Over 1 million tech questions and answers.

SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Q: SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

I have a HP Pavilion DM4-3099se Laptop with a Intel Core i5 dual core processer and 6GB of RAM. On this laptop is a Synaptics touchpad and uptill now it was working fine. It recently started glitching and now when i move my finger on the touchpad, the mouse moves but it repeatedly stops and then starts moving and then moves in all different directions. I went to the Synaptics website and installed the latest drivers for the touchpad and the installation was successful but the trackpad was still the same way. My external wired mouse works fine right now though. I tried restoring my system the earliest point there was on the list and still no improvement on the touchpad. Please help. Thank you.

RELEVANCY SCORE 200
Preferred Solution: SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: SYNAPTICS TOUCHPAD NOT WORKING PROPERLY!

Thanks everyone for reading but I already fixed the problem. My computer shipped with two Operating Systems, one being windows 7 and the other being HP QuickWeb. I just booted into HP Quickweb and my trackpad was working fine and then i booted back into windows and it worked perfectly after that. I just though i would let you know and can somebody please close this topic because i dont know how to. thanks.

Read other 2 answers
RELEVANCY SCORE 74.4

Hi. My touchpad  is not working. I tried all uninstall and reinstall the driver but doesnt work. I hope you guys can help me.

A:Synaptics Touchpad not working

Hi, You could try the following. Hold down the Windows key and press R Into the Run window, type devmgmt.msc and hit enter. In Device Manager, expand Mice and other pointing devices.  Right click the Synaptics device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall. When this has completed, shutdown the notebook and then disconnect any peripherals ( ie usb mouse etc ). Unplug the AC Adapter and then remove the battery.  Hold down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter. Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter. Let windows fully load and see if you have basic touchpad functionality - if you do, download and install the Synaptics driver below. http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58572.exe When this installation has completed, restart the notebook again. Regards, DP-K

Read other 6 answers
RELEVANCY SCORE 74.4

Hi, I have a Dell Inspiron B130, yes old I know. Long story short, let a friend borrow it who prefers a regular mouse, they installed it. Now I cant get my touchpad to work AT ALL. I have gone through Dell website and downloaded driver, nothing is working. Under my Control Panel-Mouse- under hardware all I have is "HID compliant mouse" I do have a tab that has the Synaptics symbol and the word buttons, no option to enable it anywhere. If anybody can help me it would be greatly appreciated!!
 

A:Synaptics Touchpad not working at all

it maybe one of the functions keys - on Toshiba and HP I know the function Key F9 or F11 with FN key
so you hold the FN key down (on toshiba a drop down menu appears at the top of the screen ) and then press f9 or f11 or any key that has a symbol that may look correct
that will toggle between enable and disable the touch pad
 

Read other 2 answers
RELEVANCY SCORE 74.4

My Touchpad is not workingMy Touchpad is a PS/2 Port Synaptics TouchPad.Driver version is 19.0.12.0 which is a compatible driver provide by HP for this OS.My Laptop Model is HP Probook 4540sI try to upgrade the drive, I also tried every possible troubleshoot but my touchpad still refuses to work. Operating System is detecting it in Device Manager. I have posted this problem before, but I got no response from anyone.

Read other answers
RELEVANCY SCORE 74.4

My computer is a Toshiba Satellite L305 and has a Synaptics TouchPad. I use Windows Vista.

For a few weeks I had been getting messages saying "Synaptics TouchPad has stopped working, click here to solve the problem" or something similar. I didn't think anything of it because the mouse was working fine, so I just hit the "X". I'm not even sure that is a part of the problem even because it has stopped coming up.

Lately the mouse will work fine and after being on the computer for about an hour or so, the mouse will slowly stop working. I can still click and when I tap the touchpad, that will still click. I just won't be able to move the mouse. Restarting the computer does not fix it. Usually I just plug in a mouse and use it for 20-30 minutes and by then the mouse is working fine again.

Any suggestions?
 

A:Synaptics TouchPad not working.

Press FN and F7 at the same time. Post back with results.
 

Read other 3 answers
RELEVANCY SCORE 73.6

A while back my laptop's power cable was fried in a power surge. No damage seemed to have been done to my laptop. but now I fear there may have been some peripheral damage.

In any case, whether sure to the power surge or not, my touchpad is not working when the computer is plugged in. When the computer is not plugged in, the touchpad sometimes works, but it is spotty.

I have no idea how to fix this. Any help?
 

A:Synaptics TouchPad not working (not alt-f7 problem)

try re installing the driver for it.
 

Read other 1 answers
RELEVANCY SCORE 73.6

Recently my laptop was repaired because the display was not functioning correctly. When I got my laptop back I reinstalled windows completely. Using HP Support Assistant I updated all my drivers. Everything worked fine except my touchpad is not working anymore. I reinstalled the Synaptics driver(version 19.0.19.1) multiple times but my touchpad still not works. Besides that the touchpad is not listed in Windows device manager. I don't know what to do to solve this problem. Hope someone can help me! Kind regards svdsande  

Read other answers
RELEVANCY SCORE 72.8

Hi there. I've recently started having touchpad problems with my beloved HP EliteBook Folio 9470m.  The issue:The Synaptics TouchPad and its 2 buttons (located just below the touchpad) do not work at all. However, the TouchStyk and its 2 buttons (located at the top of the touchpad) do work perfectly fine. How it started:I factory reset the ultrabook using the Windows 10 menu and when it started back up, everything was cleaned, but the touchpad and its 2 buttons (located below the touchpad) didn't work anymore. External mice do work when plugged. Common solutions that didn't work for me:-The orange light at the top-left of the touchpad is not lit up-Reinstalling the official drivers for Windows 10 (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166960_1&swEnvOid=419...)-Installing different versions of drivers and even some for other brands of laptops-Resetting Windows 10 many times-Running driver scanning programs (DriversCloud, DriverScanner) Further notes:No matters which driver I install, the touchpad is always missing in the "Mouse properties" window. The last tab of the window should (if I am not mistaken) have both the Synaptics TouchStyk and TouchPad listed, but only the TouchStyk shows up. It appears as if the driver updated and might have corrupted something, or maybe it's overlapping with the old one and it didn't properly overwrite it (I'm running out of ideas...). Someone told me it might h... Read more

Read other answers
RELEVANCY SCORE 72.8

I have researched this problem quite a bit and tried several possible solutions that have worked for many users yet nothing had worked. I have tried several different drivers, tried tweaking settings with no solution in sight.

I am using W7 build 7022.

Can anyone advise?

-JKM

A:Synaptics Touchpad scroll feature not working

Scratch that! I have gotten it solved. My problem was trying the Synaptics drivers. The Alps drivers work perfectly!

Read other 6 answers
RELEVANCY SCORE 72.8

I currently have a HP pavilion tx2520ae laptop and now and again whilst im am working on it i suddenly get the message 'synaptics touchpad has stopped working with two options saying : close and check for a problem online and close', after this message appears the touchpad still works, however the scroll bar for the laptop does not, this is an inconvenience as i do alot of my school portfolios on my laptop, some of which are nearly 100 pages long and i am constantly editing it, so i need the scroll bar to save me time and effort.

When i restart the laptop however this problem is corrected, but after a while it appears again and constantly restarting the laptop every 10 minutes is just too much effort to waste on fixing a simple scroll bar.

When the message appeared, I had tried to go onto the mouse options on the control pannel and i got an error message saying 'unable to connect to the synaptics pointing device driver. if you have installed another PS/2 pointing driver please unistall the synaptics driver by clicking on the yes button. you then need to reinstall your pointing divce driver for your external device again.
Do you want to unistall the synaptics driver now?'

I have not installed any PS/2 pointing drivers but I decided to try and reinstall it again just to be sure but when I reinstalled it i had to restart my computer and when i came back on it was working fine... for a while. The message appeared again and reinstalling it was just a comp... Read more

A:synaptics touchpad suddenly stops working

Read other 7 answers
RELEVANCY SCORE 72.8

I have a new Acer Aspire 1670 laptop which has worked fine for the past few weeks. However, I turned it on this morning (it worked fine last night) to find that my touchpad no longer works.

I don't feel this is a hardware issue in the sense that the touchpad has become unplugged from the internal PS/2 port, because the touchpad works for about 3-4 seconds after I log onto Windows/when the desktop loads up. That's the only time it works, it doesn't even work at the welcome/logon screen.

After those 3-4 seconds, something obviously happens that's preventing it from working.

I thought it might be my Wacom Graphire II graphics tablet, which is plugged in via USB 2. However, my touchpad and tablet have worked fine together for the past few weeks and have never caused any problems.

I unplugged the tablet, and uninstalled the tablet and touchpad drivers. I then rebooted, and - navigating around with the keyboard - reinstalled the touchpad drivers and rebooted. It still won't work.

Any ideas?
 

A:Synaptics touchpad suddenly stopped working

Two things:

1. Does the touchpad have an indicator light that shows you when it is activated? The one on my HP does.

2. Is there an On/Off button above the touchpad...there is on my HP. Did you accidently turn it OFF
 

Read other 3 answers
RELEVANCY SCORE 72.8

can u plz s solve it out.mouse pad is working properly but when i want to copy something  copy list is coming nd go way.. i can't click on the copy... the option is coming nd go way.. i cn not prfrom some action. wil typing on keyword also i hve a problm..continue typing nd it stop agin i hve to click on that page then its workin..   

A:Synaptics TouchPad 64-bit Enhancements has stopped working

Hey @Preetish,  Welcome to the HP Support Forum. I hope you enjoy your experience here.  I understand you've lost some right-click menu options and are encountering keyboard functionality issues. I would like to help you with this.  Could you please reply with your PC product number? If you're not sure how to find that information, please click here for instructions: http://ow.ly/Sblkw  Thanks, 

Read other 1 answers
RELEVANCY SCORE 72.8

I turned on my 6 months old Acer Aspire One as usual and realised that something was wrong with my mouse. The left button simply doesn't work. Neither does tapping the touchpad. Nothing happens no matter how many times I push or tap. I can move the cursor around just fine and the right mousebutton still works. I can also plug in a USB mouse and use that instead.
I have checked the mouse properties. Under the tab "Hardware" the mouse is listed "Synaptics PS/2 Port TouchPad", and the unit status says it works correctly. I also checked the preferences, and both tapping and buttons are activated and set to normal.
I have tried restarting, removing the battery and Fn-F7 without any luck.
I have also tried switching preferences to left-handed - that gave a funny result: Both the right button and tapping the touchpad functioned like a right-click except now they could also for instance close a window and open the start-menu. The left-button still didn't have any function what so ever.
Hope someone can help me.
 

A:left button not working on synaptics touchpad

I would suggest replacing the touchpad and buttons.
 

Read other 1 answers
RELEVANCY SCORE 72.8

My first post! Hopefully NOT one of many.

I recently got a secondhand HP NX9105 laptop. I reformatted the hard drive and installed Windows XP (SP3).

All worked fine, except the touchpad isn’t working.

I could not see a driver for it so I went onto HP support website and downloaded the Synaptics driver (sp35444). The install got interrupted with the message "This Synaptics pointing device installation package does not support one or more of your pointing devices and will not be installed…".

I then tried the Alps driver (sp25796) and that installed (is visible in the Add/Remove Programs), but the touchpad still didn't work and it doesn't appear in either the Device Manager or in Control Panel->Mouse->Hardware tab.

Next I tried to install another version of the Synaptics driver (sp27681). This one installed so I then rebooted the laptop.

The touchpad still doesn't work, but now I have the Synaptics Device Settings tab in my Mouse settings. The problem is that all the buttons are grayed out and no devices are listed.

Is it possible that this is a hardware fault or is there anything else I need to download?

I'm really stuck now, please help...
 

A:HP NX9105 Laptop Synaptics Touchpad not working at all

well heres your drivers....

You touch pad should automatically just "work" with no special drivers...

Mabe it broke...
 

Read other 1 answers
RELEVANCY SCORE 72.8

the left click on the synaptic touchpad is not working.  I can move the pointer with touchpad, but when I press the left  click button, nothing happen. I  try upgrading the synaptic tocuhpad driver and still the left click does not work. I reinstall the old version and I still have teh same issue. When I use an external pointer device the left click on teh external device work fine. Does anyone out there have answer to to this issue?

Read other answers
RELEVANCY SCORE 72.8

My Qosmio G50-133 lost suddently it's touchpad, it's not working anymore, the mouse panel control shows the synaptics tab without any information in it.
I uninstalled it, restarted my windows 7 with no luck and I just can't find any driver for it on toshiba site or anywhere....

Does sosmeone have a clue ??

A:Synaptics touchpad stopped working on Qosmio G50-133

Solved !

Went to synaptics, downloaded their latest driver for my OS, installed it.

Bye.

Read other 2 answers
RELEVANCY SCORE 72.8

I'm on a Compaq Presario CQ50 laptop with Windows XP, and the other day when I hard-shutdown the computer and restarted, it booted up with a loud, long beep until I forced it to shut down again. When I restarted, the touchpad no longer functioned, and I've been using a USB mouse since. Also, occasionally the keyboard doesn't function after coming back from hibernating, though a restart fixes this.

I tried uninstalling and reinstalling the Synaptics driver, but although the driver appears to have been installed (the Program Files are present, as is the Add/Remove entry), the Synaptics TouchPad is not listed under Device Manager nor is it listed under Device Settings in the Mouse properties under Control Panel. Why isn't the driver fully reinstalling back again?

I've read on other similar problems to try checking to see if power is being sent to these devices under the BIOS, but apparently Compaqs are notorious for being difficult to get into the BIOS, so I haven't had luck doing that yet. System restore to a day prior to the event didn't help. No function keys disable the touchpad, and the touchpad light is white, not red (meaning it's "on"). I'm still under warranty, but if I can fix this without having to wait for it to ship back and forth, that'd be much more preferable.

Any advice at all would be much appreciated! Thanks!
 

A:Solved: Synaptics Touchpad No Longer Working?

Read other 9 answers
RELEVANCY SCORE 72

Hello,

I want to thank in advance for any responses I get to this thread.

I have a Gateway laptop model MT6840. It has a Synaptics touchpad. A couple of days ago, the touchpad stopped working completely. I took my laptop out of sleep mode, and the icon for the touchpad in the system tray was simply gone. I checked Control Panel: Mouse: Device Settings for the Synaptic touchpad, but all options are merely grayed out, and the device does not register on the computer anymore.

I believe I have tried almost everything. I first tried rebooting. I then tried disconnecting my external mouse and then rebooting. Then I tried uninstalling and reinstalling the driver from the Gateway website. I looked on Google, but found nothing of use. Alas, none of these things have worked.

This is a bit frustrating because, although I do have an external mouse, it is much more convenient not to have to bring the external mouse around when I transport it. And since I'm a college student, I need to get around with my laptop quite often.

I don't believe it is anything related to the hardware because it stopped working when the software (apparently) magically disappeared. I would really like to solve this problem.

If anyone knows of anything, please let me know. If there is some detail I should mention that would help, please also let me know.

Thanks,
Minus
 

A:Gateway MT6840: Synaptics Touchpad stopped working

Well, I decided to reboot again and go into the BIOS. I did, changing absolutely nothing (even choosing the "discard changes" exit option), logged onto Windows, and the problem was solved.

I have no idea how that worked, but it did.

I can't find a delete thread option, so if an admin is reading this, go ahead and just delete this.
 

Read other 1 answers
RELEVANCY SCORE 72

Hello Team,I'm facing a strange technical issue with my Laptop TouchPad scroller on HP ProBook 4520S.TouchPad scroll works fine with almost every application except Windows native Apps i.e. Start Menu, Stores, NEWS etc.Its working absolutely with Windows Explorer, Google Chrome, Excel, Word, Power Point but no luck with Windows Native Apps. I have tried almost every thing i.e. Registry Key changes, Changing settings under Devices> Mouse & TouchPad but no luck at all on this. Also tried updating latest driver for Synaptics TouchPad.If any of you are aware of this issue pls advise the fix for it? Detail are as per below:OS: Windows 10 Pro x64TouchPad: Synaptics ClickPad V7.4PS: Earlier it was working fine with Windows 8.1 Pro.Thanks,PS

Read other answers
RELEVANCY SCORE 72

Hi, I own a hp pavillion dv6 7050ca notebook and the touchpad is working but the disable/enable function on the top left corner, gestures, etc is not... The only way to get the functions working is to go to the mouse settings and right when it pops up, the functions work...but right after I shutdown,restart,hibernate, the functions stop working again..my brother has the exact same laptop and doesn't have this problem..we have the same device version(snynaptics pointing device driver version 8.1) and I also checked my msconfig to make sure synaptics is enabled on both startup and services..pls help me! Keep in mind the touchpad still works..just not the gestures and disable/enable square on top left corner of touchpad. And I also tried to uninstall and reinstall the driver but still no luck..any help will be very much appreciated!

A:Hp Pavillion dv6 7050ca synaptics touchpad functions not working?

Hello and welcome to 7Forums!
I would reccomend for you to try This to repair your drivers and such.

Post back results.

Read other 4 answers
RELEVANCY SCORE 70

I am running Windows 10 on an Acer and recently downloaded and installed the update for the Synaptic touchpad (January 17, 2017).  After rebooting my laptop, I can use the touch pad to move the cursor when logging in, but once the system as loaded,
I cannot move the cursor using the touch pad.  I can left-click and right-click, and shrink and expand on the touch pad, but have no control over the cursor.  I currently have a mouse attached to the computer in order to move the cursor.
When I click on the link for more information about the update, there currently is no information.  Quite frustrating.
Please advise as how to resolve this issue.
Thank you.

Read other answers
RELEVANCY SCORE 66

Hi i have hp i7 4712 laptop.but its touch pad is not working properly.Because when i using it some its stop for few minute and then it start working.

Read other answers
RELEVANCY SCORE 66

No idea if this is hardware or software, but I'm trying this first.

I have an Inspiron 1525 laptop running Vista. My touchpad stopped working for some random reason a couple days ago except for the buttons. It might have started working again a while ago, but I just noticed 2 hours or so again that it was working, except for 2 things: I can't do that... uhhh... dunno what it's called, where you click the two buttons together and it does what clicking the mouse wheel on a normal mouse would do... and I can't scroll. The thing on my taskbar that tells me where my finger is on the touchpad has disappeared, as well.
 

A:Touchpad not working properly

Touchpads are usually proprietary pieces of hardware that have drivers supplied by the manufacturers. Check your device manager and settings in Control Panel (it may be under the Mouse settings) to be sure everything is all right there.

You might also go to the manufacturer's web site to check on a driver, and maybe an update to it. You could always reinstall it, anyway.
 

Read other 2 answers
RELEVANCY SCORE 66

i am using hp ay008tx and have installed latest driver as recomended on hp website of SYNAPTIC TOUCHPADV1.3.. sometimes i have to click twice ot thrice to get one click.

Read other answers
RELEVANCY SCORE 66

My touchpad is not working properly.I can drag my cursor using it but am unable to hold it or tap it to select something which causing several inconvenience.

Read other answers
RELEVANCY SCORE 66

OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out, or is there something I can do to stop this?

A:Touchpad not working properly

What state is your laptop on when the touchpad issue occurred? This happens on my fujitsu laptop when charger is plugged in. After a quick googling, found out that I just had to put the "brick" part of the charger to a good distance away from my laptop. Worked wonders! Issue usually happens with replacement chargers (due to voltage or ampere incompatibility).

Not sure though if this was your case.

Read other 0 answers
RELEVANCY SCORE 66

My hp touchpad isn't working properly. It stops after sometime and windows 8.1 is working really slow. Kindly fix this issue as soon as possible. I shall be highly grateful to you.

Read other answers
RELEVANCY SCORE 65.2

Hi I have a Samsung RV510 laptop and I have a problem with the elan touchpad. It can scroll up and down but I when I click or tap on anything it doesn't do anything. I am using a USB plug in mouse but I am working on an university assignment and I need the USB portal to save my work on an USB key. Before Christmas I had the same problem and I went into the tech support in uni and he said that I had set the left click button to right click function or something like that and he went into control panel and mouse to resolve the problem. He fixed it by doing something in Mouse under Control Panel but I just can't remember what and by the way I have the setting where the elan touchpad is disabled when an USB plug in mouse is inserted. I really need help today if you can ! I have tried to adjust the settings of the touchpad in Mouse in Control Panel but even switching the buttons does not do anything to solve the problem. Sometimes when I start the laptop the touchpad works fine but an indication that is going wrong is when I am scrolling the screen with the touchpad the pop up that appears on screen when one right click appears by itself and keeps appearing whenever on the screen I move the touchpad mouse. After that the tap to click as well as left and right click buttons fail to work at all and I do not know if this is a software problem or is it a hardware problem as I said I encountered this problem already and now it's returned. Thanks
 

Read other answers
RELEVANCY SCORE 65.2

1. when i start my laptop, touchpad works fine but after a while it starts missbehaving. right click n left click work fine but cursor is out of control.i have checked if its driver is not updated but it is updated.i uninstalled its driver n installed it back but even then it is not working. i read somehwere if its touch screen is turned off then touchpad works fine but even if i turn touch screen off it does not work.2.i dont know about other function keys but i use function keys for brightness and volume all the time. i dont know if it was last window update or what else went wrong that these function keys are not helping anymore. These keys still make a pop up sound which means keyboard buttons are working fine.please help.

Read other answers
RELEVANCY SCORE 65.2

My scrolling up and down option of touch pad is not working what should I do...?
 

A:My laptop touchpad is not working properly

Are you referring to the the right side scroll bars on laptop touch pads that allow you to scroll up and down pages?

Try updating the driver for your touchpad and see if that helps.
 

Read other 1 answers
RELEVANCY SCORE 65.2

Brand new chromebook and the touchpad lags, or does't respond correctly (scrolling when it shouldn't, clicking the wrong area, etc.)  Is there somethig I can do to fix this?

A:chromebook CB5-311 touchpad not working properly

Factory resethttps://acer.custhelp.com/app/answers/detail/a_id/11188/~/how-do-i-recover-my-acer-chromebook%3F Replace the Chrome O/S recovery drivehttps://acer--uk.custhelp.com/app/answers/detail/a_id/27636/~/how-to-create-recovery-media-for-a-chr...

Read other 2 answers
RELEVANCY SCORE 65.2

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.
I tried to uninstall and reinstall the driver but it seems to not working.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-80 - Elan touchpad not working properly after ...

Good day and welcome to the community.Please provide more information about your system model, otherwise it may be difficult for the community to assist you. We will also be able to confirm that your post is in the proper forum.Regards.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other 2 answers
RELEVANCY SCORE 65.2

my laptop keyboard not typing but I know its working cause when i hit CAPS LOCK the indicator light will switch on and when i hit letter N network will show up... touchpad also not working properly... when i double click my file document, the property document will show up not the document itself. when i hit right click nothings happen or nothing showing up... but when i accidentally hit ESC right click button work perfectly but left click button still doesnt work.... and every time I restart my computer I always hit ESC just so the right click button will work.. I already refresh/reset/reformat my computer... nothings changeI even Upgraded the Bios.... still nothings changeI Uninstall/install alps touchpad driver... still notings change  Please help me... I dont Know what to do anymore 

Read other answers
RELEVANCY SCORE 65.2

I bought a Lenovo G50-80 (intel(R) Core i3-5005U, 2GHz) a few months ago. A week after buying, I noticed touchpad not working properly while charger plugged in, also it was not working while my printer?s USB cable connected. Touchpad button and finger tap working fine but, cursor hanging or moves very slow. When I unplugged the charger and printer cable touchpad working fine. But, it was not working anymore (it is also not working properly when the charger and printer?s USB cable unplugged). Usb mouse working perfect.My Laptop have installed windows 7 64bit operating system. I tried to reinstall windows 7 64bit ultimate and professional os (Not other like windows 8 or 10), I updated a latest bios and touchpad driver from Lenovo and synaptics website, But I am getting same problem.

A:Lenovo G50-80 touchpad not working properly when t...

Hi there, Nmparmar          -
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
Can you try to:
Make sure you use the original 65W 20V/3.25A or 90W 20V4.5A AC adapter that came with the unit.
 
Plug the AC adapter in another wall outlet in your house (preferrably another side of the house) - if this works, the original wall outlet that you used before when you got the issue may not be properly grounded.
 
Perform a power drain by:a turning the PC OFF. Remove the battery & AC adapter then hold the power button for 30secs. When done, reinsert the AC adapter and battery then boot into the BIOS by pressing F2. When inside the BIOS, press F9 to reset default settings and press F10 to save and exit.
 
Update the Touchpad Driver below:
 
Synaptics Touchpad Driver      
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution

Read other 3 answers
RELEVANCY SCORE 65.2

Hi, I have a dell laptop dell latitude e6410 running on Windows 7 32bit and mouse touchpad is irattic and not working properly, can anyone give me the right driver for that?
Thanks

A:Mouse touchpad not working properly

www.dell.com/.../driversdetails

Read other 2 answers
RELEVANCY SCORE 65.2

My laptop touchpad is not working properly; that is I cannot scroll properly and also have problems with the sensitivity of touch. I downloaded and installed the Synaptic touchpad driver but it is still not functioning very well. Please can someone help me with a solution.
The name of my Laptop is; Compac Presario CQ50-115NR Notebook PC
Thank you.
 

A:My laptop touchpad is not working properly

Go to Start -> control panel -> Hardware and Sound.

Somewhere in there you should find adjustments for the sensitivity.

If this does not work please state your operating system for further help and try it with a USB mouse.
 

Read other 6 answers
RELEVANCY SCORE 65.2

Hello hi im lili b any my toupad isnt working right the dang strolling up or down wont work and I cant fix it I have an hp pavilion dv4 1435dx could someone help mi find the orrect driver that could fix it
 

A:Laptop touchpad is not working properly

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3979336&lc=en&cc=us&dlc=en&lang=en&cc=us

You should find the drivers you need here. Click on next By the windows 7 64 bit box.
 

Read other 2 answers
RELEVANCY SCORE 64.4

I upgraded windows 10 about 2 days ago and from that my elan touchpad starts to not working after some minutes of usage, it always detects an unexisting tap.I tried to uninstall and reinstall the driver but it seems to not working.

Read other answers
RELEVANCY SCORE 64.4

Hi, I have a strange problem with my inspiron Inspiron 15 (N5050). When I plugged in the AC charger, the touchpad / mouse does not work properly. Sometimes it moves and sometimes not eventhough I have moved and touched the touchpad. When I disconnect the AC charger, the touchpad works perfectly fine. Can anyone give me advise on this? thanks in advance

A:My mouse/touchpad is not working properly while charging

Hi suneel_zee.
Welcome to the Community,
Have you tried different power outlets? Does this happen in different locations(even outside you house/work)?
I would suggest you to release flea power.To release flea power disconnect AC adapter,remove battery,disconnect all external peripherals(USB devices),press and hold power button for 30 seconds.
Reconnect the battery and AC adapter.Check how touchpad responds with AC Adapter connected.
If the issue persists try a different AC adapter(may be borrow from some one who uses same watt Dell AC adapter).
Let me know how it goes.
Thank You

Read other 11 answers
RELEVANCY SCORE 64.4

I just reformatted the HDD on my girlfriends laptop and now the touchpad mouse is not working properly. The scroll wheel doesn't work and when scrolling down on a web page with the keyboard it goes step by step. Are their any settings that I need tochange to make it work right?
 

A:Laptop touchpad mouse is not working properly

Some touchpads require specific drivers installed. Did you install these from the manufacturer? This is the integrated one on the laptop not add-in devices?
 

Read other 3 answers
RELEVANCY SCORE 64.4

I love my Satellite T110-107 but there are issues with the TouchPad.

1). The mouse cursor doesn't move at times. With this one I can get it to move by taking both hands away from the laptop for a moment.
2). The mouse cursor suddenly 'shoots' off to the right hand of the screen.

I've tried changing the touchpad sensitivity to both the minimum and the maximum levels, i've adjusted the 'Palm' sensitivity but nothing seems to help other than by making the sensitivity low which helps a little.

I've also noticed that when the laptop is on my lap, the problem is worse than if it's on a table.

I think that it's a problem with a build up of static on the case.

Any other ideas?.

A:Satellite T110-107 - Touchpad not working properly

Hi buddy,

I use Satellite T110 for months now and really and no problem. Everything runs great and I don?t have any problems. It?s really great notebook!!!

So it must be something wrong with yours or installation.
First of all I would recommend updating the touchpad driver. You can download it on the Toshiba website:
http://eu.computers.toshiba-europe.com

After this you should test it again. Check also the touchpad settings again. There are a lot of settings to improve touchpad.

Read other 2 answers
RELEVANCY SCORE 63.6

Hi,

On windows 7 the touchad isn't working properly meaning that I can't scroll on pages by sliding my finger at the edges of the touchpad. It worked perfectly witn Vista and now it's not. I have 64bit version.

I searched for new drivers but there aren't any. How should I resolve this?

Thanks,

A:Portege M800 - Touchpad not working properly on Windows 7

What Model do you have exactly?

PPMxxx-xxxxxx?

Read other 5 answers
RELEVANCY SCORE 63.6

Hi, I got my HP ENVY 15t-q100 CTO Notebook PC in September, 2014. It has Windows 8.1, 64-bit. For the first few weeks of use, I did not have any issues. Then, I started having more occurences of cursor/touchpad issues to the point where it happens every hour of use (not an external mouse issue): Jumps around on screen (a few millimeters to inches). Move incrementally on its own without me anywhere near the laptop (generally spazzes to the left). Not allow scrolling/normal touchpad functions when issues are occuring. Functions as if I am holding down the click button while I try to move it - most frustrating part when I am doing important work. Randomly click stuff as I attempt to move it.  Here is what I have tried to do to fix it and has not worked:Roll back driver (didn't work). Update driver (no updates available). Reset device (works for a minute or so). Restart (I do this daily anyway). Reduce cursor speed and other mouse options suggested online.   I have seen similar issues for the HP Envy 17 and other notebooks, but no actual fixes have been proposed. Please help me with this issue. 

A:Cursor jumping, sporadic, and touchpad not working properly ...

Hi Please find the link given below might help you to fix your issue. In case you have already tried the steps let me know. Link Try updating the Bios then update the update the driver. Try performing a system restore to the date where unit was working fine.

Read other 9 answers
RELEVANCY SCORE 63.6

Hi. I'm a first-time user and happy to have found your website!

My operating system is Windows 7. I am using a wireless Logitech Mouse (uses USB hardware). I have had this laptop for 5+ years.

PROBLEMS:
1. The touchpad will not ?turn off.? Under "Mouse" on the Control Panel, functions for the Dell Touchpad should allow me to simply turn the touchpad on and off. Regardless whether it is in the on or off position, it is still on.
2. Even when I don?t touch the touchpad, the cursor skips around the screen, highlights text and deletes text. Typed text re-locates within earlier typed text.
3. There is an on/off light at the top of the touchpad that indicates the touchpad is on/off. This is not working.
4. Also this panel item allows me to manage sensitivity, buttons, gestures & edge scroll & zoom. I can work these, but the Edge Scroll & Zoom buttons do not see to change the settings.

WHAT I HAVE DONE TO ATTEMPT RESOLUTION:
1. I have checked the drivers for both the touchpad and mouse and I get messages that they are each up to date
2. Because the touchpad will not turn off, I have tried to manage the buttons to turn down the sensitivity, to minimize movement of text. This does not help.
3. Turning on ?Disable Touchpad & Point Stick when USB Mouse present? does not disable the touchpad.
 

Read other answers
RELEVANCY SCORE 63.6

The hinges on my computer were askew, so I sent my computer to the service center. After 3 weeks, they returned my computer to me and told me that the top "chassi" and the bottom cover have been replaced. Not sure what they meant, because the people that fixed my computer were not there at the store to explain it to me, but I'm assuming that it's the top and bottom cover of my computer. I was told that the hardware and the software are still intact, because they didn't have to alter anything during the reparation of my computer. The first thing I noticed when I started using my computer again is that it is very slow. It makes that "thinking" clicking sound all the time, even when I'm not using the computer (No programs/files open, long after the computer's startup). The system was VERY slow. It was laggy and irresponsive most of the time. I deleted multiple useless files and download new antivirus software to make sure that my computer is clean. The computer is no longer laggy, but the "thinking" sound is still there (it's there all the time).  The second thing I noticed is how my touchpad didn't respond to my click. I can move the cursor around perfectly fine, but I cannot click. Neither with a tap on the touchpad nor with an actual click on the touchpad. The touchpad registers my touch, but not my click :/ Does this have anything to do with the aforementioned hardware/software/harddrive/drivers? (My computer terminology is terrible, sorry). Thank you.&nb... Read more

Read other answers