Over 1 million tech questions and answers.

Forcing driver to load at first boot

Q: Forcing driver to load at first boot

I am operating a pc, laptops and a printer via a D-Link wireless intranet (adapter, router, print server, USB adapters). Much too often pc adapter and router do not talk to each other, only after the second boot. Is there a way to force the adapter driver to load at first boot ? Thank you for your advice.

Hermann

RELEVANCY SCORE 200
Preferred Solution: Forcing driver to load at first boot

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Forcing driver to load at first boot

Read other 9 answers
RELEVANCY SCORE 55.6

Hi Team,

We are using Internet explorer 11 browser and our application can work only on document mode IE=5, I tried the web pages to forcefully load in IE=5 by using the meta tag like below however it always loading in IE11 mode. Please help me with this issue.
<meta http-equiv="X-UA-Compatible" content="IE=5">

Thanks,
Srinivas

Read other answers
RELEVANCY SCORE 53.6

Hello, I tried to start Minecraft (a game that uses advanced openGL) and it doesn't work. So I tried everything. I updated my drivers, downloaded again etc etc. So I decided to try installing Windows 7 drivers. Well, CCC says it doesn't meet requirement and just exits. Is there any way to force the installation or somebody have a clue of how to fix this?

A:Forcing driver installation

First, I will demonstrate my noob level by asking, what is CCC?

Second, by saying "Windows 7 drivers," do you mean that you installed the drivers for Windows 7 normally, or that you installed the Windows 7 drivers in compatibility mode, or something else entirely? Until you tell me exactly what you did, I can't help you.

Finally, if you just want to play Minecraft, why not dual-boot Ubuntu and Windows 7? Ubuntu is a free, open-source Linux distro that is officially supported for Minecraft. With the addition of the also-free Wyne program, Ubuntu can run some .exe files, though NOT ALL.

Read other 4 answers
RELEVANCY SCORE 53.6

I am a ESET user and have Win10 on my Alienware 17 R1.
After several weeks of having 10 working stable on the laptop I noticed that anytime ESET would detect updates for the OS there were a list of devices such as processor and management tool updates that upon doing Windows update never showed up in my list
of update.  If I manually go into the device list after "Show Hidden Devices" I can find some of the things it listed since I didn't remember all of them but then tell the device manger to update the driver and it does just fine.  I want
the OS to update all of these without me having to hunt through the list every time to update them.
Is there a way to force Win10 to see the devices that have driver updates and force those updates to take place?

Read other answers
RELEVANCY SCORE 53.2

Hello, I had an issue with my Windows 8 where I was forced to reinstall it. I have completely wiped my SSD and reinstalled Windows 8 on it. However, now it will not let me pick my boot order. It is forcing me to use Windows Boot Manager as my Boot Option 1. If I use anything else, I just get a black screen with a blinking line cursor.

It didn't use to do this before I had to reinstall. I'm not sure how to fix this. It also will not let me choose F11 boot options, it always is forcing me to use Windows Boot Manager.

How do I make it so I can boot from whichever boot order I want, instead of using Boot Manager?
 

A:Computer will not boot to my SSD, it's forcing me to use Windows Boot Manager.

Read other 9 answers
RELEVANCY SCORE 52.8

I can't seem to get Windows 7 SP1 to load a driver for an HP printer that is on my home network. My laptop sees it but won't let me make it the default printer or load a driver so that I can link to it wirelessly. I restored my laptop back to windows 7
because Windows 10 was moving too slow. I only have 4gigs of memory, and windows 10 probably runs better with 8gigs of memory.

Read other answers
RELEVANCY SCORE 52.8

Got an HP 970cxi printer and running Windows 2000.

We have had this printer running just fine for over a year until we had to have it (the printer) serviced. We used the computer every day for the week while the printer was gone and when we reconnected it just a few days ago, the "New Hardware Found" wizard popped up after turning the computer on. Mind you, we didn't unload or reload the driver. We just disconnected the printer for a week and reconnected it again.

We have gone through the HP Uninstall process and removed the printer and all other printers and reinstalled the driver in an effort to remedy this annoying start-up of the "New Hardware Found" wizard popping up every time the computer starts; but, nothing helps.

It prints just fine; we just want to stop the annoyance.
 

A:Printer Driver Wants to Load on Every Boot.

Read other 6 answers
RELEVANCY SCORE 52.4

I'm working with a Dell Dimension C521 PC. It came with a PCI-Express video card which apparently has failed, yet the motherboard itself has on-board video. The system will boot using this video output (as opposed to the card which produced nothing) but when it finally gets to windows the auto-detect driver routine kicks in and begins to detect the video card, prompting the user to "Continue Anyway" to finish installing unsigned drivers. Unfortunately this event takes place in front of the installation of the USB keyboard and mouse (times like these I wish it had PS/2 ). Anyway, whether I boot up into Safe Mode or normal a prompt comes up about installing drivers for the on-board chipset. I can't interact with it because the driver install routine for the keyboard/mouse becomes interrupted.
 

A:Dell Dimension C521; USB key/mouse driver load interrupted by video card driver load

Bump. I've been thinking... the only way I think this can be fixed is if I boot from a Linux CD or something similar and delete a particular set of drivers for this video card. It can't prompt you to install any drivers if they don't exist, right? But I don't know where to go to delete such files and prevent them from automatically trying to install themselves. Any ideas?
 

Read other 2 answers
RELEVANCY SCORE 52

Hi!

I'm currently using Win8 Pro x64.
I'm not able to connect to my company's wireless network, and I came across a possible solution that proposed rolling back to an earlier driver version 9.2.0.419.
Trouble is, I'm not able to install this older driver because Win8 insists that my current driver is up to date. This happens even if I select "delete the driver" while uninstalling the currently installed driver.

Could anyone help me out with this? Thanks!

Read other answers
RELEVANCY SCORE 50.4

the following boot-start or system driver(s) failed to load: SRTSP SRTSPX
Anyone were seen that problem?
Laptop is a compaq and running windows Vistahome Premium
cheers

A:the following boot-start or system driver(s) failed to load: SRTSP SRTSPX

Ohh sorry.. got that from the event log..

Read other 3 answers
RELEVANCY SCORE 49.6

Just lately, my mouse cursor will all of a sudden freeze up, for about 5 seconds and then start moving again. But it then starts changing cursor shapes...goes from pointer to text entry then changes to a horizontal text entry. It also seems to have a red shadow around it when it starts doing this. I also notice my keyboard freezes up...can't change Num Lock, Scroll Lock or Cap lights.
 
I started looking in the event viewer to see what was going on during this time and it seems that event viewer always has the same Error:
 
Event ID: 14
nvlddmkm
\device\video5
!051d(2558)
 
.....source nvlddmkm cannot be found.
 
When this happens, I try to log off out of my user account but the issue seems to stay with me back into the login screen because it doesn't come back up...the screen just goes blank and then the monitor goes into a sleep mode, (I/O button on monitor starts flashing.) At this point I'm locked out and must push the computers start button to shut down power. Of course when I reboot, I'm presented with the Windows Error Recovery screen.
 
I also noticed that now when I log back into my user account, the HD light stays on steadily for a long time and everything loads slowly. I have CCleaner running at startup and it takes 5 minutes to even start the cleaning process. Once things are back up, eveything seems fine until the mouse starts freaking out again.
 
I just pulled my CPU fan off and cleaned out the cooling tower fins. I pulled out the ... Read more

A:Cursor/Keyboard Pausing, Forcing Hard Boot

This is a problem with the NVIDIA drivers.  Have you recently updated your video drivers?
 
If so, try rolling back the drivers to the previous version and seeing if that solves the problem.
 
I have seen a number of reported problems with recent updates to these drivers.

Read other 9 answers
RELEVANCY SCORE 49.2

Hi, I have installed The windows 7 OS on an SSD, and installed all apps and drivers. I then took a system image back up and was halfway through backing up my data to an external eSATA G-drive when it seemed like it had hung. I forced he whole system to shut down through pressing and holding the power button and not the boot time seems to have trebled! What do you think I did? What can I do to fix this? Is the best thing to do to restore from the system image I have just created? Thanks if you can help!

A:Slow boot time after forcing computer to shut down during back up

Hi Wadders, welcome to Seven Forums.
I would do a clean install + BPTT

Read other 4 answers
RELEVANCY SCORE 48.4

Hello,

Thanks for the previous help.

I am trying to get a Keyspan/Triplite USB to Serial Converter going, like it did in the past.

Their setup program puts all the files in the correct place, and they all seem to be there.
Have downloaded their installation files both from their site, and also a CD installation disk that came with it. Neither works.

Error Msg always the same in that "no device found," and also "Drivers not loaded"

Running the 64 bit version of W7.

There is nothing in Device Manager that seems to show the unit.
Even with view "Hidden" enabled, there are no "Ports" or "Com" category heading
There are only the ones under USB Serial Bus Controllers, and nothing in this listing seems to show the unit.

The unit might be bad, of course, but I feel it is something in my PC that is not allowing the Drivers to be loaded or accessed correctly. Cables are fine, and have tried various PC USB Ports.

Any way of "forcing" the Drivers to be loaded ? (everything else on PC seems to work fine)
(I am not competent enough to play with anything in the BIOS, etc.)

Thanks,
B.

A:"Forcing" Drivers To Load ?

The device must be recognized by the system before drivers will load.

In Device Manager, a device that is recognized but does not have drivers to function will be shown as an Unknown Device. Sometimes a device will show up in Devices & Printers too.

How is this device connected to the system?
Duh - never mind. USB

Read other 2 answers
RELEVANCY SCORE 46.4

Sorry if this has already been answered/wrong place. I looked at Google but thought I double check here (since the solutions via Google seem to be refering to a different OS to mine)

First of: Windows Vista, SP2, 64 bit.

Now sometimes (and not now since I am writing this) my Keyboard/Mouse just stops working. It freezes completely and I am unable to use it and am hence required to restart the computer. This happens at random occasions but it usually involves opening some program or what not (I noticed a prominent pattern that the mouse/keyboard freezes whenever I go to speedtest.com measure my speed and then once the download speed bar is finished and upload is about to begin my computer freezes).

I had a look at my event viewer and noticed this:

The following boot-start or system-start driver(s) failed to load:
i8042prt

Now I am not sure whether this appears at the start and then once I run a program or do something (like go on speedtest.com) the commuter then freezes (i.e. my mouse/keyboard is non-responsive) or the error message comes up after my computer freezes but any help in fixing this mouse/keyboard freezing would be very grateful.

The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg informa... Read more

A:The following boot-start or system-start driver(s) failed to load: i8042prt

Originally Posted by Petze


The solution to fixing this problem I founds was to go to Registry editor and change the Start D word from 1 to 4 (but I noticed some saying to delete it completely and yet other sources to change it from 1 to 0 and yet even others to change something that I don't even have under that folder). If I was to tamper with the reg information, is it possible that I wont ever get access to my keyboard/mouse? My worry is that I might change some value so that I will have no way of getting to the computer with the keyboard/mouse (I am not good with bios) and would not be able to get help on the internet since I can't connect!



It is bad idea

DWORD Start may have following values

0 -boot ,1 -system ,2- auto ,3 -demand, 4 -disabled. Surly if you'll set to 4 you lose access to keyboard and mouse.Don't modify anything.Find folder C:\Windows\Minidump pack it and attache to post.If Minidump folder is empty use verifier tool to diagnose wrong drivers read here:http://www.vistax64.com/973966-post8.html

Read other 33 answers
RELEVANCY SCORE 46.4

I checked through the Event log in Administrator tools.
I got the following error: The following boot-start or system-start driver(s) failed to load: BANTExt

What is it?

I googled BANTExt and found out it's BelArc Advisor. Is it true?

How do I stop this error?

A:The following boot-start or system-start driver(s) failed to load: BANTExt

Yes, BANText.sys is the Belarc Advisor system driver file.It is started automatically from a Run, RunOnce, RunServices, or RunServicesOnce entry in the registry everytime Windows starts.To prevent the error you would need to find and remove that entry in the registry.

Read other 11 answers
RELEVANCY SCORE 46.4

Hi all,
I have a problem with Vista Business.Naimly, every time I start the computer and look up into the computer menadgement/event viewer/administrative events it has an error msg:
The following boot-start or system-start driver(s) failed to load: i8042prt



-
System










-
Provider







[ Name]
Service Control Manager






[ Guid]
{555908D1-A6D7-4695-8E1E-26931D2012F4}






[ EventSourceName]
Service Control Manager









-
EventID
7026







[ Qualifiers]
49152










Version
0










Level
2










Task
0










Opcode
0










Keywords
0x80000000000000









-
TimeCreated







[ SystemTime]
2007-08-27T15:56:02.000Z










EventRecordID
26753










Correlation









-
Execution







[ ProcessID]
0






[ ThreadID]
0





















-
EventData






param1
i8042prt
I think this is regarding my video card (Gygabyte Nvidia 8600GTS) drivers?!But the card works pretty normally and the drivers are up to date.
Anyway there are also a lot of other error & warninig msgs regarding the volsnap and security update installation files.Maybe this due to the situation that I have installed both Vista and XP and there is a common problem with Vista working with XP/other and that is NO RESTORE POINTS... Read more

A:The following boot-start or system-start driver(s) failed to load: i8042prt

Problem Solution The following boot-start or system-start driver(s) failed to load: i8042prt 1.Go to Start > Run and put regedit.exe  and click  Ok 2.Navigator to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\i8042prt\Parameters in Registry Editor 3.Add a new REG_DWORD "Headless " and set the value to 1 4.Reboot the server. Regards,

Read other 18 answers
RELEVANCY SCORE 46.4

Each time I boot my computer, I receive the follow message in the Event Viewer System Log File:

The following boot-start or system-start driver(s) failed to load:
KmxAMRT

Here is the information that I see when I sent it to the Microsoft Support and Help Center

Product:Windows Operating SystemID:7026Source:Service Control ManagerVersion:5.2Symbolic Name:EVENT_BOOT_SYSTEM_DRIVERS_FAILEDMessage:The following boot-start or system-start driver(s) failed to load: %1

What I believe is happening is that all though I uninsulated CA's Anti virus package and installed Microsoft's Security Essentials, not all the CA software was removed.

Help in getting rid of this problem would be greatly appreciated.

Best regards,

Larry

A:[SOLVED] The following boot-start or system-start driver(s) failed to load:

Hi

See this document:
Uninstall failed

Select the correct CA product you had, download the Removal script and run.
Hopefully this will remove the CA Suite from your PC.

Read other 2 answers
RELEVANCY SCORE 46.4

Guys, I'm running Windows XP and recently when I turn on my PC it makes a single beeb and then seems to run OK.

Tonight, I was running Firefox and the system seemed to slow, before becoming completely unresponsive. I had Task Manager open at the time, however when I tried to shut Firefox down the PC started bleeping like mad and I was forced to do a hard shut down.

I waited about 1 minute and then rebooted and immedietly went into the Error log and found the following entry:

"The following boot-start or system-start driver(s) failed to load: StarOpen"

I tried Googling a fix with no luck and I can't find StarOpen in the Services, Apps or Program files. Nor could I find it listed in the Device Manager or the Boot-start list in msconfig.

Can anyone tell me how to fix this?
 

Read other answers
RELEVANCY SCORE 46.4

Ok I will copy and paste the message:

The following boot-start or system-start driver(s) failed to load:
aswSP
spldr
Wanarpv6

I found it in vista event viewer. I am currently running vista in safe mode and dont really want to restart the pc. This is my first post on these forums and they look great. SO please help!

MY PC Specs:
2 (1x1) gb RAM
1.6Ghz CEL E1200 Dual Core CPU
Vista Ultimate
CD Driver
256MB GFX Card
Nothing else you really need to know

A:VIsta The following boot-start or system-start driver(s) failed to load:

Could be spyware.

I would run a Trendmicro free scan.

Read other 3 answers
RELEVANCY SCORE 46.4

Everytime I start Windows, I see the following error in Event Viewer:
 
The following boot-start or system-start driver(s) failed to load: 
VBoxNetAdp

A:The following boot-start or system-start driver(s) failed to load: VBoxNetAdp

Do you have Virtual Box or Avast antivirus installed?

Read other 1 answers
RELEVANCY SCORE 46

Hello,

Has anyone ran into the Event ID in the Title?
(Event ID: 7026, Message: The Following boot-start or System-start Driver(s) failed to load: TMEBC)

The user is getting CHKDSK every time they boot up the machine and it fails within seconds of it starting.
I removed the Scheduled task under the AutoChk area in the Task Scheduler.

Anyone have anything on this driver or able to assist?

Zach

Read other answers
RELEVANCY SCORE 46

hi,

I am currently making a device specific module for microsoft MPIO. I have successfully installed the mpio and my own DSM. However, during start-up, an error message comes out saying: "At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details."

When I checked the event log, it says:

The following boot-start or system-start driver failed to load: TrailNavi

TrailNavi is the name of the device specific module that i am making. I am currently using a 32bit server with Windows 2003 OS.

I am trying to test my DSM, but could not do so because the driver can't be loaded..

Any help would be great..
 

A:The following boot-start or system-start driver(s) failed to load

bump
 

Read other 1 answers
RELEVANCY SCORE 46

Of late when I am powering on my PC, the power LED on the cabinet blinks but the HDD LED doesn't. The monitor displays, NO SIGNAL.
Then when I restart the PC and when it finally boots, I go to the Event Viewer and find this entry

The following boot-start or system-start driver(s) failed to load: atc

My PC Config:
ASUS M5A78L-M/USB3 MoBo
AMD FX 6100 CPU
Corsair Vengeance 8 Gigs RAM
Crucial MX 100 256 GB SSD
500+160 Seagate HDDs
ATI Radeon HD5450 GPU

Kindly advise what does the above error mean and how do I resolve it

Thanks

Read other answers
RELEVANCY SCORE 46

I recently had to install a new battery for my computer. After doing so I started having this problem and receiving the following Error from the "Service Control Manager" Event ID:7026   The following Boot-Start or System-Start driver(s)
failed to load: ppfd_vt_1_10_0_24    Param 1. The issues I am having are; Unable to completely "SHUT DOWN" unless I press the power button, this is after I have already selected the "shut down" option in the Start menu. Never
had to press the power button to power off my computer. Also, at "START-UP", I get as far as a black screen with a white flashing cursor in upper left-hand corner. At this point I am stuck, nothing takes me out of this state unless I press the "POWER"
button to shut-down. In order to start-up & Boot, I disconnect AC Adapter, remove battery, wait about 20 seconds, re-install battery, power adapter, and push power button. Now my computer is all good. Can anyone help me with this, I've researched for 2
weeks and am no where. Thanks for any help. My computer is quite old, 2010 Sept., but I'm hoping that I don't have to purchase a new one...(I'm a lil cheap) lol

Read other answers
RELEVANCY SCORE 45.6

So I frequently get the event viewer message
"The following boot-start or system-start driver(s) did not load: dam"
Well, DAM I say!
What is dam, and does anyone care?
By the way, in other Windows, I like to keep my desktop quiet and calm. I don't recall knowing how to do that in 10, but maybe I made it too quiet some months back?
What do you think?

Read other answers
RELEVANCY SCORE 43.6

I have a problem with my ThinkCentre E72 (Windows 8). Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP. Only thing that is plugged in my computer is mouse, keyboard and monitor. Many thanks,Matija 

A:E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

In case anyone else is affected by this, please have a look at my post in Kernel-pnp (PLEASE HELP). Best regards // ThinkErEr





ThinkCentre M900 Tiny, i7, 16GB, Samsung 950 PRO M.2 NVMe 512GB

Read other 1 answers
RELEVANCY SCORE 43.6

Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu
9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were
"check if your hd is listen in bios".So, it IS listed in bios but I can't reinstall windows nor access it, any suggestions?

A:No drivers found. click load driver to provide a mass storage driver f

Nevermind, I sent my laptop to a technician and he told me I burnt the hard drive by destroying some cables while cleaning with compressed air.

Read other 1 answers
RELEVANCY SCORE 43.6

My Windows 7 64 bit desktop is several years old. The other day, without warning, both my CD drives stopped working. I discovered the error above (in title). First, I simply attempted to have Windows update the drivers (both from the PC and from the Web).
The response I received was that the drivers were up to date. Next, I did a system restore to a point when I knew the CD drives were working - no help. I next attempted to repair Windows from the install CD using a portable CD drive. When I plugged it into
the USB port(s) I got the same error message. I also did an uninstall and let the system search and reinstall - no help. I've been searching for the correct drivers but, so far have been unsuccessful. The drive description is "Optiarc DVD RW AD-7280S
ATA Device". Type = DVD/CD-ROM drives; Manufacturer = Standard CD-ROM drives; Location 1 (Channel 1, Target 1, Lun0). Driver provider - Microsoft; Driver Date - 6/21/2006; Driver version - 6.1.7601.17514; Digital Signer - Microsoft Windows. File version
- 6.1.7600.16385 (win7_rtm.090713-1255) The driver location is (of course) C:\Windows\system32\DRIVERS\cdrom.sys 
Any suggestions will be most welcome. Thanks in advance

Read other answers
RELEVANCY SCORE 43.6

Hi there!
I'm in a desperate need of help.
This is the situation (sorry for my bad English as always...).
Yesterday I left my PC running with a download in progress through MiPony.I told the program MiPony (for the first time) to shut down the PC at the end of the download.Until then the PC had no problem.Before going to bed I checked the PC and I saw that it was offThis morning I turned on the PC and I glimpsed a sign that it was starting a scan (the only letter I saw was I:\) but I could not stop it.The PC is turned on regularly. Only half an hour later I found out that an entire 3TB HDD in 4 partitions had disappearedI did some search and found this error: The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBLOCKDEVICE\0000.I tried to reboot but same situation (no scan and normal situation) but NO drive.I checked the event log (attached) and I see the problem started after 4 different event regarding my network connection (It's a week that I have to reset the modem \ router several times a day)




Event[18423]: Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:05.437
Event ID: 27
Task: N/A
Level: Warning
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Lio-BigBear
Description:
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.


Event[18424]:
Log Name: System
Source: e1iexpress
Date: 2015-12-27T15:04:08.507
Event ID: 32
Task: N/A
Level: Information
Op... Read more

A:The driver \Driver\WUDFRd failed to load for the device ROOT\PARAGONBL

I was just looking in the Device Manager for my drive problem and noticed a new entry called "User-mode block device" containing a device named "Block device mounter" which reports that "This device is working properly" and then:






Device ROOT\PARAGONBLOCKDEVICE\0000 was configured.

Driver Name: oem50.inf
Class Guid: {54F3637B-4777-4F96-970C-6BFA5477B542}
Driver Date: 07/14/2015
Driver Version: 1.0.0.1
Driver Provider: Paragon Software Group
Driver Section: blockmounter
Driver Rank: 0xFF0000
Matching Device Id: WUDF\ParagonBlockDev
Outranked Drivers:
Device Updated: true



and seems to be my error, but I cannot understand.

Read other 0 answers
RELEVANCY SCORE 43.6

My PC (X380 20LH) was unstable and slow. Decided to reset to factory. Downloaded re-install kit, and performed installation. Ran through all Windows updates and Lenovo Vantage updates.  But the event logs shows several error/warnings despite it is a fresh install. Some I have cleared searching online for solution, but some remains. A portion of the remaining warnings is driver load failures remains: The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC3\6&b6813b&0&0000.The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC2\6&d8e60ad&0&0000.The driver \Driver\WudfRd failed to load for the device HID\Vid_8087&Pid_0AC2\6&52b4ff8&0&0000.The driver \Driver\WUDFRd failed to load for the device USB\VID_2CB7&PID_0210&MI_02\6&2db79ea2&2&0002.The driver \Driver\WUDFRd failed to load for the device USB\VID_138A&PID_009D\03048c8924d0.The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0002.The driver \Driver\WUDFRd failed to load for the device ACPI\INT3400\2&daba3ff&2. I have by search seen that VID_138A is the fingerprint reader, and I have downloaded the specific driver from lenovo.com, and installed it. No luck. Warning persist. /Kaare

Read other answers
RELEVANCY SCORE 43.6

Hey, I'm trying to install a new copy of Windows Vista on my desktop. I get this message "NO drives were found.Click load driver to provide a mass storage driver for installai" right after the installation step of "which type of installation do you want?" I select Custom because Upgrade isnt bold so i'm not allowed to click it.

I have a HP Pavilion Slimline s3713w
Sn:3CR847138P
64bit

A:NO drives were found.Click load driver to provide a mass storage driver for installai

Hi -

Is this your system? --> http://h10025.www1.hp.com/ewfrf/wc/s...=3870526#N1740

If link does not work, paste this into web browser address bar -

Code:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3870526#N1740

I don't see XP listed as an OS for it. What OS came pre-installed?

Is the copy of Vista a full retail copy? If so, back up any files you need and wipe the HDD with KillDisk. Then try Vista installation again.

KillDisk --> http://jcgriff2.com/killdisk_imgburn.html

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 43.6

emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found. click load driver to provide a mass storage driver for installation. any healp well be highly appreciated. many thanks!!!
 

A:no drives were found. click load driver to provide a mass storage driver for installa

Is your drive listed in BIOS? It could be a hard drive failure. No drivers should be needed for Windows 7.
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hi all, I have a Dell M1530 XPS and what a nightmare I am having installing Windows 7 on it.
I go to install and get hit by this message
"No Drives were found. Click Load Driver to provide a mass storage driver for installation"
When I click next nothing happens I have the to cancel the installation.

I have tried pressing F2 to bring up the setup menu but do not know what to do from there.
I have had a brand new motherboard fitted from dell and now unsure what model I have now.
Using Belerc Advisor this is what it says about my system, any help would be great:
Processor a
1.67 gigahertz Intel Core2 Duo
64 kilobyte primary memory cache
2048 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded
Drives
247.18 Gigabytes Usable Hard Drive Capacity
146.89 Gigabytes Hard Drive Free Space

TEAC DVD+-RW DVW28SLC ATA Device [CD-ROM drive]

Ricoh MMC Disk Device (247.18 GB) -- drive 1, s/n 0001
 

A:o drives were found. Click load driver to provide a mass storage driver installation

Hi there

Some problems I had and that also BSOD alot was that the hard disc compability mode was set wrongly, if so you would not see the discs.

Check in bios for somwthing like "AHCI" mode and "Compability" mode.

Put it to compability as otherwise special drivers are neededm ones added you can swap this back to get more speed.
Regards

Ambrose...
 

Read other 1 answers
RELEVANCY SCORE 43.6

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this??? I really need help to fix this
Any help is greatly appreciated
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Read other 8 answers
RELEVANCY SCORE 43.6

Hi,

Since the 11/18/2012 event viewer (Event ID 219, Task Category 212) has been posting a warning:

The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN (followed by name of USB device)

It only occurs on start up if I have a USB memory device plugged into a USB port. The USB memory device functions perfectly and the error never occurs when I plug in and out a memory device after boot up.

The error only occurs for memory devices like memory sticks, external USB hard drive does not cause this error.

Checking back to around the 11/18/2012 I see nothing that I have changed/installed that might indicate something that has caused this. No other Windows 7 failures or issues.

Booting a second hard drive with windows 7 on the same system (I have this second installation for testing faults etc), the issue does NOT occur.

From checking forums and searching I have found a few others with this issue and a few articles on its cause

WUDFRd failed to load for the device

Event ID 219 is logged after you install Windows 7 or Windows Server 2008 R2

I was just curious as to why it would suddenly start occurring after a particular date when as far as I can tell I have not made any changes to anything around this date.

Also I wondered if there was a fix to stop this, other than removing a memory stick before boot up!

Any thoughts?

A:The driver \Driver\WUDFRd failed to load for the device... error

I just started getting this exact same error message logged in Event Viewer when I plug a USB stick into a USB port. It happens with two different sticks from two different manufactures, but it does not happen every time I plug them in. It seems that it may mostly happen the first time I plug a stick in after I have booted up my PC.

Have you been able to find a solution to get these error codes to stop logging?

Read other 9 answers
RELEVANCY SCORE 43.6

I was looking at my system logs today and found an error that is being repeated quite a lot and I would like to get rid of the darned error.

The error in the applications event loge is TrueVector Service, event 5003. The message in the event says:

TrueVector driver: Driver install or load failure: LoadNTDeviceDriver. Win32 error: The system cannot find the file specified.

I checked on the Internet and have found numerous resources indicating that TrueVector is a part of zone alarm. The weird part is that I have never had zone alarm or any other firewall installed -- Note even Microsft's within XP SP2. I have no references to Zone Alarm in my registry. My references to TrueVetor are in My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application\TrueVector Service

Can someone suggest any soluton to getting rid of this event?
 

A:Solved: TrueVector driver: Driver install or load failure

Read other 13 answers
RELEVANCY SCORE 43.6

This has been a problem for over a year now. 140+ identical PCs running identical images, with identical keyboards. Some have the problem, some do not, and it's incredibly unpredictable.

PCs are HP Compaq Elite 8300 SFF running Windows 7 x64 Professional.

People will be working at their PC, hear the USB disconnect sound, and their keyboard will become unusable for 30+ seconds.

An Event with ID 219 is created in the Event Log:

Log Name: System
Source: Microsoft-Windows-Kernel-PnP
Date: 2014-03-31T16:15:30.226
Event ID: 219
Task: N/A
Level: Warning
Opcode: Info
Keyword: N/A
User: xxxxx
User Name: NT AUTHORITY\SYSTEM
Computer: xxxxx
Description:
The driver \Driver\kbdhid failed to load for the device HID\VID_03F0&PID_0324\7&3c64d09&0&0000.

For those affected, the frequency of the error runs anywhere from 10 times a day to once every few weeks.

Re-imaging the PC has no effect but that same image running on another PC with the same hardware can run without ever experiencing the problem. The system I use has not experienced the problem once in over a year.

I have rebuilt the image from scratch and pushed it out to a group of people experiencing the error. It seemed to resolve it for a few months and then the errors inexplicably came back. I've tried replacing the keyboards with completely different models. Again, it seemed to resolve it for a while and then it came back.

Moving the keyboard to different physical ports has no ef... Read more

A:Out of ideas - The driver \Driver\kbdhid failed to load for the device

I know this may sound simple; but have you tried completely uninstalling the keyboard from device manager; then let windows reinstall it? That may fix the issue. If not then post back.

Read other 4 answers
RELEVANCY SCORE 43.6

Hi
i have a couple of weeks ago installed windows and i just got bsod crash and this was the only error in the event viewer
The driver \Driver\WUDFRd failed to load for the device WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_GENERIC&PROD_USB_CF_READER&REV_1. 01#18E3312D81B&1#.

after looking at the minidump i thought it was due to a usb vidio/audio capture device so i tried updating the drivers and windows update couldnt find any and i cant find any online.

could some one help me and check my dump file to see if im right.
thanks

A:The driver \Driver\WUDFRd failed to load for the device error

Hi bftdsh.

A stray crash dump is not enough. Click on the button below ....



It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

Read other 9 answers
RELEVANCY SCORE 43.6

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) <-- This god for shaken message is stopping me from enjoying my computer.

The driver is MAT****A DVD-RAM UJ-861H ATA Device

And that up there is the error message, i havnt downloaded anything i just pressed the button on the cd/dvd drive and my computer shut down and when i turned it back on nothing it it worked.

Does anyone know how to fix this? Im practilly computer illiterate so please be easy on the big words and stuff =]

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Please try the steps below:

1. Uninstall all third-party burning software, such as Nero and Roxio.

2. Perform a Clean Boot to test the result.

Clean Boot

========
a. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.


Note: Please click Continue if the "User Account Control" window pops up.


b. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
c. Click the "Startup" tab, click "Disable All" and click "OK".
d. Restart the computer and test the issue.


Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".

Please test this issue in the Clean Boot environment. If the issue disappears, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.

If the issue persists, please contact your computer manufacturer to check if the DVD drive is damaged.

If not, you may need to restore the system to its factory settings.

Hope it helps.

Read other 2 answers
RELEVANCY SCORE 43.6

In My Device Manager appears a exclamation mark next to the SCSI/RAID Host Controller

LIKE THIS

AND WHEN I CLICK IN PROPERTIES APPEARS THIS
I ALREADY CLICK IN TROUBLESHOOT
AND ONLY THIS APPEARS

How can I fix this???
Any help is greatly appreciated
 

Read other answers
RELEVANCY SCORE 43.6

Updated Windows and after reboot got the message:A drive cannot load on this device:Intel Graphics Kernel Mode Driver   Message shown on Intel driver update:"A customized computer manufacturer driver is installed on your computer. The Intel Driver & Support Assistant is not able to update the driver. Installing a generic Intel driver instead of the customized computer manufacturer driver may cause technical issues. Contact Lenovo for the latest driver for your computer." So I did download latest, but it is still quite old.Driver version: 20.19.15.5058Release date: 09 Nov 2018However in this package the real driver verstion seems to be: 15.40.41.64.5058 On Intel site generic driver seems to be a newer:Date: 03/19/2019 Version: 15.40.42.5063 (Latest) There might be some changes in driver loading that was made strickter in latest windows updates. Currently there is no 3d graphics support in windows due to Lenovo not updating the driver.

Read other answers
RELEVANCY SCORE 43.6

Hello everyone, I'm new here and after searching without finding i am asking for your help.
I have just updated from Me to Xp update install,all is working fine except the sound card drivers won't load and in the device manager it says
'Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)'.next to my 'Creative Audigy Audio Processor(WDM)
My system is:

a7v8x-x asus MB
amd sempron 2500+ socket A processor
audigy platinum ex
512 MB RAM
I have updated the MB and the Processer Bios,I have installed sp2for XP,
I have tried to follow 'instructions' from Creative Support etc.
I really need some advice.
Thanks
Kurt
 

A:Windows cannot load the device driver for this hardware. The driver may be corrupted

Go to the sound card makers web site and DN the latest XP drivers.
 

Read other 1 answers
RELEVANCY SCORE 43.6

Please help me. For both of my cd/dvd rom drives I get the following error: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click Troubleshoot to start the troubleshooter for this device. How can I fix this?

Any help is greatly appreciated,

thisismyuser
 

A:Solved: Windows cannot load the device driver for this hardware. The driver may be co

Read other 16 answers
RELEVANCY SCORE 43.2

I have this problem:
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

and now I am not able to connect any usb device to my laptop making it virtually impossible to use windows 10.
How do I downgrade to windows 7,have enough of the beta testing.
I even have a purchased version of windows 10 pro which I really regret buying, worst investment ever.

Read other answers
RELEVANCY SCORE 43.2

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8103 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1988 Mb
Hard Drives: C: Total - 476837 MB, Free - 271044 MB;
Motherboard: ASRock, Z68 Extreme3 Gen3
Antivirus: AVG Internet Security 2014, Updated and Enabled
-----------------
Problem:
My Windows 7 Professional "Explorer" tree (not Internet Explorer) no longer lists my CD/DVD ROM DRIVE under the Device Manager/Drives. It used to.

I've checked the System Registry and it has lots of info about that ATAPI drive, but my system fails to find the "cdrom" driver (which is the one Windows 7 uses by default). It's not a 3rd-party driver.

The tray on my CD/DVD drive opens and closes properly. Windows just won't recognize the drive, so I can't use it.

I'm hoping someone can offer a 'manual' solution to get it working again. I do not want to spend a month to reinstall my OS and tons of hard-to-configure software. I've read countless other posts and solutions, both here and on MS's sites. The info on MS's sites is not even understandable. It's too vague and often doesn't even apply to my situation.

Note: The error (7026) message is:
"The following boot-start or system-start driver(s) failed to load:
cdrom"

-----... Read more

A:Error 7026 "The following boot-start or system-start driver(s) failed to load: cdrom"

Read other 8 answers
RELEVANCY SCORE 43.2

I'm getting this error once a day, where my computer crashes, and the only way to turn it off is to reset it and turn off my charger so I can turn it on again. What can I do?

A:The driver \Driver\WUDFRd failed to load for the device

anyone?

Read other 1 answers