Over 1 million tech questions and answers.

BSoD when coming out of sleep or undocking

Q: BSoD when coming out of sleep or undocking

A user of mine is telling me she gets a BSoD often when she wakes up her laptop from sleep, or if she tries to undock it. My free tools for analyzing the dump file aren't giving me anything useful, so I figured I'd post it here in case someone with better tools would give it a shot.

Thanks!

RELEVANCY SCORE 200
Preferred Solution: BSoD when coming out of sleep or undocking

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSoD when coming out of sleep or undocking

I've just had a quick look and the dump is blaming memory corruption, it would be worth doing some memory tests while you wait for the BSOD folks to take a good look at the dump.

RAM - Test with Memtest86+


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c0415e08, c0000185, 46c58860, 82bc15f3}

GetPointerFromAddress: unable to read from 82b74830
Probably caused by : memory_corruption

Followup: memory_corruption
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: c0415e08, lock type that was held (value 1,2,3, or PTE address)
Arg2: c0000185, error status (normally i/o status code)
Arg3: 46c58860, current process (virtual address for lock type 3, or PTE)
Arg4: 82bc15f3, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)

Debugging Details:
------------------
ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.

DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c0000185

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: CODE_CORRUPTION

PROCESS_NAME: System

CURRENT_IRQL: 0

TRAP_FRAME: 8ab13b88 -- (.trap 0xffffffff8ab13b88)
ErrCode = 00000010
eax=8ab13c20 ebx=00000000 ecx=8ab13c6c edx=82a46bcd esi=00000002 edi=00000002
eip=82bc15f3 esp=8ab13bfc ebp=8ab13c64 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!EtwWriteStartScenario:
82bc15f3 0000 add byte ptr [eax],al ds:0023:8ab13c20=5c
Resetting default scope

LAST_CONTROL_TRANSFER: from 82aaedd8 to 82ae9e9c

STACK_TEXT:
8ab139ec 82aaedd8 0000007a c0415e08 c0000185 nt!KeBugCheckEx+0x1e
8ab13a5c 82ab26b9 8ab13ab0 82b75300 8ab13ad0 nt!MiWaitForInPageComplete+0x302
8ab13aec 82a9b91b 82b75300 82bc15f3 84bb97b0 nt!MiIssueHardFault+0x3b3
8ab13b70 82a4c468 00000008 82bc15f3 00000000 nt!MmAccessFault+0x2656
8ab13b70 82bc15f3 00000008 82bc15f3 00000000 nt!KiTrap0E+0xdc
8ab13c64 82c9b43d 00000000 00000004 00000002 nt!EtwWriteStartScenario
8ab13cac 82c9b72f 00000000 00000002 00000004 nt!PopIssueActionRequest+0x187
8ab13ce8 82ad10de 82b4d060 848c1a70 82b463bc nt!PopPolicyWorkerAction+0x45
8ab13d00 82a88a6b 00000000 00000000 848c1a70 nt!PopPolicyWorkerThread+0x64
8ab13d50 82c14056 00000001 aa35f07d 00000000 nt!ExpWorkerThread+0x10d
8ab13d90 82abc1a9 82a8895e 00000001 00000000 nt!PspSystemThreadStartup+0x9e
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x19
STACK_COMMAND: kb

CHKIMG_EXTENSION: !chkimg -lo 50 -d !nt
82bc1001-82bc105e 94 bytes - nt!SmQueryStoreInformation+178
[ 90 90 90 90 90 8b ff 55:00 00 00 00 00 00 00 00 ]
82bc1060-82bc106f 16 bytes - nt!WdipSemQueryScenarioTable+5a (+0x5f)
[ 90 90 90 90 90 8b ff 55:00 00 00 00 00 00 00 00 ]
82bc1072-82bc107c 11 bytes - nt!WdipSemEnableScenario+d (+0x12)
[ 53 56 57 33 f6 33 ff 66:00 00 00 00 00 00 00 00 ]
82bc1080-82bc1082 3 bytes - nt!WdipSemEnableScenario+1b (+0x0e)
[ c6 45 ff:00 00 00 ]
82bc1084-82bc10a7 36 bytes - nt!WdipSemEnableScenario+1f (+0x04)
[ 6a 11 bb 64 b5 b4 82 59:00 00 00 00 00 00 00 00 ]
82bc10aa-82bc10d6 45 bytes - nt!WdipSemEnableScenario+45 (+0x26)
[ c0 be a8 66 a5 82 56 ff:00 00 00 00 00 00 00 00 ]
82bc10d8-82bc10de 7 bytes - nt!WdipSemEnableScenario+73 (+0x2e)
[ 85 ff 74 05 e8 76 30:00 00 00 00 00 00 00 ]
82bc10e1-82bc10f1 17 bytes - nt!WdipSemEnableScenario+7c (+0x09)
[ 8b 0d 64 b5 b4 82 8b c1:00 00 00 00 00 00 00 00 ]
82bc10f5-82bc10f9 5 bytes - nt!WdipSemEnableScenario+90 (+0x14)
[ 8d 41 f0 e9 84:00 00 00 00 00 ]
82bc10fd-82bc1107 11 bytes - nt!WdipSemEnableScenario+98 (+0x08)
[ 39 75 10 74 a2 80 3d 28:00 00 00 00 00 00 00 00 ]
82bc1109-82bc110e 6 bytes - nt!WdipSemEnableScenario+a4 (+0x0c)
[ 75 09 c7 45 f8 01:00 00 00 00 00 00 ]
82bc1111-82bc1116 6 bytes - nt!WdipSemEnableScenario+ac (+0x08)
[ c0 eb 97 e8 a2 1d:00 00 00 00 00 00 ]
82bc1119-82bc113b 35 bytes - nt!WdipSemEnableScenario+b4 (+0x08)
[ 3b c6 89 45 f8 7d 06 c6:00 00 00 00 00 00 00 00 ]
82bc113e-82bc1146 9 bytes - nt!WdipSemEnableScenario+d9 (+0x25)
[ 8b f8 3b fe 74 c7 e8 bd:00 00 00 00 00 00 00 00 ]
82bc1149-82bc1171 41 bytes - nt!WdipSemEnableScenario+e4 (+0x0b)
[ 39 75 f8 0f 8c 59 ff ff:00 00 00 00 00 00 00 00 ]
82bc1174-82bc1176 3 bytes - nt!WdipSemEnableScenario+10f (+0x2b)
[ 57 e8 f2:00 00 00 ]
82bc117a-82bc119f 38 bytes - nt!WdipSemEnableScenario+115 (+0x06)
[ e9 62 ff ff ff 33 c0 f6:00 00 00 00 00 00 00 00 ]
82bc11a2-82bc11a4 3 bytes - nt!WdipSemEnableScenario+13d (+0x28)
[ 8d 81 84:00 00 00 ]
82bc11a8-82bc11a9 2 bytes - nt!WdipSemEnableScenario+143 (+0x06)
[ 66 ff:00 00 ]
82bc11ab-82bc11ac 2 bytes - nt!WdipSemEnableScenario+146 (+0x03)
[ 0f b7:00 00 ]
82bc11ae-82bc11b6 9 bytes - nt!WdipSemEnableScenario+149 (+0x03)
[ 66 85 c0 75 16 8d 41 40:00 00 00 00 00 00 00 00 ]
82bc11b8-82bc11bd 6 bytes - nt!WdipSemEnableScenario+153 (+0x0a)
[ 74 0f 66 83 b9 86:00 00 00 00 00 00 ]
82bc11c2-82bc11c4 3 bytes - nt!WdipSemEnableScenario+15d (+0x0a)
[ 75 05 e8:00 00 00 ]
82bc11c6-82bc11cb 6 bytes - nt!WdipSemEnableScenario+161 (+0x04)
[ 23 e7 ff 80 7d ff:00 00 00 00 00 00 ]
82bc11cd-82bc11cf 3 bytes - nt!WdipSemEnableScenario+168 (+0x07)
[ 0f 84 8a:00 00 00 ]
82bc11d3-82bc11d6 4 bytes - nt!WdipSemEnableScenario+16e (+0x06)
[ 64 a1 24 01:00 00 00 00 ]
82bc11d9-82bc11dc 4 bytes - nt!WdipSemEnableScenario+174 (+0x06)
[ 66 ff 88 84:00 00 00 00 ]
82bc11e0-82bc11e5 6 bytes - nt!WdipSemEnableScenario+17b (+0x07)
[ 8b c3 f0 0f ba 28:00 00 00 00 00 00 ]
82bc11e7-82bc11f5 15 bytes - nt!WdipSemEnableScenario+182 (+0x07)
[ 73 07 8b cb e8 36 c9 ed:00 00 00 00 00 00 00 00 ]
82bc11f7-82bc11fc 6 bytes - nt!WdipSemEnableScenario+192 (+0x10)
[ 74 05 e8 f9 66 14:00 00 00 00 00 00 ]
82bc11fe-82bc1233 54 bytes - nt!WdipSemEnableScenario+199 (+0x07)
[ 8b 0d 64 b5 b4 82 8b c1:00 00 00 00 00 00 00 00 ]
82bc1236-82bc1238 3 bytes - nt!WdipSemEnableScenario+1d1 (+0x38)
[ 8d 81 84:00 00 00 ]
82bc123c-82bc123d 2 bytes - nt!WdipSemEnableScenario+1d7 (+0x06)
[ 66 ff:00 00 ]
82bc123f-82bc1240 2 bytes - nt!WdipSemEnableScenario+1da (+0x03)
[ 0f b7:00 00 ]
82bc1242-82bc124a 9 bytes - nt!WdipSemEnableScenario+1dd (+0x03)
[ 66 85 c0 75 16 8d 41 40:00 00 00 00 00 00 00 00 ]
82bc124c-82bc1251 6 bytes - nt!WdipSemEnableScenario+1e7 (+0x0a)
[ 74 0f 66 83 b9 86:00 00 00 00 00 00 ]
82bc1256-82bc1265 16 bytes - nt!WdipSemEnableScenario+1f1 (+0x0a)
[ 75 05 e8 6c 22 e7 ff 8b:00 00 00 00 00 00 00 00 ]
82bc1267-82bc1274 14 bytes - nt!WdipSemEnableScenario+202 (+0x11)
[ 90 90 90 90 90 8b ff 55:00 00 00 00 00 00 00 00 ]
82bc1277-82bc127a 4 bytes - nt!WdipSemActivateInstance+b (+0x10)
[ 66 ff 88 84:00 00 00 00 ]
82bc127e-82bc128a 13 bytes - nt!WdipSemActivateInstance+12 (+0x07)
[ 56 57 be 7c b5 b4 82 8b:00 00 00 00 00 00 00 00 ]
82bc128c-82bc129a 15 bytes - nt!WdipSemActivateInstance+20 (+0x0e)
[ 73 07 8b ce e8 91 c8 ed:00 00 00 00 00 00 00 00 ]
82bc129c-82bc12d1 54 bytes - nt!WdipSemActivateInstance+30 (+0x10)
[ 8b 0d 7c b5 b4 82 8b c1:00 00 00 00 00 00 00 00 ]
82bc12d4-82bc12d6 3 bytes - nt!WdipSemActivateInstance+68 (+0x38)
[ 8d 81 84:00 00 00 ]
82bc12da-82bc12db 2 bytes - nt!WdipSemActivateInstance+6e (+0x06)
[ 66 ff:00 00 ]
82bc12dd-82bc12de 2 bytes - nt!WdipSemActivateInstance+71 (+0x03)
[ 0f b7:00 00 ]
82bc12e0-82bc12e8 9 bytes - nt!WdipSemActivateInstance+74 (+0x03)
[ 66 85 c0 75 16 8d 41 40:00 00 00 00 00 00 00 00 ]
82bc12ea-82bc12ef 6 bytes - nt!WdipSemActivateInstance+7e (+0x0a)
[ 74 0f 66 83 b9 86:00 00 00 00 00 00 ]
82bc12f4-82bc12ff 12 bytes - nt!WdipSemActivateInstance+88 (+0x0a)
[ 75 05 e8 ce 21 e7 ff 5f:00 00 00 00 00 00 00 00 ]
82bc1301-82bc1318 24 bytes - nt!WdipSemActivateInstance+95 (+0x0d)
[ 90 90 90 90 90 8b ff 55:00 00 00 00 00 00 00 00 ]
82bc131a-82bc131c 3 bytes - nt!WdipSemEnableContextProviders+14 (+0x19)
[ 83 7e 28:00 00 00 ]
WARNING: !chkimg output was truncated to 50 lines. Invoke !chkimg without '-lo [num_lines]' to view entire output.
3749 errors : !nt (82bc1001-82bc1fff)

MODULE_NAME: memory_corruption

IMAGE_NAME: memory_corruption

FOLLOWUP_NAME: memory_corruption

DEBUG_FLR_IMAGE_TIMESTAMP: 0

MEMORY_CORRUPTOR: LARGE_4096

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE_4096

BUCKET_ID: MEMORY_CORRUPTION_LARGE_4096

Followup: memory_corruption

Read other 3 answers
RELEVANCY SCORE 65.2

When I come to work I dock my laptop, lid closed, press the power button on the dock and after a few seconds I'm ready to work. When I leave for home I undock and put in my bag. It takes me an hour to reach home during which time the laptop is in my bag, not being used. When I get home it is hot since it didn't go into sleep. At home when I leave it for a while, it goes to sleep (plugged is 15 minutes or unplugged 30 minutes) 1. Why won't it go to sleep after I undock?2. Why won't it go to sleep after an idle timeout wake timers are disabled when unplugged and powercfg -requets shows an empty list. How do I fix this situation? I know I can undock, open the lid (wait for it to come on), then close again, but this is tedious and a lot of times I'm in a hurry and forget. 

Read other answers
RELEVANCY SCORE 64.4

Hello folks.... I have a Lenovo W540 which has a simple problem that is frustrating me to no end. Whenever I undock the laptop, or bring it out sleep, the screen remains blank. I end having to put it back in the dock (or RDP to it), which allows me to view the screen content on the external monitors. I have updated all the drivers using the Lenovo driver app, and even applied the docking driver update. Nothing seems to help. I've searched the forums, but all that I have found is a suggestion to downgrade the video driver, which I dont really want to do. Anybody else have this issue? Any ideas? Thank you!! //EDIT to add that this is Windows 8.1. Important information   

A:W540 - Blank screen after undocking/sleep

Exact same problem here. It looks like the only way to brink the device's lcd back is to boot the machine. Then it will work until the next time it falls a sleep while docked.I'm running Windows 8.1 with latests drivers.

Read other 9 answers
RELEVANCY SCORE 63.2

Hi all,

I just put together a new computer this weekend. Specs are below. It appeared to be fine when gaming and browsing the internet. However it soon started to BSOD. It would do this when loading Youtube. I traced this to an apparent problem between ATI drivers and Flash. Changing Youtube to HTML5 seemed to fix it.

I'm not happy with that, but I suppose it's livable. However it still BSOD's if I leave it alone for a while and then come back and try and wake it from sleep. I've attached log files as requested. Any help is appreciated. Thanks

G.SKILL Ripjaws Series 4GB (2 x 2GB)
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz
HIS H695F2G2M Radeon HD 6950 2GB
ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s

A:BSOD coming out of sleep

  
Quote: Originally Posted by RLewis08


Hi all,

I just put together a new computer this weekend. Specs are below. It appeared to be fine when gaming and browsing the internet. However it soon started to BSOD. It would do this when loading Youtube. I traced this to an apparent problem between ATI drivers and Flash. Changing Youtube to HTML5 seemed to fix it.

I'm not happy with that, but I suppose it's livable. However it still BSOD's if I leave it alone for a while and then come back and try and wake it from sleep. I've attached log files as requested. Any help is appreciated. Thanks

G.SKILL Ripjaws Series 4GB (2 x 2GB)
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz
HIS H695F2G2M Radeon HD 6950 2GB
ASUS M4A87TD EVO AM3 AMD 870 SATA 6Gb/s


Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Read other 3 answers
RELEVANCY SCORE 63.2

I'm getting a BSOD when my W7 x64 Dell comes out of sleep mode. The errors are all over the place, but I'm thinking a driver -- just can't figure out which one. Hoping someone can help diagnose.

So far I have:
- Run memtest86 repeatedly with no errors found
- Run sfc /scannow 3 times with no issues reported
- Turned off hibernate
- *Tried* to clean up any old/unused drivers

Attached are the dump files.

Thanks for any/all assistance. This is driving me nuts.

A:BSOD when coming out of sleep

Hi rcferry,

Please check the link below for running the diagnostics on the Dell system which would isolate if there is any hardware issue:

How to Run the Dell 32-bit Diagnostics Utility

Also, let us know the model number for the system you have so we can provide you with any drivers that might require to be updated on the system.

Read other 9 answers
RELEVANCY SCORE 63.2

I keep getting BSoD when my computer comes out of sleep. This started after I did some over clocking. It's a x64 win7 OS on a top of the line system.

Thanks in advance!

A:BSoD when coming out of sleep

bump

Read other 9 answers
RELEVANCY SCORE 63.2

Whenever i come out of sleep mode i get a bsod, i have win 7 pro on a toshiba l350, any ideas their is nothing glaringly obvious in the windows device manager cheers for ur help

A:Bsod When coming out of sleep

drich290195,
Please follow these instructions:
http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 63.2

The windows system is less than a year old and it was a full retail pro 64bit windows 7 if you have any questions about the system feel free to ask.

A:BSOD coming off of sleep

Hey Mike and welcome!

Acronis
One of your dump contained a conflict on the Acronis True Image Snapshot Manager driver. It's either installed on the web, but it's also an extension in some Seagate Disk Wizards. If you have any chance to remove it that'll be cool.

DirectX
Your DirectX files are likely broken.
Update it here.

MemTest86+
Maybe- a memory corruption, test it with Memtest86+, and pay attention to part 3 in the tutorial.

Update Speedfan
Your Speedfan-driver is old and needs to be updated.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff800037c409c, Address of the instruction which caused the bugcheck
Arg3: fffff8800b184070, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
nt!ObReferenceObjectByHand... Read more

Read other 4 answers
RELEVANCY SCORE 63.2

This is the 2nd or 3rd time that I have had a BSOD when getting my system out of sleep mode.
When it happens there is no warning. Everything is starting up and loading so the system is bogged down; not very responsive. Other than that, there is nothing that would indicate the immanence of a BSOD.

I should mention I have a lot of processes loading up in the tray area. I just started removing some of these so that they don't automatically load upon startup.

It seems that this last time, my computer was in sleep mode but it must have restarted sometime during the night because when I brought it out of Sleep Mode it started loading processes, which it only does upon Startup from having been off.

I've uploaded an SF Diagnostic zip file.

Thanks in advance.

Terse

A:BSOD upon coming out of sleep.

Hi Terse.

The BSODs are caused by FiiO USB DAC-E17 audio device.
(c:\windows\system32\drivers\fiioe17.sys)

Code:
BugCheck FE, {4, fffffa800a640c60, fffffa800a640ba0, fffffa80070a8010}

*** WARNING: Unable to verify timestamp for FiioE17.sys
*** ERROR: Module load completed but symbols could not be loaded for FiioE17.sys

Probably caused by : FiioE17.sys ( FiioE17+1d21 )

Followup: MachineOwner
---------
And the driver is somehow old.

Code:
fffff880`06e66000 fffff880`06e73a80 FiioE17 T (no symbols)
Loaded symbol image file: FiioE17.sys
Image path: FiioE17.sys
Image name: FiioE17.sys
Timestamp: Mon Nov 26 11:34:54 2012 (50B30686)
CheckSum: 0001355F
ImageSize: 0000DA80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
So either update the driver (unfortunately I dont know the source, so I cannot suggest. Probably you know, as you use it) or remove the device, at least as a test.

Let us know the results.

Read other 3 answers
RELEVANCY SCORE 63.2

I recently did a clean install of Windows 7 Professional and EVERY time I put the computer to sleep it crashes with coming back. Any ideas on what it could be? I'm not completely computer illiterate, but I don't know much about finding error codes and what not. This is pretty annoying but at least I can just shut it down when I would normally put it to sleep. Thanks guys, Nick

A:BSOD when coming out of sleep!

Copy contents of C:\Windows\Minidump to another folder.

.rar them and attach to a post. We will have a look to see what is likely cause.

Read other 7 answers
RELEVANCY SCORE 62.4

Firstly some context. I had Windows 7 Pro that came with my laptop, upgraded to Windows 8 sometime last year after its release, but kept getting BSOD error when coming out of sleep/hibernate. After much effort on trying to fix, trying things I saw on these forums and other places, nothing helped, and after one too many crashes, I decided to use the restore feature that came with my laptop to restore to factory settings. I went back to Win7 Pro and had no problems, everything went fine. Recently I found my old Windows 8 installer disk and decided to try again, did a clean install, installed all updates to date, getting same error as before, BSOD Kernel Data Inpage Error on wake from sleep/hibernate EVERY time.
I ran sfc.exe /scannow, no issues
Used Windows Memory Diagnostic, no issues
Used Chkdsk, no issues (trying again just to be sure)
Used driver reviver to update all drivers, so everything should be in order on that end.
Dumps attached
Thanks for the help in advance

Attachment 54662

A:BSOD Coming out of sleep/hibernate

Hi Cero21 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Tue Dec 2 00:43:07.882 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\120114-33968-01.dmp]

Windows 8 Kernel Version 9600 MP (2 procs) Free x64

Built by: 9600.17328.amd64fre.winblue_r3.140827-1500

System Uptime: 0 days 1:24:03.855

*** WARNING: Unable to verify timestamp for atikmdag.sys

*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

*** WARNING: Unable to verify timestamp for atapi.sys

*** ERROR: Module load completed but symbols could not be loaded for atapi.sys

Probably caused by : atikmdag.sys ( atikmdag+c27920 )

BugCheck 7A, {fffff6fc003d8220, ffffffffc000000e, 3039d860, fffff8007b044920}
BugCheck Info: KERNEL_DATA_INPAGE_ERROR (7a)

Arguments:
Arg1: fffff6fc003d8220, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: 000000003039d860, current process (virtual address for lock type 3, or PTE)
Arg4: fffff8007b044920, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
DISK_HARDWARE_ERROR: There was error with disk hardware

BUGCHECK_STR: 0x7a_c000000e

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x7a_c000000e_atikmdag+c27920

BIOS Version F.49

BIOS Release Date ... Read more

Read other 7 answers
RELEVANCY SCORE 62.4

Hello All,
First timer here so bear with me. I have a friend's machine that was infected with various malware and trojans. Used R-kill, Malware Bytes, Avast, etc. to clean the machine, removed a bunch of programs not needed or questionable, and ran CCleaner to remove any unnecessary remnants of what was removed. The system is running fine now but gets BSOD after coming back from sleeping. I can manually go to sleep and wake the machine up without an issue but if it's asleep for a period it will occasionally BS. After pulling the dumps I can see that it was happening before I did anything as there was a dump from the same day I received the machine for repair, just a few hours prior. The issue I'm having is knowing where the issue lies. I cannot see it long enough to read the message. It disappears very quickly. Any help is appreciated.

The tutorial that I received and folder name differed so I couldn't follow it exactly. Zip should contain the files that are needed though.

Machine Specs:
HP Pavilion P2-1113w
Windows 7 Home Premium OA x64
AMD Chipset

Thank You!

Darren

A:BSOD Coming back from Sleep

Something is wrong with your Graphics Driver

DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed

When did you last update your graphics drivers?

Read other 3 answers
RELEVANCY SCORE 62.4

Hi there, have recently been suffering with BSOD errors when coming out of sleep mode, I think.






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF8000335D41F
BCP3: FFFFF880203647A0
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1


Have also attached my minidump file.


Any help would be much appreciated! Am usually alright with computers, although anything BSOD puts me into a state of shock!

EDIT - Apologies, after posting I noticed the banner about correct form for these threads. Have updated my attached file to be the one creating using the diagnostics tool.

A:BSOD When coming out of sleep mode.

All your bugchecks are the same (System service exceptions). These are generally caused by graphics drivers containing bugs or a faulty GPU.

I recommend running Driver Verifier to see if it picks anything up.
Follow these instructions.

Driver Verifier - Enable and Disable

I would recommend creating a restore point before enabling driver verifier, follow these instructions.

System Restore Point - Create


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8000335d41f, fffff880203647a0, 0}

Probably caused by : ntkrnlmp.exe ( nt!RtlCompareUnicodeString+b )

Followup: MachineOwner

Read other 3 answers
RELEVANCY SCORE 62.4

Bsod every time I wake up computer from sleep. Normal start up from full shutdown OK. Running UEFI bios. This problem started before bios update with fresh install on 8/18/2012. Ran memtest86 v 4.20 overnight, no errors.

A:bsod coming out of sleep new build with ssd & HD

Welcome aboard!

► You have Etron USB 3.0 Extensible Host Controller Driver installed, and it seems to be an older one. Check if there are some updates: Etron Technology Inc.

Code:
lmvm EtronXHCI
start end module name
94fc2000 94fd1b00 EtronXHCI T (no symbols)
Loaded symbol image file: EtronXHCI.sys
Image path: \SystemRoot\System32\Drivers\EtronXHCI.sys
Image name: EtronXHCI.sys
Timestamp: Tue Jul 26 03:00:42 2011 (4E2DE082)
CheckSum: 000131A9
ImageSize: 0000FB00
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e
► And, as it is USB relater, I would suggest you to turn USB selective suspense on.
USB Selective Suspend - Turn On or Off

► If there are any device connected with USB, please remove those and see if the situation changes or not.

Inform us what happened there

Read other 3 answers
RELEVANCY SCORE 62.4

I am using an IBM Thinkpad T40 with WinXP. My HP D145 Officejet All in one printer broke down so I had it replaced with an HP Photosmart 3100.

Problem is I get BSODs after finishing a print job and going to or returning from sleep, standby or hibernate modes. I never got BSODs when going to the mode after a scan, copy or fax job. I never encountered the same problem also with my old D145.

The MS Online Crash Analysis report says that the problem was caused by an unknown device driver.

I already tried to uninstall and reinstall the HP software. I also uninstalled my old printer drivers. I also followed HP's recommendation to close the HP software before going to sleep mode. There seems to be no updated driver from the HP website yet.

I have attached the minidumps I collected from the machine
 

A:BSOD when going and coming from sleep mode

Hello and welcome to Techspot.

All your minidumps crash at ino_fltr.sys. They all have a bugcheck of 9F.

0x0000009F: DRIVER_POWER_STATE_FAILURE

A driver is in an inconsistent or invalid power state. Typically occurs during events that involve power state transitions, such as shutting down, or moving into or out of standby or hibernate mode.

See HERE for further info about your stop message.

See HERE for more info.

Also, see HERE for a ino_fltr.sys driver update.

I haven`t come across this problem before, so I don`t know if the above will help.

Regards Howard :wave: :wave:
 

Read other 4 answers
RELEVANCY SCORE 62.4

Recently installed USB drivers for the front of the PC, which hadn't been working up until this point. HP also recommended installing an audio driver, so I did so. Ever since, when the desktop comes out of sleep, it slips into a BSOD.

Initially after sleep, windows comes up, then a few seconds later I lose all the icons and taskbar (seems like explorer crashes), and a few seconds after that, BSOD. It is 100% consistent. The BSOD never finishes doing a memory dump, it hangs at step 2: initializing disk for crash dump. Kernel memory dump is enabled, per these instructions.

I've run memtest86 and chkdsk on the C:\ and D:\ drives, they came back clean. I've also used system restore to before installing the drivers and the issue persisted. I've attached the zip file created by the dm log collector. The desktop is fairly new - purchased January of 2015 - and the computer isn't subject to heavy or all-day use.

My solution for now is to disable sleep, but if there's a way to identify the culprit, that'd be my preference.

A:BSOD shortly coming out of sleep

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Dont run any disc cleanup tool before you upload another zip.

Read other 8 answers
RELEVANCY SCORE 62.4

Okay, I've fought and fought on my own, and I can't solve this one.

The BSODs are all random, some of them are the same, but most of the time they are different.
The BSODs happen mostly when I come out of sleep mode, but not always. Also it will come out of sleep mode just fine 10 times, and then crash once.

Hardware:
G1.Sniper Z97
i7 --4770K 3.5
MSI N660 TF 2GD5/OC G-SYNC Support GeForce GTX 660 2GB 192-Bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support ...
2 - G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C10D-16GTX
2 - Intel 335 Series Jay Crest SSDSC2CT240A4K5 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD) (Running striped)
2 - Intel 335 Series Jay Crest SSDSC2CT240A4K5 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD) (Running striped)


SARAH-Fri_05_01_2015_114537_96.zip

A:BSOD when coming out of sleep / sometimes other random tim

Hi,
Use following links to download drivers, because *some* of your drivers do not match latest version numbers, some of your drivers are never than that currently offered by official download page.

So I'm just assuming you either use some driver download program or you gathered them by other means.

Gigabyte related drivers and BIOS update for Intel socket 1150
GIGABYTE - Motherboard - Socket 1150 - G1.Sniper Z97 (rev. 1.x)

Nvidia display driver has been *probably* caught few times corrupting memory:
NVIDIA DRIVERS GeForce Game Ready Driver for Grand Theft Auto V WHQL

Eset antivirus driver has been caught several times right before the crash reading from invalid memory addresses, therefore it deserves to be removed from system, at least while we track this issue down.

SonicWall VPN causes troubles if other drivers such as Windows built in VPN driver is present, therefore you can consider removing it temporary.

Note: Some driver setup files might not work if newer driver version is present, therefore present version needs to be removed first by using device manager.
Apply all of the above carefully, and share results or new dumps in case of new BSOD's.

Read other 4 answers
RELEVANCY SCORE 62.4
A:BSOD 2nd Day in a row. 1st coming from sleep mode, 2nd while alt tab.

Hi ShayTheRogue.

Update the wireless driver from Driver Downloads | Qualcomm Atheros, Inc.

Also Test your RAM modules for possible errors. How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
__________________________________

Code:
ffffd000`247d78b8 fffff801`8b3a28ecUnable to load image \SystemRoot\system32\DRIVERS\athwnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athwnx.sys
*** ERROR: Module load completed but symbols could not be loaded for athwnx.sys
athwnx+0x1258ec

Code:
BugCheck 24, {b500190637, ffffd000247d8318, ffffd000247d7b20, fffff8006a35bb9a}

Probably caused by : ntkrnlmp.exe ( nt!RtlSubtreePredecessor+12 )

Followup: MachineOwner
---------

Code:
BugCheck 4E, {2, e46a, 22fdff, 200}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+21f60 )

Followup: MachineOwner
---------

Read other 3 answers
RELEVANCY SCORE 62.4

Hello everyone, I have seen this topic in many threads but it seems everyone's problem is a little different. I just installed a Samsung SSD a few days ago and I am experiencing a BSOD when trying to come out of sleep. Other than that the system is amazingly fast and stable. I have checked all my drivers, ran a memory test, sfc/ scannow, chkdsk, and made sure I had the latest Samsung driver. Nothing has alleviated the issue. I also only have the OEM Windows 7 disk from Dell so I pretty sure I cannot do a repair.

Here is the report from bluescreenview:

041911-11169-01.dmp CRITICAL_OBJECT_TERMINATION 0x000000f4 00000000`00000003 fffffa80`05d01550 fffffa80`05d01830 ntoskrnl.exe ntoskrnl.exe+80640 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17514 (win7sp1_rtm.101119-1850) x64 2 15 7601 275,848

Any suggestions would be much appreciated.

Thanks!

A:Just Installed SSD. BSOD when coming from Sleep.

  
Quote: Originally Posted by 4 Gig


Hello everyone, I have seen this topic in many threads but it seems everyone's problem is a little different. I just installed a Samsung SSD a few days ago and I am experiencing a BSOD when trying to come out of sleep. Other than that the system is amazingly fast and stable. I have checked all my drivers, ran a memory test, sfc/ scannow, chkdsk, and made sure I had the latest Samsung driver. Nothing has alleviated the issue. I also only have the OEM Windows 7 disk from Dell so I pretty sure I cannot do a repair.

Here is the report from bluescreenview:

041911-11169-01.dmp CRITICAL_OBJECT_TERMINATION 0x000000f4 00000000`00000003 fffffa80`05d01550 fffffa80`05d01830 ntoskrnl.exe ntoskrnl.exe+80640 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17514 (win7sp1_rtm.101119-1850) x64 2 15 7601 275,848

Any suggestions would be much appreciated.

Thanks!



To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press... Read more

Read other 3 answers
RELEVANCY SCORE 62.4

Hi again,

I had various issues getting blue screened a couple of weeks ago and after receiving some help on here everything was fine. I've just come back from lunch to find that my computer blue screened when waking up from hibernation (not sure if that's even right, basically screen went black because I hadn't interacted for a while.)

Here's the minidump file: Zippyshare.com - 041015-3437-01.dmp

Not sure what could be causing this, nothing's changed on the computer driver-wise and it's had no problems doing the same thing in the past.

A:BSOD when coming out of sleep mode just now

Hi glacierd & Welcome to the forums ^_^,

I am extremely sorry for the delayed response . There are very few BSOD analysts. Do you still need help with your problem? If yes, then kindly reply back to this topic and I would reply within 48 hours. Also, I would be notified via email once you post.
-Pranav

Read other 3 answers
RELEVANCY SCORE 62.4

Once or twice a month when my computer comes out of sleep mode it freezes, when I manually restart, it restarts into a Blue Screen. Here is the error information:


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9088
BCP1: FFFFF88007CBB8C0
BCP2: FFFFF88007CBB8C4
BCP3: FFFFF88007CBB8C8
BCP4: FFFFF88007CBB8CC
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\072812-35131-01.dmp
C:\Users\Dan\AppData\Local\Temp\WER-85878-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I have attached the SF Diagnostic tool information.

Thank you for your help.

-Dan

A:BSOD when computer is coming out of sleep

Welcome
It appears to be your Intel driver
Go to their websit and update driver
Intel Matrix Storage Manager driver Description:Intel Matrix Storage Manager driver Company:Intel Corporation File size:Various

Read other 5 answers
RELEVANCY SCORE 62.4

I get BSOD when computer comes back from sleep mode. I attach the zip from the Diag Tool v4. Thanks for your work!

A:BSOD coming back from sleep.

Anyone please help?

Read other 4 answers
RELEVANCY SCORE 62.4

HI,

My system has been giving me BSOD's coming out of sleep mode ever since SP2 was installed. It does not happen every time, but probably 80% of the time. Crash analysis says that it has to do with either LVUSB64.sys or USBPORT.sys. I've tried installing all latest drivers, but no luck. Any answers to this problem would be greatly appreciated.

System: Windows Vista Ultimate x64; ASUS P5QC Mobo; Intel E8500 CPU; 8GB Crucial DDR2 800Mhz; GeForce 8800GTX video; ASUS Xonar DX sound;

A:Vista x64 BSOD coming out of sleep

all pointing to usb ports , how do you "wake" your pc from sleep? is it with keyboard/mouse? are the both usb?

have you tried uninstalling the drivers for them , let vista install its default drivers and see if it cures it

Read other 6 answers
RELEVANCY SCORE 62.4

Hi All

Please find attached the dump report and perfmon report.

I have experienced BSoD the past 4 days (3 times) all times it happened while coming out of sleep mode, but it does not happen all times the PC goes to sleep.

It's a new laptop, Windows 7 pro 32-bit, I had it since Jan 17 and crashes only started a few days ago. For now suspecting it has something to do with the sleep mode I have changed my power settings to avoid this state while plugged into AC.

I just want to discard any H/W issue since is a new computer and also discard S/W issues since I've been playing around installing basic S/W (Reflection X, winzip, mozilla, plugins, connectivity, media players, etc), nothing dramatic.

Hope this helps and I'll wait for your feedback, thanks!!

Dan

A:BSoD - while coming out of sleep mode?

The dmp(s) point to ntkrnlmp.exe as the probable cause. We know this is not the case, as these are core OS files, and will definitely not cause a BSOD. They are just the default files the debuggers blame when they can't see a better cause. You need to enable driver verifier to help pinpoint the faulty driver...

- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part). Upload the new .dmp files as they occur.

Try removing any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller w... Read more

Read other 4 answers
RELEVANCY SCORE 62.4

Hi, My Windows 7 Pro home built computer with an ASUS B150 motherboard and Intel Core i3 processor has been experiencing an intermittent problem recently when coming out of SLEEP mode. About one time out of 15, I get the BSOD and a message that states: DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATION. Then there is a lot of text and then a message at the bottom that says that a log file is being created. The text doesn't stay on the screen long enough to read very much of it before it disappears. Sometimes it just does a Restart operation,and sometimes I get the Safe Mode screen. The BSOD screen does not say where this log file is being created or what its name is. I'm not all that savvy with the OS, so if someone can tell me where I might find the file, I will locate it and post it here for anyone who may be able to help. Thanks in advance.

A:BSOD when coming out of SLEEP mode

How to receive help diagnosing Blue Screens and Windows crashes - http://www.bleepingcomputer.com/forums/topic176011.html
 
Louis

Read other 0 answers
RELEVANCY SCORE 62.4

Installed Win8 in early October. No problems until now. Now, when I come out of sleep mode, I see the lock screen, and split seconds later it crashes and reboots. So I installed the SDK and symbols and ran "dumpchk.exe -y c:\Symbols !analyze -v c:\temp\Memory.dmp" . I hope one of the geniuses on this board will be able to tell me which driver is not making nice with tcpip.sys

Thanks in advance for any help you can provide.

Atomax
Symbol search path is: c:\Symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16384.amd64fre.win8_rtm.120725-1247
Machine Name:
Kernel base = 0xfffff801`ad88b000 PsLoadedModuleList = 0xfffff801`adb55a60
Debug session time: Tue Nov 20 08:08:18.129 2012 (UTC + 2:00)
System Uptime: 0 days 1:15:52.962
Loading Kernel Symbols
...............................................................
................................................................
...........................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************************... Read more

A:BSoD coming out of sleep mode

Uninstall third party firewalls, vpn solutions, other virtual networking drivers, VMware, hypervisors, antivirus solutions, apple bonjour. Upgrade or use stock networking drivers.

I think I see VMware in there.

Read other 18 answers
RELEVANCY SCORE 62.4

I seem to be getting BSOD every time I come out of sleep mode with my new laptop (Asus G74SX-TH71). I put in an SSD did a clean install of Windows 7 Professional x64. I have disabled the bluetooth in device manager deliberately as I don't plan on using it.

A:BSOD after coming out of sleep mode

Kaspersky was implicated in your crashe{s}& is a frequent cause of BSOD's.

I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST.

http://support.kaspersky.com/downloa...vremover10.zip

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 62.4

Would you guys help me with this one?

I suspect it has something to do with Bluetooth, it seems to happen when my cellphone was connected before entering sleep state.

I hope I provided all necessary details inside this ZIP file.

Also, another seemingly unrelated issue, my laptop very rarely doesn't find a boot device. I even switched my pretty new HDD for a SSD but the problem remains. I understand that it leads to problems with my SATA interface or something, but maybe you guys have something else to say about that.

A:BSOD coming back from sleep

Dump blames 0x7F - see this thread: STOP 0x7F (UNEXPECTED_KERNEL_MODE_TRAP)

Code:
Event[831]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2011-03-02T16:29:25.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: mycelo-lg
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x00000008, 0x90303750, 0x00000000, 0x00000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: .
Please upload Memory.DMP from C:\Windows to a third-party site (such as Mediafire, Uppit).

Regards...
Dean

Read other 7 answers
RELEVANCY SCORE 62.4

When coming out of sleep mode the log in screen starts to come on and I get a loud buzzing from the hard drive then I get the blue screen this has happened 3 times this week. I do not have anything new.
win 7 64bit updated intel 2.66ghz

Read other answers
RELEVANCY SCORE 62.4

? OS - Windows 7
? x64
? Windows 7
? Retail
? Just bought
? 3 weeks
? I5-3317U
? INTEL HD Graphics 4000
? DELL Vostro 3360 Laptop

I should note that i've replaced the original HDD with Intel 520 Series SSD (Prior the windows installation.).
I have checked and i have the latest ssd firmware installed.

Any help will be highly appreciated!

A:BSOD When coming back from Sleep

Hi,

All of the attached DMP files are of the CRITICAL_OBJECT_TERMINATION (f4) bugcheck. This indicates that a process or thread critical to proper system operation has unexpectedly exited or been terminated.

Usual causes are a hardware problem with the boot drive, or a device driver has a bug or a critical service was stopped.


Quote:




? Just bought
? 3 weeks




Indicative of hardware failure for sure unless we have a device driver issue. To be 100% sure, enable Driver Verifier:

Driver Verifier:

Quote:




What is Driver Verifier?
Driver Verifier is included in Windows 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.
Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver by flagging it and causing your system to BSOD.
Before enabling Driver Verifier, it is recommended to create a System Restore Point:
Vista - START | type rstrui - create a restore point
Windows 7 - START | type create | select "Create a Restore Point"
How to enable Driver Verifier:
Start > type "verifier"... Read more

Read other 3 answers
RELEVANCY SCORE 62.4

I've brought a brand new Samsung NP700Z3C and when I put it to sleep, (Samsungs sleep hybrid mode) it crashes, not all the time but definitely if left for more than a few hours.

the first crash came up with 0x0000003b bug error (USBPORT.SYS) and the 2nd time it came up with 0x1000007e (ntoskrnl.exe)

I've updated all the drivers I know possible, and not sure what to do next.

I guess I could solve my problems by not letting my laptop sleep but its a pretty cool feature which I would like to use.

I have included the debugging info you require.

Thanks in advance.

A:BSOD coming out of sleep 0x0000003b

Software concerns:


Code:
Start Menu\Programs\AVG Public:Start Menu\Programs\AVG Public
Start Menu\Programs\Norton PC Checkup Public:Start Menu\Programs\Norton PC Checkup Public
Start Menu\Programs\Driver Detective Public:Start Menu\Programs\Driver Detective Public
What are things like Driver Detective and Norton PC check up doing on your computer?
Suggest you to get rid of them right away! (I see you have revo uninstaller installed,
try uninstalling those two programs with revo uninstaller)


Please uninstall AVG (it contributes in BSoDs). Download and install MSE.
Run a full scan once updated:
Microsoft Security Essentials - Free Antivirus for Windows

For additional security, go with the free version of Malware Bytes:
Malwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computer (Run a full scan with this as well)

Run the system file checker to repair any damaged files within windows:
SFC /SCANNOW Command - System File Checker

Run disk check to make sure your hard drive is healthy:
Disk Check

Additional suggestion:

Run memtest on all your ram sticks individually for 8 passes (overnight preferable)
RAM - Test with Memtest86+

Seeing driver detective on your PC I suspect of virus/malwares on your hard drive
so run a full scan Windows Defender Offline and remove all it finds:
Windows Defender Offline

For the USB BSoD... Go through:
USB Driver - General F... Read more

Read other 9 answers
RELEVANCY SCORE 61.6

I built this win7 machine last year on an msi p55-gd80 motherboard with an i5-750 cpu. It would sleep fine and come out of sleep fine. Then I upgraded to a gigabyte Z68MA-D2H-B3 motherboard with an i7-2600k cpu. In doing the upgrade, all I did was boot the new hardware using the old hard drive, and then ran the new motherboard install dvd. Everything worked from the get go just as it had on the old machine, with one exception. Now, when coming out of sleep, I usually get a bsod. I assume this is driver related, but am not sure how to proceed as device manager looks fine and apart from coming out of sleep, the machine is perfect. Any advice is appreciated.

A:bsod coming out of sleep (used to work, but no longer)

Coming out of sleep blue screens are typically due to things that have to turn on upon waking from sleep mode. The main component that usually causes these is the wireless or network card. Try doing a full uninstall of your network adapter devices through device manager Start Menu -> Right click Computer/My Computer -> Manage -> Device Manager (from the list on the left) -> Expand Network Adapters -> Right click each and click Uninstall (do not hit OK yet when the dialog pops up after clicking Uninstall...) -> delete the driver software for the device when prompted to hit OK for the uninstall -> restart your computer after uninstalling all devices under Network Adapters. Install the latest driver for each after restarting the computer.

If the above does not resolve the issue, please follow http://www.sevenforums.com/crashes-d...tructions.html so we can have more information to help you troubleshoot the problem.

Read other 9 answers
RELEVANCY SCORE 61.6

I've been using Windows 7 on my laptop for over a year now with little to no problems, decide to finally take the dive into Windows 8. The installation runs smoothly, and everything seems perfect up until I tried to come out of sleep mode. Whenever I try to come out of either sleep or Hibernate it starts to awaken then I get the BSOD, stating "Your PC ran into a problem it couldn't handle, and now it needs to restart "
After following the instructions to search "Kernel_Data_Inpage_Error", and finding answers that didn't work for me, I'm here now, months later, sad, tired and in need of this being fixed

TL;DR
Switched to Windows 8 (then to 8.1) from 7, BSOD when coming out of sleep/hibernate. Please help

A:BSOD when coming out of Sleep/Hibernate after upgrade to 8

No memory dumps in the uploaded reports, please do this:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows S... Read more

Read other 9 answers
RELEVANCY SCORE 61.6

So my computer has had no issues for a very long time now. But about two days ago I wanted to try the new game, Lords of the Fallen. So I couldn't get game running at first so I tried fiddling around with my registry a bit, which did nothing. I eventually updated all my AMD drivers & software to the newest versions (14.9.2) and the game works fine. I have not run into any issues with starting my computer or any crashes while the computer is running. However, anytime I bring the computer out of sleep, instead of booting into Windows, I get a BSOD error 0x0000003B pointing to dxgkrnl.exe. I have since tried reverting my registry changes, and uninstalling all of my AMD drivers + re installing to no avail. I am attaching a DM Collector report, if anybody thinks they could help me narrow down the issues I would greatly appreciate it!

A:BSOD error 0x0000003B when coming out of sleep

Hi lazerpickle.

Uninstall your installed latest version of the display driver.
How-To Uninstall AMD Catalyst Drivers From A Windows Based System
Then clean up any possible leftover.
Drivers - Clean Left over Files after Uninstalling
Then install version 13.12 WHQL only. AMD Catalyst 13.12 WHQL Download
Let us know for any BSOD with this particular driver installed.

Read other 3 answers
RELEVANCY SCORE 61.6

So I've been having this problem for about a week or so now. I bought my laptop first week of May. It came with Win 7 Home and my dad gave me Win 7 Pro x64 so I installed it and it wiped my system including drivers so I had to reinstall all of my hardware drivers from the Dell CD that came with the laptop. It all started either when I tried to get Bluetooth working on my laptop (which I pretty much gave up on, because nothing worked despite the stupid laptop 'supposedly' having it built-in) or when I was trying to get my PS3 controller to work with my laptop. I ended up deleting all instances of Bluetooth anything from my laptop and connecting my controller by USB. I leave this + my wireless USB mouse connected while it's sleeping btw.

For the past few days, whenever I put my laptop to sleep, I'll wake it back up, and for maybe a good 10 minutes, I'll get the sound that there's a device somewhere continuously disconnecting (not even reconnecting), then I'll get a blue screen. This morning while this was happening I went into the device manager and saw that the Microsoft Wifi Miniport Adapter (#1 and #2) both had yellow exclamation marks on them. So I uninstalled them, restarted, reinstalled them, disabled them, and turned off the hosted server (I think it's called?) through some instructions I found online from someone who was having a similar problem. So I do all this, put the laptop in hibernation, wake it up, all seems fine. I put it to sleep, wake it up, but lo and behol... Read more

A:BSOD minutes after coming back from sleep

Anything? It just happened again 10 minutes after I came back from dinner. -_-

Read other 1 answers
RELEVANCY SCORE 61.6

I am not sure what is causing this issue on my dads laptop. He only uses it for work with email and excel mostly. He surf's the internet but nothing malicious as far as I can see.

I'm trying to talk to him about running the Windows 7 forums diagnostic tool. He doesn't seem to be able to grasp what I am asking him to do. Is it possible if I was able to get him to send me the .dmp files from his harddrive to mine and have them uploaded that way for someone to help me out?

A:BSOD while coming out of sleep mode BCCode 9f

Hello Rosco, if you can post it following the Blue Screen of Death (BSOD) Posting Instructions, we will be able to help you

Read other 1 answers
RELEVANCY SCORE 61.6

? OS - Windows 10
? x64 ?
? original installed OS: Win7
? original OS is full retail version (YOU purchased it from retailer)?
? Approximate age of system is 7 years (Some upgrades since)
? Approximate age of OS installation: 2 years for Win7, upgrade to Win10 about 6 months ago
? Have you re-installed the OS? Yes

? CPU: Intel Core 2 Quad Q6600 Kentsfield Quad-Core 2.4 GHz LGA 775 BX80562Q6600 Processor
? Video Card: Geforce 9800 GTX
? MotherBoard: ASUS P5Q Pro
? Power Supply - OCZ StealthXStream OCZ700SXS 700W

? System Manufacturer: Custom Build
? Exact model number: N/A

Desktop
=====================================

OK, my computer blue screens when it comes out of SLEEP mode. It is not every time, probably 1 out of every 7 or 8 times. But it is always coming out of sleep mode (not hibernate mode). The bluescreen references file: NVLDDMKM.SYS which is a driver file for my video card. I have updated the driver to Version: 341.95 WHQL, Release Date: 2016.3.16, Operating System: Windows 10 64-bit and I still have the problem. The upgrade to Win10 did nothing to solve the problem.
I have been dealing with this issue for well over a year and it is getting annoying. I have run the sysnativeBSODCollector app and attached the .zip file. When I run the perfmon /report it says it will take 60 seconds, but nothing happens. I let it run for an hour and nothing happened. The File/Save As is grayed out even after an hour.

Read other answers
RELEVANCY SCORE 61.2

So i have a new computer only bought a few months ago and ive gotten the BSOD several times coming out of standby mode or even if i just set it down any harder than a feather falling. Sometimes it happens sometimes its just fine, i have no idea what the problem is i just knw BSOD is bad... attached are all my crash reports please help this is only annoying as long as it isnt a serious threat to my files.

A:BSOD coming out of sleep or standby mode or just by setting down

Welcome

Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

From one dump file I can say that your Synaptic Touch Pad Driver is causing BSoDs.
The other dumps are not that helpful. So please upload your msinfo file and look for possible driver update on the Synaptic Touch Pad Driver.


Code:
BugCheck D1, {fffffa7fd3d35bbc, 7, 0, fffff88003041a3b}

Unable to load image \SystemRoot\system32\DRIVERS\SynTP.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
Probably caused by : SynTP.sys ( SynTP+3a3b )

Followup: MachineOwner
---------

0: kd> lmvm SynTP
start end module name
fffff880`0303e000 fffff880`031a6000 SynTP T (no symbols)
Loaded symbol image file: SynTP.sys
Image path: \SystemRoot\system32\DRIVERS\SynTP.sys
Image name: SynTP.sys
Timestamp: Sat Jul 16 03:44:41 2011 (4E20B4C9)
CheckSum: 0016C462
ImageSize: 00168000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Drivers | Synaptics | Driver Reference Table

... Read more

Read other 4 answers
RELEVANCY SCORE 61.2

Frequent but unpredictable BSOD when coming out of sleep.
Here is the error message. I also attach the dmp file
Please help, I have tried everything and don't know what cause this.

-
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 86F92120
BCP3: 86F9228C
BCP4: 83624D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\021012-29016-01.dmp
C:\Users\user\AppData\Local\Temp\WER-53976-0.sysdata.xml
 

A:Frequent BSOD coming out of sleep, need help analyze dmp file

"Frequent but unpredictable BSOD when coming out of sleep"...

CRITICAL_OBJECT_TERMINATION

This usually indicates a problem with a video driver or hard drive, but we can't rule out the memory until you test these components...

Please read and follow this info:
http://www.techspot.com/vb/topic51365.html
 

Read other 1 answers
RELEVANCY SCORE 61.2

I've brought a brand new Samsung NP700Z3C and it has a hybrid sleep mode, when it enters this state (by closing the lid) upon waking after a good few hours it will bluescreen, it has happened twice in two days, but it doesn't happen everytime, its quite hard to pinpoint exactly when it happens.

The first bluescreen came up with 0x0000003b bug error (USBPORT.SYS) and the 2nd bluescreen came up with 0x1000007e (ntoskrnl.exe)

I've updated all the drivers I know possible, and not sure what to do next.

I have included the two minidumps and a drivers list for you, if you require anything else please let me know.

Thanks

A:[SOLVED] BSOD coming out of sleep, error 0x0000003b

Is there anything plugged into the USB ports at the time like a USB portable hard drive?

Follow the instructions here> http://www.techsupportforum.com/foru...ta-452654.html
Lets see if the BSOD dump file(s) can tell us whats going on.

Read other 13 answers
RELEVANCY SCORE 61.2

I get random BSOD's and it happens most when dealing with logging in or starting up. And sometimes other moments.

I use a GT72 6QD Dominator G MSI notebook.MSI-Fri_11_03_2016_134400_28.zip

A:Random BSOD's - Usually at startup / login / Or coming from sleep etc

Do two things.
1. Clean boot. Clean Boot - Perform in Windows 10 to Troubleshoot Software Conflicts - Windows 10 Forums
2. Update windows to version 10586
See how it goes. Let us know.
____________________________________________________________________________

Code:
Windows 10 Kernel Version 10240 MP (8 procs) Free x64

Code:
BugCheck A, {8, 2, 0, fffff8034a4bd2d1}

Probably caused by : ntkrnlmp.exe ( nt!KiInsertTimerTable+b1 )

Followup: MachineOwner
---------

Read other 0 answers
RELEVANCY SCORE 61.2

Frequent BSOD coming of sleep mode in Windows 7

here is error message, attached is all dmp/SYSINFO xml/error message in txt file.
please help. This occurs frequently but not all the time. Don't know what to do.


-
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 86F92120
BCP3: 86F9228C
BCP4: 83624D60
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\021012-29016-01.dmp
C:\Users\user\AppData\Local\Temp\WER-53976-0.sysdata.xml
 

A:Frequent BSOD coming out of sleep, please help analyzing dmp file

Double post!
 

Read other 1 answers
RELEVANCY SCORE 61.2

Just got a new MSI laptop not long ago, recently starting having a few issues with BSOD's. They only occur, but consistently occur, when coming back from sleep mode, or resuming windows. Boot ups are fine, aside from rebooting after a crash...then it takes a couple of tries.I am not incredibly experienced with issues such as this, but I'll post what I know.

The BSOD's I am experiencing are as follows: MEMORY_MANAGEMENT, BAD_POOL_HEADER, PFN_LIST_CORRUPT, SYSTEM_SERVICE_EXCEPTION.

I've not run anything except Whocrashed to analyze anything, and it's result(albeit probably not accurate) was that no offending 3rd party drivers were found. The system runs completely fine doing heavy gaming, and as long as it never goes to sleep it never has any issues. Any leads at all or help finding leads would be greatly appreciated.

A:BSOD when resuming windows/coming out of sleep mode.

Apologies for the self bump, but I can no longer edit my post due to being after 15 minutes. Here's the upload.

Read other 2 answers
RELEVANCY SCORE 61.2

Hello,

I have a 3 month old Asus ROG G771 JM that began giving me increasingly frequent BSOD's (mostly DRIVER_POWER_STATE_FAILURE but a few with WHEA_UNCORRECTABLE_ERROR as well).

I use nVidia Inspector and Intel Extreme Tuning Utility to boost performance but only when gaming and doing some GIS stuff. Otherwise I return to stock values. I have stress tested my settings using 3DMark and RealBench to ensure stability and it was fine for some time. I noticed BSODs with and without the OC'd settings leaving me to believe this may not be the culprit.

Any help would be appreciated as the BSODs seem to be happening more often.

Thanks in advance.

HOUND-2015-11-24_174522_07.zip

A:BSOD-coming out of sleep/during video/other random times

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from your manufacturer ASUS. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.

Code:
4: kd> !irp ffffe00175c4c330
Irp is active with 6 stacks 4 is current (= 0xffffe00175c4c4d8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe0016ebea060 00000000 fffff801dbcfb37c-ffffd0007e4808f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe001744d21f0 00000000 fffff802095a2c0c-ffffe00176a6aea8 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00176a6aea8

Args: 00000000 00000000 00000000 00000000
4... Read more

Read other 8 answers
RELEVANCY SCORE 61.2

My win7 laptop (64bit, 128 SSD, Encrypted disk ) will randomly BSOD on several different driver files, this time ks.sys. I have several DMP examples and am providing one here now.

A:BSOD Issue when coming out of sleep on Win7 64 Bit laptop

  
Quote: Originally Posted by shorgan


My win7 laptop (64bit, 128 SSD, Encrypted disk ) will randomly BSOD on several different driver files, this time ks.sys. I have several DMP examples and am providing one here now.


Please give us more than one DMP

No DMP files included in upload please try this method
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.





Quote:
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropd... Read more

Read other 1 answers
RELEVANCY SCORE 61.2

I am getting a BSOD when coming out of sleep mode. I have attached the zip file with the information. I have researched the error code 0x000000f4 and from what I found it indicates a bad HDD/Boot loader. I tested the HDD and it passed. I tested RAM and it passed. I re installed the OS and it is still doing the same BSOD every time.

Any help or suggestions on this would be great, thanks everyone!

WAX

A:BSOD when coming out of sleep mode error 0x000000F4

Test the HDD using Seatools. Take both the short generic and the long generic test. SeaTools for DOS and Windows - How to Use
Let us know the results.
________________________________________

Code:
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

Read other 3 answers