Over 1 million tech questions and answers.

Connect WIN server 2012 to domain

Q: Connect WIN server 2012 to domain

I have installed WIN Server 2012 on my laptop using a new volume and dualBoot.
I would like to set it up on our domain but I'm not very technical. I have run NSLookup but I don't really know what I'm looking for. I haven't yet setup the DNS on the server.

Thank you in advance for any assistance you make be able to offer.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Connect WIN server 2012 to domain

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 88.8

Hi
I have a strange problem I cant workout. It started with a new customer RDP 2012 server which we could not connect to an app once logged in.
If on an external PC it works OK.
If I create a fresh PC on our LAN it works.
If I this PC to the domain, it works.
If I move the PC to a UK Specific OU it stops working
If I move back out of the OU it still does not work
If I remove from the domain and do "GPUPDATE /FORCE /BOOT" and reboot and log backon as local admin account it still does not work!!
So there seems to be something in particular on the GPO in the UK OU in AD which causes the problem but even after moving the computer out it seems to store this mysterious setting and fails to work unless reimaged.
Any suggestions besides adding each option one by one in test GPO/OU????

Read other answers
RELEVANCY SCORE 77.6

   Dear Team
       I have windows 2012 R2 domain server. It is connected domain perfectly windows 7 pro .
      But if i connected domain windows 7 ultimate . It is showing DNS error. I am joining same process win7 pro.
      please help me how to join windows 7 ultimate in domain.

   Note. I give my client PC windows 7 ultimate network proper DNS.

Read other answers
RELEVANCY SCORE 75.6

Windows
2012 

IP settings           172.17.2.36

Subnet mask       255.255.0.0

Gatevay                 172.17.2.1

DNS                       8.8.8.8

                           
     

Windows 7

Obtain
IP address automatically  

----------------------------------

----------------------------------

DNS
                       8.8.8.8

 
                                

The
error code reads 

------------------------------------------------------------------------------------------------------------------------------------------------

The
following error occored wen DNS was queried for the servise location (SRV)

resource
record used to locate an Active Directory Domane Controller (AD DC) for Domain

"dalek.local
".

 

the
error was: "This operation returned because the timeout period expired."

(error
code 0x000005b4 ERROR_TIMEOUT)

 

The
query was for SRV record_ldap._tcp.dc._msdcs.dalek.local.

the
DNS server used  by this com... Read more

Read other answers
RELEVANCY SCORE 72

I have a Windows Server 2012 R2 domain in the dmz. I have a Windows Server 2012 R2 domain in the network. I can access the one in the network to the dmz without a problem, but I cannot access the one in the dmz to the network. The ip addresses in the network are different than the ip address in the dmz. I fowarded the ports but the dmz box still gets blocked. I tried to do it by VPN after setting the router to accept VPN. The connection still gets blocked. I set all the firewall settings.

I'm not sure where to go from here, any help would be appreciated.

Thank you
 

A:Windows Server 2012 R2 connecting 1 domain to another through 2 routers

Read other 6 answers
RELEVANCY SCORE 70.4

                    
This was originally posted in the Server 2012 forum, but perhaps it's more applicable to Windows 7.

            




I've joined the Windows 7 Pro workstations to the Domain using the SERVER2012/Connect app and that seemed to work fine.  I made the Users all Standard, not Admin, and access to the Shared folders is working fine too.  Users appear to be in the
Administrators group on the local machine, which is what I need.
However, a number of our applications aren't working correctly ... one writes changes to HKey Current User and those changes will not stick.  Some IE sites that require changes have to be made each time; those changes don't save.  Some
of the ODBC connections to SQL databases are behaving strangly as well.  I tried checking permissions on the Windows Registry keys, and they looked OK.  Turning off User Access Control did not help either.
If I log on to the workstation not using the Domain Account I don't have this problem.  And, one of the workstations which had performed the Windows 10 Upgrade while connected to the previous Domain Controllder works fine.
Any direction would be greatly appreciated!   Thx DMiller

Read other answers
RELEVANCY SCORE 69.6

Windows Server 2012 R2

Domain Join User Not Able To Access Internet Need Solution.

Scenario.

Server Attach 2 Networks Card.
Private Network
IP: 10.0.0.10
Subnet: 255.0.0.0
Dns: 10.0.0.10

Public Network
IP: 192.168.15.14
Subnet: 255.255.255.0
Default Getway: 192.168.15.1
Internet Working On Domain Controller

Client User:
IP: 10.0.0.11
Subnet: 255.0.0.0
Dns: 10.0.0.10
Now I Want To Access Internet on Client User without Proxy Server
Kindly Guide Me Complete Procedure.
Guide You In Depth.
Server Attach Two 2 Network Card
1st Network Card Attach Internet Wire
Ip 192.168.15.14 Subnet:255.255.255.0 Default Getway: 192.168.15.1
2nd Network Card Configure Private Ip
Ip: 10.0.0.10 Subnet: 255.0.0.0 Dns:10.0.0.10

Now Private Network Card Wire Attach In Cisco Switch 2950
And One Wire From Cisco Switch 2590 Connect To Local User System
Client Ip 10.0.0.11 Subnet: 255.0.0.0 Dns: 10.0.0.10
Client System Join Domain Successfully
Now My Question Is I Want To Access Internet On Client PC Without Proxy Server.
Waiting For Good Reply...

Read other answers
RELEVANCY SCORE 66.4

One of the office computers I have running windows 10 Pro stopped connecting to 1 of our 2012Server using remote desktop connection (RDP). It will connect or other 2012 servers at different locations using different IP Addresses I have disabled the Firewall, Turned off Antivirus, and yes, I have rebooted the PC. Also the User account and password do work if I login to the Remote Server from another PC in the Same office, So it is a Problem with the Win10 PC. I Changed the Network group from Public to Private, still no go. It acts like it just wont connect just that one remote IP server address, all the other remote server I try to connect to work just fine. Is there a file that needed to be Updated, or cache that needs flushed? This happened after the w10 update, but again I dont want to remove all updates, as this connection problem is only giving me trouble on 1 server connection.

Read other answers
RELEVANCY SCORE 64.4

The Client Connect to Windows server 2012 Essentials not working for 1 PC on a network. It didn't work a year ago when I set up the domain and the other 8 PC's connected, but the HDD died so I did a fresh install in Window 7 Pro SP1 and put in all the updates
and tried to connect agian.
The error is that it can't find the server.
I've tried everything else I've seen on the forums, IP v4 only, DNS is only set to the Windows Domain server.

below is the log for the connect attempt, does anyone have any ideas?

10/24/2016 15:11:38  edc] wmain: Start of Computerconnector
[10/24/2016 15:11:38  edc] wmain: Calling Computerconnector::ShowWizard()
[10/24/2016 15:11:38  edc] CComputerconnector::ShowWizard: Initializing common controls
[10/24/2016 15:11:38  edc] CComputerconnector::ShowWizard: Done initializing common controls
[10/24/2016 15:11:38  edc] Displaying the wizard
[10/24/2016 15:11:38  edc] CComputerconnector::AnotherInstallationErrorDlgProc: IDD_ANOTHER_INSTALLATION_ERR Page Initialization
[10/24/2016 15:11:38 1054] CComputerconnector::Run: Installation is ready to run
[10/24/2016 15:11:38 1054] GlobalData::Initialize (192.168.1.151, , C:\Users\BPOWELL.JMS\Downloads\ComputerConnector(192.168.1.151).exe, 1033)
[10/24/2016 15:11:38 1054] ExpandEnvironmentStrings return (C:\Windows\Temp\Client Deployment Files\)
[10/24/2016 15:11:38 1054] CComputerconnector::Run: Running Task: Id=1 Description=Downloads the Setup.cab file
[10/2... Read more

Read other answers
RELEVANCY SCORE 64.4

I am trying to add one of my XP Pro PC's to my new domain... Only not successfully... heres the scenario...
On the XP Pro PC I right clicked my computer, clicked properties, then the Computer Name tab. From here i click the Change computer name button and selected the Domain radio button. I then entered the name of our domain (minus the .xxx) and clicked OK. I then get this message:
The following error occurred attempting to join the domain "Moore":
the specified server cannot perform the requested operation.

If anyone can help, i'd appreciate your input!!!
 

A:Can't connect XP Pro to Domain (on Server 2003) Please Save Me!

Make sure DNS setup on your client pc is your server IP address.
 

Read other 2 answers
RELEVANCY SCORE 64.4

Hello. I'm trying to connect my Windows 7 Professional computer to a Windows 2000 Server. Both are located on my network under the same router. I have already configured the LAN Authentication Level. I get the following error when attempting to join the
domain:
The following error occurred attempting to join the domain "DOMAIN":
An attempt to resolve the DNS name of a domain controller in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain. For information about network troubleshooting,
see Windows Help.

Thank you for your help!

Read other answers
RELEVANCY SCORE 64.4

I am trying to add one of my XP Pro PC's to my new domain... Only not successfully... heres the scenario...
On the XP Pro PC I right clicked my computer, clicked properties, then the Computer Name tab. From here i click the Change computer name button and selected the Domain radio button. I then entered the name of our domain (minus the .xxx) and clicked OK. I then get this message:
The following error occurred attempting to join the domain "Moore":
the specified server cannot perform the requested operation.

If anyone can help, i'd appreciate your input!!!
 

A:Can't connect XP Pro to Domain (on Server 2003) Please Save Me!

Read other 6 answers
RELEVANCY SCORE 63.6

Hello,
I am having problems remotley administering my domain. I am using a vista computer to administer my domain remotely. When I try to open the domain users and computers appalet I get the message that says " naming information can not be located ...". I know that DNS is running (maybe not correctly) and that my computer logged on to the domain. DNS is the only thing that I can think as the problem. I can log onto OWA by typing in the ip address but I can not use the admin tools. Please help

Thank You
 

A:Can not connect to the server 2003 domain from the vista client

Well, how about fixing the DNS? Without working DNS, you can pretty much forget about doing anything with AD.
 

Read other 2 answers
RELEVANCY SCORE 58.4

We have found recently that our Windows 8.1 clients are unable to connect to Server 2012 R2 shares (SMB 3.02). When trying to browse to them in Explorer we get "Windows can't find <UNC path>". Windows 7 clients can still connect to these
shares, only our 8.1 clients are affected. Attempting to access using the IP address instead of the host name makes no difference.
The 8.1 clients can still connect to shares on 2008 R2 servers. Server 2012 R2 to Server 2012 R2 also works.
No changes have been made to the clients or to the group policies which control them that could readily explain this issue.
Any advice on where to start troubleshooting this would be appreciated.

Read other answers
RELEVANCY SCORE 58

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers
RELEVANCY SCORE 56.4

I've been surfing for an answer a few days now on "How to connect windows 7 to windows 2000 server Domain.> I already added the Computer Name and User on the Server.> I already changed the "Network security: LAN Manager authenticaion level" and "Minimum session security for NTLM SSP based (including secure RPC) Clients  and Servers."> I disabled the Firewall on Windows 7.*** I'm just a Beginner on Networking ******The weird thing is, I can see the Computers on the Network and I can Open the Shared Folders on the 2000 server, but when I open the Sub-Folder it hangs (Using Quad-Core, Windows 7 Pro and not part of the Domain). But I have another computer running in Windows 7 Pro with Core 2 Duo processor and can easily open the Folders on the Server with no problem at all. I don't know why is that happening.***I hope you can help me.Thank you.

A:Can't connect Windows 7 Pro to Windows 2000 server Domain.

I know you have add the computer name and user name on the server, but you did not join the computer to the domain. Therefore if you try to access the share on the server, actually it accesses with an account of the server system. If you log on with Administrator in Windows 7, you need to set the password the same as the Administrator's password of the Windows 2000 system.
Also you need to change the NTLM authentication level in Windows 7.
Network security: LAN Manager authentication level
Please change the NTLM authentication level to ?Send LM & NTLM - use NTLMv2 session security if negotiated?. Please refer the following article.Arthur Xie - MSFT

Read other 33 answers
RELEVANCY SCORE 56.4

Dear Community,

My company use around 700 desktops and laptops on a domain. our file server has a home share drive that the AD links to and then maps when a user logs onto any machine when using their domain account. my problem when I log onto my normal laptop
it says network name is no longer available. when I log onto another machine it connects and maps normally. all other servers UNC name works normally. I can ping it by DNS and IP and can RDP to it but not see any shares.

Please can you help?

Read other answers
RELEVANCY SCORE 55.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 54

The following Structure is a representation;
PC1 - IP 10.0.0.10 - FQDN PC1.DOM.LOCAL
PC2 - IP 10.0.0.20 - FQDN PC2.DOM.LOCAL
SRV1 - IP 10.0.0.5 - FQDN SRV1.DOM.LOCAL - File Share 'FLDR1' / USR1<ReadOnly>


SRV1 has a folder, FLDR1, being shared for read only access to user USR1.

PC1 and PC2 logged on as Domain User USR1.
PC1 is able to connect to SRV1 to see and look in FLDR1.
PC2 is unable to connect to SRV1 to see and look in FLDR1.
Now there are multiple means of connecting to SRV1 to see the share FLDR1.


The following connections were done in combination with the following methods;
Method 1 - via logged on Domain User CMD Prompt with 'NET VIEW'.
Method 2 - via logged on Domain Administrator CMD Prompt with 'NET VIEW'.
Method 3 - via logged on Domain User Explorer Window.
Method 4 - via logged on Domain Administrator Explorer Window.

Connection 1 - via Server Name.
Connection 2 - via Server IP Address.
Connection 3 - via Server Fully Qualified Domain Name.


Now that the stage is set, going to the fun part...

Testing from both PC1 and PC2...
-------------------------------------------
PC1 : Method 1 - Connection 1 - Success
PC1 : Method 1 - Connection 2 - Success
PC1 : Method 1 - Connection 3 - Success
PC1 : Method 2 - Connection 1 - Success
PC1 : Method 2 - Connection 2 - Success
PC1 : Method 2 - Connection 3 - Success
PC1 : Method 3 - Connection 1 - Success
PC1 : Method 3 - Connection 2 - Success
PC1 : Method 3 - Connection... Read more

Read other answers
RELEVANCY SCORE 54

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale  USB to install  ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

Read other answers
RELEVANCY SCORE 54

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 54

Hi Experts,
Could someone please help me how to copy file from Windows 2012 server to Linux using rsync.

Read other answers
RELEVANCY SCORE 53.6

Hello everyone. I really hope that you can help me. You are my last hope.

I maintain about 30 domain computers. Recently when users try to log in on most of them the following error appears frequently:

"Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or because your computer account was not found. Please try again later. if the message continues to appear, contact your system administrator for assistance."

I have seen that this error appears only in the computers with Windows XP and not in the computers with Windows Vista or 7. We have 2 domain controllers.

Please let me tell you about the ways I tried to resolve this problem and their results:

- on some computers, after several restarts the users are able to log in, but if they restart or shutdown after that the error appears again; this worked for some computers, but I do not know if the error will appear again in the future.
- on some computers, when i disabled the windows firewall or allowed all kind of ICMPs it was resolved, but this did not work for all the computers and I do not know if the error will appear again in the future.
- I unjoined and then rejoined some computers from the domain and it was resolved but after restarting the error appears again.
- If I unplug the network cable the users can log in but after restart the error appears again.
- I have tried to reset the user password and computer on the Active Directory for some users and... Read more

A:windows cannot connect to the domain, either because the domain controller is down...

Read other 16 answers
RELEVANCY SCORE 53.6

Hi, I'm a DBA and hope to help people with there database questions. However networking has always been my weakest area and I'm trying to change that. However, I've gotten in way over my head with this one. My kids and I built a server and I've installed Windows Server 2012 Data Center Edition on it with the intention of making it our DC and DNS server as well as to host some hyper-v instances. However, I can't seem to get this thing to work. Everything I've read tell me I have to give it a static IP but every time I try it loose connection to my router. I finally relized that I had to make the IP on the same subnet as the router. My router is 10.0.0.1 and the DHCP ip my server was receiving was 10.0.0.18 so I figured I'd make it 10.0.0.50 and set the scope in my router from .2 -.49 but that didn't work. I really don't know what I'm doing and the network guys are work are trying to help me but it's not working and I live almost 50 miles from my office. Please help.
 

Read other answers
RELEVANCY SCORE 52.8

- I have created GPO in domain to bloc usb drive but it didn't work with window 8.1 or latter, window 7 work fine. why?

Read other answers
RELEVANCY SCORE 52.4

Hello, I own my own IT consultation and management company and I have a few clients whom I will be upgrading their Servers to Server 2012. I thought it a good idea to have a place on this website to talk about and gives tips about Windows Server 2012. Please Fill out the poll so the Moderators can see what kind of interest the community has in this suggestion. Thanks!

A:When are we going to start a Server 2012 (Server 8) Forum?

Not a lot of interest unfortunately. Let me think about it and I will see what we can do.

Read other 2 answers
RELEVANCY SCORE 52.4

Hello Experts,

I have single AD Forest, 1 root domain and 4 child domain which having parent child trust with each other

Windows 2012 Functional Level

We find in some security tool that SID Filtering is not enabled on 4 child domain.

Please suggest is there any risk of enabling SID Filtering on domain level and how to do that from Root domain to child domain
Early response will be really appreciated

Thanks, NG

Read other answers
RELEVANCY SCORE 52

Can Microsoft please provide methodology for setting up Windows Event forwarding (Sender initiated) for a Domain Controller based on a Windows Server 2012 R2 Core installation? Unfortunately all of your documentation relies on using the local Event
Viewer GUI to set this up. Connecting Event Viewer from a full Server 2012 installation to a Core Installation loses this ability entirely. The only option I've tried to employ so far leverages an .xml file, but I am not sure it is working correctly.

Please note: this is for Windows Security Event ID 4776 ingestion.

Read other answers
RELEVANCY SCORE 52

When imaging HP EliteOne 800 G1 All-in-One  (Intel I217-LM NIC) by Windows 10 task Sequence, Domain Join stage fails every time. It was imaged with Windows 8.1 without any issue.  Same task Sequence works on HP 800 Mini (Intel I217-LM NIC) and other system from different vendor. Could I get some help please? Regards

A:windows 10 Task Sequence Not Join Domain (SCCM 2012 R2 SP1)

Hi,  I'm having the same problem for both the g1 800 and G2 800 EliteDesk Mini 35w.  Did you have any luck resolving this?  Thanks.

Read other 1 answers
RELEVANCY SCORE 51.2

Windows 2012 Verification of prerequisites for Domain Controller promotion failed and gave the below error(In computer management local group and user option is not there as suggested by a solution!)

"Verification of prerequisites for Domain Controller promotion failed. The local Administrator account becomes the domain Administrator account when you create a new domain. The new domain cannot be created because the local Administrator account password
does not meet requirements.

Currently, the local Administrator password is blank, which might lead to security issues. We recommend that you press Ctrl+Alt+Delete, use the net user command-line tool, or use Local Users and Groups to set a strong password for the local Administrator
account before you create the new domain."

A:Windows 2012 Verification of prerequisites for Domain Controller promotion failed

You need to have a password before you begin. Arnav Sharma | http://arnavsharma.net/ Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Read other 6 answers
RELEVANCY SCORE 51.2

I have a child domain server03 [branchoffice.welber.com], that is part of a parent domain server02 [welber.com], right now the main DNS server is on the parent domain server02 and server03 uses this as it's DNS server.

How can I setup a Enterpise wide compatible DNS server on server03 so that if the link is cut between server03 and server02, all local users will continue to be able to authenitcate properly with server03, that this will not interfere with operations when server02 and server03 are connected.

I guess I would list the first DNS server on server03 as server02 leaving as it is, then set the 2nd dns server to server03 once it's setup correctly.

Thanks for your help.
 

A:Configuring DNS server for a child domain server

I think you're getting DNS and Active Directory confused.

Are you looking for authentication, AND name resolution - or simply authentication?
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hello,
I created the following performance counter using logman.exe. 

logman.exe create counter US_Triton_Perf_Log -b 9/23/2015 09:30:00 -e 9/30/2099 18:30:00 -r -s $server -si $frequence -cf $folder\$server.txt -f $logtype  -o C:\local\logs\Perfout_$Server --a -v mmddhhmm  -rf  $max_duration

When I do this across multiple servers specifically for Windows Servers 2008/2012, the counter is created to repeat and run everyday at 930PM and stops running everyday at 430PM. This works perfectly fine as intended. However, When I do this for a Windows
2003 server, my created counter is very different.
For example, in this case, I have set to the counters to start at 930AM and end at 1830PM, because I have set a maximum duration of 9 hours, the job terminates and begins on the next day, since I have the repeat option on. However, this does not apply to
our 2003 server; logman creates the job to run once a week in this case it would be on a Wednesday. In addiiton, I noticed that the job doesn't not even start at it's indented time. It actually does not start at all. I also notice that the jobs on all windows
2003 servers are created in a pending status, which then prevents me from removing the counter remotely. 

I would like to know if windows 2003 is capable of working like my win 2008/2012 servers using logman, and if historically, the job has to be kicked off through scheduled task. 




Both Jobs are using the same criteria, but a... Read more

Read other answers
RELEVANCY SCORE 50.8

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 50.4

Hi,
I would like to give software Installation restriction for Domain Admin users but he can have all of remain admin rights.
If he want to install any software it should be ask for password.please suggest to me is there any Group Policy for that one.
Server : windows 2012 R2
Clients : windows 10 

Read other answers
RELEVANCY SCORE 50

Hi,
I would like to know how to configure a Windows Server that will host a windows Diskless Client, I've read a lot of forums and blogs regarding this subject and I even tried to applied those summarized guide but until now I'm still stuck, and I hope someone
in this forum can help me or give me a detailed guide to this particular subject. I would really appreciate whatever suggestion or support that may give to me. 

Thank you,

Read other answers
RELEVANCY SCORE 49.2

is it possible to point my domainname.co.uk to web server on one ip and ts server on another?
cheers
 

A:point domain name to web server and ts server on different ips

Read other 7 answers
RELEVANCY SCORE 49.2

hi guys, I try to make Win 2k3 server to be a member of Domain win2k server but I got an error message ,
" The local policy of this ( 2k3 server) system does not permit you to logon interactively"
what should I do??? Any ideas?

thanks for help EGL
 

Read other answers
RELEVANCY SCORE 48.8

Hello HP forum,I want to deploy a wds server with the Thinclient recover tool.So that i can reach the image without usb stick, and from another location.I hope you can help me with this.Kind regards,Marc

Read other answers
RELEVANCY SCORE 48

I want to network the server LG Ncomputing monitors directly on our Local network using Cat 6 Ethernet cables, so that I could use the same software licenses as on server with around 4 more users connected. (My Computer monitor has a Cat 6 cable point with the Keyboard and mouse points too)

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 32 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2911 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Hard Drives: C: Total - 83113 MB, Free - 53941 MB; D: Total - 34579 MB, Free - 3989 MB; E: Total - 34579 MB, Free - 10957 MB;
Motherboard: Sony Corporation, VAIO
Antivirus: Windows Defender, Disabled
 

Read other answers
RELEVANCY SCORE 48

I have windows server 2012 installed on my vmware running ad, dhcp and dns.
after that I installed the client running windows 8.1.
but when I try to join the domain it says that the domain could not be found.
so I hit ipconfig in my cmd on the windows 8 and it didnt recieve any ip from my dhcp its ip address is169.254.153.23. so basicly my dhcp didnt give me any ip adress since my server is on 192.168.7.128 network subnetmask 255.255.255.192.
in the virtual machine setting I have both network adpters set on bridged: connected directly to the physical network.
when I open the dhcp on my server I have a red arrow pointing down on the ipv4 and ipv6 option but since I cannot ping my server at all I dont think its my dhcp but my vmware network.
does somebody know how to fix this?

sorry for my bad english
 

Read other answers
RELEVANCY SCORE 48

Hi,
I became a member of dreamspark simply because they offer Windows 8 for free. I became a vertifyed member only to find out that they dont offer Windows 8 for free to Students. However they do offer Windows Server 2012 free to student.

what is it?? Can i use it as Windows 8?

A:What is Windows Server 2012

Hello Mitchell,

Windows Server 2012 is an operating system like Windows 8, but designed for servers.

Microsoft | Windows Server 2012

Read other 17 answers
RELEVANCY SCORE 48

I have just installed Windows 8/8.1 - first time user
I just installed SQL Server 2012 and rebooted.

I can't find where SQL Server management studio is located. I've looked on the start screen and I've looked on the Desktop. I can't find an Icon to run it anywhere.

Any ideas?

A:Can't see SQL Server 2012 icons

While in the Start screen type "sql" and see if anything pops up. If so, and it's what your looking for, pin it to the Start screen.

Read other 2 answers
RELEVANCY SCORE 48

Hi 
I have recently installed a server 2012 and configured remote access and users are able to access RDP from all clients. Recently Windows 7 machines are not able to access the remote desktop, its shows an error "This computer can't connect to the remote
computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. " I have disabled the network level authentication from local policy but the issue still exists.
Windows 10 machines are able to connect the remote desktop.  
Please help me to resolve the same. 
Thanks.

Read other answers
RELEVANCY SCORE 48

Hello all,

I know this is a forum dedicated to Windows 8/8.1, however Im having some issues with Server 2012 R2. I know it is very similar to 8.1 so maybe someone here can help me or at least give me some good ideas. Im having a hard time finding solutions online. If someone knows of a better place or forum to go to for this, please let me know.

Anytime I download software to install on the server I get this error message:

It happens with just about any software I download, doesnt matter what it is. Also, when trying to download something in Firefox, a lot of times it will tell me that the download failed almost immediately. The account Im using is a member of the administrators group. Ive tried restarting, running as administrator, etc. The only thing that seems to work is shift+right click -> run as a different user and running it as the built in admin account. Then most of the time it will allow me to install software or download software with Firefox.

Anyone have any ideas?

EDIT:

Something I forgot to add was if I do get it to download to my own user downloads folder, everytime something is downloaded the permissions are automatically set so I dont have permission to execute the file. This is what Im seeing in the security tab and permissions dialogs:

Read other answers
RELEVANCY SCORE 48

Hello,
 
I've been going crazy trying to help troubleshoot a BSOD.  I've used Bluescreenviewer to analyze the dump files, but I can't find a good solution.   I've attached images of the dump files from bluescreenviewer, and done searches on the errors referenced, NTOSKRNL.EXE and STORPORT.SYS.  We've updated all of the drivers, but I'm about to recommend driver verifier as well.  Please help!
 
Thanks,
 
cxzander

A:BSOD in server 2012 R2

These are both STOP 0x133 errors.  There's a bit of info on them on my webpage here:  http://www.carrona.org/bsodindx.html#0x00000133
Even more articles here (eventually I'll put them on my webpage:0): 
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/11184-dpc_watchdog_timeout-debugging.html
https://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/9310-dpc_watchdog_violation-0x133.html
https://blogs.msdn.microsoft.com/ntdebugging/2012/12/07/determining-the-source-of-bug-check-0x133-dpc_watchdog_violation-errors-on-windows-server-2012/
https://bsodtutorials.wordpress.com/2014/02/12/debugging-stop-0x133-and-dpc-internals/
http://bsoddebugging.blogspot.com/2014/09/0x133-dpcwatchdogviolation.html
 
Please run this report collecting tool so that we can provide a complete analysis:  http://omgdebugging.com/bsod-inspector/
When done a Notepad document will open with the name of the file and it's location. (By default it'll be a .zip file located on your Desktop)
Simply upload the .zip file with your next post and we'll move on from there.

If it doesn't work for you, then please try this:  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
It's OK to ask for Driver Verifier if this isn't a production server (as it'll create downtime and also may slow the system down).
If it is, see if they can schedule some time to run Driver Ver... Read more

Read other 0 answers
RELEVANCY SCORE 48

Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew

A:windows server 2012

  
Quote: Originally Posted by ascomputers


Hi all,

I've just purchased a HP micro server (?100 cashback deal) as want to learn windows server 2012 and also look to setup a home server.

can anyone recommend or point me in the direction of books, videos on where i can learn about installation / setup and maintaining a server setup for either home and in a business environment?

Many Thanks
andrew


What version of server 2012 do you have? Also what client operating systems do you have? Windows 7 Home premium, professional, ultimate?

This can affect what services you can offer to clients.

Josh

Read other 9 answers