Over 1 million tech questions and answers.

Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

Q: Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

Have a USB wireless WiFi unit. To connect to the Internet. Have to disable the Local Area Connection. When connected to the Internet. If I enable the Local Area Connection. Unable to connect to the Internet. When I disable the LAC, the Internet connection is restablished. Using a D-Link boradband VPN router.

RELEVANCY SCORE 200
Preferred Solution: Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Wireless Network Connection will only connect to Internet if Lcl Area Connect disable

sounds about right! Your big issue will be the VPN, as it is frequently specifically
config'd to use a specific adaptor AND to force all tcp traffic thru that connection,
even though you want to do some trivial google.com search.

Consider using a Hardware Profile to define
1) a LAN connection environment (ie no WiFi)
2) a WiFi environment (w/o a LAN)

the choice occurs at boot time and the hardware is enabled/disabled per
the profile.

Read other 1 answers
RELEVANCY SCORE 110

I'm using my home desktop to make this post. This is issue is with my Dell laptop that--up till an hour ago--had a wireless area connection icon in the lower right corner and a Wireless Area Network option when I went to "Network Connections" (I still have my LAN option.) I was using a Driver Whiz program to update all my drivers when it said I needed some Intel Wireless Config program. So I downloaded it but at the end I had no Internet access and no icon, etc. So I uninstalled that program but it was too late. I've even tried a system restore to a few hours prior to this mistake of mine to no avail. My husband says I need to connect hardwire to the Internet and download a WAN driver...is that correct?
 

A:wireless area connection icon missing/ cannot connect to Internet

Hi. You may find the Wireless Card Utility icon in the Control Panel..
 

Read other 3 answers
RELEVANCY SCORE 102

Ok i my father got me a new labtop for my birthday i had an old Linksys Wireless Router laying around and i decided to hook it up. I have Vista and i used the HP Networking Assistant to connent to it. After i did everything it said to do, it couldnt locate the router. I tried and tried restarting everything still nothing. With the cat-5 cable hooked up to the Labtop instead of the desktop i can easily get online. Im still running the wires threw the router and thew internet works fine. I just want to tke the labtop out of the office and use it for other things. Any suggestions?
 

Read other answers
RELEVANCY SCORE 99.6

Good evening I am having problems with my home network named Dlink Jones, I use a WiFi based adapter off my laptop to pick up the connection but for some reason it hasn't been connecting. Currently I'm picking up another connection but this one is much weaker than my home network connection. I tried to reset the firewall settings but I didn't have any luck getting the connection to become established. That being said I'm not the most computer literate person in the world so I don't know if I reset it properly. My WLAN is on and I can see the light, I have internet connection but not to the preferred network, and I also have this (System Info Utility):

[version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II P340 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 3834 Mb
Graphics Card: AMD M880G with ATI Mobility Radeon HD 4250, 256 Mb
Hard Drives: C: Total - 288345 MB, Free - 93852 MB; D: Total - 16594 MB, Free - 2394 MB;
Motherboard: Hewlett-Packard, 1604
Antivirus: Norton Internet Security, Disabled]

Please tell me if there's anything else I need to add for you to help me out.
 

A:Having Problems With Wireless Internet connection, Cant connect to home network

Read other 6 answers
RELEVANCY SCORE 98.8

I recently had my hard drive replaced. Before that, I bought a wireless router and had no problems connecting to it. Now, I am able to connect via local area connection but not to my wireless. Every time I select repair connection, it connects but hangs on repairing IP for hours. When I enter in the command ipconfig/release, the IP for wireless shows up as 0.0.0.0/0.0.0.0
I have spent hours googling this and playing around with it, obviously no luck. Help would truly be appreciated
 

A:Able to connect to local area connection but not wireless

Read other 7 answers
RELEVANCY SCORE 98.4

Whenever I try to use a program like AOL Instant Messenger I always get an error message saying the server can't be reached. The only thing that can seem to connect to the internet is Internet Explorer. Can anyone help me figure out the problem because I want to be able to use AIM.
 

A:My Wireless Area Network can't connect

Read other 6 answers
RELEVANCY SCORE 98

I have a lenovo u160 running windows 7, a couple of days ago it seemed my computer was infected with something, giving a series of security warnings I had not seen before (not av security suite). It slowed the computer down for a few minutes.

After closing these messages, there seemed to be no problem, but then my computer was no longer connect to the internet. It connects to our router/wireless network, but not to the internet.

I tried resetting and unplugging the router and the modem, but still no luck. We have two other computers on the same network that are connecting to both the network and the internet.

I tried running rkill and malwarebytes twice and no malicious items were detected.

I restored the computer to an earlier point (2-3 days earlier)

On the toolbar in the bottom right of the taskbar, it shows a 5 white signal bars, with a "!" inside a yellow triangle.
If I click on the network button it states it is "connected" to the network. It describes the connection as "excellent" (4-5/5 bars).

Above the display of the available networks, it states

"currently connected to:
Unidentified network
No Internet access"

I am not computer savvy and have not run into this problem before. Thanks for your time and help.

A:possible infection, now can connect to router/wireless network, but does not connect to the internet

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan"... Read more

Read other 13 answers
RELEVANCY SCORE 95.2

Hi I need a little assistance. I am on a dell laptop running Windows XP Pro SP2. This is my mothers laptop and I have no clue what she did with it. OK, so I have an IP address, connected to Wireless network, can ping DNS Server, DHCP server, and Default Gateway. Tried the Winsock reset and the int ip reset. Also IPconfig release and renew. Haven't gone into the registry yet (Kinda nervous don't wanna mess anything else up. Need specific instructions). Uninstalled and reinstalled drivers (found online). Ran into a whole different set of problems and error messages, but I've gotten all those resolved already. I connected a LAN line with still no luck. I even installed Firefox. With all that done it still won't connect to the internet. I've used up all my tech savvy\expertise and I'm at a lost. Anything else you can think of that I can try? Thanks in advance
 

A:Can connect to wireless network, but can't connect to internet.

Read other 11 answers
RELEVANCY SCORE 94.8

How do I connect to internet using Local Area connection? I only access internet via wireless connection. With Local Area connection, IPv4 and IPv6 do not have internet access.

Connection-specific DNS Suffix:
Description: Broadcom NetXtreme 57xx Gigabit Controller
Physical Address: ‎00-25-64-6C-2F-D8
DHCP Enabled: No
IPv4 Address: 172.16.70.120
IPv4 Subnet Mask: 255.255.255.0
IPv4 Default Gateway: 172.16.70.1
IPv4 DNS Server: 172.16.70.10
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::36:1641:a5c7:8968%11
IPv6 Default Gateway:
IPv6 DNS Server:
 

A:Connect to internet using local area connection cable

Read other 10 answers
RELEVANCY SCORE 91.6

I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1. Any ideas?

More info:

ip config /all
netstat -n
ping&tracert 192.168.1.1
 

A:Solved: Can't connect to internet but Local Area Network is sending packets

Read other 7 answers
RELEVANCY SCORE 90.8

I have Comcast cable internet in Atlanta and use a Motorola SB6121 modem and a Linksys wireless router. The wireless network has been up and running for over a year and I have never had any problems with it and I have never made any changes to it after the initial setup. I connect to the wireless network using two smart phones and an Apple laptop. I live in an apartment so the signal strength is always high and I am never more than one room away from the wireless router.

It was working fine one night like always and then in the morning I was unable to connect to the wireless network. I can still access the internet via wired ethernet cable so I know the internet is online and it is downloading at full speed. I can access the internet via wired connection directly from the modem to the computer. I can also access the internet via wired connection from the modem to the router to the computer. Comcast shows no problems with the connection on their end.

I have purchased all new ethernet cables so I know the cables aren't the problem so I figured the wireless router might have a problem. I bought a new wireless router (Apple Airport Express) and created a new wireless network. I can see the network name is available and it has full signal strength with WPA2 encryption just like it had always been with the old router.

When I try to connect from my phone or laptop it will say "Unable to obtain IP address" and "Network disabled because the internet connection i... Read more

A:Unable to connect to wireless network. "Internet connection is too slow."

if the router is working with a cable connection, then its unlikely to be the modem , unless thats also a router and you are using it for DHCP

you say the modem is connected by cable to the router
and any device connected to the router by cable works perfectly - is that correct

on the old router - have you removed the wireless security and see if you can connect ?

carried out a full power cycle - see below

also it would be worth making a note of the router configuration and do a factory reset on the router and re setup and try again

with a PC connected by a cable direct to the modem can we see an ipconfig /all
now do a power cycle and connect the router
with a PC connected by a cable direct to the router can we see an ipconfig /all

------------------------------------------------------------------------
ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunne... Read more

Read other 3 answers
RELEVANCY SCORE 89.2

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) M processor 2.26GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 2047 Mb
Graphics Card: NVIDIA Quadro FX Go1400, 256 Mb
Hard Drives: C: Total - 95393 MB, Free - 51699 MB;
Motherboard: Dell Inc.,
Antivirus: Norton AntiVirus Online, Updated: Yes, On-Demand Scanner: Enabled

I recently upgraded my internet to a faster speed. I received a new router. I am able to connect my laptop via ethernet connection without any issues. I am able to connect my laptop wirelessly both at work and at school. I am unable to connect wirelessly at home. I can connect my stand alone computer to my internet connection. I am also able to connect my smart phone to this connection. When I attempt to log into the internet connection I enter the passphrase as instructed the entire screen goes blank and when I try to reconnect the computer is automatically entering a different passphrase and gives me a message "waiting for network" then it disappears and I am not connected - when I attemp to correct the passphase it will not store the new setting. I have tried updating the driver - changing the passphrase - restarting the computer, I have used the diagnostic check provided by Century Link and spent over 4 hours on the phone with them trying various things without any connection.

Ugh!!!
 

A:Wireless Network Connection will not connect

a couple of things to try
and post an ipconfig /all-see below

tcp/ipreset - see below
remove the wireless profiles - see below

------------------------------------------------------------------------

How to remove Wireless Profiles - for XP
http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm
- XP
http://www.tp-link.com/support/showfaq.asp?id=186
- delete the preferred networks
start> control panel> network connections> right click on the wireless connection> listed wireless networks tab in the preferred network list click on each one and - remove button

you will then have to enter the wireless security key for any networks you connect to - so make sure you know the correct password , and not using an incorrect password at all

------------------------------------------------------------------------

------------------------------------------------------------------------

TCP/IP stack repair options for use with Windows XP with SP2/SP3

Start, Run, CMD to open a command prompt box
(A new dialogue box - black with white font, will appear on the screen ):

In the command prompt window that opens, type the following commands:

Note: Type only the text in bold and red for the following commands.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log and press enter

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog and press enter

ReStart (reboot) the mach... Read more

Read other 1 answers
RELEVANCY SCORE 88

Hi. I use my PS3 controller to play games. I had it hooked up to play a game and then my PC froze. This caused a physical memory dump. After this my wireless network card would see my network but would not connect to it. I can connect to it wired, and other computers in the house can connect to it wirelessly, but this computer refuses to do so. I have checked the device manager and there are no exclamation points. I have also checked to be sure the device is not disabled and it is not. I have also reset the router several times as well as rebooting and shutting down the PC. I have been using the wireless connection for about 8 months now so I don't understand why it isn't working now. Please let me know any info you need from me to get this working again. Thanks.

A:Wireless Adapter Will See Network Connection, but Won't Connect

I would try and re-install the driver as a first step, or have you tried this already?

Read other 9 answers
RELEVANCY SCORE 88

I use Windows XP. I am able to connect to the internet through LAN. But its not working with Wireless. It shows Acquiring Network Address..but does not get connected. The wireless network connection status shows address type as Invalid IP Address. Can anyone pls help me in resolving this.

Thanks
 

A:Unable to connect to Wireless Network Connection

Read other 11 answers
RELEVANCY SCORE 88

I have a cable modem that I can connect to successfully when using an ethernet cable from my wireless router however when I try to connect to the wireless network windows vista says it is unable to connect. The wireless network is displayed in the list of available networks but the error message appear immediately. If I run ipconfig/all this is the results:

C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Kiah-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1D-72-51-F5-F7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::c182:9b2f:daea:1847%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, April 29, 2008 12:33:27 AM
Lease Expires . . . . . . . . . . : Wednesday, April 30, 2008 12:33:27 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Me... Read more

A:Cannot connect wireless network - Ethernet connection OK

Read other 16 answers
RELEVANCY SCORE 88

I'm posting this for a family member who can't access the internet to post. I have not seen the computer so I can only give what details I can, but I can always text message the person for more details.

When right clicking on the wireless computer symbol in the corner near the clock they try to access their wireless connection (which works on 2 other laptops that are sometimes in their home) but they get the error "windows cannot connect to the wireless network connection". I had her check out the device manager and there didn't appear to be any problems in there. I had her check "Network connections" and she didn't see anything in there. There were two "wireless networks" listed in there. One said it was "Broadcom netXtreme gigabit Ethernet" and the other was called "LevelOne WPC-0301 11g wireless CardBus adapter" She tried doing the "repair" but it did not work.

I had her try the following: http://support.microsoft.com/kb/870702, when we got to the #4 "If the Windows Zero Configuration service is running, the words "STATE : # RUNNING" will appear." she noticed that instead of it saying RUNNING it said STOPPED. I had her try to follow the "Basic troubleshooting" listed on that site, but we got stuck when we got to #5 "If you can view the properties for the Wireless Network Connection icon, but you do not see a Wireless Networks tab, see the Drivers that do not su... Read more

A:windows cannot connect to the wireless network connection

Did this computer ever work on the wireless connection? or is this a problem with a new network connection?

Am assuming from the selected forum that we are dealing with windows XP. Is that correct?

From looking into the network cards that you listed it appears that the Level One card is the wireless and I'm thinking the Broadcom card is probably the wired network card on the machine. Is this computer a laptop?

I read through the manual for the level one wireless card located at http://global.level1.com/downloads.php?modelstr1=WPC&modelstr2=0301&sendtype=0
and it appears that this card has its own management software. In windows XP, if a network card has its own control software it can disable all windows control over connecting to wireless networks. Your friend should look through the installed programs for a management utility that may work to connect right away. I believe if this doesn't work, that there is a way to assign the control of wireless networks back to windows itself, but I can't remember how.

The link above to level 1's site also has downloads of the drivers for that card. The XP/Vista driver is the second one down in the driver's section.

Read other 3 answers
RELEVANCY SCORE 88

Hello,

So I have a brand new computer (home build) running Windows 8.1 and a brand spanking new USB wireless adapter (Trendnet N300 dual band). I installed the adapter from its disc on Friday and used it fine all night. Wake up Saturday and I'm getting 'limited connection' when connected to my home router.

After a lot of playing, updating the drivers for the adapter, updating Windows, playing i n command prompt...it now won't connect to the router at all.

I'm currently connecting via a bridged ethernet connection to my Macbook.

Extensive googling just isn't turning up a solution, and if anything seems to have made it worse seeing as the adapter can't even connect to the router now! This also seems to be a common problem with Windows 8.1?

Thanks for any help, I am really at my wit's end!

ipconfig /all results:

Windows IP Configuration
Host Name . . . . . . . . . . . . : PCOfAwesome
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Network Bridge:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Network Adapter Multiplexor Dri
ver
Physical Address. . . . . . . . . : 94-DE-80-C3-D3-3D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9583:e240:a14:87ee%13(Preferred)
IPv4 Address. . . . . . . . . . . : 192... Read more

A:'Can't connect to network' wireless connection issues

If you can connect to your router via ethernet, go to your router's admininstrator page, usually : http://192.168.1.1/
There should be a setting to change your wifi channel : try 1, 6 or 11. There might also be an option to restart your wifi connection from the router, use it.

Read other 6 answers
RELEVANCY SCORE 87.2

Hi

I am setting up a wireless network. I have installed actiontec dsl gate way on a
computer running windows xp. the second computer is running windows me and I have installed s super g wireless pci adapter. Everything appears to be good. I have a connection on the second computer. However when I attempt to use firefox no web sites are available.

I am not sure if this is a security setup problem or a networking problem.

this is really not punny.

Thanks
punnyman
 

A:Wireless network connection is strong but browsers don't connect

Hello, punnyman, and welcome to Techspot :wave:

Please take a look at the following threads to make your experience here as enjoyable as possible

Message for all newcomers

SNGX1275's Guide to making a good post/thread

The Techspot FAQ

If you could take a minute to fill in some of your profile information that would be helpful to all members of the forum
Knowing someone's location in the world can be extremely helpful, even if you just put a country.

Also remember to post any problems or questions that you have in the appropriate forums

With regards to your problem, it sounds like the router settings might not be set up properly, make sure you have set up your internet connection properly if it a modem and router in one. There is quite the difference between having a wireless conection to the router and having a connection to the internet
 

Read other 7 answers
RELEVANCY SCORE 86.4

IP config for wireless:
Windows IP Configuration

Host Name . . . . . . . . . . . . : acer-47cbe8a5ed
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes

Ethernet adapter Local Area Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethern
et
Physical Address. . . . . . . . . : 00-16-D3-E1-2A-C8

Ethernet adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-1C-26-04-5A-4F
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.3
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.0.0.2
DNS Servers . . . . . . . . . . . : 196.43.50.191
196.43.53.192
The laptop is an Acer Travelmate 5310 and the router is a Mega 105WR. Although it will connect to the internet via cable, it will not do so on the wireless connection although there used to be no problem. I have checked with the ISP support desk and we established that the wireless connection is fine - it just cannot connect to the internet. We gave it a static IP and DNS address as above because when we asked it to do the automatic option it could not acquire an IP address. After a week of phone calls to the help desk I gave up and went out and bought a 12... Read more

A:Cannot connect to internet via wireless connection

Read other 6 answers
RELEVANCY SCORE 86.4

I have an issue today after downloading a way to remove the Trend Micro Office Scan. The program than asked me to restart my computer in order to succeed in removing it. After that, my desktop wallpaper turned black and the internet would not connect anymore. I downloaded the 32bit.exe file from the trendmicro website. I am currently using another computer to post this. I have ran many troubleshooting stuff. So far, the laptop failed the ping test and gave me a local area connection is unplugged message although I use a wireless connection. I am using Vista

Here is my Ipconfig /all

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

Windows IP Configuration

Host Name . . . . . . . . . . . . : DQWKPX84
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-24-E8-AC-57-FA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . ... Read more

A:Wireless Connection cannot connect to the Internet

There is no evidence there of any wireless hardware. What is listed in Device Manager under Network Adapters? What, if any, warnings or errors are anywhere in Device Manager?
 

Read other 3 answers
RELEVANCY SCORE 86.4

when i try to connect to my network under view wireless networks it tries to connect then says Automatic with the star but nothing else and does not connect
 

A:wireless internet connection will not connect

Read other 11 answers
RELEVANCY SCORE 86.4

i want to connect the Internet with wireless connection. the signal strength is display very good but i can't connect with Internet and display wireless network icon is cross sign. i already enter the network keys but can't work, also repair is not work. so pls help me and give suggestion. thanks .

A:wireless internet connection can't connect

Quote:





Originally Posted by leophyo


i want to connect the Internet with wireless connection. the signal strength is display very good but i can't connect with Internet and display wireless network icon is cross sign. i already enter the network keys but can't work, also repair is not work. so pls help me and give suggestion. thanks .

Read other 1 answers
RELEVANCY SCORE 86.4

I'm having problems connecting to the internet via wireless, but i don't think the problem its the wireless connection instead i think it's the LAN causing some problem, cause i've disabled it and the wireless works for while but then stops working, i've tried to repair the lan but always gets stuck in renewing your ip address. I think this might help, dhpc it's enabled and i have a dynamic ip address, also i think it's a problem with the computer cause i've used the same wireless connection on the iphone and it works fine. I know the mac address to block my device is not enabled

Posted via Mobile Device
 

A:Can't connect to internet using wireless connection

Read other 16 answers
RELEVANCY SCORE 86

I have a Gateway NV59 that I had not used for some time. Recently I started to use it, and I cannot connect to any web pages. I am connected to my wireless network. I have tried all the diagnostic tests I can find on my laptop, and they do not identify the problem. I am running Windows 7 Home Premium. I have Explorer, Safari, and Firefox browsers and non of them will work. Does anyone have any ideas? I am a competent computer user, but not a techie at all.
 

A:Solved: Can't connect to Web Pages, connection to wireless network is fine

Read other 10 answers
RELEVANCY SCORE 86

Unable to connect to network with either a wireless or hardwire connection.

I do not use this computer very often. It is the one used by my kids to play "Club Penguin", etc.

I was away at scout camp with my oldest boy and when I got back, the internet did not work. It appears that several other "System" resources are not working either.

I did IPCONFIG /ALL and nothing is connected.

I tried to ping the router and got no response. "Transmit failed"

I tried to go to restore and that failed as well.

I went to the store and picked up a new usb wireless card and that did not work either. I feel confident that the issue is NOT the wireless card. I attached a screen shot of the IPCONFIG /ALL screen.

I am having a challenge to figure out how to fix this.

Please help.
 

A:Solved: Unable to connect to network with either a wireless or hardwire connection.

Read other 16 answers
RELEVANCY SCORE 86

I have a Dlink DIR-655 router which is currently connected and set up to my network. I worked perfectly for a few months but then my internet all of a sudden stop working. So I called costomer service and the tech. told me to go to Tools>Internet Options>Connections>LAN Settings> Advanced, he then told me to change the HTTP and Port to his new settings. This magicly fixed my intenet connection on my desktop (XP) but when I tried to use the wireless on my laptops (Vista and Mac OS) nothing happend. The status on both laptops say "Connected" but the internet doesn't work. I have been researching this for quite some time now but haven't found a solution. Any help would be GREATLY APPRECIATED! Thank you- Drakb
 

A:Able to connect to network but no internet connection

Read other 13 answers
RELEVANCY SCORE 86

my pc shows to be connected to the network but not connecting to the internet. This computer is about 3-4 years old, running vista home premium 64 bit. I am absolutely clueless what to do. All advise is appreciated.

I should add I'm trying to connect via wi-fi. I have other computers and devices working just fine.

Thanks, Christine

[ATT

A:network connect, but no internet connection

Hi Christine.

Has it been connecting to Wi-Fi before in the past?

Read other 19 answers
RELEVANCY SCORE 86

I have to use my desktop icon(net zero) to connect to internet. I get an error that remote computer is not responding other wise. what info do u need? thanx
 

A:cannot connect to internet using network connection

let's start with 'what do you expect should be happening'?
I think you're using a dial-up (pls correct me) and if so, that's the way all dial-ups work;
click on an icon
modem dials out
you log in
and as long as you stay connected,
email and your browser are functional.
 

Read other 1 answers
RELEVANCY SCORE 85.6

She keeps loosing connection, then has to wait until it decides it can connect again. She would wait about five minutes and then click on something and would gain access.

http://www.sevenforums.com/network-s...reconnect.html

the symptom has been occurring for at least a month and more.

We are on a wireless network (Uverse) and have not had any problems with this wireless network

One thing i notice is that her icon for the connect shows one less bar than mine shows. I should be the same. they are both HP machines and sit in the same spot.

when it is not connected and the icon is clicked it does not show our connect name as an option. Sometimes rebooting solves the problem, sometimes clicking 'connect' does. It will work for a while and then she looses the connect.

I am not sure that her problems started when she got that "conduit" search malware. I had only partially removed it, it was still resident when another tab on her firefox was opened. Yesterday i found some additional information to remove the settings from registry and thought that had cured it. But apparently it did not, we are now back to the disconnect problem. last i tried it it wouldn't even connect on restart. Right now she is saying that its been doing pretty well for about five minutes. Probably wont last long.

I don't really know why this all started I think it went back before the 'conduit' thing got installed. She usually doesn't say anything to me she si... Read more

A:still looses connect/doesn't connect - win 7 wireless home network

How far away from your computers is the router? Also; have you tried to power cycle the modem and router? If not; i would try that. Unplug both the modem and router; wait about a minute; then plug in the modem first; let that boot; then plug the router back in and let that boot. Try doing that and see if it helps the situation.

Read other 3 answers
RELEVANCY SCORE 85.6

Hi
I use my android device as wifi hotspot to connect to Internet. It was working fine on my older laptop. Now I have switched to a new laptop. now, When I switch on the wifi hotspot, the laptop connects to the same. The wireless on laptio shows that it is connected to wi-fo (With Internet Access). However, I am unable to open any websites.
I tried the same laptop on another wireless networks and it is working fine. I also to use my wifi hotspot on another laptop, that is also working fine.

I browsed through different forums and found that IPCONFIG ALL information might be helpful, so I have gathered the same and posting it over here.
Windows IP Configuration

Host Name . . . . . . . . . . . . : Info_548
Primary Dns Suffix . . . . . . . : info.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : info.com

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : infodcsig
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 78-45-C4-BA-47-98
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom Virtual Wireless Adapter
Physical Address. . .... Read more

Read other answers
RELEVANCY SCORE 85.6

I have two wireless routers, one Linksys N and one Netgear G available in the box. My laptop is N and my wife's laptop is G. But I only have one internet connection. As far as I know the N network is degraded to G if I add her G laptop to the network. Could I activate the G router by connecting the two routers via a lan cable and assign her laptop to it? I would try that but searching and reading posts here makes me think I should avoid uneducated experiments.

Any help would be appreciated.

Jack

A:How do I connect two wireless routers to one internet connection?

Hi jborchel

Use one wireless router for both laptops.

Read other 11 answers
RELEVANCY SCORE 85.6

Im using a Sony vaio laptop with windows vista. My Internet used to work perfectly and suddenly today my wireless will connect but I can't use the Internet. My iPhone and my aunts laptop can connect and work fine, it's just my laptop that has the problem. I've tried a system restore and a few other things but nothing seems to work. Please help!
 

A:Wireless connection strong but Internet won't connect

Please attach a screen shot of the Networks page of the Xirrus Wi-Fi Inspector and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 85.2

I'm trying to help a friend out with connecting from a wireless router. Thought it would be an easy fix--but not what I expected.

Problem is not getting to the internet. I've tried plugging a wired connection and wireless but no internet. "Internet Explorer cannot display the webpage" and when I click on Diagnose Connection Problems - "Windows found a problem that cannot be repaired automatically"
It has worked before but not recently. I've updated the wireless card software, ran anti-spyware/antivirus programs, ran winsockfix but nothing works.

It's a vista Home Premium O/S-32 bit, HP Pavillion 6000,

So if you guys can provide some info, I'd greatly appreciate it. Here is the IPconfig and ping information. Also, when I do nslookups I do get data returned.


C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Mobile
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hawaiiantel.net

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : hawaii.net
Description . . . . . . . . . . . : Broadcom 802.11b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-5E-4A-0F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-lo... Read more

A:Able to connect to wireless network but not to Internet

sorry to say i cant help you, all i can say is that i had the exact problem with my sister's Vista PC and after about 5 hours i gave up and did a restore, no amount of googling helped at all.

Hope someone can help you mate
 

Read other 6 answers
RELEVANCY SCORE 85.2

i have a conpaq presario cq60-211dx with vista home basic. Also, I have two macintosh desktops. I can connect wirelessly to the internet fine on my desktops, but on the laptop I cannot. If i use the ethernet cord, the internet works, but not wirelessly. It says I am connected to the network, but the internet browser won't work.
 

A:can connect to network, but not to wireless internet

Did you make SURE you have the correct encryption key for the desktop? Remove any stored wireless profiles and search for new networks and connect.
 

Read other 3 answers
RELEVANCY SCORE 85.2

I can connect to a wireless net work with an "excellent" signal, but it will not let me get on the internet. If I plug the ethernet cable into the router, then it lets me get online. I think that something on the laptop is not set up right, but I don't know what it could be. My room-mate is able to get onto the internet with a connection to the same wireless network/router. Please help me, I don't know anything about this stuff. Thanks
 

A:can connect to wireless network, but no internet

How exactly do you have your wireless setup? What type of encryption? Do you have the DNS servers specified, or taken from DHCP? Are you manually assigning an IP address, or are you getting it from the DHCP? Can you ping www.google.com?

BTW
:wave:Welcome to TechSpot:wave:
 

Read other 4 answers
RELEVANCY SCORE 85.2

Hello everyone, I need some major help.

My computer was recently attacked with spyware and possibly viruses. I ran a few spyare removal programs and it looks like it fixed and cleaned everything up. BUT, I'm afraid some got deleted or changed on accident in the process...

My computer is old -- it doesn't even have a ethernet port. So a while back, I installed a wireless adapter (?) in my desktop and also purchased a D-Link wireless router. This is how I connect to the internet.

Everything was fine until I was hit with all this spyware. Like I said, the spyware is gone, but my computer might have been messed up in the process because I can't seem to connect to the internet anymore.,,

It looks like my IP address has changed. Before, it was 192.168.... But now, it's 169.254... I don't know why or how it changed. But even if I change it to 192.168..., it still doesn't connect.

I read on this forum that I should try Start > Run > CMD....etc. BUT, every time I try to run CMD, I get an error saying "Another program is currently using this file." And it won't let me do anything.

So then I tried to see what's running under my task manager. But when I try to CTL/ALT/DELETE, the task manager doesn't even open! Even if I right-click on the task bar and choose "task manager," it won't open. What gives??

Any suggestions? I know I should get a new computer soon, but I need to connect to the internet! I'm... Read more

A:HELP! Can't connect to internet/wireless network

Read other 9 answers
RELEVANCY SCORE 85.2

I am able to connect to a wireless router/network with internet access as a guest user of the router. The guest user of the router is passworded. I have been using an older laptop running Vista and have had no problems. I just purchased a new Toshiba Satellite L755 with Windows 7 to replace the Vista machine. I am able to connect to the same router/network with the new laptop but it will not connect to the internet. I get Local Only With No Internet. I have set both machines side by side to compare settings and the Vista machine will connect completely but the Windows 7 will not. I also have never gotten any window pop up that allows me to enter the guest password as it did in Vista. Hope you can help. Thanks

A:Can connect to wireless network but not internet

Welcome to Seven Forums,

You might have to add the SSID (wireless network name) manually on the Win 7 computer.
How to manually connect to Wireless network not broadcasting SSID | Windows Reference

If that didn't help, please post an ipconfig /all output of the computer in question.
Click on Start => in run or search box type cmd, press enter. From the command prompt (black screen), Copy and Paste these ipconfig /all >c:\ipconfig.txt . Please attach the .txt file to be found in your Local Disk 'C' on your next post.

Read other 9 answers
RELEVANCY SCORE 85.2

hi, posting for the first time here. i have a toshiba satellite laptop, and in my house we are using a billion wireless router, i am running windows vista, and the network appears available, and i am able to connect to it fine, but once connected i am unable to get onto the internet, a problem which does not occur for all others using the network. In the house we have a spare BT homehub wireless modem (we use the billion though as speeds are MUCH faster), and i was able to get onto the internet fine with that (until this week, where sometimes the network isnt even being recognised using this modem, and other times is recognised but wont let me onto it), during the time that the homehub was working, i was able to connect using that, then disconnect it, reconnect the billion modem, and then the internet would work on my laptop... very confusing! but that meant having to do this every time i switched my laptop on, and now that the homehub is playing up for me then things are even more difficult and i am having to revert to the good old ethernet cable (which works perfectly with either modem by the way).

Any help you can give me on this matter would be GREATLY appreciated as it is very annoying, if you need any more details from me feel free to ask, ive seen a lot of great responses in these forums and hope you can help me with my problem as you've helped countless others (and sorry for the long post).

Thanx in advance,

Gary
 

A:Can connect to wireless network, but no internet

Read other 8 answers
RELEVANCY SCORE 85.2

Hello,

I have a Linksys E1200 wireless router and I am having problems connecting to the internet. I can connect when plugged in to the cable modem directly. I can connect to the wireless network, but there is no internet connection. I ran ipconfig release and renew. I think it may be a DNS problem, but I'm not sure. I would appreciate any help.
 

A:Wireless network does not connect to internet

Read other 9 answers
RELEVANCY SCORE 85.2

Hi - I have spent hours trying to figure this out with firefox and Apple to no avail. I have a home network with two computers. The cable modem goes to an Apple Airport extreme. To the Airport I have connected a USB hard drive, my desktop computer and an ethernet printer. Wirelessly I have connected a printer and my laptop.

I have been having problems with the wireless print router for a while. My recent problem is that my Toshiba Satalite laptop connects to the network with no problems, but I cannot connect to the internet. I have cleared the dns cache, I have reset the Airport, I have changed and re-change the security (wpa to wep and back again), I even discovered that I can ping google through the CMD.

I was connected to the internet without problems until two days ago, unexplicably, my laptop just wouldn't connect. The only thing I did was plug the new ethernet printer into the Airport. The desktop connected to the printer without trouble. I think it is just coincidence since I have tried unplugging the printer and still have the same issue.

My desktop is running XP pro and the laptop is running XP media. Help!
 

A:Can connect to wireless network, but not to internet

The default gateway (router IP address) should be present on all PCs that what gets you the internet access.
Under the XP boxes under Internet Protocol TCP/IP click on properties the click on advance and make sure the metric is set to router gateway address IP.
 

Read other 4 answers
RELEVANCY SCORE 85.2

I can connect to a network but not the internet on wireless, works fine with a ethernet cable though, I have googled the problem and seems common but theres hundreds of different anwsers and I dont like the look of download links that usally get posted on replys,
Im on windows vista home premium and not all that experienced when it comes to computer talk, but im not thick so if explained I can follow any intsruction, PLZZZZZ HELLLLP as this is driving me mad,

Kind regards
adizard

 

A:I can connect to a network but not the internet on wireless

Read other 16 answers
RELEVANCY SCORE 85.2

Hi, I really hope someone can help me.

I have a wireless internet connection at home and was using the Internet fine up until a couple of days ago. Now, whenever I try to view a webpage I get the "page cannot be displayed" error page, my messenger services cannot log on either so I'm assuming I have no Internet connection. However, all the other computers and the laptop in the network are working fine (hence me being able to post this). My computer says that it has a "Very Good" connection to the network and I don't see anything wrong. I have tried rebooting several times, repairing the connection, disconnecting and reconnecting but nothing seems to work.

Please does someone know what could possibly have happened? It is very frustrating having to borrow someone elses computer just to view my emails etc.

Thanks in advance, sammantha

A:I Cannot Connect To The Internet On My Wireless Network

Are you able to Ping you router?

go to "Start" and click on run
Type in "CMD" wihtout the " " in the box and hit run, then in the window type in Ping and then your routers IP address. so it would look like this:
ping 192.168.1.1 or ping 192.168.0.1

Try that and then post back and we will see what eles we can do about it.

Read other 2 answers
RELEVANCY SCORE 85.2

I I have recently upgraded to Windows 7 and since then I have had a problem connecting to the internet with IE8. connection to internet via the wireless router is ok as virus etc is updating, but every tim I try and open IE I get the message Internet Explorer cannot display the webpage, then the option for Diagnose problems is offered, I have clicked this and still no joy. I have also reset IE.

Sparodically it will connect and this is what is confusing me

Any help will be appreciated

Thanks
 

A:Wireless Network Detected, but Internet Explorer Wont Connect to network in Win 7

Have you tried any other browsers? SeaMonkey is a good one to try if you don't have another. You can still keep IE as default and have SeaMonkey for backup for web pages that may not display correctly in IE or when you have access problems like you are having now. Being Mozilla-based, it uses a different rendering engine. For those web sites that support pipelining, you may also find that it is considerably faster.

Check your connection settings under Internet Options. In the LAN section, try toggling the "Automatically Detect Settings" option.
 

Read other 2 answers
RELEVANCY SCORE 85.2

Hi, Have a problem there, Just reinstalled a fresh copy of Windows XP and WAS having problems having my Linksys 802B wireless card but now it finally detected.. just reinstalled the driver. Now another problem is.. when I double clciked INternet Exploroer, webpages dont load up. A box pops up tp ask if I want to workoffline or Connect. I click on COnnect, and the box then said " No connection to the internet is currently avaiable." The thing is that my wireless adapter is already connected to the DSL in perfect signal connections.

I then went to to Network COnnections folder, There are 3 icons, one says Incomming, the other 2 in the LAN or HighSpeed Internet section says 1394 Connection, and Wireless Network Connection Enabled. On the far left column, i clicked on Create a New Connection. I clicked the option of " Connect to the internet" , then "Setup my Connection Manually.". Then " Connect Using a broadband connection that is always on." .. because I dont need a login name and password. After clicking NEXT and Finished, ..nothing happened.. i clicked on IE again, and same thing pops up. I tried doing the 2nd option to let u enter the ID and password BUT disable the prompt to log in with a username and pw.. still dont work.
What gives? How do i fix this problem? Any help is appreciated. thnx.
 

A:Wireless Network Detected, but Internet Explorer Wont Connect to network??

Read other 11 answers
RELEVANCY SCORE 85.2

I am unsure if these two problems are related, but they happened at the same time so I believe it's worth mentioning.
I have a Gateway T-Series (Model no. T-1628, also Model no. W350A) with Windows Vista Home Premium. This happened randomly. I did not make any changes to the computer, install/uninstall anything, etc. I simply booted it up as I usually do to be greeted with the error message and no wireless capability. 
 
At first, I tried to troubleshoot why there were no available connections on this computer, when I was using a different laptop on the internet right next to it with no problem. The troubleshoot said that my wireless capability was turned off, so I hit the shortcut keys for it (Fn, F2), which did absolutely nothing. I went into the Mobility Center, and the "Turn Wireless On" button was greyed out and unclickable. I went into device manager, and the Network drives were showing and they were up to date and seemed to have no error messages. I have tried restarting, refreshing the internet connection menu in the tray, and the things mentioned above multiple times with no success whatsoever.
I found that from time to time, the error message will not pop up upon startup, usually if I wait a little bit before logging on with my password, but no matter what I do it shows that I have no wireless capability and it will not let me change that.
Any help is greatly appreciated. Thank you!

A:"Could not connect all network drives" with no internet connection.

Hello, and Welcome
 
It could be caused by a failing wireless card or one that is not properly seated. With the battery out and the power adapter detached, remove and reseat the Wireless card. You will need to unclick the antenna wires to do this. 
 
It could also be that the wireless driver is getting wonky and a updated drive download would help. I could not find anything regarding a wireless drive for this model.
 
Right click the Wireless adapter in Device Manager. Select Properties and under the Details tab select Hardware ID's in the dropdown box. Copy and Paste the first line in your next post.

Read other 5 answers
RELEVANCY SCORE 85.2

Hi, I'm having problems with my internet connection. I can connect to the internet, but it seems to disconnect every second or so. I first thought the network adapter drivers were corrupted, but even after reinstalling it didnt help at all.

I forgot to add this, if I run the cable to my wireless router instead of to the modem directly, the internet works properly, although a bit on the laggy side.

A:Can connect to the network, Unstable internet connection

I don't see any real problems with the ipconfig.

Are you using a regular modem for this, as in not a modem/router combo which is then plugged into another router?

Read other 5 answers