Over 1 million tech questions and answers.

Apple Mobile Device USB Driver is hidden in Device Manager.

Q: Apple Mobile Device USB Driver is hidden in Device Manager.

Currently cannot get my laptop (Windows 10) to recognise my iPhone (XS). I have tried absolutely everything but after second download of USB files and numerous iTunes re-downloads, they become hidden and greyed out under Device Manager. I have updated
drivers but remain greyed out/hidden. Windows & IOS are up-to-date. Phone works perfectly fine on old laptop so I know it's not the phone and the connectors. Grateful for advice that's more than the basic Apple advice. Many thanks.

Read other answers
Preferred Solution: Apple Mobile Device USB Driver is hidden in Device Manager.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)


Basically I jailbroke my iphone 4 for the second time after restoring it yesterday, but then something went wrong with it and it stayed on the apple logo for ages so I restored it again today. The restore seemed to go fine and all my stuff went back onto the phone but I want to jailbreak again and my computer isn't recognising my phone!

When I plug my phone into my laptop it charges, and itunes syncs with it but under itunes 7.1.2 in the device summary it says 'please connect this iphone using a USB etc.' so I think it may be syncing over wifi because I have that enabled.

When I go to computer the phone isn't there and so I have reinstalled itunes, restarted the laptop, updated the laptop and checked device manager. The Apple Mobile device USB driver isn't there under Universal Serial Bus Controllers although Apple Mobile Device support is in my installed programs. Also the iphone isn't showing up anywhere, not even as a camera. I tried updating the driver software of USB composite device with the usbaapl file but it said 'installing this driver is not recommended...may not be compatible etc' and then I get Code 10 with the Apple Mobile Device USB driver appearing but with a yellow ! and it doesn't work.

No idea where to go from here please help!!!

Read other answers


My Iphone 5 is no more recognized by my Toshiba because the Apple Mobile Device usb driver is damaged.
So i cannot synchronise it with iTunes.

I would like to download from the Toshiba site the required driver. Can you help me ?

A:Satellite P300 - Apple Mobile Device usb driver

Toshiba does not provide USB 2.0 driver because this driver is part of the Windows system.

I guess you would need to reinstall the whole Apple software to fix your issue

Read other 4 answers

will there be any problem for my iPhone, if i remove apple mobile device usb driver ?

A:Problem related with apple mobile device usb driver

Hi abtahi and welcome to Seven Forums.

Normally what will happen is when you remove them, then reconnect your phone it will automatically reinstall them.

Read other 1 answers

I have a Toshiba laptop, model L505-ES5018. I had Windows 7 Home Premium 64 bit installed on here, but decided to reformat my hard drive using Windows 7 Ultimate 64 bit. After the reformat was finished, I ran Windows Update and it found several items to download and install for me. I noticed that it also found optional items to download and install for me, so after all the important updates installed, I ran the optional updates. After all of this installed, I checked Device Manager to see if there were any errors and I found nothing. I assumed everything was fine. I decided to check Devices and Printers and under my laptop icon, there was a yellow icon with an exclamation point on it. I decided to run the troubleshooting option when I right-clicked the icon....it gave me a solution to download a Toshiba password utility program, so I did that and nothing happened, even after restart. Same icon appeared. When I clicked on the icon a second time, I noticed that the model of my computer at the bottom of this window, changed from L505 to TIAS. I have no idea what this is. I decided to do another reformat on my hard drive. This time, I ignored the optional updates. I checked Devices and Printers again, the same icon appeared but the model of my computer said L505, like it should. There is something in the optional updates that is changing this. Could it be the Intel chipset driver that the optional update is pushing? I'm not sure. I went back to Device Manager, th... Read more

A:Unknown Device in Device Manager/Show Hidden Devices

Hi there ... You should Install the chipset Driver and also the Realtek Driver for your card Reader ... From the Toshiba website ... The Link is provided below

Satellite L505-ES5018 – Windows 7 32 and 64-bit Drivers Download

Read other 2 answers

Is this needed for my iPod Touch to work? It's taking up about 60 MB ... And I hate bundled software too.
Also, can I still update Quick Time and iTunes without Apple Software Update?

Read other answers

I'm trying to stop this service from running at start up. I have it unchecked in msconfig but it still is always running unless I manually stop it in the task manager. How do I fix this?

A:How do i stop apple mobile device service

Hello again.. have you checked in Control Panel, Admin Tools, open up Services and tried disabling it ? Pay attention if other service are sharing it . If it is there, you can right click, properties and select in the drop down to disable it. then press apply, then ok. see if this solves this issue. Note: you can always change this service back to Auto, Auto Delay, or manual also. Post back results please.

Read other 3 answers

I am using windows 10 and i think that when i upgraded to windows 10 that is when this problem started.when i go to apple mobile device service in windows and click on it it shows that the service is stopped. when i click it start it says the apple mobile device service on local computer started and then stopped. some services stop automatically if they are not in use by other servecics or programs. the startup type is set to automatic. can someone please help me to fix this?

Read other answers

Hi everyone,
Well, I have installed Itunes version on my computer(windows7 x86), and since that Itunes refuses to sync to my Iphone. On the previous versions of Itunes everything was just fine.......but now it's making my life a living hell
I went to the Service pannel and when trying to start the AMDS and I keep gettng this error "Windows could not start the apple device service on local computer : Error1067"......I've googled the matter and seems like no one on the blogs I visited got this figured out.........Apple support is even worse,they keep telling you to install and the uninstall itunes, delete temp filesetc and try the whole thing back again.......
So, I was wondering if there was anyone out here that got this figured out...Any help would be much appreciated,


A:Apple Mobile Device Service is not started

hi there
i don't use apple much but i found this for you

Uninstall your current Apple Mobile Support JUST THIS NOT ITUNES!
Download the version of iTunes off of FileHippo.com - Download Free Software
Then Use 7-Zip http://download.cnet.com/7-Zip/3000-...-10045185.html to "View Archive"
Install the Apple Mobile Support in there.
Restart Computer


Read other 9 answers


im currently running my computer in safe mode but whenever i connect my iphone, it says that it cannot sync because the apple mobile device service cannot be started? Is there a way around this?


A:Apple Mobile Device Services [safe mode]

Do you have the Apple Application Support installed? If this is not installed you will not be able to sync your iphone. Here is the link http://www.apple.com/downloads/. BTW, why are you running your computer in safe mode?

Read other 1 answers

After installing iTuns 11, I am unable to connect my iPods in iTunes. When reinstalling, I get the message that I might not have privileges for the Apple Mobile Device. I am an Administrator account. I go to services and I can't find the Apple Mobile Servuces in the list so I can't do the common fix for this problem. I have talked with advanced somputer support people and Apple directly and nobody can explain or fix the fast that I do not have the Apple Mobile Services at all. Does anyone have an idea on how to fix this? I have spent other a week and maybe 36 hours on the phone (literally) with support people. Pleass help!

Read other answers

For a few months, I've been getting the error message that my Apple Mobile Device Support bin is corrupted and to run chkdsk. However, when I hit schedule chkdsk, it does not run at restart. I have administrator status. I got a new iPod and I uninstalled iTunes because it would not let me update the iPod or put music on it. The problem with the mobile device support is coming up under Program Files/Common Files/Apple /Mobile Device Support.. It will not let me install because it cannot write to the bin file AOSUtils.dll and says "Verify that you have access to that directory." When I try manually delete the folder, I get Error 0x80070091: The directory is not empty.

The bin file is Corrupted/unreadable.


Read other answers

The AUDIO FADE PROBLEM is an issue with this laptop and I am wondering if it is related to the above.
I have upgraded to the latest BIOS and drivers using the Dell Product Support pages.
Every other day I have to reinstall the Realtek Audio Device to get audio from streaming media.
The current Driver Version is from Realtek Semiconductor Corp. Date 12/08/2016 which is what it defaults to upon reinstall.
I suspect that for whatever reason Dell has not yet come up with a fix. Has it something to do with the fact that although I bought the laptop new, it had been upgraded from Windows 8 to 10? (A fact that I only discovered later)

A:Inspiron 13 5368 2-in-1 High Definition Audio Device in Device Manager - no available driver

There are a couple of suggestions about the fading issue in the Recent Issues FAQ, under Inspiron 5368.

Read other 1 answers

On my X1 Extreme (20MF000CUS) I recently noticed that when I open the Windows 10 Device Manager the list of devices keeps refreshing, like a new hardware scan is being forced every 2-3 seconds. I started disabling all the devices one by one and I finally narrowed down the culprit: USB Connect Managers -> UCM-UCSI ACPI Device  (Hardware Id: ACPI\VEN_USB&DEV_C000) This device, when active, keeps appearing and disappearing from the device manager tree forcing a refresh every few seconds.And it only happens when my Lenovo Thunderbolt Dock (40AN0230US) is connected. When I disconnect the dock the driver stops disappearing and becomes stable. Opening the driver Properties -> Details I get: Status: 01802400 (DN_HAS_PROBLEM)Problem code: 00000016 Any idea what is going on?  

Read other answers

My integrated speakers and audio port do not seem to be working. It happened after I was playing around with bluetooth trying to get that to work. Now only bluetooth is able to connect. 
So far I have tried:
System restore
Deleting and redownloading audio drivers
Adding legacy hardware for Realtek
ePSA test was able to hear the tones
The audio logo has a red X through it and only the bluetooth headphones drivers appear in device manager. Any ideas what might be the issue and how to solve them? 

Read other answers

Does anyone know what driver the Digital Microphone Device would use on the M920q Tiny.  I have installed a Windows 10 1809 image using MDT with the SCCM driver pack but Device Manager shows Digital Microphone Device not installed and I can't find a driver. Anyone else had an issue with this or know which driver, the driver on Lenovo site errors on install. Many thanks 

Read other answers

Not sure which forum category I should use, thus using software (for Driver Problems).  Various times to fix a device you can go into Device Manager  and uninstall the driver, go to top of page click on Actions and click on Search For New Devices.  I am under the impression this will uninstall the device driver, then reinstall the exact same driver (code).  Why does this work?  It appears that the exact same code is now reinstalled and many times fixes a problem.  I have used this technique on mouse driver, internet driver, keyboard driver.  THis is a good and easy first process to try and make a quick fix.
Again, I am just trying to figure out why it works - I know I am missing something.  As an ex-programmer trying to figure out why the same code now will work when it had stopped working.
Why or under what circumstances does the driver code stop working, and then why does a reinstall of it at times lets it start working again.

A:Why Does Uninstall / Reinstall a Device Driver via Device Manager Fix Problems

The drivers can become corrupted, which is why a re-install will fix the problems.As to how they get corrupted, that's anyone's guess...

Read other 1 answers

I have often wondered if this is the way to go to update a driver VIA device manager.
Don't select install automatically instead select "Don't search I will choose
the driver to install. Usually one is found but when selecting "install automatically
I have never had an updated driver found.

A:Updating device driver through Device Manager

usually if I don't have the disk, I just go to http://www.pcidatabase.com/ and find it there...about the only time that site has let me down was an ancient dell lapper with some archaic sound driver.

Read other 3 answers

I have a new PC which is a 64bit system and is running Windows 7. I have installed Mobile Device Manager to connect to my phone. The connection to my phone has been successful, but it won't update Microsoft outlook. It tells me to make 'outlook your default email'.
I have Microsoft Outlook 2000 (because that is what I had previously!) and each time I open it, it asks me if I want to make it the default email manager, and I click 'yes' - then it asks again and click 'yes'. But it clearly fails.
I've tried going into 'Default Programmes' but Outlook is not even listed. I've tried 'repairing' Outlook and that hasn't worked. Any ideas please?

A:Outlook and Mobile Device Manager Compatibility?

There is a very long thread here - well worth reading through to the end:
Outlook 2010 64 bit Default email client

Hope you find something in there to help you.

Read other 1 answers

I am unable to install iTunes on Windows 7 on a Dell Optiplex 780. It always errors out as "apple mobile device service failed to start" and then installation always rolls back. One result told me to remove all apple software on my computer, but I do not have any apple software installed, it always fails to install. a few websites mentioned to make sure that my iPod is not plugged into the computer when installing, I unplugged it, it made no difference. and there were websites telling me to just manually start the service, but every time I try I get a "unable to start service. the service did not respond to the start or control request in a timely fashion" which pops up immediately. I also tried doing an SFC /scannow but it says "there are no integrity violations"

I am at a loss here. I even tried various alternatives to iTunes which all give errors of their own

Any ideas?

A:"apple mobile device service failed to start"

Hello mate now I don't have a an answer but my partner has a very similar problem on her laptop - an annoying message t say that Apple Push has stopped.

It did get a little better by running these
SFC /SCANNOW Command - System File Checker
Disk Check < if necessary include the /f and /r in the command line as per Option2 by better I mean it got less frequent.

To be honest I am not an Apple fan and it seems to me it clutters everything up

Read other 1 answers

I am having trouble getting my vodaphone dongle for internet access on the road installed. My PC refuses to install the drivers properly. It worked fine but it has been about 9 months since I last used it. I have made sure I have the latest drivers downloaded from vodaphone and when I try the dongle in my sons laptop it installs and works fine. I thought I would uninstall the driver from device manager but when I try to do this it just sits there for hours. I have to end up closing device manager down using task manager. Any help much appreciated. I am running W7 on an HP G62 Notebook

A:Cannot get device manager to uninstall drivers for mobile dongle

Contact vodaphone or HP, sounds like drivers are not compatible. You try installing the drivers that did work with it>

Read other 1 answers

My friend ran SAS on her machine and removed several trogans along with alot of tracking cookies. Her HP laptop running XP then would not get internet. I am looking at it now and all the devices in the device manager are either hidden or removed, most everthing works but the ethernet card. There are no lights on the port when a cable is plugged in. Will the unhide program fix this or do I try something else?

A:hidden device manager items

If there are no lights on the port then its a hardware issue. Their should always be lights, but can you open up a command prompt and type in the following:


Post the output here.

Read other 17 answers

I recently uninstalled a usb logitech headset and tried to put my old analog headset back in and it would not work. I then detected through view on device managers the invisable driver and also uninstalled it. It still will not work and when I do a driver detector scan I still show having

"USB Composite Device - Logitech USB Headset"
"USB Mass Storage Device - U3 Cruzer Micro"

They are under "Unplugged Devices".

I am using a trial version of Driver Detective to find these and don't want to buy it. So I was wondering if these two(for sure the first one) need to be uninstalled before I can hook up another headset how else could I go about uninstalling them? Or would another usb headset just install over them without a problem?

A:Device manager hidden devices.

If you have uninstalled all of those, and;

You don't have anything else from Logitech/Cruzer,
just go to Start->Run->Regedit
then Edit->Find->Find next

Delete everything.


No problem is so huge (in these small spheres) that it couldn't be solved with free software.

So never ever go buy anything unless you area SURE it is exactly what you need.

Read other 1 answers

This is a friends HP laptop running XP. After using Super Anti Spyware and removing some infection the laptop quit getting the internet. Thats when she brought it to me. I discovered right away the missing devices in the device manager as I was trying to repair the aparently disabled ethernet card. BTW the wireless quit working also. I've run SAS sevaeral times and trhen began posting here. following the direction of CryptoDan. After running different things and posting the results I have been refered here. Below you will find the asked for list/logs Thanks Astro.DDS (Ver_2011-08-26.01) - NTFSx86 Internet Explorer: 8.0.6001.18702Run by Amy Lescalleet at 19:32:52 on 2011-09-09Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.511.250 [GMT -4:00]..============== Running Processes ===============.C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\WINDOWS\system32\spoolsv.exesvchost.exeC:\Program Files\SUPERAntiSpyware\SASCORE.EXEC:\PROGRA~1\COMMON~1\AOL\ACS\acsd.exeC:\Program Files\Firebird\Firebird_1_5\bin\fbguard.exeC:\WINDOWS\system32\svchost.exe -k HPServiceC:\WINDOWS\System32\svchost.exe -k HPZ12C:\WINDOWS\System32\nvsvc32.exeC:\WINDOWS\System32\svchost.exe -k HPZ12C:\Program Files\Analog Devices\SoundMAX�... Read more

A:hidden device manager items

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 21 answers

I purchased a mobile broadband module per factory spec for my laptop so I got the lt2522 Novatell broadband module. I did not have a sim yet but wanted to make sure the install and drivers were present and working before I ordered the sim. I installed the module without issue using factory antenna wires already present in the slot marked WWAN, I installed the drivers listed for my laptop on hp website (sp60048 Novatel Mobile Broadband Driver installed without any issues and broadband module showed in device manager as "Enabled and working correctly" under each line of "Modems, Network Adapters, and Ports. I opened HP connection manager and the Module was powered on and it just said "No Sim" So I assumed that the Module install and driver install was completed and functional. I called Verizon and paid to have a Pre-activated Sim mailed to me.  2 days later I got the Sim, inserted it, opened HP connection manager and ever since all I can do is turn the power on and off to the module, but whenever the power is turned on it reads "disabled in device manager" which I know is not true, I have rechecked device manager a dozen times, removed and installed module and driver package multiple times. Even reinstalled module and drivers without Sim and it still says "disabled in device manager". I searched the net and here at HP for solutions/updates/information, and haven't really found anything helpful, just a couple noteworth... Read more

Read other answers

I had an HP 3D Drive Guard error after installing device drivers from Device Manager in Control Panel.  I looked at Google for answers and they said to find the correct driver on HP website, sp71811, uninstall the old driver and install the new one for this notebook.  I did that and got a missing .dll error after rebooting the machine.  I was told to uninstall again and reinstall and to be sure to reboot after the uninstall.  The install stated that it was incomplete that files were not completely installed.  I got an error message about a missing .dll file (don't have the error code now).  Something about a stack file error.  So I went to the device manager and uninstalled the driver for HP mobile data protection thinking that I could reinsall that from device manager but it removed the accelerometer.  Now I cannot unload HP 3D DG because of the missing accelerometer.  How can I get the accelerometer back and fix the original problem with HP 3D DG??  

A:HP Mobile Data Protection Sensor Missing in Device Manager

OK, the mobile data protection sensor came back in the device manager and I updated the driver.  Then I uninstalled the HP 3D Drive Guard and reinstalled the latest version for my notebook again.  I still get a VCRuntime140.dll missing error at start up.  It tells me to reinstall the HP 3D Drive Guard again.  Any advice for how to fix this?  

Read other 2 answers

There are six storage volumes in device manager marked as "unknown device" without yellow icon when selecting "show hidden devices". Few weeks ago I replaced my HDD which had six partitions. Could they be related to these ones? Does it harm my system when I uninstall them in device manager?

Read other answers

There are six storage volumes in device manager marked as "unknown device" without yellow icon when selecting "show hidden devices". Few weeks ago I replaced my HDD which had six partitions. Could they be related to these ones? Does it harm my system when I uninstall them in device manager?

Read other answers


On a fresh clean Windows 8 image, my software driver (signed) installs fine and shows up properly in the Device Manager. However once i uninstall it , subsequent reinstalls show up as 'Unknown Device' in the Device Manager.

From the device details, I find that it refers to /looks for the .inf file in c:\windows\inf folder but the file itself is missing from the location. The FileRepository has all the required files. But trying to update from there also fails.

Could anyone help me with troubleshooting this problem. What could be going wrong.


A:Device manager shows "Unknown Device" on reinstallation of driver

Please fill your system specs to get help efficiently.
What is your computer make/model?

Read other 1 answers

Hi everyone,I am new to your site and need your help.I have a Dell Inspiron 1501 laptop, using XP with service pack 3 update.I just formated my hard drive and re-installed everything except my personal stuff. Now have installed Norton (all), Office 2000, Acitve X and Adobe. All drivers have been updated through Dell although I had to manually install because past one year now. Pretty sure their ok.WLAN Miniport is 1390 Dell and only appears in Device Manager when "Show Hidden Devices" and does not show in "Network Connections" or in task pane. Lan is Broadcom 440x 10/100 Integrated Controller...this seems fine!I have searched everywhere for an answer as to why this is 'hidden'? I have tried everything including disabling Norton/Symantec on this device.In the device manager, when I show details for device, it says it's working fine, made by Microsoft and...location unknown?I just tried something else.... Network Diagnostics for XP, as follows:HTTP, HTTPS, FTP connectivity info HTTP: Successfully connected to www.microsoft.com. info HTTPS: Successfully connected to www.microsoft.com. warn FTP (Passive): Error 12002 connecting to ftp.microsoft.com: The operation timed out warn FTP (Active): Error 12002 connecting to ftp.microsoft.com: The operation timed out error Could not make an FTP connection. I have spent soooooo many hours trying to fix this damn thing.I think it is a software conflict but not sure. Would really appreciate some help on... Read more

A:Wireless LAN hidden in Device Manager and Network Connections

This link explains what hidden devices might be, http://oreilly.com/pub/h/3105Louis

Read other 7 answers

Hi. I tryed to make a system back up but it keeps failing with error code0x80070002) (windows cant find a backup device) went into disk manager and found that my external hard drive that I had plugged in to make the backup on was present and working fine, the strange thing was that i couldnt see my internal hard drive, I did the command promt "devmgr_show_nonpresent_devices=1" this enabled me to see the disk in device maneger but windows was telling me that the disk was not connected to the system? system restore wont work and like a fool i deleated my previous backup image to make room for the new one. I also tryed startup repair and this failed to find any errors, I should point out though that windows explorer shows my internal hard drive, which is the drive my OS is running from but disk manager refuses to show it and i dont get a "show hidden devices" in the view tab either. I also have XP installed on a different partition to run some old stuff i like to use and the disk manager in xp is also hiding my hard drive. any ideas??

A:Hard drive hidden in disk/device manager

So which OS do you have Vista or 7? You cannot have both so you should not be in 2 forums.

Read other 1 answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4043 Mb
Graphics Card: Intel(R) HD Graphics Family, 1797 Mb
Hard Drives: C: Total - 599278 MB, Free - 556127 MB;
Motherboard: Sony Corporation, VAIO
Antivirus: Norton 360 Premier Edition, Updated and Enabled

After going through and running a diagnostic report after I encountered a code 10 error message with my Microsoft Teredo Tunneling Adapter software and fixing it. Once I fixed the issue with the Tunneling Adapter this error message under Non Plug and Play Drivers popped up. Should I just uninstall it? This is the message that it is showing me: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24). What can I do to fix it. I am currently running a scan with my Norton Antivirus Software and am going to see if it goes away, otherwise, what are my options?

Read other answers

Hi folks,

I am attaching a screenshot of entries in Device Manager 'Show Hidden Devices' that have yellow exclamation marks on them.
Their properties say "This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)"

I recently uninstalled my Iomega 100 zip drive as I haven't used it for years and I'm wondering if these are left-overs from that. I can't think of anything else I've done to cause them. Can anyone help please?

A:Errors in Device Manager ('Show Hidden Devices')

Read other 16 answers

We are using the Microsoft "Windows Device Portal" REST API to do mobile app side-loading.
Everything in the REST API is working for us except for the "uninstall app" which is a "http rest delete" call.
So, to troubleshoot, I thought I would use Microsoft "Message Analyzer" to see if we could see the http traffic coming to and from the workstation to the mobile device over the USB.
I didn't want to install the Fiddler .net library and it looks like if you are on W10, then you can use the Microsoft-Windows-WinINet-Capture provider.
My steps:
0. Start "Microsoft Message Analyzer" in admin mode
1. click "New Session"
2. click "LiveTrace" button
3. Add providers: 
    a. Microsoft-Windows-WinINet
    b. Microsoft-Windows-WinINet-Capture
4. put *IPAddr == as a filter
5. click Start button
At the top, I get an error icon saying "Modules Loaded  Errors or warnings were found when loading modules."
When I look at the log, these are the errors:
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEtwProcess\TCPIPComponentExt.opn(175,8-175,22):  undeclared 'LocalAddress'
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEtwProcess\TCPIPComponentExt.opn(177,28-177,42):  undeclared 'LocalAddress'
8/29/2017 11:50:03 AM Error MessageAnalyzer\OPNAndConfiguration\OpnForEtw\OpnForEt... Read more

Read other answers

So here?s a stressful situation.
I?ve been having this issue with both iOS and Android, where sometimes when I upload a photo to an image service or social media (Instagram, Ello, Facebook, etc.) The photo appears to be uploaded completely normally, but after I come back to it, say 10 minutes later, there is a visible distortion or glitching on the picture, as if the data stream was interrupted or intercepted and whoever was doing the interception didn?t properly reconfigure the data upon exit so the picture ended up having a visual artifact or glitch upon it. I?m not sure what this is, or why it?s happening, but it?s even happened on my digital camera sometimes, (after transferring the DCIM files to my pc, and then cellphone of course.) They appear normal on PC, normal on the phone, but when they are uploaded, they are either IMMEDIATELY glitched near the bottom half or top half of the screen, or after a certain amount of time, it just shows up. I would love it if anyone had any experience with this or knew what the issue was, because it isn?t as consistent as a ?connector cable? error or any of that, it?s more random and only happened on a photo or two. I would attach a picture, but upon noticing this happen again I immediately uninstalled and deactivated those accounts for fear someone may have been snooping in or perhaps intercepting my data, ( causing concerns towards banking, emails, etc. )

Read other answers

We have some symbol windows mobile-based handheld devices that we use in our business.  We connect these devices to our computers to copy files to.  This all worked fine until recently the devices come up as failed.
It appears in device manager with a yellow exclamation point.
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.  (Code 19)
I've tried all the solutions I can find on the web and none of them work.
Uninstall the device in device manager and scan for changes.  It downloads the driver from windows-update and returns to code 19.
Tried hardware troubleshooter which basically seems to automate the process of uninstalling and scanning.
I've tried removing windows media player 12 feature and adding it back.
I've tried deleting USB controllers from Device Manager and rebooting, it re-detects them all and still gets code 19 on the device.
I've tried deleting upper and lower filter values in the registry which I found out later is mainly for CD/DVD devices, that didn't fix anything.
I've tried removing and re-installing Windows Mobile Device Center and driver pack and that did not fix it either.
Additionally Canon Powershot camera gives us similar results.  MTP USB Device failed.  
This is so far happening on 3 of our workstations that we know of.
At first we thought it was due to windows updates but nothing recent has been installed that looks rela... Read more

A:SOLVED:Windows Mobile-based device and Canon Powershot cameras showing code 19 and MTP USB Device failed.



Thanks for posting in Microsoft TechNet forums.


Do you have Kaspersky installed? Kaspersky Filter driver caused that any USB device could not connect.


It is suggested to have a look at the following registry. Make a backup of it and remove the Upperfilters setting:


“Upperfilters” = klfltdrv


If the issue persists, please find a working machine and compare the registry settings.


Best Regards

Magon Liu

TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]

Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 13 answers

I have recently bought Samsung galaxy S5 device. When I tried to connect it to my computer I nothing happend (what should have happen is that it will pop up the "What do you want to do? Go to folder/..." menu).
So I tried another usb socket. still the same problem. I have Ubunto install as a sperate OS on my computer, and there everything is working fine - so the problem is not in the cable/USB on my computer.

I went to Device manager and under "Portable devices" I see the "SAMSUNG Mobile MTP Device" icon with a yellow mark. I open it and I see "this device is not working properly because windows cannot load the drivers required for this device. (code 31)". I also have "SAMSUNG Mobile USB Modem" under modem in device manager (but it says that this device is working properly).
I tried to remove the "SAMSUNG Mobile MTP Device" and double click it and choose "update driver"->"search online". It found the driver but was unable to install it (got a "access deined" screen).

**This is not a problem of registry "UpperFilter"/"LowerFilter" problem. I saw it online while I was google a soultion and this is not my case***

I also tried to install the driver by installing "samsung KIES". It didn't help.

When I connect the decive and go to Windows Update -> a new update for samsung mobile is showing but when I choose it and click update it fails e... Read more

A:samsung mobile mtp device failed to load driver

I don't know the answer to this, but I see you've had many views and no replies.
I'm sure that you've googled this and it isn't to patronize you, but here are a couple things I've found that MAY help.

Possible Solution 1:
"Access Denied" Message During USB Device Installation - National Instruments

Possible Solution 2:
When installing the driver(s),

Even though you allowed admin in your user profle and allowed it to run in admin, this does not give you full control for all users. Do the following below. Then, Logoff, login with the new admin owner. Only the owner of this pc has full user rights.
Its worth a shot

How to enable the hiding admin account for login
1- In the run type: secpol.msc
2- Find and click on, Local Policies,security options,
3- Over to the Right in the policy setting, (accounts: Administrators account status) Enable
Close tht and got to
1- Run, lusrmgr.msc
2- Create a new user, or use Administrater, Built-in account for administering.
3- Right click, Properties
4- Uncheck, Account is disabled
If you chose you can change the name and add a password, now when you log off you can have the options to log in as admin, owner of this pc and have controll over all users. its better to have th admin login the the below

Or this but sometimes this method has failed and sometimes not

net user administrator /active:yes ,you have admin until reboot, or you go no.

Read other 9 answers

I cannot find the Ports section in device manager and I have selected the 'show hidden devices' button

Read other answers

Hi everybody !

I'm a new *Satellite X200-25A* owner.

I've just finished installing Windows XP Professional (32-bit) on my new X200-25A.
I've installed succesfully EVERY Driver found on the Official Toshiba Site for WinXP,
and everything seems to work fine.

Just a question :

When I open Windows Device Manager, and choose to see also all Hidden Devices,
I see there is still something without driver support :

1. An unknown Non-Plug & Play Device.
The only piece of information about this is : *ACPI/CPL0001/2&DABA3FF&0*

2. A Non-Plug & Play Driver called "Serial".
The only piece of information about this is : *Serial ROOT\LEGACY_SERIAL\0000*

Please someone tell how I could fix this problem.

Thanks by now to all community !

A:Satellite X200-25A - Need ACPI Driver For Hidden Device

Can't believe there's no answer. So difficult ?

At least, is there a support mail I could use to
contact someone from Toshiba and ask for this simple problem ?

I mean an "official" support mail for questions like mine...

Thanks, however...

Read other 4 answers

I have been having an issue with my flash drive being recognized by my laptop computer. When I initially start up my computer, it reads my flash drive. If I take out my flash drive and reinsert it, it no longer reads it. (It still makes the sound the the
computer recognizes it was inserted, but it won't open the drive.) When I go into device manger, it has that yellow exclamation point with this message, "Windows cannot load the device driver for this hardware because a previous instance of the device
driver is still in memory. (Code 38)". My cordless mouse has been working just fine.
I did troubleshooting and it told me to restart the computer. That helps for the first time, but then when I reinsert the flash drive , the problem happens again.  
I tried to uninstall the hubs and reinstall but that also doesn't seem to be helping.
Any ideas?


Read other answers

Dell Vostro 1400, Core2Duo. Installed Windows 7 64 bit a year and a half ago. For those not familiar, the Vostro is not entirely compatible with 64 bit, so the drivers are a little hit and miss.

Computer runs slow sometimes, has since the install. I don't think I've ever seen the yellow triangles before, but I may have never looked at the device manager ... the computer is a secondary machine in the house.

My question is, do these indicate a performance problem or can I ignore them and assume the computer is working as best it can?

A:Base system device, core processors yellow triangle in device manager

please check out this webpage. it may help you to get started: Device Manager - yellow exclamation point

The yellow icons showing an exclamation point can indicate missing or improper drivers. The system does not seem to recognizing your hardware. Hope this gets you started.


Read other 8 answers

I'm trying to fix an hp pavillion dv6704nr laptop running windows vista home premium. It has the little red x on the speaker in the lower right hand corner. The owner said it has been there for some months. I have tried downloading the current audio drivers for the computer but every time I try to install the driver, I get an error that says the device couldn't be found.

The first time i restarted the computer, after the driver installation failed, the audio came back and worked fine, until I had to restart the computer. Now I keep getting the same error and nothing i have found so far online has helped.

There are no yellow triangles in the device manager and the device list isn't showing the category for "sound, video and gaming etc." at all.

Please help. I did a search but the other threads didn't solve this problem for me.
Thanks in advance.

A:No audio device installed error and devices wont show in Device Manager

I see three different audio driver packages at http://h10025.www1.hp.com/ewfrf/wc/softwar...ct=3646926#N661.You need to find the right one to install. If you install one and the system doesn't work properly...please uninstall it before trying the next one.Installing the wrong one won't do anything harmful to your system...it just won't do any good to leave it installed.Louis

Read other 4 answers

Hi Malware Specialist!

I started out in the "Am I infected?" Forum and a junior specialist sent me here to get further help, here is the link to the 4 logs I ran for him:

For several days I have been trying to complete the preliminary steps required by this forum, I can not back up to windows/microsoft program (Backup Configuration not valid 0X8100029), but hopefully the two other programs I used were successful, namely cobaine and driveimage. At the end of the driveimage session, it frozen and there was "Globalroot\device" followed by various endings. Then it completed and said finished. Also it went to blue screen the firsttime I tried to run GMER and rebooted.

The main problems of slow programs from startup, no devices in device manager, no audio device and no printing capability began after I ran some kids software games that kinda of frozen the computer, although I believe whatever is making my computer upset has been there for awhile and may have something to do with remnants of roxio 2009 and other shared folders. In services it says "Configuration Manager machine selected for remote communication is not available at this time."

Reliablity Performance Monitor stated failed system services: audio srv, EMDMGmt, Mccicm service, Shared Access ICS, SysMain, Tapisrv, Wudfsvc and LanmanWorkstation ... Read more

A:Globalroot\Device causing empty device manager? No audio and print?

Hi,Welcome to Bleeping Computer. My name is m0le and I will be helping you with your log.Please subscribe to this topic, if you haven't already. Click the Watch This Topic button at the top on the right.

Please avoid installing/uninstalling or updating any programs and attempting any unsupervised fixes or scans. This can make helping you impossible.

Please reply to this post so I know you are there.The forum is busy and we need to have replies as soon as possible. If I haven't had a reply after 3 days I will bump the topic and if you do not reply by the following day after that then I will close the topic.Once I receive a reply then I will return with your first instructions.Thanks

Read other 2 answers

Model is Acer Aspire One D270.
Internal bluetooth doesn't work.
Nothing in device manager.
Fn+F3 is meant to control it, but doesn't.
May be because I've messed with some programs.
Trying to re-install to factory settings.
Any suggestions at all?


edit: The machine is Win7 baby (starter?), x86_32.

A:Bluetooth device not in device manager, no hardware switch, Acer netbk

What programs did you remove or mess with? Have you tried repairing these programs?

Read other 9 answers