Over 1 million tech questions and answers.

HP Elite Thunderbolt 3 65W Dock Replacement Cable

Q: HP Elite Thunderbolt 3 65W Dock Replacement Cable

I am trying to find a replacement Thunderbolt cable for my docking station, I have had no luck even finding the part number for the docking station let alone a part number for the cable. Please help if you can.Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Elite Thunderbolt 3 65W Dock Replacement Cable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 97.2

Hi, I have just received the HP Elite Thunderbolt 3 65W USB-C Dock. I have plugged it in, and my Elite X2 1012 G1 charges, but that is all. None of the ports are working. Monitor is not recognised either. If I plug my phone in via the USB port, it will charge, but not recognise it as a storage device. I have searched everywhere, and cannot find drivers that will resolve this issue. I have:- Thunderbolt software installed, and running, but still to no avail.- Installed and run "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver. Please help. ps. The machine was reimaged with a corporate SOE. So I am not sure if I am missing drivers. 

A:HP Elite Thunderbolt 3 65W USB-C Dock not working on Elite X...

I finally received our Thunderbolt 3 docks this week.  Same issues as OP.  I was able to get it working by installing the Intel Thunderbolt Secure Connect under the Driver - Controller section of the drivers for the X2 1012 tablet.  Hopefully this helps someone else.  Direct link to the driver page below. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741946&swItemId=ob_161921_1&swEnvOid=419...

Read other 6 answers
RELEVANCY SCORE 92.8

hello, we have a brand new spectre. first the device is amazing, i love it. but we have the following problem with the  HP Elite Thunderbold 3 65W Dock, if the Spectre is connected over Thunderbold Cable and on the Dock with Thunderbolt/Power combination cable connector, One 4.5mm power input every Device is working, Network is working, USB, both Display Ports are working, but the Spectre does not charge. i have installed the newest FIrmware Update  for the Thunderbold Dock Driver and i have updated BIOS, Intel Thunderbold Drivers on the Spectre. We have changed also the Thunderbolt 3 Dock with an new one, same problem.  one thing, on the front the light is off and i cannot turn on the spectre with the button.  any ideas, hints??? and yes i have connected the spectre over one of the 2 thunderbold ports, because the spectre has only 3 usb-c ports but 2 of them have thunderbold technology. i see also that the tb3 dock is recognized in windows at the thunderbold software.  kind regards, sebastian   

Read other answers
RELEVANCY SCORE 91.6

Unfortunately I still haven't resolved the issue with my laptop. It's rather frustrating because we have an identical laptop and hardware setup with one of my colleagues and his works fine. No combination of BIOS update software uninstall and reinstall has resolved this issue. It's a shame because I have been accustomed to using the docking station for my older Compaq based laptop / Workstation and I really do love the feature.

Read other answers
RELEVANCY SCORE 91.6

I have exactly this issue (exame same symptoms) with a G17.Happens even if there are no peripherals attached to the docket. Was on .09 of the BIOS, upgraded to latest, no change. Have updated all HP and Intel drivers and utilities. Also removed graphics drivers in safe mode and reinstalled clean, no change, and performed an sfc /scannow.Was working fine week before last, no idea what changed to cause this. 

Read other answers
RELEVANCY SCORE 91.6

Hi All Could really do with some help on this. We are gonig to be using the HP Elite Thunderbolt 3 Docking Station with our laptops. The issue I am finding at present is that you have to authorise for use on each laptop. This requires Admin Rights, something that we are no going to give our End Users. According to the manual located at: http://h10032.www1.hp.com/ctg/Manual/c05141189, on page 5, "Note: You must be logged on as an administrator on the computer connected to the dock. To enable a non-administrator user to select OK, enter the non-administrator registry key. Contact your HP Technical Consultant for this key." Does anybody have any idea what the key is? Kind Regards  

Read other answers
RELEVANCY SCORE 91.6

I recently (yesterday, 16/08/16) started experiencing the dreaded Blue Screen of Death whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock. The machine is a HP ZBook 15 G3. It has been connected to this dock for over a month without this issue. I'm not sure why the sudden issue as I don't recall any updates or new software prior to this happening. The dock is connected to 2x monitors via HDMI cables, and an ethernet cable. I connect a wireless mouse and keyboard to a USB3 port on the laptop. If the dock is connected to the laptop on startup, it reaches the login screen before BSOD. If I start without it connected, it will BSOD a few seconds after connecting the dock. It never gets to the point where the monitors display anything. It can boot with the dock connected in Safe Mode, as this seems to disable it from working. I have updated all drivers and the BIOS (including downloading the Softpaq Download Manager) but there has been no change. I've also updated the NVIDIA drivers to the latest version without change. What should I do next to solve the issue?

A:BSOD upon connection to HP Elite Thunderbolt 3 Dock

I would personally try isolating the culprit, then go from there: 1) remove 1 monitor from the dock, then test2) remove ethernet from the dock, then test3) remove the last monitor and hook it directly to the laptop, so the dock is attached with nothing to it, then test4) I have my dock set to "Always Connect" in the thunderbolt software, not sure if that helps any.

Read other 2 answers
RELEVANCY SCORE 90.8

Hi all, We bought about 10 HP X2 Elite 1012 G1 along with Thunderbolt Docking station. I setup the laptop then installed the drivers for Intel Management Engine and Thunderbolt dock. Updated the firmware for Intel chipset as well. Since we setup these laptops user complain about the dock not getting detected by laptop. No matter how many times they restart. I went through each laptop and observed the following issues: 1- When I open the Thunderbolt software, it shows multiple HP docks in the attached devices with cross sign (which means the device is disconnected). It seesm that the Thunderbolt software creates multiple entries of the same dock then fails to detect it 2- When the laptop goes to sleep mode, the dock gets disconnected and then it doesn't get detected at all, even after reboot.  So far the only fix is as below: (which worked 90% of the time) 1- Uninstall both Intel management Engine driver and Thunderbolt Secure connect driver2- Install both Intel management Engine driver and firmware + Thunderbolt Secure connect driver BUT, this can't be a proper fix because in a corporate environment we can't go through this every single time. It's a total waste of time/money for a corporate. On top of that, users get frustrated by this issue that is ahpenning constantly. HP PLEASE FIND A PROPER FIX. PLEASE ALLOCATE YOUR IT PROFESSIONALS AND DEVELOPERS TO DIG THROUGH THIS ISSUE. We bought more than $2m ... Read more

Read other answers
RELEVANCY SCORE 89.6

Hello I just bought a new HP Spectre X360 with a elite thunderbolt 3 65w dock. After installing all the drivers everything is working when i connect the laptop to the dock. But the only thing that i cannot get to work is the power button on the dock. It doesnt light up in any colour like it says in the manuel and when i press it, it does nothing. I went to search for thunderbolt options in the bios but it seems there are none there. I updated to the latest bios (f.11) btw. Hope someone can help me with a solution kind regards Jelle

Read other answers
RELEVANCY SCORE 86

Love the concept of the thunderbolt 3 dock, can't fathom how it was designed though.  On my zBook 15 G3, the power and thunderbolt ports are on the right side of the laptop.  The dock has the cable port on the left rear side, completely crossing over all the ports when you put the dock on a desk with the back facing away from  you.  Then they ship a cable that is barely long enough to put the dock directly behind the laptop and connect it.   Where do I buy a longer cable HP, please!

Read other answers
RELEVANCY SCORE 86

As the only docking solution available and moving from a more traditional dock, its less than suitable.  HP needs to make a longer cable and the end that connects to the laptop should be at a right angle.  The cable is so stiff and thick it takes nearly 4" to make the turn.  HP makes it impossible to find this out how long the cable is with out purchasing and at that point your stuck with it.  Hardly a customer satisfaction issue they should want to propigate!

Read other answers
RELEVANCY SCORE 84

The cable is broken, and I cannot find anywhere to buy just the cable.I cannot believe that I need to buy a new package (dock, cable etc,) when I just need the cable?

Read other answers
RELEVANCY SCORE 83.2

Hi, When I unplug the zDock Thunderbolt 3 cable from my laptop, it powers the dock off immediately and disconnects everything USB connected to it. Is this intended functionality? My others docks never lost power when I disconnected the laptop from the dock. When I plug the cable back in, everything lights up and powers on the dock like it should. I did read somewhere on the HP support site that this dock does not work pre-OS - is this what I am experiencing or does that mean something else? I'm really astonished that a dock that has AC power running to it MUST be connected to a laptop to work. Thanks,Glen

Read other answers
RELEVANCY SCORE 82.4

I have a Dell Thunderbolt Dock TB16 - 240W docking station for the XPS 15 9560. It comes with a 0.5m USB Type-C Thunderbolt cable. Is there a longer cable, such as a 1m cable available for the TB16?
The TB16 was shipped from Dell with an instruction booklet entitled "Thunderbolt 3 (USB Type-C) Dock Cable Installation Guide." The book has instructions on how to remove the shipped cable and replace it with some cable that is received as a separate shipment. Does anyone know the purpose for those instructions? 
I'd like to suggest that the above questions would be a nice addition to the TB16 FAQ... adding some info on cable length, cable length restrictions, future plans for differing cable lengths, etc., might help users such as myself. I see others out there which have concerns about short cable length so that's why I think the answer to the above would make good TB16 support KB articles or FAQ entries. 
Thank you!

A:Dell Thunderbolt Dock TB16 Maximum Cable Length

The included instruction guide is just in case you need to remove the cable for replacement.
My cable is around .4 meters or 16 inches.  I do not know of other length cables are available.

Read other 1 answers
RELEVANCY SCORE 65.2

To back up Dell-Brian B's threads you can find all the available Dell documents for the Dell Dock and Dell Thunderbolt Dock here. 
TB

Read other answers
RELEVANCY SCORE 64

Hi @ all, i have a Elte x2 1012 Tablet and the Thunderbolt 3 Dock 65 W (P5Q54AA) and i want to install over PXE a new customized Windows OS. The BIOS and the Dock have the latest BIOS Version (Elite X2 - v1.14).But i cannot boot over PXE. The PXE Option is not visible in the BIOS under the UEFI Boot Order/Legacy Boot Order.The Network (PXE) Boot is marked.12 sec. push the Power Button - the same behavior. What to do? please help.

Read other answers
RELEVANCY SCORE 63.6

I've an Elite Thunderbolt 3 Dock connected to my ZBook, everithing is working except for the Ethernet network adapter.In device manager it appears under Other devices as "Ethernet Controller"  with a problem icon. Location: PCI bus 66, device 0, function 0The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element. I've searched on hp support for a driver but I couldn't find any, there is only the "ASMedia eXtensible Host Controller (xHCI) Driver". Any solution?Which driver I can use?

Read other answers
RELEVANCY SCORE 63.2

HP ZBook Dock with Thunderbolt 3 usb device issues. USB Keyboard randomly sends a stream of a repeated character.  I will be typing and mid worrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr d will get results like in the word above.  The inverse happens alot too, were it just drops a few characters i have typed. USB Mouse lag is horrible. Both devices will stop functioning, need to reboot the dock to recover them. Any one have any suggestions or which drivers are the most stable?

A:thunderbolt dock

#HPExpertDayYou will have to update BIOS/Firmware if any. Install the docking station drivers. Try using a different keyboard, if the issue stops then issue was with keyboard.http://support.hp.com/us-en/document/bph07165

Read other 5 answers
RELEVANCY SCORE 62.4

We recently started using Bitlocker with a PIN at startup. On all our laptops using the "old"-type dock, that you click your laptop into everything is working fine, the users put the laptops into the dock, turn it on, type in the Bitlocker PIN using the external monitor and keyboard, and then processed into Windows. Our problem is with everyone using the new Lenovo ThinkPad Thunderbolt 3 Dock. When the users connect the laptops to the dock using the cable and then power on from the dock, the laptop will power on (the LED in the ThinkPad logo lights up) but the monitors and keyboard connected to the dock is not working, and then after some time the laptop will power off again. We currently use a workaround where the users power on, type in the Bitlocker PIN and login to Windows before connecting the laptop to the dock, but this not a proper solution. We have Enabled both "Thunderbolt(TM) device" and "USB device" under "Support in Pre Boot Environment" in the "Thunderbolt 3"-menu in BIOS, but it still doesn't work. Have anyone else experienced this problem? Or does anyone know of a proper solution.

Read other answers
RELEVANCY SCORE 62.4

I have a new P51, 64 GB ram, SSD hard drive. Ihave a docking station at work and one at home. The one at home has a 6 TB Seagate BarraCuda pro USB3 drive attached. When I dock the laptop at home, the system will not boot. It gets to the bios boot sceen and stays there until I turn off or disconnect the USB drive. Once I do that, it continues to boot and if I turn the USB drive back on, it works fine. If the drive is my old 1 TB barracuda, it boots normally.  

Read other answers
RELEVANCY SCORE 62.4

For some reason, i can't turn on my new P51 using the power button on the Thunderbolt 3 dock.   I'm sure i've got something hooked up wrong, but thought i'd check here.   Is there a setting in Control Panel (power button) that i need to change?  In order to use my laptop / view from my external monitor, i have to open the lid to the laptop, power on and then i can use the external monitor.  thanks for any help. 

Read other answers
RELEVANCY SCORE 62.4

https://support.lenovo.com/us/en/solutions/acc100356 Hello I have the new X1 carbon laptop (5th gen).  I also have two 24 in thinkview external monitors with hdmi/display port inputs. If I buy the above adapter will I be able to run the two external monitors in extended mode so I have can have three different screens  total (laptop screen, monitor_1, monitor_2)?  

Read other answers
RELEVANCY SCORE 62.4

I have a Yoga 370 (Win10) and a Thunderbolt 3 dock & Thinkpad USB-C dock and i cannot get them to play nice. I am using the USB-C cord on both devices, it transmits video and power but not USB or Ethernet. I have downloaded drivers and firmware from Lenovo and still no luck, the computer does not see the dock BUT the video and power are there. I changed my BIOS settings per the firm ware update well and no luck. any help would be much appreciated!

Read other answers
RELEVANCY SCORE 62.4

Is the new ThinkPad Thunderbolt 3 Dock compatible with P50? Dock details page (https://pcsupport.lenovo.com/cz/en/solutions/acc100356) only list P51s, but not P50. But P50 claims support for Thunderbold 3. If yes,  can I connect Ethernet LAN over the dock? And what driver I need to install?    

Read other answers
RELEVANCY SCORE 62.4

Hi allWell we all now about the fan issue which is much better since the last BIOS update.Nevertheless I have sometimes fluctuation fan noise, although there is no load. This is mainly when the notebook is at the thunderbolt docking station.I found out, that as soon as I connect my notebook to the docking station more or less all app-processes suddenly move over and start running on the GPU. The CPU has virtually no load.Why do all processes start to run on GPU when the notebook is connected to the dock? Is this an issue or is there a good reason for this behaviour?My Notebook and Windos has the latest drivers/bios and updates installed.Regards,Sebastian

Read other answers
RELEVANCY SCORE 62.4

Hello all,I bought a Yoga X1 2018 and during the shop they suggest the Lenovo Thunderbolt 3 Dock. Since I thought that having to disconnect only one cable when bringin the laptop from the desk to the meeting room would have been useful, I bought it.With my disappointment I setup everything and I did some tests on the laptop just to discover that the performance of the laptop when powered through the docking station are 1/3 with respect to when it's powered by the 65W power supply and 1/2 of when the laptop is on battery... (234pt vs 640pt vs 563pt | dock/65W/battery)Now since the docking station has a 135W power supply, I really can't think that this is an issue with the supply from the docking. Also since the laptop is even faster on battery I really don't understand how it could be related to the power supply... anyway I've connected both the 65W power supply and the docking and the performance are back to normal.Is there anyone who can suggest me what's going on or how to report this to Lenovo?

A:Thunderbolt 3 dock & Yoga X1 3rd gen

Hello,i have the same setup (X1 Yoga 3rd Gen + Thunderbolt Dock)  and dont experience less or different performance.I have 2 monitors with display port and couple of USB devices connected to the Dock. Also using 2 external and the Yoga monitor at the same time was never a problem.What tests have you done to measure the performance?best regards,AT

Read other 2 answers
RELEVANCY SCORE 62.4

I want to buy the Lenovo Yoga 920 (i7 with 16 GB) and I?m used to work with 3 external full HD Monitors. Since it has 2 Thunderbolt ports, it looks like the Thunderbolt 3 Dock may work with the 920. However, it is not listed on the compability list for the dock. Therefore: are the dock and the 920 working together?  

Read other answers
RELEVANCY SCORE 62.4

So I have a Precision 5510 laptop with Xeon processor, no 4K screen.  My question is about this thunderbolt dock TB16.  I have one HDMI out and was asked if I can make that work on 3 external monitors.  None are 4K.  Is that possible?  Can it function as extended desktop, not duplicated? And if so, is that 3 external plus laptop? Or is the laptop screen on of the 3? 

A:Thunderbolt Dock & 3 Monitors

Depends on resolution - see this article for more information:
www.dell.com/.../SLN301105

Read other 1 answers
RELEVANCY SCORE 62.4

I just picked up the TB3 dock and all seems to be working, however it is not charging my laptop using the included Thunderbolt/Power combo cable. The power light shows on the dock, and connected devices work on laptop, but no power. Any ideas?

Read other answers
RELEVANCY SCORE 62.4

I have a new ZBook G3 17" with ThunderBolt 3 dock station.I have install my laptop with boot up finger&password protection.I have connect display, keyboard and mouse to this dock.Every time  I bootup, I have to open laptop to insert access data.This look like a stupid solution compare the old HP docking station that I have on my HP 8760W where dockingstation are working from first second and I can insert my access data (password) without opening lid.There are any solution to this problem ?I have also another problem. On the old PC was possible create a protected area of HD using a little part of it withHP ProtectTools. This SW is not possible to install on ZBook G3.I don't found any solution to create it. Only using Windows 10 (that I don't want to use) functionality.More we go on and worst SW/HW are delivery to user. AC

Read other answers
RELEVANCY SCORE 62.4

Hi,I have a Thinkpad P50 and today my Dell Thunderbolt Dock arrived.Unfortunately, it doesn't work  (= it is not recognized in any way), although Dell specifically says that the dock also works with non-Dell Thunderbolt 3 machines. I have installed the Thunderbolt software from the P50's driver site and updated to BIOS 1.17.Lenovo released an "Intel Alpine Ridge Thunderbolt Firmware" for the P70. But there's no such firmware update on the P50's site, just the Intel Thunderbolt Software from November.The 1.17 UEFI/BIOS Update says it fixed a Thunderbolt issue, but apparently not mine Has anyone ever gotten some Thunderbolt 3 device working on the P50? I just hope this will be fixed soon, because the Thunderbolt dock seems to be the only convenient way to drive three 4K displays with the P50 (2 via Thunderbolt 3, 1 via miniDP).  

A:P50: Thunderbolt 3 dock not recognized

What's the model number of the dock?  Thanks!

Read other 9 answers
RELEVANCY SCORE 62.4

Hi,
I've seen that the Thunderbolt TB15 Dock is not valaible anymore in Italy due to hw problems. Do you know if a new one is arriving?
Thanks

Read other answers
RELEVANCY SCORE 61.6

Just got purchased the x1 carbon 5th gen along with the Thunderbolt 3 dock.  However, the dock will not charge the laptop.  Every time I get the error message "The dock is not supplying enough power to your computer.  Please use the ac power adapter that came with the dock".  I am, in fact, using the ac adapter that came with the docking station.  I have updated the bios as well as all of the other recommended updates and still get the same error message.  Does anyone have a solution?

Read other answers
RELEVANCY SCORE 61.6

With the issues of USB port enumeration apparently resolved, I've started rolling out zBook 15 G3s to our users.  I've discovered in doing so that the dock does not appear to support Wake-on-LAN.  Is there an option to enable this functionality or perhaps is this functionality on the roadmap to be added in a future firmare release? Thanks, Stan

Read other answers
RELEVANCY SCORE 61.6

I just installed the latest set of drivers. The dock still does not connect to my XPS 15- 9550.
This process has gone on for two months.

A:Thunderbolt TB15 Dock still not working

Return it. No amount of software/firmware updates is going to make this device good. It has several hardware issues.

Read other 3 answers
RELEVANCY SCORE 61.6

I recently bought a brand new X30-E-11D which works just fine and silently. Now, when I couple a Toshiba Thunderbolt 3 Dock with it (including 2 monitors, LAN and USB) the cpu load goes up and the laptop's fans start to run noisy. The whiole system seems to be under higher load. As soon as I disconnect the Dock the system recovers and the fans get silent again. Why is that. Can I do anything about it?

Read other answers
RELEVANCY SCORE 61.6

Hi, all. I have a problem thunderbolt is not charge notebook, but usb ports and displayport working.1. I connect the Laptop with the Thunderbolt connector on the backside of the Dock (beside the HDMI/DP connectors) and on the frontside, not working.2. I updated all drivers.3. I go into the BIOS and "disable the battery for technical service".But if I use an AC power adapter, it charges.Does anyone have a solution?

Read other answers
RELEVANCY SCORE 61.6

everybody.I'm trying to find the correct thunderbolt 3 dock station for my new Specter x360 . I noticed that HP has 2 dock stations offered for the Zbook. However, the wire from the dock station to the laptop is a dual USB-C & power jack.1. If I will buy a standalone thunderbolt cable, will it work with my Specter x360 and the Zbook dock ?2. I noticed there are 2 models of the Zbook dock : 150W and 200W . Which one should I get, if at all?Thanks for your help!

Read other answers
RELEVANCY SCORE 61.6

If I put my computer in "Sleep" mode and turn it back on, I can never get the dock to work again. I have tried to upgrade BIOS and drivers as described in several posts, but it doesn't work. The only working solution is to restart the computer. Has anyone got the same problem?

Read other answers
RELEVANCY SCORE 61.6

Hey There We have bought 15 Studio G3s and docks to go with them We have ran into issues with about 40% of the docks. Not sure if its the docks or laptops causing the issues. One laptop tries 3 diffrent docks, USB and Ethernet wont work. Another laptop will randomly BSOD, if the dock is even touched it will BSOD as well. I've gone though all the posts about these issues from last summer but nothing really seems to help. Is there a newer fix that I am missing somewhere? Thanks Josh 

Read other answers
RELEVANCY SCORE 61.6

I have a HP Zbook Thunderbolt 3 Dock, 150W (part number p5q58aa#aba).  It is connected to an HP Zbook Studio G3 running an intel core i7-6700HQ CPU. I have two HP EliteDisplay E231i displays connected to the display port ports on the dock, and am also using the Zbook's own display.   Intermittently, the displays will go black for a few minutes then turn back on.  Also, intermittently the dock will seem to disconnect and I loose my displays as well as the ethernet on the dock.  When this occurs I must restart to restore dock functionality. I have the latest driver (ASMedia eXtensible Host Controller (xHCI) Driver 1.16.38.1 Rev.A) and firmware (ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock 131025.10.11.23 Rev.A). Any tips as to how I can get more consistent performance out of this dock?  It is kind ruining the experience of an otherwise fantastic notebook.

Read other answers
RELEVANCY SCORE 61.6

Does anyone know if Thunderbolt docks work with Linux on the T470? If so, which ones? I'm currently using the Lenovo dock that plugs into the bottom of the machine; running a monitor and a bunch of USB stuff off of it.

Read other answers
RELEVANCY SCORE 61.6

Hi.  Hoping that someone can provide a little guidance, and show me where I must be doing something wrong. T480 (20L5 model) running Windows 10 1709 (Core i5, 8th Gen Intel)Thunderbolt 3 Dock (40AC model)Installed Thunderbolt Software is:  17.3.74.400System BIOS is:  1.12BIOS Thunderbol setting:  Security Level - No Security When I connect the dock to the laptop via Thunderbolt 3 connector, the laptop DOES draw power.  So I know that it basically works.What it does not do is anything else.  Connecting ethernet, usb keyboard and mouse, or even VGA monitor has no results. Des anyone have any suggestions about what I might be doing wrong here?  Other settings to check?  Or am I possibly dealing with a faulty component? Thanks in advance for any suggestions. Chris

Read other answers
RELEVANCY SCORE 61.6

Hey,  Hopefully someone can help.  I am using an X1 Carbon 6th Gen plugged into a Thunderbolt dock using two external displays.  When I plug in the dock, I find that my Microsoft programs are blurring. If I close and restart the programs they are fine.  Any advice? 

Read other answers