Over 1 million tech questions and answers.

Driver for LAN Ethernet 10/100BASE-T (conector RJ-45)

Q: Driver for LAN Ethernet 10/100BASE-T (conector RJ-45)

Hi, good afternoon, I have some problems to find the drivers for my laptop HP Pavilion Notebook - 15-ab223cl (Touch) (ENERGY STAR)... I used the links that I find in other chat but is was deleted in HP Support, someone can help me please.

Preferred Solution: Driver for LAN Ethernet 10/100BASE-T (conector RJ-45)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Driver for LAN Ethernet 10/100BASE-T (conector RJ-45)

Hi: You need this driver for the ethernet adapter... This package provides the Realtek Local Area Network (LAN) Driver that enables the Realtek Network Interface Card (NIC) Chip in supported notebook models that are running a supported operating system. File name: sp71191.exe

Read other 5 answers

Looking for integrated 10/100base-t ethernet lan windows 7 driver 64 bit driver, system 15-AC135DS

View Solution.

A:integrated 10/100base-t ethernet lan windows 7 driver 64 bit

@GurpreetA? http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_104622_1&swEnvOid=4063#tab3 REO

Read other 8 answers

I have a home stereo reciever that will take a wireless usb signal and allow me to play mp3 music off my computer and into my home stereo.The problem I have is that the signal is only good for 30M and my rooms are too far apart.Is it possible to use the network wiring that I already have installed in the house(they are not currently being used)...buy the USB adaptors and wire directly into my home reciever???
Any help would be greatly appreciated.

A:USB to RJ45 Ethernet, 10/100Base-TX

Thats a good question, Infact, to what im reading you want this

Computer>USB to Ethernet > Ethernet cable > Ethernet to USB Reciever?

I dont see why that wouldnt work, but then again, I dont know that much about transmitting wireless signals and such.

Read other 4 answers

My HP Pavilion 17-e119wm Notebook PC with built in Realtek PCle FE Family Controller 10/100BASE-T Ethernet LAN and upgraded to Windows 10 and says it has most up to date driver version 8.20.815.2013,  is only getting 10mbps download speed plugged in on ethernet.   I am paying for 60mbps through my ISP.  My WiFi gets close to 60mbps.  Shouldnt this laptop plugged in to hard wired ethernet cable get close to 60mbps?  When I click on ethernet status in Windows Network Connections, under speed it shows a bottleneck of 10mbps.  How can I increase that number to 100mbps or increase my ethernet speed to 60mbps?

A:10/100BASE-T Ethernet LAN speed

patscarr wrote:My HP Pavilion 17-e119wm Notebook PC with built in Realtek PCle FE Family Controller 10/100BASE-T Ethernet LAN and upgraded to Windows 10 and says it has most up to date driver version 8.20.815.2013,  is only getting 10mbps download speed plugged in on ethernet.   I am paying for 60mbps through my ISP.  My WiFi gets close to 60mbps.  Shouldnt this laptop plugged in to hard wired ethernet cable get close to 60mbps?  When I click on ethernet status in Windows Network Connections, under speed it shows a bottleneck of 10mbps.  How can I increase that number to 100mbps or increase my ethernet speed to 60mbps?Hi, Why You Probably Aren?t Getting the Internet Speeds You?re Paying For (and How to Tell)Have you ever noticed that your Internet service provider advertises their speeds as ?up to? a maximum speed? You may think you?re paying for a 15 Mbps connection, but you?re actually getting an ?up to 15 Mbps? connection that may be slower.We?ll look at why actual speeds differ from advertised speeds and how you can identify whether you?re actually getting the Internet connection speeds you?re paying for. Actual vs. Advertised Speeds: Hard DataData showing that most people are getting slower broadband speeds than they?re advertised is easy to find. To get this data, all someone has to do is run a speed test on their connection and compare the actual results to the advertised speeds. In most cases, the sp... Read more

Read other 1 answers

hello allI downgraded my laptop pavilion from windows 8 to win 7 ultimate, but I can't connect to the internet because I need the network adapter driver (Integrated 10/100BASE-T Ethernet LAN(RJ-45 connector). It's nowhere to be found on the Hp web site. Does anyone have it. Thanks much...

A:Integrated 10/100BASE-T Ethernet LAN (RJ-45 connector)

Hallo, Can you post back with the full Model No. and Product No. of your notebook - you can usually get this by holding down the fn key and pressing esc,  Thanks

ZincasI am an HP notebook/printer technician.Please click ?Accept as Solution ? on the post that solves your issue to help others find the solution.Click the Thumbs Up on the left to say ?Thanks? for helping!

Read other 1 answers

I have this reoccurring warning sign that appears every time I start my computer. I need to see how I can get this issue resolved and what I need to do so it doesn't happen again. I hope that someone will have some relevant information that will help me get this resolved ASAP.

A:HP Connections exe. Lacks ID conector '-'

I am having the same problem message I hope someone has an answer.

Read other 2 answers

Hi there TSG, I'd like you to give me a little hand on here.

See, I use both speakers and headphones to listen to music in mi pc. Sometimes I use the former, sometimes the later. I don't have a front audio panel, so changing the plugs it's annoying, gotta move too many things. At first I used an audio splitter, but it's quality its utterly horrid, and I've tried like 3 kinds.

My board, an ECS with Realtek ALC662 has the typical 3 conectors, Audio Input, Audio Output n Mic Input. The software driver allows to arrange the streams to have output trough the inputs for a mirrored 2 speakers, 4 speakers and 5.1 speakers sound system. So, instead of the splitter, I use the software to mirror the output through the audio input. So far so good, but the problem is everytime I reboot the PC, the config gets lost, and I have to unplug and plug the input plug for the software to ask me what I wanna do with that stream [make an output, plz] So, it's the same as just switching and the idea is to avoid it.

Sooooo, I wonder, does anybody knows for a program that could mirror the output through the input? Or maybe, does know how the software driver works for making the changes without having to unplug and plug for the software to ask? maybe it changes something in the registry or maybe sets an option in a file...
Any kind of help is always welcomed :] Thks in advance.
PS: And as a bonus, does somebody knows about a program that could morph the mic input ... Read more

A:Help: Audio Output through Input conector

No? someone? anyone?

Read other 1 answers

.I reprogrammed my laptop Samsung with the model code NP-N102S-B02NG. so when I'm connecting my laptop to the wi-fi i cannot connect because it has no driver for Ethernet and Network Controller driver. so I waana ask how can I have those driver?
I need your help so that I can already use my laptop. thankyou

Read other answers

I downloaded the drivers given in the device support page dedicated for my laptop. But those drivers are not getting installed properly. I am getting an error while installing them. Thus the Ethernet controller and thge Graphcs adapter are not working. I have operated UBUNTU on my device since FEB this year and just formatted and installed windows 7 64 bit. Please provide with a solution.

Read other answers

I have a FLEX 215 running the new Creators Update.  After I installed this update, Windows update  keeps offering me the ethernet driver even though I already have this latest ethernet driver already installed.   I tried downloading the latest ethernet driver from Lenovo website and went through setup steps and repair option.  When I checked again it did not says "Windows is up to date and the time".  It kept trying to install the ethernet driver.
Is this happening to anybody else?  Please help  
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.

A:Flex 2 15 - windows update keeps offering me ethernet driver update even with current driver

Hello CaryguyThanks for using the Lenovo forums.Try to uninstall the driver, and the let the computer try to find it.

Click Start, type Device Manager, and press Enter.
Find and double-click the category of driver you want to uninstall
Right-click the device, and click Uninstall.
Windows will prompt you to confirm the device?s removal. Click OK to remove the driver.
After the uninstallation is complete, reboot your computer as soon as possible.

See if this can help.
Hope this helps, let us know how you get on.==================================================================================Did someone help you today? Thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Read other 1 answers

I have a FLEX 215 running the new Creators Update.  After I installed this update, Windows update  keeps offering me the ethernet driver even though I already have this latest ethernet driver already installed.   I tried downloading the latest ethernet driver from Lenovo website and went through setup steps and repair option.  When I checked again it did not says "Windows is up to date and the time".  It kept trying to install the ethernet driver. Is this happening to anybody else?  Please help  

Read other answers

i have installed windows 7 but it will not discover my ethernet cards both on board and add-on card? i can put the add-on card in anothermachine and it will install the driver for it but not on my machine, the mother board is an msi 945p neo3 64bit. the oter machine is a gatway 64 bit!

A:no ethernet driver

Hello,The  MSI 945p Neo3 64bit is using Realtek 10/100 LAN card. Go to another computer which can access Internet, download the driver from the followling link and then copy to your computer:http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1041MSI only releases the driver for Windows Vista, so it may not compatible with windows 7. You can try to install this driver with windows vista compatible mode:1. Right-click the exe. file to launch the driver installation program and choose Properties.2. Under the Compatibility tab, please check the "Run this program in compatibility mode for:" and choose Windows Visa.3. Click OK to save the settings.4. Right click exe file and choose run as administrator.Thomas77

Read other 9 answers

I had to wipe down my hard drive and upon reinstalling my OS, I lost my ethernet driver. My processor is as follows:
Processor Brand: Intel?
Processor Class: Pentium? 4
Processor Number: 631
Processor Speed: 3.00GHz
Processor Interface: Socket LGA775

When I open up the computer the numbers written on it are P35-PB7-RFT9 and it says the word Tech on it with a half circle symbol. I can't seem to find a driver for this by plugging all this info into Google. Please help.



A:Need ethernet driver

Did you system come with a install cd? If not we need to know the
model name and number of board. Usually written between pci slots.
Or run a program like everest, that will give you the complete
description of your board and components. You will need to install
mobo drivers as well. If the machine was bought from a box store
or ordered from a online source, you may find the drivers you need

Read other 3 answers

i have just upgraded to 7 from Vista everythg is fine apart from the fact that the ethernet controller driver isnt recognised so i cant get on the internet. Im a bit of a noob when it comes to these things & i cant seem to find any drivers that work. My motherboard is "WINFAST 760gxk8mc" & the ethernet port is on the motherboard, im on windows x64. if anybody can help in anyway that would be great.

A:Ethernet Driver help!

Hello Saints and welcome to Seven Forums!

What is the make and model of your computer? HP, Dell, eMachine?


Read other 8 answers

I am using HP Compaq dc7800 Small Form Factor, even my internet is working, do i need to download and install Ethernet driver software?

A:Ethernet driver

Hi: It is not necessary to do so, if your ethernet connection is working fine. You can right click on that update, and select hide update and you won't be bothered with it anymore. If the other device drivers you need that are hidden by your other info in the screenshot are named PCI Serial Port and PCI Simple Communications Controller, then you need these drivers for those 2 devices... This package contains the Intel Active Client Manager Host Embedded Controller Interface (HECI) device driver for the supported desktop models and operating systems. ftp://ftp.hp.com/pub/softpaq/sp46001-46500/sp46137.exe This package contains the Intel Local Management Service (LMS) and Serial-over-LAN (SOL) support for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative. ftp://ftp.hp.com/pub/softpaq/sp46001-46500/sp46134.exe

Read other 2 answers

Hi, ive got quite an old computer so it doesnt have an ethernet port. So i wanted wireless internet in 2 rooms. The other computer in the other room is working fine on the wireless internet but because i dont have an ethernet port on this computer i cant set up the wireless internet on it.

So i have recently bought a USB TO ENTERNET apdater. Now when i purchased the product from pctradeshop.com it said it came with a driver CD. Now what it didnt say was that the driver CD was a mini disk. so i now cannot use this adapter unless i get the driver, the adapter is an PLUSCOM ADM8515 USB TO LAN NIC adapter.

Any information on where i can find this driver or any help on how i can get this adapter working so i can use the internet would be very grateful.


A:Usb To Ethernet Driver

try going to the Mfg. site and see if you can download the driver directly from them.

Read other 3 answers

I have recently installed a new operating system on my computer it is an Acer aspire E380. I couldn't find the disk with all the drivers for my computer so had to find them online on another computer. I found them and everything works except the ethernet adapter. Does anyone where to find the drivers for this. I have already been to the Acer website that is where I got the rest.

A:ethernet driver

Read other 8 answers

I can't find a driver for Windows 7 Ultimate (32-bit) - anyone recommend a version that works?

A:Ethernet Driver

Hi: Did you try the Vista Business drivers from your notebook's support page? Try manually installing the driver if the auto install method doesn't work. You would manually install the driver as follows... Go to the device manager and click on the ethernet controller needing the driver. Click on the driver tab, click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp37093. Make sure the Include Subfolders box is checked and the driver should install.

Read other 1 answers

This is what it is.
I can not find the installation CD/Disk
I don't have a net connection on my comp because its not recognizing My Ethernet card.
Also, I just did a format of my hard drive. So everything is new again

Microsoft Broadband Networking 10/100 Ethernet PCI Adapter

I'm having trouble finding Drivers

A:Looking for Old ethernet Driver


i believe thatis the one .. you willhave to register to dpwnload the driver

Read other 1 answers

hi im looking for a driver for a dell ethernet card (onboard) for an xp system.

this information was found on the stickers inside and on the outside

model no DMC
sl7agm intel'83

this onformation is etched on to the ethernet port housing

mallack ( i think it says mallack or mallax)

A:ethernet driver

Read other 6 answers


I've got a desktop (pretty old)
I just got a new wireless internet router but i usually use the USB with my old one. However, this one doesn't have a USB port , only Ethernet. I plugged it in but nothing happens. I think I need the drivers for the ethernet port, if that exists?
I'm running Windows XP.


A:Need Ethernet Driver!!


A wireless router has 4 or more wired ports on the back of it so you can use a combination of wired and wireless connections, if you want to.

Since your old desktop has an ethernet adaptor and uses a wired connection, it needs to have the driver for it installed for it to work properly and get a connection.


Right-click MY COMPUTER, then click Properties - Hardware - Device Manager. When the Device Manager window opens, click the + in Network Adaptors. What is the description listed for the wired ethernet adaptor? Is the an X or exclamation mark or question mark next to the entry?


What is the brand name, model name, and model number of that desktop?

What version of Windows is running in it?


Read other 2 answers

Preparing to custom install Win 7 but "adviser" recommends downloading a IC Plus Ethernet Adapter 10/100 for Window 7, and it seems one is not available, closer examination of the mini disc reveals a CNET driver (for XP) (and works) but again, no Win 7 driver available at CNET or on mini disc.

And I keep getting directed to some driver all inclusive salesmart, I am upgrading O/S to avoid them in the first place.

Ideas and advice would be most appreciated.


A:IC Plus Ethernet 10/100 Win 7 driver

Hi, i woulnt think if the adviser says that, that it's a show stopper situation. Are your devices all ok? If so, no point in wondering, upgrade and see.

Read other 2 answers

I recently installed windows 7 on my Dell Dimension E310. I found that the ethernet driver is now missing. Where can I download a new driver

A:ethernet driver

Read other 6 answers

I just installed windows xp on my custom built pc, and the motherboard disk I have doesnt have the ethernet driver. Anyone know where I can get it? Thanks.

Also, the name of my network card is 1394 net adapter.

A:Help getting ethernet driver

Read other 6 answers

I recently got a new computer and my computer which i had thought to be registered fine and dandy shut me out of windows 7 telling me that the windows 7 i had was not genuine even thought i had just got it straight from the factory so i tried reinstalling it with the disc it came with it worked well and windows 7 now works correctly but for some reason i cannot connect to the internet because i am missing the driver for it and having this problem i cannot connect to the internet to look for the drivers i not exactly computer savvy so if anyone could take me through it step by step i would greatly appreciate it thanks

A:Ethernet driver gone?

Did your computer come with a setup DVD? That setup DVD may contain crucial drivers for your computer including the ones for sound and network. So use that and check it out if your computer came with a setup DVD. You may need to ask at the store you bought that machine while its new.

If not, here's a solution. Type Device Manager on the Search bar st the Start Menu. On the Device Manager, under "Network Adapters", choose your network adapter, right click it and choose Update Driver Software. Then Browse My computer for Driver Software then Let me pick for driver software installed on my computer. It shows a list of compatible driver software. Click one until its highlighted and choose Next. It should try installing driver software then you may need to restart for that to take effect.

If this won't do either, copy the exact name of your motherboard. Use another computer with Internet, type that name on Google and add "ETHERNET drivers for" lets say for example "ETHERNET drivers for <exact name of your motherboard model>" then Search that on Google. You can see links where you can download drivers for that, look for the ETHERNET driver compatible for Windows 7, download that, put that on a USB drive then install that to your computer.

Read other 4 answers

Hi i'm looking for a ethernet driver for a CICERO model number is NIS-010S.can anyone give me any ideas of where to look or what i can do thank you.

A:ethernet driver help

Hi wu methods - welcome to TSG.

Try www.driverguide.com. I always have great luck there. You have to register first, but it is worth it.


Read other 3 answers

Hi  I am using HP 15-ac-179-tx. I have installed Win 7 in this machine. Now for drivers if i got to HP drivers support page in network section i can only find driver for Wireless LAN and Bluetooth. There is no driver for onboard Ethernet card.Where can i find the driver for 15-ac-179-tx onboard Ethernet Card?  Thanks  

Read other answers

I am trying to get a computer on my home network. It does not have a ethernet driver, and I can't figure out what kind of ethernet card it has. How do I find this out? I would like to download a driver for it.
Thank you,

A:Ethernet driver

Read other 7 answers

I did a reinstall of my xp operating system. Now I cannot connect to the internet. I use ethernet cable but there is nothing showing in the network connections page. My ISP told me that I don't have a driver install anymore. I bought this computer as refurbished. Dell Optiplex GX280 . Please help.

A:no Ethernet driver

welcome to TSG.

You are going to have to go to the Dell site, enter your service tag, and download the updated driver. Chances are that got dumped when you reformatted.

Read other 2 answers

Hi Everyone,

I have an older computer. A Dell Optiplex G1, Pentium2, 400mhz and running windows 98. I realize I will have to upgrade soon...particurally the w98. But, people say XP wouldn't work real good on this system.

I was thinking about DSL. My question is I have an ethernet card, but a friend gave me this computer and it's been formatted since. And, I don't have the driver. I went to drivers.com and it said "Free" scan. I don't know if it's legit. I don't know what card I have. But, can anyone give me advice?

Thank you,

A:Ethernet Driver

Hi , i would try http://www.d ownload.com/Belarc-Advisor/3000-2094_4-10574794.html ( belarc ) to find your card and then http://members.driverguide.com/ to get the download . Pretty simple process with the drop-down menus , but you do have to register for free.

Read other 3 answers


A:Pci Ethernet Driver

Check here.

If it asks for a login and password, the login is 'drivers', and the password is 'all'. Good luck!

Read other 1 answers

this is the spec of the pc please help me.......

OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
OS Manufacturer Microsoft Corporation
System Manufacturer INTELR
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 15 Model 2 Stepping 4 GenuineIntel ~2020 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 3/4/2003
SMBIOS Version 2.2
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Time Zone China Standard Time
Total Physical Memory 768.00 MB
Available Physical Memory 609.89 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 1.83 GB

A:How do I know what ethernet driver I need?

The ENet driver you have will depend on the mobo manufacturers choice of hardware. Since it's an Intel processor, you probably have Intel ENet hardware.

If you open the case, somewhere on the mobo, usually in white letters, you'll see the model number and the brand of mobo. Enter those in google and follow the appropriate link to the manufacturers web site. Then follow the links to 'Drivers'. There you'll find and download the driver for your mobo. Load that onto a thumbdrive and then install it on your computer.

Read other 2 answers

Can you please help me.
I had my computer with windows xp home edition system cleaned.
Since then it does not detect my ethernet connection.

I have checked my system file and in device manager it has a yellow question mark against it.

Have been to windows update but this has not corrected the error.

Can you help.

A:ethernet driver

Read other 9 answers

i am having similar problems, my computer doesn't recognize my port. it is a g-tech 025 143 PCH90652A, and i cant find a driver. if any one has the driver that will work for this port that the can send me or can post a link where to download, or the g-tech website, i am having trouble finding. thanks heaps.
[email protected]


A:Driver for Ethernet NIC

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Note: You will need to post complete details of your configuration and your specific issue in this new thread for us to help you.

Thanks for your cooperation.

Read other 1 answers

I just reformatted and reinstalled Win XP Pro on my PC at work. In the Device Manager there are some items that are not working or do not have a dirver. I do not have the driver CD for the PC. Is there a way to get a generic driver for the Ethernet card so I can get that working at least. I cannot get online at the moment to downlaod any drivers.

It is a Compaq PC Model: Evo. I cannot find a model number though.

A:ethernet driver

Go to the HP Support site and put in your serial nuimber ( it's on a sticker on the back or side of the tower ) . . navigate to drivers and start with chipset, then all others. You can burn to cd to use on the other machine.

Read other 2 answers

Hi all,
i hav an asus m4n68t m le v2 motherboard which has nvidia nforce network card. i am installing the ethernet driver but its askin me if i want 2 install storage driver aswell. i havent herd of this b4. do i install it?and wot does it do? any hlp will b great. thanks in advance

A:ethernet driver

If you have a nforce chipset, which it looks like you do, the storage driver should also be updated.
Just make sure to go to nvidia and get the most recent nForce 630a drivers you can.
I don't know if they have proper win 7 support for the 630a or not pretty sure they do though. I was able to find proper win 7 drivers for my old 680i model.

Read other 5 answers

Hello Guys!!

Intel board has no floppy connector; I donít have a USB floppy drive. I have a Adaptec controller with 2x 80GB drives connected to it in RAID 1. When installing Windows 2003 server I press F6 for additional drives; but it want my dam floppy and I have no floppy. Any way I can trick the USB memory stick into thinking it is a USB floppy? How do I do that?

Thanks Very Much!!

A:No FDD, No Floppy conector on board, F6 wants the dam floppy!!!

Read other 7 answers

i just reloaded windows and couple of drivers are not recognised . most important the ethernet card Pulse jack jyo 0002 otherwise i cant log on to internet

please help

A:Need a network/ethernet driver

Read other 6 answers


I have a Gateway MT3708, which had Vista on it. Got a virus (constant popups blocking screen) so I couldn't do anything. Tried to reinstall from my recovery disks, nothing happened (or I wasn't doing it right). Installed XP sp3 (not legal) now many drivers missing including ethernet and wireless, hence not able to get on the internet with that machine. Looked on Gateway site and no drivers available for use with XP. Can anyone help please? I have read many threads but no same issues. I spent many hours looking up drivers and trying to install what I thought was right but no luck.
Can I find drivers or should I install another Vista (would be illegal as my disk don't work)?
Thanks in advance.

A:No Ethernet driver on XP Installation

You need to contact Gateway Support and get a replacement set of recovery discs. They will should send you a set. As an FYI, Gateway will not have XP drivers unless the hardware in the system is certified to work with Vista and XP.

Read other 7 answers

I had to reinstall Windows XP, & I can't get on the Internet. I have a yellow question mark beside Ethernet Controller.
This is what I get PCI\VEN_14E4&DEV_16A6&SUBSYS_80A91043&REV_02\4&3890381F
Can anyone point me to where I can find the driver please? I can then get on line & update the rest.

A:Solved: Ethernet Driver

Read other 16 answers

Hi i am new to this, so bare with me, i have a dell desktop computer, it got infected with trojan virus, so had to reinstall software, however i cannot get conected to the internet, i have called my ip and apparently i need to update ther ethernet driver, as i can get no access to the internet, i am using my sons laptop, i went on the dell website and saved the driver download info to memory stick, which i then added to my dell, it went through the scan and told me "The remote name could not be resolved, db.drivernavigator.com.. very confused.. hope someone can help thank u...

A:ethernet driver needs updating

Before you do a hard drive format and clean install of the operating system, you should identify the computer's devices and have the drivers for them saved on a CD-R or USB thumb drive or both. You can then use that media to install any device drivers that didn't get installed during the install of the operating system.

What's the 7-character service tag number on the sticker?

Which version of Windows is installed?

Go into the Device Manager, then advise what's listed in Other Devices.


Read other 1 answers

My pc runs on XP with an ASUS a8v motherboard.
Device manager says that Ethernet controller has a problem (no driver installed) How or where do I get this driver . I looked at the asus website but wasn't sure what to download.

I have just bought a tp-link td-8968 modem /router which I am trying to install . I get no Lan light. is the above the problem ?

A:Solved: Ethernet driver

If your motherboard is a straight up A8V and not one of the other variations, then you will need to go to the LAN portion of the downloads and choose the Marvell Yukon Gigabit Ethernet Driver V7.14.1.3 driver. Click on the Global icon to download it.

Read other 2 answers

I can't install the driver for ethernet. I don't know if the installer is just not working. please help me. motherboard is P5PE-VM ... or please give me the best driver and how to install it properly. thank you so much for those who can help.

OS- winXP

A:Installing Ethernet driver


Go there, select Windows XP in the dropdown menu. Then choose LAN. Then choose either:
Marvell Yukon Gigabit Driver V8.56.6.3 for Windows 2000/XP/2003(WHQL). (beta)
Marvell Yukon Gigabit Driver V8.25.1.3 for Windows 2000/XP/2003(WHQL).

If you get the beta driver it appears you'll need something to un-rar it. If you get the 8.25 one it is simply zipped and XP should be able to unzip it on its own. Then run marvell_yukon_drv82523.exe

Read other 1 answers

I recently reformatted my computer and made it into a dual-boot system with XP Home and Ubuntu 7.10. After I installed Ubuntu I went on the internet, so I know it works on the computer. However, when I go onto Windows I cannot get on the internet. I have estabilished that my ethernet card does not have a driver installed. The card is: BCM5701 Gigabit Ethernet. I went on the BCM website and downloaded the driver, stuck it on my flash driver, and transfered it to the internetless XP account. I ran the driver update wizard for the BCM card several times. I have both let it do a complete search for suitable drivers and I also gave it the file path to find the driver. It acted like it installed the driver then gave me the Code 10 error message: The Device is not configured properly.

So now I need some help. I've exhausted the options I can think of to rectify this problem. I'm sure there is some obscure setting somewhere that I need to change. If someone can help me out here that would be wonderful.

A:ethernet driver will not install

I'm sure someone will give you the anser . Is the eathernet port disabled in the bios maybe ?

Read other 2 answers

Need a Ethernet Controller driver download
I have a 2go? Classmate PC E12 Value Netbook Built on the Intel? Atom? N2600 processor, I really don't know what else I need nor where else to look or try. I have tried some to no avail Help me out here guys

A:Need Ethernet Controller Driver

Upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
It will help us to know what is your Integrated 10/100 LAN device.

Read other 9 answers

I had to reinstall xp, and I now have to reinstall alot of drivers. I need to get the Ethernet one 1st, but i have no idea what my ehternet card model # and everything is. I opened the pc up, but i can't determine anything. It's an asrock motherboard i think, I didnt know it needed a separate ethernet driver. That's what the support said at my isp when i called them for assistance on getting my pc connected.

A:Finding ethernet driver

Read other 6 answers