Over 1 million tech questions and answers.

Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

Q: Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

for the last few weeks I have been receiving a whole bunch of BSOD errors. I have tried absolutely everything I possibly can to resolve this issue. I ran a memtest86 for 8-9 hours with 4 passes and no errors, I have completely removed my HDD's and replaced with a new SSD drive and I have also updated my BIOS but to no avail I seem to be still suffering from BSOD..

Any help would be massively appreciated.

PS: x0000000a and 0x0000010e BSOD were received after I had updated my BIOS.

here is my DM collected log with my DMP files:

Preferred Solution: Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

This is either graphics driver issues or GPU failure.

I recommend ruling out the possibility of a failing graphics card first.
Run Furmark by following these instructions. (Run for around 30 minutes.)

Video Card - Stress Test with Furmark

fffff880`0837c738 fffff880`042fa22f : 00000000`0000010e 00000000`0000001f fffff8a0`0a4a7dd0 00000000`00000000 : nt!KeBugCheckEx
fffff880`0837c740 fffff880`04a211d0 : fffff8a0`0a4a7dd0 fffff8a0`0a4a7dd0 00000000`001f8ed3 00000000`00000000 : watchdog!WdLogEvent5+0x11b
fffff880`0837c790 fffff880`04a1e9d3 : 00000000`00000000 fffffa80`1508b050 00000000`00000c3a fffffa80`154350f8 : dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForSubmission+0x148
fffff880`0837c7d0 fffff880`04a387d9 : 00000000`00000000 fffff8a0`090f6120 fffffa80`00000000 fffffa80`14fe7660 : dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+0xe1b
fffff880`0837c9a0 fffff880`04a38514 : fffff800`00b96080 fffff880`04a37f00 fffffa80`00000000 fffffa80`00000000 : dxgmms1!VidSchiSubmitRenderCommand+0x241
fffff880`0837cb90 fffff880`04a38012 : 00000000`00000000 fffffa80`152161a0 00000000`00000080 fffffa80`132ec410 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`0837cbc0 fffff800`033702ea : 00000000`01c9340d fffffa80`12e6ab50 fffffa80`0d318990 fffffa80`12e6ab50 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`0837cc00 fffff800`030c48e6 : fffff800`0324ee80 fffffa80`12e6ab50 fffff800`0325ccc0 fffff880`01b7038f : nt!PspSystemThreadStartup+0x5a
fffff880`0837cc40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
It sounds like a GPU failure as your other dump file contains memory corruption issues.

BugCheck A, {8, 2, 0, fffff8000318a76b}

Probably caused by : memory_corruption ( nt!MiStoreSetEvictPageFile+b )

Followup: MachineOwner
However, we should also rule out RAM.
Please run Memtest86 for at least 8 passes.

Read other 9 answers

Hi guys, I have been experiencing BSOD crashes for a few months now. I wasn't really sure what to do but now that they have become more frequent (normally 1-3 a day) I have come to you guys for help. I'm not completely computer illiterate and I've followed the appropriate error posting instructions. Any help is hugely appreciated, thank you.

Windows 7 Home Premium
- x64
- Windows 7 Home premium first and only OS on PC.
- Have owned the computer for about a year and a half.
- I haven't re-installed the OS at any point.

Thanks again, Nambarc.

A:BSOD generally at startup, errors: 0x0000000a and 0x0000003b.

> Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST


Microsoft Security Essentials - Free Antivirus for Windows

> These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.


*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+

Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resor... Read more

Read other 6 answers

Could really use some help in determining what's amiss. The crashes seem to randomly occur, at least nothing that I can pin point. I also tend to think this may be cause by both drivers and hardware as on at least two occasions the computer would not restart. When powered on, it failed post and went into a series of rapid beeps. I don't believe heat is an issue but it has taken awhile before I'm able to get it to reboot on those two occasions. I've read the posting rules and I believe all of the system info is listed on my profile and hopefully I've uploaded the dump file. but please let me know if I've missed something or there is additional information required.
Thanks in advance!

A:multiple random BSOD's ERRORs 0x0000001e and 0X0000003b

Hi darenot.

There is a high possibility that the BSODs are caused by NVIDIA nForce Serial ATA Controller. The storage controller element of nvidia chipset; specially RAID. c:\windows\system32\drivers\nvstor64.sys

fffff880`02f1ba40 fffff800`02ad15d1 CLASSPNP!TransferPktComplete+0x1ce
fffff880`02f1bac0 fffff880`0110d6c8 nt!IopfCompleteRequest+0x341
fffff880`02f1bbb0 fffff880`0110d443 storport!RaidUnitCompleteRequest+0x208
fffff880`02f1bc90 fffff800`02ad830c storport!RaidpAdapterDpcRoutine+0x53

fffff880`02f1b978 fffff880`0117500fUnable to load image \SystemRoot\system32\DRIVERS\nvstor64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvstor64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor64.sys
Which is too old.

Image name: nvstor64.sys
Timestamp: Tue Jun 23 03:53:37 2009 (4A400469)
It is almost impossible to find updates to nvidia chipset nowadays; specially for such an old HP.

BiosVersion = 5.27
BiosReleaseDate = 06/10/2008
SystemManufacturer = Hewlett-Packard
SystemProductName = D5468AT-ABA ALONPAV
So I would suggest you to get rid of the nvidia elements and use windows system native elements.

Boot into the BIOS. Disable RAID. Then perform a Clean Reinstall - Factory OEM Windows 7

If you follow the guide step by step, it will lead to a perfect windows install which is driver complete itself. No need to install any drivers from nvidia o... Read more

Read other 1 answers


I've recently started seeing BSODs with my gaming rig. It first happened while playing Star Wars: The Old Republic, but after that would occur during post or shortly after.

I had not added any new hardware recently, or updated any drivers. Rig had been stable since I built it 18 months ago. No overclocking.

I checked my drivers, and my graphics driver is up to date. I updated the drivers for some of my peripherals, which did not seem to help. Next I tried updating the chipset, but after that it seemed worse. I could not get past the login screen.

I then flashed my bios with the latest stable version. That got past me login (posting this on my comp).

I followed the steps to collect the previous crashes and was hoping you could look through them and identify anything I could fix. zip attached.

Thanks for your time.


A:BSOD, multiple errors 0x0000003b, 0x0000007e, 0x0000007f

Hi mattmcbride welcome to SevenForums .

Lets run a memory test . Take a look at the link below

RAM - Test with Memtest86+

If you get any errors during the test .

Take a look at Part 3: If You Have Errors: from the tutorial above .

Read other 5 answers

My computer has crashed for some time now and the things I have been doing so far is
Swap out my GTX 660 for my old GTX 460. No improvements.
Swap out my ram memory with a friend 8GB.No improvements.
Installed a clean version of Windows 10. It still crashes.
Been using Verifier and it has crashed about 5 times from going from login into desktop, in system logs and Minecraft.
No mini dump file has been created with Verifier on.
The last crash as I do got a mini dump from was like 4-5 minutes into a new Minecraft world.
Thanks in advance

Read other answers

I started to get BSOD?s about a month ago from time to time. I don?t know what to do.

I have checked my hard disk and memory for errors. Nothing found. BSOD?s come while I?m doing nothing: Computer is on and firefox is maybe open but I am not using computer. Does anybody know what should I do?
Thanks for your help.

A:BSOD while doing nothing, error 0x0000003b/0x0000000a

Hello, vejolkk and welcome to the forums. I will try to help you with this. This is what one dump file said, the other one gave little info.

BugCheck 3B, {c0000005, fffff80002e518e3, fffff88008d9ad50, 0}
Probably caused by : memory_corruption ( nt!MmCleanProcessAddressSpace+f7 )
Followup: MachineOwner
Please Run Memtest86+

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are ... Read more

Read other 5 answers

Hi, I recently upgraded my pc and I have some probleme with the new one.
I got the first BSOD on 18th of december: 0x0000000a

After this, I updated the VGA driver (from AMD's page) and I did not have a problem for 3 days.
Today I got this: 0x0000003b
I have the latest drivers and updates installed. (W7 Ultimate x64 installed on 5th of dec.)
What else can I do?

A:BSOD random 0x0000000a, 0x0000003b


Please post all files following:

Read other 9 answers

Dear experts,

after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I installed/ran no other software or drivers. Windows update shows me that Windows is updated. I have currently only one bar of 8GB RAM installed; I have a 4-bar 16GB and a 2-bar 16GB kit available that ran fine in an identical PC. The QVL from Asus is from 2011 and outdated; the recommended RAM is no longer commercially available.

Do I need a new processor, mainboard or RAM? A new PC? I sincerely hope not the latter!

I have attached the output from the SF Diagnostic Tool as required. What should I proceed with?

Thanks in advance for any insights!

A:BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

I downloaded and installed one additional software, IntelProcessorDiagnosticTool and ran it. Result: Another old chap reared its ugly head - the BSOD 0x00000124 where the BSOD display freezes and thus no minidump is being written - I have to push the reset-button each time this particular BSOD occurs.

I mean, being a useless user, I can't tell shit from shinola as far as PCs are concerned, but does this indicate a hardware fault? Such as mainboard, memory or processor?

How can I pinpoint what it is, so at least I know what, in the worst case, I have to buy anew?

Read other 9 answers

BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007F. So far.

I dont know what the heck is going on, but it seems to crash mostly when I am playing Battlefireld 3. I ran a diagnostics check and nothing came from it. I also did a stress test on my Video card (Nvidia GeForce 560 Ti) and nothing came from that either.

My system is an Alienware Aurora
Mother board is Alienware w Intel Core i7 920

A:BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers

I'm new to this whole crash analyzing thing so I'm sorry if a messed something up.

I included the .zip in the attachments.

Let me know if you need anything else.

Thanks for the help!

A:Random BSOD, 3 crashes, error 0x000000d1, 0x0000000a, and 0x0000003b

Welcome to Seven Forums.

Kaspersky is often a cause of BSOD's. Please uninstall it for the time being and keep MSE. You can install i back if it was not the cause of your BSODs. Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free

Do not start the trial version of MalwareBytes

You may also take a look at: Good & Free System Security Combination
Reduce the start-up items, Antivirus software is basically whats required. Remove Startup Programs in Windows 7
Clean Startup in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible: Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow - read here
Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Tes... Read more

Read other 1 answers

Had a BSOD on Sunday. Took the sides off the computer to find the heatsink caked in dust. Cleared that out with some compressed air and seemed to do the trick just fine. Computer fan running much quieter too then.

All fine on Monday and then cranked the PC up this evening and BSOD again. Couldn't get Windows to start, so tried removing RAM and then removing all hard drives except my boot drive containing Windows. Set up is SSD with Windows on, second SSD with programs on, HDD for files and data and second HDD for backup; that set up has been running fine for some time.

Have managed to get Windows to load and no BSOD currently, with three drives plugged in and the main HDD for data NOT plugged in. Not sure if that drive is the common problem.

Some BSOD messages I have seen, before it vanishes, include PAGE_FAULT_IN_NONPAGED_AREA and REGISTRY_ERROR and SYSTEM_SERVICE_EXCEPTION

Any help and advice much appreciated. The diagnostic data was run without said HDD plugged in.

Brief update.....
PC still running but trying to shut down, I get a Windows Explorer has stopped working error, as below. Could this be linked to the other drive not being plugged in? The unplugged drive contains my 'Desktop' so I wonder if this is confusing Windows somehow. Only way to shut down seems to be to just power off.

Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Na... Read more

A:BSOD multiple errors, error 0x00000050 and error 0x0000003B

Hiya and welcome to SevenForums!

BugCheck A, {fffff900008d1ee9, 0, 0, fffff80002ad41dc}

Probably caused by : win32k.sys ( win32k!AllocThreadBufferWithTag+24 )

Followup: MachineOwner
Hmm, re-install Windows as your getting 0x51 errors because 0x51 errors are registry related errors.

Read other 9 answers

Toshiba Satellite M105-S3041Intel CentrinoWindows XP HomeLast week, I was surfing the internet and listening to online music as usual. Suddenly, my laptop shut itself down and automatically rebooted itself. I'm unable to access Windows because it keep on rebooting. I tried to reboot it into safe mode, here are the options when I press F8. "Windows Advance Options MenuPlease select an option :Safe ModeSafe Mode with NetworkingSafe Mode with Command PromptEnable Boot LoggingEnable VGA ModeLast Known Good Configuration (your most recent settings that worked)Directory Services Restores Mode (Windows domain controllers only)Debugging ModeDisable automatic restart on system failureStart Windows NormallyRebootReturn to OS Choices Menu" Every option I've chosen, I got this page;"Please select the operating system to start :Microsoft Windows XP Home EditionMicrosoft Windows Recovery Console" And when I selected "Microsoft XP Home Edition", it started to reboot itself again.....and again.Then I tried F8 again, this time I chose "Disable automatic restart on system failure". Then I see this message;"A problem has been detected and Windows has been shut down to prevent damage to your computer.IRQL_NOT_LESS_OR_EQUALIf this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps :Check to make sure any new hardware or software is properly installed.If this is a new ... Read more

A:Laptop got blue screen error. 0x0000000A (0x00000000, 0x00000002, 0x00000001, 0x804DC11D)

I would try the Recovery Console option, if Last Known Good Configuration yields nothing positive.

If the RC option works, type 1 when asked which install. Just hit Enter when a password is requested.

On the next line awaiting input from you...type chkdsk /r and hit Enter.


Read other 9 answers

I'm new to my office, since I started working here I'm getting this constants BSODs, but checking the windows logs it seems like it started happening long ago.
A week ago I unnistalled several drivers and software (including avastt and daemon tools) and it stopped crashing, but it was almost imposible to boot, it kept getting bsod after the windows logo screen, but I had no problem when booting in safe mode. Sometimes it'll just boot normally and wont crash anytime and next day it won't boot :sarc:.
I'd tried cleaning the registry using CCLEANER, SmartPCFixer, updated drivers with Driver Booster 2 and manually, run Spyware Terminator ETC. Nothing worked, I keep getting the "Stop error code 0x0000000A (IRQL_NOT_LESS_OR_EQUAL)" BS.

And It's impossible to run a memcheck or reinstall the SO since it's the only PC available, but I'll try to clean the RAM slots when I can..

- Dump files and screen shots -

(Sorry about my english)

A:Multiple DSOD ntoskrnl.exe + various errors + Stop error code 0x0000000A

When you can, check the hard drive by going to Computer, and right-click on the C drive. Select properties, tools, check now. Put a check mark in both boxes to set a disk check on the next start up. Use Memtest86 version 5.01:
Run it when you can for at least 7 passes. Any errors mean trouble

Read other 1 answers

Hi y'r all

I think that for about a year ago is started to have BSOD. This was after 1 year of running this pc with no problems. Normaly make a fresh windows install 2 times a year.
Mostly the first time i started up my computer it gave an BSOD. After the restart the computer worked fine. This type of starteup i could live with, the 1 BSOD after startup i had accepted
After installing a fresh WIN7 i still got this type of BSOD.
Yesterday, when returing from a week holiday the computer gave an BSOD the first startup. After that i restarted and it BSOD again after some time.
When the BSOD apears, first the screen fades in colored lines and the BSOD screen is there.

I searched the internet and read that i maybe caused by an graphic card driver.
So i deleted the Catalys software and drivers for my 2 videocards AMD HD-6800.
After that it did not BSOD anymore in that session.
This morning it gave an BSOD on startup again. No more restarts or BSOD in this session.

I did the memtest for about an hour, no problems there. Had all 4 memory banks filled (8gb total) as have run speccy and can upload my specs.
I did not overclocked or changed settings for memory in the BIOS. Used the default AHCI option.
Updated my bios to the newest firmware.

I attached the SF zip file and this is an overview of my since 7-3


A:multiple BSOD (IRQL_NOT_LESS_OR_EQUAL 0x0000000a)

Lets run SFC

Click on the - type cmd in Search Box -> CMD find at top and RIGHT CLICK - RUN AS ADMIN

Enter this at the prompt -
sfc /scannow
How to Repair Windows 7 System Files with System File Checker

SFC /SCANNOW Command - System File Checker

Read other 8 answers

Hi. I have a bit of a situation at a construction site that I support. The guys there decided against having their own internet connection and decided to take up the offer to use the client's network. A cable was put in from a switch on their system to a switch in the site office cabin and distributed to a number of RJ45 sockets via a patch panel. The guys configured their laptops to connect via the client's proxy server, connected to the office LAN via the usual VPN client and everything was going great until suddenly, after a couple of days, all of the computers simultaneously blue screened and kept blue screening on every reboot attempt until the network cable was disconnected. After 10-15 minutes they'd re-connect the network cable and everything went back to working normally.
The laptops used were; three Dell Latitude E5440, one Dell Latitude E5430 and one Dell Latitude E5410. All run Windows 7 Enterprise x32 and all have, drivers aside, the same build. Oddly one of the laptops was unaffected by the crash. The old E5410 kept working while the others crashed. This makes me lean towards a driver related issue but as each machine has the latest driver for its specific model I don't really know how to tackle the issue. I don't particularly want to downgrade any of the laptops by rolling back drivers. Has anyone here seen this before? Are there any network events that can cause such behaviour? I'd be grateful for any ideas of where to start with this one.

A:Multiple PCs simultaneously BSOD 0x0000000A

Compare the dates on the network drivers between the 3 laptops - are they all the same, or is the date on the E5410 newer than the other two?

Read other 1 answers


I am trying to fix a computer for a relative, but cannot seem to figure out the cause of these BSOD's, they are frequent, with the computer running typically for less than 5 minutes before crashing out, once or twice for longer since I've received it. I removed expired versions of norton internet security and another norton program as well as a basic virus scan with malwarebytes. The laptop also passed a single full pass from memtest.

Attached is the seven forums.zip requested.

The computer is a sony vaio laptop running windows 7 home premium 64bit

Thank you for your time.

A:BSOD Frequent Errors 0x0000000a and 0x0000000e

The good news is that all your dump reports were consistent. The bad news is that they indicate a driver as the problem. The driver is a Microsoft Driver and is actually not the cause, however. This consistency leads me to believe that it is a driver problem. Use Driver Verfier to help us find out which one.

Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to cr... Read more

Read other 9 answers

Hi Guys,

Recently I've got these two BSOD errors on my brothers computer. They've both only happened once but from past experience I've discovered that if you get a BSOD once your probably gonna keep getting it until you resolve it. The computer's not overclocked and I haven't installed any new drivers recently and I've had this computer for about 2 years with no problems before about a month ago. This is my brother's computer so the specs listed in my profile are not for this computer. I'll post the specs for this PC below.

The two files it says are responsible are win32k.sys and nvBridge.kmd. By the second one, I'm guessing it might have something to do with the graphics card but I''m not sure. I've attached the dump files for you guys to have a look at. I would really appreciate if one of the tech savy guys here could help me with this issue. Thanks

PC Specs:

Windows 7 Professional x64
Asus Rampage III Extreme
Intel Core i7 950 3.07Ghz
3x2GB 1600Mhz Corsair Ram
2 x Nvidia GeForce GTS 450
Seasonic 850w Power Supply

A:BSOD Errors 0x00000050 & 0x0000003b

Can someone please help me with this problem.

Read other 1 answers


I've recently had a few alarming issues with my PC, the most recent ones relating to BSODs. The first BSOD was an error '0x0000003b'. According to Bluescreenview, it had something to do with my Nvidia drivers. This happened when I was running ModernWarfare 2 in the background, Skype, Google and VLC media player. This was about 2 or 3 days ago. I once again had a BSOD today. This time, it was an error '0x00000050' and had something to do with Direct X. It happened shortly after I exited Modern Warfare 2 and had Skype, Google chrome and VLC media player running. I have not tried any heavy games like BF4 or Watch Dogs recently, but they played fine a few weeks ago.
Some extra details: Very recently, a little over a week ago, I had changed a BIOS setting (disabled legacy booting) after which my PC did not turn on. It gave 3 beeps. I had removed one stick of RAM and my Graphics card, and flashed the BIOS, after which it ran fine. I decided to re-install Windows. I had lost my Windows 8 disk, so used Windows 7 instead. This fairly new installation of Windows 7 seems to be causing a problem. Also, I tried doing a Memory Diagnosis of Windows. I do not believe it found any errors. Another interesting note is that several games have crashed on my old installation of Windows 8 due to my Graphics driver not responding or some Direct X error, but it never caused any BSODs.

My specs: Intel DH61WW, 8Gb of Ram (2 sticks of 4gb Corsair memory), GTX 550Ti 1gb Inno 3D, Intel i5 230... Read more

A:Windows 7 BSOD Errors '0x0000003b' and '0x00000050'.

Hi Abul Rahman Ema.

You have two crash dumps in the uploaded zip and none of them has anything with nvidia driver.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us back about any further BSOD after installing Service Pack 1.

BugCheck 50, {fffff900c225bcf0, 0, fffff9600032c69d, 0}
Could not read faulting driver name
Probably caused by : win32k.sys ( win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d )

Followup: MachineOwner

BugCheck 3B, {c0000005, fffff960001a4283, fffff88005a6c020, 0}

Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )

Followup: MachineOwner

Read other 9 answers

Hi, I recently upgraded my system with a new graphics card and SSDs, and a new PSU. I installed windows 7 x64, and now I've had 2 BSODs within 24 hours. The first one occured while I was playing Deus Ex: Human Revolution. The error was 0x0000003B and the faulty file was dxgmms1.sys. I reinstalled the graphics drivers and it hasn't shown up anymore. Now, I was installing GTA IV and watching a video on youtube, and got another BSOD, this time with error 0x000000BE. I can't seem to isolate this problem. I've attached the files in the zip archive.

Also, i think its worth mentioning that the when I installed windows, I used a 32bit driver for the SSD RAID 0 array since windows wouldn't take the 64 bit driver because it wasnt signed(although the driver did have the signature file on the disk). After the installation finished, Windows automatically updated the RAID driver.

AMD Phenom II 1090T CPU
Gigabyte GA-870A-UD3 motherboard
EVGA GTX 690 Graphics Card
2x 90GB Kingston HyperX SSDs in RAID 0
4x 4GB Mushkin DDR 3 1066 RAM
1300W Rosewill PSU


A:BSOD during general use, errors 0x0000003B and 0x000000BE

Security Software: ??? I recommend the following:Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, see the Good and Free system security combination. for better security steps and scanning tools. Make sure to update the security software before running the full scan with it.
For the new hardware, I would recommend getting the latest BIOS. Also, does your SSD hardware have its latest firmware installed?

I see you are running a RAID configuration. RAID is designed more for servers than for the home user in mind. It often results in problems with data corruption and disk related issues when used in a home computer. Further reading: Why RAID is (usually) a Terrible Idea - Puget Custom Computers

Read other 1 answers

I had more bsd, but I think the 0x3b and 0xd1 are fixed. Any help would be appreciated. This is so frustrating. If its hardware related, I need help figuring out what. All my parts are new from newegg except for gpu and processor. I don't think its my ram because I swapped out different ram from my old pc and got same errors and that ram works flawless in other pc. Ran sfc scan now and chk disk and no errors. I am uploading the files you requested posted in instructions.

A:multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050

The last 4 .dmp files point to a possible RAM problem. The only way to check that is to run a minimum of 8 consecutive passes of Memtest86+ as described here:

RAM - Test with Memtest86+

It is not sufficient to install the RAM into a different system as a test.

Read other 9 answers

Hey guys,

I'm having some issues with a newly built . I've now recieved two (2) 0x03b BSOD's both citing different files as the culprit. I had a previous issue with the system randomly rebooting, but I remedied this by increasing my VTT voltage to 1.15 because I have 16gb of memory.

It ran perfectly after that for about 2 weeks, then the BSOD's started.

They happen randomly, when just web surfing or idle, and they don't seem to be caused by stressing the system.

I was successfully able to run multiple stress tests like Prime95, Intel Burn-In, for 24 hours with no issues, but then will get a BSOD randomly surfing the web or just having the PC be idle.

I've attached my error files and minidump files according the thread stickied, hopefully you guys might be able to point me in the right direction for firguring out the issue.


System specs:

Intel i5 2500k
2x MSi 560 Ti Twin Frozr II in SLi
ASuS P8p67-Deluxe Motherboard.
16gb G.Skill DDR3 Ram
Corsair 750W TX Enthusiast PSU.
Windows 7 X64 Ultimate Retail

My system is not overclocked, all drivers are updated, all windows updated are applied, and BIOS is on the latest firmware.

Temperatures aren't the issue either I don't believe., I've been monitoring them with MSi Afterburner and Realtemp.

A:Multiple BSOD, New System. (0x0000003b, win32k.sys, hal.dll)

Quote: Originally Posted by TotalMalice

Hey guys,

I'm having some issues with a newly built . I've now recieved two (2) 0x03b BSOD's both citing different files as the culprit. I had a previous issue with the system randomly rebooting, but I remedied this by increasing my VTT voltage to 1.15 because I have 16gb of memory.

It ran perfectly after that for about 2 weeks, then the BSOD's started.

They happen randomly, when just web surfing or idle, and they don't seem to be caused by stressing the system.

I was successfully able to run multiple stress tests like Prime95, Intel Burn-In, for 24 hours with no issues, but then will get a BSOD randomly surfing the web or just having the PC be idle.

I've attached my error files and minidump files according the thread stickied, hopefully you guys might be able to point me in the right direction for firguring out the issue.


System specs:

Intel i5 2500k
2x MSi 560 Ti Twin Frozr II in SLi
ASuS P8p67-Deluxe Motherboard.
16gb G.Skill DDR3 Ram
Corsair 750W TX Enthusiast PSU.
Windows 7 X64 Ultimate Retail

My system is not overclocked, all drivers are updated, all windows updated are applied, and BIOS is on the latest firmware.

Temperatures aren't the issue either I don't believe., I've been monitoring them with MSi Afterburner and Realtemp.

These were Related to RTCore64.sys MSI Afterburner from Micro-Star Int'l Co. Ltd. Yours is from 2005 I would remove it at least to test.

Read other 4 answers

I've had my Samsung laptop since summer 2012, and I get random BSOD shutdowns. This has happened since I got the computer, basically. I bought it in the US and now live in Hungary and depend on it for my job, so I have not been able to send it away while under warranty.

Anyway, sometimes I get the error more than once a day. Sometimes I don't get it for a week or two. As I said, it seems completely random. More recently, if I close the laptop and put it in my bag, it will have restarted on my walk home. As the thread title says it is most often 0x0000003B, though once is a while it is something like "0x000000D5" (I have to admit I'm not 100% here).

It's frustrating problem, and I'd just resigned myself to it. I only found this forum this evening and performed the SF Diagnostic (attached). I hope this gives you enough information.

A:Random BSOD errors on year-old laptop, usually 0x0000003B

Hello jdenn81.

It is a multifold issue, but the main issue is network related. It is caused by Kaspersky, mainly. Kaspersky uses some Zone Alarm services like True Vector. And Trye Vector hijacks TCP connections; which results in ntework blockage, and causes BSOD.

fffff880`0b094770 fffff880`04bc5430Unable to load image \SystemRoot\system32\DRIVERS\vsdatant.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vsdatant.sys
*** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys
Description here: Driver Reference Table - vsdatant.sys

It is caused by this element in your system : c:\program files (x86)\checkpoint\zonealarm\vsmon.exe

Alongwith this one, Kaspersky itself is failing, too.

fffff880`0b095538 fffff880`03640000Unable to load image \SystemRoot\system32\DRIVERS\kltdi.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for kltdi.sys
*** ERROR: Module load completed but symbols could not be loaded for kltdi.sys
fffff880`0b095540 fffff880`0364c4e0 kltdi+0xc4e0
fffff880`0b095548 fffff880`03640000 kltdi
fffff880`0b095550 fffff880`0364c4b0 kltdi+0xc4b0
fffff880`0b095558 fffff880`03640000 kltdi
fffff880`0b095560 fffff880`0364c498 kltdi+0xc498
fffff880`0b095568 fffff880`03640000 kltdi
fffff880`0b095570 fffff880`0364c36c kltdi+0xc36c
fffff880`0b095578 fffff880`03640000 kltdi
fffff880`0b095580 fffff880`0364c24c kltdi+0xc24c
Description here: Driver Reference Table - kl... Read more

Read other 5 answers

I've tried to figure it out for ages and nothing works. It has happened so frequently that I've just sort of adapted to it interrupting me on a daily basis. Maybe you guys can chime in? I'm lost..

errors include: System Exception 0x0000003B, 0x00000000C0000005, 0xFFFFF800034C9044, 0xFFFFF88009136050, 0x000000000000000

and: STOP:0x000000BE / Win32k.sys etc.

Happens mostly while playing games, but also can occur during just regular browsing, etc.

A:BSOD While playing various games and just browsing, Errors: 0x0000003B

Still trying everything via. tips in this forum, nothing.

Read other 5 answers

Keep blue screening, but only while playing Witcher 3 and only in the last week or so (after installing expansion data or could be due to a GOG update, hard to tell as both have occurred within the last week or so I believe so not sure which may be triggering the issues. I have the game on GOG and have tried a million fixes, but none work, so I am just hoping that something helpful might be learned from my .dmp files to help me figure out what is causing the issue.

I have updated to the latest drives and am not currently running antivirus software that could be conflicting. I have also turned off things like Gefore Experience and the GOG in-game overlay (and 100 other things), so this is my last hope.

Any help you can offer would be appreciated (ok if you can solve this, then I'd actually love you forever and might be willing to give you my first born).

I'm hoping all my system spec info I filled out when I registered is visible, if not I can reply with that info. I also took a picture of my last two BSOD, so can upload those if needed as well. Just let me know.


Read other answers

Hello All,

First off Thank you for looking at this post. I will begin with some history with this machine. I am Running an Asus N56VZ I will attach all the Specifications for this in a text file. I Keep getting random BSOD as you can see in the title they are random but i have gotten each at least twice. I have read online that first off this laptop has issues with the stock memory that comes in it because the timing is off. I bought memory that is of the correct timing. I just tested the memory today with Memtest86 and it all checked out. I updated all my drivers they are all of the latest. I Completely removed my Nvidia Graphics card drivers (also hit delete driver under computer management when i installed) and reinstalled it using the lasted drivers through Nvidia's website. Updated my chipset driver, storage controller driver. I am not sure what else to do. although people online all have memory issues with this laptop and they all either buy the memory i have or they use a modded bios. I already made a post requesting a modded bios on biosmods and am waiting for someone to make one. I figured i would see if someone else can shed some light on this issue. I will attach the .dmp files as well.

Thank you,
Ben M

Read other answers

While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much appreciated, thank you!

Is Windows 7 . . .
- x64
- the original installed OS on the system? windows 7
- an OEM or full retail version? full retail

- What is the age of system (hardware)? 1.5 yrs
- What is the age of OS installation (have you re-installed the OS?) 1.5 yrs. have not reinstalled OS

System Specs
CPU: AMD Phenom(tm) II X4 920 Processor
Motherboard: ASUSTeK Computer INC. M4A785-M
BIOS: BIOS Date: 04/14/10 17"53:51 Ver: 09.06
Total Memory: 4.00 GB
Usable: 3.75 GB
HDD: (1) ST31000520AS ATA Device (2) Seagate Portable USB Device
Sound Card: (1) ATI High Definition Audio Device (2) High Definition Audio Device (3) C-Media PCI Audio Device
Graphics Card: ATI Radeon HD 4200
OS: Microsoft Windows 7 Home Premium 64-bit 7600 Multiprocessor Free

A:BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

Read other 9 answers

Hi Guys,

This is my first attempt at building my own computer so I am not a pro by any means. I've been having issues with blue screens ever since I put the thing together. All the parts are new out of the box. When I first put the machine together I did some troubleshooting on my own and with a NewEgg tech. The tech couldn't pin point the issue so he advised me to RMA the motherboard and RAM.

I got the replacement motherboard and RAM a few days ago but the issue persists. I am using BlueScreenView to look at my minidump files. BlueScreenView is listing all kinds of drivers and errors. Nothing really consistent. The time between crashes is also random. Sometimes it will crash when I login to windows and sometimes it will take a couple hours depending on what I am doing. I have noticed that I can crash it by opening a bunch of browser tabs and windows.

Here is a list of things I have tried:
1. RMA motherboard and ram
2. Downloaded latest drivers from gigabyte website and nvidia
3. Removed graphics card and used built in graphics (Have not tried with new RMA parts)
4. Updated motherboard BIOS from F3 to F6 version
5. Disabled built in graphics from BIOS menu
6. Tried 1 stick of ram at a time (Have not tried with new RMA parts)
7. MemTest 86 got Zero errors
8. Reinstalled OS (tired this with original parts and with new RMA parts)
9. Uninstalled anti virus
10. Updated fireware on ssd drive (c: drive)
I've don't troubleshooting with NewEgg techs and Gigabyte techs and... Read more

A:Constant BSOD on new custom build - Various Minidump Errors 0x0000003b

Please follow | Windows Genuine and Activation Issue Posting Instructions

Read other 9 answers

I just built a brand new system and to my dismay have have several bsod's. I believe I have all the up to date drivers, and have tried running memtest86+, but found no errors. I've run a disc check, and also run sfc /scannow 3 times. I've run driver Verify. Still having bsod's so it's probably a driver issue right?

System Specs:
Microsoft Windows 7 Home Premium 64-bit
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
ASRock Z68 Extreme3 Gen3
BIOS Date: 11/22/11 11:12:52 Ver: 04.06.04
Seagate 1TB HDD
NVIDIA GeForce GTX 560 Ti
CORSAIR Vengeance 8gb DDR3

I've had some windows updates that fail to install. One of which is sp1. I've tried using the system update readiness tool provided by MS Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011] - Microsoft Download Center - Confirmation, which sucessfully installed the hotfix, but sp1 still wouldn't install. I followed MS's instructions to insert my win7 disk and install win7 as an upgrade with updates installed from the internet, but still have some bsod's

I'm also not sure if it's worth noting that my libraries are no longer working, see attached jpg.

I've attached my dmp files from before the win7 upgrade, and after. I would be grateful for any help.

A:BSOD: ntoskrnl.exe Multiple Error Codes: 0x0000003b, 0x00000024, etc

When I get home from work I'm going to try seating the ram in different mobo slots and try them out individually. If that doesn't work I'm going to try a clean windows install on another HDD I have. I'll post afterwords.

Read other 9 answers

I've attached the zip file of dumps from BSOD.

This is on my sisters computers which I can only access remotely.

Specs as follows:
Rosewill R363-M Case with PSU
Biostar A75MG FM1 Mobo
AMD A6-3500 Llano CPU
Partiot Gamer 2 Series 8GB (2x4GB)
OCZ Vertex Pus R2 60GB SSD
Windows 7 x64 with SP1 installed

Any help is appreciated.

A:BSOD - Random Usage - multiple error codes - 0x0000003b

Start with testing RAM.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes. *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot. *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot. *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, ... Read more

Read other 3 answers

As said above in the title, I have been getting multiple BSODs on this new build. The build is using mostly old parts except for the motherboard, CPU, PSU, and card reader. The HDD, ODD, and RAM are all reused from previous computers.

It's been almost every day that I would get a BSOD on this machine. The major driver files seem to be ntoskrnl.exe and Ntfs.sys. A few other ones have shown up as well, such as dxgmms1.sys and win32k.sys.

The BSODs seem to occur at random times, however most recently they have occurred when watching .avi videos in full screen.

I have attached below all the minidumps that I have along with the last few events in event viewer. There are tons of errors in event viewer.

The specs of the computer are as follows:
AMD Athlon II X2 250
Motherboard is part of the Shuttle SA76G2 V2
2x 2GB OCZ2P8002G PC2-6400
Windows 7 SP1 X64
Onboard HD Radeon 3000

Please let me know if you need anymore information.

A:Multiple BSOD erros (0x0000003b, 0x0000007f, 0x0000001a, 0x0000001e) &


Read other 9 answers

Been getting frequent BSOD past few months, like 2/3 times in a month. Only recently have I started getting crashes every other day. It isn't even a BSOD, it just crashes and restarts as if it was a BSOD.

A:BSOD randomly while playing multiple games and idle, error 0x0000003b

You do not have Service Pack 1 installed.
Make sure you install it to prevent vulnerabilities in your system.

Version 6.1.7600 Build 7600
Install all updates using Windows Update.

DAEMON Tools Ultra Agent "c:\program files (x86)\daemon tools ultra\dtagent.exe" -autorun Ziyue-PC\Ziyue HKU\S-1-5-21-1359861946-2656565172-626367282-1000\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
Daemon Tools/Alcohol is known cause of BSODs, you will have to find an alternative as there is no way around this.

Registry and SPTD problems | DAEMON Pro Help
How to remove sptd.sys from system

1. Uninstall Daemon Tools.
2. Download the SPTD standalone installer and follow these steps:
3. Double click the executable to open it
4. Click the button shown below

If the button it is grayed out, as shown in the image, there is no more SPTD installation on your system, and you can just close the window.

Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Your display driver is also causing issues.

2: kd> lmvm atikmdag
start end module name
fffff880`13e9a000 fffff880`14b88000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: atikmdag.sys
Image name: atikmdag.sys
Timestamp: Fri Nov 29 16:59:33 2013 (5... Read more

Read other 1 answers

Hello, and thanks for trying to help with this. I am having issues with several crashes, and one thing is constant. It only happens when graphics are involved. My pc crashes on games such as LoL, CoD:BO 1 and 2, Minecraft, and (for that random variable) Grim Fandango Remastered. I get 0x0000003B, 0x1000007e, and 0x00000109. If there was audio playing, it usually bugs out the speakers.

Only recently (as of the date of this thread) has something stranger occurred. 0x0000003B happened, but the audio looped back on the last 10 seconds of music playing. Attached is the crash report. Again, thanks for any help

Read other answers

Hi, new to this forum, been getting BSOD's for quite some time and figured this would be a good place to get some help.

Last BSOD I had was error 0X0000010E, I've attached 2 DM Log Collector files for the last 2 BSOD's I've had, the BSOD's tend to vary each time I don't get the same one constantly. Any help would be greatly appreciated.

Possibly related, windows will try to install 110 updates upon shutdown, when starting up the comp it will try to configure the updates, after several minutes, it will fail and revert the changes every time.

A:BSOD watching stream error 0X0000010E

Another BSOD today. refering to IRQ not less or equal.

Read other 9 answers

Hey guys,
As you can see i'm new to the forums so hopefully I get this right.
I've been having BSOD for months now, and unfortunately I've been unable to figure out the problem.
the latest error i've gotten was 0x0000010E but i've gotten others.
It can happen when gaming on steam, or video editing.
BSOD occurred not too long before posting this thread and I was literally doing nothing on my PC, just sitting on steam not playing any games.
This past day i've gotten 5+ blue screens and I just can't take it anymore.
hopefully the information within the attached file will help solve this issue.
I actually ran SF Diagnostic through safe mode, hope that's ok.
If not I can try to run it while in regular mode.
Thanks in advance.

A:BSOD While gaming + video editing, error 0x0000010E

Welcome to Seven Forums !

You said you have had experienced many bugchecks lately yet none are found,
all bugchecks are from January and earlier.
Attachment 287436

None the less, I've looked at all the 2013 dumps and they all incriminate Xeno7x64.sys.
Which is very very old;

lmvm Xeno7x64
start end module name
fffff880`02cf2000 fffff880`02d15000 Xeno7x64 T (no symbols)
Loaded symbol image file: Xeno7x64.sys
Image path: \SystemRoot\system32\DRIVERS\Xeno7x64.sys
Image name: Xeno7x64.sys
Timestamp: Wed Jun 03 02:15:48 2009

xeno7x64 Killer Xeno Gaming Adapter Service c:\windows\system32\drivers\xeno7x64.sys
Driver Reference Table - Xeno7x64.sys
Please remove the driver by uninstalling Bigfoot Networks using RevoUninstaller

Start Menu\Programs\Bigfoot Networks\Xeno Suite

Post back with the results!

Read other 9 answers

Multiple BSODs over the last year, sometimes while logging in, sometimes after 15 minutes of running. Have tried SFC/SCANNOW, memory test, CHKDSK, all with no reported errors. Did a system restore to Windows 8 a while back and kept getting BSODs. Could it be a hard drive problem, or a simple drive upgrade? Im currently working on trying to update all my drivers to see if that will fix it. All help is appreciated.

A:Multiple BSOD errors from multiple drivers, no luck fixing so far

Oh and I replaced the RAM and was still getting BSODs so I put my factory ones back in.

Read other 1 answers

windows 7 x64
- original install on system but i don't have my disks. they are somewhere...
- full retail version installed
- age of the system is approximately 3 years
- age of the install is approximately 2 years

it seems to happen at random but i get BSODs. approximately 2-3 times a day for a week or so. then nothing for a few days. I cannot seem to reproduce it manually.

i've attached my dump files and health report as advised on this site.

i disabled my antivirus before running this set of error reports as a precaution.
any help would be greatly appreciated.

A:BSOD errors. multiple times during multiple programs

Have you recently added any RAM or new hardware to this system?

Uninstall Any Daemon Tools that you have installed. Those are a common reason for BSODs

try these:
SFC /SCANNOW Command - System File Checker

Disk Check

Post back results please.

Read other 5 answers

Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle!

So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or none for a few days. They don't seem to happen because of any application either. They seem to occur randomly.

The error's that appear to be the most common is the 'driver_irql_not_less_or_equal' and the 'memory_managment' error. Others have occurred I just can't remember them. Another problem I've noticed is that my graphics driver would crash occasionally even though it is up to date.

I use my computer as a gaming pc and for video editing so its under some heavy pressure I would presume. Any help would be much appreciated! I attached the event files aswell.

A:Multiple BSOD's with multiple errors occuring randomly

Hello Andy!

► Uninstall the following programs.
Start Menu\Programs\AVG : Replace with Microsoft Security Essentials - Microsoft Windows
Start Menu\Programs\DAEMON Tools Pro
Start Menu\Programs\MagicDisc
Start Menu\Programs\MagicISO
► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
► Enable Driver Verifier

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck C5, {0, 2, 0, fffff800033fc6fb}

Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+ca7 )

Followup: Pool_corruption

0: kd> !analyze -v
* *
* Bugcheck Analysis *
* ... Read more

Read other 9 answers

Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I replaced it with a new hitachi. After installing windows and running smoothly (updating everything and installing) for several hours, I had a blue screen again. I ran memtest86, and received 0 errors, so I'm assuming it's not my RAM, and because it's a new installation of windows and a new hardrive I'm assuming those aren't the issues. I am planning on taking it in to a shop tomorrow to see if they can diagnose what's malfunctioning, but if someone here can tell enough, then I would appreciate it.

Blue screens happened at multiple temperatures (~20C ~36C)

Blue screen 1 event log (I did not save the first problem signature)

- Provider

[ Name] Microsoft-Windows-Kernel-Power
[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID 41
Version 2
Level 1
Task 63
Opcode 0

Keywords 0x8000000000000002

- TimeCreated

[ SystemTime] 2013-10-13T17:27:50.558821000Z

EventRecordID 2467


- Execution

[ ProcessID] 4
[ ThreadID] 8

Channel System

Computer Pirro

- Security

[ UserID] S-1-5-18

- EventData

BugcheckCode 26
BugcheckParameter1 0x403... Read more

A:BSOD Multiple times multiple errors 0x0000001A

Hello and welcome, please try the steps below.

Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to... Read more

Read other 1 answers

Hi Everyone,

Been having these random bluscreens for the past 3 months and can't figure out whats the cause.

Memtest passed (Ran for at least 48hrs), Passmark for 8+ Hours, Intel BurnTest for 24+ Hours!
All hardware has been replaced twice, including changing from intel to AMD, changed memory & ssd brands, you after clean install of Windows 8.1 with full updates (multiple times)

All with the same BSOD sets, can take 5 mins or 3 days, random actions cause it.

Any help would be much appreciated

Only basic software intstalled, critical application is Reckon's Accounts 2015 R1 but was working fine on old PC (but that died).

Also notice alot of IE crashes (different modules) so something funny going on...

A:Multiple bsod (0x0000001a,0x100007e,0x0000001a,0x0000003b,0x00000109)

Your getting quite a variety of different bug check/error codes, and unfortunately none of them are conclusive. I did, however, spot something, and think its worth looking into:

* *
* Bugcheck Analysis *
* *

Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arg1: 0000000000000002, A list entry was corrupt
Arg2: 000000000012777f, entry in list being removed
Arg3: 000000000023efff, highest physical page number
Arg4: 0000000000000001, reference count of entry being removed

Debugging Details:





ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre

LAST_CONTROL_TRANSFER: from fffff803c55a3008 to fffff803c555aca0

Trend Micro Password Manager Central Control Service PwmSvc Running Auto Own Process "c:\program files\trend micro\tmids\pwmsvc.exe" Normal LocalSy... Read more

Read other 2 answers

I hope someone can help. I have been recieving many random (to me) BSOD's.

The (Two month old) laptop gets so many that it cannot be booted into any Windows mode (including safe mode). My only option is to restore the PC using HP's F11 (factory restore).

I have managed to capture two .dmp files, and have attached the relevant items as per the sticky post.

So far I have clocked the following errors:
[STOP 0x000000F4]
[STOP 0X000000C4]

Many Thanks for looking

Windows 7 64bit (Home Premium) (OEM)
Two month old HP laptop
Few days

A:Multiple BSOD, Multiple STOP errors

Hello Gingbeard,

Symantec is a frequent cause of BSOD's.
I suggest you remove it and replace with Microsoft Security Essentials AT LEAST TO TEST.

Microsoft Security Essentials - Free Antivirus for Windows

Let us know how you go.

Read other 9 answers

Hey EightForums,

I am new to you however not new to troubleshooting over forums as I used to run Ubuntu and as you may know that is non-stop forum troubleshooting.

So lets get into this. Having some trouble with my girlfriend's windows 8.1 PC. I've tried doing a system refresh with no luck. The BSOD happens all the time however it happens most frequently while playing the sims4 which I just bought here. I've looked through the dump files and can only find that the kernel appears to be having some issues. I've attached the standard reports from the program in the sticky.

Please advise,


Attachment 54303

A:BSOD multiple errors, multiple situations

Hi CensoredBiscuit & Welcome to the forums ^_^,

Yups, non stop troubleshooting with Linux
I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

**************************Sun Nov 23 13:08:07.118 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\112314-35911-01.dmp]

Windows 8 Kernel Version 9200 MP (4 procs) Free x64

Built by: 9200.16496.amd64fre.win8_gdr.130108-1504

System Uptime: 0 days 0:02:56.834

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

BugCheck 139, {3, fffff80076428790, fffff800764286e8, 0}

Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: fffff80076428790, Address of the trap frame for the exception that caused the bugcheck
Arg3: fffff800764286e8, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved



**************************Sun Nov 23 13:04:38.242 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\112314-35521-01.dmp]

Windows 8 Kernel Version 9200 MP (4 procs) Free x64

Built by: 9200.16496.amd64fre.win8_gdr.130108-1504

System Uptime: 0 days 1:12:14.968

... Read more

Read other 1 answers

I was just playing around with my laptop and I received the dreaded BSoD. The error I was given was APC_INDEX_MISMATCH with the hexadecimal code 0x00000001. I have had this had to my laptop multiple times and I am asking if someone could please help. I also had to add the "Seven Forums" zip file made by using SF Diagnostic Tool.

A:BSOD Messing aroung on my Pavilion dv7-3165 then bsod with 0x00000001

We dont have the files that you said you added.

Read other 3 answers

i'm having random BSOD , and it happened more often since last few days and i dun know what causing it (usually happened when i not using comp)

From web saying it mostly cause by drivers, but BSOD started appeared after around 10 days when all my driver installed.

Thx for helpping.

A:random BSOD 0x00000001

Hello tszheil, Welcome to SF!


AlcoholAutomount "e:\program files (x86)\alcohol soft\alcohol 120\axautomntsrv.exe"
Aclohol(Daemon Tools) are well known for causing problems with windows. So please uninstall All Aclohol/Daemon Tools on your computer.

a7ry5oul.SYS http://www.runscanner.net/file/a7ry5oul.SYS.html
arq4bbxr.SYS http://www.runscanner.net/file/arq4bbxr.SYS.html
asqsiqmd.SYS http://www.runscanner.net/file/asqsiqmd.SYS.html
ads6m1ho.SYS http://www.runscanner.net/file/ads6m1ho.SYS.html
AxtuDrv.sys ht... Read more

Read other 3 answers

I got BSODs on my recently builded computer.
Every part are brand new expect psu which is one year old. I got this BSOD usually when im playing. Im running memtest at the moment. 0 errors.


CPU: AMD FX-8350 4ghz
GPU: Gigabyte R9 270X 2GB
RAM: 2x4GB Crucial Ballistix Sport ddr3 1600
MOBO: Asus M5A97 EVO R2.0

A:BSOD 0x00000001 win7

Please follow - http://www.techsupportforum.com/foru...ta-452654.html

Read other 1 answers

Hello guys, since I started using qBittorrent, I've been experiencing BSOD.
After reading through the forum, I've concluded that it has something to do with wireless driver.
But I don't know how to proceed from here.

Any help will be appreciated. Thanks in advance, guys.

A:BSOD bittorrent, error 0x00000001

The BSOD dumps included in the zip are too old, of 2012.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 9 answers

I Have an Acer Aspire AX1700-u37000A. The Computer will not load up to windows. All it does is it acts like its starting windows and it restarts. I tried to Run a fresh install but the computer freezes everytime. At Times computer seems like it will run fine but then it goes back into the same thing.

Things Ive Done.

(Changed Ram Sticks) Known Good Working Ram. No Good
(Changed 2 different Hard drives onto the system) No Good
(Jumped The Cmos) No Good.
(Changed Hard Drive Cable) No Good.

Reseated The Ram. No Good
Reseated The Graphics Card. No Good
Reseated CPU/Heat Sink with thermal Paste. No Good.

Switched Out the PSU with a known Good PSU. No Good. Still The Same Outcome.

Ran Memtest. Say Ram Is Good.
......Run Hard Drive Fitness Test. Said it was an error. Disposition 0x70.

But yet still Its not the hard drive because i used 2 different hard drives on the system and it did not work at all..

Im at My wit ends.

Only thing i could think of is maybe just maybe the SATA controller on the Hard Drive is no Good or Bad Motherbad.

Anyone else have an input?

A:BSOD Errors. Multiple Errors.

Any suggestions?

Read other 2 answers