Over 1 million tech questions and answers.

Log File 06 May 20007

Q: Log File 06 May 20007

Hello

Here is my log file which i was told to post her after i ran DSS

Thanks

Steve

RELEVANCY SCORE 200
Preferred Solution: Log File 06 May 20007

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Log File 06 May 20007

Hi MUMFORD54
Describe the problems in as much detail as possible

You missed posting dds's main.txt >
Provided dds.exe is still on your desktop
Please run Deckard's System Scanner again, this time using these instructions:

Click the Windows 'Start' button > Select 'Run' - then copy/paste this into the run box & click OK "%userprofile%\desktop\dss.exe" /config Tick

[x]main log
[x] system restore
[x]temp cleanup
[x]hijackthis
[x] hijackthis ignored
[x] file assosiations
[x] drivers
[x] services
[x]scheduled tasks
[x]file dump
[x]registry dump

Click Scan!

When finished, it shall produce a log for you. Post that log in your next reply.

Read other 2 answers
RELEVANCY SCORE 50

Hello; Yesterday, AVG 2011 did an automatic update on my ASUS n55sf laptop. After reboot, Outlook 2007 displays message " cannot display the view" and none of my folders can be opened. Spoke to AVG and loaded AVG 2012 internet security; same problem. Started outlook in safe mode and attempted to disable avg add on, but get message that I need to be logged on as administrator (I am the administrator and only user of the laptop. Went to program files x86, office 12, outlook and right clicked on outlook logo and selected run as administrator; still cannot disable avg add on, getting the same administrator message. any ideas anyone?

A:outlook 20007 freezes after avg update

You can try to restore your computer, and seriously consider removing AVG and using something better, such as MSE

The choice is yours, please don't feel like I am pressuring you, just a recommendation. To remove AVG, use the correct uninstaller from AVG: AVG | Download tools and utilities

If you do not want to remove AVG, I would recommend bugging them until someone gives you the help you need, or waiting here for some other help from another member.

Do make sure windows is completely updated for compatability and stability reasons.

Read other 5 answers
RELEVANCY SCORE 48.8

we have disabled SSL2 & SSL3 and TLS 1.0 also in my server but still showing 20007 - SSL Version 2 and 3 Protocol Detection vulnerability issue.
can you help me anyone ? 
Server SSL existing setting screenshot for your reference 

Read other answers
RELEVANCY SCORE 43.2

I have emailed spreadsheets created in Office 2003 to other staff members running Office 2007. They can open the attachment, work on the spreadsheet, save and close them. However, if they go back to the document later, it can't be seen. I say that deliberately; if you try to click on the document to open it, you will get the "can't open it it's already open" message. So it's there, somewhere, but nobody can see it.

I downloaded the compatibility patch from Microsoft, but no help.

What is up with this? Leave it to Microsoft to create a new program that instantly renders your old software obsolete.
 

Read other answers
RELEVANCY SCORE 43.2

I have a form which has a subform called SearchMainSub with displays data from the following:

Me![SearchMainSub].Form.RecordSource = MyRecordSource
'
'If no records match criteria, display message and move
'focus to Clear button
'
If Me![SearchMainSub].Form.RecordsetClone.RecordCount = 0 Then
'MsgBox "No Maintenace Records Found", 48, "No Records Found"
Me!Clear.SetFocus
Else
'
'Enable control in detail section

The problem that I am having is that it only displays the first record. I have tired all of the options in the data field for RecordSet Type. It still only displays the first record. Anyone have any ideas? I hope this one is as easy as the other question I asked.
 

A:Solved: Access 20007 Record Display 1st record only

Read other 6 answers
RELEVANCY SCORE 29.2

In windows 7 pc whenever trying to attach a file on outlook nothing is happening or no file/folder is opening and whenever select any file on application for mounting no file or no drives are opening....

Read other answers
RELEVANCY SCORE 27.6

Hello,  I have just discovered a new MALICIOUS FILE IN MY LIBRARY DOCUMENTS.  This file named (1) Kathie Cargill- Barber contains several  (about 30) malicious virus's.  I did NOT CREATE THIS FILE !!!!!!!  It is dated 4-154-17
all at 10:42 am.   How do I delete this file????? Please help.... I am going thru a bad divorce and my husband's boyfriend is a computer software Engineer.... I believe he put this file on my computer..... PLEASE HELP!!!! I am 59 yeras old and not
very good on the computer.....My name is Kathie

Read other answers
RELEVANCY SCORE 27.2

I ran hijack-this on my laptop today and I get a lot of errors when I post on this site http://hjt.networktechs.com/parse.php and check to fix them and they keep coming back. I have heard this was a common somewhere on the web? I don't think it is .., am I wrong? Please help!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:58:39 PM, on 9/6/2010
Platform: Unknown Windows (WinNT 6.01.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\Norton 360\Engine\4.2.0.12\ccSvcHst.exe
C:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files (x86)\Norton Utilities 14\RMTray.exe
C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe
C:\Program Files (x86)\Steam\steam.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe
C:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe

R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =
R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = *.local
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
F2 - REG:system.ini: UserInit=userinit.exe
O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Progra... Read more

A:Windows 7 64bit unable to file missing file in Hijackthis log file

It's doubtful those files are missing. More likely a bug still present in HijackThis where it cannot correctly enumerate some entries, so it gives a (file missing).

I would not put any faith in online analyzers such as that one. Much better to use these online databases

www.systemlookup.com
http://www.bleepingcomputer.com/startups/
http://www.bleepingcomputer.com/filedb/

There's nothing wrong with any of those entries. Please leave them alone.

Analysis logs are only to be posted in this section of the forum, not General Security. I've moved it here.

I see no sign of infection in those logs. If you think the machine is infected...


We no longer use HijackThis as our initial analysis tool.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

---------------------------------------------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, not here. I currently have as many open malware removal assistance topics as I can effectively handle.

If you have trouble with one of the steps, simply move... Read more

Read other 4 answers
RELEVANCY SCORE 26.8

God bless you, I am not a computer person please help me to fix the problem I have.
Every time I open a word, power point and note pad program another file is opens with that (with a infinity sign in the front with the same extension ) is that a thread or how can I stop this

thank you
R.Gnanavannan

Please someone help me

A:when open a word file or pwrpnt file another file is opens

Welcome to the Seven Forums.

I saw your post right after you made it but I did not post a reply because:
1) Real life got in the way
2) I'm not sure that I understand your issue.
I'm not picking at your English, but this is important:

Your post mentioned, "another file is opens with that".

I'm guessing that you meant:
...another file is opened with that
or
...another file opens with that

Either way, the word open is really important to the description of your problem.

Let's just talk about Word for now.

When you open a Word, one or more temporary files may be created. This is normal and desired; but those temp file(s) should not automatically open in Word.

Please try this:
Close all copies of Word.
Open Windows (file) Explorer.
Double click on an existing Word document.

How many windows do you have open for the Word program?
(Hopefully, just one.)

How many files do you have open in the Word program?
(Hopefully, just one.)

Are you seeing this file that bothers when you look at Word or when you look at Windows (file) Explorer?

Please show us what you see and where you see it.
Here is a link with instructions about posting screenshots to this forum:
Screenshots and Files - Upload and Post in Seven Forums

Your post mentioned, "(with a infinity sign in the front with the same extension )"
The temporary file(s) that Word might create should start with a Tilde character and then the dollar sign (~$), not the symbol for infinity. And Notepad s... Read more

Read other 1 answers
RELEVANCY SCORE 26.8

Hi all,
I need help to create windows batch file for following requirements.
1. Remove .txt and .log file format in sub folders.
2. Zip individual file inside any sub folders and give file name through command prompt. 
3. Create sub folder zip file include file zip

Read other answers
RELEVANCY SCORE 26.8

I have been using this same Excel file for many years. I viewed on my new home laptop 2 days ago, using a 2010 Excel Version. It was created on 2007.

I opened it on my work computer, version 2003, and now get the above error message on both machines. The file can no longer be opened.

I have tried emailing it, still won't open.

I have chenged the file type to both .xls and .xlxs neither open.

I downloaded the program on the home page of this site, and it said no file issues, no known problems for this file.

When I click Open File, it still shows where I had the file opened (the file name in lighter gray font - but cannot open.) The original file is in black, and I can open. But, get that message.

I also tried to open and fix - and I tried both options, with formulas, and without formulas, and all it opened was foreign characters.

Any other suggestions? Or is this file gone? Unfortunately, my most recent back up is 3-4 months old...

Thank you for your help,
 

A:Excel File now says File Format or File Extension is not valid...

Read other 6 answers
RELEVANCY SCORE 26.8

Hi all,

Any idea how to write Batch File .bat to copy file from File Sharing & FTP Hosting to local directory.

Current the File Sharing & FTP Hosting is SMARTFILE.

I don't want to use WINSCP as the connector.

Thanks

A:Batch File .bat to copy file from File Sharing & FTP Hosting

Hi Chacha,

Give this batch file a try. All text in red, you should adjust before running.


Code:
@echo off
(
echo.Username
echo.Password
echo.lcd C:\Some\local\directory
echo.cd /Some/server/path
echo.binary
echo.get Some_file_to_download.txt
echo.bye
) > "%TEMP%\_%~n0.ftp"
ftp -s:"%TEMP%\_%~n0.ftp" "12.34.56.78"
del "%TEMP%\_%~n0.ftp"

Read other 1 answers
RELEVANCY SCORE 26.8

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
 

A:Excel cannot open the file 'file.xlsx' because the file format

Older versions of Microsoft Office can't open the newer office formats,try updating and installing Microsofts file format converters. http://www.microsoft.com/en-gb/download/details.aspx?id=3
 

Read other 2 answers
RELEVANCY SCORE 26.8

Hello everyone,

Firstly I would like to say that this seems like a swell enough forum as is and I am frankly out of ideas. About a year ago I had backed up a rather large series of files under one name for my roommate who was in the process of doing some "spring cleaning" on his computer. Fast forward to now and he is out of Hard-drive space damn near and has been unable to find the reserve file himself. Below is the directory under which I named and saved the around 200gb file of games and old-ROTC documents. Regardless the file needs to be found and even after un-hiding all files from the control panel, I have yet been able to locate it. It would seem to be simple enough, one would think that you could see the file name sitting above Program Files but it is not. Any one have any ideas, we would rather not have to reformat/ system restore if we can avoid it.

C:\common_ORIGINAL NEW FAGS
 

A:File path error/ Cannot find file directory/file itself

I used a software called TreeSize which shows the size of all folders on the disk. Thinking that the Windows OS is around 18gb, a 200gb files should really stick out with TreeSize.
https://www.jam-software.de/customers/downloadTrial.php
 

Read other 1 answers
RELEVANCY SCORE 26.4

I tried the recommendations for fixing this below:









 


Follow these steps to grant full permissions to the folder where the files are stored: 1. Right click on the folder on the external drive and click on
properties. 2. On the property window, click Security tab.
3. Now click on Edit and then click Add.
4. Now type everyone in the box and
click OK.

5. Then check Full control check box.

6. Click on Apply and then click OK.
You may also try the below mentioned steps:
1. Click on Start. 2. Go to Control Panel. 3. Select "SOUND". 4. Double click on speakers. 5. Click on advanced tab and then uncheck enable audio enhancements.






But then I received the error message that I don't have rights to edit and add.  Why would this be?  I am the administrator?

Thanks!

A:Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.

Hi,
Please first take ownership of the folder or files, then give yourself full control permission.
Learn How to Take or Assign Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
Yolanda Zhu
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 26.4

I just have to empty a SD card; compressing its contents to a 7zip-file takes too much time, and if I have to access the files quickly, I prefer to use a mountable filetype. Thus the requirement to quickly create a VHDX-file, then mount it using the context
menu.
Tested using Windows 8.1 without Hyper-V-Role installed.
First, you need to create an empty vhdx-File as a template.
You already have to specify the maximum size this vhdx is allowed to expand to, in my case 255 GiB (255 GiB × 1024 MiB/GiB = 261120 MiB). This can be placed in either your user profile or shared for all users:

Current User: C:\Users\%username%\AppData\Roaming\Microsoft\Windows\Templates\All Users: C:\ProgramData\Microsoft\Windows\Templates\
To create the template:
1. Start an elevated command prompt
2. Run diskpart.exe
3. Enter the following commands:
create vdisk file=C:\ProgramData\Microsoft\Windows\Templates\Virtual-Hard-Disk.vhdx type=expandable maximum=261120
attach vdisk
create partition primary
format fs=ntfs label="Blank Virtual Disk" quick
assign letter=z
detach vdisk
exit
4. Once the template is in place, just run this command:
reg.exe add HKCR\.vhdx\Windows.VhdFile\ShellNew /f /v FileName /t REG_SZ /d Virtual-Hard-Disk.vhdx
Voilą!
Now you just have to right-click in any file explorer window, also on remote network shares, select New > Hard Disk Image File and rename the file as you wish!

L.

Read other answers
RELEVANCY SCORE 26

I need to change a zip file to an epub file. I have heard this can be done, but when I add the .epub after the file name, I notice the file is still actually zip type file when I right click properties. This is causing a problem when I try to open it in in different ebook reader programs.

I know there is a way to change a file's actual file type, but I don't know how. Perhaps there is a software or I need to go into the registry?

I can do this either with windows 7 or XP home, because I have two computers. So help on either operating system would be great?

As a related question, I am wondering does changing a file's icon type actually change the file type or just the icon?

A:How do I change a file's file type (not only file association)?

Hi awd and welcome to Seven Forums.

I take it that your zip file is an e-book. Changing the extension does nothing to change the format of the data. If you have need to convert an e-book from one format to another try Calibre. In addition to managing e-books it allows you to convert from one form to another. calibre - E-book management

Read other 8 answers
RELEVANCY SCORE 26

I would like to know if there is a way to open a file in a program. Basically I want something like this (this is totally wrong):

open "C:Users\*My name*\My Documents\run.swf" in "C:\Program Files (x86)\Mozilla Firefox\firefox.exe

Thanks
 

A:Create a batch file to open a certain file in a certain file

The more standard way to do that is to use the start cmd. You call the program first and the file name second.

start "" "c:\windows\notepad.exe" "c:\somepath\logfile.txt"
 

Read other 2 answers
RELEVANCY SCORE 24.8

Ok I'm totally at a loss on how to word this so I'm just going to write it out the best that I can...

First I have a batch file that I'm writing that will convert mp4 files to mp3 files (I have a lot) for a buddies band using ffmpeg.

Here's the code that I'm using:

ffmpeg -i folder\video.mp4 -f mp3 -ab 160000 -vn "\different folder\music.mp3"

what I would like to do is add to this so that I don't have to write out this code for every file I have... :/

I have the mp4 files in one folder and than the mp3 files are saving to another folder.

So here's an example of what the code will do if it isn't clear yet.

Folder 1:

video1.mp4
video2.mp4
video3.mp4

what it should do is grab video1.mp4 and convert it.

ffmpeg -i folder\video1.mp4 -f mp3 -ab 160000 -vn "\different folder\music1.mp3"

and than move onto the next one

ffmpeg -i folder\video2.mp4 -f mp3 -ab 160000 -vn "\different folder\music2.mp3"

and than the next one

ffmpeg -i folder\video3.mp4 -f mp3 -ab 160000 -vn "\different folder\music3.mp3"

It's going to have to grab the name from the mp4 file and insert it for the mp3 file.

I can get around pretty good in cmd if it's basic commands but when it comes to something like this I'm a little confused...

Thanks for the help in advance!
I'll see what i can do about searching some more on what I would have to do and if I find the solution I'll post it here if it isn't already answered.

A:Batch File that grabs file names from folder to insert into batch file

A DOS "for /f" loop should do the trick, although changing the filename extension for the output to do everything in one line escapes me at the moment.

Perhaps you could do a dir .\folder\*.mp4/s/b > mp4s.txt, then make a copy of that and edit each line to rename the file to the destination name, and save it as mp3s.txt. Then you just feed both the source (mp4s.txt) and destination (mp3s.txt) filesnames into the for /f loop which handles the ffmpeg conversion.

Quite a crude solution and you'd have to handpatch the destination filenames, but i can't think of how to get a source mp4 filename and then just change the extension.

Read other 3 answers
RELEVANCY SCORE 24.8

whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.please help.

A:hidden file of docx file created with ~$name of file.docx file

That's normal and nothing to worry about.
It's a temp file Word creates when you open a file.
If Word closes normally, the temp file gets deleted.

Read other 1 answers
RELEVANCY SCORE 24.4

First, what does "CBS" mean in cbs.log?

Does the cbs.log file show only errors? I create a cbs.log file a lot, so if there are errors, I'd like to correct them. However, my computer seems to be working just fine. sfc /scannow shows everything is OK.

I've tried findstr /c:"[SR]" %windir%\logs\cbs\cbs.log > c:\test.txt to create a text file so that I can read the cbs.log file, but this command creates the test.txt file with 0 bytes, and I know the cbs.log file is at least 1,000 bytes.

So, 1) how do I get a workable copy of my cbs.log file, and 2) how does one interpret its meaning?

Thanks.

A:CBS.log file: Getting a usable txt file and interpreting the file

You don't have any [SR] flagged entries in the cbs.log file.

To look at it, from a Command Prompt, enter:

notepad %windir%\logs\cbs\cbs.log

If you use Ctrl+F you can search for things, like [SR].

I believe System File Checker (SFC) adds the [SR] entries. If you haven't run it then they won't be there.

Read other 3 answers
RELEVANCY SCORE 23.6

DETAIL - 
 6 user registry handles leaked from \Registry\User\S-1-5-21-876378617-1490751924-622671684-72003:
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 704 (\Device\HarddiskVolume2\Windows\System32\winlogon.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\Disallowed
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\MY
Process 768 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-876378617-1490751924-622671684-72003\Software\Microsoft\SystemCertificates\CA

Read other answers
RELEVANCY SCORE 23.6

If anyone could help that would be amazing something very bad happened.]
I use windows 8.1 im using hypercam v2 and i was recording something very important worth 100$ and i got scammed but for some reason when i try to open my video it says "Windows Media Player encountered a problem while playing the file." 
 
Ive recorded 100s of times and this never happens so why is it saying this and please if anyone can help me fix this that would be a life saver!
 
feel free to ask more questions 
 

A:Broken file! Windows Media Player encountered a problem while playing the file.

You could try playing it in VLC?

Read other 2 answers
RELEVANCY SCORE 23.6

I need the Realtek DASH Client Service for Windows 10 64-bit. It is supposed to be at the link: https://support.lenovo.com/hr/en/downloads/ds504102 The readme refers to the correct file. However, Realtek DASH Client Service does not exist in the archive itself. It seems the wrong file was linked to the page. Can someone at Lenovo update the download link with the correct files? Or, does someone else know where I might find the correct files?

A:ThinkPad A475 - Wrong file on download page - help finding the correct file

Something like this is what should be in the archive (see atatched)

Read other 1 answers
RELEVANCY SCORE 23.6

Dear All,

I need to create a batch file which can read the size of file(e.g. 1kb, 2kb...etc) from specific folder and detect 0kb file and convert it to text file (showing 0kb file size) with alarm.

I am not really sure how to write command for this batch file. Please help :-(
 

A:How to create a batch file to read size of file on specific folder path

Read other 10 answers
RELEVANCY SCORE 23.6

Hi 
 
I am using windows 7 ultimate 64 bit and this virus change extensions to word pdf and jpeg files, Extension *. bemrjof  was there to my entire Microsoft office data and all the PDF's and all photo file formats.  I tried many things but nothing worked, then I try to manually change the extensions and got really scared when saw that file is corrupted,i really don't know what to do anybody has any suggestions plz let me know.
 
thank you 
 
yogesh

A:Virus changed file extensions of Microsoft office file, PDF's and photo files

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/565923 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 23.6

During a TrendMicro virus scan, it found an archive that was infected. A quick check of the archive (Which I'd grabbed months before, but never ran) showed it was actually an application, so I went to shift+del the file (No sense dumping a virus into the recycle bin), and poof it's gone.

Then I went to delete the folder it was in, but... it wouldn't let me. Told me I didn't have the permissions to do so. A quick check of the folder's contents revealed the virus/app was back, as if it had never been deleted.

If I try doing a regular delete, it tells me Destination Folder Access Denied.

So I started poking around the file's security properties.
"Unable to display current owner."

I tried changing the owner, but it wouldn't let me do that.
I downloaded Unlocker, right-clicked on the file and unlocked it, but nothing seemed to happen, and same results when I try to delete it.

I'm running Vista 32-bit, not connected to a local network (Just one computer), and I'd really like to delete this virus/app off my machine. TrendMicro was unable to get rid of it, and I can't seem to get rid of it either.
 

A:Solved: Cannot delete file / No Permissions - Unable to display current owner of file

Ha, nevermind. Unlocker just took an enormous amount of time in actually starting up, and turns out the virus scanner had a process linked to the file. So, problem solved. Nothing to see here.
 

Read other 1 answers
RELEVANCY SCORE 23.6

I have a smartphone running Windows Mobile 5.0. I tried to install Acrobat Reader and it didn't work. Now the .pdf association with File Viewer doesn't work. Does anyone know how to create file associations? Either a registry hack or free software would be good.
 

Read other answers
RELEVANCY SCORE 23.6

Please review steps already taken here:

http://www.bleepingcomputer.com/forums/topic435318.html/page__gopid__2531767#entry2531767

DDS results:
.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_30
Run by HP at 23:13:02 on 2011-12-31
Microsoft Windows 7 Professional 6.1.7601.1.1252.1.1033.18.8174.5429 [GMT -5:00]
.
AV: Norton Internet Security *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Norton Internet Security *Enabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Norton Internet Security *Enabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files\IDT\WDM\STacSV64.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\Hpservice.exe
C:\Windows\system32\atieclxx.exe
C:\Windows\system32\vcsFPService.exe
C:... Read more

A:Infected MBR - Norton power eraser says rikvm_C6F09094.sys is a bad file but the file remains and never gets fixed

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you are unable to create a log because your computer cannot start up successfully please provide detailed information about the Windows version you are using: What we in particular need to know is version, edition and if it is a 32bit or a 64bit system. [/b]If you are unsure about any of these caracteristics, just let us know and we'll help you figuring it out. Please also tell us if you have your Windows CD/DVD handy.Please include a clear description of the problems you're having, along with any steps you may have performed so far.Please refrain from running tools or applying updates other than those we suggest while we are cleaning up your computer. The reason for this is so we know what is going on with the machine at any time. Some programs can interfere with others and hamper the recovery process.Even if you have already provided information about y... Read more

Read other 21 answers
RELEVANCY SCORE 23.6

I run into this problem often. When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. My work flow is always the same - I am the computer's administrator.
I am the only person with access to this computer. There are no other users on this computer. This computer is not tied to any server or network. My files are generated from my own work obtained from my camera. I normally save changes to the file several times
so I won't lose my work. I can save the file using a different name, but then I cannot delete the original file unless I reboot the computer and open it up again. Please explain why this randomly reoccurs.

A:File Access Denied - You require permission from the computer's administrator to make changes to this file

Hi dmiddleton123,
"When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. "
When did the issue start to occur ?The issue only occur with the specific software ?Have you tried to change another location to saved file or reopen the software (end the software process from the task manager)to have a check ?
This issue is a little weired,please take the following steps to have a check .
1.Run "sfc /scannow" to check the health of the system files .
2.Perform a full scan with an antivirus software .
3.Perform a clean boot to verify whether there is a third party conflict here.
How to perform a clean boot in Windows
http://support.microsoft.com/en-us/kb/929135
4.Create a new administrator and login with it to have a check.There is a possibility that the present account profile has corrupted.
 
If the issue only occurred with the specific software ,it is also recommended to ask for help from the software developer .
Best regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 23.6

I've been searching the web on how to accomplish this but am coming up empty handed so I am hoping someone here can help...

I want my batch file to read a random line from a text file into an environment variable - can this be done?

I am using Windows 2000.
 

A:Batch File -- Read Random Line from External File into an Environment Variable

Read other 6 answers
RELEVANCY SCORE 23.6

I have been using Sage WinForecast V4.03 for several years and it worked fine on Windows 7 and until 4 days ago on Windows 10. Now when I try to load the program I get the message
'overflow while accessing registry or .cfg file'.

I have tried a clean reinstall of the software and also reinstalled form backups and no change. I also tried a previous version of the software and that worked (but would not read my later version files :-/) and also cleaning/defragging the registry.

I have tried searching the web but cannot find any reference to this issue.
Thank you for your help in resolving this.

Read other answers
RELEVANCY SCORE 23.6

On my work computer (Windows 7 Enterprise), I've noticed a very strange and troublesome bug appears when navigating the Save-As directory.  The usual Google searches are utterly fruitless and bloated with far-off tangents completely unrelated to this
issue... and a search of this forum and help library are equally helpless, so I thought I'd try a more direct approach.

I use custom shortcuts to zip through my folder hierarchies (my personal way of organizing stuff, since I use tons of folders).  I simply ctrl+C (copy) the folder I want to link to, then right-click and pick "paste shortcut", to make my
little quick-link.  That's what I mean by "shortcut" henceforth (nothing to do with keyboard shortcuts).
So, in any program (for example, AutoCAD 2013), pick "Save As..." and the standard browsing dialogue box opens up.  Normal behavior is opening a folder to save the file in it, or going up a level.  No problem.
The issue happens when clicking through one of those shortcuts I mentioned above.  When you do this, Win7 inexplicably (and very annoyingly) changes the existing SaveAs filename (default, or one you entered) to the name of that shortcut instead, destroying
the original filename in the process.
An example: create a folder in your My Documents, then a shortcut for it (as explain above).  Now try saving an image from Wikipedia or something, into that folder you just created.  If you get th... Read more

A:Windows 7 Enterprise bug - file save-as renames a file if passing through a folder shortcut

Hi,
I have followed the example you mentioned to save a picture to the folder shortcut, and the name won't change to the shortcut. Also the picture would be saved into the original folder.
Here is the steps I did:
1. Create a folder named New folder in My documents:
2. Select it and then press ctrl + C and right-click on destop choose paste shortcut(named New folder-Shortcut);
3. Right-click on a picture in one webpage then open the save picture as dialog box;
4. Navigate to the desktop folder shortcut and double-click into it, the file name field won't change;
5. My machine is Windows 7 Enterprise SP1.
Would you please tell some more details on how you saved the picture?
In addition, there might be some other applications triggered this action, we may take a look with process monitor:
The download link here:
Process monitor
And here is a blog talking about how to use it:
Process Monitor - Hands-On Labs and Examples
If possible, please redo the action, then upload the result into onedrive and paste the link here.
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 23.6

Hi

Ive been searching the net for help with this and i just cant find what im looking for.

Im still new at excel macro's so still learning everyday.

I need help to wright a macro that will search in a folder for a file with a specific keyword that can be in the file name.

example: lets say i want to open a file that is in a folder that has "leadership" in the files name.
Because i send the file to people called "leadership.xls" and i recieve files back called "copyofleadership.xls" and different other names but there will always be leadership in the file name.

Can anyone please help me with this.

Thanks
bill6432
 

A:Excel macro to open a file in a folder with a specific keyword in the file names

Read other 6 answers
RELEVANCY SCORE 23.6

Logfile of Trend Micro HijackThis v2.0.2Scan saved at 11:10:21 AM, on 9/6/2009Platform: Windows Vista SP2 (WinNT 6.00.1906)MSIE: Internet Explorer v8.00 (8.00.6001.18813)Boot mode: NormalRunning processes:C:\Program Files (x86)\Google\Google Calendar Sync\GoogleCalendarSync.exeC:\Program Files (x86)\Elaborate Bytes\VirtualCloneDrive\VCDDaemon.exeC:\Program Files (x86)\Avira\AntiVir Desktop\avgnt.exeC:\Program Files (x86)\Internet Explorer\iexplore.exeC:\Program Files (x86)\Internet Explorer\iexplore.exeC:\Windows\SysWow64\Macromed\Flash\FlashUtil10c.exeC:\Windows\sysWow64\SearchProtocolHost.exeC:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exeR1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157R0 - HKLM\Software\... Read more

A:Intermittent Crashes, Vista Ultimate 64, whats with the "file missing" entries in my log file

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 23.6

Hi.

Windows 7 Pro SP1 64 bit
Intel i5 CPU @2.67 GHz
8 GB RAM

This problem just started recently or I only noticed it in the past week or so. When I'm in any application that launches the File Open dialog, including any browser's "Select File/Browse" button to choose a local file, when I select a file (even a small 1K file) from the dialog and the dialog closes, there is a 5 - 10 second delay before the app responds and either opens the file or in the case of a browser, displays the file name. In those 5-10 seconds, the app is non-responsive. In a browser, other fields on the form cannot be clicked or selected for the 5-10 second period -- then the selected filename appears on the form.

This happens in all 4 browsers I tried: Chrome 32, IE 11, Firefox 26, and Safari.

I also booted Windows in safe mode and the problem still occurred.

I also ran KingSoft Office Writer and selected File->Open and the same issue occurs after selecting the file -- there is a noticeable delay that wasn't previously there.

In a code editor (PSPad), opening a file does the same thing as well (hangs for several seconds after selecting the file).

Randomly during testing, (but probably < ~5% of the time) it doesn't delay and works properly.

I ran System File Checker and MS Security Essentials, but both turned up a clean machine.

Has anyone else experienced anything like this lately?

Thanks,
Vinnie

A:File Open or Choose File dialog hangs application after selection made

Figured this one out... It turns out a network attached drive was not on for some reason and I had a drive letter mapped to it. Once I turned the drive back on, the hanging symptom went away!

Read other 1 answers
RELEVANCY SCORE 23.6

Hello world. I have an important problem. I can't open, use or even preview files that the name of those files are colored in green. (like this)First, I would serve a chronology:- Before I reformatted my computer to windows Vista Starter SP1, I am using Windows XP Pro SP3.- Back when my Operating System is Windows XP Pro SP3, my hard drive is partitioned into two (C:/ and D:/).- I put some files (pictures, documents, apps) on one of the drives (D:/).- I tweaked the folder of the files' properties(security tab) and applied some changes in its security/sharing etc. It made a process like "applying the setting" which after that, - The name of the files and folders/subfolders turned into green!(like this)- I did this because there are multiple users on my computer(cousins) and I don't want them to mess up with my files.- I didn't see anything wrong in doing that I supposed, so I just left those files to stay that way (like this) ---- this part is the problem part ----- I finally decided to upgrade to Windows Vista Starter SP1 operating system. I installed it in the C:/ partition of my hard drive.- The files in the other partition (D:/) stayed there untouched.- I tried to insert a picture in a document, that "picture" would be a file that I am talking about a while ago, the file in drive (D:/) which its name is like this- Unfortunately, it said something like: "WORD CAN'T OPEN FILE: FILE PERMISSIONS NOT ALLOWED"- I was astonished! For... Read more

A:Cannot open, edit, preview, file from drive partition: file access not permitted

Are you the Adminstrator (with a set password)?

Read other 17 answers
RELEVANCY SCORE 23.6

I need convert/save Excel files into the ASCII comma delimited text files. It needs to be in this format in order to upload healthcare data to the CDC (NHSN).

Thank you.
 

A:How to convert/save an Excel file to ASCII comma delimited text file

File - Save As. Change Save as type option at the bottom...
 

Read other 3 answers
RELEVANCY SCORE 23.6

Boot sector of hard drive went bad. Putting new drive in. Does anyone know how one can use the old drive as a "slave" drive in an attempt to recover files from the bad drive? Does anyone make a HD cable or adapter for laptop computer hard drive?
 

A:Compaq N600C laptop hard drive file cale for file recovery

Hi Al

If the laptop uses a standard IDE laptop connector you can buy an adaptor like this to hook the laptop hard drive up to a standard PC IDE port.

http://www.myxtech.com/p/1857.html
 

Read other 1 answers
RELEVANCY SCORE 23.6

I opened a PDF file in notepad then in Word, now all PDF in my windows explorer shows a Word-like icon and file opens automatically in word.  I checked folder options and rebooted the machine, but it still shows that icon.  

How can I get the PDF file type icon back and file opens in Adobe automatically?
Thanks for any tips!

A:How can I get PDF file type icon back in Windows Explorer after I opend the file in Notepad?

Found it -
Control Panel > Default Program OR  Start >Default Program (if the shortcut already there) > select PDF file type and change default file association > pick Adobe 

Read other 0 answers
RELEVANCY SCORE 23.6

I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in: http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed, no? Or is there a way out somehow?

Thanks to anyone who's been there and can help...

BTW I have the XP installation disk that came with, and a diagnostics disk which I have not yet run.

Jeeb
 

A:Blue Screen: Registry File Failure; can't copy corrupted file to tmp directory

Never mind, I had it wrong--didn't read the document referred to above carefully enough. The procedure worked like a charm, and the document is very easy to read and entertaining to boot! (pun intended).

The document describes a procedure that closely follows a Microsoft KB document (which I now can't find) but does not contain any warning regarding whether the OS is an OEM (original equipment manufacture) install or not. The Microsoft doc says not to use the procedure on an OEM-installed OS, but I just did it on my Dell, so that warning seems to be incorrect.

Many many thanks for the help provided by this document and this site.
Jeeb
 

Read other 1 answers
RELEVANCY SCORE 23.6

Well, where to put this strange problem? XP, Office or Network Forum. All three seem to be involved somehow.

What gives?

I have a few large Excel files on
a) a share on a Win XP SP2 desktop
b) a share on a WIn Vista desktop
c) a share on a Ubuntu 6.06 desktop

When i mean large, i mean ~75Mb

When i work on my laptop (Win Xp SP2, 1Gb Ram, 1,86 GHz), i can access all shares just fine. But when i right click such a large Excel file on the XP or Vista computer and click 'Properties', my laptop becomes unresponsive for about a minute. Then, at last, the properties are shown. In the Taskmanager, on the LAN tab, it shows that my LAN connection is swamped at 70% for a whole minute. Sniffing the network traffic learns that the entire contents of the file is being transferred through the network to my laptop!
Just to see the properties...

However, when i right click the same file on a Ubuntu share, the properties come up instantly.

When i right click other large files on the XP/Vista shares (like *.iso of *.avi files), bingo, properties pop up instantly.

When i right click the large Excel files on the Xp/Vista share from a Win 2003 server (without office installed), voila, properties show up instantly.


So why is the whole Excel file transferred by just right clicking it for properties?
I'm convinced this behaviour adds to slow file share performance in general. For example, if i want to copy such a large excel file form the XP or Vista share, it takes 10... Read more

A:Right clicking a large Excel file in a network share makes the entire file being sent

sounds to me like your computer doesn't have much ram.

how much ram does your computer have?

Christian Dude

Read other 13 answers
RELEVANCY SCORE 23.6

So I opened an Office Writer attachment (.odt) from an email and made edits to that document. I hit save but not save as.Tried to open the file the next day but it got deleted. I did some research and realized that was stupid and looked everywhere for advice. So I've gone into temporary internet files folder and I cant find it there. I had deleteted my internet browser history yesterday. Following some random advice on the internet I tried to restore my browsing history by downloading som index.dat reader. Needless to say I am so completely lost. I just need to know if its even possible to recover it. Im willing to goto any computer shop and pay whatever it cost at this point. Oh and the exact message I'm getting is:

C:\Users\Paul\AppData\Local\Microsoft\Window\Temporary Internet Files\Low\Content\poli352a[1].odt does not exist
 

A:Need a file from temp internet file but I accidently deleted browsing history

First, download the free Process Explorer.

Run Process Explorer.

Open your e-mail program (mine is Outlook Express).

Open your e-mail message.

Open your attachment (Office Writer attachment (.odt)).

Inside Process Explorer, right-click the new process (from the application used to open that attachment).

Select Properties...

Select the Image tab.

Look inside the Command line bar.

You'll see the exact path to the temporary folder created for the attachment.

Make sure to check "Show hidden files and folders" and uncheck "Hide protected system files" in Folder Options.

Only copy the part from C:\Users to Content.IE5.

Note: a new folder number is created each time you open an attachment (e.g. IGSDF94V)

Example:

"C:\PROGRA~1\MICROS~2\Office10\WINWORD.EXE" "C:\Users\Owner\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\IGSDF94V\Example.docx"

Paste that path inside the My Computer address bar and click OK.

You'll have to look inside each folder manually for the name of your document. The folder number will be different from the one you're seeing inside the Command line bar in Process Explorer.

Do not run a Search. Look very carefully inside each folder. It should be there!
 

Read other 2 answers
RELEVANCY SCORE 23.6

I'm trying to open in Excel 2010 a file with .exf extension that is always a pipe delimited text file. I have set, using Windows file associations, to open this type of file with Excel. But, I would like for it to recognize that it is pipe delimited, so that I don't have to click on Delimited, Other, "|" to import the file. Any ideas? I also thought about using a macro to save some steps as well. Thanks for your help!
 

A:Excel import pipe delimited file based on file extension

Hi, welcome tothe forum
Macro is the solution, just start the macro recorder, give it a name and do what you do, stop the recorder and you have the macro.
Simple as pie
 

Read other 3 answers
RELEVANCY SCORE 23.6

Here's a wierd issue our office has been having. We upgraded the Server (Entire Unit w/Server2003 SBE) a while back and installed McAfee AV v9 on all our PCs (All updates done etc). I have disabled Worm Blocking on all the McAfee AVs (AVG is installed on the Server).

The reason we disabled the McAfee Worm Blocking is it doesn't play nice with networks and we were having tons of issues.

*We still get the occasional random file going missing or getting changed to what seems to be a temp file. Example: file.xls is opened gets worked on then gets saved. Go back to see the file and find it's been changed to ~file.xls or sometimes just ~74389758943file.xls.tmp or some junk. Sometimes can get it back by just renaming othertimes it's toast and cannot be fixed. This seems to be with .doc and .xls, not sure of others since they mainly only use excel or word files.

Any ideas? Anyone seen this issue. These files are stored on the Server and for the most part opening, working on and saving has been fine. Seems to be random and effects everyone not just one particular person.
 

A:Network File issue: saves back as temp not the real doc/xls file???

Read other 8 answers