Over 1 million tech questions and answers.

Norton 360 v4: No "Virus Scan" option available under "Settings/Automatic Tasks"

Q: Norton 360 v4: No "Virus Scan" option available under "Settings/Automatic Tasks"

The "Idle-time Full System Scan" in Norton 360 v4 is bogging down my computer constantly, and there is no option to turn it off in "Automatic Tasks".

I contacted Norton and (after several attempts to find someone at Norton who could understand what I just said above and getting "hung-up" on over Norton chat. Inexcusable!!!) I was able to get a hold of a technician who told me that Norton intentionally removed this option "for security reasons, because they didn't want people turning it off".

The problem is, people will then be forced to turn it off by turning off ALL scheduled tasks (under "Settings/Scheduling/Schedule:Manual Schedule") and that is an even worse security problem than the relatively small one that would be created by turning off idle-time full system scanning.

Once the system has completed a full system scan, all files are on-access scanned anyway, so running a full system scan every 3-4 days is rather silly and extremely annoying--especially, because it will continue to try to run every time the system is idle if you cancel it.

A warning urging the user to not turn off idle-time full system scans without fully understanding the risks, and after explaining the risks, would be VERY preferable. Or at least the option to run the full system scans when the system is idle on a certain day of the month/week! The schedule for idle-time full system scans really needs to be separate from other tasks. In fact, the BEST solution would be the option to change the scheduling options for EACH automatic task INDIVIDUALLY--with the option to change EACH one to "Automatic/Weekly/Monthly/Manual".

By forcing people to turn off ALL automatic tasks in order to control that ONE idle-time virus scan option (ALL or NONE!), Norton has made the security problem they are trying to avoid much worse.

So, in the mean time, does anyone know a registry setting that will turn off "Idle-time full system scans" (un-check the invisible box) without turning off the other automatic tasks??

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Norton 360 v4: No "Virus Scan" option available under "Settings/Automatic Tasks"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 164.4

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 163.2

Hi all
Previously the  "Save Picture"  box would put a web generated title in the box and automatically selected JPEG.  Now the title box reads "untitled" and the only file options offered are "png" & "bmp" 

Please note that a similar post has appeared, but the solution did not match the fault.  I'm seeking to restore the automatic response to save picture, that might have been upset by antivirus clean-up programme.

Thank youin advance for considering my problem

Read other answers
RELEVANCY SCORE 154.4

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

Read other answers
RELEVANCY SCORE 153.2

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.2

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 150

Hi, when I type in my address in I.E./Windows Explorer I can see the folder that I shared on the lan but I also get two extra folders "Printers and Faxes" and "Scheduled Tasks". How do I get rid of them?

Also, is it possible to limit users to download 1 file at a time from me?
 

Read other answers
RELEVANCY SCORE 150

Hello,

In older Windows OS's, I remember you had the "Maintenance Wizard" that let you do a disk cleanup, scandisk, and a defrag all on a regular schedule, and 100% automated (no intervention).

How do I accomplish this in XP-Pro SP2? I tried to put the "dfrg.exe" in the Scheduled Tasks, and it opens it, but it requires user input to actually start defragging (you still have to manually click the "defrag" button, or it won't do anything). Does it involve the Command Prompt?

Thanks

A:Auto Defrag in "Scheduled Tasks" - How to make it "Autorun"?

Microsoft thinks you can do it: Schedule Defrag in XP

Read other 5 answers
RELEVANCY SCORE 148

I am on a Windows 7 Professional SP1 system, running IE 11 (11.0.9600.19230C0, update version 11.0.101 (4483187).


When I have Internet explorer opened in "kiosk mode" on one monitor and I open a hyperlink from the other monitor it will open the link in a new IE window (non-full screen) .    If I do the same test with IE not in "kiosk mode"
the hyper link will open in the open window/tab. 

I have Internet Options -- Tab settings "Open links from other programs in"  set to "the current tab or window".  

Any ideas would be appreciated.
Thanks - Tim Reisner

Read other answers
RELEVANCY SCORE 148

hi,

i have tried a bunch of times tonight to run my "Ad-Aware" and wasn't able to, then i tried both my "HJT" as well as my killbox (just to see if it would load, didn't), and wasn't able to because of some "OLEAUT32.dll". i don't know if i am in the correct forum for help with this or not, but i thought it was worth a shot, if anyone can assist me i'd be grateful.
if i'm in the wrong forum please tip me off to that as well, as well as a hint which one to use, thanx!

i run windows me

i guess i shoulda said it said the OLEAUT32.dll, is out of date and those programs need a newer version
 

A:Solved: Can't run my "Ad-Aware", "HJT" or virus scan

Hi, You need the VB Runtime files to replace the newer OLEAUT32.dll file:

http://www.microsoft.com/downloads/...F9-B5C5-48F4-8EDD-CDF2D29A79D5&displaylang=en
 

Read other 3 answers
RELEVANCY SCORE 148

Hello Guys and Girls,

My wireless internet connections are currently set to a manually configured status, but this means I am having problems connecting to other wireless connections with free (ie unsecured) connections. I have tried going to properties and ticking the "Let Windows configure my wireless network settings", but I get a dialogue box coming up telling me that not all of my changes have been made.

Any ideas? Thank you in advance.

Sukita
 

A:Solved: Changing wireless connection status from "Manually Configured" back to "Automatic"

Why don't we start with the make/model of the wireless router in use, as well as the wireless adapter or laptop brand. Also, what version and patch level of Windows do you use?

If you have XP-SP2, you can set the machine back to installation defaults using the following procedure.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
 

Read other 3 answers
RELEVANCY SCORE 146.4

I am trying to rebuild by search index because my computer won't let me arrange items using the "Arrange By" option... However, when I try and load my indexing options to rebuild the index it will sit there and say "Waiting to receive indexing status". If I click the "Advanced" button it will freeze... I also receive an icon and loading display problem SEE PIC#1. Also when I click on "My Computer" it sometimes will sit there searching and it won't load. SEE PIC#2

I have tried the following:
1. Restarting the "Windows Search" service multiple times at different boots.
2. Deleting the files contained in the folder "C:\Windows\System32\config\TxR\". http://support.microsoft.com/kb/2484025
3. Stopping the "Windows Search" service then I opened up "regedit". I went to "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSearch, SetupCompletedSuccessfully" I changed the value from a 0 to a 1. Then I rebooted my PC. I then went back to the same key and changed it back to a 0 and rebooted my PC again.
4. Turning the "indexing service" on and off from the "Turn Windows Features on or off" menu.
5. Microsoft Fixit Indexing Troubleshooter
6. Sfc /scannow
7. Tried this hotfix http://support.microsoft.com/kb/977380
8. Tried another user account and creating a new user account
9. Tried resetting folder view to "defaults" http://www.sevenforums.com/tutorials/15692-... Read more

A:"My Computer" won't load, Disappearing Icons, & "Arrange By" option won't work. Help?

Read other 13 answers
RELEVANCY SCORE 145.6

Anyone know how to get rid of the tasks pop-out when I hover my mouse over a program that I'm about to select? It drives me nuts because I have to wait for it to pop-out before I click my program (If I'm not fast enough to click it right away).

See the attached picture where I've circled in red the part I want to get rid of.
My googling on this has been futile.

A:How do you get rid of the start menu "tasks" option when hovering?

Welcome to the Seven Forums

Go to the start menu properties and click on the start menu tab then click on the customize button and at the bottom of that window set the Number of recent items to display and Jump Lists to 0 that should remove that arrow.

Jerry

Read other 9 answers
RELEVANCY SCORE 144.8

I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.

A:Power Option for "Turning off display" remains at "15 minutes"

That sounds like my problem - I leave the computer for an hour and it is shut down (I think sleep mode). I just need to hit the power button and it comes on to where it was when I left - but 2 of my USB devices are lost so I have to restart the computer anyway.

I changed all the power settings to NEVER. But his doesn't seem to make any difference......

Read other 0 answers
RELEVANCY SCORE 144.8

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144.4

Hi,

I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?


Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.
Thanks

Read other answers
RELEVANCY SCORE 144

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 144

I added a slave drive to my Windows XP Pro computer, and it appears to work properly.

However, when I open the "Documents and Settings" folder (on the slave drive E:\, which is Windows XP Home Edition -- not XP Pro), I do not see any of my documents, sub-folders, etc. There should be MANY sub-folders (inside the "My Documents" folder which isn't even visible), with hundreds of documents, jpgs, etc. within it.

When that drive is installed as the Primary drive in my other computer, the User "Larry" (which is me) has all Administrative privileges. On the computer that I'm running now (with the slave drive in it), I also have Administrator privileges. I own both computers.

My User Name "Larry" is password-protected when I login to Windows (when the drive is Primary and installed into my main computer (not this computer with XP Pro).

I've tried clicking on all the users; Administrator, Default User, Larry, Guest, etc. (Note: I get an "Access Denied" error when clicking on the Guest "Documents and Settings" folder).

So, the questions are:

1. Why can't I see any files or subdirectories in the "Documents and Settings" folder on the slave drive?

2. There's supposed to be a folder named "My Documents," but I can't find it. Normally, that path is "C:\Documents and Settings\My Documents".
--- Where is that folder? It contains all the files I'm looking for.
... Read more

A:Solved: Slave drive "Access Denied" on "Documents and Settings" Folder

Follow the directions here to take ownership of a file or folder.

http://support.microsoft.com/kb/308421
 

Read other 2 answers
RELEVANCY SCORE 143.6

For some reason, IE9 stopped displaying the "Frequent" and "Tasks" jumplists.

I need help on how to solve this issue. I've already messed around with the %AppData%\Microsoft\Windows\Recent Items folder and cleaned it out too. I've checked my taskbar preferences and that didn't fix it either.

A:IE9 not showing jumplists, "Frequent" and "Tasks"

Start here and then look thru that whole thread:
IE Explorer Quick Launch Icon- No "Frequent" list when right clicked?

Read other 3 answers
RELEVANCY SCORE 143.6

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 143.6

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers
RELEVANCY SCORE 143.2

I've run SuperAntiSpyware, Ad-Aware, SpyBot and Norton which removed some trojan files and registry items but I'm still getting pop-ups ("Security System Warning" and "System Integrity Scan Wizard"). Below is my HiJackThis log. Thanks in advance!
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 5:00:21 PM, on 4/2/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Microsoft SQL Server\MSSQL$VAIO_VEDB\Binn\sqlservr.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\system32\cryptainersrv.exe
C:\WIND... Read more

A:"Sys Integrity Scan Wizard" & "Security System Warning" Pop-ups

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

Read other 1 answers
RELEVANCY SCORE 143.2

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

A:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

Read other 3 answers
RELEVANCY SCORE 143.2

I have to set up a Broadband connection. But Local Area connection icon is missing. Someone told "drivers" could be missing... I installed few. But the problem is as it was.. please guide me in this regards.. Thank you

Screen shots Attached

A:"Local Area Connection" missing in "Change adapter Settings".. Plz hlp

Hi and welcome to the Forum
Is the Broadband connection working OK?
Where are you looking for the icon? Can you post a screenshot of the location where you expect to see the LAN icon?

Read other 9 answers
RELEVANCY SCORE 143.2

i recently contracted a virus that does the above mentioned things. i have hijack this, prevx, and wintasks. i also have just downloaded norton 2007. can anyone help me fix my ailing computer?

josh
 

A:Task manager disabled, no "run" option, no "turn off" option

oh, i am running win xp sp 2, have a dell dimension 2350, and have already deleted viewpoint manager, but i'm still stuck.

josh
 

Read other 2 answers
RELEVANCY SCORE 142.8

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.8

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 142.8

I recently had my computer crash due to a TROJAN virus and at that time I had Windows XP service pack 3 which my computer man installed for me. After being infected I had to completely reinstall EVERY thing on my computer taking my computer back down to Service Pack 1 the only operating disks I had. Now when I do a Disk Clean Up, it doesn't have the option to "Compress Old Files." Can some one please tell me why this option is not there and how I could go about fixing this. Thank you.
 

A:"COMPRESS OLD FILES" not and option in my "Disk Clean Up"

Read other 6 answers
RELEVANCY SCORE 141.6

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

Read other 3 answers
RELEVANCY SCORE 141.2

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 140.8

System - Windows 7 Home Premium - 64 bit
After Mcafee scan shows: 2 "unresolved issues". They are 1. Generic PUP.x!ct 2. Generic PUP.z!ca. Mcafee says under "potentially unwanted programs" that they were "unable to delete" these malware programs. What are they and are they harmful to my system? How do I remove them if necessary? I am a bit of a novice so thanks for the help. THX, SK
 

A:"Generic PUP.z!ca" & "Generic PUP.x!ct" Mcafee - "unable to delete" after scan

Hi there.

Those are most probably false positives. What files are being detected as such?

When something is labeled "Generic" it means that McAfee doesn't know what it is but that it looks like something else it knows about.
 

Read other 3 answers
RELEVANCY SCORE 140.8

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 140.4

We used to have "stereo mix" option that enabled streaming audio recording without having to have the audio playing through the speakers. How do I do that now? What replaces that capability? Who makes my sound card? Why is that not readily available somewhere in Dell land? I can't believe forum searching found pretty much nothing on this.

Read other answers
RELEVANCY SCORE 139.6

Word all messed up at the moment. Tool bars misssing and loads of other small annoying things.

How do I start from scratch with Word again ?
 

A:Getting "Default" or "factory" settings of Word back

Delete all occurances of normal.dot Make sure Word is closed.
 

Read other 2 answers
RELEVANCY SCORE 139.6

So I have my entire hard drive backed up to an image file. I had to format and put a new hard drive in my machine. All is fine and dandy, but when I try to access my user's folder in "documents and settings" on the mounted "image" all I get is "access is denied" - anyone know how to fix this, or get around it?
 

A:Accessing a user's "documents and settings" when it's "protected"

Read other 9 answers
RELEVANCY SCORE 139.6

It seems to keep rolling back to 802.11d after I click okay. If you need more information from me I would be happy to fill you in a bit more there.

Some basic specs:
- 32-bit Service Pack 2
- Acer
- AM5620-E1204A
- Intel Core 2

Any additional help to further assist would be appreciated!

A:Can't change advanced settings from "802.11d" to "wireless mode"

This appears to go along with your other post at http://www.sevenforums.com/network-s...-mode-eee.html

Read other 8 answers
RELEVANCY SCORE 139.6

My notebook is set to the recommended screen resolution, under display settings that allows you to change the text size indepdenent of the screen resolution, I was expecting to see 3 radio buttons (as per the windows 7 tutorial) but I can see only "Small" and "medium". I haven't played around with different screen resolutions to see if it has any effect.

I wonder if it needs some driver update or related to my screen resolution or whatever? Thanks.

A:display settings only shows "Small" & "Medium"

I really don't know, but the Nvidia driver automatically makes some adjustments, depending on what it is installed on. I suspect that they feel no one would want the large text on a small display.

Read other 2 answers
RELEVANCY SCORE 139.2

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

Read other answers
RELEVANCY SCORE 139.2

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

Read other answers
RELEVANCY SCORE 139.2

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 139.2

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

Read other 5 answers
RELEVANCY SCORE 139.2

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

Read other 9 answers
RELEVANCY SCORE 139.2

Hi, my Lenovo laptop has had a virus in it for quite a while and I recently did a factory reset, (I wasn't trying to get rid of the virus, I was just trying to clean out my old files) and it shut off. I turned it back on after I thought the reset had finished and all that came up was a black screen with the words Lenovo and it said "preparing automatic repair", and would go to another screen and say "diagnosing your pc". It would stay in a constant loop. I haven't been able to fix it on my own, any ideas?
 

Read other answers
RELEVANCY SCORE 139.2

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

Read other 6 answers
RELEVANCY SCORE 138.8

Probably like many members of this forum I usually have multiple programs open at one time. I have a couple of chat programs open, probably a word document or two or spreadsheet, Firefox - with usually at least a dozen tabs open and likely a program to edit or render video. I am pretty satisfied with windows 7 but there is one think I want to change. When I get a new message from a chat program, or when a video is finished rendering, or there are new updates for some program, I DON"T want the computer interrupting what I am doing. It is ok if it blinks in the lower bar...but I don't want it commandeering the cursor and sending all of the words that I am typing to the program in control. I have sent some pretty strange - and embarrassing - messages that way. How can I stop it? I don't want a computer to try to think for me

A:Can I turn the automatic "interrupt" option off?

Hi pengyou,

Can you update your profile please, it states you have XP & 98 but you are asking about Windows 7? Thanks.

Could you mention some programs that cause your issue? It sounds more like an application issue than an OS layer issue. For example, some applications will flash on the bar but others will pop to the front.

Read other 6 answers