Over 1 million tech questions and answers.

guess wireless network dhcp and vlan

Q: guess wireless network dhcp and vlan

So I have a small business I do IT work for. They are using Engenius WAPs for wireless which support multiple SSIDs and VLAN. DHCP is handed out by a Win2K8R2 server.

Now they want to set up a guest wireless network that only has access to internet and none of their internal resources. Problem is they need connectivity to the DHCP server. They have all dumb switches that don't support VLAN tagging.

I haven't worked much with VLANs, but I understand the concept and I'm trying to figure out if there is a way to provide what they wish (which is pretty straightfoward) without either

a. having to change the WAPs for something that have built in DHCP (that can be enabled on a per SSID basis) or
b. replace the dumb switches with switches that support VLANs

Any advice greatly appreciated. Thanks!

RELEVANCY SCORE 200
Preferred Solution: guess wireless network dhcp and vlan

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: guess wireless network dhcp and vlan

Read other 10 answers
RELEVANCY SCORE 69.6

Hello.
I have part of a network:
4 vlans configured on 1 switch(cisco 2960) which is connected to fa0/1 of a Cisco 2811router.
The server happens to be on the last of the four vlans (vlan40).
My problem is that its failing to provide ip addresses via dhcp to the PCs that are on the same vlan with it.
Thank You in advance.
 

A:Solved: DHCP Problem in VLAN.

Read other 16 answers
RELEVANCY SCORE 69.6

We are implementing a new WiFi system here at work and I am having issues creating a new VLAN on my router that goes to my onprem DHCP server. I have verified already that my new Meraki APs are working with my RADIUS server when I tag the SSID with my current VLAN that works. I have attached my router config as well as 1 of my network closets. What is missing?

I also have to work with a 3rd party because the router is managed by them. Any help would be appreciated. I believe the DHCP server is fine because I just added another IP range in the same subnet.
 

Read other answers
RELEVANCY SCORE 68.8

Dear Sir,

Pls take a look the description as below:

Cisco Equipment
2 x 3560 switchs (Core Switch)
4 x 2960 switchs

VLANs
- VLAN10 (server vlan)
- VLAN20 (User vlan)
- VLAN60 (Wireless vlan)

In the second vlan, a DHCP relay is setup on switch in order to redirect DHCP request to DHCP server that is located in VLAN10.

Question
I have 6 cisco switchs and setup 3 VLANs on it. Now, I want to add one more dhcp server IP address to the user vlan for redundant's use in case of the current dhcp server broken down, as I am not familiar with cisco command, can anyone provide the code as:

1. What is the command to show current IP helper-address?
2. What is the command to add one more DHCP server IP address to VLAN20 for redundancy?

 

Read other answers
RELEVANCY SCORE 68.8

Ok. I really need help with my project, using packet tracer. So i have to configure 3 networks interconnected via ISP. So configurations for 1 network can be modified for the other 2(so need help for 1 network).

SO.....
i have to set up a network with 6 departments(network 1):

DEP1 192.168.1.129 255.255.255.224 (VLAN 100)
DEP2 192.168.1.161 255.255.255.224 (VLAN 200)
DEP3 192.168.1.65 255.255.255.224 (VLAN 300)
DEP4 192.168.1.1 255.255.255.192 (VLAN 400)
DEP5 192.168.1.193 255.255.255.192 (VLAN 500)
DEP6 192.168.1.97 255.255.255.224 (VLAN 600)

i am using subinterface to connect them to the router via a switch.

[Q] how do i use 1 DHCP server for all the PCs in different VLAN and Sub net
[Q] how do i use 1 file server for all Departments to access for flies
[Q] how do i prevent DEP5 accessing DEP6
[Q] how do i allow DEP3 accessing DEP4

This is the packet tracer file:
www.4shared.com/file/qjXDKIhK/Packettracerfile.html

PLS HEPL ME :[
 

A:Need Help! (DHCP, SUBINTERFACE, VLAN) PACKET TRACER

Summer school?
 

Read other 2 answers
RELEVANCY SCORE 64

Dear All,

Iím having some problems with my Wireless network.
Iím struggling to get my wireless devices to connect to my wireless network. The only way I can seem to do it, is by assigning them an IP address manually Ė otherwise they get given a 169.xxx.xxx.xxx number.
Ideally, I want the devises to get the IP address automatically.

Look at the diagram to see my network.

Itís not a secure network Ė I havenít given the Wireless Router any Mac Addresses. I live in a very remote area, so Iím not bothered about security until I have it all working.

The wireless Router has 4 Earthnet Ports and 1 ĎInternetí Port.

My ADSL Router has all my Internet settings
(Both are Netgear)

My question is: How do I get my Wireless devices to collect automatic IP addresses?

Hope you can help.
Ben
 

A:Wireless Network - DHCP - Help

Read other 16 answers
RELEVANCY SCORE 63.2

Hey,


I am really suck with my network. I live in a shared house and the landlord seems to have no idea so I'm having to take control, though as you'll quickly notice I dont have much clue either.


We have a Virgin internet router downstairs, provided by thembut the wireless signal hardly passes the room, so there is a cat 5e cable through the wall, upstairs to a router that I have installed DD-WRT on, that we then intend everyone to connect to wirelessly, though some are wired.


I have put the cable from the Virgin box into the Linksys normal bit (not the one that you usually put the internet one in), but I have no idea what to do now. I've tried searching but all I can find is if I was picking up the internet wirelessly, but it its wired. A few things seem to mention DHCP though.


Any help would be amazing please. If you dont have time to write how, or point me in the right direction, then just the name of what I'm trying to do would be much appreciated, but any help would be great.


Thanks a lot,

Andy
 

A:Wireless DHCP network problems

one approach: multiple routers

I've written this several times, so I'll refer to a common post here.

Ask specific questions and I'll reply
 

Read other 1 answers
RELEVANCY SCORE 62.4

if it is a windows 7 box, try this: http://windows7themes.net/how-to-enable-dhcp-in-windows-7.html
if it is xp, try this: http://www.cs.cmu.edu/~help/networking/dhcp_info/dhcp_xp.html
if it is vista, the first one should work. now linux, is a little bit trickier, but i would have to know the version.
 

Read other answers
RELEVANCY SCORE 62

Hello, I have been experiencing some problems on my home network. I have problems with AOL, FTP and steam online games like counterstrike, team fortress 2, and day of defeat. I get these problems about 3/4 of the time, and 1/4 these programs will work.

When I sign into AOL I get a message saying "Could not connect to authentication server:
Windows socket error #10060". On FTP about half of the time I am not able to connect, and I the connection keeps timing out. On the steam games, when I open up the game dialog, I don't get the auto-retry option that is normally available. I tested these problems on other computers at my house and the same behavior occurs.
 

A:Solved: Problems on a DHCP wireless home network

Read other 10 answers
RELEVANCY SCORE 57.2

Hi,

I'm definitely not a networking expert but I now wish I was. I have to create a vlan for some external equipment to use our network and they need specific ip addresses. The switches are Netgear FSM's which do apparently support managed vlans (I think that's important). I think I can set up a vlan but cannot see what the iprange will be for them to connect to. Maybe I'm totally confused. Can anyone help or advise me where to look for help? I have the manuals from the switches but they seem to make little sense to me.
Thanks for any help.
 

A:vlan ipranges question for vlan newbie

Read other 10 answers
RELEVANCY SCORE 56.4

I currently have a network that has pretty much grown as required, and now I'd like to add some partitioning and management capability.

I've been discussing VLAN capability with zx10guy behind the scenes, and I thought I'd just jump out here and see if anyone has anything to add.

Right now, everything works and all machines and other IP devices are on a common subnet. The goal is to segregate the network so that some of the resources are protected while still allowing management and access to the whole network from a common point. Since this is my personal money, a major issue is the cost of doing this. Obviously, the switches will have to be changed to managed switches at the least.

Since I'd like some flexibility in managing the network, I'd like to do this with dynamic VLAN technology that controls access by MAC address rather than physical connection. I'm not entirely sure that this is practical given my cost constraints. I don't necessarily want all the workstations in a given location on the same VLAN.

Another goal is to allow at least one of the workstations access to the entire network to perform a management function. Again, I'm not sure exactly how I'll accomplish this across the VLAN boundary.

Another wrinkle is there are a group of NDAS disks that don't use TCP/IP for communication, and I'm not sure how the VLAN capability deals with that issue.

The switch family that seems to fit within my budget is the... Read more

A:Implement VLAN for Network

Read other 16 answers
RELEVANCY SCORE 56.4

I need to split a client's current LAN into 2 LANs so that the staff's office computers and devices are not accessible to the residents/guests. They currently have a modem+router device that gets it's public IP via DHCP, a couple of switches and a wireless access point that both staff and residents connect to (same SSID). The catch is they don't have static public IPs and the modem+router device MUST keep the current LAN IP network schema (10.1.10.0/24) or the ISP won't provide technical support.

Any ideas?
 

A:Split network without VLAN

Read other 8 answers
RELEVANCY SCORE 56

Hello, i create a network topology ( i attached picture) and i don't know what exactly IP addresses should be assigned to routers and switches + there should be five VLAN's created and just one vlan (vlan 2) must see others vlans (for management purposes) and others vlans should not see each other. So i need that: 1) What IP addresses should be on routers and switches 2) How to create a 5 vlans, that they should not see each other, but one should see all, for example where i have to put "tagged" ports where "untagged" or "not member" ports etc. thank you very much for every one for yours attention, i very need help
 

A:Need help of network topology IP addresses and vlan's

Read other 6 answers
RELEVANCY SCORE 55.6

i cant connect to the enternet or lan on my desktop. when i type in
the ipconfig /renew then it say unable to connect to the dhcp server.
can i get some help plz im not that pro in networking.
 

A:cant connect to the network "a dhcp error" not wireless and no router

You have to tell us what network you are connecting to so you can get help. No info = no help.

You could start by describing physically how your computer connects to the lan and then the internet.
 

Read other 1 answers
RELEVANCY SCORE 55.2

The is VLAN id setting in some network/LAN interface ....
how can I ping this lan/network interface in XP ..any freeware can do it ???
Please advice...
 

Read other answers
RELEVANCY SCORE 53.2

Hi,
How can I check to see if anyone is using my wireless network without me notice ?

Even I have encryption on my wireless router but just wanna to be sure.

Thanks in avdvance for your help.

Best Regards,
Silverhalo
 

A:Keep out unwanted guess from my wireless

Hi and Welcome to TSG!

Many people have concerns about this, but it is hard for your access key to be cracked, although If you want to check there should be a menu called wireless settings, and in there should be a wireless access list, where you can grant access to MAC addresses commonly called mac filtering I believe.

There is also a link called attached devices, which should list all the devices connected, including name, MAC address, Internal IP, and operating System.

Kind Regards
Hope this helps
Anthony
 

Read other 3 answers
RELEVANCY SCORE 50.8

Hi,
I am using my laptop home and work site. At work site I connect my laptop to a tagged port with 3 VLANs so I setup 3 VLANs on intel Ethernet connection adapter. They works fine. However, my home network has no VLAN setup, and I am not able to connect to
home network with same Ethernet port. Is there a way I can connect both Home and work network without deleting/Adding VLANs every time I use different network?

Thanks

Read other answers
RELEVANCY SCORE 50.4

Is there a trick to make the network icon display in the system tray in a guest acct.? The network icon displays just fine on my admin acct, but not when I'm logged into my guest acct. that my daughter uses.

Navigated to Control Panel > Personalization > Taskbar and Start Menu > etc., etc. and found the option to enable the Network icon is greyed out.

Any ideas how to correct this? Reg fix maybe?

Thank you,

Donna

A:Network icon missing in system tray on guess acct.

Hello Donna,

You might see if using the tutorial below to enable the Network icon may be able to fix this for you. It will need to be done from inside your administrator account.

Notification Area - System Icons

Hope this helps,
Shawn

Read other 4 answers
RELEVANCY SCORE 48

In my LAN, there is a domain controller which also acts as a DNS server and DHCP server.

And only thing that I need is wi-fi. I have a good router. What do I do with that?

If I set it up and disable DHCP on that, it gets an ip 192.168.0.1. But all the devices in my network have 10.0.0.x

How do I fix it?

A:I have my DHCP and DNS. I need wireless.

Enter the web setup of the router and change its local IP to something else in your range. Disable DHCP in it and point everyone to use your server instead. You may need to use the 192.168.0.1 IP once for changing this parameter, then use whatever IP you put in it.

Read other 1 answers
RELEVANCY SCORE 47.6

Ok so I'm 59 years old and just started using a computer I downloaded windows 10 update and installed my heritage family tree builder 7.0 and yesterday it wouldn't let me connect to wireless internet HELP WHAT DO I DO TO FIX MY WIRELESS
 

A:DHCP not enabled for wireless

did it work OK with windows 10 - before you install the family tree builder ?

whats the make and model of the PC

lets see an ipconfig /all

ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop.
http://www.bleepingcomputer.com/tutorials/open-an-elevated-command-prompt-in-windows-8/
Use Windows + X Keys together and choose Command Prompt (Admin) from the list.​Or Right click on the windows icon - bottom left hand side - A menu appears - choose Command Prompt (Admin)[/indent]

For windows version, XP, Vista, W7
Hold the Windows key and press R
Now type CMD
Now press Enter to open a command prompt box (A new dialogue box - black with white font, will appear o... Read more

Read other 1 answers
RELEVANCY SCORE 47.6

I opened up msconfig and looked at the manufacturer for it and it showed "Unknown"
Therefore is it a virus?

A:Wireless Pan DHCP Virus?

Bump

Read other 2 answers
RELEVANCY SCORE 47.6

EDIT: Re-posted in the correct section.
 

A:XP Wireless Problem/ DHCP

Any Ideas? Anyone?
 

Read other 2 answers
RELEVANCY SCORE 47.6

I am adding a wireless router to my network, and I don't know if I am supposed to enable or disable the wireless DHCP?

My network accesses the network through a DSL modem. Attached to the modem is my router, which acts as the network's DHCP server. There are about 50 computers connected to it, all wired.

But now I'm adding a wireless router to a part of the network. In the configuration page of the wireless router I can enable/disable it's LAN DHCP server and enable/disable it's WLAN DHCP server. I know that the LAN DHCP server should be disabled, because I already have a DHCP server on the LAN. But do I need to enable the WLAN DHCP server to get wireless to work?

I ask because, to play it safe, I disabled the wireless DHCP server. But my wireless computer, when it connects, fails to get a dynamic IP address.

Thank you for looking.
 

A:Should wireless DHCP be enabled?

Read other 13 answers
RELEVANCY SCORE 47.6

guys, i really need your help.
we have a new office, i'm the one assigned to configure our networks.

We have 50 users, divided into two groups lets say group A and B . Group A only 15users with internet connection 5 of them are using Wireless Connection, Group B 35 users must be no connection in the internet. I planning to installed a windows 2000 Adv Server so that all of them can get IP from DHCP . My router (linksis BEFW11S4) is capable for wireless connection. is connected to our 24port Switch, i planning it to have a fixed IP of 192.168.0.10 and a IPRange of 192.168.0.11-15 for DHCP Wireless Conn. and our printserver (Linksys PSUS4) is also connected to our 24ports switch).
Question :
1. How can I block from Internet connection the 35 user ?
2.My router (linksis BEFW11S4) is also DHCP server for Wireless connection, but have a fixed IP from Win200 Adv.Server. How can set the IPRAnge of windows server? since my router (linksys) is 192.168.0.10 and the range is 192.168.0.11-15?
3.Lastly I the 35 user can also connect to internet at least once a week to update thier anitvirus..how can i do this?

thanks
Guys i need your advice on this..

thank you very much..

best123
 

A:DHCP and wireless problem

If you use the server to manage the Internet connections, this should be easy.
 

Read other 2 answers
RELEVANCY SCORE 47.6

I was trying to help some friends locate a problem on the wireless system they use. They said it uses a sonicwall dhcp server, and access points to assign dynamic IP to the public.

Using ipconfig /all it lists the right DHCP server and gateway, but the incorrect DNS servers for their network. one of them is 64.86.133.51 which we googled and found mention of W32.Tidserv.G at http://www.symantec.com/security_response/writeup.jsp?docid=2009-032211-2952-99&tabid=2

So that might be the cause...
The problem now isn't simply to remove an infection, but how to locate the actual computer which most likely would be a laptop of one of the frequent public visitors.

Also what would be the best way to identify the infection quickly on a computer if we did manually check each.

 

Read other answers
RELEVANCY SCORE 47.2

Hello,

We are using  a DHCP Server,for our network we musst create new DHCP,how to add new DHCP and activate the scopes for
10.1.16.0/20(10.1.16.1-10.1.31.254)

can someone give me some tips.

Thanks a lot.

Read other answers
RELEVANCY SCORE 46.8

I've followed various things about solving my 'wireless network state = media disconnected, ip address set to 0.0.0.0.' I've done ipconfig/renew. Now it's telling me this =

(After sorting the DNS stuff)

Registration of the DNS resource records for all adapters of this computer has b
een initiated. Any errors will be reported in the Event Viewer in 15 minutes..
Windows IP Configuration

No operation can be performed on Local Area Connection while it has its media di
sconnected.
An error occurred while renewing interface Wireless Network Connection : The DHC
P client has obtained an IP address that is already in use on the network. The l
ocal interface will be disabled until the DHCP client can obtain a new address.
Windows IP Configuration

Host Name . . . . . . . . . . . . : acer-77636ef25d
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Eth
ernet NIC
Physical Address. . . . . . . . . : 00-C0-9F-F4-B0-40

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network
Connection
Physical Address. . . . . . . . . : 00-13-CE-6D-6A-87
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguratio... Read more

A:wireless media disconnected, now dhcp = bad

Are you connected to a router or a modem?
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hello,

I am about to reference a closed post. I have a slightly similar situation(However, I'm not using someone else's router) to this gentleman's problem...http://forums.techguy.org/networking/857420-connected-router-no-internet-access.html

My ISP, for lack of a better term, is "wireless internet". Not like cell phone wireless. It is broadband, that they put a radio on your roof, and beam from towers. It's normally much better than Hughes net and definitely the best option for me out in the sticks. For the past couple weeks I've had page connection errors, and much more disappointing, disconnected from Xbox live...Now this problem is intermittent. One night I may play til my fingers bleed. Next night, 2 minutes in a match, sayonara baby.

The belkin router log says:
DHCP Client: [WAN] could not find DHCP daemon to get information
DHCP Client: [WAN] Send Discover
DHCP Client: [WAN] Send Discover
DHCP Client: [WAN] Send Discover

Now from what I gather from google searches it could be my isp or router. Though, I think I've eliminated the router issue. As I've taken and plugged my internet directly into a machine and had it drop connection on a few web pages. I've also tried a different router.

So I guess what I'm asking is what is my log file telling me there and how will I know if the fools from my ISP get it right at some point? Or perhaps there are some other settings I could make that would stabilize the problem so... Read more

A:Wireless Router/DHCP error

I suspect that the problem is somewhere between your ISP and the antenna on your roof. If the antenna is directional maybe it rotated a slight bit, or blows in the wind, or a tree limb sometime blows into the line-of-sight between you and the ISP. Or maybe the ISP just has issues.

I think you should discuss this with your ISP, but also be on the lookout for patterns, such as

Is it always colder when the problems occur?
Always windier?
Raining?
Etc.
 

Read other 1 answers
RELEVANCY SCORE 46.8

I have a wired client server network, and I want to implement wireless access. Currently, the network is a mess. The network consists of a single server and multiple hubs setup around the building that then connect to the ports in each room, the typical setup. Wireless setup has been attempted by placing wireless routers throughout the building, but by no means have they been properly configured. The routers' DHCP servers have been left on and are now creating problems because they are trying to assign IP's to the wired connection. I assume by turning off the routers' DHCP server that the server should take over, but then it appears that the wireless computers can't establish an IP. The routers being used are mostly Linksys, and there are a few D-Link. Is it okay to use a normal home network router? What is the correct way to configure the router so that it merely broadcast a wireless signal and doesn't conflict with the DHCP server? Would access points make more sense? If you haven't deduced yet, I am not in charge of the network I am just the one looked to to find the problem. The person who is in charge knows very little besides what they have learned in a few classes and they are hardly ever around. I myself know only basic networking. That meaning not much more than what you learn for A+ certification and from home and small network experience. Any help or suggestions that could set me on the right track would be much appreciated.
 

A:Wireless Router DHCP Conflict

Read other 7 answers
RELEVANCY SCORE 46.8

Hi there,at SonicWALL we are getting many people complaining that their wireless clients running Vista are unable to obtain an IP address via DHCP from SonicWALL firewalls.† We are unable to reproduce the problem.† Is this a known issues. Is this fixed or will be fixed?There seems to be similar issues...http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=863519&SiteID=17 CASE 1:



WEP, no WEP... I can connect no problem, but cannot get an ip address
handed out. Vista seems to see it as an unidentified network and will
not connect to it. The same laptop running XP, no issues whatsoever. I
have fresh installed Vista a second time with no avail.

Any other non Vista machine has no issues connecting to wireless.

I can see successful authentication, and DHCP shows nothing has been issued.

FWIW, Vista indicates that it cannot identify the network...

Any suggestions? Anyone else having this issue?

I'm stumped.
I actually have since brought two other laptops online of different makes with Windows Vista with the same results.

SONICWALL - HELP?! :)
CASE 2:





I am glad to see you have the same problem. My HP nc6140 exhibits the
same thing you see. IT works fine with XP, but no joy with Vista on a
Sonicwall TZ170W.My suspicions are it's a MS problem in the IP stack. As a MS partner, I
have used Vista betas since way back - some work, some don't in this
regard. I got the OS to work in RC1 and 2 by loading the original XP
system... Read more

Read other answers
RELEVANCY SCORE 46.8

Ok- am trying to change a BT Home Hub from a wired to a wireless network connection on my girlfriend's computer and having trouble. It picks up the wireless signal, but will not automatically obtain an IP address, and when I enter an IP address manually and disable the wired connection, it no longer connects to the internet.
Here are my ipconfig logs:
FIRST connected with the ethernet cable:

Windows IP Configuration

Host Name . . . . . . . . . . . . : user-d5d1b0573d
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC
Physical Address. . . . . . . . . : 00-1B-FC-96-AC-9E
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.64
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DNS Servers . . . . . . . . . . . : 192.168.1.254
Lease Obtained. . . . . . . . . . : 17 March 2008 20:00:39
Lease Expires . . . . . . . . . . : 18 March 2008 20:00:39

NOW with the wired connection disabled and wireless enabled:

C:\Documents and Settings\Michael.USER-D5D1B0573D>ipconfig /all

Windows IP Configuratio... Read more

A:DHCP not enabled- wireless problem!

Read other 7 answers
RELEVANCY SCORE 46.8

One a few rare occasions due to interference or power outages my wireless broadband connection from my ISP will go down. As a result my Mandrake 10 firewall it will loose it's DHCP address and I will have to manually down and re-up the eth0 to get connected again.

What I would like to do is to run a cron statement that will test to see if I have an active connection to my ISP's gateway (doing like a ping request) and if not then asume that the connection has failed and have it down & re-up the eth0 port automatically. Maybe this script should then sleep for 30 seconds and re-test for an active connection, if active then exit otherwise repeat the process again.

I'm having problems figuring out a good way to test for an active connection. Does anyone know of a good script command(s) I can use to ping the gateway for the test part of this script?
 

A:Wireless DHCP renew if disconnected

I think I'd try to figure out why Mandrake Linux is failing to renew the IP address...
 

Read other 3 answers
RELEVANCY SCORE 46.8

Hi all

Got another Vista wireless networking problem.

Running Vista Business and connecting to a 3Com Officeconnect wireless router - this is set as a DHCP server with a pool of 5 addresses - MAC address filtering and WEP are enabled.
We also have another DHCP server on the same subnet (not a great idea I know but the boss's decision unfortunately)

When I connect to the 3Com, although it connects successfully, it uses the other DHCP server to assign a valid IP but doesn't assign DNS settings. Both can assign these ok, tested with XP.

I would have thought that this was the other DHCP answering before the router if it assigned the full details but it doesn't assign the DNS or gateway.
I tried using the TIDs from MS to adjust the broadcast flag to see if it was an issue with the type of router but makes no difference. Have also tried other KB articles and changed the values for the DHCP in the registry (changes back to the incorrect one once connected)

Things I've tried with no success:

Recreate the connection
Manually assigning an IP etc works ok
Disabled MAC filtering and encryption - same results.
Disabled IPv6
Changed Broadcast flag
Manually edited details in registry
Release/renew/flush ipconfig
Searched here and other places for solutions and tried most....

One more bizarre thing that happened is that this same problem was affecting 2 laptops running Vista - one of them picked up valid info from the 3Com and has stuck with it - even after the lea... Read more

Read other answers
RELEVANCY SCORE 46.8

Thanks for looking, especially for helping
Our network at work is using a D-Link DIR-825 Router. Our laptops, a Dell running XP Pro, and a MacBook Pro running OSX 10.6 (and my iPod Touch), have problems connecting to our wireless router. When I look at the IP address for the laptop or iPod the IP address is 100.100.100.102, Gateway is 101., and the DNS servers are correct, BUT our IP range allowed for DHCP for our office is 192.168.100.150-225.
If I put in a static IP, they connect fine, but DHCP doesn't give me the correct range. What am I missing???
The security is WPA, but I've tried the others and it doesn't make any difference.
Thanks again for looking!
Peace.
 

A:Wireless connection has IP outside of DHCP Range

I have no idea how your laptop is getting that address, you obviously aren't connected to your router with those addresses.

Let's work on the Windows machine, do this stack reset first.

TCP/IP stack repair options for use with Windows XP with SP2/SP3.

Start, Run, CMD to open a command prompt:

In the command prompt window that opens, type type the following commands, each followed by the Enter key:

Note: Type only the text in bold for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.
Next, do this.
Select Start > Settings > Network Connections.
Double-click the Connection icon of the connection you wish to modify to open the Connection Status window.
Click the Properties button to open the Connection Properties window.
Click to highlight Internet Protocol (TCP/IP).
Click the Properties button to open the Internet Protocol (TCP/IP) Properties window.
TCP/IP Properties window, IP Address tab
Select Obtain an IP address automatically.
Select Obtain DNS server address automatically.
Click OK to return to the Local Area Connection Properties window.
Click OK to return to the Network Connections window.


Then, do this.
Remove all the stored wireless network profiles and search for the network again. Here's How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7
Let us ... Read more

Read other 1 answers
RELEVANCY SCORE 46.8

I have had a task dumped on me and am a little out of my depth.

We have a new EFM service, which is connected to a RAD Network termination Unit; in turn this is connected to a Cisco 887VAM router, which in turn is connected to a TP-Link TL-SG1024 switch.
I can connect any computer to the switch and can connect to the internet as long as I assign each one of the 5 static IP addresses I have.
How do I get it so that I can connect more computer and have them detect a generated IP address?
I gather this is to do with DHCP at the router but I don't know where to start.

Any help?

thanks,
Matt
 

Read other answers
RELEVANCY SCORE 46.4

I'm getting really annoyed with this boot delay I'm having. Ever since I installed my linksys wireless card, at windows boot there is about a minute delay after the GUI comes up, and then finally the wireless adapter utility loads in the systray, along with antivirus and other things.
I thought maybe a new card would help, so I got a different brand and have the exact same problem. I expect windowsxp is being dumb and trying to contact a DHCP, before it even loads the necessary wireless utility for connecting wirelessly. Can anyone recommend a solution?
 

A:XP slow boot with wireless card, DHCP?

It is likely searching for a IP address . . I leave my card out of the notebook unless I am connecting to a wireless network . . starts much faster. If I need it later, I insert it and let it find a network.

wrs
 

Read other 3 answers
RELEVANCY SCORE 46.4

Guys,

It's take time to connect wireless thru ADSL DHCP... you need to release and renew.. the IPCONFIG

is there any way to connect immediately?
 

A:Solved: HELP: It's take time to connect wireless thru DHCP

With absolutely no information about the environment, it's really hard to answer.
Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter ke... Read more

Read other 3 answers
RELEVANCY SCORE 46.4

I am replacing a defective Netgear router that was working in this same configuration for years. I am replacing it with a TrendNet TEW-731BR (N300 WiFi Router). This router will be used without WAN connection at all - just purely as a wireless AP with the intent that it passes everything through the LAN port to the "parent/master/A" router which has DHCP activated and has access to the internet.

Quick summary:
Master - 192.168.1.1 (DHCP is 192.168.1.20 to 192.168.1.254)
New TrendNet - 192.168.1.9 (DHCP disabled)

My configuration is a straightforward LAN-to-LAN, same-network type of cascade:
(start disconnected from everything - just connect via wifi to the TrendNet router)
* factory reset the TrendNet router
* Go to the setup page and...
** disable DHCP
** set the static IP address to an unused IP address outside the DHCP range of the master
** change admin password
** set SSID and wifi password, change security to WPA/WPA2 AES
(now connect the TrendNet, newly configured, to the master router LAN to LAN. WAN is not used at all.)

The computer I was using for configuration now works great. Full internet access, able to ping/access anything on my intranet, etc.

Any other device hangs on access and ultimately says it couldn't get an IP address. If I set up a static IP address then I can connect with the other devices.

It's as if the TrendNet router doesn't know to hand the DHCP request over the LAN port.

I confirmed multiple times that "WiFi is... Read more

A:Cascading Routers - cannot access DHCP via wireless

is that the only other device you have connected
try a powercycle of the main router
 

Read other 2 answers
RELEVANCY SCORE 46.4

I've got a Netgear WG102 connected to a Netgear FVS114 Firewall as a DHCP server, that's then connected to a crappy BT Voyager 102 ethernet ADSL modem.

I can connect to the network fine, and it works for a while, but will then stop transfering data, and I can't get a new IP - a /renew gives me an autoconfigured address of 169.254.172.148.

Even when it doesn work, it won't do bizarre things like copy emails to my IMAP sent folder, even though it will send the emails and allow me to view new ones, even when there's no firewall turned on. This could be an internet issue, but the DHCP issue can't be.

Any ideas?
 

A:Netgear ProSafe DHCP / Wireless Issue

Read other 6 answers
RELEVANCY SCORE 46.4

I have an active directory, a DHCP server, 3 VLANs, and 2 wireless Router/AP/Repeater. I was thinking, might be the first problem, that I would put in one as an AP and one as a Repeater. The signal is there and static IP on the device works, but that is, well, it does not work for what we need it to. I tried enabling DCHP on AP but it is assigning ips to our voip phones. Really messes them up with they use get connected that way instead of the DHCP server.

So I am not sure how to set this up where a device connects to the wireless, get assigned an IP from the DHCP server and works.

I have tried several different ways, but have not hit what works.

Thanks.
Greg
 

A:Need advice with DHCP, Wireless AP, and active directory.

Read other 6 answers
RELEVANCY SCORE 46.4

Good Evening,

I'm having a problem with my laptop. I recently removed some spyware and now when i reboot, i have to manually start the wireless zero configuration & DHCP Client service manually. These are some of the things i've tried to fix the problem:

1.Made sure i didn't have another wireless device that's trying to manage my wireless connections.
2.Went into the network connection properties & under the wireless networks tab, made sure the "use windows to configure my wireless network settings
3. went into windows services and made sure DHCP Client & Wireless zero were set to start automatically (& started)

After i reboot, i have to manually start it all over again. I've been all over the net trying to find answers and suggestions & nothing seems to work. Any help would be greatly appreciated. I'm using Windows XP SP3.

Thanks,
Deac

Read other answers
RELEVANCY SCORE 46.4

I had wireless internet, I was trying to open a port, and doing some learning, I went to http://192.165.1.1 And disabeled DHCP, Not sure what it was, I enabled it, when I did The internet quit working.

I have a Linksys Model NRo41, 4 port router With 3 computers on it, 2 Xp's and a 98

I reset the router, Restart the computers, but no luck

I would really appreciate any help
 

A:had wireless internet dont work DHCP

Did you do a hard reset of the router? IE totally wipe the settings?
 

Read other 3 answers
RELEVANCY SCORE 46.4

okay, recently my old dlink wireless network adapter started spazzing out on me (it was sucking my amd4200 dry with hardware intterupts) and i had to replace it with a newer version. After many hours of aggravation b/c WZC not working like it should i used the the software that came with the cd. it worked fine and connected to my router but wont aquirre the address. i narrowed it down to be the DHCP client not starting correctly. In the services it says starting but never actually starts and all the options are greyed out so i cant tell it to restart. i need to know if anyone knows how or if i can resintall the DHCP client. without actually reinstalling all of windows. anyhelp will be apprieceted.

srry or the sp errors, this old computer (wich hasn't been used int ages) has horrible button lag and its already festering with adware
 

Read other answers
RELEVANCY SCORE 46.4

Hello!

I have been able to connect to my wireless router until yesterday it stopped working. I reset my router and that's about as far as I got....now when I try to diagnose connectivity issues it says "DHCP is not enabled for wireless connection 3". Help please!!
 

A:Wireless connection issues and DHCP not enables...

Read other 10 answers
RELEVANCY SCORE 46.4

Hi,

I am having BIG problems with intermittant DHCP address acquiring on my wireless laptop.

I see that this is a common problem with XP SP2, and have been trying to cure it, I have tried a number of soloutions to no avail and was wondering if any knew of a way to fix this problem for good.

Thanks

Dan.
 

A:Wireless networking XP SP2 DHCP bug fixed or cured?

Not sure what you mean by intermittent DHCP address.
Can you please be more specific??
 

Read other 2 answers
RELEVANCY SCORE 46.4

Network Config/Topology:
1x WinXP Pro Desktop (Gateway PC) with dial-up PCI Card ( U.S. Robotics USR5610B)
1x Win2000 Desktop ("Client" PC) connected via cat5 cable (at first crossover then patch)
1x WinXP Pro Laptop ("Client" PC) connected via wireless.

Basically I've ran a cat5 crossover cable to the computer next to me (Win2000Pro), I easily configured ICS to work on that computer, and all went well until I bought a laptop. Once I got the laptop, I wanted to, of course, have it available to access my dial-up connection (so I could be in other rooms within the house and still access the internet on the amazingly slow speeds of dial-up since it's the only thing available here). Basically after a while, I decided to switch the ICS over to my newly purchased Linksys Wireless G PCI card and setup an ad-hoc network...that worked too, but the only problem was that the "client" desktop could no longer access the internet through the Windows XP Gateway since you can't bridge ICS (at least I've never been able to get it to be a success). So, I setup AnalogX's Proxy program and configured the computer to work as such. But, that gets old after a while when you're limited to certain ports, etc...so, I went out and bought a D-Link DI-524 Wireless Router so I could have both my connections going to the same ethernet port on my computer so ICS would work. I first thought it was because of the router and my misconfiguration...but... Read more

A:Dial-Up ICS using Wireless Router with DHCP Failure

Basically, to simplify this question, does anyone know of a way to reset and fix ICS, especially the DHCP server hosted? It's not transmitting IP addresses and not picking up the address under 192.168.0.xxx. To my understanding, even though I set it up as static on my other "client" (192.168.0.3) and on this gateway (set to 192.168.0.1), it should still work and be picked up. What's causing the problem? Any help would be greatly appreciated.
 

Read other 1 answers