Over 1 million tech questions and answers.

Black Screen after installing new Graphics card

Q: Black Screen after installing new Graphics card

I deleted all of my old ATI graphics card drivers, and even used a 3rd party tool to whipe out the traces in safe mode after. I then installed my new nvidea GeForce 9800 GTX+ graphics card. I installed the drivers as well as active X.

During my first gaming session with the new card, it randomly cut to a black screen and the fan started to spin at a pretty high rate. (Fan on graphics card)

Anyone have any clue what I can do here?


(First time posting by the way, so be gentle)

RELEVANCY SCORE 200
Preferred Solution: Black Screen after installing new Graphics card

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Black Screen after installing new Graphics card

System Specs (MB, CPU, Memory, PSU, OS)?
Are you running two monitors?
Have you considered the possibility of adjusting the screen refresh rate?
Do you have anything overclocked?
Are you generating any minidumps?

More information would be helpful.
And I am sure someone here can help you track down the issue...

Read other 1 answers
RELEVANCY SCORE 88

Hey I'm not sure where to start but a while ago I bought a desktop and a monitor and they are

Desk Top:
Newegg.com - Acer Aspire AX1420-UR10P (PT.SG9P2.003) Desktop PC Athlon II X4 645(3.1GHz) 4GB DDR3 500GB HDD Capacity NVIDIA GeForce 6150 SE Windows 7 Home Premium 64-Bit

Monitor
newegg.com/Product/Product.aspx?Item=N82E16824009256

But the graphics card that came with the computer sucked, it simply doesn't support 3D games.

So I went ahead and bought this graphics card:

Graphics Card:
Newegg.com - GIGABYTE GV-N520SL-1GI GeForce GT 520 (Fermi) 1GB 64-bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Ready Video Card

Here note that the maximum power my computer has is 220W but the graphics card needs at least 300W for it to run

So I bought this power supply unit:

Power Supply:
Newegg.com - Antec VP-450 450W ATX 12V v2.3 Power Supply

Here's the story:

After I bought my computer and the monitor I bought the graphics card. It took me a while to figure out how to install it, but I worked my way out and installed it. So I followed the general guide to installing graphics card, remove driver first, install card, (the computer didn't have a card so the pci slots were empty) then I started my computer and tried to install the new driver with the disc that came with the graphics card. The first time it went so well that I thought it's gonna work, but after a while the screen suddenly goes back and on the top right corner it says "VGA then DVI... Read more

Read other answers
RELEVANCY SCORE 86.8

Okay i have a lenovo ideacentre K330B machine type 7747
cpu G630 2.7
6gb ram
integrated graphics intel hd 1000
i installed a cougar cmx 1000watt because i got a killer deal on it
and i install a gigabyte radeon 7950
i have tried everything i know that i can do for this i have tried looking into my bios and no option to for the pcie also tried booting into safe mode and disabling my integrated graphics through device manger i am having trouble finding a bios update for my motherboard but once i plug the power to my graphics card and try to boot up its just stays on a black screen and the its displays no signal but once i unplug the power my computers works as normal so i figured maybe i bought a messed up card put it in my buddys computer and boom works like a charm can someone please give me advice on something i can do without having to buy another motherboard..

A:Installing Graphics Card No signal just black screen

Use your intel HD 1000 and install the drivers for the card.

Read other 1 answers
RELEVANCY SCORE 71.6

I did a clean install of windows 7, then i installed firefox, avast and utorrent. I then downloaded the newest graphics drivers from nvidia, I have a GeForce 7300, and installed. After I rebooted the screen went completely black after the "starting windows..." screen. And the monitor goes into sleep mode displaying: "No signal input"

Anyone know how I can fix this?

A:Black screen after installing graphics drivers

Hi Muscar

Try SAFE MODE, press F8.

Read other 9 answers
RELEVANCY SCORE 71.6

Hey all,
having some graphics card problems and would appreciate any help.
I built two identical computers for my parents from spare parts and some new components just to give them something to use until they can buy something newer. Both work fine with the onboard graphics, but video play back performance is obviously low (very choppy). Trying to install an upgraded graphics card and does the same thing in both systems.

System specs:
Dell Optiplex GX260
Windows XP home, SP3
2.4GHz Pentium 4, 1GB ram
Onboard graphics is Intel 82845G

Graphics card I'm trying to install is a PNY VCG62256APG
This is a Nvidia Geforce 6200 card, ddr2 256 mb, 4/8x AGP interface
Should mention the card was new last winter and hasn't been installed in any other PC's.
When I install the card and boot up it shows the specs of the graphics card in the upper left corner. Goes through the normal bios and windows boot screens. Windows opens in a low res graphics mode, says found new hardware etc etc, loads nvidia driver from windows update and prompts a reboot. After the reboot it goes through the load screens again and shows the windows boot screen with the progress bar for about 15 seconds, then just goes black. Monitor says "no signal" and goes into stand by. If I restart in safe mode I get a signal back and can open windows but in low res of course. Tried updating driver with the newest one from nvidia's website and no go. Does the same thing. All other drivers on the... Read more

A:Black screen after installing graphics driver?

Did you get this fixed?
 

Read other 2 answers
RELEVANCY SCORE 70.8

As soon as I install Intel HD Graphics 4600 in my Dell Latitude E6540, the screen goes black and after rebooting, it goes black again right after Windows is booted.
Here is everything I tried:
clean installed Windows 7(original Dell USB drive recovery media)
clean installed Windows 10
install all Windows Updates and drivers from Windows Updates
Install latest drivers manually from dell.com 
Install latest (2017) drivers from intel.com

Screen works fine in Safe Mode and if I disable Intel HD Graphics 4600 in device manager, Windows boots normally and screen works. 

Bios version is A09 . 
I tried a bios update. In Windows mode, or Dos mode. the operation goes through: restart. but the update process is no longer running. go directly into the windows boot mode.

Read other answers
RELEVANCY SCORE 70.8

i am using HP g62-b60si , i am Having a serious issue in display drivers , Specs is Intel HD graphics(pentium) , Intel Driver is Working fine but after installing Amd or Ati driver black screen  error occurs cant able to log into windows , so i thought it is a OS problem so i formatted the whole system and reninstall it again the same problem arises.but  not solved

Read other answers
RELEVANCY SCORE 70.8

As soon as I install Intel HD Graphics 4600 in my Dell Precision M3800, the screen goes black and after rebooting, it goes black again right after Windows is booted.
Here is everything I tried:

clean installed Windows 8 (original Dell USB drive recovery media)
clean installed Windows 10
install all Windows Updates and drivers from Windows Updates
Install latest (2015) drivers manually from dell.com (M3800_Video_Driver_7C6X2_WN32_10.18.15.4248_A00.exe)
Install latest (2017) drivers from intel.com (Intel HD Graphics 4600 15.40 2017 win64_154036.4703.exe)
let Dell System Detect install drivers automatically
In Safe Mode, in Registry, set "DisplayOptimizations" to 0x0  and "NoFastLinkTrainingForeDP" to 0

RESULTS: all the same, screen goes black as soon as Intel HD Graphics 4600  is installed and remains black as soon as Windows is booted, no matter how many times you reboot.
NOTES:

I restored Windows from Advanced Startup Options each time screen would go black as a result of installing Intel HD Graphics driver, sometimes restore failed, and I clean installed Windows from USB media.
screen works fine in Safe Mode and if I disable Intel HD Graphics 4600 in device manager, Windows boots normally and screen works. 
I could live with builtin Microsoft Basic Display Adapter driver (1920x1080) but the the problem is screen brightness is stuck at maximum and there is no way to change it! 
I can use the laptop using TeamViewe... Read more

A:black screen after installing Intel HD Graphics 4600

Hi Beefesoft,Thanks for posting.Here is some information you may find helpful:  http://dell.to/2zcEQc0answers.microsoft.com/.../608bb6da-a88f-48d6-af45-ea490b1e2cbd

Read other 1 answers
RELEVANCY SCORE 70

I recently purchased a new graphics card(MSI Radeon HD6450) to hold out before I get my new laptop but whenever I start my computer with it in I get a black display.

Computer
Hp Pavilion p7-1287c

Procesor:
Intel core i5 2400, 3.1 GHz
Cores: 4

Motherboard:
Pegatron 2ac2

PSU:
EVGA 500W

RAM:
8 GB DDR3-1333

Form Factor:
ATX

Slots:
1 pci-e x16
 

A:Graphics Card Black Screen

Have you actually plugged your monitor into the card??
 

Read other 2 answers
RELEVANCY SCORE 70

I bought a Sapphire HD 7950 graphics card about 2 months ago. Everything worked fine until one day ago when I booted up my computer... everything booted up (Fans Lights & No system beeping) But I was only getting a black screen, with occasional small white flashes. I tried booting with multiple displays and multiple ports (nothing worked). I also tried changing my bios settings also with no luck. (the on-board graphics work fine when the graphics card is removed from the PC) My power supply is a 600W which is more than enough. Again Everything worked fine until that day. I doubt anything is damaged (I handle everything in my PC with extreme care). And yes all of the AMD drivers are installed. I will try to reply to any questions asap, I'm sorry if I don't reply quickly I have a very busy schedule . Any help on this issue would be VERY much appreciated! (Some PC Specs listed below)
Lenovo idea centre K450
600Watt new power supply
Intel® 4th Generation Core? i5
12gb system RAM
Not shure about the motherboard type
 

Read other answers
RELEVANCY SCORE 70

Hi everyone, this is my first post and i hope its in the right place!

Last night i turned on my computer for the first time that day, and all seemed fine; windows logo came up with the little loading bar, but instead if loading the desktop, up came a black screen. Funny thing was that windows was working in the background! I read through people having the same problem in these forums, and it turns out its not an overly uncommon problem; graphics card issue. I booted in safe mode, and uninstalled the graphics card and drivers, and when i rebooted it was fine, albiet in low resolution. i downloaded and reinstalled the drivers from my providers site, and when i rebooted i had the same problem. So now i am sitting typing this (the text looks huge on this resolution) and have a simple question. Is the issue here that the graphics card is broken? I hope this isnt the case as it is an onboard card and will cost about $900 for a replacement. My specs are below (i'm a bit of a gumby when it comes to computers so go easy on me

HP Pavillion zd8000 (lappy)
P4 3.2
Onboard Mobility Radeon X600 128MB
XP Pro
 

A:Graphics Card - Black Screen

Do you have the same black screen using an external monitor? If you do, you won't be spending $900 on an on-board video card, you will spend $900 on a new motherboard...

Have you tried to install the graphics driver once more?
 

Read other 5 answers
RELEVANCY SCORE 69.2

I just installed my new 7950, and upon installing the drivers then rebooting back to windows I found that although my screen resolution is listed at 1080p, either my screen or my graphics card isnt doing this properly because I have a black outline, about 2cm thick, all around my screen where the screen isnt displaying anything. Any suggestions? On the nvidia control panel I could stretch/move the screen size to my likings, is this possible with catalyst?

Thanks

A:New Graphics card causes black outline around screen

Ok First off I think you are Using a ATI Radeon card

Also if you installed Nvidia drivers on a ATI device GOD help you it even came on

Can you please do us all a favor and post screen shots of the card box and write down what drivers you installed

This would really help because the way i am reading this you are using a ATI card but you installed Nvidia drivers

7000 series card from Nvidia is Dinasour now

Read other 7 answers
RELEVANCY SCORE 69.2

I just swapped my graphics card this morning to a new asus nvidia GeForce gt630 when I installed the drivers off the cd after restarting the pc I realised the drivers did not support windows 8. It loaded up to a black screen an stopped, I have since been forced to try to restore and it is now stuck on black screen with blue windows logo with no indication it is doing anything I have restarted the pc and put the old graphics card back in, but it is still stuck on a restore, I bought downloaded windows 8 pro online so do not have it on a reboot cd.
Please help

A:Graphics card install black screen

I have now got it into safe mode ..

Read other 4 answers
RELEVANCY SCORE 69.2

I have a
Hp desktop
1gb memory
ATI radeon x200 intergrated graohics card
200gb hd
XP SP2
Pentium 4 3.06ghz

This is the problem

I got a used grapgics card- an ati x800xl 256mb. The I uninstalled my intergrated one through device manager. Turned off computer. Installed the new card to my PCI-E slot. Then connected the monitor cable to the new video card slot. Turn on computer and............nothing! Black sceen saying "No signal.

I researched this problem. Went to BIOS then switched cards or slots had a option like "PCI, PCI-E, AGP. Figuring that I installed it onto my PCI-E slot i switched it to that option. But still no start up.

I seems that the intergrated card never goes off. I uninstall it but its still there. Cause when I restart my computer its still enabled.
POWER SUPPLY is 300w of computer. Graphics card is recommended at 300w also


Question

How can I fix this problem so I can get the new card to work?

am I supposed to disable or uninstall the intergrated one? (I uninsatalled it first)

If I disable it and it still dosent work, the new card, can I reinable it cause I don't want to mess up the computer?

Thank you very much

google003
 

A:Black screen when I install graphics card

No video at all even when you first turn on the computer? You have to disable the integrated video through the bios, not the Device Manager
 

Read other 2 answers
RELEVANCY SCORE 69.2

i have just put in a graphics card (asus EN9800gt 512mb hybrid power) and wen i turn it on all i get is a black screen! what could the problem be?
I have a 500w pc and its a very brand new pc with 64bit windows 7 and intergrated grraphics.

also note that the first time i put it in i forgot to put in the 6pin adaptor and when i turned it on it made a big beeping noise. could this have stuffed up the card? becoz wen i remove it, the pc works fine

help please???
 

A:Put in graphics card but only black screen when turned on

Do you get any beeps after turning on your PC?

Also, what PSU do you have?
 

Read other 11 answers
RELEVANCY SCORE 69.2

Hi guys, I've done a fair bit of looking into this but I can't get a definitive answer. I recently bought a Gigabyte GeForce 750 TI OC Edition to go with my computer, knowing it would fit in the case. But ever since I've tried to install it, it has been a nightmare. It fires up, fans whirring and all but all I get is the HP BIOS screen, no imput commands and 3 quick beeps then it goes to an entirely black screen with a blinking underscore in the top left hand corner. From what I've read around I have to enable Legacy mode in BIOS, but since my computer is running the HP 7.07 BIOS I can't find that it even remotely supports Legacy mode. Then I've read that some HP MoBo's cannot effectively run a different graphics card due to age/restrictions. It doesn't sound like a power issue as I've already upgraded the PSU with no issues. I'd just love an answer to what exactly is the issue because it's driving me nuts and I'm pretty much ready to sell the card at this point. IF I have infact bought a non-applicablegraphics card, could you recommend one that would ACTUALLY work? Thanks again.

A:New graphics card shows black screen

The HP 3300 SFF shipped with Win 7, and a BIOS that is not upgradeable to UEFI standards.Look here at the new MSI cards that offer Legacy and UEFI.

Read other 1 answers
RELEVANCY SCORE 69.2

Im sorry to trouble you guys, but I have tried everything I can think of and have seen via google.

I tried starting my pc about 3 days ago and I got the windows loading screen up and then it all of sudden went black. To cut a long story short, my pc will not start with any nvidia drivers installed. I have tried a fresh reboot of the OS and all is good until I update the graphics driver.

I have tried re-seating the graphics card, and unplugging everything but it still isnt working.

Please could you advise on what to try next, or is my graphics card a gonner.

Thanks in advance
 

A:Graphics card and black screen on startup

Read other 9 answers
RELEVANCY SCORE 69.2

I recently built my new computer and have been having problems with the graphics card. My computer runs fine on my i5 graphics but I want better graphics so I purchased a Saphire Radeon 7850. When I plugged it into my motherboard and plugged in the power I then turned on the computer. Everything was working fine. The fans on the graphics card began to spin. and I could here windows being booted. The problem was the screen was black. Nothing was showing up and my monitor went on sleep mode. I turned off my computer and un-plugged in the power sorce of the graphics card and tried to turn on the computer and it worked fine. The monitor worked and everything was good. If anyone could help it would be greatly appriciated!
 

A:Black screen when graphics card plugged in

Did you plug the monitor cable into the back of the actual graphics card, or is it still in the motherboard port?
 

Read other 12 answers
RELEVANCY SCORE 69.2

Hello :) Today I bought a brand new Acer V3-772G laptop that runs Window 8 with a nvida gtx 760m graphics card built in.

Getting home I decided to use Just Cause 2's bench test to find out how the laptop would hold up. After completion and getting a rather low score I noticed it said the graphics card it was running was the integrated Intel(r) HD graphics 4600 card and not the nvidia.

So after some researching and trying out different ways with no results I right clicked on computer, clicked on manage, went to device manager then to display adapter, saw the intel card and the nvidia card so I disabled the intel card in hopes it would force the nvidia card to be used.

Once I did that all windows disappeared, the desktop was still there and I could still access the tile menu/start screen so I restarted hoping it would set everything back to normal and start using the nvidia card. Oh how wrong I was. Upon restart the acer title/logo pops up then disappears as usual but after that I only get black screen, nothing else.

Is there any way to fix this? To re enable the graphics card some how?
Thank you in advance!

A:Black screen after disabling graphics card Help!

If you could get to Safe Mode, you could re-enable the onboard graphics.

In some cases, if Windows 8 doesn't successfully start a few times in a row, it will display a screen with alternate boot options - among them an "Advanced Options" tab - which will include an option to start in Safe Mode. Try letting your laptop restart a few times. If it recognises a problem with the onboard graphics, it might produce the Advanced Startup Options menu.

If you don't see that menu appear, you can use a Windows 8 repair disc (USB, CD, or DVD) to boot your computer. It will produce a menu from which you can choose Advanced Startup Options & choose Safe Mode. The Wndows 8 repair disc is not your Windows 8 installation disk, nor is it a recovery disk (such as those provided by your manufacturer). The repair disc starts your computer into the Windows 8 Recovery Environment.

It only takes a minute or two to make the repair disc (literally). From a working Windows 8 PC, press the Windows & R keys at the same time. Then type recdisc. Choose create repair disc, & provide a blank CD, or blank DVD, or USB flash memory drive.
_________________________________________

Apparently, your laptop uses a hybrid type program called "Optimus" that uses both the onboard graphics as well as the discrete nVidia mini-card. The idea is that the onboard graphics handle mundane graphics tasks (to save battery life), and the nVidia kicks in when needed for g... Read more

Read other 4 answers
RELEVANCY SCORE 69.2

Graphics Card = Nvidia 6600
Computer = Shuttle XPC Barebone (SS56G v2)
Motherboard = Shuttle FS56 V2
OS = Windows XP SP2

Well I took apart my computer and put it back together about 3 times and after the third i turned it on and the screen was black straight away as soon as i pressed the ignition button. (the other times I turned it on it was fine).

I have determined that it is the graphics card because I plugged the monitor into the motherboard VGA port and it worked like normal. I have tried taking out the card and cleaning the port.

I went into Device Manager and under other devices it says: "VIDEO CONTROLLER (VGA COMPATIBLE)" but it has a exclaimation mark by it. And when i go into the properties of it it says: "THE DRIVERS FOR THIS DEVICE ARE NOT INSTALLED (CODE 28)". But i cannot install the drivers with the cd I have and i cannot use hardware update wizard.

My CD ussually identifies the card and the installs the drivers, but this has not happened and at the top where it says what the card is it says "NO SUITABLE DRIVERS".

I have had the same problem before but i didnt know what the problem was and I gave it to a shop to sort out so i dont know what exactly is wrong.

Can someone please tell me what to do?

Much Appreciated!!!!!!!!!!!!!!!!!

Agent
 

A:graphics card problem, Black screen

There should have been a cd with the graphics card, try that!!!
 

Read other 7 answers
RELEVANCY SCORE 69.2

Hi there,
I'm a bit of an amateur at this but I'm having a bit of a problem with my project computer it's an older Mac Pro 5,1 that I have upgraded the Ram, CPUs and also installed Windows 10 on to. Yesterday I was installing the drivers for my new graphics card when the computer crashed and the screen went black. So after a few minutes I decided to turn it off and on again however it powers on but is no longer displaying an image. I've tried swapping my old graphics card back in but it still has the same problem. Any ideas would be appreciated.
Thanks
 

Read other answers
RELEVANCY SCORE 69.2

Hello,
My dad has a nividia geforce graphics card in his computer and a 22 inch benq lcd monitor. Everynow and then when he starts the computer(its becoming more frequent every day),the computer screen is black and when you turn it on it says no signal.even some times when its left idle it does it.I'm guessing its a problem with the graphics card.Ive done all the obvious steps like clean the graphics card, make sure the screens plugged in and update the drivers.

Does anyone know what could cause this??

I will put the specs of dads computer up tomorrow

~Fastboy42~

A:Black Screen.Graphics Card Failure?

Make sure you update the graphic card drivers from the venders site, if you dont know then i can show you where.

Next click the link on my sig and do everything there then reboot. If the problem still exists then go into the bios and set the display to onboard graphics, boot then shutdown the pc and remove the graphics card. Then boot up and see if the problem still happens. If you need help with the BIOS settings then just ask.

NOTE: if you dont have onboard graphics you'll need another graphics card which you can put in instead of the one your using

If after doing all the above its still not working correctly then download http://www.cpuid.com/hwmonitor.php and run it then take a screenshot so we can see all the values and post it here

Read other 22 answers
RELEVANCY SCORE 69.2

I have a ATI/AMD Graphics Card on my Dell Studio 1558, and the chip has become faulty (design fault from manufacturer). Now the screen display is black and does not come on.

Temporary workaround I am using
I plugged in my separate VGA monitor to the laptop and using it, I switched on my laptop, and after the Windows startup logo, the computer would crash and restart (and repeat).

So I managed to get into Safe Mode, and from there, under Device Manager, I roll-backed my ATI/AMD driver to Microsoft Basic Display Adapter. Then I restarted the Laptop normally (not Safe Mode), and the laptop DID NOT crash, it made it to the logon screen and I got in.

Problem:

So now, I have my VGA Monitor plugged in to the laptop and using it, I am able to boot up windows normally.

While the laptop is on, if I unplug the monitor, the Laptop Screen stays black, nothing happens. When I plug it back in, I get this error that says Microsoft Basic Display Adapter is not compatible with your display (I'm assuming it means my laptop screen since it's a Full HD resolution, whereas my VGA monitor is half that resolution.

What I need help with

Is there any other driver I can install apart from ATI/AMD which will allow my Laptop Screen to work? I want to bypass the ATI/AMD Graphics card completely as it's faulty and maybe somehow use Windows one just like the Microsoft Basic Display Adapter is currently doing?

UPDATE: I do not mind using a smaller resolution on my Laptop Screen. I can learn to live... Read more

A:ATI/AMD Graphics Card error, black screen

I don't think a different driver would help with the laptop's screen. It sounds like a hardware problem, especially if, as you say, the chip has gone bad. It looks like the problem exists somewhere between the video card and the laptop screen, but it still allows you to use an external monitor.

You could boot without the external monitor and shine a light on the laptop's screen to see if there is anything there. If there is, that rules out the graphics card. It would be the actual screen backlight that is at fault.

Is there any chance that this laptop is still under warranty?

Read other 3 answers
RELEVANCY SCORE 69.2

i have just put in a graphics card (asus EN9800gt 512mb hybrid power) and wen i turn it on all i get is a black screen! what could the problem be?
I have a 500w pc and its a very brand new pc with 64bit windows 7 and intergrated grraphics.

also note that the first time i put it in i forgot to put in the 6pin adaptor and when i turned it on it made a big beeping noise. could this have stuffed up the card? becoz wen i remove it, the pc works fine

help please???

A:put in graphics card bt only black screen wen turn on!!

i think ive had this problem before. the beeping sound you heard was I believe the POST telling you that something is wrong with the graphics card. This is expected since you forgot to plug in the power. For me, it turned out that my power supply was a bust. Everything else turned on fine but there was never anything on the screen. Replaced the psu and everything booted up. See if you can find a replacement? Your wattage seems to be fine.

Read other 2 answers
RELEVANCY SCORE 68.8

Disk boot error please insert system disk and press enter

Hey everyone.

I just recently installed a rocketfish 500W ATX PSU and a GeForce 9800GTX+.
However, whenever I turn on the computer I don't get a signal for the monitor at all. I can't even boot into BIOS or anything, the monitor just stays blank. I've tried the old video card, but even that no longer works. My monitor is blank either way. I've triple checked all the connections, and everything is in place. I'm completely stumped.

I have Windows XP SP3 btw.

Now the video card fan won't even start. What the hell is going on?
edit: fixed all of that, see http://www.techspot.com/vb/post745719-11.html
 

A:Black screen after installing new PSU + Vid Card

gud day!
check the fan of your psu is it functioning? if not.. try testing it with another psu..!maybe your psu is faulty
 

Read other 13 answers
RELEVANCY SCORE 68.4

Hello, I've installed a nvidia geforce 8800 gt. When I boot in to safe mode. The computer boots fine, But when I go in to device manager, The graphics card isn't displayed, When I boot in to windows mode there is just a gray screen, No cursor. The mouse lights up and so does the keyboard.

------------------
System Information
------------------
Time of this report: 2/19/2012, 23:32:53
Machine name: ELISHA-PC
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: M68MT-D3
BIOS: Award Modular BIOS v6.00PG
Processor: AMD Athlon(tm) II X2 250 Processor (2 CPUs), ~3.0GHz
Memory: 4096MB RAM
Available OS Memory: 3326MB RAM
Page File: 1147MB used, 4067MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
 

A:Gray screen, After installing graphics card.

The "missing" graphics card in Safe Mode (Device Manager) is quite normal. In Safe Mode, Windows does not load any third-party device drivers which means the associated devices won't be listed in Device Manager (since in most cases the driver is where Windows gets the device information from).

The on-board graphics adapter (if there is one) is usually disabled automatically when a third-party graphics card is installed. This prevents resource-conflicts and odd behaviour. However, It's just possible that your on-board adapter is still enabled, causing the problems you describe. Go into the BIOS Setup and disable it if it isn't already disabled. Don't forget to save any changes you make to the BIOS settings.
 

Read other 2 answers
RELEVANCY SCORE 68.4

Hi, as the topic says, my screen isn't working after I put in a new graphics card. it was a Nvidia Geforce 9500, I put it in the correct slot, PCI or PCIe, and the screen doesn't even DETECT the computer now... the first time, I put it in poorly, the second it went in perfectly...but the screen still didn't work, I have been at this for 2 hours. Any help would be greatly appreciated.
 

A:Screen not working after installing new graphics card

Did you have a graphics card before the nVidia 9500? If so, did you uninstall the old display drivers.

Check if the Primary Display Adapter in BIOS is set to PCI-E.
 

Read other 4 answers
RELEVANCY SCORE 68.4

I have all working parts (already checked) I have had pc for 10 months and all of a sudden when I left the room my screen froze so I restarted my pc and it did not display. So I eventually identified the issue and I have been trying everything to get the graphics card to work but it still has a black screen PLEASE HELP ME IM DESPERATE
 

Read other answers
RELEVANCY SCORE 68.4

Im running Windows 7 dual monitor setup (BENQ BL2411). Which were working fine i replaced a faulty graphics card which was an Nvidia 520 GT 1 screen was connected via a DVI cable and the 2nd was connected via a VGA cable.
I changed the graphics card to an Nvidia 750Ti this does not have a VGA connection so i have bought a Displayport cable to use on 1 screen and mantained the DVI on the other.
I have checked that i have the latest driver for the card.
All im getting on the Displayport connected screen is a black screen.
When i go into the screen control panel the 2nd screen is being recognised.

Any Help would be much appreciated!

Thanks in advance

Read other answers
RELEVANCY SCORE 68.4

Hi,

I recently turned on my laptop for it to constantly arrive to a black screen just before I select the user login. I read some instructions on a different forum stating that I need to log in to the computer via the safe mode and un install my display driver which is Intel(R) HD Graphics, I did this which enabled me to get back onto my original login but at a price.

My driver now says that it's VGA, My screen resolution has changed, every app I use crashes constantly as well as any videos/films I play they crash, skip every minute or so.

Yet if I update the driver I end up back at square one, the black screen.

My laptop is an Acer Aspire 5742 with Windows 7.

I've also tried the windows recovery which crashes.
Any help would be much appreciated,

Craig

A:Black Screen death-Linked to Graphics Card!

Welcome to the forum.

Please fill in your computer specs on this link:
http://www.sevenforums.com/profile.php?do=extra

To know your system specs, just use speccy, download link below:
Download Speccy 1.17.340 - FileHippo.com

OR:
Click on the start | Search bar |
type System info

That shall show give you your system specs.

Then follow steps mentioned in this tutorial:
Troubleshooting Windows 7 Failure to Boot

This thread may also give you some information
Why is my screen black when I start Windows 7?

Post back on how far you get.

Read other 1 answers
RELEVANCY SCORE 68.4

My card runs fine without the drivers. With drivers installed, I get a black screen on Windows 7 after 20 seconds. Anyone know what this could be?

My onboard video runs just fine as well.

My card is an HIS Radeon 6950 HD.

A:AMD Graphics card gives black screen after updating drivers

try re installing the drivers first.

Read other 1 answers
RELEVANCY SCORE 68.4

http://support.hp.com/us-en/document/c03381888 (This is my pc) I just installed a new graphics card a PNY GTX 650 2bg and on start up it does 6 beeps and shows nothing on the screen. I have tried switching boot BIOS, then Best Buy(Geek squad) Tried scamming me into buying a new motherboard saying I shocked mine when I installed the card, but when I put my old card in it will start up normally even though it will crash all the time cause it's damaged. I have just been running around into loose ends and it's driving me insane to find an answer to my problem please help me.

A:6 beeps on start black screen new graphics card

Hi: if your PC came with W8, you need to change 2 BIOS settings when you install a non-HP video card. http://support.hp.com/us-en/document/c03653200 If it didn't then I don't know what the problem could be (other than a defective new video card).

Read other 8 answers
RELEVANCY SCORE 68.4

Currently running a radeon 6850 and decided to upgrade to the Nitro R9 380, when I took my old card out and replaced with the 380 I only get a black screen and the power save mode message on my monitor. I cant figure out the onboard graphics thing because my 6850 is the only thing I see under device manager and in advanced bios there is no setting to disable onboard graphics. I installed the drivers that came with the 380 off of the disc and that didnt help either ...anyone know what I am doing wrong? Baby step walk me through the process because Im somewhat a novice these days lol, my other graphics card continues to work when I plug it back in so its got to be a driver issue unless my motherboard cant handle the new card which I find unlikely

Read other answers
RELEVANCY SCORE 68.4

I have tried everything I know of to install an ati radeon 9200 pci video card into my dell dimension 3000. I have disabled the on board video card in the device manager, Also checked the bios setting which is auto. Everything I try I get a black screen at boot up. I have even put a new 500w power supply in thinking I didnt have enough power. I can hear windows start but the screen remains black. The video card is an ATI Radeon 9200 pci 256M. My system is
M5268 Processor, 80546, 3.0, 1M, Pentium4 Prescott Dt, 800, D0
1 7N242 Keyboard, 104 Key, UNITED STATES..., Silitek, LC, MIDNIGHT GRAY...
1 W1668 Kit, Mouse, PERSONAL SYSTEM 2..., 2 Button, Wheel, Logitech
2 J0201 Dual Inline Memory Module 256, 400M, 32X64 8K, 184
1 D3431 Kit, Speaker, 120V, NMB..., A215 Ship In Box
1 C3776 Modem, V.92, Data Fax, Internal PC Interface, Dell Americas Organization
1 N0785 Hard Drive, 80G, I, 7.2K, 80G/P HITACHI
1 M1210 Assembly, Floppy Drive, 212, 2
1 T7166 Kit, Software, WP-PRDCT-STE12 English, V2
1 H8412 Kit, Software, Overpack, WXPHSP2 Compact Diskette W/Documentation English
1 D7195 Assembly, Compact Disk Read Write, 48X, Half Height, Hitachi LG Data Storage, CHASSIS 2005...
1 D7195 Assembly, Compact Disk Read Write, 48X, Half Height, Hitachi LG Data Storage, CHASSIS 2005...
1 D8254 Display, Flat Panel Display, 15 Dual Voltage, E153fpf, DELL AMERICAS ORGANIZATION..., Flat Pannel In Box
Does anyone have any ideas, is the card even compatible?
 

A:Black screen when installing video card

The PCI video card may just be bad
 

Read other 7 answers
RELEVANCY SCORE 68.4

Hi,

Ive just built my first PC and I'm trying to install a new graphics card. The motherboard I have is a Gigabyte AMD 880G GA-880GM-UD2H with a built in graphics card which works perfectly fine when I load it up. However, I plan to use my PC for some gaming so I decided to buy a XFX Radeon 5850 1GB Graphics Card.

The trouble is when I fit this into my PCI-e slot and go to turn on my PC the screen stays black, I see absolutely nothing and there is no signal to my monitor. Everything powers up and all the fans start working including the one on the graphics card. Ive changed the BIOS so it boots video from the PCI over the on board graphics as well. I've tried researching online all I can but to no avail. Like I said this is my first build so I'm fairly new to all this and I have no idea what else I can do. I'd be extremely grateful to anyone who could help me with this, I'm pulling my hair out trying to get it working. Might my graphics card be faulty?
 

A:Black screen when installing new video card

Hi, i think is just some power issue to the card, or fine you may have changed to pci, but would suggest that you put it into AUTO mode so that the system can select the default display of its own, the other would be to make sure that the card is working fine, is it tested to meet standards or it those fake chinese cards, i would try it in another computer to be sure that its not bad.
Try all you can think off...
 

Read other 3 answers
RELEVANCY SCORE 67.6

Hello all,

I really hope someone can help me with this problem, since I have been spending already quite some time on this error. So here is the deal:

A friend of mine has quite a mediocre computer and he decided that he wants to play Company of Heroes (which is a game from 2008 I think). As expected, his old videocard wasnt good enough, so I helped him find a good graphics card in order to play this game ad perhaps also others. Its an older system so it has only a AGP slot.

So he bought a Sapphire HD3650 AGP. And because his old PSU didnt supply the power this card needs, I looked for an better PSU which he bought as well. But now comes the problem. The old drivers were deleted by using some driver sweeper program. After that, new ATI drivers were installed, but after this the system did not recognize the new videocard. If I went to device manager, the VGA onboard would be listed a screenadapter.

Apparantly, this is something that happens to more people, since ATI has a hotfix for this problem available, which I downloaded and installed. After the installation was complete, a reboot was required which I of course did. When rebooting, I got the blue screen for a short moment, just before one expects the windows log on screen to appear, after which it immidiatly reboots.

This keeps on happening. I am able to go in safemode. If I go to device manager and turn the graphicscard off (which is indeed recognized now), I can reboot normally.

Ok guys, now the question is of cou... Read more

A:Blue Screen after boot-up, after installing a new Graphics card

Nobody who has any suggestions?
 

Read other 1 answers
RELEVANCY SCORE 67.6

Hi, My father in law has problem with his z510 laptop. He has changed two things in BIOS.  He remember that he turn on securtiy boot and choose discrete GPU. After that screen is black. I've tried to help him with dissasembly parts and finding reset cmos but I didn't find it. Maybe someone can help me with that problems? Thanks in advance for any helpDariusz  

A:Black screen on z510 after bios changes (discrete graphics card)

Hello, I am having the same problem on Z510. How did you solve your problem ?

Read other 1 answers
RELEVANCY SCORE 67.6

Not sure where to put this, as I haven't gotten help in other forum parts, so I am putting it wherever I think it might work. Please help me, kudos to you if you at least try.
Computer model: Lenovo Y700
Microsoft 10
6th gen i7 processor
It has 2 graphics cards:

NVIDIA? GeForce GTX 960M 2GBNVIDIA? GTX 960M 4 GB GDD5
​16 gigs RAM

Ok my computer is having a problem with a black screen. This computer is brand new, arrived on the 14th. I was running World of Warships, then I closed the laptop, and when trying to re-enter, I get a black screen. Yes, I have tried shutting down. I can hear the hard drive, and can see the power button backlights, as well as keyboard backlighting. I cannot see the mouse. From reading other posts, I think it may have auto-selected the wrong graphics card. I have never used a TV or other screen with this. Please help me with this, I am a new windows user, having recently immigrated from IOS. A detailed explanation would be appreciated, because I have no idea how to do that much. Perhaps a graphics card issue?
Apps I had installed:
SteamTeam Fortress 2OperaChromeFirefoxWar ThunderHeroes and Generals
I hadn't messed with any settings.

Read other answers
RELEVANCY SCORE 67.6

Hello everybody,
I have a Dell XPS 13 9350 with an Intel HD Iros 540 graphics card.
Every worked nicely until an automatic update turned my screen black. After reinstalling Windows 10 from scratch, I discovered that with the generic graphics driver provided by Windows the screen works, but any specific driver for my card turns the screen black. I tried, with no success, in this order:

All the versions of the graphics driver found on the Dell website

20.19.15.4531, A07, 29 Dec 2016
20.19.15.4483, A06 07, Sep 2016
20.19.15.4454, A05 29, Jun 2016
20.19.15.4390, A04 14, Apr 2016
The latest driver found in the Intel website (15.45.16.4627)

None of these works. As soon as any of these drivers are installed, the screen turns black. Upon reboot, the screen stays black in the login screen.
The only fix I found so far is to remove the driver completely, and use the default graphics driver of Windows. I also had to disable automatic driver updates, otherwise the screen would turn black again upon reinstallation of the driver.
What are my options? Is there any diagnostic information I can provide that can help me troubleshoot the problem? I am a Linux user and I know very little about Windows.
Thank you in advance for any help you can provide.

Read other answers
RELEVANCY SCORE 67.6

Hi everyone,

I have a 2 year old system that was working perfectly with the following specs:

OS: Windows 7 64-bit Ultimate SP1
CPU: Intel Core i5 2400, 3.10 GHz
RAM: 4 GB Single Channel DDR3 821 MHz
Motherboard: ASUS P8P67LE
Graphics Card: Gigabyte - GV-R685OC-1GD
HDD: 932GB Western Digital WDC WD1002FAEX-00Z3A0

Suddenly one day when I was using the computer normally, the screen went black... There was no cursor, no desktop and Ctrl+Alt+Del didn't do anything. I hard rebooted, it started up fine and the windows logon screen appeared. However, as soon as I typed in my password and hit enter, the screen went black again, no cursor, no desktop and unresponsive. Sometimes some funny gray lines would appear on the screen but otherwise it was black.

I looked extensively for answers on this forum and it seemed to be essentially the same problem as described here (Black screen of death in Windows 7 64-bit Professional) so we used Stevan23's post as a troubleshooting guide. We tried virtually everything on Stevan23's list that was relevant to my system, and just like his experience, we never saw the black screen in safe mode.

My partner and I both have identical systems (identical hardware, except he runs a Linux OS), so I was able to test my graphics card in his system. Exactly the same thing happened, i.e. computer starts up ok but the screen goes black after the bios screen and never loads the desktop.

We also tried his identical graphics card in my system; it's working fine ... Read more

A:Black screen of death in Win 7 64-bit Ultimate - Graphics Card Issue?

  
Quote: Originally Posted by imoani


Hi everyone,

I have a 2 year old system that was working perfectly with the following specs:

OS: Windows 7 64-bit Ultimate SP1
CPU: Intel Core i5 2400, 3.10 GHz
RAM: 4 GB Single Channel DDR3 821 MHz
Motherboard: ASUS P8P67LE
Graphics Card: Gigabyte - GV-R685OC-1GD
HDD: 932GB Western Digital WDC WD1002FAEX-00Z3A0

Suddenly one day when I was using the computer normally, the screen went black... There was no cursor, no desktop and Ctrl+Alt+Del didn't do anything. I hard rebooted, it started up fine and the windows logon screen appeared. However, as soon as I typed in my password and hit enter, the screen went black again, no cursor, no desktop and unresponsive. Sometimes some funny gray lines would appear on the screen but otherwise it was black.

I looked extensively for answers on this forum and it seemed to be essentially the same problem as described here (Black screen of death in Windows 7 64-bit Professional) so we used Stevan23's post as a troubleshooting guide. We tried virtually everything on Stevan23's list that was relevant to my system, and just like his experience, we never saw the black screen in safe mode.

My partner and I both have identical systems (identical hardware, except he runs a Linux OS), so I was able to test my graphics card in his system. Exactly the same thing happened, i.e. computer starts up ok but the screen goes black after the bios screen and never loads t... Read more

Read other 3 answers
RELEVANCY SCORE 67.6

I've been having some weird oddities with my computer as of late. Completely at random, my screen will go black (for around 3 - 5 seconds) before eventually coming back on again and I'm noticing some weird, small, white horizontal lines randomly appearing across my monitor for about half a second, then disappearing. At first, I thought I was seeing things... but a friend of mine can back me up on this.

It seems to start and stop randomly, but I think it's getting worse. Often, the screen will go black, come back on, and then the process repeats several times before it seems to settle down back to normal again. The white lines appear while the computer is doing this, but not when the screen has gone back. They dot all around the screen, it's very hard to describe them... it doesn't look good, anyway.

I am convinced this is not my monitor. I have a funny feeling it's my Nvidia GTS 250 graphics card bugging out. I've checked the fan and the temperatures and all seems fine. I've re-installed the drivers and it still happens. I've dusted and re-inserted the card, no dice. It seems to happen completely at random and it's bugging me.

Has anyone had a similar problem before, or might have a clue what is causing this? I was planning on upgrading my machine in March anyway, but I was hoping my GPU might last a little longer (I've had it for two years or so now.)

Cheers.
 

A:Is my graphics card dying? - Black screen, odd white lines.

I'd be interested to know what your fps benchmark is. evga oc scanner is good. I have dual 460 gtx and the benchmark is around 95 fps. When I installed these in a new board my screen would go black when I paused for anything i.e. to agree to a download. I get a small vertical line loading a game but it didn't worry me for some reason. My benchs are ok, not impressive. After 2 or 3 restarts it hasn't frozen since. If your temps are good and it benchmarks ok I don't know enough and I'm not confident enough to answer questions. Somebody will help you. They put up with me. This is the best forum I've been on yet.
 

Read other 3 answers
RELEVANCY SCORE 67.6

Hello,
I have an emachines 370 with the Trigem IM845GL motherboard and Windows XP Home SP2 installed. This has the onboard graphics chipset (Intel 82845GL graphics memory controller hub). I recently installed an ATI Radeon 9250 PCI graphics card to get better graphics performance. This achieved the performance increase I needed, but after installing the new card, the system consistently took about 3-4 minutes to boot up and be useable after going through POST. There was also the same delay when using the "switch user" function.

I thought this delay might be caused by some internal conflict between the new ATI card and the motherboard onboard graphics. So I tried at first disabling and then uninstalling the onboard graphics through Device Manager/Display adapters, leaving the ATI card as the only adapter. On restarting, everything worked OK, but I still got the same slow boot problem as before.

Next step was to check the BIOS settings. This is a Phoenix BIOS. Under the "Advanced" menu, there is an option to set the primary video adpter to "PCI" or "Onboard". When I had initially installed the ATI card (i.e. before uninstalling the onboard graphics), I changed this to "PCI", but subsequently found that setting to this or "Onboard" didn't affect the signal output through the ATI card. So, after uninstalling the onboard graphics (probably foolishly), I tried changing the the setting back to "Onb... Read more

A:emachines new graphics card, now black screen, no POST, no BIOS

Start by resetting the cmos. This will reset the bios to the default settings.

Remove the new card from the machine. Hopefully your computer will now boot up ok, using the onboard graphics.

Is your psu putting out enough power for your new graphics card?

Regards Howard
 

Read other 3 answers
RELEVANCY SCORE 67.6

Hi all, heres a quick run down of my problem. about a month ago my pc started having errors at bootup. it would get as far as the desktop, then freeze the desktop, allowing me to still use my mouse but i couldnt select anything and the system would hang. After restarting on average about 5 times it would then work and my pc would run perfectly.

about 2 weeks ago i had a blue screen crash that mentioned something about the display drivers. (i was using a radeon 4870) i figured this, with the startup problem must be my graphics card on its way out. one day i started my pc and was greeted by my 1st 'black screen' with cursor and decided enough was enough and took out my graphics card, leaving only the on board graphics (radeon 4250). my pc worked fine for a few days and i decided to try and work out if the problem was software of hardware related so i reinstalled my 4870 card. this immediatly booted me to the black screen with cursor so strait away i took it out again.

so now im back to my on board graphics, however this time the problem has not gone. i am writing this via safe mode as i am still getting the black screen with cursor appear at start up.

ive tried start up repair which says there is no problem, ive tried disabling and uninstalling/re installing the onboard graphics but still the black screen.

anyone have any ideas short of re installing windows? thanks in advance

A:Windows 7 black screen and cursor - Graphics card related

Welcome aboard.

First, you are to clean the dust inside the computer, reseat the ram modules, clean the edges with cotton clothes, Reseat the sata and power cables, update the display driver.

Those actions may change the situation there.

Read other 1 answers
RELEVANCY SCORE 67.6

Hello,
I have an emachines 370 with the Trigem IM845GL motherboard and Windows XP Home SP2 installed. This has the onboard graphics chipset (Intel 82845GL graphics memory controller hub). I recently installed an ATI Radeon 9250 PCI graphics card to get better graphics performance. This achieved the performance increase I needed, but after installing the new card, the system consistently took about 3-4 minutes to boot up and be useable after going through POST. There was also the same delay when using the "switch user" function.

I thought this delay might be caused by some internal conflict between the new ATI card and the motherboard onboard graphics. So I tried at first disabling and then uninstalling the onboard graphics through Device Manager/Display adapters, leaving the ATI card as the only adapter. On restarting, everything worked OK, but I still got the same slow boot problem as before.

Next step was to check the BIOS settings. This is a Phoenix BIOS. Under the "Advanced" menu, there is an option to set the primary video adpter to "PCI" or "Onboard". When I had initially installed the ATI card (i.e. before uninstalling the onboard graphics), I changed this to "PCI", but subsequently found that setting to this or "Onboard" didn't affect the signal output through the ATI card. So, after uninstalling the onboard graphics (probably foolishly), I tried changing the the setting back to "Onb... Read more

A:emachines new graphics card, now black screen, no POST, no BIOS

trljcl said:



2) Clear the CMOS via the motherboard jumpers to reset to default settings - but not sure what this will do.Click to expand...

You should perform this step, but remove the Radeon PCI card first.

The Clear CMOS jumpers are precisely for this kind of mischief- to return BIOS to a known/working state in case the system can't get to or complete it's POST tests.

Once you've cleared the CMOS, you'll need to immediately go into the BIOS setup screens and redo all your settings, date, time, HD's, etc.etc.

At that point, you may reset video to PCI (disable onboard) and re-insert your Radeon. With any luck, Windows will boot and the drivers will still be intact and working.

As far as the pause you are describing before the BIOS fun.. did you install .NET and Catalyst Control Center version of the ATI drivers? These are very likely the cause of your pause/longer boot time and user switching.
 

Read other 4 answers
RELEVANCY SCORE 67.6

Hello,

I'm from belgium so sorry for my bad english. Here is my config:

Alim: ANTEC Neo HE430
MB : ASUS P5LD2
GC: MSI Geforce 7900gs (fanless)
Ram : 2*1 Go Corsair
Pro: Intel Core2Duo 6600
2*HDD SATA 250Go
Windows XP SP3

My problem:

I've just format my computer and re install windows xp. All is ok but when i try to install the graphic drivers from the nvidia site (ver 195.62), my graphic card is seen as Geforce 7900 GTX :-(
I also try with the old cd drivers from MSI and same problem...
I also try to take off the card from the computer and replace it... no change

So I think that is not so bad and that i m able to work with this config... but the other problem is:

When i reboot my computer (windows -> restart), my screen still black when the pc reboot. I can hear the windows startup sound.... I think that my computer boot normally but without the graphic card :-(
When i trun off the PC and turn it on, screen came back and windows appear...

My question is :

Problem with drivers ?
Problem with graphics card ?
Problem with motherboard ?
Problem with alim?

Thank you to have read me and maybe answer...

Renaud
 

Read other answers
RELEVANCY SCORE 67.6

Hi there,

I have a relatively new ACER Predator G3620 which came with a Radeon HD7770 video card. I've just bought a GTX580 Twin Frozr II to replace it. As a bit of a newbie I think I've made a bit of a mistake installing it. I opened up my computer case, took out my old video card, and put the 580 in it's place, attached the DVI lead to my SONY TV (which is the only monitor I have). The computer loaded up fine - and a low resolution picture came up. The drivers were out of date on the disk as I have windows 8, so I had to go on the net and find some up to date ones. During downloading the driver, the PC then crashed/restarted itself. When it came back on there was no video at all, just a black screen. Extremely frustrated at this point after pressing the power on/off button to try my luck a few times, still just a black screen, infact it doesn't even say 'no signal'. So I then put my old card back in (Radeon HD7770)(I originally used a HD cable to my TV with my old card) THERE WAS STILL NO VIDEO. What makes it even worse is... with all the Predator models, the manufacturers have disabled the normal VGI port for the dedicated on-board graphics. So I can't even just use an old VGI cable n hook it up to my tv to install the drivers and see what's up with my video cards. I don't know what to do! It's extremely frustrating having just a black screen when the PC is booting up just fine, all lights blinking, fans working, and ever... Read more

A:PC crash while installing new video card. / BLACK SCREEN!

P.S. I have used this site for a long time to help me with my tech problems for over the years. You guys are great. Any help would be much appreciated
 

Read other 2 answers