Over 1 million tech questions and answers.

x230 Last update stops at 91%

Q: x230 Last update stops at 91%

RELEVANCY SCORE 200
Preferred Solution: x230 Last update stops at 91%

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: x230 Last update stops at 91%

What is your machine type and model and current OS?Please locate c\programdata\Lenovo\SystemUpdate\logs folder..zip this folder and attach in a post reply.

Read other 3 answers
RELEVANCY SCORE 59.6

So the past couple of days I have noticed that the touch screen on my laptop hasn't been working like it use to. I'll be writing notes or homework in tablet mode or I'll be swiping in normal mode and about half of my writing, taps or swipes won't be recognized. It's really frustrating especially since it causes me to miss some notes in class. I have tried restarting it and that hasn't helped. I did factory reset it a few weeks ago, but I made sure to fix all my settings and calibrate everything after I did that. The touch screen was also working perfectly fine just last week. It just started happening after booting up one day. Does anyone know what I could do to fix this? I would send it in, but my warranty expired a few months ago.

Read other answers
RELEVANCY SCORE 54.8

I had updated the Windows 10 April Update on my Thinkpad X230. I use Bitlocker to encrypt C, D disks. Before update Windows, I suspended Bitlocker function on C, update all newest drivers downloaded from Lenovo for Thinkpad X230 (BIOS, Firmware, ...). After update Windows 10, I can use my laptop in some hours, then I shutdown it. However, from this time, I cannot boot Windows, it only boot on some seconds and automatically turn off. I use USB Windows to go to boot my laptop, then turn off Bitlocker in C drive, and I can boot and use my Thinkpad. Unfortunately, when I turn on Bitlocker again, my Thinkpad X230 cannot boot again. Any idea for me? Please don't tell me turn off Bitlocker.

Read other answers
RELEVANCY SCORE 50.4

I have a X230 Mod 2325F51. I had problems with my battery and therefore I used the BIOS update CD with a USB CD-ROM Drive to update the BIOS. Now it shows "Flashing the Embedded Controller... Please do not Power off!" since an hour or so. Any advise?

Read other answers
RELEVANCY SCORE 50.4

Hello everyone, Recently I purchased a second-handed ThinkPad-x230 with part number of 2324LZ4. The BIOS is oddly old (G1ET32WW), so I went to the support page and downloaded the latest BIOS update utility from here http://support.lenovo.com/us/zh/downloads/ds029187 with the version G2ETA8WW. When I run the utility, I got an error message "BIOS directory cannot be found". I also tried the USB update method, also similar message and to no avail. My question is, 1. It seems that the newest BIOS does not compactible to my x230 since the version starts with G2 while mine starts with G1. Is my assumption correct?2. If so, where could I found the right image?3. I found someone on the internet successfully flashed CoreBoot to replace the original BIOS. Is it safe? Thank you for your attention.

Read other answers
RELEVANCY SCORE 50.4

My X230 with 6 cell 44+ battery was working good. Earlier this week, lenovo system update suggested a battery firmware update and I clicked and updated. After the update, the battery is completely dead. Don't understand how this can happen. Anybody has any ideas? This is the original battery and has been working good and still holds about 2 hours charges before its sudden death.

Read other answers
RELEVANCY SCORE 49.6

Hello,I'm trying to download newest BIOS Update Utility for my X230 https://support.lenovo.com/pl/en/downloads/ds029187 after download I checked checksums of downloaded file and they didn't match. I think I eliminated an error on my side, as I downloaded and checked this file on two different computers, on two different systems(Windows and Debian) and using two different ISPs. Every time checksums were wrong. Can someone from Lenovo look into this problem?Has anyone else have this problem as well?

Read other answers
RELEVANCY SCORE 49.2

Hi everyone, Last night I updates the camera and smart card drivers from Lenvo website. Immediately after the update, the camera simply stopped working. I have tried multiple things since then, including uninstalling and re-installing the driver multiple times, trying to change the driver defaul USB Video Device, etc. But now I can't even see the camera listed in the Device Manager even after checking the Show Hidden Devices option. Let me know if someone has any idea what to do about this. Thanks!

Read other answers
RELEVANCY SCORE 47.2

 hi,i just wanna know if i can to install normal ssd drive and msata card drive in my x230 laptop Many Thanks 

A:x220 and x230 , can i install normal ssd drive and msata card drive in my x230

yes

Read other 1 answers
RELEVANCY SCORE 44.4

I have an X230 i5 processor with a 1 TB SSD and I recently picked up a X230 with a i7 processor and a much smaller hard disk.  Can I just swap my big SSD into the new X230 (moving that version of Windows 7 Pro) and then install the smaller hard disk (with its version of Windows 7 Pro) into the i5 machine. (Will be swapping the memory so the i7 has the 16 GB and the i5 has 8 GB).  I know that if they were completely different computers this would not work, but since both are X230 will it work?  I'd rather not have to restall all the programs if I can avoid it!

Read other answers
RELEVANCY SCORE 42

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore. I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.I really would appreciate help. 

A:Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

 
Got it !!!!
If You are using notebooks with with hard drive larger than 700 GB you probably should update Intel Rapid Storage Technology Driver.
Here is solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02219204&cc=nl&lc=en&dlc=en&product
Download and install it.

Read other 97 answers
RELEVANCY SCORE 41.6

Hello,

My computer hangs on Windows Security Update KB953155 which is the first of 4 updates that do not install. First, I had to shut the computer off when it was hung this morning and restart it. Then I ran AU check 78 and then ran windowsupdateagent. It seemed to work so I went back to WindowsUpdate and allowed it to find the 4 updates needed for installation. Now, it hangs again at 23% on the SecurityUpdate. I am guessing that it is probably not a good idea to keep trying to shut it down with TaskManager and by resetting the computer. Yesterday, I ran a registry cleaner after I first noticed the shut down problem. It seemed to help the speed but this problem persists. Oh yea, I clicked on "stop installation" and it does not help.

New info: I turned off the computer manually while it was hung and restarted in SafeMode. Then I restarted normally. Then I went to control panel and turned off automatic updates to notify me when updates are available. Later I got a notice and tried to allow an update of Windows Media that had not caused problems before. It hung and is still running on 49%. I also got a message (that I had seen before) that "Host Process for windows services stopped working and was closed."

A:update stops shutdown

Anybody -- I'm still having problems with update. It will download but it won't install. As I said, I have used the repair utilities repeatedly but it does not fix it. Since another problem is the Hosts error problem, I had guessed that I might have a malware problem. I have downloaded sysinternals diagnostics Process explorer and I have done Hijackthis and fixed whatever the online diagnostic said was most important. Still I cannot download and install an update. Also, I cannot get the Problem Reports in control panel to connect to their fix solutions. It says that I am not online but I am. I have been working on this every spare moment for a long time. I have also used PCTools scanner and AV + Threatfire scanner. The AV found a Trojan and, I told it to fix it. Still I am having lots of problems. I cannot reinsall OS because I have (had) a hidden partition with the OS and when I made a copy of the drive to another drive, I went to NTFS and, according to Acer online help, I changed the file system from FAT32 which had the backup OS and it will not work now. I have downloaded the PE Vista utility but it will not run because it says it doesn't have a driver for my DVD. The DVD is pretty generic so I don't understand this.

Read other 3 answers
RELEVANCY SCORE 41.6

Am new to this.....computer trying to download updates....gets to 17 of 27 and stops....just sits there and runs....error number ends in 0016

A:Update Stops mid-download

Follow the link below to Microsoft fix it center. In option 1 select windows, option 2 choose install or upgrade software or hardware, in window next to option 2 choose windows update, and then in option 3 click run now next to fix the problem with Microsoft Windows Update that is not working.

This should get things straightened out.

Microsoft Fix it Solution Center: troubleshooting software issues

Read other 1 answers
RELEVANCY SCORE 41.2

Okay, I would first like to thank anyone who are willing to give their help on this matter, i really appreciate it.

Okay so here is the story...

I bought my HP envy 15 around christmas 2009.

around year later (3 days after the warrenty ended) i dropped my computer on the floor for the first time, and the harddrive got damaged.

i replaced the harddrive, and ever since, its been acting weird.

I installed windows 7 from my flash drive, and entered my key from underneath my computer, and windows said it was genuine, i thought everything was gonna be just fine from there.

around 2 weeks later, windows updater told me to restart, so i did.

when i then afterwards tried to boot up the computer, i got a bsod. I am sorry that i cant post the detailed details about the bsod, but i dont really understand how the program works, and i dont really think i can get it.

the bluescreen said SYSTEM_SERVICE_EXCEPTION and the error code was 0x0000003B.

it kept giving me this bsod everytime i tried to boot, even in safe mode.

not even the windows repair thing could fix it, not even a system restore to a WAY earlier point fixed it.

I had no clue how to fix this, so i thought to myself, oh whatever, i installed windows 7 again, and started over.

windows worked fine for a week.

and now yesterday, my computer started giving me bsod on startup AGAIN, except this time slightly different.

-the bsod was on for only like half a second, so i couldnt get a look at the error information.

-the w... Read more

Read other answers
RELEVANCY SCORE 41.2

I always get this, it will download all fine, but only install till the progress bar hits the half way point, and ill have to hit cancel.
 

A:Windows update stops at half way

Read other 6 answers
RELEVANCY SCORE 41.2

Hello. 'tis I, Richard yet again with another issue. This time, however, is with a PC I have just recently installed Windows 7 64 Bit Home Premium on. My PC specs are listed below.

Gigabyte Mobo GA 890 GPA UD3H
8 Gigs of Corsair 1600MMX Ram (I have 2 sticks of 4 Gig RAM, even though stupid windows says I only have 4GB)
Sound Blaster VX Sound Card.
AMX Phenom II X6 1090T Processor (and no, I do not have access to another CPU).

I have just recently acquired this PC, and I am currently trying to use Windows Update. But Windows Update doesn't seem to want to do anything. It just sits there searching for updates without doing anything at all. It doesnt stop searching for them to give me an error. I have included the Logs folder in zip format in C:\Windows. I've already tried installing Updates that are supposedly a "hotfix" without success. Help is appreciated. I can't play games (I am a PC gamer nerd) without Windows Updates (especially Direct X and other ones).

A:Windows Update Never Stops Searching

  
Quote: Originally Posted by Richardc267


Hello. 'tis I, Richard yet again with another issue. This time, however, is with a PC I have just recently installed Windows 7 64 Bit Home Premium on. My PC specs are listed below.

Gigabyte Mobo GA 890 GPA UD3H
8 Gigs of Corsair 1600MMX Ram (I have 2 sticks of 4 Gig RAM, even though stupid windows says I only have 4GB)
Sound Blaster VX Sound Card.
AMX Phenom II X6 1090T Processor (and no, I do not have access to another CPU).

I have just recently acquired this PC, and I am currently trying to use Windows Update. But Windows Update doesn't seem to want to do anything. It just sits there searching for updates without doing anything at all. It doesnt stop searching for them to give me an error. I have included the Logs folder in zip format in C:\Windows. I've already tried installing Updates that are supposedly a "hotfix" without success. Help is appreciated. I can't play games (I am a PC gamer nerd) without Windows Updates (especially Direct X and other ones).



okay, ignore this. Somehow my Windows Update has miraculously fixed itself! Nevermind!

Read other 9 answers
RELEVANCY SCORE 41.2

I run the Windows Update troubleshooter and it output the following:



What should I do to fix this issue?

A:Windows Update Never Stops Looking for Updates

Here ya go.

Windows Update will not update and I've tried multiple fixes

Read other 1 answers
RELEVANCY SCORE 41.2

I recently purchased a new HP Pavilion 17" laptop with Windows 10 Home already installed. When I went online the automatic updates began. The download to upgrade to version 1511, 10586 started but stopped at 60%.
How do I get the download to finish the download?
Prior successful downloads and installations include:
Update for Windows 10 x64-based systems (KB3106932) and (KB3135174),
Windows malicious software removal tool (KB890830).
Security Adobe Flash player (KB3135782)

Thanks

A:Windows 10 update download stops at 60%

Originally Posted by Rookie


I recently purchased a new HP Pavilion 17" laptop with Windows 10 Home already installed. When I went online the automatic updates began. The download to upgrade to version 1511, 10586 started but stopped at 60%.
How do I get the download to finish the download?
Prior successful downloads and installations include:
Update for Windows 10 x64-based systems (KB3106932) and (KB3135174),
Windows malicious software removal tool (KB890830).
Security Adobe Flash player (KB3135782)

Thanks



try this:

Windows Update - Reset in Windows 10 - Windows 10 Forums

Read other 1 answers
RELEVANCY SCORE 41.2

I was installing an update when right in the middle it stops. If I try to restart windows it fails on the windows loading screen, forcing me to restore windows which I hate to do because it messes up my Flight Simulator program. Please advice needed. I didn't get any error message it just completely goes dead and leaves me clueless.

A:windows update stops, and PC cant restart

Did you also try installing the Windows Update in the safe mode with network support. Did the same thing happened then?

Read other 4 answers
RELEVANCY SCORE 41.2

Okay, I would first like to thank anyone who are willing to give their help on this matter, i really appreciate it.

Okay so here is the story...

I bought my HP envy 15 around christmas 2009.

around year later (3 days after the warrenty ended) i dropped my computer on the floor for the first time, and the harddrive got damaged.

i replaced the harddrive, and ever since, its been acting weird.

I installed windows 7 from my flash drive, and entered my key from underneath my computer, and windows said it was genuine, i thought everything was gonna be just fine from there.

around 2 weeks later, windows updater told me to restart, so i did.

when i then afterwards tried to boot up the computer, i got a bsod. I am sorry that i cant post the detailed details about the bsod, but i dont really understand how the program works, and i dont really think i can get it.

the bluescreen said SYSTEM_SERVICE_EXCEPTION and the error code was 0x0000003B.

it kept giving me this bsod everytime i tried to boot, even in safe mode.

not even the windows repair thing could fix it, not even a system restore to a WAY earlier point fixed it.

I had no clue how to fix this, so i thought to myself, oh whatever, i installed windows 7 again, and started over.

windows worked fine for a week.

and now yesterday, my computer started giving me bsod on startup AGAIN, except this time slightly different.

-the bsod was on for only like half a second, so i couldnt get a look at the error information.

-the w... Read more

A:Please help! Windows stops working after update.

Hello and welcome. : )





Quote:
I bought my HP envy 15 around christmas 2009.

around year later (3 days after the warrenty ended) i dropped my computer on the floor for the first time, and the harddrive got damaged.

i replaced the harddrive, and ever since, its been acting weird.

....
it kept giving me this bsod everytime i tried to boot, even in safe mode.


1. HDD Scan HDDScan
2. Attach the CPU-Z screenshots of these tabs - memory and spd.
3. http://www.sevenforums.com/crashes-d...tructions.html

Read other 8 answers
RELEVANCY SCORE 41.2

Okay, I would first like to thank anyone who are willing to give their help on this matter, i really appreciate it.

Okay so here is the story...

I bought my HP envy 15 around christmas 2009.

around year later (3 days after the warrenty ended) i dropped my computer on the floor for the first time, and the harddrive got damaged.

i replaced the harddrive, and ever since, its been acting weird.

I installed windows 7 from my flash drive, and entered my key from underneath my computer, and windows said it was genuine, i thought everything was gonna be just fine from there.

around 2 weeks later, windows updater told me to restart, so i did.

when i then afterwards tried to boot up the computer, i got a bsod. I am sorry that i cant post the detailed details about the bsod, but i dont really understand how the program works, and i dont really think i can get it.

the bluescreen said SYSTEM_SERVICE_EXCEPTION and the error code was 0x0000003B.

it kept giving me this bsod everytime i tried to boot, even in safe mode.

not even the windows repair thing could fix it, not even a system restore to a WAY earlier point fixed it.

I had no clue how to fix this, so i thought to myself, oh whatever, i installed windows 7 again, and started over.

windows worked fine for a week.

and now yesterday, my computer started giving me bsod on startup AGAIN, except this time slightly different.

-the bsod was on for only like half a second, so i couldnt get a look at th... Read more

A:Please help! Windows stops working after update.

Its always a good idea to check your ram first. Take out one stick and see if that helps. If not then swap ram, take out one stick and leave the other stick in. Or borrow a stick of ram from a friend and try that.

Read other 1 answers
RELEVANCY SCORE 41.2

suddenly when I turn computer on, a pop-up says windows update and firewall has stopped working. I click on each and turn on with no problems. next time computer is turned on, same pop-up appears.

is there anything I can do to keep these programs running?
please advise,
thanks,
john

A:windows update and firewall stops

Hello,

What might have happened here is the Windows services for these programs have been disabled. This is an easy fix. Follow my steps below:

1. Press the Windows Key + R to open the Run dialog.
2. In the dialog, type "services.msc" (without the quotes). Figure 1
3. Locate Windows Update... Figure 2
3. ...and Windows Defender. Figure 3
4. Right-click on Windows Defender and select Properties.
5. Under Startup Type, select Automatic. Figure 4
6. Do the same for Windows Update. Figure 5

Restart your computer and you should be good to go.
If you are still getting the message, reply to this message.

EDIT: Woah sorry, instead of Windows Defender, find Windows Firewall instead and do step 5 for it too.

If you find my posts helpful, please help me out by pressing the little "Add to techhead287's Reputation" button at the top of this post. Thanks!

Read other 9 answers
RELEVANCY SCORE 41.2

Last night when I was going to bed I saw that Windows 10 needed to do an update. Now, this morning, I can't log in using my Pin. It no longer recognizes it. I'm not sure how to proceed and nearly my entire life is on that PC-- I can't even access my main email account because I've never bothered trying to figure out why I couldn't get it to work on my cell phone. I'm not sure what to do now.

/edit never-ending-- I didn't remember that I could sign in with my password instead and that worked.
 

Read other answers
RELEVANCY SCORE 41.2

I run the Windows Update troubleshooter and it output the following:



What should I do to fix this issue?

Read other answers
RELEVANCY SCORE 40.8

I use blood glucose meters connected to the USB port to upload daily blood sugar readings. All was working fine until I updated Windows 10 to the Anniversary Update. Now it's stopped working. I cannot see my meters on the laptop. The chipset drivers which Acer has available for download are over 12 months old. Should I download and reinstall to delete the Windows ones? Or is Acer fixing this problem and I should wait? I need to get this problem fixed so my health care professional can get my data.Thanks.Martin

Read other answers
RELEVANCY SCORE 40.8

I have an HP EliteBook 850 G3 works perfectly under Win10But as soon as I put the anniversary update on the machine does not restart (get the message saying Restarting and the spining circle) Or if I try to shut down. The screens dim and just the power light stays on.Can leave it like this over night and nothing changes. I have tried a clean install of Windows 10 Anniversary update.from  Windows 10 and runing the update both I get the same result. I have tried to run the HP Support assistant afterwards and I run everything it suggests, Have everything updatedStill no joy. Only to get it functional again is to downgrade to Win10

Read other answers
RELEVANCY SCORE 40.8

Hey, everyone. About a week ago I did a factory restore on my computer to go back from Windows 10 to Windows 7. My computer came with Windows 7 x64. Here is the basic system information for my computer:

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 215 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 4863 Mb
Graphics Card: NVIDIA GeForce 9100, 256 Mb
Hard Drives: C: 584 GB (544 GB Free); D: 10 GB (1 GB Free);
Motherboard: PEGATRON CORPORATION, VIOLET6
Antivirus: Avast Antivirus, Enabled and Updated

So anyway, I was able to download and install numerous Windows Updates but then it started doing this thing where it never stops checking for Windows Updates. In other words, it continues checking for Windows Update for hours upon hours and never finishes. I am not sure what to do to fix this. I ran the Windows Update Troubleshooter from Microsoft and it found a couple of issues which it fixed but it was unable to fix one other issue. I can't recall what that issue was at the time but I am going to run it again here shortly to see if it will do the same thing again. I'll report back to you what it says it cannot fix if the error is reproduced.
 

Read other answers
RELEVANCY SCORE 40.8

Just so you know. I received an automatic upload of Windows 10 update KB4038788 on Sept. 13. tried to use my scanner today and it would not function. Had to go in and remove this update for scanner to continue working. Within an hour the update loaded again. So I had to remove it again and turn off automatic updates. Hope this helps the next guy.
 

A:MS update KB4038788 stops scanner working

Thanks, Ive asked a moderator to edit your post title, to make it easier for others with scanner problems to find this topic at a glane.
 

Read other 1 answers
RELEVANCY SCORE 40.8

Good morning,

I cannot install a ZoneAlarm update. I am told -

>>c:\WINDOWS\Internet Logs\ErrorLog.tmp" could not be found. Access denied<<

Is there a way to recover this missing file.

I have looked into c:\WINDOWS\Internet Logs. ErrorLog.tmp is not there.

Best wishes, whatapalaver

A:Missing Errorlog.tmp Stops Zonealarm Update

I'd suggest that, to start, you uninstall Zone Alarm and then reinstall the latest version that's downloadable from their website.

Read other 30 answers
RELEVANCY SCORE 40.8

Good morning Experts! Windows Update continually searches for updates and never stops. This began about a month ago.  It states that updates have never been checked for and never have been installed. Thank you!

A:Windows update never stops searching for updates

#HPExpertDayThis is observed when a firewall is blocking the computer. Please check the firewall settings on the computer.

Read other 3 answers
RELEVANCY SCORE 40.8

Hi,
I've got me a new MSI P67A GD65 motherboard with an Intel i5 2500. Can't seem to get windows working right. So far I've installed on several hard drives, checked memory with BIOS tool, windows test and memtest86+, all passed.
The problem is that my usb (logitech) mouse stops working every now and then. It stops after it's been idle for a while (when i watch a movie or go out etc), or when windows update fails. Which it does a lot btw. It works fine after a reboot. A nice side effect of my not-working mouse is that windows can't shut down when it happens.
I also have experienced a nice amount of BSOD's since my upgrade, including:
Bad pool header
Page fault in nonpaged area
irql not less or equal
usb bug code
As this has worked with my older system, is this a windows or hardware issue?
Thanks

ps just installed zonealarm free, and it looked fine, but when it started scanning for programs, the mouse stopped again...?

A:USb stops working after idle, or update fail

hi
if you can post the BSOD error files one of the gurus will have a look for you please read this tutorial >>> BSOD - Posting Instructions >>> http://www.sevenforums.com/crashes-d...tructions.html

also please post more information on your system specs to help you speccy is a good program to download and use the info from there >>> http://www.piriform.com/speccy

Read other 8 answers
RELEVANCY SCORE 40.8

The system update wanted me to run the latest critical updates but now it has stopped at 91%. In the console window it says it is currently sending the update image to FW for verification and that I MUST NOT shut down my computer until it is done. Thus verification is at 79% and has been so for quite some time now. What should I do?

Read other answers
RELEVANCY SCORE 40.8

Hi

I've installed & updated Panda Platinum 2005 Internet Security on my laptop but now Microsoft Update can't download files to it.

I had the same prob a while ago on my PC (running Windows XP) & had to download a file that fixed the prob - only thing is I don't have a clue where that came from!!

Laptops running Windows XP and is curently on SP1 with no further updates (cos Panda is stopping me updating!). Can you help at all cos I'm stuck!!

Oh yeah, laptop is AMD Athlon 2500+ 1.86 GHz processor, 704RAM if that's relevant at all.

Thanks, Mark :o)

Read other answers
RELEVANCY SCORE 40.8

Hi,

Symantec seem to have a problem with Norton Internet Security 2003 blocking the Windows Update Page - not very handy if you want to keep your system updated.

I'm running Win. XP Pro SP1 with all updates so far until I recently installed NIS 2003. Symantec's solution is to UNINSTALL NIS => Update Windows => REINSTALL NIS afterwards - during this period your system is like an open door. Am I missing something here??
http://service1.symantec.com/SUPPOR...2dd3f0d5c9e3861165256c470073981f?OpenDocument

=======================================
Error: "You must be running a Microsoft Windows operating system in order to use Windows Update"

Situation:
Microsoft Windows and Office updates do not work after installing Norton Internet Security( NIS) 2003. While trying to install the Windows Update, the following error message appears, "Thank you for your interest in Windows Update. The Windows Update is the online extension of Windows that helps you get the most out of your computer. You must be running a Microsoft Windows operating system in order to use Windows Update". When NIS is disabled, both updates work fine.

Solution:
This problem has been reported to Symantec Technical Support, but we have not been able to reproduce the problem. The cause is not known, and there is no solution at this time. We will continue to track this problem, and this document will be updated if new information becomes available or a solution is found.

Workaro... Read more

A:(Solved) NIS 2003 Stops Win XP Pro SP1 Windows Update?

Read other 16 answers
RELEVANCY SCORE 40.8

Hello,
every time I try to run an update on my desktop Windows 10 Pro x64 (1703) to the latest patch (KB4022725), the update is stopped and withdrawn when the BSOD caused by dxgkrnl.sys appears every time after the reboot.

I have read the [SOLVED] BSOD Due to dxgkrnl.sys topic and tried to update all drivers (via device manager) - Intel Graphic Card driver was out of date, but it didn't help - the bsod appeared again after next try.

Perfmon report and Sysnative dumps attached.

Read other answers
RELEVANCY SCORE 40.8

I installed a fresh copy of Windows 7 64-bit SP1. After activation, I tried running Windows Update, it doesn't stop searching. What can I do to fix this?

A:Windows Update never stops searching for updates

Follow these instructions exactly.
First, set Windows Updates to never check for Updates.
Next restart your computer, then install KB3020369, if not installed.
Then install KB3172605.

Windows updates should return to normal. You can then reset your updates to automatically check for updates if desired

https://support.microsoft.com/en-us/kb/3020369

https://support.microsoft.com/en-us/kb/3172605

Read other 2 answers
RELEVANCY SCORE 40.8

I installed a fresh copy of Windows 7 64-bit SP1. After activation, I tried running Windows Update, it doesn't stop searching. What can I do to fix this?

Read other answers
RELEVANCY SCORE 40.8

Hi guys and girls

I have used my Windows 7 Beta since May, build 7100 (x64). Its fresh install and my computer is cutting edge flagship what you can buy. Windows has worked perfectly since May, but I used last windows update, shut down the comp, went to meet my parents, came back, started computer and nothing works. I can login, but cant start even a task manager. I booted it to safe mode and I ran Spybot + Regcleaner, its clean. Question whats wrong?!

I am one of these guys who doesn't use system restore, because I know what I am doing (I'm IT pro). But this is weird, because can't even run the simplest program on normal mode.

I only downloaded 3 critical updates, I don't remember well the descriptions, but they for vulnerability fixes.

B.R.
- omikron

A:Windows Update and W7 7100 stops responding

  
Quote: Originally Posted by omikron


Hi guys and girls

I have used my Windows 7 Beta since May, build 7100 (x64). Its fresh install and my computer is cutting edge flagship what you can buy. Windows has worked perfectly since May, but I used last windows update, shut down the comp, went to meet my parents, came back, started computer and nothing works. I can login, but cant start even a task manager. I booted it to safe mode and I ran Spybot + Regcleaner, its clean. Question whats wrong?!

I am one of these guys who doesn't use system restore, because I know what I am doing (I'm IT pro). But this is weird, because can't even run the simplest program on normal mode.

I only downloaded 3 critical updates, I don't remember well the descriptions, but they for vulnerability fixes.

B.R.
- omikron


Are you sure you didn't install something else, maybe a torrent, like say Restorator?

Read other 5 answers
RELEVANCY SCORE 40.8

Hello,
every time I try to run an update on my desktop Windows 10 Pro x64 (1703) to the latest patch (KB4022725), the update is stopped and withdrawn when the BSOD caused by dxgkrnl.sys appears every time after the reboot.

I have read the [SOLVED] BSOD Due to dxgkrnl.sys topic and tried to update all drivers (via device manager) - Intel Graphic Card driver was out of date, but it didn't help - the bsod appeared again after next try.

Perfmon report and Sysnative dumps attached.

A:BSOD (dxgkrnl.sys) stops Windows 10 update

Quote:





Originally Posted by excubitor


Hello,
every time I try to run an update on my desktop Windows 10 Pro x64 (1703) to the latest patch (KB4022725), the update is stopped and withdrawn when the BSOD caused by dxgkrnl.sys appears every time after the reboot.

I have read the [SOLVED] BSOD Due to dxgkrnl.sys topic and tried to update all drivers (via device manager) - Intel Graphic Card driver was out of date, but it didn't help - the bsod appeared again after next try.

Perfmon report and Sysnative dumps attached.




Hello,
I suspect this might be a HW issue.
Please list all your components with their exact model.

Kindly test your RAM with Memtest86+
https://www.tenforums.com/tutorials/...-test-ram.html

Let me know how it goes.

Read other 7 answers
RELEVANCY SCORE 40.8

Hi All,

I've been having a major problem with windows update for the last week or so, it's getting stuck "Checking for updates". Not only that, but I'm seeing this problem on 3 different installations with different underlying hardware. The 3 systems are:

1- VitrualBox (Linux Host) running Win7 Pro 32bit. This was last used July 2015 and was fully updated then.
2- Thinkpad X61 with SSD (which does NOT report 4k physical sectors/advanced format). Clean install this week of W7 Pro 64bit SP1 from official Microsoft retail disc, so no manufacturer extras.
3 - VirtualBox (Linux Host, different underlying hardware to install 1) running Win7 Pro 32 Bit, clean install this week. I did this one as an experiment after the other 2 failed to work.

All 3 systems exhibit the same problem when trying to update, the "Checking for updates" process never completes and after a period of activity, the svchost.exe process will sit at the top of the process display with unchanging memory usage and it will consume 100% of a single processor core, indicating to me that it is stuck in a single thread race condition. This continues to be the case even if I leave the computers for several hours.

I have used the automatic Windows "Fixit" for windows update on all systems, it did no good.

I have followed all of the instructions on this page:

https://support.microsoft.com/en-gb/kb/971058

to no avail.

I have used the SURT tool and run sfc /scannow. There are no error c... Read more

A:Windows update never stops checking for updates

  
Quote: Originally Posted by tim1mw


...the "Checking for updates" process never completes and after a period of activity,
~~~
I'd appreciate any suggestions,
~~~


Patience :-)

Set the computer not to sleep.
Manually start the check for updates.
Leave the computer alone for at least 24 hours.

For some people, the check for updates ends after 20 minutes. For others, it takes many hours. Lots of speculation; but no hard facts as to why this is happening. Perhaps you are connecting to busy servers.

If you want, delete your experimental VM and create a fresh one. Before checking for updates, manually download/install the latest Windows Update client: https://support.microsoft.com/en-us/kb/3083324 Then manually check for updates and leave it alone.

Read other 4 answers
RELEVANCY SCORE 40.8

I am using Win 7 and IE11. After KB 2898785, update was installed, I was no longer access my webmail accounts as I used to. At first I thought this had a different cause, but after installing and restoring to an earlier date, several times, it is obvious, that if I install this security update the problem returns. Is there anything I can do, or shall I just ignore this update and see if a later update fixes the problem?

A:KB 2898785 Update stops access of webmail

Any update can be deleted. Best to research to see what danger there is.

Read other 4 answers
RELEVANCY SCORE 40.4

hey guys, i really got a huge problem there. i'm a newbie here and i'd really appreciate it if someone can help me - the problem did not only start with installing vista sp1 which i did yesterday but already before with an update.
now i can't get rid of any updates with the uninstall function - i get an error message.

and even though the sp1 installed correctly (according to the information the install-wizard showed right after installing), my laptop just goes on an on trying to install it when i want to turn it off.

now what can i do? i'm really happy that my laptop did not seize to work completely but i can't accept the fact that it still tries to install the sp1 and i'm a little desperate

A:vista sp1 install stops at step 1 of 3, 99% - no update can be removed

Hi Markus. . .

Welcome to the Tech Support Forum - Vista Support!

I received your windows log. I looked at it briefly. Did you download and attempt to install SP1 or did it come to you through Windows Updates originally? Did you ever install SP1 - beta (test) versions within the last few months?

Were you logged on with an admin account?

regards...

jcgriff2

Read other 12 answers
RELEVANCY SCORE 40.4

Good Afternoon (UK) Time,

Java notification of old version on my computer Java (TM) 6 Update 7, remove to ensure security.

New update awaits ,but cannot uninstall Error 1719 Windows installer not correctly installed?

I've been downloading all week, why now, what's the solution,what made it change?

Sorry, lots of questions.

Can someone help please, ta very much!!

A:New Java Update, But ERROR 1719 Stops me! What's the Solution.

Hi,
Update to last post.

Actions Taken so far:-
MS-DOS

msiexec/unreg - Enter
msiexec/regserver - Enter
Enter

Did not work.

System Restore to 7.00 am
This well before problem, I think?

After these operations other software programmes uninstalled.

But Java still will not uninstall.

Message: Small Window.

C:\Config.Msi\30beba.rbs3:3

Then an OK button

small window:- 1:1712

That's it so far.

It would appear other progrAMMES CAN BE UNINSTALLED BUT NOT JAVA.

Read other 12 answers
RELEVANCY SCORE 40.4

HI,
I hope someone can help me!

Yesterday my Asus laptop that runs Vista 32 did an automatic update, I think it was for a service pack but I didn;t really pay much attention. When the computer shut down and then tried to restart it wouldn't restart and just showed a black screen and was scrolling through some jargon and then stops at:
!! 0xc01a001d!! 9258/90091 (\Registry\Machine\COMPONENTS\DerivedData\...)

I then manually **** down my computer and tried to start it in all safe modes so that I can do a system restore however when I start in safe mode it starts to load the windows drivers and then stops at
Loaded: \windows\system32\drivers\crcdisk.sys

What can I do to do a system restore. This Vista is driving me nuts I have never had a computer crash on me so many times as this computer that is only 12 months old. I do not want to have to re set everything up again! It's ridiculous!

How do I fix this?

A:Windows update downloaded and now computer stops at crcdisk.sys

Originally Posted by musicgirl


HI,
stops at:
!! 0xc01a001d!! 9258/90091 (\Registry\Machine\COMPONENTS\DerivedData\...)



This error suggest you have probably corrupted hdd.Diagnose your hdd by using on of these tool (appriopriate for your disk model) Bootable Hard Drive Diagnostics - Vox

Read other 3 answers