Over 1 million tech questions and answers.

Pinout label on USB mobo connector

Q: Pinout label on USB mobo connector

I have a connector on my mobo for USB 2.0, It lists 2 pairs of pins like
5V, 7-, 7+, GND and 5V, 8-, 8+, GND

Then it shows a single pin at the end of the connector labeled NC.

One my USB from panel connector I have 2 sockets matching the 2 pair of pins on the mobo USB connector. Then there is a single wire in the same bundle from the fron panel USB socket with the 2 connectors that is labeled GND. Does the single wire from teh front panel socket that is labeled GNDgo on the mobo pin labled NC?

Thanks,
Charles

RELEVANCY SCORE 200
Preferred Solution: Pinout label on USB mobo connector

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Pinout label on USB mobo connector

I believe that the label NC stands for No Connection.

Read other 3 answers
RELEVANCY SCORE 71.2

Hello all, I have a Z420 and am looking to replace the standard PSU which I know uses a proprietary 18-pin ATX power supply header, and I was hoping that I could get help with the pinout of the header so I can make a standard ATX 24-pin to 18-pin adapter given that the pinout for it does not seem to be provided in the support pages for the Z420 (from what I have seen at least).In my search I have found the Z210 pinout for the ATX power connector which is also an 18-pin header, but I do not want to just assume that they share the same pinout and possibly bork my system. I have also found an adapter made just for this purpose from moddiy, however without any pinout information I do not just want to blindly trust them either.Thanks in advance for any and all help.

A:Z420 ATX Power Connector Pinout

Hi,I'm trying to do the same thing. Could you share the information if you have figured out how to do this? Thanks

Read other 1 answers
RELEVANCY SCORE 70.8

I have a ThinkCentre M81. I am currently trying to put the guts of it in a different case, so that I can add some more disk storage to it. I have checked all of the guides I can find on the Lenovo Support site, and they just show the location of the connector, and how to repalce the front panel.  I am trying to connect standard ATX front panel connections to my M81 motherboard, which I am having some trouble with, due to the Lenovo front panel connector just being one big connector. I am just wondering if this information would be in a resource I missed somewhere, or if I have to trace out the wires.













Solved!

Go to Solution.

A:ThinkCentre M81 Front panel connector pinout

It's not your model, but perhaps they are similar:
 
http://forums.lenovo.com/t5/ThinkCentre-A-E-M-S-Series/ThinkCentre-A60-front-panels-power-audio-and-...

Read other 4 answers
RELEVANCY SCORE 70.8

This might be an unusual request, however, I was wondering if anyone knows the pinout of the 40-pin connector for the display on the HP Pavilion dv4-2165dx? This is the connector that connects to the motherboard. I have salvaged the display and want to see if I can convert the connector to HDMI for use as an external monitor. If anyone has done such a conversion before, please let me know how. Thanks!

Read other answers
RELEVANCY SCORE 70

Hi, I have got the Lenovo d367 h81 for a long time, or rather the entire system Lenovo 530 (for nothing, so to speak), today I decided to install a normal case (Deepcool smarter).USB and f_panel (hdd led, power led, reset sw, power sw) work fine, but I just can't connect the audio connectors ... But having the original 14 pin connector. Already found a topic where everything was painted in detail, nothing fits... And especially with a ledge it introduces a gray contact, which is not... Colors are: black (going to the panel), black (as a jumper from the first), white, yellow, green, red, blue, brown and purple. Sorry for english from google '

Read other answers
RELEVANCY SCORE 69.2

Is there any available information about the pinout  of ribbon-cable-connector for Precision M4600 keyboard? it is 10 pin connector, but have no idea what is power, what is ground and what are the signal pins. Is it using USB connection? or else?
I know this keyboard is compatible with other laptops  - Latitude E5520 E5520m E5530 E6520 E6530 E6540 Precision M4600 M4700 M6600 M6700.
I'm trying to fix the keyboard connector.

A:Precision M4600 keyboard ribbon cable connector pinout

That level of detail isn't going to be available -- if the keyboard has failed, it needs to be replaced.

Read other 1 answers
RELEVANCY SCORE 69.2

Hello Forum,
 
i see a 11 pin yellow male usb connector on my m58p board,
i have some m58p and one m90p and i think a m91 or m93p,,
questions:
-have all thinkcentre pcs this 11 pin connector, same on m90 and 91p?
- is there any possibility to connect a newer usb device to that 11 pin connector?
- is there any adapter to usb 2.0 or maybe 3.0?
or can i only connect a normal female usb device like a cardreader with 9 pins to 11 pin connector with not using the two most right pins?
 
thx, bernd
 
thx for informations!
bernd
 
Mod: edited the Subject line to clarify that it's the motherboard USB connector

A:ThinkCentre M58p: motherboard USB connector pinout, card reader

- is there any adapter to usb 2.0 or maybe 3.0?

This, or a similar card?  USB 3.0 PCI-E Express Card with 4 USB 3.0 Ports, Speed Up to 5.0 Gbps
 

Read other 9 answers
RELEVANCY SCORE 69.2

I need to know about the layout of the io pins.

Read other answers
RELEVANCY SCORE 69.2

I'm trying to help my friend's kid put his Inspiron 660s components into a new case (NXT Guardian 921), and need the pinout of the Power Button Connector (LEDH1) on the motherboard. Unfortunately I do not have the old 660s case at the moment to try and trace out the old wires. I have been able to successfully find a set of pins that works for the Power Switch, but cannot figure out which ones are for the HDD LED and the Reset Switch on the NXT case.
I also have a multimeter, but not sure what voltages I should be checking for, or if jumpers are used on the Dell pigtail connector.
Thanks.

Read other answers
RELEVANCY SCORE 67.6

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio & USB) pinout recase (M58, M71e, M73, M91, M92, M93)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 63.6

Can anyone give me the mobo connections for this board?
 

Read other answers
RELEVANCY SCORE 56.4

How does one tell if their mobo has a 20 or 24 pin power connector (short of opening up the case and looking)?

EMachines T3508 Desktop

Intel Celeron D Processor 356 3.33GHz
533 MHz FSB | 512 KB L2 Cache
300 watt PSU
 

A:Mobo And PSU: Connector

You really just need to pop the side of the case off and look, unless you know the brand name and model number of your motherboard and can look it up on the manufacturer's website.
 

Read other 2 answers
RELEVANCY SCORE 56.4

My wife's computer - spec build: MoBo MSI A55M-P33 /N1996 / MS 7786 v.1.0. I found a MoBo description (on internet) which says it has a FDD connection. I think I've looked everywhere but haven't found it. Is it there or not?
Thanks.
 

Read other answers
RELEVANCY SCORE 55.6

Hi!

I have a MSI Z170A Mobo. It comes with an on board RGB connector. I currently have two RGB Fans connected and working properly.

My question is how many more can it handle. I want to expand to 6 fans all RGB connected in series
 

Read other answers
RELEVANCY SCORE 55.6

I bought a Startech hot swap tray for my 5.25 bay and it installed with no problem,but I have a 2pin connector for the LED and I do not know where to plug it in at. Also do I need to plug it in? I have a EVGA 680iLT mobo if that helps. I do not see anything in the mannua.l

A:Plug 2 pin connector on MoBo

Can you provide a picture of the 2pin plug. It would help greatly.

Read other 9 answers
RELEVANCY SCORE 55.6

Im working wth a computer that lost its power supply. Specs are not needed, my question is very general. Helping troubleshoot via telephone.

Bestbuy brand power supply died. Owner replaced it with a Thermaltake PSU. The system shuts off after heavy usage like gaming and stuff.
Visual inspection shows that the 4 pin ATX connector socket on the mobo next to the CPU has some melted plastic inside it, so the new PSU connector doesnt fit snug.
If the connector is held down with tape, it will stay on longer, but eventually shuts off again.

I was wondering if I could clean the plastic off, or just get a 8" 4 pin extension cable, plug the female end into the new PSU, cut off the male end and solder it to the mobo.
I know that I will have to be careful and make sure nothing will short out. Just wondering if that would be a solid fix or not? Thats the only visible damage. Thanks in advance!
 

A:Burnt 4 pin 12v ATX connector on mobo

Only if you are experienced, and very good at soldering.
There should be a way of using that extension cable by slightly compressing the socket... and I do mean slightly, just to make the fit more firm.
If you have access to a womans power sander or file that many women use to repair and polish their nails, you might be able to clean up the posts in a way that would be helpful.
As you are aware, be very careful to avoid putting pressure on those posts because the motherboard is very fragile and any pressure offers the risk of damaging the contact between those posts and the board, and that will be extremely difficult to fix...

Be sure to use very good lighting and perhaps a magnifying glass to be sure it is not already damaged.
 

Read other 5 answers
RELEVANCY SCORE 55.6

hey all im really desperate with this. so i hope this doesnt be in wrong subforum.

well i recently cant get my computer booting. apparently because of the 4-pin mobo connector. im not sure whether its the mobo part loosen, or the power supply itself.

so after playing with the cables and such, my computer working. but its been twice from just now it freezes, (because of loosen 4-pin mobo).

so im confused, and worried, what to do in order to make the computer stable again? must i check the cable jack or....

regards
 

A:Mobo 4-pin connector going nuts

The 4-pin CPU power connector is supposed to snap in and lock... Did the locking lever break off, or is the whole connector loose?
 

Read other 2 answers
RELEVANCY SCORE 55.6

System Specs:
p4 3.0 prescott core
gigabyte socket 478 mobo
radeon 9800 pro (Sapphire)
dual 1gb rosewill mem. (2x512)
Compusa 500 watt power supply

Well let me start from the beginning. A few weeks ago my computer started to shut off while I was playing counterstrike 1.6. I checked my temps and they were well below the threshhold. Maybe about 65 C. So I figured it might have something to do with the graphics card being that i wasnt getting any problems outside of the game. I uninstalled the driver software and it gave me a couple errors. "Zero Display Service" error. I spoke with a friend and they told me to use nasty file remover, while booted in safe mode, to remove all the files. By this time I had cancelled windows "adding new hardware" thing, and clicked on the updated drivers I had downloaded from ATI. During setup i recieved two errors. One was an "INF Error : display driver not found" then "Setup could not complete, try installing thye standard VGA driver before beginning setup." Well the only other thing I could do was install using the disc that came with my card. This too gave me an the "Zero display Error" but it still completed the installation. This did not fix my computer shutting off problem. After cleaning out my computer and checking all the connections, and disconnecting and reconnecting I finally got the driver installation to not give me an error. I'm not sure how I did it, I used the cd, but for so... Read more

A:Melted 4 pin connector (mobo-ps)

Read other 9 answers
RELEVANCY SCORE 55.6

Title says it all pretty much, I'm getting my computer in about 30 or so days and my case has 3 fans on it and my motherboard only has one case fan connector, what can I do besides buying a more expensive motherboard?

Case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811119197

Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813131647

Any help or advice is appreciated, this is my first build so I'm just trying to figure these things out lol.
 

A:3 fans 1 connector on mobo, what do i do?

The fans on that case look to have the 5 pin molex connectors . . you can use them instaead of the 3 pin motherboard connector
 

Read other 1 answers
RELEVANCY SCORE 55.6

Hi, I am tying to sort a PC for a friend. The PSU appears to be fried, so swapped that for a spare one. The spare provides power to the mobo in that the on board LED lights up, AGP powered fan spins up, as does the CPU fan and the case fan. However this is as far as I get, the is no video output. I am wondering if the mobo is fried too. One other thought is that the 20 pin connector on the original PSU contains 20 cables, whereas on newer PSUs there are only 19. Could it be that as the PC was built with a PSU which provided 20 cables into the 20 pin connector that a 20 pin connector fron a newer PSU which only contains 19 cables might not work? Sorry if this is a bit garbled.
 

A:Mobo power connector

partofthechaos said:





Hi, I am tying to sort a PC for a friend. The PSU appears to be fried, so swapped that for a spare one. The spare provides power to the mobo in that the on board LED lights up, AGP powered fan spins up, as does the CPU fan and the case fan. However this is as far as I get, the is no video output. I am wondering if the mobo is fried too. One other thought is that the 20 pin connector on the original PSU contains 20 cables, whereas on newer PSUs there are only 19. Could it be that as the PC was built with a PSU which provided 20 cables into the 20 pin connector that a 20 pin connector fron a newer PSU which only contains 19 cables might not work? Sorry if this is a bit garbled.Click to expand...

what mobo is it? does it have an additional 4 pin power connector? or an additional 8 pin power connector?

The more specs you can provide the better.
 

Read other 2 answers
RELEVANCY SCORE 55.6

I've got a Premio mobo. a 212J, that has an unusual board socket for the power supply.
It's a white plastic socket with the internal pins.(2 banks)
A scan of this board can be seen at:
http://home.earthlink.net/~gothix/premio.html

This is probably a real newbie question but I've never seen a power socket like it.
Thanx in advance.
 

A:mobo power connector???

Read other 6 answers
RELEVANCY SCORE 55.6

Hello everyone! Happy New Year!!

I am trying to replace the standard 300 watt power supply in my HP m7350n computer. It looks like I can handle it, except I am worried about the 24 pin connector that attaches to the motherboard (P5LP-LE). I don't want to break anything, and it doesn't want to release when I press on it and try pulling. I am tempted to use a tiny screwdriver, but that feels like a bad move.

Any hints?

The new 430 watt supply has a 20 plus 4 connector. This just attaches like the 24 pin connector but in two parts (right?)

Thanks, Gordon
 

A:Release 24 pin ATX connector from mobo

Yes just break away the 4 extra pins, using anything you have
 

Read other 2 answers
RELEVANCY SCORE 55.6

Hi guys. I just received a PC a bought online. The motherboard is a "ASUS 1155 P8H61-M". The thing is that I ordered an extra fan apart with the one that comes with the case, and the thing is that this extra fan they gave me has a 3-pin female connector (see first image).
My motherboard only has 1 male 3-pin connector, and its reserved for the cpu fan. It also
has 1 male 4-pin connector but its occupied but the fan that comes with the case...
There is a weird series of 7 pin connectors in which my fan connector would fit, but I'm not sure if those are meant for fans 'cause to those 7-pin connectors my HDMI audio and USB connectors are connected....

My psu has no 3-pin male connectors, just more female 3-pin ones or some weird 4-big pin ones (see second pic).... what should I do?? Is there some kind of attachment I need to buy?

A:can't connect 3-pin fan connector to mobo

sorry not 7-pin connectors.. they have 9 pins

Read other 3 answers
RELEVANCY SCORE 55.2

Okay I've searched up and down the web and can't find anything about this connector.

First off this is a 300-watt Compaq PSU from a Presario 7000 Desktop.

This Compaq computer won't power up. When I installed a standard ATX-12 PSU, the green light on the mobo came on but because most ATX-12 PSU's don't come with this very proprietary connector the computer failed to boot up. The CPU fan didn't even twitch. But the mobo green light AND the PWR LED on the front of the case lit up. Neither lights came on with the original Compaq PSU.

This connector is white and labeled "P8" and is a 6-conductor white plug. The overall size is similar to the power connectors you plug into your hard drive and other IDE devices. It looks like an oversized floppy drive connector. The wiring colors are: Red, Orange, Orange, Black, Black, Black.

I've traced the wires and here's where they go to the PSU's circuit board:

Red - connects to the same red lead on the IDE power connectors
Orange - connects to the same orange leads on the main power (mobo) connector
Black - connects to what looks like the PSU's chassis ground.

It looks pretty straight forward and I could probably modify a standard ATX-12 PSU to a Compaq PSU by snipping off this 6-conductor plug and splicing into a generic PSU's standard wiring.

But before I attempt this, is there anyone out there that knows the pin configuration on a standard/g... Read more

A:Compaq PSU 6-pin connector plugs onto Mobo near IDE

This link may be of some use to you possibly.
http://www.technick.net/public/code/pinouts.php

If not, i have opened up and rewired many psu's.

Rik.
 

Read other 4 answers
RELEVANCY SCORE 55.2

Hi, i have a http://www.fic.com.tw/product/motherboard/INTEL/VG33.aspx and i dont know where the case connector plugs go (power on, h.d.d led, speakers) I dont have any manuals or cd's, just the mobo.
 

A:Need to know where case connector plugs go on new mobo.

Go HERE and download the manual.

Regards Howard
 

Read other 1 answers
RELEVANCY SCORE 55.2

My motherboard is a model Ms-6330 Ver: 2.1 (Microstar) but it also has the gateway part number 2512595. I am currently relocating this motherboard to a brand new case that I just bought and I ran into a problem. The front panel connectors (power switch, led, hdd led, etc) go onto the motherboard in a certain area where there are 15 pins. Unfortunately I have no idea which connectors connect to which pins. Can someone help me? (Maybe someone with the same motherboard/problem). All I need is a way to identify the pins and make sure I don't like accidently fry my motherboard. Thanks a lot! -Andrew C.
 

A:Front Panel Connector on Mobo

Hi,
For starters, have you checked your manual? Also, look on the m/b...in really tiny abbreviated letters you should be able to see where these go (you may see "pw switch"...."HDD ACT"........i know when i was installing my connectors, i got most of them wrong..but dont worry..no frying of the motherboard.....if the connector is in the right place but no light from the LED..try reversing the cable........the easiest cables to place are the pw switch and the reset..as you can test these easily....good luck
 

Read other 3 answers
RELEVANCY SCORE 55.2

I've wanted to know the difference in useing ATX power connector and ATX 12V connector. my mobo and psu both support ATX and ATX 12V. standard atx i kow has been around for awhile. so what the difference?
 

A:Solved: Mobo Power connector

1.2. Key Changes for ATX12V Version 2.0 and later as Compared with ATX and Pervious Versions of ATX12V Power Supply

This section briefly summarizes the major changes made to this document that now defines ATX12V power supply. With the move to 12V voltage regulators for the processor, ATX guidelines for 5V as main power are no longer provided.

1.2.1. Increased +12 VDC output capability
System components that use 12V are continuing to increase in power. In cases where expected current requirements is greater than 18A a second 12 V rail should be made available. ATX12V power supplies should be designed to accommodate these increased +12 VDC currents.

1.2.2. Minimum Efficiency
Minimum measured efficiency is required to be 70% at full and typical (~50%) load and 60% at light (~20%) load. New recommended guidance has been added to provide direction for future requirements.

2.03 is the current version of the ATX Specification as of this writing. Future references to the ATX Specification in this document imply version 2.03 or later, as applicable. ATX12V Power Supply Design Guide 8

1.2.3. Main Power Connector:
The 2 x 10 main power connector has been replaced by a 2 x 12 connector. This was made to support 75 watt PCI Express*requirements. Pinout assignments are based on the SSI recommendation.

With the added 12V, 5V, and 3.3V pins the need for an Aux Power connector is no longer needed and the guidance for this connector has been removed.

1.2.4. Separate current limit for... Read more

Read other 3 answers
RELEVANCY SCORE 55.2

I have a hiper modular psu, and the asus A8N-Sli premium mobo, in the antec p180 case, for anyone who has a similar set up (or has just used that case in fact) has probably noticed getting the 12v 4 pin atx connector from the psu (in bottom left hand corner) to the ATX slot (in my case the top left hand corner), is kindof hard unless you have a rather long cable (espesically as with the case layout you have to slide it through pretty much the middle of the case). Anyway this wasnt really a problem for me until I bought a new sound card and the fact that the cable is tought across all my spare pci slots is suddenly rather annoying, basically I either need to extend the original cable, convert a molex into the 4pin 12v ATx cable, or buy a whole new cable thats a bit longer (as the PSU's modular). Feedback on how to do either of these (or which is best) would be greatly appreciated (even just a website to buy the parts from would be great as I can't find one anywere) as having a soundcard sitting on my desk is rather annoying, to think i could be fragging in surround sound
 

A:4 Pin 12V atx connector to mobo isnt long enough

I'd go with an extenstion since all you need is a little more slack.

Found one at this UK site Maplin.co.uk
I don't know where you're posting from, but there's likely to be a retailer that has a similar item near you.

EDIT: Doh, just noticed they're out of stock.
Lots of extentions here: performance-pcs.com
 

Read other 3 answers
RELEVANCY SCORE 54.4

Hi everyone. Ive just finished plugging my power led, hdd led and pc speaker into my motherboard. The only thing i have to plug in now is the reset switch but i dont know where it goes. Does anyone know where it plugs into? My motherboard is a DCS 370VB.
 

A:Cant find reset switch connector on mobo.

It shows up nowhere in the manual ? Generally it is quite close to the set of pins to which you plug the HDD led, speaker, etc.

ps. searching for your motherboard on Google doesn't yield much results so I can't seem to find a digital manual for it.
 

Read other 1 answers
RELEVANCY SCORE 54.4

does anyone know or have a good reliable psu (550w or so) with a native 24pin mobo connector. im gonna get this dfi lan party mobo and its highly recommended to have a 24pin and not a 20 with an adapter so ive been looking around but all i can find are the adapter ones and really expensive ones. im looking to drop at most $150. much thanks as always.

also needs to be pcie compatible and sli and sata and other goodies

planning on putting in a evga 7800gtx KO if newegg ever gets it back in stock.
 

A:good psu with a native 24pin mobo connector

Newegg list of SLI PSU's
 

Read other 5 answers
RELEVANCY SCORE 54.4

Hi, I researched this board and found two other posts documenting this issue:https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P51s-sata-ribbon-attachment-FAIL-NO-FIX/...https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P51s-sata-HDD-cable-FRU-dislodged/m-p/40... Interestingly enough, this seems to be a problem to at least two other people during the month of March 2018. I have this same problem. My p51s just all of a sudden stopped detecting the storage drive. I opened the case to find that the SATA connector wasn't even connected to the motherboard. The connector that should hold the sata cable is just completely detached. And the piece that was within that connector is out of place as well. Please reference this photo (NOT MY PHOTO -- not taken by me, credit:https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Upgrade-ThinkPad-T570-from-SATA-HDD-to-M...):  This person's laptop seems to have a strong solder, which I don't believe mine did. Please advise how I can get this repaired, get a new computer, or just give me my money back. I've used Lenovo for ~10 years and have never had problems like this. I need this computer to work.

A:p51s sata mobo connector is broken

+ picture of connector parts, detached

Read other 2 answers
RELEVANCY SCORE 54

I'm having a problem with the Karajan audio connector on my new DFI NF4 Ultra D mobo.

I just finished putting together my new PC last night, and I've got Windows loaded and all of that good stuff.

But I'm having some audio problems.

My computer is not even recognizing any sort of audio output device.

The motherboard on-board sound piece is actually a separate piece that you connect to the board.

I have it connected well. I went back and made sure it was on good, and I installed the drivers and such, but I still can't seem to figure out what the problem is.

Karajan makes the audio piece, and I did a bit of Googling and I came across a guy on some other forum who was having the same problem, but he never mentioned how or even if he got it working.

Does anybody have any suggestions?
 

A:I'm having a problem with the Karajan audio connector on my new DFI NF4 Ulta D mobo.

From here - http://www.nvnews.net/vbulletin/showthread.php?t=67098

"I had a similar problem (no sound output) and the way I fixed it was that I had the front case jumpers connected incorrectly and when I connected them correctly, it fixed the problem."

"I pulled them all off and swapped the front output from Line_Output_Front on the Karajan module to Line_Output and now everything works"
 

Read other 3 answers
RELEVANCY SCORE 49.2

Hi.
Just bought on of these Dymo Label Manager PnP Label printer
Dymo S0915390 Label Manager PnP Plug and Play Label Maker: Amazon.co.uk: Office Products
It states plug and play.When I connected it to my windows 10 upon opening the auto run I get a box on screen stating.....
Error Configuration Manager error 13.Source Grand Parent filter..
looked through google and found some info..
How To Fix Dymo Configuration Manager Error 13 (Solved).
Had a go at that but when it completed the scan it wanted money, Also looked on the dymo website for some info on some software for it.Failed.
Any help Please.

Read other answers
RELEVANCY SCORE 45.6

Hello, not sure if this is the correct area to ask, but I've noticed that my E drive's label is stuck as "OS Install" when there is no label assigned. I thought at first there was a label assigned to it and followed renaming labels option 3 on the forums (as a DVD drive was assigned to the letter). But when I assigned a USB drive to the E drive after switching out the dvd drive's letter, I noticed that it keeps the "OS Install" as default label instead of the normal "removable disk" when no label is assigned. This held true with the internal hard drive's partition as well. However when I assigned a drive label such as "CRUZER", it would change to the assigned label. As I like to have my E drive be the dvd drive, I don't want to see this weird label on it when I didn't assign it. If anyone knows a solution or can help me to try to find one, it would be great! I've attached pictures to explain better

A:drive label stuck as "OS Install" when no label is assigned

Please use this tutorial by Golden to post a screen shot of Disk Management.

Leave all the clutter off of the pick. Just post exactly as the tutorial instructs.
This will allow other members to see the need basic information.

Disk Management - Post a Screen Capture Image

Read other 9 answers
RELEVANCY SCORE 42.8

Hi. I am new to building computers and have a question on fans. My case has three fans. Two of my fans have both pin connectors and molex connector attached together. How do I power the fans ?- do I need both connections?
thanks
 

A:Fans with molex connector and pin connector

The 3pin connectors are to plug directly in to the motherboard......if your motherboard does not have the 3pin connectors then plug the molex into the power supply
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi there. Please view this item
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127063

I am confused whether or not the antenna or cable will screw onto my wireless adapter card.

My wireless Adapter card has a SMA connector on it with the screw wedges on the outside rather than inside with a pin in the middle.

Heres a photo of a similar SMA connector - http://content.answers.com/main/content/wp/en-commons/thumb/9/90/200px-Gniazdo_RPSMA.jpg

The brand of the network adapter is the same as the brand of the antenna they are both D Link so youd think they would fit.
will the antenna or cable screw onto that?

thanks, jordan
 

Read other answers
RELEVANCY SCORE 42.8

I have been trying to format and make bootable a 4GB flash drive to use to flash my bios but everytime I try to format the drive it tells me that I have a bad volume name. Can anyone please explain what is a volume name and how to apply the correct volume name to a device being formatted?
 

A:What is volume label and how to find the correct volume label?

Are you trying to Format the drive to FAT32?
What Brand of drive Lenovo or was it a pass out type?
While you're planning uses for the pen drive try Ubuntu 9.01 flash drive Bootable O/S
 

Read other 5 answers
RELEVANCY SCORE 41.6

Take a look at the attached Pinout diagram of the EXT connector on a SB Live! Value soundcard. The top left PIN is PIN 1, but which way do the rest of the pins go? Down or across?
By down, I mean:
1 7
2 8
3 9
4 10
5 11
6 12

By across, I mean:
1 2
3 4
5 6
7 8
9 10
11 12
Thanks.
 

A:Pinout on SB Live! Value

Read other 6 answers
RELEVANCY SCORE 41.6

Does anyone know of any websites that have a good range of pinout diagrams?
I am mainly looking for PS2 and USB, but it would be handy to know if others were available as well.

Thanks
Grenge
 

A:Pinout diagrams

Did'nt find any for more common cables like USB but I did find one forInternal Cables
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hello,
does anybody know the connections to build myself a DVI-D to VGA adapter ?
I need to connect a "new" video card with a DVI-D output to an "old" CRT monitor with a VGA cable, and i don't want to buy a commercial item.

Thanks
 

A:DVI-D -> VGA adapter pinout

They cost like $6 bucks! You must have alot of time on your hands.
 

Read other 5 answers
RELEVANCY SCORE 40.8

I just put a system together with a Compaq Presario 5000T motherboard (motherboard model 686C3 with P-III 933) and am having trouble getting the front case USB ports to work. The header on the board looks like a standard 9 pin header but no matter how I connect to port cables I get a "unrecognized USB device" message in Win XP. I've measured voltages on the pins and get 5 volts on the first and third pins instead of the standard first and fourth. I've rewired the connector on the cable to the front panel accordingly but no luck. Seems like no matter how I arrange the wires into the header I get the same message when I plug my thumb drive in. The thumb drive reads fine when plugged into the rear USB connectors on the board.

I know it's usually a waste of time trying to make use of old Compaq parts, but other than this problem the board actually hooked up and runs great in a new mini ATX case. If I can get this little annoyance figured out I'll have a pretty decent little machine for cheap.

Any help would be great. Thanks
 

A:USB Pinout on Compaq Motherboard

Welcome to TSG Forums

Well if it says "Unrecognized USB Device" then its plugged in right because otherwise XP wouldn't even see it.

If you haven't installed SP2, do so, that usually solves any USB related problems. Worked for me.
 

Read other 2 answers
RELEVANCY SCORE 40.8

I have this pinout:

9-pin Female 9-pin Male
3 Yellow 2
2 White 3
6,7,8 Solder together ----
5 AC ADapter gnd (-)green and orange Green pin 1 Orange pin 8
red to Ac adapter (+) 5
4 Blue 4

Now, I understand how to do most of this, but the part that throws me are the pins 6,7,8 being soldered together...I'm assuming any other color than the ones I'm using for the other pins...but soldered together, where? The actual wires?

Also, I'm wondering if I can do this using an RJ-45/Dsub9 adaptor and some CAT5e....but how would I achieve the above pinout using this method?

Thanks in advance!
 

A:Dsub9 Special Pinout

Read other 7 answers
RELEVANCY SCORE 40.8

I need the pinout for the 708231-5C1 webcami am trying to wire it to a external usb cord

Read other answers
RELEVANCY SCORE 40.8

Hi, I need RS232 pinout of HP RP2 Retail System  2030 . How can i found it ? { RJ-50 Serial Ports (Power Configurable 5V/12V) } Could you please help me ? Best Regards, N A

Read other answers
RELEVANCY SCORE 40.8

hi everyone i am new to the forum. i am here because of the following problem i need to repair an old lansing atp3 but i cant identify the pins the cable is missing. does anyone have a diagram or can create one and send me. i would be very great full thanks.
 

Read other answers
RELEVANCY SCORE 40.8

A friend's newer laptop comes only with a USB port, no longer does it have a parallel printer output port. I loaned him an older parallel port laser printer and he was unable to use it.
I know you can buy them, but I would like to make my own USB to (Centronics)Parallel Printer adapter cable - I am looking for the necessary pinout - Can anyone help me?
 

A:USB to Parallel Printer pinout

Read other 6 answers