Over 1 million tech questions and answers.

can't connect to internet after unplugging then plugging cable

Q: can't connect to internet after unplugging then plugging cable

Hi all,

I'm at a dorm room with cable internet. It usually works fine, but now if I unplug it, then plug it back, the computer doesn't connect to the internet anymore. Sometimes it says it's acquiring network address, but that doesn't change. The computer connects to the internet fine if I turned on the computer with the cable already plugged in.

Another computer doesn't have this problem with the same cable, always able to connect after being unplugged/plugged. Both computers are on Win XP.

I suspect the Windows firewall has something to do with it, if only because it is turned on the the problematic computer, and not on the other one. I couldn't turn it off, however, because it doesn't let me open up Windows Firewall Settings, giving me the message that the "associated service is not running" and whether or not I could like to start it. If I click "Yes", it simply says it "cannot open Windows Firewall/Internet Connection Sharing service".

Please let me know what the problem might be and what i can try to get it working again. I hope I haven't given too much useless information.. haha. Thanks!

Dave

RELEVANCY SCORE 200
Preferred Solution: can't connect to internet after unplugging then plugging cable

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: can't connect to internet after unplugging then plugging cable

Read other 13 answers
RELEVANCY SCORE 90.8

Hi Experts, I have a serious problem using my W520 since a few month. When plugging in or unpluggingthe power cable the system directly jumps into Blue Screen (BSOD). I used a small tool to extract the basic dump message: RESOURCE_NOW_OWNED I installed the newest versions of LENOVO Solution Center, LENOVO Energy Management, ...I did an BIOS update longer ago, but I'm not sure, if there was a time-based relation to my problems. The BSOD occurs when: * Laptop started with power cable => Power unplugged* Laptop started without power cable => Power plugged* Laptop in sleep mode => Power plugged and Laptop started again lifting screen* Bring Laptop in sleep mode => Power plugged Does anybode had this problem. Before every meeting now I have to shutdown and restartthe engine... I'm not sure, if the Windows repair CD could detect and repair such a problem.Thanks in advanceKlaus Wegener

Read other answers
RELEVANCY SCORE 73.2

Getting ready to do the install on my new SSD with some trepidation. I have Raptors in Raid 0 right now and would like to simply unplug them, set the BIOS to AHCI and use the 0 port for the SSD experiment/potential fiasco. What I hope to be able to do if the SSD doesn't like me, is to unplug it, set the BIOS back to Raid, plug in the Raptors and pretend the whole thing never happened. Does this stand a chance of working?

A:Plugging and Unplugging!

I wouldnt unplug the raptor raid - if you use intel raid (the one i'm sure of and probably similar, or the same for others) when you enable raid in the bios it also enables AHCI - so you should be good to go with testing the ssd drive - just unplugging a raid array can be very hard to set up again - i did it years ago and it was a miracle i got it back up and going again (that included reinstalling the OS) so not recommended - it also depends what options are available in the raid rom (i think its called) which you set it up in before you install the OS. From memory, which is bad, the problem was it couldnt recognise one or both the drives.
It depends on your motherboard I guess but for mind it should be ok - running raid and using the same controller to use a ssd drive in AHCI mode - but treat this as my opinion - you should be able to find information on your motherboards site, or intel etc's, site. Or wait for more replies as Im uncertain and more repies means more suggestions.
If it has 2 controllers eg intel and jmicron use the JMICRON if it supports AHCI to be on the safe side.

Read other 3 answers
RELEVANCY SCORE 72.4

Hi everyone, hope this is a good year for all. I just picked up a new computer running xp. It came without a floppy drive, so I picked up a portable external usb floppy drive. Is it ok to plug in, and unplug the floppy to the usb port with the computer on? Thanks for the tips/advice.

Regards
IMP49
 

A:Plugging in and unplugging a usb device

Read other 8 answers
RELEVANCY SCORE 72

Hi all,

My boss is in Arizona and when he plugs in cable at his sister's place, he cannot get on the internet but she can. Is there some configuration he needs to do?
Any help would be great!

A:No Internet After Plugging In Cable

By "plugs in cable" are you saying he is trying to connect to a broadband modem, router, or ?

Is he rebooting the modem or router and then booting his computer?

Is this computer usually used by plugging a cable/dsl modem into its ethernet connection or does it usually use a modem connected to a regular phone line and a dialup ISP?

Has he tried the "New Connection" wizard in Win XP?

Read other 3 answers
RELEVANCY SCORE 71.6

Everytime I plug or unplug my charger from my notebook, the brightness keeps changing?!?!?  Its very irritating and I've tried everything to try to fix it including going to the advanced power settings and turning off the "enable adaptive brightness."  Nothing has worked, please advise.

Read other answers
RELEVANCY SCORE 71.6

Hey guys. I ran into a little problem recently, and would like to share it.
I know it is supposedly ok to plug USB cables in and out while the computer is on, but, to be safe I have always gone through the Safely Remove Hardware icon.
For some reason, though, I have always felt it is safe to just plug sound devices in and out with no regard to whether the computer is on or not. Have done this for years.
However, I noticed a few days ago that one channel of my onboard sound line input had quit, on my newest MB. I did not realize this for awhile, because somehow the system had just rerouted the one channel into both sides, when writing to the CD or DVD. (I noticed that Joe Walsh appeared to be playing an unplugged guitar on the Eagles Hell Freezes Over concert after transferring from my old VHS tape to DVD, even though both speakers were working! LOL)
Anyway...I fixed the problem by just installing a sound card. (by the way, even a cheap $14.00 sound card is at least as good as most onboard sound: mine sounds much better than the original.)
So, would you guys advise having the computer turned off, even to plug in headphones, for instance?
 

A:Plugging/unplugging sound devices

No, 1/8" jacks can freely be plugged/unplugged while the computer is on, and when you're outputting sound.
As to why the jack went dead, cou÷d've been just natural death of age, removing the plug at an extreme angle and damaging the jack, etc...
 

Read other 1 answers
RELEVANCY SCORE 71.6

My problem is this, my motherboard is Biostar TP67B and I have downloaded the sound drivers from the manufacturer website which is realtek high definition audio.However, If i had left my headphone plugged into my front panel jack and when I restart my computer, the headphone icon keeps flickering saying its plugged and unplugged constantly when it is in fact plugged in. I had tinker around a little bit and I have no idea how to fix this problem now. Its going bad to worse as it unplugs itself randomly now. I'm trying to go for a full reinstall of my sound drivers.

A:Headphones Plugging and Unplugging constantly bug

Have you tried a different headphone? Maybe the headphone and not the PC or headphone jack.

If not the headphone, check the connection from the front panel at the motherboard, May be a bad connection there. Reseat (unplug then plug back in) the connector at the motherboard. If it still has problems I would suspect the front panel headphone jack, or the wiring.

Read other 9 answers
RELEVANCY SCORE 71.6

Hi, just bought the 2-1 laptop last week. I want to enable a notification sound while plugging in the charger and also when I'm unplugging it. I've checked the device sound properties but don't seem to find it. Please help ! vsen

Read other answers
RELEVANCY SCORE 70.8

I want to disbale the beep tone that sounds when plugging / unplugging the charger. I tried all the methods I could find online, but either those options are not available in this model or did not work. Please guide me in this regard. Its really annoying and distracting in a library or classroom setting. The OS I am running is Windows 8.1.

Read other answers
RELEVANCY SCORE 70.8

Hello, I've noticed that my computer crashes everytime i unplug or i plug in and USB drive. Today I bought a new USB mouse and when I connected it no crashes were seen, but when my pc installed the last driver, the BSoD appeared once again. I'm using Win7 64b and I really don't know what can I do, I've tried everything like uninstalling all USB drivers and recreate the INFCACHE.1 file, but still nothing. What can I do to solve this?
Thanks in advance.

A:BSoD when plugging/unplugging USB and when installing USB drivers

1) Does it happen with all usb devices or only the mouse?
 
2) Does it happen with all usb ports?
 
3) Does it happen in safe mode?
 
4) Look in device manager - are there any yellow or red symblos?
 
5) Download and install the newest chipset driver for your system. If it's a laptop, get it from the website of your laptop manufacturer. If it's a desktop, you can get it from either the desktop or the mobo manufacturer's website.
 
6) Look for a bios update.

Read other 5 answers
RELEVANCY SCORE 70.8

Hi. I have problem with my mouse and keyboard, they are unplugging. I read many tutorials here, but nothing helped me. Mouse and keyboard are randomly unplugging and plugging, but after this they are unplugging and I must restart computer. Its ridiculous because usb headphones are working. Problem started when I had Windows 8.1, after I formated to 7, now I have 10, and problem is still. I tried some other mouses and keyboards, but didn't helped. I changed some hardware, but didnt helped too. I found something strange. My standard mouse and keyboard are turning off and I must restart computer, but new set is unplugging and plugging sometimes before turn off. Help me please (sorry for my english)

My pc:
cpu: i7 2600k with box cooler
mobo: Asus Maximus IV Extreme-z (before I had ASRock p67 pro3 b3)
gpu: Gtx 660 Msi (before Radeon R7 260x oc)
hdd: Seagate ST1000DM003 and Seagate ST500DM002
psu: Thermaltake smart se 530w (before chieftec gpa-500s8)
case: SilentiumPc gladius 800
ram: 6gb - 2x2gb samsung 1x2gb kingston
 

A:Win7/8.1/10 Mouse and keyboard is unplugging and plugging

Have you made sure that you have the latest drivers for your motherboard? Also what keyboard and mouse? And are you getting any notification on screen when they disconnect?
 

Read other 2 answers
RELEVANCY SCORE 70.8

Is it safe to unplug my mouse and then plug it back in again into it's USB port without shutting down my laptop?

Is it safe to plug in my laptops power cord while my laptop is running without shutting down first?
 

A:Plugging in and Unplugging cords while laptop is running?

Yes and yes, except if you are going to unplug the power cord do it from the wall socket first and be sure you have plenty of charge on the battery.
 

Read other 2 answers
RELEVANCY SCORE 70.8

Hi all,

Acer 7740g, Windows 7 HE.
I have this annoying problem that when my AC power is plugged or unplugged it makes a beep.
Muting the sound completely helps, but that's sometimes not an option.

I tried the following and no luck:

Editing a registry entry HKEY_CURRENT_USER\Control Panel\Sound\Beep and changed it to "No".
Uninstalling the Beep device from my device manager.
Turning off my pc speaker, unfortunately, I didn't find where I can disable it.

My sound card drivers are: Realtek 6.0.1.5969

Anyone has another idea?

Thanks.
 

A:Annoying beep when plugging/unplugging AC Power

This forum is for "Business Applications", not hardware problems.
Please post on the correct forum which is "Hardware" here: http://forums.techguy.org/19-hardware/
 

Read other 2 answers
RELEVANCY SCORE 70.8

Hi all,

Acer 7740g, Windows 7 HE.
I have this annoying problem that when my AC power is plugged or unplugged it makes a beep.
Muting the sound completely helps, but that's sometimes not an option.

I tried the following and no luck:

Editing a registry entry HKEY_CURRENT_USER\Control Panel\Sound\Beep and changed it to "No".
Uninstalling the Beep device from my device manager.
Turning off my pc speaker, unfortunately, I didn't find where I can disable it.

My sound card drivers are: Realtek 6.0.1.5969

Anyone has another idea?

Thanks.
 

A:Annoying beep when plugging/unplugging AC Power

Read other 8 answers
RELEVANCY SCORE 70

I have the Hyperx Cloud and the microphone easily unplugs from the headphones so that you can choose to not have a mic some times. While I was talking with my friends on skype and needed to mute the mic quickly so I just pulled out the microphone and when i plugged it back in it didn't work. I have googled many solutions but nothing seems to work.
 

A:Simply unplugging my headphones and plugging them back in seemed to break them. HELP!

Do the speakers still work after you have unattached /reattached the mic?

Presuming you are running Windows (as you haven't specified)

Open control panel, then open Sound (depending on your OS and view options you may need to click on the Hardware and Sound option first or similar)

In the sound window, click on the Recording tab.

With the Mic attached how many devices do you see?

Is the Mic on your headset set as Default?

If you remove the mic and reattach (with the sound window open) does the mic get recognised and show back up in this list?

Does it remain as default / enabled?
 

Read other 1 answers
RELEVANCY SCORE 70

I was wondering if anyone is familiar with a method to enable sounds for when you plug in or remove a charger connected to your laptop. It is not a problem with my pc, but is an option that is not available for me which i would like to install to let me know if i accidentally unplugged the charger, particularly if I'm working on a full-screen feature. Any help would be appreciated.
I have Windows 7 home Premium 32-bit installed.

A:How to enable sound when plugging/unplugging charger for laptop.

In the System Sounds, there is an option for device connect or disconnect. This will probably do what you want. You will have to assign a sound for those functions.

The System Sounds panel can be accessed from Start/Control Panel/Hardware and Sounds. Click on "Change System Sounds".

Read other 2 answers
RELEVANCY SCORE 70

Hi All! Been a while since I've posted, but sitting here reading other's posts, I almost forgot why I logged in!

I have a weird problem with my computer.....a little background:
I didn't turn the computer on for a LONG time....perhaps a year, so one day, I decided to boot it up and it won't boot past the post! So I replaced the MB battery, checked the power supply, replaced the memory...and it booted. But then, I turn it off, and it won't boot again...same problem with it not booting past the mem. post. So being that it was an old computer, I figured I'd just build myself a new machine and use the hard drive as a slave. There are programs on the drive that I want to use that I cannot replace! Well, I tried doing that, but the new computer won't see the drive....it won't even boot with it plugged in. So....

I take the hard drive to another machine that I know works fine, and it boots. Problem solved....so I thought. I turn it off, and try and turn it back on.....nothing.....no beeps, no post....nothing. So I tried changing the power supply, and plug all back in, and it boots. Turn it off, nothing. Long story short, if I unplug the motherboard power cord from the board, and plug it back in, it boots, but if I turn it off, I have to repeat the motherboard plug thing to get it to boot again. I have had the drive checked for viruses, and it's clean.
I have to admit, I am stumped! Any ideas? Any suggestions would be greatly appreciat... Read more

A:Computer won't boot without unplugging and plugging motherboard power

Read other 6 answers
RELEVANCY SCORE 70

I have a Dell Vostro 1400 running Vista Home Basic and have had two periods in the laptop's existence where it would mysteriously freeze. You could see everything on the screen, and the power lights were on, but it would not respond except to a hard reboot by holding the power butting down for 5 seconds.

I am going through one of those periods now, and have discovered that the problem happens when I am either plugging or unplugging the AC power adapter, but don't know why. I have been all over the web for a solution, and while it does seem I am not alone with this problem, I have not read a sensible solution yet. My favorite bad answer is "don't unplug your laptop when it's on."

So, does anyone know what it could be? I wanted to look at system logs, and so went into the Event Viewer not even sure what to look for, but didn't see anything that looked like a likely culprit. Please help!

Thanks,
Neil
 

A:laptop freezes when plugging and unplugging AC power adapter

being a member of the Dell Community Forum, I looked there and found this

A lot things happen in Windows when inserting the AC power adapter.

To check if it's a classic CPU lock-up: repeatedly press capslock. If the capslock light doesn't change, there's no live in there.

Assuming the CPU is locked up: It's possible there's a log entry in the system log just before the AC power adapter is inserted. These entries give clues where to look, just before things went sour.

Next try to reproduce it in Safe Mode (press F8 when Windows start) If it's also in Safe Mode - try running an alternative OS (no need to install)

If the problem also shows up here - most likely it's a hardware issue.

Otherwise it's a windows issue - might be driver related.

the "alternate OS thing is a link on the forum web site. Click here to go to that site.

Hope this is some help... Raybro
 

Read other 1 answers
RELEVANCY SCORE 70

When I plug in my laptop to charge the laptop turns off, and when I unplug the charging cord from the computer it turns off. Does anyone know whats going on? I have an Inspiron 15 5558.

A:Laptop turning off when plugging or unplugging in charging cord

Hi DNGUYEN2252,
Are you using an original Dell OEM Adapter? When you plug in the adapter to the system, does the adapter stay firm or does it fall off easily? Is the adapter frayed? Is there any damage on the system?
Does the adapter led stay on and stable or does it go off when connected to the system?
Disconnect the adapter and battery and press and hold the power button for 30 seconds to release any static power. Then try connecting with the adapter only / battery only.
I would first suggest you to try with another power adapter. The current one in use might be shorting the system and hence the system powers off.
If another adapter works fine, then replace the adapter. If the other adapter  also exhibits the same behavior, then replace the DC port - this is the part you would need - http://bit.ly/2kZR8go
If nothing works, I would suspect a faulty motherboard. 
If there is no warranty, then you could contact our team to get a quote for a paid service call - http://dell.to/1vnT6CQ
Also, please click my DELL-username and write me a private conversation with the service tag and your contact details(Name and Email) for case records.
Let us know if you have any other queries.

Read other 1 answers
RELEVANCY SCORE 70

Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn?t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.

Currently I am seeing these BSODs:


I am getting one when just trying to start and run windows I am getting a BSOD about memory management.


If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.


Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.

I was able to run a mem test on it at one point and it said everything was fine. I would appreciate any help or advice you can give me since I can?t even get to a command prompt or safe mode.

A:Multiple BSODs after unplugging and plugging in flash drive.

If you would like for us to be able to effectively help you, we will need you to follow the Blue Screen of Death (BSOD) Posting Instructions Please be sure to do each step, as outlined in the tutorial. By doing this, we will have the necessary information to help you.

Read other 1 answers
RELEVANCY SCORE 69.2

the subject says it all.brand new t520 with optimus (nvidia+intel) display adapter, 1920x1080 screen.whenever i plus in or unplug power, the display blanks for about 2 seconds, then flashes back on.the problem occurs whether the bios setting is integrated, dicrete, or optimus, and th problem occurs even if the display settings are the same in power profile for AC and battery. is this normal? it is very BAD. thanks in advance.george













Solved!

Go to Solution.

A:t520 display blanks and flashes when plugging/unplugging ac power

hey ghoffman,uninstall the current graphic driver that you have. let windows install its own generic drivers.once generic driver has been installed, test again and see if the problem occurs. If it does not, continue by going to our support site via http://support.lenovo.comdownload the latest graphic driver for your unit, install it and test again.





WW Social MediaImportant Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! Follow @LenovoForums on Twitter!Have you checked out the Community Knowledgebase yet?!How to send a private message? --> Check out this article.

Read other 5 answers
RELEVANCY SCORE 69.2

Urgh. Typical.

Install new case fans after moving 2 HD cages from the front of Corsar 600T case.
Check they run ok. Fine.
Put HD cages back in, one in the space on the bottom of the case beside the PSU.
Fight with the cables to get the HDs connected and the modular PSU cables back into the PSU.

- Attempt to power on. Nothing.
- Check cable, try another power cable. Nothing.
- No fans, no lights, nothing.
- No 'electrical sound' when flipping the switch on the back of the PSU.

Seems I have a 7 year warrant on the PSU and its only about 3 years old. But Corsair RMA system insists that you "try another PSU to verify the problem is the PSU" which is fair enough so off to buy another PSU, probably another Corsair. Hope the RMA system allows for refund rather than replacement, otherwise I'll have 2 PSUs which isn't really much use. I guess I can use this as an opportunity to upgrade to a bigger PSU since 7970 CF, 3 HD, 2 SSD, i7 2600K @ 4.7Ghz, a powered device connected to almost every single USB port is probably getting towards it's limits. I can then stick any replacement HX750 on Ebay or something...
 

A:Corsair HX750, dead after reseating and unplugging, re-plugging cables

Arris said:





Seems I have a 7 year warrant on the PSU and its only about 3 years old. But Corsair RMA system insists that you "try another PSU to verify the problem is the PSU" which is fair enough so off to buy another PSU, probably another Corsair.Click to expand...

I didn't have any fuss with my Corsair RMA request, when I mentioned using a Power Supply Tester.
 

Read other 3 answers
RELEVANCY SCORE 68.4

I went to start up my computer earlier and it would not boot up properly. Looking online someone mentioned it could be faulty memory. So one by one I took them out and started up the computer to see if it would boot with potentially removing a faulty memory stick. None of them seemed to be causing a problem so after installing all the memory back properly, neither of my monitors no longer receive a signal.
 
I have tried reconnecting everything and checking all connections. I have tried turning off the computer and extracting the CMOS battery for 30 seconds. Not sure what they next step in solving this is.

Read other answers
RELEVANCY SCORE 67.6

Just noticed this whenever I plug or unplug the charger. The laptop lags for 1-2 seconds before returning to normal. This is noticeable when playing games or watching videos. Haven't seen any abnormal drops or spikes with the temperature of the CPU, GPU and HDD which would suggest a hardware issue. Tried doing this while running 3DBenchmark, and there is a huge drop in FPS, from 130-200fps down to almost 16fps esp. when unplugging the charger.Is this normal?

Read other answers
RELEVANCY SCORE 63.6

Last week i decided to move my computers (2). Internet was working fine before i did this. After I moved them I havent been able to connect except for a usb cable. Both computers are using the Windows Vista home premium 32 bit. Before all of this happened I had 2 computers and an Xbox 360 all connected. I have tried everything I can think of and none of it worked. I have charter cable internet and they were able to get on the internet fine using the ethernet cable. when i go to ipconfig/all it gives me a 169.254.216.245 IP address. I have read several places where people have been having problems with this but all the suggestions for them nothing worked for me! Please help

A:Cannot connect to internet using Ethernet Cable but can connect with USB cable

Do you connect via a modem or a router. Did you try the release/renew options when you were in ipconfig ?
If you use a router check it to see if it's still giving out IP's automatically.

Read other 1 answers
RELEVANCY SCORE 61.6

Is it a good idea to unplug my cable modem if Im going to be away on vacation? Is it good to unplug it period? Thanks
 

A:Unplugging Cable Modem

Read other 8 answers
RELEVANCY SCORE 60.8

Windows 7 x64 pro?
- the original installed OS on the system? yes

- OEM = came pre-installed on system

- What is the age of system (hardware)? 2.5 yrs
- What is the age of OS installation 2.5 yrs (have you re-installed the OS?-NO)
======================================================
Twice today when debugging network issue, I unplugged ethernet cable from router and got BSODs. I ultimately swapped out the router to get network back up.

I have lost network connection almost daily, and cannot disable/enable the adapter. Must reboot to fix... and reboot takes 10-15 minutes before shutdown.

FWIW I am also having right-click Win explorer issues as well. Don't know if any of these are related.

Many thanks

A:BSOD when unplugging ethernet cable

All of the Driver power state crashes were related to theCitrix Network Enhancer Miniport or Cisco VPN client. Yours is from 2008. Update to something win 7 compliant.
Other old drivers

Code:
tifsfilt.sys 8/29/2007 8:37:29 AM fffff880`05fa8000 fffff880`05fbf000 0x00017000 0x46d56889
timntr.sys 8/29/2007 8:38:23 AM fffff880`01a7d000 fffff880`01b2d000 0x000b0000 0x46d568bf
tdrpman.sys 11/12/2007 9:36:33 AM fffff880`01cdb000 fffff880`01d6f000 0x00094000 0x473856e1
snapman.sys 11/22/2007 4:19:33 AM fffff880`01d77000 fffff880`01db2000 0x0003b000 0x47453b95
dne64x.sys 11/10/2008 9:01:24 PM fffff880`051ad000 fffff880`051d9000 0x0002c000 0x4918d964
SABI.sys 5/28/2009 2:38:02 AM fffff880`030bf000 fffff880`030c9000 0x0000a000 0x4a1e314a
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.


-... Read more

Read other 1 answers
RELEVANCY SCORE 60.8

Hi, 
Firstly i using "LG" Television 32' , when i plug HDMI cable and start my PC the sound work fine :D ... but when i remove HDMI cable and plug for example (PlayStation 4) and remove it from (PlayStation 4) and plug HDMI to PC the problem coming , There is no sound ! what i do for sound back ... i restart PC and sound back that's ok ! but it's annoying every time i must restart !!!

please help me this problem face me since 6 months no solution's

"WARNING" 
•I have try change many TV's its same problem
•This problem coming after my AMD card stop working and give me black screen , And now i am using Intel video card (external card)
•I have tired install drives
•I tired manage devices trick 
•I have change HDMI cable many times
"PC INFO"
PC : Dell XPS 8700
Windows : Windows 7 Ultimate

"Pictures May Help You"


and i am sorry my English not good :(

Thnx . 

Read other answers
RELEVANCY SCORE 60.4

Hi guys,

I just bought an Intel NUC D34010WYKH and installed Windows 7 x64 and all Intel drivers needed. I want to connect to that Computer via Windows Remote, so I don't need a monitor connected.
But every time I disconnect the screen a bsod occurs. I attached the necessary files for you in a zip. Could you please take a look at these?
I could not note down the message because I had no monitor connected and the system restarts immediately so there was no time to plug in the cable again. I hope it's all in the zip.

Thank you so much in advance!
muffn

A:BSOD after unplugging HDMI-Cable from Intel NUC

From what i could research; it appears the bsod is pointing to your onboard graphics driver. I would go to your motherboard manufacturers site and download the latest drivers. Then; uninstall the drivers that currently exist; and reinstall the drivers that you downloaded. Try that out and see what happens. Post back if no results.

Read other 4 answers
RELEVANCY SCORE 60.4

This has happened numerous times before, when I accidentally yanked out the optical audio cable connected to my headphones, and my PC shuts itself down. This is usually during an active game or program, and it won't always shutdown the pc if it happens but after the 2nd or 3rd time of doing it, my PC shutdown (with a Windows shutting down screen).

Before I've always been able to start up again without any issues, but this time when I booted back up I get an error at POST screen which says "USB Device Over Current Status Detected !! Will Shut Down In 15 Seconds". So I tried every simple thing I could, unplugging all usb cables (3 in the rear usb ports) and disconnecting the front ports from the mobo.

I do recall having some trouble with the motherboard's usb ports before, so I really hope this isn't because I have a faulty motherboard and I've just finished it off after this.

Specs:
Asus P8Z68-V LK
Intel Core i5-3570K 3.40 GHz
Silencer Mk II 950watt PSU
8GB DDR3 RAM
2x GTX 570 SLI
Tritton Pro Headphones (with external power source)
 

Read other answers
RELEVANCY SCORE 59.6

I plugged in my laptop to my tv with an HDMI cable, when I unplugged the HDMI cable all my desktop icons disappeared. When I click the desktop folder everything on my desktop is in the folder but it doesnt show on the desktop. I plugged my laptop back into the tv and the icons reappear on the desktop. I unplug again and they disappear again. What do I do to fix this?

A:Icons Disappear off Desktop after unplugging HDMI cable

Do they come back if you restart the computer?

Read other 4 answers
RELEVANCY SCORE 59.6

hi,
after i turned the computer off by unplugging the power cable by mistake while playing Counter-Strike: Source (which made windows turn off unexpectedly) i keep getting random BSOD. TY

INFO:

1-never had a bsod for 2 years.

Question:

1-will re-installing windows fix it ?

A:BSOD after unplugging power cable by mistake while playing Css.

Security App

Crashes indicate Avira being a possible cause. Remove Avira and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials and Malwarebytes, both recommended from a strict BSOD perspective.

Microsoft Security Essentials, Free antivirus for windows
Malwarebytes Anti-Malware Free



   Information
DO NOT start the free trial of MalwareBytes. Deselect the option when prompted.

Please run these tests and report back the results

1. SFC /scannow to check windows for corruption - SFC /SCANNOW Command - System File Checker
2. Disk check for errors on the hard drive - Disk Check
3. Troubleshoot applications by a clean boot - Troubleshoot Application Conflicts by Performing a Clean Startup
4. Memtest86+ paying close attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure

Read other 9 answers
RELEVANCY SCORE 59.2

Hi,

I am not able to connect internet via wifi (although I can connect to the router). I am able to connect to internet via plunging the cable.

I see that yellow triangle with "!" mark in the internet connection.

Please help!!

Shailesh Jajotar
 

A:Cannot connect Internet through Wifi but can connect via Cable

Read other 8 answers
RELEVANCY SCORE 58.4

I am trying to figure out if I have a faulty hardware or if there is a software solution to this issue.
My laptop has a 4K touchscreen and has only Intel Graphics 520. It has i7-6500U CPU, 8GB RAM and 256GB Sandisk Z400 SSD. Running Windows 10, latest updates etc.
Every time I disconnect the power cable and it switches to battery, the screen starts glitching and switches between regular screen to one with vertical green and red lines (still readable but heavily distorted). It usually stops glitching after a minute or two.
This is what I did/try so far:
- updated BIOS
- updated SSD firmware (laptop was randomly freezing for 30 seconds prior to that)
- tried 3 different Intel drivers (even manually installed latest one that refused to automatically install)
- disabled dynamic brightness settings in Power Options
- forced maximum graphics performance when on battery in Power Options
Nothing works, the screen is still glitching. At this point, I suspect perhaps there is some hardware issue with the graphics (motherboard).
Any other things to try?

Read other answers
RELEVANCY SCORE 57.6

I got a new case for a friends computer today, and set about removing motherboard/hardware from old case to install in new machine. While unplugging the ribbon cable connected to the 3.5 inch floppy drive from the motherboard, I ran into dificulties getting it to disconnect. I must have tugged a little too hard because the plastic surrounding the pins on the motherboard broke off on one side, though the pins did not seem to be ruined. I thought, "Well that sucked, hope it turns out ok." I did notice that 1 pin was not present on the motherboard like 3 pins in, but hoped maybe that was standard. Now after installing everything into the new case, and booting up the 3.5 inch drive is not being recognized. I don't know for certain if the drive was being recognized before. It is not recognized in cmos. Probably stupid question, but is it certain that I broke the connection on the motherboard?
 

A:Solved: Broke plastic around 3.5 inch drive ribbon cable while unplugging from motherboard!?

Read other 8 answers
RELEVANCY SCORE 57.2

I'm having a tough time diagnosing an issue a colleague of mine is having. Basically the problem is that whenever this user plugs in a LAN cable his computer would blue screen with the error 0x40000080. After analyzing the crash dump all signs pointed to "e1e5132.sys" driver for Intel® PRO/1000 Adapter NDIS 5.1 deserialized driver. A quick google search revealed a lot of other systems experiencing the same problems so we decided to install the latest drivers from both Lenovo and Intel as the system was previously using Factory Image software. The updates had no bearing on the blue screens as it continued to occur so we tried to re-install the operating system "Windows XP Pro" and saw the same problem creep up. This machine is a Lenovo T-61 so we contacted Lenovo and they replaced the system board citing bad hardware. The next day the same thing happened, in fact it happened to 3 machines within the same department who were all purchased in the same bulk to the best of my knowledge. This user was so frustrated that we switched him out with a brand spanking new Lenovo T-61 right out of the box. The only remains from his old systems were Documents copied over and E-mail .pst files. About a day later "Boom" blue screen again, same culprit according to the Minidump. I want to think there is some files on the system that possibly got copied over that were corrupt but frankly I'm running out of options on this one.I would appreciated some assistance... Read more

A:Stop Code Upon Plugging In Lan Cable

Read This...and specifically, make certain to follow These Requirements.Post back and let us know if you are now able to connect to the LAN without the bsod. Thanks!

Read other 2 answers
RELEVANCY SCORE 57.2

The title is somewhat misleading. This event happens maybe once every 20 plug-in attemps and only when I'm slightly up or down from a straight push in.
The device doesn't matter.
The port in question is one of four on the front panel of the case. The rebooting only happens with one port. Never had a problem with the other three.
I haven't pulled the front of the case because it happens so infrequently.
However, I would like some suggestions on the possible cause.

A:System Reboots When Plugging In A USB Cable

As the doctor says, if it hurts don't do it. It sounds like a bad port. Stop using it.
Antec sells the replaceable front port assemblies. Check their website and see if they have one to fit your model of case. They range in price from about $6-$12. It's not likely you'll be able to repair the port.

Antec Spare Parts Link

Read other 5 answers
RELEVANCY SCORE 57.2

Hye guys, got a quicik question to ask...

I just moved back up to school and I just didn't feel lik lugging my TV all the way here. Didn't think I'd miss watching it.

Its been 12 hours and I need a TV again haha

So...

I have cable through my coaxial running into my room, but the only video output device I have is my LCD monitor that has both DVI and D-SUB inputs. I also belive my motherboard has an RCA video IN as well.

Basically, I wan't to be able to watch TV on my monitor/computer.

Any help would be great

thanks!
 

A:Plugging coaxial cable into LCD Monitor/PC

Read other 10 answers
RELEVANCY SCORE 57.2

i have two laptops,

both are connected by wireless to a speedtouch router. Also, i used to have them both connected by lan cables to a netgear hub which allowed ethernet. Now that i have them connected to the wireless, when i plug in the lan cables between the laptops and the netgear router, the wireless no longer works... any ideas? thanks.
 

A:plugging in LAN cable destroys wireless

Read other 13 answers
RELEVANCY SCORE 56.8

I just reinstall my laptop today. Now i am not able to connect to the internet with the cable, but my wireless is still working fine ... Help me pls !

A:Can't connect to internet with cable

go into network and sharing center, over on top left, change adapter settings, right clik Local Area Network and choose enable...

Read other 6 answers
RELEVANCY SCORE 56.8

hello
I'm desperate because since yesterday I suddenly cannot connect my laptop to the internet via cable - have no idea what might cause the problem! I have not installed any new programs, etc; just get the message "limited or no connectivity" even though I connect with the same cable to the other computer no problem. renewing my IP by clicking "repair" does not work either, it just says "windows could not renew your IP address" what can I do???

PLEASE HELP!!!
 

A:I can't connect to the internet via cable

Double post removed
 

Read other 4 answers
RELEVANCY SCORE 56.8

Hello guys, i can't connect to the internet via cable! there's no lan cable icon even, i downloaded all the hardwares that are for this cause! from the hp website and installed them, but still nothing have been changed. i even re-installed it from the recovery manager and restared, but still no icon and when i plug in the cable nothing happens. i realy need ur help guys i dono whats the problem. i was using the cable before i restared and it was working good!

A:Can not connect to the internet via cable..

Click start
Click Control Panel
Click Network and Internet
Click Network and Sharing Centre
Click Manage Network Connections
You should see something like this:~


Above you see Local Area Connections
Right click on it and click on enable...
If that don't help let us know...

Read other 8 answers
RELEVANCY SCORE 56.8

I recently started adding many upgrades to my computer. One of the things i decided to do was connect it directly to the internet through a LAN cable rather than using wireless internet. I bought a network cable and connected it from my computer to my modem, which already has another computer connected to it through a LAN cable. Unfortuanately, my computer cannot connect to the internet using the LAN cable though. I hooked it up, the router recognizes my computer as well as the other one connected to it, my computer says its connected at a speed of 100mbps but it still won't get on the internet. Please help.

Thanks,
Steven
 

A:Can't connect to the internet using LAN cable.

Read other 7 answers
RELEVANCY SCORE 56.4

Hi.. think I might a problem with my hardware here.. sometimes when I plug in my RJ45 cable, the screen goes black but it's still on as I can see the outline of my windows. This happened before when I plugged something into the USB port next to it. I took the RJ45 cable out, and the screen was fine again..

Anyone have any ideas? Is my laptop deteriorating? hehe

Model: IBM R31
Operating: Windows XP Professional
 

Read other answers
RELEVANCY SCORE 56.4

Hi everyone!

Recently I bought a new Full HD TV, it's a Samsung LE40B530. I'm trying to get this TV connected to my Compaq Presario CQ50-100ED laptop from hdmi output to the hdmi input on the TV. The videocard is a GForce 8200M. The latest drivers are installed.

The problem is that when I connect the two, the laptop screen goed black and the TV says 'No signal.' Pressing the FN F4 does not work. Also I'm not able to get back into vista on the laptop. The screen stays black even after unplugging the HDMI cable. I have to hold the power button to switch the laptop off. Not a good thing.

Any tips or advice?

Thanks!

A:Black screen after plugging in HDMI cable

More info, are you using the right input screen on your Samsung? Why a laptop? Does anyone use a tower computer anymore??

Read other 1 answers