Over 1 million tech questions and answers.

BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

Q: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

Dear experts,

after just too many days of troubleshooting (please disregard the former thread) I decided to flash the BIOS, then re-format my SSD and re-install Windows 7 including all drivers the device manager asked for. Apart from BlueScreenView, SF Diagnostic Tool, 7zip and Dropbox, I installed/ran no other software or drivers. Windows update shows me that Windows is updated. I have currently only one bar of 8GB RAM installed; I have a 4-bar 16GB and a 2-bar 16GB kit available that ran fine in an identical PC. The QVL from Asus is from 2011 and outdated; the recommended RAM is no longer commercially available.

Do I need a new processor, mainboard or RAM? A new PC? I sincerely hope not the latter!

I have attached the output from the SF Diagnostic Tool as required. What should I proceed with?

Thanks in advance for any insights!

Preferred Solution: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD 0x0000000a 0x0000001e 0x00000050 0x0000003b

I downloaded and installed one additional software, IntelProcessorDiagnosticTool and ran it. Result: Another old chap reared its ugly head - the BSOD 0x00000124 where the BSOD display freezes and thus no minidump is being written - I have to push the reset-button each time this particular BSOD occurs.

I mean, being a useless user, I can't tell shit from shinola as far as PCs are concerned, but does this indicate a hardware fault? Such as mainboard, memory or processor?

How can I pinpoint what it is, so at least I know what, in the worst case, I have to buy anew?

Read other 9 answers

My computer has crashed for some time now and the things I have been doing so far is
Swap out my GTX 660 for my old GTX 460. No improvements.
Swap out my ram memory with a friend 8GB.No improvements.
Installed a clean version of Windows 10. It still crashes.
Been using Verifier and it has crashed about 5 times from going from login into desktop, in system logs and Minecraft.
No mini dump file has been created with Verifier on.
The last crash as I do got a mini dump from was like 4-5 minutes into a new Minecraft world.
Thanks in advance

Read other answers

I had more bsd, but I think the 0x3b and 0xd1 are fixed. Any help would be appreciated. This is so frustrating. If its hardware related, I need help figuring out what. All my parts are new from newegg except for gpu and processor. I don't think its my ram because I swapped out different ram from my old pc and got same errors and that ram works flawless in other pc. Ran sfc scan now and chk disk and no errors. I am uploading the files you requested posted in instructions.

A:multiple bsod by ntoskrnl.exe, 0x0000000a, 0x0000001e, 0x00000050

The last 4 .dmp files point to a possible RAM problem. The only way to check that is to run a minimum of 8 consecutive passes of Memtest86+ as described here:

RAM - Test with Memtest86+

It is not sufficient to install the RAM into a different system as a test.

Read other 9 answers

While the system is at idle or just light use I get the BSOD. It happens once a day and there seems to be no trigger. Core temps are at normal and run about 40 Celsius. I have tried updating most of my drivers through the device manager and will run a memtest soon. Any and all help is much appreciated, thank you!

Is Windows 7 . . .
- x64
- the original installed OS on the system? windows 7
- an OEM or full retail version? full retail

- What is the age of system (hardware)? 1.5 yrs
- What is the age of OS installation (have you re-installed the OS?) 1.5 yrs. have not reinstalled OS

System Specs
CPU: AMD Phenom(tm) II X4 920 Processor
Motherboard: ASUSTeK Computer INC. M4A785-M
BIOS: BIOS Date: 04/14/10 17"53:51 Ver: 09.06
Total Memory: 4.00 GB
Usable: 3.75 GB
HDD: (1) ST31000520AS ATA Device (2) Seagate Portable USB Device
Sound Card: (1) ATI High Definition Audio Device (2) High Definition Audio Device (3) C-Media PCI Audio Device
Graphics Card: ATI Radeon HD 4200
OS: Microsoft Windows 7 Home Premium 64-bit 7600 Multiprocessor Free

A:BSOD at random, errors 0x0000001e, 0x00000024, 0x0000003b, 0x00000050

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

Read other 9 answers

Having a bsod problem, and there is no error message on one, while the other says KMODE_EXCEPTION_NOT_HANDLED. I checked them in windows debugger and couldn't find anything. I've already did a hard drive scan. Can someone please help me pinpoint the problem? Thanks in advanced.

A:BSOD help: 0X0000000A and 0X0000001E


Before proceeding please provide the following information:

1. Download and save this tool to your desktop:
2. Run the tool, and then click 'Copy' - ignore any errors if they appear
3. Use CTRL+V to paste the unedited results of the tool here in your next reply



Read other 3 answers

Hello, I am getting bluescreens. I was cleaning computer and after plugging computer I got bleuscreen after 5mins of running ~ I didnt check which error it was . I decided to try reinstall everything so I installed Windows again. I did it, installed drivers and after playing game I got error 0x00000050. I contacted ASUS support and they told me to reinstall Graphic Drivers. I did and it was working for 2 days. Today I got BSOD with error 0x0000003b.

A:BSOD: 0x00000050 ,0x0000003b

Hello aaskY,

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information if able. One of our BSOD experts should be by later when able to further help.

Read other 9 answers

Hi, I recently upgraded my pc and I have some probleme with the new one.
I got the first BSOD on 18th of december: 0x0000000a

After this, I updated the VGA driver (from AMD's page) and I did not have a problem for 3 days.
Today I got this: 0x0000003b
I have the latest drivers and updates installed. (W7 Ultimate x64 installed on 5th of dec.)
What else can I do?

A:BSOD random 0x0000000a, 0x0000003b


Please post all files following:

Read other 9 answers

I started to get BSOD?s about a month ago from time to time. I don?t know what to do.

I have checked my hard disk and memory for errors. Nothing found. BSOD?s come while I?m doing nothing: Computer is on and firefox is maybe open but I am not using computer. Does anybody know what should I do?
Thanks for your help.

A:BSOD while doing nothing, error 0x0000003b/0x0000000a

Hello, vejolkk and welcome to the forums. I will try to help you with this. This is what one dump file said, the other one gave little info.

BugCheck 3B, {c0000005, fffff80002e518e3, fffff88008d9ad50, 0}
Probably caused by : memory_corruption ( nt!MmCleanProcessAddressSpace+f7 )
Followup: MachineOwner
Please Run Memtest86+

Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip

Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are ... Read more

Read other 5 answers

Hi Guys,

Recently I've got these two BSOD errors on my brothers computer. They've both only happened once but from past experience I've discovered that if you get a BSOD once your probably gonna keep getting it until you resolve it. The computer's not overclocked and I haven't installed any new drivers recently and I've had this computer for about 2 years with no problems before about a month ago. This is my brother's computer so the specs listed in my profile are not for this computer. I'll post the specs for this PC below.

The two files it says are responsible are win32k.sys and nvBridge.kmd. By the second one, I'm guessing it might have something to do with the graphics card but I''m not sure. I've attached the dump files for you guys to have a look at. I would really appreciate if one of the tech savy guys here could help me with this issue. Thanks

PC Specs:

Windows 7 Professional x64
Asus Rampage III Extreme
Intel Core i7 950 3.07Ghz
3x2GB 1600Mhz Corsair Ram
2 x Nvidia GeForce GTS 450
Seasonic 850w Power Supply

A:BSOD Errors 0x00000050 & 0x0000003b

Can someone please help me with this problem.

Read other 1 answers

Hello, been having random BSOD several times a day. The most common error codes are 0x0000003b and 0x00000050. I have attached a zip folder with 3 dump files. Anyone know what might be the cause for these BSOD?

A:Random BSOD (0x0000003b and 0x00000050)

Hi Orange1227,
Can't see no zip here

Read other 1 answers


I had recently installed a new HDD, CPU + heat sink and graphic card on my computer and since I experience multiple BSODs while playing games or doing CPU stress tests. The BSODs error code are generally related to IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA (here a link to my most recent minidump files: https://www.dropbox.com/sh/kttars4un...-Djc8E7Aa?dl=0). It happens every 5 minutes or after one or two days.
I noticed that if I unplug the PSU for about 5 minutes and re-plug it the problem seems to disappear for several hours and then come back (which seems very strange to me).
The problem doesn't seems to be heat related because my cpu temperatures stays bellow 70C while stress testing which I think is normal for my processor.
The problem seems to be related to the PSU or to a faulty driver.

- Alienware Aurora R1
- MOBO: Intel X58 MicroATX LGA1366
- OS: Windows 7 64bit
- RAM: 12GB (3x4gb) DDR3 1333Mhz
- GPU: 1.5 GB asus Dcuii GTX 580
- CPU: i7 920 OC @2.66 Ghz 1.1v (40C idle, 72C Max)
- HEATSINK: cooler master hyper vortex plus
- PSU: Alienware stock PSU (875W)
- HDD: Seagate Barracuda 1TB 7200RPM (ST1000DM003)

Here's a list of the steps I went through since my problem begin:
- Clean re-installing windows 7 OS
- Clean installation of the most recent nvidia drivers (347.52)
- 7 passes of memtest on each of my memory sticks (no errors)
- Prime95 and OCC stress test (I quickly get BSODs BUT if I unplug and re-plug the PSU the... Read more

A:BSOD while computer is under load 0x0000000a & 0x00000050

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 9 answers

Hello. I've been getting blue screens recently when playing games. Ntoskrnl.exe has been in all of the crash dumps and the bug check codes have been either 0x0000000a and 0x000000050. Win32k.sys has also appeared in the crash dumps. This hasn't happened during every game but it happens constantly when playing DotA 2. I've uploaded the crash dumps and other information I got from the SF Diag Tool.

A:BSOD 0x00000050 and 0x0000000a when playing games

Problem Devices:
AODDriver4.01 ROOT\LEGACY_AODDRIVER4.01\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Use the following sites to help with the AODDriver4.1 issue. Rage3D Discussion Area - View Single Post - The AODDriver4.1 service failed .... Cat 12.2 megaproblems

Device Manager : Hidden Devices may help supplement the steps in that link.
Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.
Problematic Software:
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public
Spybot Search and Destroy is not the best malware/spyware utility. Take a look at Good and Free system security combination. for better options.
Crashes point primarily to your graphics card drivers or to your memory. I suspect memory since many have problems getting the correct compatible memory for AMD Phenom II processors.If you are overclocking any hardware, please stop.

Run the boot... Read more

Read other 8 answers

Been having random BSOD for the past week or so. Started on Sunday (11-27-11), where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday morning to see if my memory was bad. After 2 full passes (I know, not a full 8), it didn't seem to be that, so I went ahead and did a System Restore from a backup from roughly 2 weeks prior. This led to solid performance for the next week, until this morning (Monday, 12-5-11) when I had another. All BSOD events seemed to occur at random times, so I can't say they were triggered by a specific event to the best of my knowledge.

I had performed the BSOD dump collection and Performance Monitor Report on last monday as well as doing the BSOD dump collection today. Regretfully, I cannot get the Performance Monitor to stop running today, so hopefully just the dump collection will be enough.

As for my computer components:
- HP Elite 7000 MT machine
- Windows 7 Ultimate x64
- Not the version originally installed on system
- Hardware is a little over a year and a half old
- 64-bit OS (originally had x86) was installed 13 months ago.
- Only non-stock hardware would be an added harddrive (just a backup drive, no OS on it), and I added 4GB more RAM (alongside the original 4GB) back in January.

Any other information needed, please inform me.

A:Random BSOD - error 0x0000000a and 0x00000050

Several issues

1-I do notice Symantec which is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST YOURS IS FROM 2009.

Microsoft Security Essentials - Free Antivirus for Windows

2-Old drivers (as far back as 2005)

MarvinBus64.sys 9/23/2005 4:17:03 PM fffff880`0853c000 fffff880`08580000 0x00044000 0x433470cf
scmndisp.sys 1/17/2007 2:48:03 AM fffff880`018ee000 fffff880`018f8000 0x0000a000 0x45add4b3
lvpopf64.sys 5/11/2007 6:56:21 PM fffff880`09675000 fffff880`097bfd00 0x0014ad00 0x464502a5
lvuvc64.sys 5/11/2007 6:59:12 PM fffff880`09277000 fffff880`095e7500 0x00370500 0x46450350
LVUSBS64.sys 5/11/2007 7:01:20 PM fffff880`0918a000 fffff880`09194900 0x0000a900 0x464503d0
SYMEVENT64x86.SYS 1/14/2008 6:32:19 PM fffff880`014b5000 fffff880`014eb000 0x00036000 0x478bf103
SRTSP64.SYS 2/23/2009 10:18:16 PM fffff880`01000000 fffff880`01073000 0x00073000 0x49a366f8
SRTSPX64.SYS 2/23/2009 10:20:53 PM fffff880`019eb000 fffff880`019ff000 0x00014000 0x49a36795
Rt64win7.sys 2/26/2009 4:04:13 AM fffff880`06e00000 ... Read more

Read other 1 answers

Problem description
My problem is as follows:

When the computer has been turned off for at least a few hours, I'm getting BSOD's while booting but it is rarely.
When cold booting (computer has been turned off for at least several hours), I get a BSOD just after the Windows 7 `Starting Windows` logo screen.
The BSOD message differs:PAGE_FAULT_IN_NON_PAGED_AREA, and sometimes IRQL_NOT_LESS_OR_EQUAL.
The computer boots, but gives a BSOD after a few secs on the desktop.
The computer boots, but when you left it doing nothing for 5-10 mins then it will crash in random times.
After a succesful boot, Windows runs perfectly, including games (e.g. NFS The Run etc @ max most heavy games runs perfectly).

I have reinstalled Windows a few times, and I tried different Catalyst drivers (12.2, 12.3 and 12.4), and various (including latest) motherboard BIOSes.
Tested memory with memtest usually 9passes per stick, replaced PSU, tried scanning hdd for errors/ installing OS to another HDD`s - still no solution.
Tried sfc /scannow -no error found/ diver verifier - didn't crash when activated.

Attachment 219749
Attachment 219750

A:BSOD on start up, error 0x0000000a , 0x00000050

Read other 4 answers

I have an issue where my laptop crashes at varying times, but like at least once per half hour and sometimes a startup for 6 or 8 starts in a row. The BSOD usually says IRQL_NOT_LESS_OR_EQUAL, but sometimes is missing any explanation in that place on the screen The STOP codes are either 0x0000001E or 0x0000000a and there are various parameters following usually including 0x0000000000000000 and ox0000000000000001 or 2 or Z .

My operating system is Windows 7 Home Premium,

I have run malware bytes and a couple other similar tools, disabled and tried to uninstall macafee programs, and I've run windows memory diagnostic tool (extended) at 10 passes, with no irregularities found.

I have run both the debug tol and the diagnostic tool and uploaded results from both.

Please help!
Thank you...

A:BSOD with STOP codes either 0x0000001E or 0x0000000a

Auslogics BoostSpeed BoostSpeed "c:\program files (x86)\auslogics\boostspeed\boostspeed.exe" -usetray helen-HP\helen Startup
Auslogics Browser Care Browser Care "c:\program files (x86)\auslogics\browser care\browsercare.exe" -usetray helen-HP\helen Startup
Uninstall these 2 applications from Control Panel


fffff880`0a0b70d8 fffff880`01060106Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
Uninstall all Intel Rapid Storage Technology applications from Control Panel and reboot the system

Now you need to completely update Windows 7.

Host Name: HELEN-HP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7600 N/A Build 7600

Read other 6 answers

Hey guys, i'm new to this site and with the constant BSOD'S i've been having, i've finally joined the forums after hrs of reading different forums with no actual resolves..hopefully i can get some help from you guys to solve this issue.

first i'd like to give a little history of how this all happened. It started about 2-3 months ago but then it wasn't as bad, then within that 3rd month after countless crashes my comp completely just died on me..and after a few diagnostics i found out it was a bad RAM..after taking out that RAM i did a clean install(wiped everything and and re installed windows 7). For about two three weeks in the comp was fine until just recently the comp began crashing constantly with the BSOD..now i've read about a dozen if not more forums and i'm bout to lose my sanity with this comp. so if i can get some help i would gladly appreciate it.

here's the spec for my comp. By the way I've had this comp for about 3 years(self built) and with no issues until recently.


AMD Phenom(tm) II X6 1090T Processor
Gigabyte Technology Co., Ltd. GA-880GA-UD3H
Award Modular BIOS v6.00PG
total memory 12.00 GB
usable 12.00 GB
HDD -(1) ST31000524AS ATA Device (2) WDC WD10EALX-009BA0 ATA Device
Realtek High Definition Audio
NVIDIA Quadro FX 380
Microsoft Windows 7 Home Premium 64-bit 7600 Multiprocessor Free

Crash list: using Bluescreenview (SF Diagnostic tool isn't working for me)

111613-20794-01.dmp 11/16/2013 4:47:53 PM KMODE_EXCEPTION_NOT_HAND... Read more

A:Constant BSOD, codes 0x0000001e, 0x0000000a

BUMP. can anyone chime on this??

Read other 9 answers

I've had BSODS since last year. The laptop has been for three RMA's with PC Specialist, in the last one they said they did a full rebuild of the system. The BIOS has been updated, RAM replaced, I've done clean reinstalls of Windows in the past.

I had it back for 10 days and then yesterday it crashed again twice. I didn't fiddle with the drivers they had installed, just set Windows to install what it considered essential. I'm using Windows defender - installed the following programs - Premiere Pro, After Effects, VLC, Chrome, Open Office. To elaborate on the issue there is no trigger to the BSODs, they are pretty random, can occur when just browsing online for example. I sometimes go up to around 10 days without issue. The system is also otherwise stable and fast although I annoyingly can't do a system restore because of this error: - "an unspecified error occurred during system restore (0x80070005)". I've been told the most likely fix for this is to turn off antivirus but the problem persists even with Windows Defender turned off.

Can anyone find something abnormal in the dump files and help solve a problem that has been going on for half a year?

Specs are as follows -

It's a Vortex IV laptop with PC Specialist, Windows 8.1, CPU I7-4800MQ, 32GB RAM, Intel HD Graphics 4600, NVidia GTX 770m

Thanks for any help you can give.

A:Persistent BSOD problems - 0x00000050 & 0x0000003B

Only 16 Windows Updates installed. Most systems have 60 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Why is Secure Boot turned off?

Please uninstall Western Digital software. wdcsam64.sys (dating from 2008) is known to cause BSOD's in some Windows systems.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

The following is for informational purposes only.

**************************Sat May 10 20:51:11.988 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\051114-26656-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17041.amd64fre.winblue_gdr.140305-1710
System Uptime:0 days 4:12:35.747
Probably caused by :ntkrnlmp.exe ( nt!PoIdle+166 )
BugCheck 50, {ffffe001350b11fb, 1, fffff801434ce076, 2}
Arg1: ffffe001350b11fb, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffff801434ce076, If non-zero, the instruction address which referenced the bad memory
Arg4: 0000000000000002, (reserved)
CPUID: "Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz"
MaxSpeed: 2700
CurrentSpeed: 2694
BIOS Version ... Read more

Read other 9 answers


I've recently had a few alarming issues with my PC, the most recent ones relating to BSODs. The first BSOD was an error '0x0000003b'. According to Bluescreenview, it had something to do with my Nvidia drivers. This happened when I was running ModernWarfare 2 in the background, Skype, Google and VLC media player. This was about 2 or 3 days ago. I once again had a BSOD today. This time, it was an error '0x00000050' and had something to do with Direct X. It happened shortly after I exited Modern Warfare 2 and had Skype, Google chrome and VLC media player running. I have not tried any heavy games like BF4 or Watch Dogs recently, but they played fine a few weeks ago.
Some extra details: Very recently, a little over a week ago, I had changed a BIOS setting (disabled legacy booting) after which my PC did not turn on. It gave 3 beeps. I had removed one stick of RAM and my Graphics card, and flashed the BIOS, after which it ran fine. I decided to re-install Windows. I had lost my Windows 8 disk, so used Windows 7 instead. This fairly new installation of Windows 7 seems to be causing a problem. Also, I tried doing a Memory Diagnosis of Windows. I do not believe it found any errors. Another interesting note is that several games have crashed on my old installation of Windows 8 due to my Graphics driver not responding or some Direct X error, but it never caused any BSODs.

My specs: Intel DH61WW, 8Gb of Ram (2 sticks of 4gb Corsair memory), GTX 550Ti 1gb Inno 3D, Intel i5 230... Read more

A:Windows 7 BSOD Errors '0x0000003b' and '0x00000050'.

Hi Abul Rahman Ema.

You have two crash dumps in the uploaded zip and none of them has anything with nvidia driver.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us back about any further BSOD after installing Service Pack 1.

BugCheck 50, {fffff900c225bcf0, 0, fffff9600032c69d, 0}
Could not read faulting driver name
Probably caused by : win32k.sys ( win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+2d )

Followup: MachineOwner

BugCheck 3B, {c0000005, fffff960001a4283, fffff88005a6c020, 0}

Probably caused by : win32k.sys ( win32k!HmgLockEx+a3 )

Followup: MachineOwner

Read other 9 answers

Hi guys, I have been experiencing BSOD crashes for a few months now. I wasn't really sure what to do but now that they have become more frequent (normally 1-3 a day) I have come to you guys for help. I'm not completely computer illiterate and I've followed the appropriate error posting instructions. Any help is hugely appreciated, thank you.

Windows 7 Home Premium
- x64
- Windows 7 Home premium first and only OS on PC.
- Have owned the computer for about a year and a half.
- I haven't re-installed the OS at any point.

Thanks again, Nambarc.

A:BSOD generally at startup, errors: 0x0000000a and 0x0000003b.

> Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST


Microsoft Security Essentials - Free Antivirus for Windows

> These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

* If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

* If you have raid update its Driver.


*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+

Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resor... Read more

Read other 6 answers

Hey there, I've been getting BSOD whenever I put a considerable load on my pc. It occurs mainly when I'm playing a game but sometimes it happens like when I'm converting files and have a bunch of tabs open in chrome.
I keep the graphics card drivers up to date and performed a clean install on the last one which was ~2 weeks ago, but the problem still persists. I also moved the memory sticks to different slots but that didn't really change much either.
I'm starting to think it's a memory problem, but as I'm still rather new to diagnosing bluescreens, I'm not really sure and would like a second opinion before I spring for a new set of sticks.
Thanks for reading

A:BSOD when gaming, mainly errors 0x0000001e and 0x00000050

I would do a memory test using the steps in the following link:

Diagnosing memory problems on your computer

And yes; i believe you are right; it does sound like issue with one or more sticks; and/or one or more possible ram slots/connectors.

Read other 4 answers

I've had this computer for a few years now, close to 3-4. About a year or so ago I upgraded to Windows 7 Ultimate 64 and a few months afterwards the BSOD started up again (had them in Vista as well).
System/Model Number: HP Pavilion dv7-1245dxCPU: AMD Turion X2 Dual-Core Mobile RM-72Graphics: ATI Radeon HD 3200
Sometimes it's when sitting idle, sometimes while playing a game, more recently though it's while just browsing the internet.

Can't quite figure out what's wrong, although it the problem in all of the errors seems to be ntoskrnl.exe

Any assistance would be lovely, thank you.

A:Constant different BSOD 0x0000001e, 0x1000007e, 0x0000003b


Please upload your msinfo32.nfo file. To get this:
Click on the Start
Type msinfo32 into the Search programs and files box
When it opens, go to File, Save
Save as msinfo32.nfo and save in a place you will remember
Let it finish the process of gathering and saving the system info
Right click the .nfo file, click send to compressed (zipped) folder
Upload the .zip file here.

Some very old drivers of the ATI card and Atheros network adapter need to be updated.

Atheros network adapter, source:Driver Reference Table
ATI Video driver (remove the Catalyst Control Center and only install the Display Driver), source:Driver Reference Table
OR from here:Download AMD Catalyst Drivers 12.8 Vista 64 - FileHippo.com

Uninstall older drivers via control panel first and for remnants of drivers, use Driver Sweeper to clear that up.

Run the System file checker and Disk check:SFC /SCANNOW Command - System File Checker
Disk Check

Let us know the results

Read other 3 answers

This has been happening for a while now, I have done multiple restores, but this has not fixed the problem.
Originally my computer was crashing because of Kaspersky but now it is just being completely funny.

Sometimes it blue screens, other times it will just turn off and on again.

I have two dump files, but I do not know how to open them sorry!

Thank you for helping me


According to google, it's graphics card issues.

A:BSOD just browsing internet 0x0000003B - 0x0000001E

Hi, please complete the steps below:

Based on the bugchecks, I would recommend you follow and complete the steps given below:1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload ... Read more

Read other 2 answers

I am getting multiple BSOD daily. I reinstalled Windows and again the same problem.
Here are some brief details of my computer. It is a custom buit computer which I bought a year ago. The original OS Windows Ultimate 64.
Current OS Windows 7 Enterprise (x64) Service Pack 1 (build 7601)
Processor 2.80 gigahertz AMD Phenom II X6 1055T
Motherboard ASUSTeK Computer INC. M4A78T-E Rev 1.xx
Bios American Megatrends Inc. 3406 08/20/2010
Memory 8192 Megabytes Usable Installed Memory
Video Card AMD Radeon HD 6800 Series

Other details are in the attachement.

I have run memory and HD diagnostics they have come clear and also checked for malware using malwarebytes.
Any help in solving this will by appreciated.


A:BSOD 0x00000019, 0x00000024, 0x0000001e, 0x0000003b

Got a BSOD. Uploading the dmp file.

Read other 9 answers

Hello. Last night i opened my pc, logged in at windows and then after a few minutes windows crashed with BSOD and rebooted. I went to windows again and they crashed once more. The 3rd time i booted successfully and windows didnt crash for at least 2-3 hours, but when i went away for 10 minutes they crashed again, without generating a dump file. Today windows crashed once more, generating a dump file and to my surprise fedora crashed as well, and i've been thinking that its probably a hardware related issue. I tried to read the dump files with blue screen viewer and the only thing i understood was that the first crash dump had the files ataport.sys ntoskrln.exe and tcpip.sys pointed out, while the second had ntoskrnl.exe and tcpip.sys and the third had the ntoskrnl.exe and win32k.sys.Im posting the dumps here. Thanks for your time!

A:BSOD All of a sudden, error 0x0000001e once and 0x0000003b twice

Host Name: ADAM-PC
OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Adam
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Counterfeit installations such as yours contains heavily modified code that causes the installation to behave it unexpected ways. Analysing BSOD's and determining their causes on these sorts of installations is very unreliable.

My recommendation is to start with a clean slate, and install a genuine version of Windows. This will minimise the problems you are experiencing, and make subsequent diagnosis of BSOD's far more reliable. Once you are running a genuine Windows installation, and are still experiencing BSOD's, we will be happy to help you solve them

Read other 2 answers

Hey guys.
For the past 2 weeks I've experiencing BSOD's when leaving (Alt+tab or even "exit game") World of Warcraft.
It's totally random, sometimes I got it, sometimes not. It seems to be more commom when I'm also watching something on youtube.
Sometimes it also happens when I'm turning off the pc.
And sometimes when loading game ui (like when I change map) it just freeze and I have to reboot my pc.

I've tested memory already with memtest, did the driver scan and windows memory scan and no error found.
I formated my drive and installed windows all again, but it didn't helped either.
I just don't know what to do. =/ I hope someone here can help me.

Well, I've uploaded my Dump file with this thread, if anyone can help me identify the source of the error and how to solve it, I'll be really very gratefull.

A:BSOD when leaving game. error 0x0000003b, 0x00000050 and others

# localhost name resolution is handled within DNS itself.
# localhost
# ::1 localhost genuine.microsoft.com mpa.one.microsoft.com sls.microsoft.com
What is the source of your Windows 7 installation?

Read other 5 answers

I've gotten 4 BSOD in the past month or so. It tends to happen when I'm shutting down chrome but oblivious not every time. I think it might have to do with my new ssd link. I did not have this problem before installing my ssd. I'm hoping you guys can point me in the right directing here because i really have no clue how to fix this. Thanks

A:BSOD when shutting down chrome (randomly) 0x0000003b, 0x00000050

Hi Hoody2456.

You havent installed Service Pack 1 after installing windows to the SSD. Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Report us for any further BSOD after doing it.

Read other 1 answers

Hello All,

First off Thank you for looking at this post. I will begin with some history with this machine. I am Running an Asus N56VZ I will attach all the Specifications for this in a text file. I Keep getting random BSOD as you can see in the title they are random but i have gotten each at least twice. I have read online that first off this laptop has issues with the stock memory that comes in it because the timing is off. I bought memory that is of the correct timing. I just tested the memory today with Memtest86 and it all checked out. I updated all my drivers they are all of the latest. I Completely removed my Nvidia Graphics card drivers (also hit delete driver under computer management when i installed) and reinstalled it using the lasted drivers through Nvidia's website. Updated my chipset driver, storage controller driver. I am not sure what else to do. although people online all have memory issues with this laptop and they all either buy the memory i have or they use a modded bios. I already made a post requesting a modded bios on biosmods and am waiting for someone to make one. I figured i would see if someone else can shed some light on this issue. I will attach the .dmp files as well.

Thank you,
Ben M

Read other answers

for the last few weeks I have been receiving a whole bunch of BSOD errors. I have tried absolutely everything I possibly can to resolve this issue. I ran a memtest86 for 8-9 hours with 4 passes and no errors, I have completely removed my HDD's and replaced with a new SSD drive and I have also updated my BIOS but to no avail I seem to be still suffering from BSOD..

Any help would be massively appreciated.

PS: x0000000a and 0x0000010e BSOD were received after I had updated my BIOS.

here is my DM collected log with my DMP files:

A:Multiple BSOD errors 0x0000010e 0x00000001 0x0000000a 0x0000003b

This is either graphics driver issues or GPU failure.

I recommend ruling out the possibility of a failing graphics card first.
Run Furmark by following these instructions. (Run for around 30 minutes.)

Video Card - Stress Test with Furmark

fffff880`0837c738 fffff880`042fa22f : 00000000`0000010e 00000000`0000001f fffff8a0`0a4a7dd0 00000000`00000000 : nt!KeBugCheckEx
fffff880`0837c740 fffff880`04a211d0 : fffff8a0`0a4a7dd0 fffff8a0`0a4a7dd0 00000000`001f8ed3 00000000`00000000 : watchdog!WdLogEvent5+0x11b
fffff880`0837c790 fffff880`04a1e9d3 : 00000000`00000000 fffffa80`1508b050 00000000`00000c3a fffffa80`154350f8 : dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForSubmission+0x148
fffff880`0837c7d0 fffff880`04a387d9 : 00000000`00000000 fffff8a0`090f6120 fffffa80`00000000 fffffa80`14fe7660 : dxgmms1!VIDMM_GLOBAL::PrepareDmaBuffer+0xe1b
fffff880`0837c9a0 fffff880`04a38514 : fffff800`00b96080 fffff880`04a37f00 fffffa80`00000000 fffffa80`00000000 : dxgmms1!VidSchiSubmitRenderCommand+0x241
fffff880`0837cb90 fffff880`04a38012 : 00000000`00000000 fffffa80`152161a0 00000000`00000080 fffffa80`132ec410 : dxgmms1!VidSchiSubmitQueueCommand+0x50
fffff880`0837cbc0 fffff800`033702ea : 00000000`01c9340d fffffa80`12e6ab50 fffffa80`0d318990 fffffa80`12e6ab50 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`0837cc00 fffff800`030c48e6 : fffff800`0324ee80 fffffa80`12e6ab50 fffff800`0325ccc0 fffff880`01b7038f : nt!PspSystemThreadStartup+0x5a
fffff880`0837cc40 00000000`00000000 : 00000000`00000000 00... Read more

Read other 9 answers

BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007F. So far.

I dont know what the heck is going on, but it seems to crash mostly when I am playing Battlefireld 3. I ran a diagnostics check and nothing came from it. I also did a stress test on my Video card (Nvidia GeForce 560 Ti) and nothing came from that either.

My system is an Alienware Aurora
Mother board is Alienware w Intel Core i7 920

A:BSOD Playing BF3 error 0x0000003B, 0x0000000D1, 0x0000000A & 0x0000007

Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers

I'm new to this whole crash analyzing thing so I'm sorry if a messed something up.

I included the .zip in the attachments.

Let me know if you need anything else.

Thanks for the help!

A:Random BSOD, 3 crashes, error 0x000000d1, 0x0000000a, and 0x0000003b

Welcome to Seven Forums.

Kaspersky is often a cause of BSOD's. Please uninstall it for the time being and keep MSE. You can install i back if it was not the cause of your BSODs. Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately: Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free

Do not start the trial version of MalwareBytes

You may also take a look at: Good & Free System Security Combination
Reduce the start-up items, Antivirus software is basically whats required. Remove Startup Programs in Windows 7
Clean Startup in Windows 7
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible: Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow - read here
Run Disk Check on your Hard Drive for file system errors and bad sectors on it - read here
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Tes... Read more

Read other 1 answers

i m getting BSOD when the laptop starts and just after the start. Also, i get BSOD every time when i try to restart my laptop. The most common BSOD is
1. 0x0000003b (SYSYTEM_SERVICE_EXCEPTION) - 14 times

The other BSOD are :
1. 0x000000d1 (DRIVER_IRQL_NOT_LESS_OR_EQUAL) - 3 times
2. 0x0000001e (KMODE_EXCEPTION_NOT_HANDLED) - 3 times
3. 0x000000a (IRQL_NOT_LESS_OR_EQUAL) - 4 times
4. 0x0000007e ( SYTEM_THREAD_EXCEPTION_NOT_HANDLED) - 3 times
5. 0x000000019 ( BAD_POOL_HEADER) - 3 times
6. 0x00000050 ( PAGE_FAULT_IN_NONPAGED_AREA) - 1 time
7. 0x00000024 (NTFS_FILE_SYSTEM) - 1 time
I have recently upgraded my RAM from existing 3gb to 6gb. I removed the 1gb ram and putted the NEW TRANSCEND RAM IN SLOT 1 and 2gb HYNIX RAM in slot 2.
I have also RAN the MEMTEST86 3-4 times with no error. The BSOD usually occurs after each 1 week and 3-4 times a day. Also, the timings of both the RAMS are same. I am using 1333 mhz ram on my 1066 system. I m NOT OVERCLOCKING ANYTHING. The picture i have submitted is with 4 gb NEW RAM only.
OPERATING SYSTEM - WINDOW 7 ulitmate 64 bit
PROCESSOR - intel i 3 m350
I have uploaded the minidump files date wise . PLS HELP ME !!!!!!

A:Getting BSOD 0x0000003b(most common), 0x0000001e, 0x000000a,0x0000007e

Follow the http://www.sevenforums.com/crashes-d...tructions.html so we can get all of the crash files at once and better determine the problem.


Read other 6 answers

This has been happening ever since I bought my PC 2 years ago. I've taken it to a lot of technicians several times who ran hardware tests and found nothing, thus weren't able to diagnose the problem. It keeps happening even after I've formatted it multiple times. It crashes mostly while gaming, but sometimes when I'm simply browsing the web too. either it freezes with colored bars on the screen or a blue screen happens (mostly the latter). also it's mostly 0x0000001e or 0x0000003b

im not sure what this bump contains though, but this is what mostly happened before the format.

Temperatures are normal, video card drivers are up to date, passed all memory tests. Hardware seems to be fine. PLEASE HELP ME!

OS: Windows 7 Ultimate 64-bit
Motherboard: ASUS M4A88T-M USB/3
CPU: AMD Phenom II x4 965 BE 3.4Ghz
GPU: Asus Radeon HD 6850
PSU: Corsair CX-500W
HDD: Seagate Barracuda 500GB 7200rpm & Seagate Barracuda 2TB 7200rpm

A:BSOD (0x0000001e and 0x0000003b); freezes and crashes while gaming!

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8005f13ab0, fffff80000b9c518, fffffa8006df4310}

*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys

Followup: MachineOwner
Its your graphics drivers causing a problem here.

Have your tried uninstalling the catalist control center?

Read other 9 answers

Hi I hope someone can help me, I am new to all of this error reporting but I've tried to use the web to find answers before coming here, and I hope I have attached all the necessary files:

I am running Windows 7 Home Premium 64 bit version, here's a rough look at my system:

8gb ddr 3 1600 (part no. CT2KIT51264BA160B - not sure that's any help)
AMD Phenom II x4 955 3.2ghz CPU
Line 6 Toneport UX2 Soundcard (usb interface)

I am not overclocking anything and my PC runs a ton of applications fine, I use it to record live music via my toneport soundcard and I edit and render videos with Sony Vegas fine, I just get a BSOD when using any games within 1 to 2 hours.

I have tried clean drivers for my GPU, even using a driver sweeper software from safe mode. I have tried to check that all my drivers are up to date in fact.

I have plenty of free space on my hard drive, and my PC case is very cool, the temps are around 28-30 degrees for the board and cpu at idle and 30-38 at load.

the gpu temps are 56 degrees max when playing games etc.

I've tried everything except dropkicking it! I see a lot of errors like mine but I don't have the skills to solve this puzzle, please help!

Thanks for reading this

PS. All the components bar the CPU are less than 6 months old, free from dust and securely fastened!

A:BSOD Playing Skyrim, BF3 and SW:ToR error 0x0000001e and 0x0000003b

Welcome to Sevenforums; I hope we can be of assistance. Bear with me as this takes a bit of time to digest all the information in the bug report you filled out; usually ~20-30 minutes. I will try to post the most relevant information first.

Read other 9 answers

Hello, I hope this post is in the correct format and allow me to thank you in advance for any help you can provide.

I have been getting BSOD when playing StarCraft 2. I reinstalled the OS and the PC ran completely fine for around 3 - 4 hours. Then I reinstalled SC2, downloaded the patch and played 1 game before receiving BSOD.

Attached you will find the dump files.

Windows 7 Home Premium 64bit, SP1
pny xlr8 nvidia geforce gtx 550 ti
6.0gb RAM
AMD Athlon II x4 645 processor 3.10Ghz

A:BSOD When Playing StarCraft 2, error 0x00000050 & 0x0000001e

BTW, I am not overclocking anything. The only setting I altered with EVGA Precision was the fan speed. I turned it up to increase cooling.

Read other 8 answers

Could really use some help in determining what's amiss. The crashes seem to randomly occur, at least nothing that I can pin point. I also tend to think this may be cause by both drivers and hardware as on at least two occasions the computer would not restart. When powered on, it failed post and went into a series of rapid beeps. I don't believe heat is an issue but it has taken awhile before I'm able to get it to reboot on those two occasions. I've read the posting rules and I believe all of the system info is listed on my profile and hopefully I've uploaded the dump file. but please let me know if I've missed something or there is additional information required.
Thanks in advance!

A:multiple random BSOD's ERRORs 0x0000001e and 0X0000003b

Hi darenot.

There is a high possibility that the BSODs are caused by NVIDIA nForce Serial ATA Controller. The storage controller element of nvidia chipset; specially RAID. c:\windows\system32\drivers\nvstor64.sys

fffff880`02f1ba40 fffff800`02ad15d1 CLASSPNP!TransferPktComplete+0x1ce
fffff880`02f1bac0 fffff880`0110d6c8 nt!IopfCompleteRequest+0x341
fffff880`02f1bbb0 fffff880`0110d443 storport!RaidUnitCompleteRequest+0x208
fffff880`02f1bc90 fffff800`02ad830c storport!RaidpAdapterDpcRoutine+0x53

fffff880`02f1b978 fffff880`0117500fUnable to load image \SystemRoot\system32\DRIVERS\nvstor64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvstor64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvstor64.sys
Which is too old.

Image name: nvstor64.sys
Timestamp: Tue Jun 23 03:53:37 2009 (4A400469)
It is almost impossible to find updates to nvidia chipset nowadays; specially for such an old HP.

BiosVersion = 5.27
BiosReleaseDate = 06/10/2008
SystemManufacturer = Hewlett-Packard
SystemProductName = D5468AT-ABA ALONPAV
So I would suggest you to get rid of the nvidia elements and use windows system native elements.

Boot into the BIOS. Disable RAID. Then perform a Clean Reinstall - Factory OEM Windows 7

If you follow the guide step by step, it will lead to a perfect windows install which is driver complete itself. No need to install any drivers from nvidia o... Read more

Read other 1 answers

I'm getting seemingly random BSOD while playing Guild Wars 2. During a 2h play session I'm bound to get atleast one BSOD.

I'm using a new computer with a fresh version of Windows 7 Ultimate x64 and Sapphire Radeon HD 7850 2GB GDDR5 PCI-Express 3.0. No overclocking.

I have tried memtest86, mdsched, chkdsk /r, sfc /scannow without any errors. I have downloaded the latest graphics drivers and no change. I have played around with the power settings in BIOS without success.

I think there may be a driver issue. There are a lot of old drivers in my DriverList.txt but I cannot figure out which one might be the problem.

Any help or pointers are appreciated!

A:BSOD while playing Guild Wars 2, 0x0000001e, 0x0000000a, 0x00000024

You are having two problems, as our latest dumps say.

► The ATI display driver is causing a huge problem there.

fffff880`091c5148 fffff880`04006345Unable to load image atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
fffff880`091c5150 fffff880`091c51d0
fffff880`091c5158 00000000`00000000
fffff880`091c5160 fffff880`091c5210
fffff880`091c5168 fffff880`04006345 atikmpag+0x6345
fffff880`091c5170 fffffa80`08097000
fffff880`091c5178 00000000`00000000
fffff880`091c5180 00000009`00000048
fffff880`091c5188 fffff880`00000001
fffff880`091c5190 fffff880`091c51c0
fffff880`091c5198 00000000`0006fd86
fffff880`091c51a0 00000000`00000001
fffff880`091c51a8 00000000`00071e71
fffff880`091c51b0 fffff880`091c51e0
fffff880`091c51b8 fffff800`02ec1ab5 nt!RtlGetExtendedContextLength+0x19
fffff880`091c51c0 00000000`00000000
fffff880`091c51c8 00000000`000710d0
fffff880`091c51d0 00000000`00000000
fffff880`091c51d8 00000000`00000000
fffff880`091c51e0 00000000`00000000
fffff880`091c51e8 00000000`00000000
fffff880`091c51f0 000004e8`fffffb30
fffff880`091c51f8 000004d0`fffffb30
fffff880`091c5200 00000000`00000019
fffff880`091c5208 00000000`00000000
fffff880`091c5210 fffff880`091c5300
fffff880`091c5218 fffff880`0490f360Unable to load image atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ... Read more

Read other 3 answers

Specifically BSoDed twice in 1 day, once when alt-tabbing from Dota 2, and the other when playing Wakfu. Chrome was active during both instances. I am not certain about the older crashes and I think that the last two are not connected to the others.

BlueScreenView gives the bug string for the 2 latest crashes as PAGE_FAULT_IN_NONPAGED_AREA and SYSTEM_SERVICE_EXCEPTION

Majority of the crashes point to ntoskrnl.exe in BlueScreenView, but I have heard that it is not the actual culprit in most cases.

So far I have run Memtest with no errors, passed a HDD scan, also Furmark and Video Memory Test have run with no problems. I'm not sure how to pinpoint the problem further or even whether it is hardware or software issue. However, I have not attempted to run any games since the BSoDs appeared.

I did update the Nvidia drivers with GeForce Experience and Msi/Intel drivers using LiveUpdate 5 after the earlier BSoD on the 28th as other BSoD threads said to ensure that all your drivers are updated. Daemontools Light and Alcohol 52% have been uninstalled since the 28th BSoD as well.

No device is overclocked.

Desktop specs are as follows:

MB: Z77A-G43 (MS-7758) (MSI)
CPU: Intel Core i5-3470 CPU @ 3.20GHz
GPU: Nvidia GeForce GTX 650 Ti
Memory: 8.00 GB RAM (Corsair brand)
Hard Disk: Hitachi HDS721010CLA630
OS: Windows 7 Ultimate x64
Antivirus: Windows Defender

Attached is the SF Diagnostic Tool zip.

I'm stumped as to the causes and how to solve it, and help ... Read more

A:BSOD when playing games/videos , error 0x0000003b, 0x00000050

OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7600 N/A Build 7600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Yong Zhen Yu
Registered Organization:
Product ID: 00426-OEM-8992662-00009

# localhost name resolution is handled within DNS itself.
# localhost
# ::1 localhost validation.sls.microsoft.com
I recommend formatting the disk and installing a genuine Windows 7 installation. Counterfeit installations are notoriosly difficult to diagnose because they behave in unexpected ways due to the heavily modified code they contain, and many analysts will not even attempt it.

Read other 1 answers

My computer has recently taken to blue screening seemingly at random. I recently had a virus that was cleaned up with Spyhunter 4. The system was fine for a few days then blue screened when I was away and restarted throwing the 3b error. Over the past few days the errors have become more and more common. I've checked the computer with whocrashed and got the following results:

On Mon 4/27/2015 7:52:08 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\042715-23150-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x72A10)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Mon 4/27/2015 7:52:08 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0x295B1)
Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
file path: C:\Windows\system32\drivers\atikmdag.sys
product: AT... Read more

A:BSOD at random times error 0x0000001e, 0x00000034, and 0x0000003b

Hello and Welcome to SevenForums

Run MemTest86+ for 8 passes. I know that you ran a memory test but MemTest86+ is the most accurate out there. RAM - Test with Memtest86+

Run Driver Verifier for 24 hours. Driver Verifier - Enable and Disable
Your computer may run slow but that's because Driver Verifier is running. If you crash when you start your computer after running Driver Verifier go into Safe Mode and disable it. Safe Mode

Read other 5 answers


Yesterday I encountered four completely random BSODs.
Two while I was just browsing about the internet,
One literally right after bootup
And another one while I was playing SimCity and watching a stream. The one while playing SimCity popped up saying 'Hardware Malfunction' a a seperate-ish BSOD window before the new one happened.

My specs:
CPU: i5-3570k @ stock clock
GPU: MSI GeForce GTX 780 (reference card)
RAM: 16GB Kingston HyperX Beast @ 2400mhz.
Motherboard: Asus P8Z77-V LX
SSD: Kingston SSDNow v300 120GB
Storage: 2x 1TB HDDs which I cannot remember the brand of.

A bit more info.
My RAM is supposed to run 2400mhz, but I have to set it to that in the BIOS manually or it'll detect and set it to 1333mhz. It seems after changing the RAM clock to the 2400mhz, that's when I encounter most BSODs. This is what I think may be the issue, but I can't understand minidumps for the life of me, so I thought I'd ask for some help to see if I'm correct, and to see if you guys perhaps have any ideas of what to do.

I've uploaded the dump files to SkyDrive. https://skydrive.live.com/redir?resi...LnfC3Ib1WOdphY

On a side note I have some different issues which has nothing to do with BSODs, really, but sometimes all my USB devices will disconnect. I'm pretty sure this is a driver issue with Razer's drivers, as I'm using a Deathadder, Blackwidow Ultimate and the Megalodon headset from them.
Although it may be my external mix (A Samson GO clip mic thingy) be... Read more

A:Random BSOD, error 0x000000fc & 0x0000001e & 0x00000109 & 0x0000003b

Hello and welcome Darkenager mate have almost the same board I set mine in increments (RAM) to so go to say 1600 and then try 1866 it is still a decent speed all the same. Then increase until it baulks again. Mine is set manually after I tried the XMP and the RAM would default back to the 1333 the highest this board is supposed to go is 2133 by my manual.

I am away from home at the moment and on my 8 machine so I cannot tell you exactly see this for some info Ivy Bridge Overclocking Guide ? Asus Motherboards

Read other 3 answers

As said above in the title, I have been getting multiple BSODs on this new build. The build is using mostly old parts except for the motherboard, CPU, PSU, and card reader. The HDD, ODD, and RAM are all reused from previous computers.

It's been almost every day that I would get a BSOD on this machine. The major driver files seem to be ntoskrnl.exe and Ntfs.sys. A few other ones have shown up as well, such as dxgmms1.sys and win32k.sys.

The BSODs seem to occur at random times, however most recently they have occurred when watching .avi videos in full screen.

I have attached below all the minidumps that I have along with the last few events in event viewer. There are tons of errors in event viewer.

The specs of the computer are as follows:
AMD Athlon II X2 250
Motherboard is part of the Shuttle SA76G2 V2
2x 2GB OCZ2P8002G PC2-6400
Windows 7 SP1 X64
Onboard HD Radeon 3000

Please let me know if you need anymore information.

A:Multiple BSOD erros (0x0000003b, 0x0000007f, 0x0000001a, 0x0000001e) &


Read other 9 answers

I have been dealing with BSOD for a while now, they seem to be occurring mostly during web browsing (Firefox) and listening to music (Zune software).

A:Random BSOD multiple errors: 0x000007e, 0x00000050, 0x0000001e, 0x0000

It looks like a combination of Bit defender failing for some reason:

fffff880`07eb9368 fffff880`012f75d4Unable to load image \SystemRoot\system32\DRIVERS\avc3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avc3.sys
*** ERROR: Module load completed but symbols could not be loaded for avc3.sys
Driver Reference Table - avc3.sys
And your graphics drivers being very out dated:

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88004e605fe, fffff880072789f8, fffff88007278250}

Probably caused by : atikmdag.sys ( atikmdag+4425fe )

Followup: MachineOwner
Driver Reference Table - atikmdag.sys

Time stamp on your video card drivers:

kd> lmvm atikmdag
start end module name
fffff880`04a1e000 fffff880`05352000 atikmdag T (... Read more

Read other 7 answers

Hello, I'm running Microsoft Windows 7 Professional 64-bit on my HDD, I am getting frequent BSOD while playing games, watching and downloading videos. There are multiple different errors and the errors are the not same. I am getting errors:
(1) 0x00000019 - BAD_POOL_HEADER
(4) 0x00000116 - No bug check string

Thank you for the help I really appreciate it!

Read other answers

Had a BSOD on Sunday. Took the sides off the computer to find the heatsink caked in dust. Cleared that out with some compressed air and seemed to do the trick just fine. Computer fan running much quieter too then.

All fine on Monday and then cranked the PC up this evening and BSOD again. Couldn't get Windows to start, so tried removing RAM and then removing all hard drives except my boot drive containing Windows. Set up is SSD with Windows on, second SSD with programs on, HDD for files and data and second HDD for backup; that set up has been running fine for some time.

Have managed to get Windows to load and no BSOD currently, with three drives plugged in and the main HDD for data NOT plugged in. Not sure if that drive is the common problem.

Some BSOD messages I have seen, before it vanishes, include PAGE_FAULT_IN_NONPAGED_AREA and REGISTRY_ERROR and SYSTEM_SERVICE_EXCEPTION

Any help and advice much appreciated. The diagnostic data was run without said HDD plugged in.

Brief update.....
PC still running but trying to shut down, I get a Windows Explorer has stopped working error, as below. Could this be linked to the other drive not being plugged in? The unplugged drive contains my 'Desktop' so I wonder if this is confusing Windows somehow. Only way to shut down seems to be to just power off.

Problem signature:
Problem Event Name: APPCRASH
Application Name: Explorer.EXE
Application Version: 6.1.7601.17567
Application Timestamp: 4d672ee4
Fault Module Na... Read more

A:BSOD multiple errors, error 0x00000050 and error 0x0000003B

Hiya and welcome to SevenForums!

BugCheck A, {fffff900008d1ee9, 0, 0, fffff80002ad41dc}

Probably caused by : win32k.sys ( win32k!AllocThreadBufferWithTag+24 )

Followup: MachineOwner
Hmm, re-install Windows as your getting 0x51 errors because 0x51 errors are registry related errors.

Read other 9 answers

Frequent and annoying BSOD bugcheck was: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000) and 0x0000000a (0xfffffa0006bbb0d0, 0x0000000000000002, 0x0000000000000000, 0xfffff80002f2d35f).
Memory tests good ran through 10+ loops memtest 86+ windows memory diagnostics finds no errors

Please help if you can

Read other answers

Hey everyone,

I got a new computer last week and so far I've had 2 random BSODs. Each time the audio playing began to stutter and then a second or so later a blue screen appeared. After the reboot both times my external wi-fi dongle (netgear wna-3100) stopped working and I had to unplug it and replug it in.

I updated all drivers relating to networking (the dongle and the realtek driver) after the first BSOD but that didn't seem to solve the problem.

Thanks in advance.

A:2 BSODs 0x0000003b & 0x00000050

Any ideas? The first BSOD happened when I was using Skype and the second happened when I was watching a video (using MPC-HC).

Read other 4 answers


I ave a dell inspiron N5110 laptop, which experiences seemingly random BSODS:

Could you help me resolve this issue?
Thank you.

A:Random BSODS: 0x0000001e and 0x0000003b

It looks like your BSOD is being caused by Comodo:

fffff880`091c7398 fffff880`02d04c77Unable to load image \SystemRoot\System32\DRIVERS\cmdguard.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cmdguard.sys
*** ERROR: Module load completed but symbols could not be loaded for cmdguard.sys
Driver Reference Table - cmdguard.sys

Please uninstall Comodo then replace it with a combination of Microsoft Security Essentials and Malwarebytes anti-malware. Tip when install in Malwarebytes be sure to uncheck the box offering to start a free trial.

Read other 4 answers