Over 1 million tech questions and answers.

Bluetooth frequencies conflicting

Q: Bluetooth frequencies conflicting

Hi y'all,
I recently bought a bluetooth adapter for my speakers, so that I can play from my phone or PC without connecting cables. Works great, except that on the PC my bluetooth mouse conflicts with the speaker -- when I move, click or scroll the audio pops and cuts out. I'm guessing it's because they're on the same frequency, but I'm wondering if there's any way I can adjust that so that they don't conflict. Any help is appreciated!

RELEVANCY SCORE 200
Preferred Solution: Bluetooth frequencies conflicting

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Bluetooth frequencies conflicting

Are you using the same BT adapter for both the speakers and mouse?

Read other 4 answers
RELEVANCY SCORE 65.6

My Windows 8.1 laptop, fitted with an Intel Centrino Ultimate-N 6300 AGN wireless adapter, suddenly stopped automatically connecting to my router a few months ago. I attempted to connect wirelessly to multiple other routers, all to no avail. My laptop could only connect through an ethernet cable/tethered hotspot. I then moved houses and got the internet set up on a new provider and suddenly my laptop could connect wirelessly again! Sadly, after trying to connect to my university's wi-fi, I found out that the laptop wasn't fixed, it was simply able to connect to my new 5Ghz internet but still had trouble connecting to 2.4Ghz access points.

I've tried everything I can to fix this as my laptop is too vital to my studies for me to be without it even for a short period of time, therefore sending it off for diagnostic and repairs is out of the question for now. So far I have tried:

Installing the latest Windows 8.1 drivers for the card (currently on v.15.14.0.2)
Replacing the wireless card with a new one (same make and model)
A complete, fresh re-installation of Windows 8.1

Running out of ideas on what to try and so turning to the community for help. Even if you're not sure of a fix, determining the problem itself would also be a big help. Thanks much in advance!
 

A:Laptop can't connect to 2.4Ghz frequencies, only 5Ghz frequencies

Try the latest wireless driver from the laptop manufacturer's web site.

If that doesn't work then try the latest driver directly from Intel's site.
 

Read other 3 answers
RELEVANCY SCORE 45.6

Hey all, this is my first post here, its great to be here!

Anyways,

I just purchased a new motherboard, cpu, and memory (wanted to finally switch from AMD)
I purchased the Core 2 Quad 6600, Gigabyte P35-DS3P, and 2x1GB of Ballistix Tracer
I have Windows XP Pro w/ all current updates

The speed of the memory is DDR2 1066 (PC2 8500)
and my motherboard supports DDR2 1066 and dual channel memory

When I run CPU-Z it says Max Bandwith for each stick is PC2-6400 (400mHz)
The timings are :
Frequency 533mHz, CAS Latency 5

is the frequency correct? it seems slower, i mean my old pc-3200 memory was running at 400mHz CAS latency 2.5.

Just wondering what I would need to change in the BIOS, this mobo's got great OC'ing tools

Thanks for looking appreciate any help!
 

A:Memory Frequencies off

Read other 6 answers
RELEVANCY SCORE 45.6

Is it possible to pick up radio frequencies and interference on computers? I opened my Windows Media Player today and heard, very quietly, a talk radio show and was flabbergasted. It has never, ever, ever happened before. I don't listen to internet radio so I don't know what it could be. Completely dumbfounded over here.

A:Radio frequencies?

Yes, it is possible. Computers are an FCC Class 15, sub-part B product, which means that while they may not cause interference in other products, they must accept any interference caused by something else. That's why your PC can pick up talk radio. You were either picking up a local radio station, or something nearby was radiating that signal.

That's it in layman's terms. You can look up the officialese in your owner's manual if you like.

Read other 2 answers
RELEVANCY SCORE 45.6

a few months ago I assembled my PC,my Asus z270e board , this MB supports 3000mhz ram frequencies so I went up i was using that XMP profile
But I had problems for playing, crashes, freezes or close alone, in the end i can not play, this happend every 10 -30 min, sometimes when the game started, I thought it was my PC, so I format it, I uploaded and downgraded the version of Windows and nothing too, in the end by discarding I realized that this was the XPM profile.!! now im using the stock frecuencie yesterday, I played 24 hours without crashes everythings OK,!! so if my MB withstands these frequencies of 3kmh. why is it causing me problems?
Processor i7 7700
Mother: Asus Strix z270e gaming
Liquid cooling: NZXT KRAKEN X52
Ram: CORSAIR VENGEANCE LED KIT 2x8 / 16GB
GPU: ASUS STRIX 1070
Sent from my iPhone using Tapatalk
 

A:RAM Frequencies Problem

Indeed the board does but as is shown
4 x DIMM, Max. 64GB, DDR4 3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.)/3000(O.C.)/2800(O.C.)/2666(O.C.)/2400/2133 MHz Non-ECC, Un-buffered Memory
Dual Channel Memory Architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual CPUs.
* Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists

all except 2400 and 2133 are OC

Your processor
https://ark.intel.com/products/97128/Intel-Core-i7-7700-Processor-8M-Cache-up-to-4_20-GHz
Memory Types DDR4-2133/2400, DDR3L-1333/1600 @ 1.35V
supports those none OC at SPD - serial presence detect

So your ram although I do not know which exact model of Vengeance it is - as explained in your motherboard manual must when OC not only be configured alone for ram but as part of the sophisticated procedure on that motherboard - where if you wish you can simply use the 5 step automated process explained on your manual
Have you checked if your Corsair ram is on the QVL list from Asus
https://www.asus.com/uk/Motherboards/ROG-STRIX-Z270E-GAMING/HelpDesk_QVL/
That list cannot of course list all ram that will work with that board, but what is listed has been tested by Asus

This presumes the problem existed - not only on one or two games but across the board
 

Read other 2 answers
RELEVANCY SCORE 45.6

A couple of months ago, I built a capable gaming rig (E8500, ATi HD4850, 4GB PC-6400 RAM on a Gigabyte EP35-DS3L with Vista x64), and set it up. It was my first time building a computer from scratch on my own, but I made it and recently overclocked my CPU.

I intended to overclock it to 3.6GHz, and it looked like that in the BIOS but using CPU-Z, it reported it at 6 x 380.0 MHz or 2280 MHz. It does change to the 3.6GHz at times in the program, but never in the output file. I'm assuming this is because of some energy saving thing? The mobo did come with an energy saving program, but I disabled it and stopped it from starting on boot, but I guess I may have not gotten rid of it properly.

CPU-Z also reports that my RAM is PC-5300 (333 MHz x 2), even though the RAM was sealed (at least, it looked like it). My CPU-Z output file is attached, if you want to take a look at it.

Regards,
Cal
 

A:Unsure about CPU and RAM frequencies

Could you post pictures of your BIOS settings? First of all the frequency section... And then of other sections, so we could find the CPU slower option.
 

Read other 2 answers
RELEVANCY SCORE 45.6

a few months ago I assembled my PC,my Asus z270e board , this MB supports 3000mhz ram frequencies so I went up i was using that XMP profile
But I had problems for playing, crashes, freezes or close alone, in the end i can not play, this happend every 10 -30 min, sometimes when the game started, I thought it was my PC, so I format it, I uploaded and downgraded the version of Windows and nothing too, in the end by discarding I realized that this was the XPM profile.!! now im using the stock frecuencie yesterday, I played 24 hours without crashes everythings OK,!! so if my MB withstands these frequencies of 3kmh. why is it causing me problems?
Processor i7 7700
Mother: Asus Strix z270e gaming
Liquid cooling: NZXT KRAKEN X52
Ram: CORSAIR VENGEANCE LED KIT 2x8 / 16GB
GPU: ASUS STRIX 1070
Sent from my iPhone using Tapatalk
 

Read other answers
RELEVANCY SCORE 44.8

i'm curious what the different frequencies mean. does the higher frequency mean better performance, or what? Right now i have 2 gigs of 6400 in my comp but was looking to add more and wasn't sure if i should go with 8500 or just stick tot he 6400.

my mother board supports pc2-5300 pc2-6400 and pc2-8500
 

A:ddr2 sdram frequencies?

Read other 6 answers
RELEVANCY SCORE 44.8

The specs of my computer is in my signature. The freq. in which my ram is suppose to run is 1200Mhz. I'm trying to figure out how i can get it to actually run at that speed. When i go into the bios it allows me to either set it to auto or 400, 553, 667, 800, or 1066Mhz but nothing higher. When i set it to auto during startup it says DDR2 667 however when i set it to the 1066Mhz it says DDR2 400 during startup. How do i go about getting it to run faster?
 

A:Solved: DDR2 frequencies

it seems that your motherboard only supports up to ddr2 800. =P
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hey peeps!

I just bought another 8gb stick of ram to go with my other 8gb. Whats installed in there right now is the Corsair Vengeance LPX 3200mhz 8gb. The one i purchased is Corsair Vengeance LPX 2400mhz 8gb. My motherboard being a MSI Z170a sli pl. Will The 2400 mhz stick work with the 3200mhz? If so how would i go about installing it? Do i dual link it, or single? Go into bios set timings with the 3200mhz?voltage?
Or will putting in the Stick automatically adjust the to what it needs to be?
 

A:Installing Ram same brand different frequencies

It should work but both sticks will run at the lower speed of 2400MHz.

Are you in Poland ? (Looking online for your motherboard found only Polish websites).
 

Read other 3 answers
RELEVANCY SCORE 44.4

Good day Win7 Community,

This is my first post on here, as many users, I come here because I am having an issue.

I bought my new computer at friday.
I began installing my desired programs and games.
But as I progressed I found out something was going on with my sound.

I own a 5.1 surround sound speaker set so I'd like to use it, I believe I have stereo sound on it right now because I want my speakers to have sound all the time instead of having either music or voice-only.

On to the issue;

At first, I used my audio outputs of my motherboard, but that didn't really work well with my speaker set.
So I got my old 5.1 surround card (PCI) out and installed it into my new computer and plugged my speaker set, I could now use all 5 speakers.

I uninstalled the motherboard sound drivers and installed the sound card ones.
Fiddled with the settings the way I like it (sound volumes on each speaker)

I got it all working.. only, with youtube,WMP,VLC Mediaplyer, whatever produces sound.
When a high frequentie sound comes along, it gets scrambled which really ruins my fun of my new computer.

List of hardware/Software:

Motherboard: ASUS P8H67
Sound Card: Trust SC-5100 5.1 Surround Sound Card

Motherboard Sound Drivers: Realtek High Definition Audio Driver

Sound Card Driver: Trust 5.1 Soundcard 14319

Recap:
I uninstalled Realtek and installed the trust 5.1 sound card drivers.
I tried fiddling with WMP's settings etc. but no luck so far.

I hope someone can assist me in this struggle.
... Read more

A:Scrambled Noise At Higher Frequencies

I know its obvious but did you remember to disable the onboard (motherboard) sound chip in the bios?

Read other 9 answers
RELEVANCY SCORE 44.4

Hello,This is for the X1 Carbon 6th Gen.There are a number of threads this post refers to:https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Yoga-3rd-gen-CPU-frequency-pegged-at-max/m...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-6th-gen-Fan-Noise/m-p/4083801#M8590...https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/X1-Carbon-6th-Gen-fan-always-on/m-p/4083948#M... My understanding is that the CPU idle frequency settings are set in Windows registries while the fan settings are set in the BIOS. The issues discussed below are for the laptop on AC, not on battery. CPU issue-People reported that the CPU idles at around 4GHz no matter what tasks are performed on the laptop, leading to excessive heat. Lenovo provided a solution that lowers CPU idle frequencies to approximately 0.86GHz, 1.66GHz, 4GHz for Better Battery, Better Performance, Best Performance power modes (not power plan) respectively. They incorporated this solution in an executable patch found here: https://support.lenovo.com/sa/en/solutions/ht506625Reading the notes for the patch, I see under Operating Systems:Windows 10 1709 (version 16299)Windows 10 1803 (version 17134)And further down, under Additional Information:This issue is fixed in factory preloads based on Windows 10 1803 (version 17134) and later.  Only factory preloads based on Windows 10 1709 (version 16299) had this issue. If the symptoms are not noticed, then it is not necessary to apply the solut... Read more

Read other answers
RELEVANCY SCORE 44.4

I have this 13yr old monitor that's working perfectly fine, but I need to know it's vertical and horizontal frequencies.

Unfortunately I do not have any documentation for this monitor, nor is anything mentioned anywhere on it.

I've been using it on WinXP with a resolution of 1024.768 at (I think) 60.

Any help, pls.
 

A:Need to know the Horizintal/Vertical Frequencies of monitor

voip4africa said:


... a resolution of 1024.768 at (I think) 60. ...Click to expand...

If you were running a resolution of 1024 x 768 pixels and 60 Hz refresh rate, I believe that it is referred to as an XGA video format. The vertical frequency is 60 Hz and the horizontal frequency is about 48.36 KHz
 

Read other 1 answers
RELEVANCY SCORE 44.4

What are the maximum frequencies that are available in core i7 processors now?

I ask this because I'm looking for a new desktop PC these days. I currently have an ancient core two duo Pentium D processor runninf at 3.4 GHz, surprisingly all the PCs I have found so far are either very close to this frequency or slower.

A:What are the maximum frequencies that are available in core i7 process

Hello mohab mate is this for a build? if so just go to here https://en.wikipedia.org/wiki/List_o...icroprocessors and take your pick

Read other 1 answers
RELEVANCY SCORE 44.4

After installing Win2k pro I had to change my 41.09 Win98, Nvidia drivers to Win2k drivers and found that there is no option to change my video cards clock and memory freqencies.

With the Win98 41.09 Drivers there was an option in advanced settings to change the frequencies. I am really annoyed because I found that the Nvidia detonator overclocking was more accurate than Riva Tuner.
 

A:Nvidia Drivers :Clock frequencies

You need to install the coolbits reg file to add the registry key to enable the clock frequency adjustment

you can get it here http://www.guru3d.com/files/ in the overclocking and tweak directory
 

Read other 1 answers
RELEVANCY SCORE 44

Hi, ive had this laptop for a while now, and a few months ago the audio was working just fine when i was producing my music, i plugged in my microphone, guitar hitch, i even set up a new maschine micro mk2 and it all worked fine with low latency. I didnt change the latency and a few weeks after letting my computer sit, i came back and tried to go onto soundcloud, and the audio wasnt working right. The audio came out, but it was like the bass had been manualy turned off. I preveously owned a macbook so if you could please elaborate and explain how to fix the problem or what is happening, that would be greatly appreciated.

Read other answers
RELEVANCY SCORE 44

It has hardly been two weeks I've custom built my PC with newly manufactured parts and installed a cracked-activated version of Windows 7 Ultimate x64 on one partition and then ,Windows 8.1 x64 on another partition.
Ever since the first few days , I've been encountering BSOD frequently in every Instance of usage, although the occurrence of them depends on the system load. When the system is in an Idle State, BSOD occurs in 15-45 mins of being idle ; When in moderate use, such as downloading space intensive contents or watching movies it takes 75-90 mins before BSOD happens ; when in heavy use, such as graphics intense gaming or rendering processes, the system runs for about 3-5 Hours before the BSOD occurs. I use Windows 7 x64 as the primary OS and 8.1 is for guest users. I've tried Memtests, HDD tests, Processor Tests, BIOS tests and all turned out positive with flying colors and also tried disconnecting all parts and reconnecting them again, yet BSOD is a common occurrence. The details of the BSOD is as :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8009DFB028
BCP3: 00000000BF800000
BCP4: 0000000000200401
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\073015-17206-01.dmp
C:\Users\ARITRA\AppData\Local\Temp\WER-41059-0.sysdata.xml

I'm spendin... Read more

A:BSOD in irregular frequencies, error 0x00000124

the dump files would be much more helpful to the analysts.

Read other 8 answers
RELEVANCY SCORE 43.6

Can someone settle an arguement I'm having with my Nephew. He says that the default clock settings of my GeForce 3 card are too low. At the moment they are 175 Core Clock Frequency and 400 Memory Clock Frequency. We've looked at specifications for this card on the web and in the manual but both have not provided us with an answer. If someone could clear this up for us or provide me with a link that would tell me then I would really appreciate it.

Cheers.

Si

 

A:ASUS V8200 T2 Deluxe Default Clock Frequencies?

That's the correct clock rate for the card. Around page 4 of theis review you can see in the graphs the base clock and some overclocking benchmark results.


http://www.tweakers.com.au/articles/graphics/asusgf3ti200/page1.asp

here is a page that shows the standard clockrate.

http://www.hardavenue.com/reviews/Ti200roundup2.shtml

175/400 seems to be the standard clockrate on most GF3 TI200s. Do a Google search for "TI200 review" and you'll see. I think your nephew owes you lunch or something.
 

Read other 2 answers
RELEVANCY SCORE 43.6

 I just bought Lenovo IP510IKB earlier this week, and I really like it, but I think something is wrong with the speakers, when I play music or any kind of audio there is some kind of distortion or vibration at certain frequencies, I don't know how to describe it, it's like there is something vibrating inside the laptop. I tried installing lenovo Harman drivers but the problem is still there, I also tried Windows generic drivers and other softwares like FxSound, but nothing helped, something that I also tried is muting the left speaker and the right speaker, at first I thought muting the left speaker fixed the problem but after a while I noticed the same distortion but not as much. I tried living with this annoying problem as it's not always there, but it really appear when listening to piano, but I can't live with it anymore it's driving me crazy and I can't find any related topics about this problem in the IP510IKB. I live in Egypt and I bought this laptop from souq.com (something like amazon.com) about a week ago, and I don't think I will be able to return it, is it even something that the warranty covers?

Read other answers
RELEVANCY SCORE 43.6

How many MHz should i set the Core and Memory Clock Frequencies on my GeForce 5200 FX to without any chance of damage?

Current Settings:

Core- 250 MHz
Memory- 332 MHz
 

A:Core and Memory Clock Frequencies Geforce 5200 FX

Leave them.
 

Read other 2 answers
RELEVANCY SCORE 37.6

Specifications on my PC are in this link.
http://speccy.piriform.com/results/8...upmP8XfxejqfsV

I recently put my two HyperX 120GB SSDs in Raid0 but for some reason my boot time is about 2 minutes. I have good reason to believe that my newer SSD is conflicting with my 2TB Western Digital Cavier Black HDD. Earlier today I removed my newer (Only by a month) SSD and the computer booted up in 15 seconds. I reinstalled the SSD and it booted in about 2 minutes (and continues to do so) and this was prior to me putting them in raid0. Furthermore, when the SSD was out my 2TB drive was recognized in the bios where as now it does not. I do not understand why my 750GB HDD shows up though but I am not able to access it. I've check both Device manager and Disk management, but neither show my 2TB HDD. I've seen several threads similar to my problem but none quite the same. I'd appreciate any insight given on this matter. Thanks!

Things I have done:
1. Redo Raid0 and reinstall windows without HDDs installed.
2. Flash BIOS
3. Put HDDs in another Computer
I can't access the 750GB HDD nor can I format or change letter.

Also in the link, there are errors when you scroll down to the storage part that may be related but I am not sure.

Should I undo raid0 format both SSDs then put them in Raid0? Would that even make a difference? I am completely out of ideas on what to do because my 2TB drive is recognized in the BIOS if I install it without one SSD.

A:I believe one of my SSD and my 2TB HDD are conflicting.

What is on the 750 GB drive? Just data?

Did you purposely choose "dynamic" for that drive and if so why?

Do you insist on using RAID?

Read other 5 answers
RELEVANCY SCORE 37.6

after i sign into my msn & i see ive got mail, if i click on it, it opens internet expoler 32-bit, but it struggles to open or is very slow, how do i get the 64-bit IE to open automatically instead of 32-bit when i click on my 'go to mail' i.e. how do i disable the 32-bit IE.

A:32-bit conflicting

Have you enabled Tabbed Browsing (Internet Options/General/Tabs/Settings)? Then I expect it should open as a new tab in the same browser. I'm using 32-bit only since I don't have a 64-bit computer, but when I follow your procedure Hotmail opens quickly. Also, I expect you need to make sure both browsers (32-bit or 64-bit) open equally fast since there is no reason 32-bit should be slower. Perhaps you could try a reset: Tools/Internet Options/Advanced/Reset.

Read other 4 answers
RELEVANCY SCORE 37.6

Hi, hopefully you can help me.

I have just recently switched from using a broadband modem to a wireless router for my internet.

I connect to my Xbox 360 through my LAN but since I started using my WAN both will not work together. Once the LAN turns on my internet stops working which is my problem.
The Wireless network does stay connected while the LAN is on but its just the internet connection that stops working.

Does anyone know how to fix this problem?

I am using Windows XP
My Wireless router is a Netgear DG834GSP
The Wireless network is using DHCP and the LAN is using a static IP. I have tried changing the LAN to DHCP but it just gets stuck on "Aquiring Network Address"
 

A:WAN and LAN Conflicting

Read other 15 answers
RELEVANCY SCORE 37.6

Here's the setup:
Windows 2000 server running DHCP and DNS, got about 15 clients, using a linksys wireless broadband router with 4 port switch to connect to internet. Everything on same subnet, all addreses assigned by DHCP. Everybody on the network is fine except for two stations.
One station is a wireless XP Tablet the other is a hard wired PC. The NIC MAC addresses are different and the IP addresses are different, however, when one of these two devices is working the other one is not.
Any ideas? I'm usually a pretty good troubleshooter but this one has got me stumped.
 

A:two PCs conflicting somehow???

Read other 6 answers
RELEVANCY SCORE 37.6

Hey, recently I've been having some problems with my internet, mainly revolving around IPs. I've searched the forums for similar problems, and have tried some of the solutions, but to no avail.
Basically, when I'm doing anything on my computer, the internet cuts out randomly, and also randomly comes back on. Sometimes the error just fixes itself, and a little bubble appears at the bottom of the screen in the task bar, stating that "There was a conflict in IP addresses." Other times it cuts out either until I press the repair button in the network connections window, or hard reset the router.
I have a D-Link DSL-G604T router, which is connected to my main computer, and have a wireless external network of a netbook/laptop, a wireless homephone, two Ipod Touches and a Playstation 3. I'm not sure if the Ipods or the Playstation might be affecting the IP or not, but I'm just including it in-case it might be the problem.

Event Viewer:
In checking the Event Viewer in the Administrative Tools window, I can see a few things that might have caused the problem.

Security Tab: Failure Audit
IPSec Services: IPSec Services failed to get the complete list of network interfaces on the machine. This can be a potential security hazard to the machine since some of the network interfaces may not get the protection as desired by the applied IPSec filters. Please run IPSec monitor snap-in to further diagnose the problem.

System Tab: Dhcp
The IP address lease... Read more

A:IP conflicting with something......

Read other 6 answers
RELEVANCY SCORE 37.2

I've been using a certain anti-virus program and a certain anti-spyware program for the last year. I'm not sure if it's ok to say what their names are, they are not free programs.
Anyway, I renewed both of them, and the anti-spyware software was installed just fine. While installing the anti-virus software, a message pops up saying that the spyware program I have installed is a 'conflicting program' and it needs to be removed so the anti-virus program can be installed. Why is this? These two programs have worked fine with each other the last year that I've had them. I have contacted their customer support which I'm still waiting a response from.

Any help is appreciated. I am running WinXP. Thank you.
 

A:Conflicting Software

Read other 6 answers
RELEVANCY SCORE 37.2

Here is the MS Knowledge base article listing 50 programs that have a conflict with XP Service Pack 2. There is also some info for configuring the XP SP2 Firewall.http://support.microsoft.com/default.aspx?kbid=842242_____________________________________________________http://jetwater-co.com

Read other answers
RELEVANCY SCORE 37.2

Over the past week or so I've noticed a few issues coming up with my HP dv6000, and I believe that they might possibly be related. These are my issues:
1- Aero transparency will not work
2- I'm getting a "code 12" error when I look at my Nvidia display adaptor and also my standard openHCD USB host controller, which from my research means there is a resource conflict between the two issues, and that there is "not enough resources on the computer to run the hardware"
3- My hardware accelerator will not run

While I'm not sure this is the problem, I think that the display adaptor and the USB host controller are not wanting to work together, which is screwing up my aero and the hardware accelerator. If anyone has had these series of problems or may know what the issue is, I would love your help. Hours of research have so far helped very little. Thanks

A:Conflicting Hardware

Hello and welcome to Bleepingcomputer.I read your description above and noticed by the wording you used, that you are saying you originally did not have this issue, but then suddenly this issue did pop up. Does this sound correct?Did you recently use Windows 7's Performance information and tools which is found in the control panel menus?AeroPeak can be disabled within that feature, you may want to go there and see if you can turn it back on.You may have ran an older program such as an older video game which set your video back to a lower resolution with less colors available at 16 Bit and failed to allow Windows to go back to 32 or 64 Bit color.I would first try going to the control panel and click the link to Performance information and tools and check the status there, then post back and describe what you see.Pay attention to the link on the left that says visual effects. That is the one you want to click on.Bruce.

Read other 2 answers
RELEVANCY SCORE 37.2

Hi, new to the forum here and looking for advice regarding running multiple LANs.

I am running hydrographic survey equipment off both LAN's.

A high spec system runs on the motherboard's ethernet port (which needs to be run off there due to the high data frequency). This is the only hard wired ethernet port on the laptop.
The high spec system is set to the following:
10.0.1.102
255.0.0.0

A lower spec system would ideally run off an ethernet to USB or ethernet to expresscard adapter.
The low spec system is set to the following:
157.237.16.12
255.255.0.0

No matter which way round I configure it (i.e. which adapter used or in which order they are switched on) the data for the low spec system stops coming through as soon as the high spec system is connected...although both LANs are still visible in the network and sharing centre.

Any thoughts as to why?

PC spec below:

Windows 7 Professional SP1
64 bit
Dell Precision M4700
Intel Core i7-3520M CPU @ 2.90GHz
 

Read other answers
RELEVANCY SCORE 37.2

im trying to set up a dial up connection. Im getting a message saying that one of my ports is already in use and i cant seem to configure the ports right. how do i set this up ?
 

A:conflicting ports?

Your talking about com ports and when you install a modem it has to be assigned a com port. it would help if you tell us which modem your OS your running and what else is installed on the PC. Usually I find a com port conflict comes into play mostly with PC's that have serial ports and someoone then puts in a modem and the modem looks for com 1 but the serial port is in that place.
 

Read other 2 answers
RELEVANCY SCORE 37.2

Hello and thanks in advance for any suggestions...

I have two computers, Win 7 on one, Win XP on the other, brand new home built machines all updated and latest drivers. Each has a Linksys wireless adapter and each hook up well with a Mac Airport wireless network and connect to the internet well. Neither wireless card has an assigned IP address but get one assigned by the Airport. The computers see each other and can file share over the wireless network without problem.

I also have a Crossover ethernet cable between the two machines plugged into the jack on the motherboards for a 1 Gb LAN. For the LAN each computer has a static IP assigned with the other computer specified as the gateway IP. File sharing works over the LAN at seemingly very high speeds without problem. The static IP addresses are in a different range that what the Airport assigns.

The problem is this: when all the adapters are turned on, neither machine will find the internet. The LAN operates fine, the Airport connections seem to be intact, but the browsers cannot access the internet. Turning off the LAN corrects the problem, and even after turning the LAN back on internet access remains for a short time before going away.

Even though no internet is possible, file transfer works on both the wireless and the LAN; when copying a file over the computers seemingly choose the wireless network first but if one of the wireless adapters is disabled the file transfer can be restarted and will go over the remainin... Read more

A:LAN and Wireless conflicting

This is an easy one, just configure those direct connections with no Default Gateway or DNS Server addresses, and it'll stop causing you the issue.
 

Read other 1 answers
RELEVANCY SCORE 37.2

on one of my computers on my network i have got a conflicting ip address, and cannot access the network??? any ideas would be great thanks in advance
 

A:conflicting ip address

Read other 8 answers
RELEVANCY SCORE 37.2

Im using windows 7.
ive tried the cmd ipconfig /renew
it says media disconnected. How do I fix this? I am so tired of having an issue with my laptop and ps3 lagging cause of one another.
Thank you!
 

A:conflicting ip address

Configure a static IP on ps3.
 

Read other 2 answers
RELEVANCY SCORE 37.2

Please help I am so frustrated with this. I have a red flag warning telling me that Windows Defender is not working. When I go to the action center it says it is turned off, trying to turn it on or to up date or change Defender I get the message "This class is not configured to support elevated activation"
I have tried in both the accounts, we only have the two, admin and non admin. Nothing makes any difference. I have tried all the usual fixes, I have run the security scanner, Malwarebytes, spybot, appremover and ccleaner, nothing makes any difference. When I turn on the pc it is okay for maybe 5 minutes and then the red flag pops up. I am always told I must be running another virus software that is conflicting but I cannot find it. Can it be identified from the Hijack this log or program list? Would HP support assistant cause this problem?
Attached is Hijack this log and list of program files.
 

Read other answers
RELEVANCY SCORE 37.2

I've been trying to fix my router which has been dropping out over the last few days, and I've just had an error message pop up on one of my computers saying that there is a 'conflict of IP addresses on the newtwork' or something to that effect. I was just wondering if that could have anything to do with why my router keeps dropping out or not?

I'd really appreciate any help

Fisky
 

A:Conflicting IPs on Network

Read other 8 answers
RELEVANCY SCORE 37.2

Hi,
Um, Im having trouble getting my intellimouse optical to work in NT4. I'm using a USB>PS2 converter (which works fine in w98), however event viewer says mouclass doesnt detect the mouse and devices i8042prt and msi8042 are conflicting with keyboard ports 0 and 1. I have installed intellipoint 3.1 drivers. please help as i need three buttons for my graphic packages.
 

A:conflicting ports in NT4 (ps2)

NT4 does not support USB, that is where your problem lies. I had a similar problem trying to get an external CD writer to work on an NT machine.

Anto
 

Read other 2 answers
RELEVANCY SCORE 37.2

i have a small proplems i have a belkin router and when i try and plug in my other pc via rj45 lan it comes up with you have a ip address conflicting with a diffrent pc

i have the primary pc in port 1 and the other one in 2.

what can i do to stop it the pcs confliting on same ip?

thanks
 

A:Solved: Conflicting LAN PCs

Start by confirming in both pcs that you are using "auto assigned' in your tcp/ip properties and that you have no static ip address in the Advanced tab. Next go into the belkin router and confirm your dhcp scope is larger than one ip address.
 

Read other 3 answers
RELEVANCY SCORE 37.2

Hello,

I have two net adapters: onboard Intel 100 Pro and a PCI Realtek ethernet card running on a Linksys router. The PS3 is on the Realtek and the xp PC is on the onboard Intel. The Realtek connections shows a red X through it though I am still able to connect the PS3 to the internet. I am trying to stream video (Netflix Watch Now) to the television through the PS3 but Ps3 can't find any media servers (Windows Media Player, or Tversity). I'm wondering if this has to do with the red X being on the Realtek that the PS3 is connected on. I put the card in when I got the router as I needed to plug in all the ethernet cables. My setup is this:

(all wired)

internet access from Road Runner into the house to the modem, modem ot the router, then the vista laptop, kitchen desktop XP, and the Ps3 using the available ports.

Are the two cards conflicting? Is this why media sharing won't work? If so, how can I connect my home network to include the PS3 through only one of the two adapters?

(Can you tell I'm a total noob??)

Thank you!
 

A:conflicting net adapters

Read other 12 answers
RELEVANCY SCORE 37.2

I have recently installed ZoneAlarm Internet Security Suite for Vista.

I yet to find a compatible/non-conflicting maleware/spyware program!!!

Was using SpyWareDoctor!, But wont together with ZASS.

Any suggestions on real time scanner while using ZASS without conflicts?

A:Non Conflicting Tools...

Hello and welcome to TSF.

This is the HijackThis forum dealing specifically with malware. Please visit the General Security forum or Windows Vista Support Forum for such enquiries.

By the way, I've noticed that you've also started two other threads for the same computer with malware issues here and here. Please be informed that this is counterproductive as you might potentially be engaging two analysts for the same problem while there is a large number of other threads waiting for replies. Also, please read this sticky.

One of those threads will now be deleted. You can add the required logs to the remaining one.

Thank you.

Read other 1 answers
RELEVANCY SCORE 37.2

I have an ATI card that picks installing High Definition Audio controller, and its conflicting with my realtek drivers, this makes the graphics card go to 99% activity driving its temps way up. I was wondering if there is a way that I can prevent windows from automatically installing this drivers when I turn on the computer after I uninstall them with device manager.
Yes, I have tried the method in which you change device installation settings, but they keep installing.

A:Conflicting drivers

You can update the whole Catalyst -- it will update your drivers as well.

Now, if you are sure you don't want Windows to install drivers, just go offline until you install what you want; or run Windows in Safe Mode.

Read other 4 answers
RELEVANCY SCORE 37.2

hp mini 1000....no internet connection.....also getting..."windows was unable to find Certificateto log on the network.."santos".....my wireless router.
 

Read other answers
RELEVANCY SCORE 37.2

So I've bought a nice new computer, Win7 64bit OS... And with the motherboard instalation disks was some trial internet security suites, I chose trend micro internet security, I like(d) the software, plus my dad has a license with 1 more computer allowed on it - Serial didnt work, but thats not the issue. When Installing Trend Micro IS, it told me that MBAM was conflicting and to uninstall.. Which I did, and then promptly re-installed MBAM.. That was a few days ago now, and I was messing around, and I noticed Trend Micro IS was turned off.. So it turned it on, and it just hangs at "starting up" or whatever, in the sys tray. I think to my self, stuff this, I'll get avast av (got as far as downloading the setup, thats it), and use windows fw. Off to add/remove.... uninstall also hangs... Use Trend Micro's Diagnostic tool kit to uninstall - Success! Please restart... Restart... Hangs at the windows logo.. So I press the little restart button on the tower, and windows says windows couldnt load last time, and advised to run repair, so I run repair, suggests that I use sys restore, so I do, restart the computer, and obviously, Trend Micro IS is still there.. I repeated this several times before coming here

Any ideas/help would be nice

DM

A:Conflicting software?

You can try using OPSWAT's AppRemover - supported applications list.BTW, if any conflicts between Malwarebytes and another security program are reported, suggested solutions are usually provided in the Common Issues, Questions, and their Solutions, FAQs thread. See Section F - Trend Internet Security Pro.

Read other 3 answers
RELEVANCY SCORE 37.2

So after installing Win7 I had to get my printer. At first there was some compatbility issues but the troubleshoot fixed all that for me and my printer is working fine. However, my DVD-RW becomes non-functional (can't read/write).

So I did a test and uninstalled my printer to see if that was my problem and bingo, my DVD-RW is back and working again. Then I tried reinstalling my printer and after a restart my DVD-RW is gone again.

I went to troubleshoot and it suggested reinstalling the drivers which I tried but that didn't work. I went to check if I could update them but it said I had the latest drivers as well.

I'm hoping I don't need to buy a new printer since this one is still fine (although I had it for about 8 years now).

Recapping:

OS = Windows 7 Ultimate
Printer = HP PSC 1350 All-in-one
DVD-RW = Pioneer DVR-215 (I think, I can confirm later if need be)

Anyone help will be greatly appreciated!

A:HP PSC 1350 conflicting with DVD-RW

Did you get the drivers from the Manufacturers' sites? That is probably the best idea. With a printer so old, that might be the problem. Windows Update might be using drivers that it thinks are compatible, but have issues like the one you described.

Read other 5 answers
RELEVANCY SCORE 37.2

I have linksys wireless notebook adapter, router, and Motorola modem. My OS is WIN XP and the IRQs for the adapter is shared by the USB controller, RAGE PRO, and two other things - how do I change the IRQs - I freeze up when online and cannot turn it off unless I take the battery out
Help ME please

A:My IRQs are conflicting and I cant fix it!!!

Hello ThedumbTish

Have you gone into Device Manager and confirmed and IRQ conflict?

Right click on My Computer, chose the Hardware tab, and click Device Manager.
In there you should be able to see the modem, click the + beside the modem. Your Motorola modem should be listed. Then highlight it, right click and click properties. Go to the Resources tab and see if it lists any conflicts. Do the same for you wireless adapter card. It should be using IRQ 11.
IRQ 10 & 11 should be available to assign a device.
Normally modems are configured to use COM3's resources (IRQ 4 ) or COM4's resources (IRQ 3).

Changing system resources such as IRQ channels can result in your computer not functioning correctly, always make a note of the settings before you change anything so you can restore them back if required.

You could try manually setting them in your motherboard's BIOS.

Read other 1 answers
RELEVANCY SCORE 37.2

I have two 512 sticks of sdr. One is Spectek and the other is not(dont know). I just had my comp redone with new case, CPU(Athlon XP 2400), XP Home, AK73 PRO (A) mb.

After about 10 minutes of gaming it will shut off and say "You may have a problem with your memory". So I tried with just one stick and it only worked with the Spectek. My computer guy says it needs to be the same brand. because the new CPUs are bitchy about that.
Does this sound right? If so Where is a good place to buy Spectek 512mb srdram?
 

A:Two brands of ram conflicting

Read other 7 answers
RELEVANCY SCORE 37.2

Hello Again Folks:

This one has me really confused.
I have been running AVG purchased anti-virus application. The application tells me that my system is protected, however my Control Panel System and Security monitor informs me that my anti-virus, firewall, and anti-spyware functions are shut off. I uninstalled AVG and installed my Kaspersky AV program and when I check the security monitor in the Control Panel I get the same message. Since both AV programs are showing the same conflicting messages, I assume the problem is in Windows 7.
Any help would be much appreciated.
Regards
Powell Lucas

A:Conflicting messages

The problem is most likely the result of one or more antivirus product not uninstalling cleanly (e.g. leaving stuff behind).

This problem is so bad, that nearly every antivirus company has a tool just for cleaning up after their normal uninstall method. If your computer has ever had an antivirus product installed from another company, then you might want to run the cleanup tool from that company.
AVG | Download tools and utilities
Removal tool for Kaspersky Lab products (kavremover)

Just as a test, uninstall Kaspersky (then run their cleanup tool) and install MSE. Let us know if Microsoft's AV product is able to convince Microsoft's OS product that it is there.

Read other 6 answers