Over 1 million tech questions and answers.

Updating BIOS

Q: Updating BIOS

Basically I want to flash my Bios, but the thing is... I am not sure which I have to choose! is it all of them? do I choose the latest one? I am lost.

Bios updates: http://www.gigabyte.com/products/product-page.aspx?pid=3863#bios
Motherboard: GA-Z68A-D3-B3 http://www.gigabyte.com/products/product-page.aspx?pid=3863#ov

your help is really appreciated.

(p.s. if I am correct, my current version is F3. Not even listed!)

RELEVANCY SCORE 200
Preferred Solution: Updating BIOS

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Updating BIOS

You only choose one and that is usually the latest one.

That said, are you having a problem that you hope the BIOS update will fix? If not, see the warning:

"Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction."

Read other 4 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 49.6

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 49.2

Hello.I need to update BIOS on my notebooks.I used my second computer to creat  a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI!  2. BIOS did not support InsydeFlash!  Please help me.

Read other answers
RELEVANCY SCORE 49.2

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 46.8

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 46.8

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 44.8

I just got a 250Gb Western Digital Hard Drive and it is read by the computer but it won't let me access it. I was told that updating the BIOS might help, but i am not sure how to accomplish this. If you have any other idea on what might help or how to update the BIOS plese let me know. Thanks in advance for any help given
Stephen
 

A:updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

i just got a new ram for my pc. and the ram speed 2400MHz but my pc default 1333 MHz so i tried to chang the clock timing and the voltage of the ram but my BIOS is so old it didnt alow me to do that. is there any other way i can get to change my ram speed that i paid for.

A:updating Bios

kerlos28 You can NOT clock the RAM at speeds your processor will not support, and without specific model information of your PC, I can not see what speeds it will allow. So please follow these instructions:  Finding Your HP Product Model Number | HP® Customer Support We can proceed once you provide the information.Thanks

Read other 1 answers
RELEVANCY SCORE 44.8

hi, I'm new here, and need help updating my bios, i know my way around a computer a bit, but this has got me stuck, i have no floppy drive, so thats out of the question, i just bought a CD burner, tried that once didn't seem to do anything, may have burnt it wrong i really don't know, could use some step by step instructions
the motherboard is an abit IB9, i have already found the correct update for it, any help would be greatly appreciated
 

A:updating bios, help

Is there a specific problem with your board that a BIOS update corrects? If not, I would leave it alone.

Here is a link from Abit that explains the flashing process in detail.

http://www.abit.com.tw/page/en/download/guide.php

Additionally, it is reported that Abit ceased motherboard manufacture at the end of 2008. If you should encounter a problem with the flash and need to RMA the board you may or may not be able to do so. I would proceed with caution.

http://www.tomshardware.com/news/abit-motherboard-exit-universal,6278.html

http://www.pcworld.com/article/155869/motherboard_manufacturer_abit_dead_sortof.html
 

Read other 2 answers
RELEVANCY SCORE 44.8

How do i update my bio i can't seem to find anything to help me

A:Updating the Bios

@Dctchdt,If the original OS was WIN 7, the BIOS is tied to that.  The is "NO" WIN 10 BIOS.

Read other 1 answers
RELEVANCY SCORE 44.8

I'm really not sure if I should update my BIOS or not. I'm trying to optimize my Windows 7 x64 and get it updated. I've been following this tutorial, Optimize Windows 7, but I'm unsure weather or not to update my BIOS.

I have an ASUS M5A97 R2.0 motherboard, and I haven't had any problems with it. However, I noticed I'm running version 1006 from 10/17/2012. The latest is 2301 from 3/27/2014 and it improves system stability (not to mention the countless updates and fixes between versions 1006 and 2301).

Plus, there's some chipset drivers for AMD and I've been having problems getting my CCC started.

So... should I update or not?

A:Updating the BIOS?

Read the BIOS notes for the fixes it provides. I do not recommend updating the BIOS unless it has a fix for your issue.

Read other 9 answers
RELEVANCY SCORE 44.8

when im done building my pc and installing the os, do i need to download all the updates for the bios that were released? or just the most recent one. because im confused that if i download the most recent update, it wont fix all the bugs that the updates before it fix
 

A:updating bios

Read other 8 answers
RELEVANCY SCORE 44.8

I hope this is the right area to post my topic in but I have a problem

I Need help with updating my BIOS but don't know where to go, or what to do.

I don't want firmware from ESupport because they charge $40.00 an upgrade and I can't afford to upgrade my BIOS, and keep upgrading

I use a Soyo computer

This is what my BIOS agent said:

Award Modular BIOS v6.00PG

03/08/2002-8361-686B-6A6LNS2AC-00

K7VEMPRO-2CA4

VIA 82C3112 rev 0
 

A:I need help with updating my BIOS?

You go to the Soyo website and download the BIOS for your exact model of motherboard (looks like a SY-K7VEM Pro). Soyo also provides instructions how to actually flash the BIOS.

Do you really have to upate your BIOS? One false step and your motherboard may become a useless slab with colorful bits on it.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Not sure if this is the right subforum.  System specs: Model: HP Pavilion p6522f desktop PCProcessor: AMD Athlon II X4 635 2.9 GhzMemory: 8 GB RAM installed  (2 sticks x4)GPU: Nvidia GeForce GTX 560 graphics card Motherboard: CPU-Z tells me it's a "FOXCONN" model "2A92 1.01" and the BIOS is American Megatrends Inc. v 6.09 09/07/2010. My BIOS seems very out of date (3 years old) and I would like to update it. I use this computer for gaming, and Borderlands 2 is unreasonably laggy even on mid/low settings, and I've read in multiple places that making sure the BIOS is updated is an effective fix. How do I go about doing this? What's the right .exe to download and run?  













Solved!

View Solution.

A:Updating my BIOS?

Hi, You can find new BIOS up to 8th May 2013 on the following link:    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4254837#N682 Regards.

Read other 6 answers
RELEVANCY SCORE 44.8

Hey all,

I have the MSI K7N2 Delta mobo, which is supposed to have a 400FSB, but when I set it up in the BIOS, it will only go to 200. I saw an update on MSI for that board, which I think may fix that problem, so I downloaded it to my desktop. How do I go about applying the update? I didn't want to just double click the file and see what it does, instead, I decided I should ask the experts here at TSG first.

Thanks,

PaveFE
 

A:Updating my BIOS....how do I

Read other 12 answers
RELEVANCY SCORE 44.8

Hey, my laptop has been giving me some pain recently with BSODs when exiting Source games. I've also been experiencing performance drops in these games and in others which were all fine some time ago. Steam support suggesting updating my video and audio drivers (which I did) but they also said I should update my BIOS.

I have never updated my BIOS before and want to ask what and where should I get an update for my laptop, how to apply it and things I should be careful about. Also, would this void my warranty?

The laptop is an Acer Aspire 5742ZG
OS Windows 7 Ultimate x86
CPU Intel Pentium P6100
Motherboard Intel(R) 5 Series/3400 Series
Memory 3 GB DDR3
Graphics Card(s) NVIDIA GeForce GT 420M

LE: Also, while we're on the subject, do you have any good reads on BIOS updating and when it should be done? It's unexplored territory for me

A:Need help updating BIOS

Hey, first thing you need to do is type msinfo32 in the Start button search/run box. In the window that opens, look up the field Bios version/date and tell us what exactly you see there. This tells you the version number and date of the currently installed bios. By knowing this it can be determined whether an update is actually applicable.

Bios updating used to be a dangerous business in the earlier days but with better and more user friendly tools its quite OK, as long as you take certain precautions. However, do remember that no matter you do everything right, theres a very small chance that your mobo can get bricked, so the responsibility is all yours.

Not trying to frighten you, just need to be careful and be prepared.

Read other 9 answers
RELEVANCY SCORE 44.8

i have a nvidia geforce 9600 gt grahic card 1gb ddr3

i just wanna update its bios.
just to fix bugs.

plz tell me from where to download bios update?
 

A:updating bios

Read other 16 answers
RELEVANCY SCORE 44.8

Will updating an A-Bit BIOS to the latest BIOS remove any Virus that is in the BIOS. And what BIOS Viruses are out there and what can you do to get rid of them?
 

A:Updating BIOS

If your BIOS is infected overwriting it with the latest version of the real one will overwrite the problem. Most of these however render your PC useless to the point you cannot even boot. SOme of the names are Chernobyl, PE_CIH, Win95.CIH, Win32.CIH, W95/CIH.1003, CIH.Spacefiller
Most AV sites have removal tools
 

Read other 1 answers
RELEVANCY SCORE 44.8

Can anyone set me in the right direction on what I need to do to update my bios? I am running windows 95 4.00.950b on a Compaq 575 Deskpro with 32 ram and a screamin 518 megs of hard drive.

I have run a Compaq Diagnostics Version PC10.19A and it shows these ROM Revisions that seem older than dirt:

System ROM
Revision: 05/20/1998
Family: 486G
Video Controller ROM
Revision: 12/01/1994
Family: V1
Keyboard Controller ROM
Revision: C.7 06/14/1991
Family: K

I downloaded and ran one of those utilities that tell you what you have on your system and it couldn't even recognize my bios and told me I needed to update it so I thought I would give it a try...

While I got you here (and if I need to address this in another thread I will) In my controll panel / system/ Devices /hard disk controllers I have 2 "Standard IDE/ESDI" listings...as far as I can tell they have diferent input/output ranges and IRQ's...I THINK I remember reading somewhere that this could be a problem...any light you can shed on this cunundrum would be appreciated.

Thanks..you guys are the greatest and btw with your help I finnally found that graphics controller I was looking for and it seems like I have a new computer...WOW..."look at the colors man"(Dennis Hopper-Easy Rider)
 

A:Updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

Im upgradeing my asus mobo p5b to the newest bios which is P5B-0701

now how do i install it some one told me about the utlities im on xp pro sp2 please help me thanks i need to upgrade it soon
 

A:HELP updating bios

Bump.......
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hello, My laptop is Pavilion 15-e017tx Notebook and i need to update the bios. After downloading the .exe file in the installation wizard it showed "options for creatin partition as recomended  " & "proceed without creatin the partition".What should i do. I dont have the recovery parition drive in my laptop as i formatted it by mistake. What shold i do. Or can i proceed without any partition create and i want to know actually what is created in the partition. Thanks

A:Updating Bios

 Your laptop with Windows 10 installed has no updates for anything including the BIOS. Only updates for Windows 8x and 7. The latest BIOS version is F.24A I have updated BIOS a number of times but have never come across the installer asking about creating partitions.

Read other 5 answers
RELEVANCY SCORE 44.8

Hey everyone how do i install my latest bios from my manufacture, i cant get the flash bios to work?!!? heres a link to my mobo. The flash thing to install bios is like a comand promp but it starts then closes itself! what can this be? thankyou in advance
 

A:Need Help Updating BIOS

be extremely careful when updating the BIOS. Not completing the BIOS flash will render your motherboard a paperweight. You will then have to send it in to get the BIOS reburned on the EPROM.

Most manufactuers have explicit instructions on their websites for updating BIOS files. There is a dos file to do this usually. BIOS updates cannot be done through windows. Use your floppy drive.

basically you type the name of your flash program, followed by the name of the new BIOS file.

LET IT RUN ITS FULL COURSE. DO NOT INTERRUPT.

also SAVE your OLD BIOS. Most BIOS flash programs have this option. Save it to another floppy disk. You might need it if you run into problems.
 

Read other 7 answers
RELEVANCY SCORE 44.8

1.Please use the prepared boot disk to boot into DOS mode. Then, type in the following commands?

afudos /i For example, afudos /ip4c800b.rom,


refers to the fullname of the BIOS file. The following shows the procedure of BIOS refreshing.
_________________________

How do I find out the fullname of my BIOS file? I typed in the given one, but it said error: can't open rom file.
 

A:Need help on updating my BIOS

The file is on your floppy. Just look at the contents with the dir command or browse the thing in Windows or whatever.
 

Read other 2 answers
RELEVANCY SCORE 44.8

I would like to update my BIOS. However, there is no download available for my computer and operating system on the HP site. 













Solved!

View Solution.

A:Updating BIOS

Hello, The BIOS update is available for WIN 8.1 and not yet tested and released for WIN 10 as of now. However you may try updating BIOS using HP support Assistant(HPSA)Download and install from here : http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl_ot_ob_ds_pd/hpsupportassistant_cc/dt#.WEY3fdV974Y Also please go through this document explaining how to use HPSA.http://support.hp.com/us-en/document/c03467905  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 2 answers
RELEVANCY SCORE 44.8

I want to update my bios to see if that helps my rebooting problems(See thread below). The only problem is, I'm unsure which upgrade is for my bios. I have an AX4TII mobo. When I run the app HWInfo32 I get this info on my bios:

Vendor: Award software international
Version: 6.00 PG
Release date: 01/02/2002
Start Segment: E000
Size: 512 KBytes

This link is to my mobo's site and their bios drivers:

http://club.aopen.com.tw/downloads/...eyword&sel=category&optionfun=typefun&first=1

Which one is mine?
 

A:Updating bios

Read other 10 answers
RELEVANCY SCORE 44.8

I have:
American Megatrends
BIOS date: 04/25/01
BIOS ID: 62-0425-001437-00101111-071595-SiS730S-M810LR
Chip Set: SiS 730 rev 2
OS: Microsoft Windows XP Version: 5.1.2600
CPU: AMD 1.2 GH

What do I need to update my BIOS

Thanks in Adv...
 

A:Updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

My board is Asus M2A-VM HDMI. Latest version bios is avilable ie. HDMI1401. Kindly help me to update. I dont have a floppy drive. I want to do through CD. What r the steps to update
 

A:Updating Bios

Hello kunjikaly and welcome to Techspot.



While BIOS flashing can be done with CD ROMs on some newer motherboards, this is not recommended. This is because BIOS updating works at the core level of computing functions.Click to expand...

Taken from here by Tedster.

Regards Jase
 

Read other 6 answers
RELEVANCY SCORE 44.8

Hi it seems that I have a problem with my SATA II speed settings. Apparently this might be due to a lack of BIOS / Motherboard support for SATA-II - is there a way to check for this? I mean, I can check the BIOS settings, but I dont see any particular reference to SATA-II - Is there a resource to cross reference my particular BIOS generation or type to see if it does allow SATA II? Thanks!

A:Updating BIOS - should I do this?

It seems that my BIOS might not support SATA II If is does not, can I, should I - upgrade my BIOS? (My laptop is about 1.5 years old now - should it have SATA II installed in the BIOS settings?) Thanks!

Read other 9 answers
RELEVANCY SCORE 44.8

Hi. Will the bios in my PC ever need to be updated? How will I know the signs of it. My PC is about 7 years old now.
Reason I ask is my friends PC that is a 4-5 year old DELL had a message that the bios was out of date, and I updated it for her by following the prompts.

I don't even know what a bios is....should I worry about my PC?
 

A:Updating Bios

The best rule to follow is,if it is work OK it doesn't need updating.
 

Read other 2 answers
RELEVANCY SCORE 44.8

So lately i have been thinking of updating my BIOS now first of all how do you know when its time to upgrade and how does one go about doing this process. I have the Asus P8H61 MLE/CSM. Any insight or help is appreciated

A:Updating BIOS how and when

Unless there is a specific problem you're trying to fix, and you know for certain that the BIOS upgrade will fix that, do NOT do a BIOS update. This is nothing like apps version updates or driver updates. If something goes wrong during the BIOS update, your machine is turned into an electric brick.

My advice to folks is to NOT do any BIOS updates unless you are sure of the following:
1) You have a way to store off the current working BIOS code to a media that can be used to restore it
2) You have a way to restore that saved BIOS code if the update goes badly.

That said, ASUS board I have used in the past had something known as EZ-flash (or something like that) that involved you booting with a special key combination that then launched a BIOS update utility. You could then stick in a diskette or a USB stick and save off the current BIOS. IF that utility still exists with your motherboard, it will be explained in the manual that came with it.

Read other 2 answers
RELEVANCY SCORE 44.8

Hi all,

My PC seems to keep turning itself on after I power off and apparently a common issue is that you need to update your bios.

My Motherboard is GIGABYTE GA-78LMT-USB3 AMD 760G (Socket AM3+) Micro-ATX Motherboard. Using System Tools I've found out that my BIOS version/date is "Award Software International, Inc. F2, 10/08/2012".

I think I've discovered the correct motherboard on this site

This is how far I've got - unsure what I need, or should download from the options there (and even if I have the right site). Obviously I'm really cautious about all of this so would really appreciate any help or advice?

cheers

Scam

A:Updating my BIOS?

Hi,

Its a good idea to be cautious. Please check on your motherboard to see whether its a Rev. 4.1. If it is, then that is indeed the BIOS to download and install, and that is the correct site.

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 44.8

Hello

Probably a very naive question but I'm wondering how I can update my BIOS (if an update appears) when my PC doesn't have a floppy (A drive? Most of the accounts I've read on the website for the motherboard (ASUSTek) are confusing and involve copying a file onto a floppy for reboot.

Is there another (simpler) way?

Thanks
 

A:Updating Bios

Most new machines have updaters that run in Windows. If the file needs to installed from DOS, like a floppy, it can be installed from a bootable CD that boots into DOS, like the Win98 Boot CD Image that has had the BIOS files injected into its image.
 

Read other 2 answers
RELEVANCY SCORE 44.8

Hiya doin' CHILL here, I need to know how to update my BIOS for my E-machine W3623 System. The BIOS is very outdated (7/29/2005) which I think maybe causing certain performance issues I have been having. I at least want to have the most recent BIOS running for the machine (for optimal performance) which I have already looked into (which is the Coconut Creek CR94510J[1].15A.1015 2009). I realize this update MUST be downloaded straight from the manufacturer ONLY or I could risk screwing myself over.

I downloaded the file from the E-machines support site. Problem is, when I try to run it I get the Intel Express Update Set-up screen which comes up and then it says "This program is unable to continue. Internal System Error: This is a programming or internal problem." After that I can't continue and the process automatically shuts down. So now I'm stuck and don't what know to do. Here is some more information about my system:

Operating System: Windows 7 Ultimate 64x
Intel Express Family Chipset 82945G
RAM: 2GB

Also another side question: Is this unit capable of more RAM than 2GB? Thanks in advance and I would GREATLY appreciate any help I can receive on this as I am lost. Let me know if you need anymore specific specs on the system.

A:Need BIG help with updating BIOS

Welcome to SevenForums,

Performance issues aren't necessarily fixed up updating the BIOS. You are running a fairly low-spec PC so I wouldn't expect the performance to be outstanding. What sort of issues are you having? There may be easier way to fix this.

That is the correct BIOS update - how are you flashing the BIOS?

Unfortunately, your machine supports a maximum of 2GB only.

Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 44.8

if anyone could help me on updating my bios it would be most appriciated. here's any vital information needed and if i left something out, please let me know and i apologize..

manufacturer: American Megatrends
bios rom size: 256k
bios id: 62-1030-009999-00101111-040201-VIA_K7
chipset: VIA 82C3189 rev 0
 

A:Need Help Updating BIOS

http://www.techspot.com/vb/showthread.php?p=120976&posted=1#post120976
 

Read other 1 answers
RELEVANCY SCORE 44.8

I recently put in a new motherboard, a new cpu, and new ram. the computer POST is fine but when it gets to the load windows screen, it just reboots. there is no error, just flashes to a blue screen, then restarts the computer and when it restarts it comes to the screen asking me to choose between restarting in last known good configuration, or in 3 different safe mode options. all of them just repete the process. i tried reinstalling the windows from the boot cd and it reinstalled it fine with no errors, but when it restarts the computer it still wont get passed the load screen. Someone sugested that maybe i have to update my BIOS becase of the new motherboard and new cpu. can someone please explain why that might be, what the symtems are of needing a BIOS update, and why it would help me? im just looking for some clarification before i run such a risky procedure. thank you, kevin
 

A:Updating BIOS

Did you reinstall windows after fitting that lot? If not, thats your problem.
 

Read other 41 answers
RELEVANCY SCORE 44.8

 I did a F10, check my BIOS version is HP Kolvo02.25, 07May 12.I download a 2013 bios in HP support centralhttp://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_113732_1&sp4ts.oid=5232881run it and restart PC, F10 again. When i Flash System Rom, a red label appear 'Removable media is bad or missing'I switch off the PC, press the CMOS button few times. And the results is still similar. I did the instruction as the video instructed, but BIOS did not upgrade either.http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.sn=SGH250SGL4&sp4ts.oid=5232881&docId=emr_na...

Read other answers
RELEVANCY SCORE 44.8

I need to update my Motherboard Bios. I found the site and downloaded the Bios file. I was cautioned by the Motherboard site to first make a copy of my existing Bios. Just how do you do this? How do you get to look at the Old Bios to copy the file name down or even copy it to a floppy?
I'm runnging Win 98 SE on a new ABIT motherboard.
 

A:Bios Updating

Read other 9 answers
RELEVANCY SCORE 44.8

I've been trying to update my BIOS as I realised how old the driver is, but I useless, as they tell me to download programs that cost and I just cannot be bothered to go through all that.

Could anyone give me a link to where I can just download an update please?

A:Updating my BIOS

Try here, this is the driver page for your computer model number listed in your specs. Notice the OS says Vista but if its a BIOS update the only relevance of the OS is weather the flash utility will run in Windows 7. All the other drivers listed are for Vista. This could be the correct BIOS for your machine but a second opinion would be most welcome to confirm.

P.S Run at your own risk as we all know the risks of incorrect BIOS updates. Check the motherboard show to be P5LP-LE before flashing.

Read other 2 answers
RELEVANCY SCORE 44.8

hi there

i want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance

i have bios ver 1.20

can i use the last bios update 1.70 ? or i have to download all the previous updates first

what i mean is the update cumulative ??

thanks

A:about updating my bios

You only have to update the BIOS if you have a problem with the machine. I wouldn't advise you to update the bios becaause you only update the bios if you have a instability problem that warrants a BIOS flash or installed newer hardware that supports the mother board but its unable to boot with the newer hardwareFor exampleI bought a newer CPU (AMD 6100FX) with a newer motherboard socket AMD 3+ but when i installed it it didn't boot up because the CPU was newer than the manufacturer motherboard bios so that warrants a BIOS update. I look up your board and you have some newer versions of the bios but the current bios only improve windows 8 compatibility. The bios is a cumulative update you have to read the documentation for the exact BIOS version because you cant really tell what changes in these updatesBIOS updating can be risky because if you have experience a power issue or event your computer can become a paper weight

Read other 11 answers
RELEVANCY SCORE 44.8

I'm trying to update the BIOS on my ASUS mobo. I've got Afudos and the newest updates, but I don't know how to put them together.

I was trying to use the DOS version and it told me

Usage: afudos /i<ROM filename> [/o<save ROM filename>]

The ROM is called P4P8SE06.ROM

I typed "afudos /i<d:\downloads\ASUS\Updated BIOS\P4P8SE06.ROM> [/o<save d:\downloads\ASUS\Updated BIOS\P4P8SE06.ROM>]" but it didn't work.
 

A:Updating BIOS

http://support.asus.com/technicaldocuments/technicaldocuments_content.aspx?no=546&SLanguage=en-us

http://support.asus.com/technicaldocuments/technicaldocuments_content.aspx?no=541&SLanguage=en-us
 

Read other 2 answers
RELEVANCY SCORE 44.8

Wanted to know if i did a BIOS update can it be easily reversed in case of a failure. Some say by re-flashing the old BIOS back in, some say you need to remove the battery inside case and put it back in while pushing the power button and some say way in BIOS to set it back to default BIOS.

I know it is not important to update a BIOS if there is no major changes to a new one or if you are experiencing hardware compatibility problems because it can brick the MB. I thought it may add some features i do not have for RAM and UEFI.

Although i did it about 4-5 months after purchasing this system and it worked fine. When i go back now and look at the manufacturer's site under my model number PC it lists all .CAP BIOS 's, except for one i have now and below that one on list are .ROM. My version BIOS is 4101

My system uses a .ROM BIOS and it is told to you on the site from list of the systems BIOS's , not to use .CAP if have a .ROM one.
What is weird when i go to the Motherboard on same site instead of the system model, version numbers of each BIOS do not correspond to the version numbers of the system model, but the MB BIOS's are all .ROM ones.

I posted both links plus when i purchased the PC it was with Windows 7 64bit Home Premium, i upgraded to Windows 8.1 Pro 64bit.
Why i am looking at the Windows 7 64bit chose on each link, actually same on Win8.1 .
First link is System, second is the MB. Any advice or ideas be much appreciated. Oh, ASUS wasn't that sure or helpful once be... Read more

A:BIOS Updating

The windows 8 BIOS file is the last one you could use. the .CAP is for mother board that came with Window 8 installed. You stated yours came with Windows 7 so as the Win 8 BIOS driver say's is only for Mother Board that came with windows 8.
So that solves you problem. It would be foolish of you to update your BIOS unless you know there is a updated feature that you need. Otherwise it is hazardous to your computer. Is you do be sure to extract the downloaded BIOS directly to a Fat 32 USB Stick. Then use the Ezflash in the BIOS. Doing it this way is almost 100% success, Winflash is less that 50% and lots of bricked notebooks. Not all the sure on Mother Board but seem like in the old days you could pull the BIOS Battery and that would set the BIOS back to original version.

Read other 19 answers
RELEVANCY SCORE 44.8

Board: ECS K7S5A 1.0
Bus Clock: 66 megahertz
BIOS: American Megatrends Inc. 07.00T 04/02/01

Thats my motherboard spec, i recently aquired a amd athlon 3000+ but my bios only sees it as a 1500 / 2100 + so want to update my bios but am very unsure and wary on doing so, from the official site ive found the utility and update but as my bios version says 1.0 and the update only says 3.0 and above im not sure if itll work, does anyone know what i should do?

Thnak John
 

A:Updating Bios

Read other 14 answers
RELEVANCY SCORE 44.8

Hello,today i  wanted to update my bios (from "P02-A2" to "P03-A3) because i want to use my new processor - intel i7 3770, but after start updating i got sad massage "Rom file size does not match existing BIOS size".I have got a predator g3610 and i was installing it through DOS by using pendrive.What should i do now?

A:Updating bios

P03-A3 BIOS description says:BIOS (for device with Ivy Bridge & USB 3.0 supported) has your Predator the Ivy Bridge microarchitecture? i don't think you can update P02-A2 version to P03-03, the BIOS flash is telling that, different ROM size.

Read other 6 answers
RELEVANCY SCORE 44.8

How risky is bios updating. asus sabertooth x58

A:Bios updating

ocir, your motherboard site shows that the latest bios is:
Sabertooth X58 1304 BIOS
2011.09.26 update

I would download the update and most bios system updates have a choice to accomplis from booting a disk
or from the Windows OS.
Choose which you want to do,

I have done this lots of times, mostly from Dell but also intel and asus.

Rich

Read other 5 answers