Over 1 million tech questions and answers.

Error code oxc000000d acer aspire R14 error code o...

Q: Error code oxc000000d acer aspire R14 error code o...

Boot configuration data file is missing some required informationFile BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.

Go to Solution.

Preferred Solution: Error code oxc000000d acer aspire R14 error code o...

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

Read other 3 answers

I need help I have an Acer aspire with windows xp and I get this message:
File \minint\system32\kdcom.DLL could not be loaddd the error code is 4
Set up cannot continue.press any key to continue
Please tell me this can be fixed

A:Acer aspire error code 4

Hi, is your Acer Aspire pc one that has a DVD/CD drive?
Did this happen when you where trying to restore to factory settings?
Do you have the Xp install Cd?

Read other 7 answers

IFO file missing? Not a clue to what this means: error code 204. This happened while burning a user back-up disk.

A:Acer Aspire 8920G error code 204

This happened while burning a user back-up disk.http://en.wikipedia.org/wiki/IFO don't know if this wil help.what program are you using to burn? does it give an option to burn slower?

Read other 4 answers

i've done everything i can to get things back to normal. bootable usb won't work. pressing the windows key to get uefi firmware settings doesn't work. just at my wits end

Read other answers

i've done everything i can to get things back to normal. bootable usb won't work. pressing the windows key to get uefi firmware settings doesn't work. just at my wits en

A:error code 0x0000034 no my acer aspire switch 10

When does the error show up? Which OS do you have installed? Did you install some other software just before the issue started? Is there more text shown than the error number?

Read other 1 answers

i've done everything i can to get things back to normal. bootable usb won't work. pressing the windows key to get uefi firmware settings doesn't work. just at my wits en

Read other answers

I've booted from the DVD-Drive and when the CD tries to load the setup of Windows 8, a blue screen comes out including this text:


There was a problem with a device connected to your PC

An unexpected I/O error has occurred.

Error code: 0xc00000e9

This problem can happen when a removable storage device is removed while it's in use or is failing. Properly connecting any removable storage and restarting your PC may fix this problem
Pres Enter to try again
Press F8 for Startup Settings

I don't have any USB devices on my laptop to remove/connect properly, also tried the F8 button but it sends me to the same message.

I would really appreciate any help

A:Trying to Format/Install my Acer Aspire 5349 - Error code: 0xc00000e9

Do you have a device you could connect to a usb port? Maybe by connecting a valid usb device to the right port (the port that the laptop thinks is corrupted), the system will reconcile what it thinks is wrong. Try each port in succession. Just a thought.
I'm also answering this because i saw you had no replies and you were probably getting frustrated like me.

Read other 2 answers

Hi Everyone,

First post here, allow me to thank you in advance for your good help - people like me who have limited information on diagnostics and repair owe a deep debt of gratitude for your service.

I own an Acer Aspire V5-571P-6815, which has put up the Recovery blue screen of death, citing Boot Configuration Data file is missing some required information. It also cites File:\BCD, Error Code 0xc0000034. It says I'll need to use the recovery tools ion my installation media or boot cd/USB device.

Thank you so much for any help you may be able to give me. I am ready to carry out instruction. I have my cell phone, iPad, and temporarily, another laptop with CD burner.

EDIT: I also have access to UEFI Firmware Settings with menu options. Thanks.



A:BSOD, error code 0xc0000034, Acer Aspire V5, "Recovery"

Wow, I didn't know topics were posted so quickly - I thought I had lost my post, but it turns out that it already ended up on the 2nd page...

So, I'm sorry to be bumping this, but I was just wondering if someone could get me started in the right direction? I would greatly appreciate it.

Thank you,


Read other 6 answers

I have an Acer Aspire Laptop that I am getting very frustrated with. Any help with this issue would be greatly appreciated. My son had this laptop origianlly and got so frustrated he just stuck in the top of his closet for a few years. Now I'm needing
a computer and he gave me the laptop. I have researched and done so many different things I'm ready to pull my hair out. I decided to make sure everything was backed up and ran the eRecovery Program on here from Acer back to the Factory Default settings. I
have uninstalled the McAfee Security Suite and added VIPRE Antivirus Home. I also uninstalled Bing Bar (I have no use for it), newsXpresso (no use for it), Norton Online Backup, Times Reader. I tried to do a manual update for Windows and I'm still getting
that error code. Please help.

Read other answers

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

Read other answers

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers

Hello, After upgrading WIN8 to 8.1, i've installed intel drivers v10.18.10.3304 found in Acer download drivers page, and the HD4000 is in code 43 >> no brightness support, slide show for video playing ... Etc ... So, I reinstall post version rivers ( - for Win 8), brighness work, but wmp crash, dxdiag too ...  Have you solution ?? Thank you.

A:Aspire P3-171 / W8.1 / HD4000 error code 43

Upgrading your P3-171 to Windows 8.1 can cause the symptoms you described. This can be resolved by updating your BIOS to the latest version. Please view our article Aspire P3-131 and P3-171 update to Windows 8.1. After you update the BIOS update to the latest Windows 8.1 drivers for your system.

Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

Read other 9 answers

Hello, After upgrading WIN8 to 8.1, i've installed intel drivers v10.18.10.3304 found in Acer download drivers page, and the HD4000 is in code 43 >> no brightness support, slide show for video playing ... Etc ... So, I reinstall post version rivers ( - for Win 8), brighness work, but wmp crash, dxdiag too ...  Have you solution ?? Thank you.

A:Aspire P3-171 / W8.1 / HD4000 error code 43

Upgrading your P3-171 to Windows 8.1 can cause the symptoms you described. This can be resolved by updating your BIOS to the latest version. Please view our article Aspire P3-131 and P3-171 update to Windows 8.1. After you update the BIOS update to the latest Windows 8.1 drivers for your system.

Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

Read other 9 answers

Hello, I have one acer e1-571 running windows 8 on it.Recently, when I want to turn on my laptop, I faced the blue screen with error code : 0x0000185.I searched here and other websites, that I need boot disk and recovery disk(s) to repair.I ordered them directly from acer, and they send me: 1 system disk, 3 recovery disks and 1 language disk.I tried to recover my system by starting booting my laptop by system disk. After system booted by system disk and choosing the language, I reached to a page for recovery with 3 options: restore operating system to factory default, completely restore computer to factory defaults and EXIT. BUT, my problem is I can not choose the 2 first options for restoring and I can just choose exit (as you can see in attached picture). Is there any suggestion(s) what's wrong with it or did I have any wrong steps. Best Regards.

Read other answers

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers

I have an Acer Aspire One running XP and I've gotten some sort of virus that no scanner would seem to help. I've tried resetting it to factory settings by pressing Alt F10 but then I get the error that said

minit\system32\kdcom.dll was missing and gave an error code of 4.

I really need to get this thing reformatted back to factory. can anyone help me please? ​

A:Acer Aspireone error code 4 from resetting

Can you boot at all in safe or normal mode.

Do you have the recovery discs or a copy of Windows XP.

Read other 3 answers

First, I am new to this forum and look forward to seeking answers to my computer issues!
So I will "Thank You" ahead of time for your time and help.

Okay..my issue...

I am on an Acer T671 desktop computer. Originally it came with Vista. I am trying to downgrade to XP but I am not having a smooth transition.
I ended up taking the hard drive out of the system and sticking it into an external enclosure to format the drive.

I then took it out of the external enclosure and back into the desktop. I fired up the system and slapped the XP cd into the cd-rom tray...starting going through the process and up came the following error......

" Setupdd.sys could not be loaded. Error code 7. "

I'm hoping I can get some help with this issue.

Thanks again!

A:Setupdd.sys could not be loaded Error code 7 on Acer T671

Hello KorruptKranium

I think that error means incompatible or corrupt hardware.
Did you have any problems before this install?

Disconnect all USB devices and remove all cards except the video card and try again.

If that does not help test the RAM
If you have more than one stick of RAM (256MB or more) swap them over or take one out and try again with only stick #1. If it does not help or makes things worse swap the sticks and try again with only stick #2. Running with one stick at a time will identify if you have a bad stick. Try moving the RAM to a different slot as well.

You can put either of these free programs on a floppy and test the RAM. Let them run for hours to do many passes if you can


Windows Memory Diagnostic http://oca.microsoft.com/en/windiag.asp

Memtest on CD ( this is a bootable CD and can be used when you cannot access an operating system)

Use your CD burner to write it onto a CD as an ISO image
Test with only one stick of RAM installed at a time


Read other 3 answers

i have an acer 5517 laptop the i have a problem when booting i have restored the default boot settings, tried the alt+f10, and also a few other random thing and have not gotten very far a fixing it.
i get one of two screen

regular boot

alt+f10 boot

i dont have a recovery cd. i have tried to order one from acer once before, but they had an error in the ordering system they never charged me or shipped my recovery disc.

i currently have an extra hard drive i scavenged from an acer 5515 with vista. i system restored and installed new drivers on to make sure the laptop its self has no problems

i have access to 3 other computers if that would help me
one xp, one vista, and one is 7

using my desktop ( XP based) i hooked up the hard drive via the second sata connections and could see all the partitions are on the origanal hard drive with windows 7

I need to figure out a way to recover the os to a working condition i need no data off the hard drive. please help as i try to be as specific and detailed as possible to help you help me.
also thank you in advance!!!!

A:acer error code 0xc000000f need to restore from partition

woke up half asleep this mourning and thought i was pounding the f10 but accidentally hit f11 the first few times. it started up in recovery mode. it is currently applying system settings after the restore so finger crossed it worked this time. its been down quite awhile.

Read other 2 answers
A:Acer laptop won't start up. Error code 0xc000000f

You can read about that error code at the webpage links here:



Read other 1 answers

Hi guys,

I recently bought an Acer T230H touch screen monitor. I connected it all up as normal as well as the USB port on the monitor which plugs into any USB on my comp to handle the touch screen capabilities. When I started up, Windows downloaded the driver for it but it doesn't install it properly. It says "Device driver software was not successfully installed".

I go to device manager and it is listed under Human Interface Devices. The icon has the yellow exclaimation mark indicating that there is a problem. I've tried re-installing the driver. I have also uninstalled and then re-installed the USB devices. I have tried doing it all in Windows XP and the exact same problem occurs in that as well. When I look at the properties of the device. It says: This device cannot start. (Code 10)

The driver manufacturer looks to be Quanta Computers Inc. I have searched and searched everywhere for a different driver, but have no luck. I have downloaded a file from Acer for this monitor, but it is an .INF file listed in their driver section for this monitor, but it doesn't do anything and I'm not sure how to use it.

Can anyone help?


A:Acer T230H monitor - Driver code 10 error...

hi i have the t230h too and my usb is working very good.

but i have another question: when i turn the monitor off but leave it on the electricity it makes a sound when i go with my ear at his backside...

is it by yours too???
sry for my bad english...


Read other 9 answers

Hello Everyone,
I have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
Thanks for your time,

A:Windows 7/8 Acer Desktop, Boot error code 0xc0000225


Use your 8 install DVD or USB key:

MBR - Restore Windows 7 Master Boot Record - Windows 7 Help Forums

Read other 9 answers

Hi, My sisters laptop is not working correctly. It is fairly new, she got it about a month ago. It is an Acer laptop, model #: aspire 5570z, with Windows Vista Home Basic. processor: INtel T2060 @ 1.6GHz, ram: 502MB, and is 32-bit OS.
The problem is that the dvd disk drive is not showing up in my computer, this problem happened yesterday randomly. After seeing this i went to device manager and it showed up so i went to the properties of it, and it says:

windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.

So I tried this, and nothing happens, it just comes up with a box that says sending solution with a little loading bar, it loads, then it goes away.

A:acer laptop has problem loading dvdrom, (driver error: code 39)

Uninstall the driver, and then click Scan for hardware changes to reinstall or upgrade the driver.

Read other 6 answers


I have an Acer Travelmate 2702wlmi laptop that Blue screens at the xp loading screen on boot. It flashes up the BSOD so fast you cant see the error code generated.

I have rebuilt the laptop onto a new HDD, swapped the memory out and i still dont know if it's software or hardware causing it ( suspect hardware).

After the BSOD, the laptop reboots and just goes round in an endless circle. If i power it down and then up again i get the ntldr is missing message and can use a boot disc to get back i to it fine. Last night i used it for hours fine, and rebooted it several times, but early today turning it on caused all the issues again.

If i leave the battery out and run it off mains it makes no difference, checked the fans are running and it does not appear to be hot.
Any help would be appreciated, even if someone knows how to get the error code off the BSOD ( stop it flashing up)

regards Neal

A:Acer Travelmate 2700 Laptop BSOD's so fast , you cant see the error code

Are you able to press F8 and get to the Windows options screen?

Read other 3 answers

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code


Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


* *
* Bugcheck Analysis *
* *
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
2: kd> !analyze -v
* *
* Bugcheck Analysis *
* *
Driver Issues:


Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version

C... Read more

Read other 9 answers

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).


Go to Solution.


Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault

Read other 4 answers

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.


A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

Read other 1 answers

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.

Read other 9 answers

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.

The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.

I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

A:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
You do need to resolve those Other devices category issues.

Read other 1 answers

Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt

Regards, Boopathi

Read other answers

Just got this result. What does this mean??Thanks!

Read other answers

So today I worked on my laptop, I opened it up because the USB 3.0 ports got disconnected somehow. I fixed that, put it back together, and upon booting it up my graphics drivers are no longer functioning. The computer recognizes them, but they are in a perpetual cycle of error code 43. This laptop comes with an AMD APU with Radeon graphics. The specific combo is Radeon 7600m+7660g. The error says "Windows has stopped this device because it has reported problems." on both graphics drivers, which are for some reason separate entities on the device manager.. which they never used to be.

I have tried the following and still get the error.
-100% clean uninstall(registry and folders included) of the drivers, and reinstall of drivers from both ATI and the Laptop manufacturer.
-Took apart laptop again to assure I havent accidentally unplugged something..I am 100% sure I have not.
-Restored PC to 2 days prior to event
-Enough fidgeting with device manager to throw up.

I have never had an issue like this. I am really good at solving driver related issues but I am truly stumped. Ive spent 8 hours trying to get it to work, since I need the video functional for class this Friday. If anyone has any clue as to what is going on, please help.

Again, the laptop is Acer Aspire v3-551g x419

DxDiag attatched.

A:Acer Aspire v3-551g x419 Graphics Drivers (Code 43).

I would open the laptop back up and start looking at all the physical connections of all the hardware. Sure sounds like something was knocked loose.

Read other 1 answers

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7

Read other answers

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

A:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
Hope this helps

Read other 1 answers

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

A:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

Read other 2 answers

The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:

Read other answers

my dell inspiron 1520 start give problems. after PSA diagnostic i have got error code 0146. message: error code 2000-0146. unit 1:dst log error. what does it means? what do i need to do next? many thanks

A:error code 0146, message error code 2000-0146

Had this same problem on Inspiron 1545.  Just wanted add what I did that seems to have solved the problem, I'll let u know if it stops working again.  Will be posting this elsewhere as well.
Got started on this link: 
I booted off the dell OS disk by pressing f12 at startup and selecting CD-rom/DVD. 
After files load, Click repair OS instead of Install. 
Click Command Prompt.  Type C:\   Hit Enter
Type in chkdsk     Hit Enter
After chkdsk runs, If you have the same problem I did, it will say unable to repair in read-only mode.
on C:\, Type chkdsk/r
It will prompt you that all handles will be invalid, type y and press enter.
chkdsk fixed my problem, Reboot by typing exit and press enter.  
Start Windows Normally.
Hope this helps, def post again if it happens again.

Read other 16 answers