Over 1 million tech questions and answers.

HP Pavilion 15 hdmi output

Q: HP Pavilion 15 hdmi output

Hi allI have an HP Pavilion 15-bc000nx with Integrated Intel HD Graphics 530 and a dedicated GTX 960M (4gb). I want to use the HDMI out to use my (1080p) TV as a monitor to watch a movie or play a game while closing the laptop lid. When I do so, the game becomes very laggy and slow (unplayable).When I run Fraps it give me 60 fps !!!!This happens also when I open the lid and choose duplicate displays and adjust the resolution to 1080p, as well as when I close the lid and choose show display 2 only (the TV). In both cases.When I play the game while duplicating displays it runs ultra smooth on the laptop display and at the same time still laggy and jittery on the TV, yet both diplays give 60 fps !!!! I am sure it is not a hardware problem, but how to solve this problem?? Any kind of adjustments or settings I can modify?(N.B. I tried uninstalling the drivers and reinstalling the new ones for both intel and nvidia from HP website, also I tried another TV) Hope someone would help meThanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Pavilion 15 hdmi output

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 73.6

I would like to know if the HDMI on the HP Pavilion 15-n248sa is an input or an output because I can't find it on any specifications.

A:HP Pavilion 15 hdmi input or output

Hi, The HDMI port on your notebook is output only. Regards, DP-K

Read other 1 answers
RELEVANCY SCORE 61.6

I have had my Thinkpad connected to a Samsung TV via HDMI cable (through a Thinkpad dock) for months with no problems. After the latest Lenovo updates (see attached screenshot file) my Thinkpad intermittently fails to recognize the Samsung TV as an audio output... it does not register as an audio device in audio settings nor in control panel, yet it does still connect to the TV as a 2nd monitor and video works fine. It seeems to alternate every other time that I boot up the computer. One boot-up it fails to recognize the TV as an audio output, then I'll reboot and it works.

Read other answers
RELEVANCY SCORE 61.2

GA-890GPA-UD3H (rev. 3.1)

GIGABYTE - Motherboard - Socket AM3+ - GA-890GPA-UD3H (rev. 3.1)

(Note 3) Simultaneous output for DVI-D and HDMI is not supported.

What I'm trying to do is output just my sound to the receiver via HDMI cable, but still use the DVI to my monitor for video. From the note above taken from the MB specs, sounds like this is not possible.

This is new business to me and wondering how others do this, seems little information I can find. I am ordering a HDMI to DVI cable so I can disconnect the DVI cable from the computer and instead run both video and sound through HDMI to the receiver, then the video to the monitor. Hoping this works.

If all fails then I am relegated to separate digital through S/PDIF optical link, to my receiver. According to the experts this is less than ideal since now, the multi-channel dolby and DTS signals can only be received via HDMI.

Wondering if I get a Blu-ray player for my computer how this is going to all work out. Hoping that HDMI to DVI cable does the trick.

Anyone with experience with this kind of set-up and the aforementioned hardware greatly appreciated.

And Happy NEW YEAR!

A:Gigabyte HDMI output to Yamaha receiver - no sound output

As you have a separate video card, its capabilities should determine how the video works, not the motherboard. The video is routed to the video card.

If you had some type of integrated Video on the motherboard then the motherboard's specs would apply. For example, I have an Intel i7 3770 CPU and this model has built in Intel HD4000 video which is routed to motherboard video connectors and thus the motherboard would determine how the video is distributed. However, I'm using a separate video card and thus that determines how video is distributed.

Read other 5 answers
RELEVANCY SCORE 60

Hello guys!

I recently ran into a problem with my main LCD TV(I need to replace the power supply.) I use that LCD TV for my desktop computer, and right now all I have is my laptop. I use synergy to control both computers. However now it doesn't matter because I cannot see the desktop portion. Is there anyway for me to output my desktop computer to my laptop monitor?

Both my Desktop and Laptop have HDMI input. I also have the HDMI cord on hand right now I just don't know how I'd go about setting it up. I'd like to use synergy to control the desktop AND have it's output be on the laptop until my power supply arrives and I can fix my TV.
 

A:Solved: Output Desktop HDMI to Laptop (which has HDMI input)

Read other 9 answers
RELEVANCY SCORE 59.6

I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.

I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.

So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.

I have no idea what's relevant, so I don't know what to post screenshots of, but I've read tons of other threads with the same issues but none of their solutions seem to work for me.

A:Realtek HDMI Output ATI HDMI Audio -Not Plugged In-

Info on your computer would help. We can only talk in generalites or suggestions without it. In most cases, if you have a full HDMI port with both audio and video, when you plug in an HDMI cable Windows changes the default audio playback device from the "Speakers" (your PC sound card) to "HDMI".

In your case the ATI (now called AMD) should be the device that is feeding the video and audio.

As your PC is only 1 month old, the PC vendor's tech support should be the ones to call since you haven't been able to find a solution to date.

Read other 2 answers
RELEVANCY SCORE 56.4

Hi,

So eagerly i tought to buy this cool looking laptop for a huge $2000 i needed it to output to a hdmi monitor ot TV so sometimes i could see movies as well, now i had to buy the special DA200 dell adaptor and in the past 3 weeks it`s been a complete nightmare, i WAS NEVER ABLE to make it work permanently. The chat support was no help at all usually simply resuming to try and replace the part but i do think the part is good and i didn't feel like waiting 2 weeks for it to ship from china.

The ethernet and usb work on the DA200 adaptor , EXCEPT HDMI.  SOMETIMES it would work briefly until next restart, i had tried everything ever available on the internet. The laptop is running Windows 10 (as it`s restricted to that version, i tried to install other versions with lots of issues and compatibility issues) so  i have installed reinstalled and installed different versions of the video driver for all possible windowses and none worked. what did work was very brief until next restart and that usually happened when i had a fresh windows install, after the first restart i will get a non working hdmi again.  

I have tried several hdmi cables so i know it`s not the hdmi cable or the tv ot the monitor. and nobody seems to be able to help!!

A:dell xps 13 9450 (2015 new version) does not output HDMI to tv or monitor via special dell DA200 Hdmi adaptor

Oops I see my first post got sent, even if the website failed...
Anyay.. I talked to Dell Support and they told me to update the firmware for:
Intel (R) Thunderbolt 3 Firmware Update
(version 02.05.04,A00)
downloaded forn Dell.com/support
Enter your service tag and you will find it under Chipset on the driver download page.
That fixed it for me!
It was a known issue for the guy i talked to.

Read other 9 answers
RELEVANCY SCORE 53.2

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

Read other 3 answers
RELEVANCY SCORE 52.4

I have been trying for 2 week, to no avail, to connect an external monitor to extend my desktop to my ASUS ET2203 through an HDMI cable to an ASUS VE245HA. My graphics card is an ATI Radeon Mobility 4570.
I have:
updated the drivers and Catalyst Command Center
Changed cables
Attempted to force output, but the only output available i through VGA, and it will not output anything
Reset my whole PC to factory setting just in case
Spent over an hour with tech support, who claims it should simply plug and play.
Screwed with the output resolutions.

Nothing has helped.

When i connect the hdmi cable to the back of the PC, there is no automatic discovery in windows.

Any help would be greatly appreciated. Thanks

A:No HDMI output

have you checked your bios settings?

Read other 4 answers
RELEVANCY SCORE 52.4

What type of hdmi is on the HP Pavilion 17-ab202na, does it output 4k @60hz?













Solved!

View Solution.

A:Hdmi output

Many thanks!

Read other 4 answers
RELEVANCY SCORE 52.4

(computer specs in profile)

i recently bought a decent hdmi cable to go from my laptop to my tv, for the first few times, it worked but now i just cannot get the picture from my laptop to my computer, ive tried using FN and F1 as it is on my laptop, this doesnt work. i also tried going to 'connect to a projector' and 'connect to an external display'.. and still, this didnt work, any help will be much appreiciated.
 

A:hdmi output

Read other 6 answers
RELEVANCY SCORE 52.4

Hai all... After upgrading to Win 8.1 64bit, my HDMI output can't display/work. I'm trying to connect to TV via HDMI converter (HDMI to AV RCA (yellow-red-white). Anyw, the VGA output (extend/duplicate display to 2nd CPU monitor) work just fine.  My notebook:HP 430 Notebook PCModel #: LV435PASerial #: 5CB1279DJG This model has Intel HD 3000 and Radeon 7400M Thanks alot  

A:HDMI no output

Your notebook was not supported by HP for upgrading to Windows 10. The last OS that was supported was Windows 7. You can try the most recent driver download from AMD. 

Read other 1 answers
RELEVANCY SCORE 52.4

hello all,  i have a hp dv6 7029wm laptop,  and the Hard drive is starting to fail pretty hard core, so i went today and bought a SSD for it,  
 
wait first let me say this,  the screen is gone *like cracked and all white with black spots all over cause it was dropped*
 
anyways, i installed the SSD onto another computer to install windows 7, which went smooth as possible,  i put the SSD into the laptop and powered it on i hear the windows sounds and all i can see little movement on the laptop screen, 
 
My main problem is when i plug the HDMI or the VGA in, nothing happens on either screen,  So i was wondering how can i go about getting this fixed so i can install the correct drivers and have a somewhat normally functional laptop.
 
 
ive tried installing the laptop drivers while the SSD was in another computer * does not work  computer just crashs due to wrong drivers being installed* 
 
 
I cant think of anything and time is ticking with this old hdd * which i am currently using. * yes i know not the best decision ive made.*
 
any ideas i can use?

A:New SSD/No HDMI output

Could I install the basic display driver from microsoft? would that work as a temp fix till i get drivers installed

Read other 4 answers
RELEVANCY SCORE 52.4

The HDMI output from my Inspiron 15 7560 is not working since the last Widows 10 update.
My machine has Nvidea GeForce 940MX and Intel HD Graphics 620.
Can anyone help?

Read other answers
RELEVANCY SCORE 52.4

My HDMI output is not working after recent Windows 10 update?

Read other answers
RELEVANCY SCORE 52.4

ACER Aspire 5810TG, windows vista home premium. HDMI cable linked to Tecknika TV. Video works, sound has worked through TV until today at it won't pick up that it's plugged in. Tried rebooting. Tried disabling and enabling, uninstalling and installing Realtek HDMI output ATI HDMI audio. Out of ideas...HELP! =]
 

A:HDMI output

Can you use the keyboard fn key + another key (whichever one allows you to output the video to another screen)? If you don't know what I'm talking about, there is a keyboard combination which shows a screen that says computer only, duplicate, extend, or projector only. This allows you to direct the video, so you could have the screen show on both the computer and the tv, just the tv, just the computer, etc. It is the fn key + one of the f keys. Mine is f7, but yours probably isn't the same. Just try messing around with the fn key + one of the f keys to get the duplicate, extend, computer only, projector only screen.
 

Read other 1 answers
RELEVANCY SCORE 52.4

Just recently I tried to connect my laptop to my TV via the HDMI socket but nothing worked no sound or picture it used to work but haven't  tried since upgrading to windows 10 any ideas anyone. Thanks

Read other answers
RELEVANCY SCORE 52.4

Hi All

My first post :


Will be buying a new HD monitor, but I do not have HDMI out or DVI-D out from my CPU so what do I do .Right now I only have VGA output.
 

A:How to take HDMI output from old CPU which has only VGA

http://www.newegg.com/Product/Product.aspx?Item=N82E16812119395
^
there are vga to hdmi cables, but they WILL NOT WORK. you MUST buy an actual converter like above to convert an analog signal (VGA) to a digital signal (HDMI)
 

Read other 46 answers
RELEVANCY SCORE 52.4

How can I check whether my HDMI output is broken. When I connect external display says "no signal"

A:HDMI output

Hi,Please try to hit F4. By the way: What is your computer and its Operating system ? Did you downgrade/upgrade your machine ? To help us answer question quicker, please read this:   http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/HelloRegards.

Read other 2 answers
RELEVANCY SCORE 52.4

Hey, i have an nVidia Geforce 9200 integrated graphics card in my Acer X1301 system (Windows 7 32 bit). Its being used as a home theatre system that has a plasma screen plugged in via HDMI cable and the tv is connected to a home theatre system via a optical cable.

I am having trouble getting the computer to send 5.1 audio... i have plenty of 6 channel movie files and DVD's but none of them play, if i look at the sound device in device manager 'High Definition Audio Device' it is set as the default and works find using stereo... the device details say that the max channels is 2, i have tried nVidia audio device drivers, Realtek HD device drivers but all only allow 2 channels, is there a way around this???

Ive spent the last 8 hours straight trying to fix this so any help would be great!!!

Thanks, Paul.

A:HDMI 5.1 Output

  
Quote: Originally Posted by rrafluap


Hey, i have an nVidia Geforce 9200 integrated graphics card in my Acer X1301 system (Windows 7 32 bit). Its being used as a home theatre system that has a plasma screen plugged in via HDMI cable and the tv is connected to a home theatre system via a optical cable.

I am having trouble getting the computer to send 5.1 audio... i have plenty of 6 channel movie files and DVD's but none of them play, if i look at the sound device in device manager 'High Definition Audio Device' it is set as the default and works find using stereo... the device details say that the max channels is 2, i have tried nVidia audio device drivers, Realtek HD device drivers but all only allow 2 channels, is there a way around this???

Ive spent the last 8 hours straight trying to fix this so any help would be great!!!

Thanks, Paul.


Try here: Home Theater Computers - AVS Forum

Read other 1 answers
RELEVANCY SCORE 52.4

I've just got a new laptop a Samsung RV418, which has a HDMI output. I've tried to get a picture from the laptop to my TV but with no success. The Fn4 key only toggles between the laptop screen and an external monitor but no picture arrives on the TV.

Any suggestions on how to get the HDMI output. I've checked the HDMI cable is OK and that i have specified the right HDMI input on the TV. I am using Windows 7 Ultimate.

A:How do you get HDMI output

Hi Chris, welcome to the forum

If you right click on an empty part of the screen and select screen resolution. your TV should show up here it may need activating see piccy.

I hope this helps

Read other 4 answers
RELEVANCY SCORE 52.4

I need to connect an additional monitor to my new All-In-One touch screen desktop but apparently there is a setting to configure the HDMI port as output. Can anyone help???

Read other answers
RELEVANCY SCORE 52.4

I just bought myself a new Samsung 42 HDTV to use with my ATI Radeon HD 4350(?)

Question is, does my pc now output its graphics in HDMI, or only when i watch HD movies through it? I've looked and looked but no dice so i thought i'd ask you bunch of experts

A:HDMI Output?

Your PC outputs it's video signal via whatever cable is connecting the graphic card to the display. If you have it connected via HDMI then your PC is outputting the video via HDMI. HDMI is just the name of the interface. Whether you're watching HD movies or not, the signal is still being output through HDMI. Your PC doesn't output "HDMI". If it's connected with HDMI, then it outputs in "digital" as HDMI is a digital interface.

Read other 4 answers
RELEVANCY SCORE 52.4

Hdmi cable to my tv doesnt work, tried everything.

Read other answers
RELEVANCY SCORE 52.4

I can not get the HDMI jack to output to my TV.Is there some setting I need to be changing?I assumed it would work as soon as it was hooked up.

Read other answers
RELEVANCY SCORE 52.4

ok recently on 1 of mu computers i brough msi geforce 9500gt with HDMI output for TV
so the problem is i dont have hdmi slot on my tv is there any chance i can get some converter cable from hdmi to svideo coaxial etc
i just want to watch video from my pc on my tv i am not rushing for hdtv yet
sorry for language i do my best

thanks guruman
 

Read other answers
RELEVANCY SCORE 52

Hi, is it possible my notebook's HDMI port to output at 2560x1080? 15-g004nt, Windows 10?Thanks.

A:HDMI output for 2560x1080?

Hi, No, it only supports up to 1920 x 1200 (or 1080). Regards.

Read other 1 answers
RELEVANCY SCORE 52

Hello, please help.

I have my laptop Dell Studio connected to Hitachi HDTV input, the problem is that the TV displays picture (although not in full recommended resolution, not sure why either), but the sound is not coming out from the TV speakers. The audio device manager shows as if sound is being used, the little green bars move up/down when something is being played but no actual sound is heard.

I have attached a picture of the audio device manager page to show you how is configured right now.

I'm desperate and I don't know what to do.

A:No sound on HDMI TV Output

Please somebody help!

Read other 4 answers
RELEVANCY SCORE 52

I have a gigabyte GA-MA785GM-US2H motherboard with onboard radeon hd4200. It has built in HDMI out. The trouble that I am having is that at times, randomly it wont detect anything being detected over HDMI and will swap over to VGA mode. Best case scenario I would like to force HDMI output no matter what, if not I was able to connect a VGA cable to my display however the resolution is different. If I must do it split like this I would like to be able to run two separate resolutions. I would like 1080p over the hdmi and 1600 x 1200 over VGA as opposed to being forced to max out the VGA resolution and carry it over to the HDMI, Thanks for the help.
I have already swapped out HDMI cables.
Adam
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) 9650 Quad-Core Processor, AMD64 Family 16 Model 2 Stepping 3
Processor Count: 4
RAM: 3581 Mb
Graphics Card: ATI Radeon HD 4200, 512 Mb
Hard Drives: C: Total - 238472 MB, Free - 115504 MB; F: Total - 238472 MB, Free - 80899 MB; K: Total - 2861575 MB, Free - 874552 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-MA785GM-US2H
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Force HDMI output

Output is based on a device being detected as being connected to that port during startup. If a device is not consistently being detected, there are three likely causes: motherboard/HDMI port, cable, TV/monitor.

As for using two devices, simply configure the desktop resolution/settings for each device. Windows should remember the configuration.
 

Read other 2 answers
RELEVANCY SCORE 52

first heres my specs
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , 32 bit
Processor: Intel(R) Celeron(R) CPU 743 @ 1.30GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 1978 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 797 Mb
Hard Drives: C: Total - 238372 MB, Free - 69621 MB;
Motherboard: Acer, JM11-MS, Base Board Version, Base Board Serial Number
Antivirus: avast! Antivirus, Updated and Enabled

for some strange reason unbeknown to me my HDMI port just stoped working out of the blue the system was still under warrenty and i thought it was a hardwear problem so i sent it in for repair just got it back today but still nothing i have tried different cables and also different ports on my tv also i went to the acer site and DLed the driver pack for the VGA which had old drivers inside it installed those and still no luck not sure exactly what hardwear to remover from the devie manager to try and just reinsatll it mayb e that will work any other ideas besides a system wipe
 

A:HDMI output problem

well I want to thank all 87+ people who have viewed this forum and i just want to say **** you thanks for not helping
 

Read other 1 answers
RELEVANCY SCORE 52

Hello, friends!
I'm tired off looking for answer.
So I came here to look for help, I know you're smarter than me.
I have ASUS Notebook X53U - SX155V
So my problem is AMD HDMI Output - Not Plugged In . And my PC don't have sound at all. Even microphone don't work. I think it's not drivers fault, because I reinstall them for few times. But maybe I can't get the right drivers..
So.. I'm worried about this:
I think you understand, what's the problem.
And this pic (I'm not sure how to tell about it, because of bad english, but I hope you understand)
This error apears when I want to turn on songs on WinAmp

Please help me!

A:AMD HDMI Output - Not Plugged In

Uhmmm if it's hooked up to the TV you need to Disable the on board sound and the AMD card will automatically kick in

You have to disable the onboard to use HDMI sound from the card and when your done unplug and re enable onboard sound

Read other 1 answers
RELEVANCY SCORE 52

I need to have HDMI ouput from my pc so that I have best image on my new HDMI monitor. I am not into gaming.What is the easiest and cheapest way to achieve this.Thanks.

A:HDMI output for HP p6205uk

Hi, There are few cheap and very simple USB adapters on the following link:      http://www.newegg.com/Product/ProductList.aspx?Description=video%20card%20hdmi%20output&Submit=ENE You can also buy PCIe card but you may need to change PSU too and this will cost more. Regards.

Read other 1 answers
RELEVANCY SCORE 52

I have Windows 10 64-bit  (not suported I know )  but also Windows 7 64-bit (different partitions). Just obtained secondhand GNR TS702 monitor https://www.manualslib.com/manual/271588/Gnr-Ts702.html . It is plug and play no drivers. First question then is what graphics drivers should I have ? There are three listed at http://support.hp.com/gb-en/drivers/selfservice/hp-pavilion-g6-1300-notebook-pc-series/5186808/model... AMD High-Definition (HD) Graphics Driver     9.0.0.0    299.2 MB    Oct 18, 2012     AMD High-Definition Graphics Driver     8.882.2.0 Rev.    339.0 MB    Oct 24, 2011    and Intel High-Definition (HD) Graphics Driver. Does this depend on the processor ? It is Intel B960. Second question, should I expect system audio to come out of the HDMI  port and work with the speakers on the monitor?  Windows Sound sees an HDMI playback device but nothing connected to it, even when a DVD-VI cable from the monitor is connected to that port. Do I need and special drivers for HDMI audio, if I happen not to have a monitor that supports it, or is that HDMI port video only? Thanks  a lot.   

Read other answers
RELEVANCY SCORE 52

Hello, I recently bought a Sapphire hd4890 and was briefly able to use the card's built in audio function via an hdmi cable to my television. I stopped for roughly a week and when I next tried to use the sound again, it didn't work. Within that period of time, I installed some Realtek drivers for my audio so I could have that cool function where when a new device is plugged in, it is detected and a menu comes up. This shouldn't pose any problem with my previous setup explained though, should it? When I right click the volume function in the Quick Launch area, and go to "Playback Devices", I am able to see my ATI High Definition Audio Device (with a picture of my television) but it says below, that it is not plugged in (im running windows 7 if that offers any help). Thanks to anyone who can lend a helpful tip in my strange predicament.
 

Read other answers
RELEVANCY SCORE 52

Hello Back with Big Problem.

Terrible sound lately and found out this problem. Now I did a lot of finding out and know now I need to change things in my BIOS.

Normally by using the F2 command on starting ( Dell inspiron M501R ). Well, it opens but the arrows don't work.

I am on windows 7 sp 1 64 bit. Is there any other way to get into my BIOS ???

Cannot look or listen to any thing with this horrible noise. It started from one second to the other while looking to QI.

Already, thanks for your help and time,

Thelma

A:ATI HDMI output is unplugged

Thelma just how old is this machine? - a Google is telling me it is from around 2010 so I am thinking the CMOS battery may be a tad under voltage (it controls the BIOS)

Now a few more specs would be nice too
System Info - See Your System Specs

Unfortunately I don't know of any software that will show up volts within a laptop - apart from taking it apart and physically measuring that battery with a multimeter.

Read other 9 answers
RELEVANCY SCORE 52

Hello people,I have an old compaq presario cq60 and is running windows 7 64 bit. The problem is that when I hook up a second monitor it does not display the screen, I can see that it is being detected but nothing happens.I found an old post concerning the same issue but that one was locked so I started this new post because the link in that post was gone.I hope anyone can help.Thanks!

Read other answers
RELEVANCY SCORE 52

Hi, I would like to by a HP all-in-one 24-g050ur (X0X16EA), Product ID. 75422, and I need to know if the HDMI port is Output or Input, in case I would like to us it as monitor for a second computer as well.Thank you! ND I could not find the information between the specifications of the product on your web page.

Read other answers
RELEVANCY SCORE 52

So I'm using an M73 Mini Tower with 1 VGA and 1 Display Port output as a PC for a dashboard that's to display stats and different data refreshing in internet browser windows. Our IT department has purchased two VIZIO 50' TVs and we have the PC mounted behind the TVs which are also mounted on the wall. We have one of the TVs connected by using a DisplayPort to HDMI cable and it has an active video signal. Here's the problem. We're trying to get the other TV connected as a second monitor through the TV's HDMI input, but the TV doesn't recognize the PC output. We've tried using a VGA cable with a StarTech.com HD2VGAMICRO converter. We've also tried a VGA to RGB converter cable which also failed miserably. Any suggestions?
 
 
Mod:  edited title for clarity











Solved!
Go to Solution.

A:M73 Tower - Output to 2 HDMI TVs

You've got that Startech adapter backwards.  It is FROM HDMI TO VGA, not the other way around.
 
You can't feed an HDMI display device from VGA onboard.  Your easiest solution is just to install a discrete graphics card (which I'm guessing you don't have in your M73).  Something low-power like this Sapphire AMD low-profile R7-250 is modestly priced, and comes with both low-profile and full-size brackets.
 
Since you have a mid-tower case, your options go beyond this suggestion, but you have to stick with a low-power card.  Somewhat more expensive is the Gigabyte GTX 750ti OC card, again with low-profile or full-size bracket.  Better performance specs than the AMD card, but you may not need its performance.
 
Finally, there is the low-power EVGA GTX 750ti SC card, which is full-size but shorter.  Best performance, but again a bit more money.
 
I don't know anything about the inside of the M73, but the description talks about "half-length full-size PCIe x16" expansion slot.  I don't know what "half-length" might imply, but the full-size EVGA card is actually the "shortest" of the three so it is actually the most likely to fit in your case.  The first two are low-profile height cards and are thus longer but less high.  All three are under 60W power and should work fine with the PSU of the M73.
 
All three of these cards have multiple digital connectors (HDMI, DP, and DVI) and no VGA connector.  The AMD ca... Read more

Read other 2 answers
RELEVANCY SCORE 52

Sorry if this is a long winded question.

When I use DVI output my monitor allows me to choose from certain presets like "game" or "movie" that effect brightness etc. There is a "Dynamic contrast" preset which gives by far the best colours, however it is no good for even mildly dark scenes. However if I use HDMI output I cannot choose them as the colours seem much better and choosing the preset is not necessary, it looks as good as DVI using "dynamic contrast" and works in dark scenes perfectly.

When using DVI, I am on my PC as it has no HDMI output. When using HDMI output I am using the PS3 which has no DVI output. In both cases I am using the same monitor.

Now to my question, if I buy a DVI to HDMI cable, will the output of my PC be the same as the output of my PS3? ie perfect colours/brightness from using HDMI?

Thanks
 

A:A question about DVI and HDMI output

The answer is probably. Your monitor probably isn't smart enough to be able to distinguish between a DVI to HDMI converter cable and a regular HDMI cable. But you simply will not know for sure until you try. For some reason your TV manufacturer decided that you would not be allowed to fine tune the picture while using DVI or maybe the DVI connector simply bypasses the "fine tuning" circuits.

I have a both a DVI and an HDMI output on my video card, but my monitor (32" JVC TV) only has HDMI inputs and I'm currently using a DVI to HDMI cable to run the video to the monitor. The TV allows me to make any adjustments using either a HDMI cable or a DVI to HDMI cable, but the video is brighter when using an HDMI cable.
 

Read other 2 answers
RELEVANCY SCORE 52

Hello everyone,
I have a problem with my HDMI output. I have a Dell Inspiron 1525, running Vista Home Premium 32bit. I recently discovered that I can hook my laptop to my 60in LG Plasma display via HDMI and do homework large and in charge. Unfortunately, it has stopped working.

Everything worked fine for a few days, I just plugged my cable into the back of the tv, clicked "Connect to Display" in my "Personalize" window from the desktop right-click drop-down menu and everything worked perfectly. I have not adjusted the refresh rate or resolution or any other setting for that matter.

When I came home from school today I repeated all the same steps but now when I plug the cable into the computer, the sound (when you plug into a port aka. dooDEE, I know, I'm nuts, just say it to yourself) keeps going back and forth between plugged in and unplugged (DEEdoo). Repeatedly over and over as if I would keep plugging it in and unplugging it again. (As if there is a problem with a driver)

I have searched all through the device manager for !'s and disabled the HDMI Audio Output Codec then re-enabled, as well as reset my plasma display to default settings. The personalize panel also cycles through "Display Connected" and "No Display Detected" during this time.

Please, if you're a guru, extend some help, if you're gonna ask if the tv is plugged into the wall, don't waste our time. Any help from knowledgable sources will be much appreciated ... Read more

A:HDMI Output Problem, PLEASE HELP

hi, have you tried updating the graphics drivers, most of the time, the drivers are most usually at fault as you've stated previously
http://support.dell.com/support/down...&fileid=245580

Read other 2 answers
RELEVANCY SCORE 52

Hey

So I wanted to connect my LG tv to my laptop today, and when I plug the HDMI and duplicate the screens, I can only hear the sound thru the TV, the image is blank(screen says No Signal), I've tried restarting computer with the HDMI cable and it shows the Starting Windows loading screen on the TV before you reach the login screen, but when you reach the login, the screen just becomes blank..
I have already connected it to the TV before and it worked fine, there wasn't any hardware changes and the cable is fine because I just tested it with my Blu-Ray Reader.

Any suggestions?

Thanks in advance
Quetzalma

A:Problems with HDMI Output

Please fill out your specs. Your manual is your best place to see how the LG is hooked up to a PC, not all of them use the HDMI for this most use a DVI or VGA connection, HDMI is, as you have just confirmed, used for audio if no other source is used. I have had no issues using a DVI-VGA connection to my 37" Vizio.

Read other 4 answers
RELEVANCY SCORE 52

Okay so, my computer recently crashed and had to reformat it.. lost everything

Everything was working just fine, until I had to reformat.

Now, I have no sound at all coming from my headphones and it says that the AMD HDMI Output is not plugged in.
I don't really know how to fix this..

Before reformatting, I was using these 2:
http://computerwizard.co.uk/files/wp.../vga_cable.jpg
http://www.pcforce.co.nz/bmz_cache/4...ge.281x270.jpg
But then switched to this:
http://www.konecable.com/ZenCart/images/hdmitodvi.jpg
I don't know if this can affect anything..

Here's what I have
Headphones: Astro A50
Monitor: Asus VE278Q
Graphics Card: AMD Redeon HD 7570
CPU: Intel Core i7-3770

Read other answers
RELEVANCY SCORE 52

Hello,

I would like to know if it is possible to get this working:

I have an HP G60 Notebook with an Nvidia Geforce 8200 M running with Vista basic 32 bits.
I have an HDMI output plug, an HD TV (CRT monitor) with component and s-video inputs).
I got a cable with an HDMI plug on one end and component plugs at the other end.

When I plug my computer on the monitor via this cable, I get absolutely no reaction, not even in the peripheral panel.

I get a short slight sound on my TV though, but nothing is showing and no further sound is heard.

I try to expand my display to a second screen into Windows display panel, but it does not do anything.

I try to force TV detection in NVidia but the box that I should tick for that is grey and I cannot activate this.

My drivers are up to date and I have tried loging in as Administrator under Vista (after having activated the admin account in cmd). No improvement.

Is it just not possible or does anybody have any idea?

Thanks in advance.
 

A:HDMI Output to Component?

Read other 16 answers
RELEVANCY SCORE 52

Hi

Ive been toiling away with this problem for some time, I used to be able to get sound on my TV when I ran Vista and since upgrading to Windows 7 I have had problens. I used to be able to have sound until I ran an application and the sound would go and not come back unless a restart was done.

I tied reinstalling both audio and video drivers and now I have video but no audo at all. It is picking up my TV, and it is selected as the default device but no more sound.

Im at a total loss as to what to do except buy a new laptop or desktop. Im running a:
Product Description: Samsung R70 Core 2 Duo T7100 1.8 GHz - 15.4" TFT
Dimensions (WxDxH): 35.8 cm x 26.4 cm x 3.7 cm
Weight: 2.7 kg
Localisation: United Kingdom
Platform Technology: Intel Centrino Duo
System Type: Notebook
Built-in Devices: Stereo speakers, wireless LAN aerial
Processor: Intel Core 2 Duo T7100 / 1.8 GHz ( Dual-Core )
Cache Memory: 2 MB - L2 Cache
RAM: 1 GB (installed) / 4 GB (max) - DDR2 SDRAM - 667 MHz - PC2-5300 ( 1 x 1 GB )
Card Reader: 6 in 1
Hard Drive: 120 GB - Serial ATA-150 - 5400 rpm
Optical Storage: DVD?RW (+R double layer) / DVD-RAM
Display: 15.4" TFT 1280 x 800 ( WXGA )
Graphics Controller: NVIDIA GeForce 8400M GS
Video Memory: 128 MB DDR3 SDRAM
Audio Output: Sound card
Telecom: Fax / modem - 56 Kbps
Networking: Network adapter - Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g
Wireless NIC: Intel PRO/Wireless 3945ABG
Notebook Camera: Integrated - 1.3... Read more

A:No HDMI output on TV anymore

Ok Ive managed to reinstall my Realtek drivers and are now back to square one. I have sound until I run an application, I dont know how important it is that the ones ive been testing are games that are a wee bit old e.g. aliens vs predator gold edition, american mcghees alice, bridge commander etc.

I got max payne working with patches but now it dosnt work. can anyone help me further?

Read other 7 answers
RELEVANCY SCORE 52

My HDMI display will not give me full screen. I am allowed letterbox but my actual viewing area is cut off by 2" on top and bottom only. I've gone into display properties, tried to change size and multiply displays to no avail. What can I do to get full screen? Any  assist and input is appreciated.. gwill71731

Read other answers
RELEVANCY SCORE 52

Hi

I have a HP pavillion dv6 and cannot get sound to transfer via HDMI ?

I have icons for Headphones/speakers and bluetooth handsfree but no icon for HDMI how do I restore icon as i think this may be the problem ?

Any shortcuts - advise will be appreciated on my old laptop there were function keys that controlled HDMI out put surely there must be one on this system ??

Confussed

A:no sound output on tv through hdmi ??

did you download and install the hdmi drivers ? is it listed in (device manager\ sound)?
scrooge

Read other 3 answers