Over 1 million tech questions and answers.

Lenowo W530 - Nvidia k2000M - Cannot detect graphics card?

Q: Lenowo W530 - Nvidia k2000M - Cannot detect graphics card?

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didnīt work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-ø

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Lenowo W530 - Nvidia k2000M - Cannot detect graphics card?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 166.8

Hi,I have in the past had a lot of problems with my Nvidia K2000M on my W530. Windows have kept disabling this due to "code 43" (Yellow triangle by the display driver).I have solved this by reinstalling Nvidia drivers, but when this happened every 3 days or so, I started to suspect something was wrong. And I believe I was right.... I tried to uninstall the driver (probably a mistake) before reinstalling the driver, but now the graphics card cannot be detected at all. When I try to install Nvidia drivers I get the following error message: "NVIDIA Installer cannot continue. This graphics driver could not find compatible graphics hardware". I also tried to disable optimus in BIOS, and enabled discrete graphics to try to force the computer to find the NVIDIA graphics card, but this obviously didnīt work. The computer then starts up with low graphcis and bad resolution. Under "Display adapters" in Device Manager there is no card detected at all (As the Intel integrated was disabled). So, is my NVIDIA graphics card defective, or is there som other solution to try to detect it? PS! I Also did a system update through Lenovos update center. Updated firmware in BIOS etc. This did not solve the problem..... Thanks,-ø 

Read other answers
RELEVANCY SCORE 84

HELP. I tried uninstalling old nvidia drivers. When I put my new one in, there wasn't an old graphics card in place. I tried youtubing possible solutions. I'm considering taking my pc the best buy so they can hook it up, but I don't wanna spend more money. The power watts meet it's standard. I had to buy a new one. I KNOW it's in the right place inside, but my computer won't detect it. The PNY software DVD won't detect it. It says not found. I understand that you have to install a diver that's compatible, and I tried that, but it says checking system... and then It can't find it! It's been months. I uninstalled every nvidia driver or thing on my computer, which now makes my screen look small, which is really annoying. please help!
 

A:Computer won't Detect Nvidia Geforce 730 Graphics card

You need to tell use more about your computer, what is the make and model of it, what is the model of the motherboard, what is the model of the power supply? What version of Windows?

Is it the Geforce GT 730 you bought or something else? What is the intended use of the new graphics card?

And what graphics card or GPU did you have before adding this card?

Do you have the monitor connected to the new graphics card or do you by chance still have it connected to the integrated graphics that many computer have? It needs to be connected to the new card before turning the computer on.

Have you made sure the card is seated fully in the slot?

Have you tried using the latest drivers from the NVidia website: http://www.geforce.com/drivers

Do you have access to another computer to try the card to make sure its not defective?
 

Read other 1 answers
RELEVANCY SCORE 84

Hello, I recently performed a clean install of Windows 7 x64 Ultimate onto my computer. While doing so, I had to unplug my graphics card and use the onboard video, otherwise I'd get an error about unexpected restarts.

After installing, Windows 7 doesn't detect the graphics card (the card works, but it doesn't show up under the device manager and I can't install nVidia drivers). If I use the BIOS to switch to onboard video, then that shows up on the device manager and works fine, but I use this PC for gaming so I'd prefer to use the video card.

Any help would be greatly appreciated .

Graphics Card - nVidia 9600 GT
Motherboard - ASUS M2NPV-VM
CPU - AMD 64 4800+
RAM - 3GB

A:Windows 7 Doesn't Detect nVidia Graphics Card

Which drivers did you try, these?
NVIDIA DRIVERS 196.21 WHQL
Also, did you try running windows updates afterwards, specifically "optional" updates?

Read other 9 answers
RELEVANCY SCORE 84

Hello,
I have an alienware laptop with an nvidia 335m gt graphics card and it works perfectly for about a week. Then after an update, it can't be detected. This is the second time this has happened, the first time I just reformatted and it was back. Now after about the same amount of updates, it's not being detected again and the system reverts to one called "dell chipset family". The nvidia geforce program is still installed, however when I run it, it can't find the graphics card either. Please help lol I don't want to have to reformat every week because I'm not savvy enough to figure out what the problem is.

Thank you
Ricky

A:Cannot detect my nvidia 335m gt graphics card after update

You should not be installing this update.

Download the video drivers directly from Dell.

Uninstall any video drivers you have now.

Install the drivers you downloaded from Dell.

It will now be fixed.

Laptops are different, you need the driver from Dell and do not let windows update it.

Make sure windows is set to let you know about updates, but let you decide whether to install them, do not install any video drivers using windows update.

Read other 9 answers
RELEVANCY SCORE 83.2

Here's the deal,
I purchased a HP Pavilion dv9540us Entertainment Notebook PC and upgraded to Windows 7, after I got a virus and let Microsoft Techs into my laptop remotely in an effort to remove the worm and they deleted some key OS Files. So, they were kind enough to give me Windows 7 Professional & install Office 2010, but failed to inform me that upgrading from Vista to Windows 7 would render my Nvidia graphics card useless. So, here I am trying to figure out what to do and where to get the correct Drivers to get my HDMI & Other ports working again. I tried talking to HP, but to them it's a matter of national security & if your not willing to "Grea$e the wheels" they're not willing to give up the "seceret." Although, They did tell me that I will need to download a chipset driver to my HP Pavilion dv9540us that is compatible with Windows 7 and then my Nvidia graphics card will be detectible by my Device manager. Then I would need to update my Nvidia Drivers, Reboot, and I should be up and running. Sounds good, but what is the HP Driver I need? Does anyone have a link or any better input?
Because, I am about ready to Smash this thing or hunt down some HP Support guy.

A:HP Pavilion 9540us Windows 7 OS, won't detect Nvidia Graphics Card

Welcome to seven forums american n need

Please fill in your specs by clicking this link Fill in your Computer specs

To know what your computer specs are do the following:
Click on the start
Type in System Information in the Search box
Copy and paste it here as well as your system specs in user cp.
System Info - See Your System Specs

Post back for further suggestions.

Read other 1 answers
RELEVANCY SCORE 78.8

I'm trying to figure it out, but my ThinkPad W530 is restarting itself once and once, i'm trying to disconect everything WWAN, WAN, DVD, SDD, but the same problem.Execute diagnostics and everything is okTry to install Windows 7 and Works fine BEFORE load driversTry to install Windows 10 and restarts itselfTry to use ONLY integratet graphics Nothing Same ErrorTry to use ONLY Discrete Graphics, nothing Same errorHelp Please

Read other answers
RELEVANCY SCORE 77.2

So, I havent really understood this with two dispaly adapters. On my Thinkpad W530 I have the Intel HD Graphics 4000 and the Nvidia Quadro K2000M Does the computer use both of these? How do I choose which one to use? It looks like mine is using the Intel, because as I right click on the desktop and go to Screen Resolution -> Advanced Settings I only get the Intel Controlpanel as an option (Not the Nvida). When I right click the deskop and choose Nvidia Controlpanel I get the error message: "NVIDIA Display settings are not available - You are not currently using a display attached to an NVIDIA GPU" I am totally lost  The laptop works perfectly fine, but I would of course like to use the best display adapter, if itīs possible. So it would be much appreciated if someone could explain this to me   












Solved!

Go to Solution.

A:W530 - Intel HD Graphics 4000 vs Nvidia Quadro K20...

Hi Oyvindpe,
 
Welcome to Lenovo Community!
 
Change the setting in BIOS ? Config ? Display ? Graphic Device to Discrete Graphic and check.
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 74

Can someone tell me what's the difference between 1000m and k2000m ?!? becouse i have a Lenovo w520 / 15,6  2720qm 2,2ghz/16gb ram with 1000M and i found another laptop W 530 / 15,6. 3820qm 2,7ghz 8gb ram with K2000M ! should i buy that laptop ?!?

A:Nvidia quadro 1000M vs K2000M

any advice would be apreciate !

Read other 1 answers
RELEVANCY SCORE 70.8

If the laptop is on and the lid is closed and then opened, the screen will remain black until either powercycled or an external VGA monitor is attached.  The screen returns immediately once the VGA monitor is connected, and it stays lit when the external monitor is disconnected.  This happens whether or not the user is logged in.  The power options for Windows are set to "Do Nothing" when the lid is closed for both on battery and plugged in.  This happens whether or not the laptop is plugged in.
When the lid is reopened, the backlight comes on, but the screen remains black.  The OS accepts input -- if the screen is black and I type on the keyboard and then connect an external monitor, I can see the results of the typing.  Doing Fn+F8 does not affect the black screen.
This is a fresh install of Windows 10 Pro Build 1703, Bios A16, with the latest NVIDIA Quadro K2000M driver installed (v21.21.13.7735, 1 May 2017) and the other latest patches and drivers.  This does seem to be a software/driver issue because if Windows is put into hibernate mode instead of fully rebooting after the lid operation, the Dell logo will appear on the screen prior to restoring from hibernation, and the black screen will then continue after the UEFI boot has completed.
Apart from always shutting the system down completely before closing the lid or keeping a VGA monitor on hand, is there another solution to this issue?
chris.

Read other answers
RELEVANCY SCORE 70.8

I have a W530 with a NIVIDIA Quadro K1000M graphics card running Win 10 Pro. I have an external monitor connected. I think the external monitor uses the K1000M and the internal monitor uses the Intel graphics card. The only options I have are: Extend these displaysShow on display 1 onlyShow on display 2 only There is no option to mirror the displays. How can configure my W530 so I can mirror the displays when I have a projector connected instead of the external monitor? Thanks.

A:How mirror displays on W530 with dicrete graphics card?

Hi Bazsl1, 
 
Welcome to Lenovo Community! And happy to have you here.
 
As I understand that you are facing issue while duplicating the Display in your W530
For this enter in BIOS mode Config> Display>Graphics Device>Discrete Graphics Save and Exit changes.
To use Duplicate Display in NVIDIA Optimus Mode check this link.
 
I hope the above information helped you.
And feel free to post in Lenovo Community Forums if you have any further queries!
 Cheers,
Prabhansh_______________________________________________Tap that Kudos button if I helped.If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 1 answers
RELEVANCY SCORE 66.8

I installed Windows 7 RC and it does not recognize my nvidia graphics card. No graphics card shows up in device manager. My screen is smaller than the monitor. There is a black border around my desktop. There is one error icon in device manager. It is on a PCI to PCI bridge. I tried installing nvidia drivers but I get a message that there is no card supported by those drivers. Here are some specs of my system.

EVGA nForce 790i SLI FTW motherboard
Nvidea GeForce 9400 GT Video card in PCI slot (only slot in use)

Any help would be greatly appreciated.
TIA,

Si

A:Win 7 does not detect Nvidia card

have you disabled the old graphics card in device manager? (if it is an integrated card) then run your cd driver disc again for the new card.
also unplug your pc and check you seated the card properly.

Read other 19 answers
RELEVANCY SCORE 66.4

Been looking for a good gaming card for 140-160$, these seem to be the 2 contendors, what do you guys think ?
 

A:Graphics Card Poll: Nvidia 6600GT vs. Nvidia 6800LE

Read other 16 answers
RELEVANCY SCORE 66.4

Hello guys,

Today i made a bad thing, i tried to install windows xp 64x , i did it, i download some drivers for it, then i couldn't find Nvidia driver for it, so i format everything , set bios to default,

My next step:
I reinstalled windows xp 64ultimate , I installed drivers from Laptop DVD everything is fine but again same problem, The driver for 620m doesn't works it doesn't detect my graphics driver, even the graphics detector from nvidia site can't detect my driver

So what's wrong, i don't get it have you any idea how i could fix it?

I added my system components on the left so you can check it

A:Dual graphics problem, system doesn't detect my nvidia 620m

i checked internet , i just found a guy who was same problem as me

with same procesor 3110M , but i've found no answer to this problem

I'm thinking if the last driver is bugged or smth, but 1 month ago i updated it proprety with no problems :/

Read other 2 answers
RELEVANCY SCORE 65.6

Hi for the last 4 months ive been trying to fix a problem that ive been having with my computer.
about 4 months ago I did a major pc upgrade where i replaced my motherboard, processor, ram, heat sink, power supply and case, the only things I used from the original computer where 2 HDD's, 1 SDD and my AMD radeon HD 6950 2gb.

Now ive have the most strange issue where i can be watching a video off the HDD or surfing the web on youtube etc and not long after I start the activity my computer will turn off like if I had flicked the switch on the back of the power supply and then it boots back up again and will run fine until i start up an activity again and then it does exactly the same thing and reboots, there is no BSOD shown nor Dumps Created.

Ive tried many things to sort this out and have RMA'ed the power supply and the motherboard (the motherboard wasn't a direct replacement as they didn't sell my original board anymore which was a gigabyte ga-x79-ud5, now i have an asus p9x79 deluxe). I have tried only plugging in one HDD/SSD and then tried a spare HDD when that failed, i have tried one ram stick at a time and still nothing.

now heres where it gets strange whilst trying to rule out differnt hardware i switched my AMD card out for a very old 512mb, pcie 1.0 x16 nvidia graphics and since then my computer has been running marvelously i can have it playing videos for hours, days even(although i havent properly tested for days) and not a single problem at all.

The ... Read more

A:Random restarts with AMD graphics card but not Nvidia graphics card

  
Quote: Originally Posted by cannotdisplay64


so i think ive narrowed it down to a driver error with amd and another driver with my new board, a damaged AMD card, a second dodgy power supply or something else that i haven't thought about or discovered yet.

Has anyone else had a similar problem or have any suggetions as im pretty much all out of ideas at this point and its starting to grind my gears that i cant use my expensive new computer as it should be. Any help is appreciated.

Joe

P.S. sorry about any spelling or punctuation mistakes made but Im very tired at the time of writing this and will be going to bed


The comparison you are making between GPU brands is pointless as a diagnostic. The MAIN difference I can see is that one card requires external power, and the other one does not. A proper diagnostic would be to test another GPU that requires external power.

I've heard that the specific PSU you bought will sometimes not power all the hardware it is supposed so.
People saying it could barely power a SSD, or even an extra fan.

My thoughts. Try using another PSU, try using a similar GPU. Use your old PSU and see if it still happens for starters.

Read other 2 answers
RELEVANCY SCORE 64.8

Hello,

My brother laptop is Dell 5110N and it have 2nd graphic card. (Onboard Intel HD 3000, and Nvidia GF-GT525)

I installed new windows and download lasted update for both graphic card. first install for Intel HD 3000 and then Nvidia GF-525

But now problem is for second graphic nvidia gf525. in device manager it's ok and installed! but when System Rating detect Intel HD. why?

Also i open cpuz programs in menu graphic just see Intel HD and don't see Nvidia GF-525

what's problem?

A:Nvidia Geraphic card don't detect in Dell 5110

I have no personal experience with it, but your N5110 uses NVidia Optimus technology. It uses the Intel graphics much of the time, but is supposed to switch to the NVidia graphics for more demanding purposes.

Optimus Technology

Read other 1 answers
RELEVANCY SCORE 64.8

recently i installed windows 7 on my pc.every thing was grt but i can't install graphics card driver.here are the details:
graphic card: nvidia geforce 9600 gt/1gb/ddr3
motherboard: gigabyte ddr3
processor: intel core to duo 2.93 ghz
operating system:-windows 7

i have tried all the latest versions of drivers.all gives me the same result: "windows cannot detect any hardware that is compatible with the said driver.so setup will exit".

SVGA drivers are automatically installed...m in a great confusion..i was given drivers for XP while purchasing the 9600 gt. it works fine in XP.
waiting for your suggestions and help:

A:windows 7 ultimate can't detect nvidia 9600 gt card

  
Quote: Originally Posted by ctaaraa



recently i installed windows 7 on my pc.every thing was grt but i can't install graphics card driver.here are the details:
graphic card: nvidia geforce 9600 gt/1gb/ddr3
motherboard: gigabyte ddr3
processor: intel core to duo 2.93 ghz
operating system:-windows 7

i have tried all the latest versions of drivers.all gives me the same result: "windows cannot detect any hardware that is compatible with the said driver.so setup will exit".

SVGA drivers are automatically installed...m in a great confusion..i was given drivers for XP while purchasing the 9600 gt. it works fine in XP.
waiting for your suggestions and help:


Have you looked for win 7 drivers for your card? The xp ones wont work unless you install them in compatibility mode.

To do that right click the installer>properties>compatibility>XP

Read other 9 answers
RELEVANCY SCORE 63.2

Hi

I need help here. I cannot detect my Graphics Card in Device Manager.I do anything but not working. This is my report

Read other answers
RELEVANCY SCORE 63.2

Hi!

Yesterday I bought myself a new graphics card: Radeon HD7870.
I've plugged it into my motherboard: MCP73VT-PM but the thing is that I don't receive any signal from it when I connect the vga cable into it, tried with hdmi cable aswell...
Also bought a new PSU 550V to make it match the requirements..

Can it be that the onboard vga graphics collides with the new card? If so... could anyone help me out? I've tried almost everything, spent the whole day trying to get it to work.

My BIOS settings doesnt support editing the onboard stuff.

Thanks in advance
 

A:Won't detect new graphics card

Read other 8 answers
RELEVANCY SCORE 62.4

Hello,

I recently updated the drivers for my video card, NVIDIA's discrete GeForce GT 335M, and afterwards I was unable to get my monitor to display anything. My laptop screen is broken so I use a standalone monitor with VGA cables for my display. So after this I tried the obvious troubleshooting, using my fn key to switch between displays and holding the windows key + P to pick the projector option, both to no avail. I then started windows in safe mode and rolled back the most recent driver update for the video card. Since then my laptop does not detect the video card, like it is gone. I still have the updates installed, NVIDIA Control Panel still exist but says no card is detected.

Also I can not get BIOS to run on boot, possibly because my monitor won't display anything until it gets to the windows home screen.

Any help would be greatly appreciated, thanks,

Shawn

A:Unable to detect graphics card.

Get your Laptop screen fixed first.
You may need to spend less than $100, I guess.

http://www.amazon.com/ALIENWARE-LAPT.../dp/B0049AJ468

Read other 5 answers
RELEVANCY SCORE 62.4

I purchased a new GPU Sapphire Dual X R9 270X 2GB DDR5 OC WITH BOOST
My Graphics Card fan work fine but when I turn on my pc the monitor does not show anything.

I had another graphics card before but needed to replace it so I dont know if this is the trouble.

Anyone can help?

Thanks in advance

A:My Computer Can't detect my new graphics card

Do you have required power connections to it ?
Tried another PCIx slot ?
Monitor connected to the right place ?
Can't be problem because of another GPU for BOOT at least, in the OS later on maybe, if it's different than old one.

Read other 20 answers
RELEVANCY SCORE 62.4

Hello dear community, I've just formatted my notebook again and installed Windows 7 Professional 64-bit. The problem is that system is unable to detect my graphics card - Radeon HD 7600M, which was working fine before. Device manager is showing it as a standard VGA graphics card. My notebook is also using Intel HD graphics 4000 and it's working fine after manually instaling required drivers. When I am trying to install drivers for Radeon, two things are happening: - setup manager returns error message that installation process failed(I've even tried to edit "InstallManager.cfg" file and change "WorkaroundInstall=false" to true, setup manager installed everything(AMD catalyst, etc.), just not the driver - as soon as setup manager is trying to detect my graphics card, blue screen appears and notebook is rebooting It is pretty random which one of the above things will happen. I've tried installing few different drivers and nothing changed. I've also tried(in the device manager) to manually choose the location with the driver - Windows tells me that system knows it's the Radeon HD 7600M device, but cannot install the drivers. During the format, I deleted ALL partitions and created new ones. I remember that there was a small partition(which I left untouched during the earlier notebook format), but this time I deleted it too. Maybe this partition had some important HP data which is causing this problem now? I am also attaching a screenshot of my device... Read more

A:Windows cannot detect my graphics card

Hi: I think that HP has the wrong switchable graphics driver listed on your notebook's support page. See if this W7 AMD/Intel graphics driver works. You must only install the AMD graphics driver, which installs the drivers for both the Intel and AMD GPU's. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58894.exe I don't understand the language shown in your screen shot. Can you translate to English what the other two devices that need drivers are? I'll take a guess and say that the PCI Device needs this driver... This package contains the driver that enables the Realtek Card Reader in supported notebook models that are running a supported operating system. The card reader enables users to read from or write to supported removable storage cards, which are typically used in digital cameras, digital music players, and cellular phones. http://ftp.hp.com/pub/softpaq/sp61501-... Read more

Read other 1 answers
RELEVANCY SCORE 62.4

Hello, and thank you for checking out my post.  My apologies for writing a book, but I'm hoping to give as much detail as needed the first go round. I just received my custom-built T420s (4170-CTO) and have a couple technical questions/concerns about it.  The details of my configuration are located at the bottom of this post. First off, one of the deciding factors of my purchase was the discrete graphics card.  On the T420s I chose NVIDIA NVS 4200M Optimus Graphics 1GB, Intel Core i7-2620M Processor?.  I was thrilled to have more than 256 MB of dedicated graphics memory for my games.  Upon receiving my laptop, though, I ran the Windows Experience Index and saw that the lowest score was the graphics card, which is identified as Intel HD Graphics Family and has 64 MB of dedicated graphics memory.  After my heart started beating again I checked Device Manager and found under Display both Intel HD Graphics Family and NVIDIA NVS 4200M listed as working with up-to-date drivers.  When I configured the laptop online there was no mention of hybrid graphics, so I'm not sure why I have an Intel Graphics card on the machine.  My current laptop that I was looking to replace is a T61p with a NVIDIA Quadro FX 570M graphics card, and only that NVIDIA card is shown under Device Manager and in the Windows Experience / Performance Information.  Thinking that perhaps disabling the Intel card would cause the NVIDIA card to take over, I disa... Read more

A:T420s Nvidia Graphics Card & Express Card Question...

The T420s with Nvidia GPU has two graphics card that can switch on the fly, if you only want the discrete gpu, just go into your bios menu under graphics there is an option to select discrete.With the Nvidia Optimus (which is what you have), it can switch between Nvidia and Intel GPU depending on your application needs. This will allow you to conserve battery or power. Expresscard slot 34 mm slot is occupied by the card reader that you ordered. What you are talking about within the ram slot cover, is the mPCIe slot, which can be occupied by a mSATA drive. http://forum.lenovo.com/t5/T400-T500-and-newer-T-series/T420s-T400s-T410s-removal-of-4-in-1-SD-card-...

Read other 5 answers
RELEVANCY SCORE 62

Hey guys,
This is an important post for me as its regarding my Graphics Card (as i use it a lot). I have a Lenovo G400 laptop with intel i5 3230m , Windows 8.1 and Switchable Graphics(Intel HD 4000 and AMD Radeon HD 8750m). Recently this morning i kept my laptop for an download and went away from it for a while.Later when i returned i saw that my laptop was on lock screen. I unlocked it to see for the download and it said that could not detect hardware or hardware drivers for my AMD Graphics card. Later i saw it could not even detect my intel graphics card. I managed to download and install intel graphics card and it could detect it but when i tried to install amd grahpics drivers it failed.
It cant even detect the AMD Graphics Card.I tried a system restore and it didnt work. According to me it was due to an windows update recently(so i did a system restore).
This is pretty Important for me , so please reply all the suggestions you have
Thanks

A:Windows cannot detect my Graphics Card [IMPORTANT]

Well The Following Error is Solved. All i did was pray to god and shut down the laptop for a few hours after trying every thing and somehow it worked

Read other 1 answers
RELEVANCY SCORE 62

I recently got a VGA-HDMI Cable, so I could link my TV to my computer, but when I went to plug it in, my computer did not detect it. I then tried to force my computer to detect it, as many of the things I saw online recommended this, but this did not work either.
Please help me!
Thanks
J
Also, if its any help, my graphics card is AMD Radeon HD 6400M Series, and as this is a laptop, I cant really get a new graphics card.
 

A:Graphics Card doesn't detect second monitor

Read other 7 answers
RELEVANCY SCORE 62

Hello
I uninstalled my nvidia graphics card via device manager because I was having annoying freezes and nothing I tried fixed it. But when I restarted windows, the graphics cards didn't appear any more and I couldn't install the drivers back. Since it's a laptop I can't just unplug it and plug it in again. How do I get it back?

A:Uninstalled graphics card. Windows cannot detect it now

Do not try to install it through Device Manager.

I just did mine less than an hour ago. So maybe this will help.

After reboot W7 will load but have poor resolution. Go to where the Nvidia driver is downloaded (mine was in the Download folder) double click the Nvidia driver download and follow the prompts to install.

It may show it did not install the driver but don't worry just reboot when it is finished installing or says it didn't install properly.
That is what mine did and after a reboot all was installed properly.

Also after reboot the Monitor will show in Device Manager.

Mike

Read other 9 answers
RELEVANCY SCORE 62

Im not quite sure what the exact spec of my pc are, but here are a few

AMD Atholon 64 x2 dual core processor 4200+ 2.20ghz its a 32 bit operating system, i dont quite know alot about computers so please keep it rather basic, thanks.
 

A:Computer doesnt detect Graphics Card

You need to post the brand and model. That way we can find the model and see if you have slots to install a graphics card.
I'm guessing you have a graphics chip on the motherboard that has died.
 

Read other 1 answers
RELEVANCY SCORE 62

Hi,
(sorry, but this needs a bit of background)

I've been using a custom PC since June, picked the parts, got it put together in a shop. Recently, I've been having occasional BSODs and a message that says "PFN_LIST_CORRUPT". After the latest BSOD and reboot, my PC couldn't detect the GTX560 graphics card (from Palit) in device manager. Under display adapters it shows "Standard VGA Graphics Adapter" instead of the gtx560.

I tried to update the driver with the latest download from Nvidia (version 280.26), but when I try to it informs me "This graphics driver could not find compatible graphics hardware". I've reinstalled windows 7 and the drivers for Ethernet, motherboard, chipset, etc., but I've still got the same problem when trying to install the graphics driver.

When I open the "Properties" window of the "Standard VGA Graphics Adapter" in device manager, under details->hardware ids the following information is shown:
PCI\VEN_10DE&DEV_1209&SUBSYS_00000000&REV_A1
PCI\VEN_10DE&DEV_1209&SUBSYS_00000000
PCI\VEN_10DE&DEV_1209&REV_A1
PCI\VEN_10DE&DEV_1209
PCI\VEN_10DE&DEV_1209&CC_030000
PCI\VEN_10DE&DEV_1209&CC_0300

Any help?

A:[Help] Can't detect graphics card or install drivers

Hello syalam. Welcome to the Forum.

Have you made any changes or added any new hardware to your system around the time this error began to appear?

That VEN is nVidia, but the DEV is a Fast Ethernet Controller.
It could be that Windows has mixed up the registry folder for the device, or the plug and play feature in the video cards firmware could be corrupted, or there is another corruption in the system.

You can try reinstalling the video card clean:
Be sure you have the most current known good driver downloaded.
Create a System Restore Point.

Now go into Windows Explorer and in the C: drive find the nVidia folder (inside will be Drivers > your driver version) and delete it (the whole folder).
Go into Start > Control Panel > Remove a Program and uninstall all programs for the video card. Do PhysX and Stereoscopic 3D first, then the driver. The control panel will uninstall with the driver.

Shut down computer, wait 30 seconds, and then boot the computer.
When it reaches the desktop Windows will find new hardware and will install it's own WDDM1.1 driver. Let it. You will be asked to restart. Do it.
Once back on the desktop you can now install the nVidia driver package for your card.
Try that and see if it works. That PFN_LIST_CORRUPT error can be caused by other bad drivers too, and by bad RAM. But lets check that video card installation first.

Read other 9 answers
RELEVANCY SCORE 62

i have about a 5 yr old compaq running xp.i had bestbuy to put in a radeon 9550 avg graphics card and i had to restore my com now windows wont detect the card so when i try to install the soft ware it says it cant find any hardware to install the software.i could use any help plz and ty.
Edit/Delete Message
 

A:Windows doesn't detect my new graphics card

Double post

Already answered here: http://www.techspot.com/vb/topic112198.html
 

Read other 26 answers
RELEVANCY SCORE 62

First, my specs:

OS: Windows Vista
2.3ghz Intel Celeron
2 gigs of RAM
250gb HDD
GFXCard trying to install: Geforce FX 5200

Alright, so this is a simple question, shouldn't be difficult to answer!
I've read that sometimes you don't have to disable the Onboard Graphics in the BIOS when putting in the gfxcard. So, I stuck it in without disabling in hopes that I didn't have to. Well, the monitor won't turn on, so I just have to pull it back out of the processor. The weird thing is, it won't even turn on if I have the monitor plugged into the onboard gfx slot. It won't until I completely remove the GForce FX. So, I went into the BIOS and saw that the Primary is selected as PCI and not Onboard, even though I use chipset. Could that be why the monitor is getting confused?

But here's my main question, before I get started in all this: if I choose the Primary Video in BIOS as PCI-E, would I still be able to see the monitor once it turns back on? In other words, would I be able to change the bios back if the gfxcard don't work? Will the onboard video work regardless of what's chosen in the BIOS menu?

Would appreciate ANY help! Thanks in advance!

EDIT: oh, and hey does the GeForce FX 5200 support 1440x900 resolution? Could that be the problem it's not detecting it?
 

A:Installing Graphics Card - Monitor won't detect it?

Please post your system specs, To include Make and model System if Big Box, or same info for the following it custom or home built, Mother Board, Processor, Ram, Video Card, Hdd(s), Optical Drive(s), Power Supply Manufacturer Model, Wattage and Amperage on the +12V Rails, OS, and any other peripherals installed on the motherboard.
 

Read other 3 answers
RELEVANCY SCORE 62

Hello, I've been having this problem 2 days ago and it's a bit frustrating. I was just playing some games when it suddenly restarted automatically. My device manager doesn't seem to acknowledge my graphics card anymore for some apparent reason. I've tried plugging my monitor in my graphics card and it just seems like on a standby mode with the blank screen showing nothing. But when I plug my monitor to my motherboard port it shows up fine and is in the device manager. I've tried cleaning my drivers with "Driver Sweeper" then reinstalling the lastest driver for my graphics card, but that didn't do anything. I was hoping if anyone knows what's wrong with my graphics card . Thank you.

Is my graphics card burnt/broken?

EDIT:
Graphics card - Radeon x1900

A:System doesn't detect Graphics Card

OK first of all there are no drivers for Windows 7 supporting you card. Your card is not even supported by Windows Vista as support has been removed, therefore, the reason for the problems you have been experiencing is a driver issue not the card itself. You cannot use 6.5 drivers on you card, the reason why you are getting these blank screens and dropping out of games is because of the drivers.

Not the news you peobably wanted to here but an upgrade is needed the drivers which would have been used would have been Catalyst 9.3.

ATI Catalyst? Display Driver
Version 9.3

9.3 Operating System(s)

Windows Vista - 32-Bit Edition Products Supported

AMD has moved a number of DX9 ATI Radeon? graphics accelerators products to a legacy driver support structure. This change impacts Windows XP, Windows Vista, and Linux distributions. AMD has moved to a legacy software support structure for these graphics accelerator products in an effort to better focus development resources on future products.
The following products have been moved to the legacy software support structure (including Mobile and All-in-Wonder Variants):

ATI Radeon 9500 Series
ATI Radeon 9550 Series
ATI Radeon 9600 Series
ATI Radeon 9700 Series
ATI Radeon 9800 Series
ATI Radeon X300 Series
ATI Radeon X550 Series
ATI Radeon X600 Series
ATI Radeon X700 Series
ATI Radeon X800 Series
ATI Radeon X850 Series
ATI Radeon X1050 Series
ATI Radeon X1300 Series
ATI Radeon X1550 Series
ATI Radeon X1600 Series
ATI Radeon X1650 ... Read more

Read other 9 answers
RELEVANCY SCORE 61.2

So this is a strange issue that I don't think many people will even quite know what to say...
First I should say that I'm not that tech savvy, and I'm not much of the forum person, so if I've put this thread in the wrong place then I'm sorry. I'll try and give you as much information about my specs as possible:

Case: iBuyPower Revolt
Motherboard: AsRock B75M-ITX
Processor: Intel i3-3220 @ 3.30 GHz
Hard Drive: WD Blue 500 GB
Memory: 2 x 4 GB RAM
OS: Windows 8.1
Graphics Card: Geforce GTX 750 Ti
Power Supplies: 350W and 250W
And some DVD drive.

Right, so as you can see, my situation is a little complicated, as I have TWO power supplies. That story's even more complicated, but it doesn't matter so much, all that matters is that those two power supplies are what I have to work with. The 350W supply (which is the supply that I bought later on) is powering everything in my computer EXCEPT the graphics card. Then the 250W power supply (came stock with my computer) is powering the graphics card exclusively. Or at least, that's what's supposed to happen.

So I bought this graphics card about 6 months ago, and realized that I'd need more power for it. So I ordered a more powerful psu. When I realized the 350W psu didn't have the 6-pin pci-e power connector I needed, I realized that I'd have to use the paperclip method to power my graphics card with the 250W power supply instead. I sat the 250W psu outside my rig, powering the graphics card inside my computer ever since. Until about a... Read more

A:Can't detect graphics card and SATA device simultaneously?

SO

After staring at my computer for an hour, and trying multiple random internet chats to no avail, I stared at my UEFI settings for a little bit longer and started messing around with some of the settings.

I found one particular setting that said: "PCIE1 Link Speed," which was set to "Automatic".
Since I didn't know what this meant, I didn't mess with it the first time I saw it; also, I figured since it was set to Automatic, it would automatically choose the best setting for me.
But, this was not the case. Because, as my desperation for high-quality game performance continued, I grew more daring and started changing around different settings to see what (if anything) would happen. So I changed the link speed from "Automatic" to "Gen1". There was also "Gen2" and "Gen3", but by luck of the draw, I chose "Gen1." When I saved and exited UEFI, everything worked beautifully just as it always has for the past 6 months.

I still don't know exactly what this means, or why it changed from the correct setting to "Automatic" but I'm just glad it works now. If anyone may have an explanation for why this works or what this means, I'm all ears, but I am currently able to game again at high quality, and that's all that matters.

Curiously, the other settings, "Gen2" and "Gen3" don't work; they don't even let the computer recognize the onboard graphics, and I had to reset my CMOS.

Thanks to... Read more

Read other 1 answers
RELEVANCY SCORE 61.2

how to check my pcie slot working or not. When i inserted nvidia Gforce 9500gt it is not detecting my mother board (Asus M2N VM HDMI ) but graphics cards fan is working. then how can i identifies the slot is faulty or not. Is their any changes to be done in the bios. Please help me. My processor is AMD Phenom 9550 and 3Gb DDR2 ram is inserted.
 

A:PCI-E slot issue or any changes to be done in BIOS to detect my graphics card

You do need to go into BIOS and disable the onboard video card in order for one plugged into a PCI slot to work. That is most likely your problem.


There are diagnostic cards that you can plug in to test your motherboard such as the one at this site:

http://www.pc-diagnostics.com/pc_diagnostics_tools/flippost_isa_pci_bus.shtml

You also might call nearby computer stores to see if they have the equipment there and will run the diagnostic for you if you bring in your motherboard.
 

Read other 4 answers
RELEVANCY SCORE 61.2

I just installed windows 7 professional last night and when trying to personalize my theme, i realized that i couldn't change window color. It only gave me the contrast themes unlike in vista where i could choose the color and it would still look like vista. I'm not sure if that last sentence made much sense, but i hope you get the idea. I can still use the desktop backgrounds and sounds, but not the aero window colors.

When I go to device manager, the only graphics adaptor it shows is the standard VGA. When I had Vista I didn't have any problem. But now that I have Windows 7, the OS won't detect the graphics card. Is it not compatible with Windows 7? I saw another post with a fix for the 8400M GT, and was wondering if maybe there was hope for me.

Thanks in advance for any advice

A:Windows 7 won't detect GeForce 8400M GS graphics card

Google/goto NVIDIA drivers downloads on Nvidia website, select your graphics card and 32/64 bit. It should give you the latest driver to download. (195.62)

Read other 4 answers
RELEVANCY SCORE 61.2

few days ago i tried to update my nvidia geforce gt 335m driver. but the update would not install, so i thought of deleting the nvidia driver and install the new version. i went to control panel(uninstall a program) and deleted everything with the name nvidia on it(physcs,graphics driver,control panel) now when i tied to install the new driver it said "this graphics driver could not find compatible graphics hardware. so , i went to device manager and the only display adapter there was intel hd graphics. and the intel processor pciexpress root port-0045 was showing "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)" my laptop: alienware m11x r2 details:M11x R2 Specs & Latest News | Alienware | The Verge PLEASE HELP!!!

A:how to make device manager detect my graphics card?

Try using Driver Robot or Driver Pack solution 13 Search on google.

Read other 9 answers
RELEVANCY SCORE 61.2

hi
i have this big problem is that my graphics card as a problem that in almost 2 years it never did this
i never had problems with this computer
but what happend is that i use a LCD screen the resolution is use is 1768x992 and i use a Nvidia GeForce 9800 GT graphics card
what happends is that when i turn the computer on i see the screen with ALOT of lines with weird colors and i thought this was a drivers problem so i installed the graphics card drive and clean the PC up for the 2nd time nothing worked so i tried formating it but i doubt it that would work because those lines where there so yea
i did manage on getting a screen cap from the windows and it looks like this :

http://i954.photobucket.com/albums/a...9418/wtf-4.png
the weird part is that the lines and stuff that appear on the screen as well dont show up on the picture so i tried using another monitor and it had the same result
im using Windows Ultimate 32 bit
i have my graphics card connected to my TV(LCD) with a HDMI cable
i thought it could be that so i tried another cable it didnt work
so at this point i ran out of ideas
so i was wondering if you guys could help me
i really need my pc on my other drive i have stuff from work and i cant lose it for the life of me without counting the school stuff
please help me

A:graphics card doesnt detect monitor correctly

I don't know how this happened to you, but the picture is very typical for a desktop that's set to use only 16 colors.

Nowadays, videocards can render millions of colors with a 24-bit or 32-bit depth, this is called "True Color." Many moons ago, you had to make do with about 65 thousand colors (16-bit depth or "High Color"), and earlier still you only had 16 colors or 256 colors (8-bit depth) available.
Using such limited color palettes resulted in images such as the one you have on your screen now.

You should be able to go into your advanced videocard settings and change the color depth, but it would be extremely unusual for a modern nVidia card to offer only 16/256 colors. Still, can you check and see which color depths are actually available?

Read other 2 answers
RELEVANCY SCORE 60.4

Hey guys, I was hoping someone could help me with a problem my friend and I are having with his new Motherboard.

He's running an Asus M4N68T-M LE V2 and while the rest of the board works fine, it just won't see his graphics card in the PCI-E slot. We've tried various solutions and none have yet to yield any results.

We've tried disabling the onboard graphics through device manager etc. The board also doesn't let you turn off the onboard from BIOS, only allows you to set the priority of the display adapters, which is set to the PCI-E first. It just won't show his card in device manager.

His spec is: Asus M4N68T-M LE V2. AMD Phenom II x4 965 3.4Ghz Black Edition. 4GB (2x2GB) Mushkin 1333Mhz DDR3 Ram. Nvidia Geforce GTS450 GFX Card.

I've also tried using my ATI Radeon 5750HD Card and still shows no detection.

We've been trying this for over a day and we just can't figure it out. Help please

A:Asus M4N68T-M LE V2 won't detect external graphics card in PCI-E Slot

One problem that is common when installing these big video cards into Micro-ATX motherboards is that you may not get the card to fully seat properly because some obstruction is holding it up.

Carefully check the entire card/MB area to see if there is anything that may be propping the card up.
Remove the card and re-seat it looking and listening carefully to hear the rear tang on the video card "click" into place.

Read other 9 answers
RELEVANCY SCORE 60.4

Hello. I'm really new to this thread, and this just happened 18 hours prior to this post. I had to reboot my Windows XP (32 bit) After i downloaded NETFRAME 4.0. When i did, my pc hummed to life, but my monitor (A E19T6W) registered that my GTS 250 1024 MB Card was not reading. I check multipul times, looking at the graphics card as it runs. The fan works like it normaly does, but the display is not working. I am now running on my intergrated motherboard (Asus A8N-LA) Which is a Nvidia GeForce 6150 LE, and i do not know what to do. I tried removing the mobo battery for 5 minutes to reset the board, nothing. Ive tried to reinstall my drivers, That does not work. I Removed NETFRAME 4.0. That dose not even seam to help any. I do not hope it is a bad PCI slot, (had the motherboard for 3 years) but are there any suggestions available? Anything would be nice.

My specs are

System Manufacturer/Model Number: Compaq sr1901wm
OS: Windows XP 32 Bit
CPU: AMD X64 3600+ DUO
Motherboard: Asus A8N-LA
Memory: 1.75GB DDR
Graphics Card: Nvidia GTS 250 1024MB
Sound Card: Soundblaster 24bit
Monitor(s) Displays: Emachine E19T6w
Screen Resolution: 1440x900
Hard Drives: 1st Seagate 80GB
2ndSeagate160GB
PSU: BFG Tech 550 WATT

A:PCI dose not seam to detect my graphics card after NETFRAME 4.0 Update

Anyway you can test your card? I had a 9800gt die after I updated drivers for it and sent it back.

Read other 9 answers
RELEVANCY SCORE 60.4

I sent this laptop in for repair awhile ago and I just noticed that my computer doesn't recognize my dedicated NVIDIA 650m graphics card. It's not avalible in device manager or anything. It's as if it doesn't exist. I've started doing some work where I really need it and I'm stuck with the integrated graphics. I've ensured every drive is up to date, I've tried downloading drivers from NVIDIA's website, and I've tried downloading HP's posted Windows 8 drivers (there's nothing for WIndows 10). Nothing has worked so far.

Read other answers
RELEVANCY SCORE 60.4

Hi,
I have my new PC for a 4 months, everything worked perfect till one morning I turned it on, and the monitor (SAMSUNG) tried to detect the graphic card (ASUS R9 290) without any success and turned to sleep mode. The monitor works without problems with another PC or Laptop. I connected the VGA card to my tv LG, and it works without problems, after when I connected it back to my monitor, it works, but not stable, in the screen resolution properties it doesn't recognize the monitor, it's going in safe mode for any entering to game, installing some program or restarting of the computer. I tried to put my GTX 650 into that slot (there are 2 slots for graphic cards, and I tried both of them) instead of R9 290, and everything works without problems. So I decided to connect my GTX 650 that works perfect to x16 slot, and the R9 290 to x8 slot... connecting the monitor to GTX650, it detect also the R9 290 without any problems, but when I disconnect the monitor from the GTX650 and connect to R9 290, the monitor going to safe mode again. I tried all these connections with many different cables (all the cables are in working condition).
If somebody can help me, I will be grateful
Thanks
 

Read other answers
RELEVANCY SCORE 60.4

Is there anything that I need to do in order to make the switch easy do I have to uninstall drivers before I install the new card or what?

A:Going from ATI to Nvidia graphics card

Yes, I would suggest that you uninstall ATI drivers & Catalyst Control Center(and anything to do with ATI) prior to installing the new card. After that it's an easy switch, install the graphics card, the latest Nvidia drivers, sofware & utilities, and you're good to go.

Read other 3 answers
RELEVANCY SCORE 60.4

Hi,

I read on another forum site that a Nvidia Geforce GT630 with 1GB dedicated memory is better than a Nvidia Geforce GT620 with 2GB dedicated memory. Is this true, surely more memory would be a bigger advantage than the slight speed difference between models?

Thanks,
Tom

A:Better Nvidia Graphics card

Usually higher models would perform better than their predecessors but there can be positives and negatives with both.

For example:
ZOTAC GeForce GT 620 2GB DDR3
Clock rate - 700 MHz
Shader Clock - 1400 MHz
Memory Clock - 1066 MHz
Memory Size - 2GB
Memory Interface - 64-bit
Memory Type - DDR3

ZOTAC GeForce GT 630 1GB DDR3
Core clock - 810 MHz
Shader Clock - 1620 MHz
Memory Clock - 1333 MHz
Memory Size - 1GB
Memory Interface - 128-bit
Memory Type - DDR3

1. 630 has higher Clock speeds
2. 630 has bigger Memory Interface
3. Size of memory won't have much impact unless you're using a high resolution or multiple monitors

Read other 5 answers
RELEVANCY SCORE 60.4

I am planning to get a new graphics card for new games such as Doom 3 and Halflife 2.

I have always had nvidia cards, but I hear that the new ati cards are also great.

Can anyone tell me which card is better and why?

What features does one have that the other doesn't?

I was thinking of either a Radeon 9800 Pro 128Mb, or a GeForceFX 5900TD 128Mb.

Thanks.
 

A:Graphics card. ATI, or Nvidia?

Read other 16 answers
RELEVANCY SCORE 60.4

Hi all, I am looking at buying a new Nvidia Graphics card for my system, running XP and currently have a Nvidia Geforce2 MX/MX 400. anyone have any knowledge of these cards.
Cheers
 

A:What Nvidia Graphics Card

First of all, what graphics slot has your motherboard got, AGP, PCIe or PCI.
 

Read other 3 answers
RELEVANCY SCORE 60.4

Hello,

I'm going to keep this question pretty general (non-spec-oriented) and see if it works, forgive me if I don't provide enough information.

I'm planning to purchase a new laptop and have a choice between a laptop that includes an NVIDIA GeForce GTX 970 card and one that does not include a graphics card. I don't know how to make this decision because I'm clueless about what graphics cards do.

Here is what I will use the laptop for: The most CPU intensive stuff will be Pro Tools 11 and other audio sequencing stuff, Photoshop and Illustrator and other graphics programs, and Camtasia. I have Premier Pro and AfterEffects video processing applications but I don't use them and I think the likelihood that I will become a power user is very low.

I am not a gamer at all.

Based on that, do I need the NVIDIA graphics card?

Again, my apologies if I'm not providing enough background to enable an accurate answer. I'm happy to follow up with more.

Thank you,
Tim

A:Do I need an NVIDIA graphics card?

Hi,
Short and sweet Yes

Read other 1 answers