change to this system that might be responsible. In fact with the exception of Windows Updates I don't think there have been any. The system is a Dell Latitude D830 and all its drivers are the most current.
 

Read other answers
RELEVANCY SCORE 34.8

Wondering if someone can help me out with this.  I have my Windows 7 Enterprise 64 SP1 box on a domain.  Our corporate office setup a 2008 R2 SP1 print server and created a few queues on it.  When I try to go to start and then type in the
\\servername I get
\\servername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The remote procedure call failed.  When I try to access the same server
from an XP SP3 machine it opens up fine using my same credentials. I have also tried this from another user's machine who has 7 Enterprise x64, whose machine was built differently than mine and I can get to it fine from that system too.  Any ideas what
I am missing here? We run McAfee here and I've tried stopping all the services, and played around with a bunch of other things too, so far to no avail.  Any suggestions would be greatly appreciated. Thanks!

A:Remote Server Not Accessible - Remote Procedure Call Failed

I can't think of any off hand that would restrict just one resource - that's not to say there aren't though.  Here's what you can do to check the Services:
Note that you must be logged in as a Domain Admin or have Local Admin privileges on the machines.
Start up two instances of services.msc.
On one of them connect to one of the Windows 7 machines that is working properly.  The other leave connected locally.  
Now go down the list and make sure the services on your machine match the services on the working machine.  If they don't, change them so that they do.  Pay particular attention to the Server and Workstation services.  Also the Remote Procedure
Call and RPC Endpoint Mapper services.

Read other 8 answers
RELEVANCY SCORE 34.8

I asked a question in another thread wanting to know if there were any good free alternatives to programs PCAnywhere or GoToMyPC. Boy did I ever get more than I expected in TeamViewer that EAFiedler suggested.

Now I have a technical question about how TeamViewer works. It connects to remote systems across the internet not by an IP number that I enter but rather by an arbitrary nine-digit number assigned to the system when the program is set up. It connects so quickly that I know it cannot be scanning every IP address on the 'net looking for a TeamViewer connection at every one of them. So, I have deduced that there must be a server out there somewhere that stores TeamViewer information.

Does anyone know enough about this to confirm this and/or explain it to me somewhat?

Next question: What about security? Are there any security issues I should be concerned about, other than the obvious, of course?
 

A:Technical question about TeamViewer remote access/remote office

Read other 14 answers
RELEVANCY SCORE 34.8

I have a home network of 4 Win 7 computers which I leave running when I'm away from home to provide data to my website, among other things. In the past, I've been using Remote Desktop to access my home computers. It works very well, but it's always a challenge getting everything set up to work right before I go. I was wondering if others who have used Remote Desktop as well as other means of remote access would care to share their experience and express a preference, if any.

Thanks.

A:Care to recommend a remote access method beside Remote Desktop?

Everyone seems to like > TeamViewer - Free Remote Control, Remote Access & Online Meetings

Read other 9 answers
RELEVANCY SCORE 34.8

I have two computers running Windows XP. Let's call them Acquiring and Processing.

Processing has SP3. Acquiring has SP2 and is behind a hardware firewall/router. (cannot upgrade to SP3 due to some software it has to run that will crap out if the computer is upgraded, hence the firewall.)

I configured the firewall/router to give Acquiring a specific address, and to open the port for remote desktop, and to forward anything coming in on that port to the Acquiring computer, which is the only device on that router in any case.

When I go to the Processing computer and try to Remote Desktop to the Acquiring computer, the login window comes up without a hitch. Once I type in the username and password and try to login, however, the desktop of the remote computer won't load. I get the little bar at the top of the screen with the computer name and the option to minimize or close, I can see and move the mouse, but the rest of the screen is completely black. Eventually I just end up closing the remote session (without logging off though, since I am not given that option)

Over on the Acquiring computer, the screen hasn't been locked as per usual. I can still see the desktop, but the computer is frozen. I have no mouse, and I can't even get the keyboard to toggle the lights for numlock and capslock. I then have to do a hard reboot of the Acquiring computer to get it un-frozen.

Can anyone help me try and figure out why this connection isn't working, and what I ... Read more

Read other answers
RELEVANCY SCORE 34.8

Hi all,

So, I have scoured every resource I could find to resolve this, and am just flat out stumped....hoping someone here can shed some light on my problem. Here is my situation:

* I have a SBS 2003 R2 Standard machine running (domain controller, exchange, etc)
* I have 7 XP SP2 clients that are part of the domain
* I have an ASA 5505 firewall running, with an ADSL modem connected to that for WAN access

My problem is related to RWW. From the internet (non-lan connection), I can connect without any issues to the RWW homepage (either as a domain user or an administrator). When I click on "connect to work computer", I am presented with a list of the domain PCs. However, once I click on any of them, I receive the following "VB Script: Remote Desktop Disconnected" error window:

"The client could not establish a connection to the remote computer. The most likely causes for this error are:

1) Remote connections might not be established at the remote computer
2) The max number of connections might be exceded at the remote computer
3) A network error might have occurred while establishing the connection
4) The Remote Web Workplace designated port might be blocked by a firewall
"

Here is what I have confirmed so far:
1) I have opened ports 3389 and 4125 on the ASA
2) I CAN remote desktop directly to the SBS itself (not using RWW)
3) I CAN access OWA via the internet
3) The client computer has been setup to allow remote connections, and I have adde... Read more

A:Remote Desktop Conection through Remote Web Workplace (RWW) stopped working

Read other 6 answers
RELEVANCY SCORE 34.8

February 16, 2010

My problem is this:

I can't run remote desktop connection in my current situation. I'm at home and I'd like to be able to do this.

I have a laptop that's fairly new. It's an HP Pavilion dv6 with an AMD Turioin II P520 dual-core processor that's 2.30 Ghz and it's running Windows 7 Home Premium, the 64-bit version.

I have two computers I'd like to control using my laptop: A Gateway GT5692 running an AMD Phenom 8450 Triple-Core Processor 2.10 GHz that's got the 64-bit version of Windows Vista Home Premium and a HP SR501P with an AMD Athlon 64 X2 Dual Core processor 4200+ 2.20 GHz running the 32-bit version of Windows Vista Home Basic.

All are tied to a router. The laptop runs wireless and the two desktops have a wired lan. All connect to the internet through the router tied to a DSL modem.

I can control the computers using Windows Remote Assistance but not with Windows Remote Desktop connection. What's up with that? http://b.tsgstatic.com/smilies/frown.gif

And when I bring up system properties on my laptop, it has the “Remote Assistance” dialog but not the dialog for “Remote Desktop”. I viewed this on another computer with a video titled “Accessing another computer with Remote Desktop Connection”. On that video, it has the dialog for “Remote Desktop” viewable 50 seconds from the front of the video. I've noticed that this computer's system is “Windows 7 Ultimate” while I'm stuck ... Read more

A:Remote Assistance Works But Not Remote Desktop Connection

Read other 6 answers
RELEVANCY SCORE 34.8

Is there any remote support software that can power on a remote workstation that is powered off?

A:Can Any Remote Support Software Power On A Remote Workstation

AS far as I know there is no software to power up a remote workstation that is not on. I could be wrong though it has been known to happen ... once .... I think or was I mistaken?

Read other 3 answers
RELEVANCY SCORE 34.8

So, I had remote desktop working on my computer for about two years and now it doesn't work anymore. Every time I try to access it from another computer (I don't have and don't know how to get a domain name, so I just use my IP address, which I get from whatismyip.com), I get an error message saying I cannot connect to the remote computer.

As far as I know, I have done everything right. I enabled remote desktop in system properties, I created a static IP address in TCP/IP properties, and I configured my router to forward the default port (3389) to the correct local IP address I specified. I have disabled windows firewall and put mstsc on my list of exceptions for the firewall that I use (BitDefender). I also pinged my IP address and received all packets sent.

I am running windows xp professional with sp3.

Any suggestions?

A:remote desktop problem: cannot connect to remote computer

try using the computer name to connect right click on the my computer icon and select properties and then the computer name use the full computer name. while your in there check the remote tab make sure the allow user to connect remotely to this computer is checked. on both pc's. also make sure both machines have xp pro i know you can only go one way between pro and home edition can't remember which.

Read other 14 answers
RELEVANCY SCORE 34.8

OS: Win8 64bit (My desktop is Win8, my laptop is Win7. We're dealing with the desktop here.)
Where I am: university network, but these features seem to be working with my laptop.
Things I've checked: allowing services through Windows Firewall (Bonjour, WMC services, etc.)
Allowing remote services in System Properties
Many, many existing threads and non-solutions
How I'm feeling:
None of these features or applications work, and they're all supposed to function differently from one another (e.g. WMC doesn't use the Apple Bonjour service, so it isn't a program-specific problem). I just want to control my media system with my desktop
Is there some obscure service or file or setting that I'm missing that could prevent any remote applications from working?

Read other answers
RELEVANCY SCORE 34.8

I am running a wireless Network with D-Link 714P+ Router. My PC is wired to the Router, with 2 other computers running wireless. I am running XP Pro.

When accessing my PC (or at least attempting to) from a remote Computer using Remote Desktop, I think I have to add something after the IP Address when typing in the Computer Name/IP Address. I have RD working successfully within my Network. Can someone clarify what I need to do here to access my PC through the Internet then Network

(Even though I have got this far with setting up my network, please go easy on me with the computer lingo)
 

A:Solved: How do I access my PC in a network using Remote Desktop from remote PC

Read other 10 answers
RELEVANCY SCORE 34.8

This morning, I heard a nationally syndicated computer expert state that some Chinese hackers were "getting into" Windows based computers through "Remote Access/Remote Desktop" even if the service is turned off. According to the guru, "They will turn it on for you."
Being very concrete, as well as, somewhat dull concerning computers, I find this hard to believe. Could someone, in layman's terms, tell me the circumstances needed that would allow a hacker to take control of someone's system when a necessary service is turned off ??

A:Infection Of Windows Through Remote Access/Remote Desktop

Easy to do and best NOT described here.

Read other 5 answers
RELEVANCY SCORE 34.8

We have several remote systems that can all connect fine. I am having an issue with one box. It is a windows 7 home premium machine with netgear wireless nic. When I open mstsc to connect to a remote machine I put in the ip address and click on connect. I receive an immediate failure with the text "This computer can't connect to the remote computer. Try connecting again...blah blah"

I have a server 2008 r2 with Network level authentication enabled. I have 8 other systems that are hardwired, at different geographic locations and all connect fine.

I have not made any changes on the server side since this problem seems to be local to this client only.

On the client I have made the following changes/observations. I have disabled the firewall, cleared the remote desktop cache, remove the MRU entries from the registry, verified that port 3389 is open via telnet. I have been bashing my head for days trying to figure out why this one box is not working. The problem occurs for every user on the box including the admin.

I don't receive the box that prompts for warning if there is a server authentication issue but I think that is because I selected ignore at some point and said yes to continue. I'm not sure where that cache resides to delete that selection. I'm not sure if that is where my problem lies or not. Can anyone please assist?

A:Remote Desktop Client 6.1 Cannot connect to remote computer

Welcome to SF,

From the Remote computer please try this, if unsuccessful please post back.
Click on Start and type secpol.msc. Then go to Local Security Policy=> Local Policies=> User Rights Assigment=> Choose Allow Log on Locally and select the User or Group that needs to access this computer remotely. Also select Allow Logon to Remote Desktop Services (if you have RDS or Terminal Services configured in your Win08 Server). Try to remote connect after.

Read other 1 answers
RELEVANCY SCORE 34.8

Remote Desktop Connection wants the IP or name of the remote computer to connect to. But suppose the remote computer is behind a router. The router has one WAN IP, say 192.45.63.98, which will be the same for all the computers connected off of that router, (when you google "my ip" from any of them) and then each computer connected off of the router will have a LAN IP, something like 10.0.0.6. So if I want to help the person connected to the 10.0.0.6 computer (and not the person connected at 10.0.0.9) off of this router what do I tell Remote Desktop Connection at my computer to reach them?

Thanks.

A:Identifying remote computer for Remote Desktop Connection

I would use teanviewer its a lot simpler to setup

Read other 5 answers
RELEVANCY SCORE 34.8

My dad is in his 90's and very computer illiterate. He's had a computer for a few years that he uses for email and web browsing.

In the past, when he runs into problems or has a question, I've been able to connect to his machine using Remote Desktop Connection.

I just bought him a Dell computer with WinXP (Home edition) for Christmas, and I'm unable to install Remote Desktop Connection on it, because it tells me that Remote Assistance is already installed. Thing is, I don't WANT to use remote assistance. It's an extraordinarily complicated process for a guy pushing a century old. With Remote Desktop Connection, he just turns his machine on and I can connect.

I've looked everywhere, but I can't figure out how to uninstall Remote Assistance.

Does anyone know how to do that, or is there a way that I can install Remote Desktop while Remote Assistance is there?

Thanks for any help you can give.

A:Toss remote assist - install remote desktop?

Correct me if i am wrong anyone... i am only learning about things like this myself

As i understand remote desktop connection is only the client side package which when installed would allow your dad to connect to your PC and not you connect to your dads, so the package would not be any use to you anyway, you need your dads PC to act as a server not a client.

Also as i understand, remote desktop server software comes as an Windows XP Professional version feature only ... which version of windows does your dad have ? if it is the Home Edition then im not sure if you can get this to work the way you want, you might have to look at third party software solutions, from the top of my head a program like VNC server would do it which i have only used briefly in the past. http://www.realvnc.com/what.html << think this is the website

Hope this has helped.

Read other 2 answers
RELEVANCY SCORE 34.8

Hi. I just viewed Kari Finn's clearly explained Remote Desktop Connection on Win10 and how to connect to remote computer, thank you for that. Good job! In my case though, I use Win XP Home edition. Do I have to have Win XP Pro edition to connect on RDC to Win 10 host using Hyper-V virtual creation?
Also, if that is the case, how can I reboot my remote computer XP OS and get onto the Start Up Menu page? The keyboard command is released to my Win 10 host computer on start up and I don't have access to keyboard commands (such as F8) until Win XP has been fully booted up. How do I access that Start Up menu page otherwise?
This would be helpful for me to know. Thanks.

A:Remote Desktop Connection Explained - Question remote XP?

Hi Hibs, welcome to the Ten Forums.

You simply cannot use Windows XP Home as remote host, meaning you cannot connect to it using the Remote Desktop Connection. There are some hacks around the Internet but I very strongly advice against them.

(From Remote Desktop: frequently asked questions)
A workaround, in case you have or can find a valid Windows 7 Professional or Ultimate license is to install Windows 7 on a Hyper-V virtual machine, then install Windows Virtual PC and Windows XP Mode on that virtual machine. Works perfectly giving you Windows XP Pro SP3.

If the mouse and keyboard are released by the Windows XP vm back to host, you simply need to bring the pointer on the vm and click to get them back to vm. The F8 keyboard shortcut when booting XP up works then totally normally bringing up the advanced options boot menu:


To release the mouse and keyboard back to host, press CTRL + ALT + LEFT ARROW.

Kari

Read other 1 answers
RELEVANCY SCORE 34.8

Hi,

I've searched the internet and I can't find a solution. I've long been using Windows 7 and never had any problems with Remote Desktop from outside my network however I don't use it frequently so it is several months since I last used it.

When I right click on Computer -> Properties and Remote Settings

The lower part of the screen where you specify your remote desktop settings is missing. The issues that I've seen regarding this have two solutions typically.

1) The TermService is not running. It is my case.
2) That the DWord value should be set to 0 in the registry for tfDenyTSConnections

I have attached a screenshot confirming all this.

Anybody any advice as to what to try next?

A:Remote Desktop Missing In Remote Settings Screen

what version of windows 7 do you run?

Read other 2 answers