Over 1 million tech questions and answers.

Is there a "MacroButton" equivilant in Excel like the "MacroButton" field in Word.

Q: Is there a "MacroButton" equivilant in Excel like the "MacroButton" field in Word.

In Word, there is a field called “Macro Button”. On some of my forms where technicians make quality control tests on equipment, these tests were listed as steps and on the right side of the test form I used a MacroButton for each step. These buttons start out as just a plain white button. If the quality control test for that step passes, the technician clicks on the button and it turns green and says “Pass”. If the step fails, the tech. clicks the button again and it turns red and says “Failed”. There are a couple of other conditions assigned to the buttons, ie; N/A, Field to fix, etc. If you keep clicking on the button, it goes through all the conditions and come back to the beginning (Blank Button).

The Blank Button has a “Green - Pass” macro tied to it so that when the Blank Button is clicked, the “Green - Pass” macro runs, which replaces the Blank Button with a Green Button.

That now Green Button has a “Red - Fail” macro tied to it so that when the Green Button is clicked, the “Red - Fail” macro runs, which replaces the Green Button with a “Red - Fail” Button.

And so on. Each time you click the button it changes state and eventually comes back to the beginning. In other words, these buttons are sort of toggles and continue around and around.

Now, with all that said, I am way more fluent in Word Macros than I am in Excel Macros. What I want to know is anyone knows how to duplicate that feat in Excel. As far I know, Excel doesn’t have anything like the “MacroButton”. I am in the process of making similar forms only they have to be in Excel instead of Word.

If anyone is interested, I’ll post the macros and you can try it out in Word.

RELEVANCY SCORE 200
Preferred Solution: Is there a "MacroButton" equivilant in Excel like the "MacroButton" field in Word.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Is there a "MacroButton" equivilant in Excel like the "MacroButton" field in Word.

Read other 16 answers
RELEVANCY SCORE 230.4

In MS Word 2007 I created a field code where I click on it and then type something in it, I want another field code to automatically update to whatever I type in X
 

Read other answers
RELEVANCY SCORE 165.2

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 158.8

I want to create a field in a word document that shows yesterday's date. I do this in excel with the formula =now()-1, with appropriate date format settings for the specific cell.

How can I make a similar field in Word? I'm looking to make it on a single line that isn't so much in a "box looking" type field.
 

A:Creating a "field" in Word with an Excel formula

Read other 9 answers
RELEVANCY SCORE 153.2

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.6

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 149.6

Hi,

I have a Gmail account. I have a problem that when i send a mail TO any one and CC to others, when i see in sent items, it displays like normal but at the recipents end, the addresses in CC displays in TO field while CC dont appears. For example, i sent a mail and when i see the sent items, i found as following;

To: [email protected]
CC: [email protected]; [email protected]; [email protected]

when i see that mail in my yahoo account or other receipents, i/they found as;

To: [email protected]; [email protected]; [email protected].

While [email protected] also recieved that mail. it means mail sends correctly but addresses appear abnormaly.
Please help how to resolve this issue.
 

Read other answers
RELEVANCY SCORE 144.8

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 144.4

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 144

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

Read other 16 answers
RELEVANCY SCORE 143.6

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

Read other 8 answers
RELEVANCY SCORE 143.6

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 143.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 143.2

Hi every one,
I have Intel "DG31" and "core 2 do"
Program hangs, when i try to open or save as a file In "excel-2003" and "corel draw9" and "WILCOM Es9"
and in task manager it shows ?not responding?
But when i try to open it by clicking on the file using windows explorer it works quite well.
Earlier i used same programes on the "865glc" and "2.4" there was no problem,
I have also tried many Intel computers to trace the problem
i found the problem on every computer that was build on the motherboard later then Intel 865
Now what to do?
Mohammad Imran

Read other answers
RELEVANCY SCORE 142.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 142.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.8

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142.4

I installed some software to assist me in converting .pdf docs. I didn't keep the name of the software but did uninstall it via control panel.

I now have mulitiple "File" menu entries: 29 entries between "open" and "save". The entires are all idenical, "Open PDF"

Nothing happens when I click on them. How can I remove them from my "File" menu?
 

Read other answers
RELEVANCY SCORE 141.6

Hey gang.

A colleague handed me some key documents needed all the time.

However, some fields have some values that I cannot delete or change. Things like a date in the date field, or a contanct name etc.

Any thoughts how to undo this permanent value business ?
 

A:Word 2010 - deleting "hardcoded" field values

How were these documents made?
Some "Legal" documents must NOT be changed and there are ways to protect them.
I would contact your IT support and see what the company policy is on changing these documents.
 

Read other 1 answers
RELEVANCY SCORE 141.2

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 141.2

Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.

A:Pinning "New" and "Open" Word document to start menu

  
Quote: Originally Posted by ADKR


Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.


ADKR,
I note that you have posted this question in Microsoft's Discussion Groups - Windows 7 - Word 2007 in Word General Questions.
Some reasonable replies were given to you that you didn't respond to. Did you actually try them?


This Tutorial written by our Brink would seem to be a reasonable alternative for you to use.
Quick Launch - Enable or Disable

Read other 1 answers
RELEVANCY SCORE 140.8

I have a nested "IF" statement that inlcudes the "OR" function because I have more than 7 logical tests. One of the logical tests looks for two fields to be true in order to return the "value if true". If either or both fields are false, then the "value if false" is returned, in this case zero. When the value of the first field is correct, but the value of the second field is not correct, zero is returned, which is the "value if false" and a correct return.

However, when both fields are false, the formula is returning the word "FALSE" instead of zero.

The attached file shows these returns and the formulas. Cells F2-7 are corrrect returns (highlighted in green), while cells F8-11 are not correct returns (highlighted in red).

Any ideas on how to return the "value if false" (zero) in cells F8-11 would be appreciated.
 

A:Solved: Excel 2007 - Nested "IF" formula using "OR" Function

Read other 8 answers
RELEVANCY SCORE 140.8

How can I lock the "Now" or "TODAY" or "Date" FUNCTIONs IN Excel 2003?

This seems like it would be a simple solution as everybody that deals with Excel, at some point, would be interested in not having the dates you have entered with either function "Today" or "Now" NOT automatically change to the current date and time when you reload the workbook. But if it's a simple fix, I sure haven't been able to figure it out yet. Help!!!!!!!!!!! Go ahead and show me and make me feel like an idiot...

zjoeyx
 

A:Solved: Locking "Now" or "TODAY" FUNCTION IN Excel 2003

Read other 9 answers
RELEVANCY SCORE 140.8

Well, that's it really.

I'm using Excel 2007 and when I right-click on a cell or row, the "cut" and "copy" options are greyed out. I can still work using the toolbar menus and icons, or the shortcut keys, so it's not a big problem, but I'm not comfortable with the context menu not working properly.

This happens in all workbooks, including brand new ones. I've looked through the Excel Options but can't find anything.

Any ideas?
 

A:Solved: "Cut" and "Copy" greyed out in Excel's context menu

Read other 15 answers
RELEVANCY SCORE 140.8

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 139.6

Does anyone know if its possible to autofill the "from field" as a rule, when your in "another users /delegates" mailbox, so you dont have to add their address in the "from field"? (so it will autopopulate with their email address (and show "on behalf of")?
I hope this was clear.

thanks.
 

A:Solved: outlook 2007 "from field" 'on behalf of" issue

No ... its not possible if the user has more than one delegate (that has added them with the applicable rule). from that point on, they will have to choose which person they want to add to "sent" on behalf of field.

However, If they have just one (one only) user who has added them with that permission (to send on behalf of), it will auto-populate with that user.

So, It does not matter even if they are "in" a specific users mailbox (and expect the "on behalf of" to auto fill with that users name). If they have more than one delegate that has added them with that permission, they will still have to choose which user the message will sent "on behalf of"

i figured this out by trail and error etc
 

Read other 1 answers
RELEVANCY SCORE 139.2

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 139.2

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

Read other answers
RELEVANCY SCORE 139.2

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

Read other 5 answers
RELEVANCY SCORE 139.2

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

Read other 9 answers
RELEVANCY SCORE 139.2

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 139.2

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 138.8

Word all messed up at the moment. Tool bars misssing and loads of other small annoying things.

How do I start from scratch with Word again ?
 

A:Getting "Default" or "factory" settings of Word back

Delete all occurances of normal.dot Make sure Word is closed.
 

Read other 2 answers
RELEVANCY SCORE 138.8

In Word, I have lost the "Symbols" line in the "Insert" menu. How can I get it back? Any help will be most welcome!
 

A:"Symbols" lost in "Insert" menu - Word

Rightclick the menu bar & choose "Customize" (sic) from the pop-up.

With the "Commands" tab uppermost, click on "Insert" under "Categories".

Scroll down the "Commands" list till you see it, then drag it to your "Insert" menu.

Rgds,
Andy
 

Read other 2 answers
RELEVANCY SCORE 138.8

Anyone--who's skilled in formula set up,

I am not sure if my formula (=IF(AND(E6="N/A"),"No Data",IF(OR(AND(E6="W"),AND(E6="L")),D6,"0")) is set up correctly--but does not meet my expections.

Can you please help me with this? Basically IF "WIN", copy # from other cell, IF "LOSE", put down "o" (zero). See attached-- to give you an idea of what I am talking about. Hope to hear from you by tonight? I need the answer before tomorrow's games.

Thank you.
 

Read other answers
RELEVANCY SCORE 136

Hi guys, I ask you a lot of help because I'm in trouble up to my neck. I try to be as detailed as possible.
I have a Packard Bell with initially installed Windows Vista Home Premium (I don't know if 32-bit or 64-bit). Over time I updated it to later versions, and in fact before the problem I normally had Windows 10.

Brief introduction: as you know, telematic lessons have started in the world at home. So I installed Microsoft Teams and so far everything is ok. I noticed, however, immediately that the fan of my old PC with more than 10 years of intense work was starting to fuel quickly. While I was thinking about how to solve, the inevitable happened: during a lesson the PC freeze in the screens, and after waiting 5-10 minutes I turned it off by the button. By re-accessing it, this screen appeared, as the title says:

"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."

If you do not have the disc, contact your system administrator or computer manufacturer for assistance.

File: \ Boot \ BCD
Status: 0xc000000f
Info: The Boot Configuration Data for your PC is missing or contains errors. "

What I did: I searched on this and other sites but I was not able to juggle well. I understood that you need an installation CD, which I DO NOT ha... Read more

Read other answers
RELEVANCY SCORE 136

Guys,

I am a little confused with regard to some of the mail options in Outlook Express. (I have version 6) What is the difference between the "Drafts" and "Outbox" folders?

Further how does the "Send Later" option work from the file menu? I always thought that "Send Later" was the same as using "Drafts" but what happend was that I was doing an e-mail, went to Drafts, or clicked on "Send Later" or Outbox and then after I clicked on "Send" doing a regular send, I checked my Sent folder and about 3 copies of the same message were delivered to the same person! (I only sent one message-not 3!)

What is the deal with the "Outbox" folder? Apparently that is not like the Drafts folder....correct?

What's the difference between doing a Save, Save As, and Send Later with regard to OE functions? If I want to save a message that isn't done yet, which of these 3 options should I use? (I.e, I want the message to go to the Drafts folder for example and stay there until I TELL OE to send it.) I think whatever I did above was that I modified my message and then click on where it just automatically sent next time I opened the message. A review of these features would be helpful!

Just for the record, I also use Yahoo Mail and find that so much easier!

Jack
 

A:Please Review OE "Send", "Drafts", and "Outbox" Options

Jack
To save an E-Mail to your Drafts folder for work on later then you use the File\Save option.
If you wish to save the E-Mail in another format such as .EML or .TXT or .HTM then you use the Save as function. You will also be required to specify a folder to save in or use its "My Documents" default.
Send later function if only one e-mail account exists will place the e-mail in the outbox and send it the next time you click on the send receive button. If you have multiple accounts then you can specify which account to send it from.

Dave
 

Read other 2 answers
RELEVANCY SCORE 136

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

Read other 1 answers
RELEVANCY SCORE 136

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

Read other 3 answers
RELEVANCY SCORE 136

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

Read other 4 answers
RELEVANCY SCORE 136

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

Read other 1 answers
RELEVANCY SCORE 136

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

Read other 1 answers
RELEVANCY SCORE 136

I have a 7200rpm hard drive that shows up as 3 separate partitions on my MacBook Pro desktop. They are "System Reserved", "Untitled 1" and "Untitled". When looking at them in the Disk Utility program, they show up as "System
Reserved",  "disk2s1" and "disk2s3". I can't seem to find a way to wipe the drive and just have 1 partition. I don't need to save anything on it so it can all be deleted and consolidated. Not sure if this helps but the previous
owner told me that he had accidentally erased another partition that prevented the hard drive from being reconsolidated. It also may have been a Windows boot drive. Any help in restoring this hard drive would be appreciated. Thank you.

Read other answers
RELEVANCY SCORE 136

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

Read other 4 answers
RELEVANCY SCORE 135.6

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

Read other answers