Over 1 million tech questions and answers.

Solved: can use ethernet but not wireless!

Q: Solved: can use ethernet but not wireless!

Hi all
Im not compleatly computer illeterate but basically if something goes wrong im buggered!

latest problem is that I was connect to orange broadband (live box) with numerous problems, the main one being that i could only connect using ethernet(?) after numerous phone calls they sent me to 192.168.1.1 or something to that effect and had me change a few things around and hey presto it worked.

problem is I then moved and am now trying to connect to my very unhelpful flatmates O2 wireless box ii. and am back to only being able to use a cable to connect. I tried the previous address that orange gave me but im guessing it only works for them as it wont even display the page now.

i'm pretty sure the problem isnt the O2 box as my flatmate and friends have no problems connecting and i cannot connect to any wireless networks (macdonalds WiFi included lol)

so where do i go from here?

RELEVANCY SCORE 200
Preferred Solution: Solved: can use ethernet but not wireless!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: can use ethernet but not wireless!

Read other 11 answers
RELEVANCY SCORE 52

I was reading this thread on the steam forums and I know I have a realtek ethernet nic in my pc. I also have bad performance in tf2

My pc is connected to the internet through my wireless network though, which makes me think the above fix wouldn't work for me. Am I right, or does my wlan card interact with the realtek ethernet nic?

BTW, I'm posting here because most people on the steam forums don't seem to know what their talking about, at least when it comes to hardware.
 

A:Solved: Wireless through Ethernet NIC?

Read other 8 answers
RELEVANCY SCORE 52

I heard someone ask a question to a kid who knew a good amount about computers. The question was "If I have an empty ethernet port in my computer, could I configure my 360 to use my wireless internet?" The kid said yes, talked about some tool that is built in on XP and Vista. I missed the tool name, but instantly thought I would love to move my PS2 out of the basement, and into a room where it would actually get played.

So, the computer is connected to the internet through a simple USB wireless internet... stick. I was wondering if I plug my PS2 into the empty ethernet port in the back of my computer, how would I configure it to use the wireless network that is being picked up by the USB wireless card? I'm using Windows XP.

Thanks for the help.
 

A:Solved: PS2 to ethernet to wireless?

Read other 16 answers
RELEVANCY SCORE 52

My old Westell DSL modem died, and Verizon sent me an Actiontec model GT704WG. I have two desktops, both connected to the modem by ethernet cable, and a laptop, which uses the wireless capability of the modem. This worked fine with the old modem (until it died). I connected the cables to the new modem exactly as they were connected to the old modem. I'm now browsing happily on the laptop (i.e., wirelessly), but the desktops cannot connect to the Internet. Strangely, when I go to 192.168.1.1 on one of the desktops, I get the setup page for the old modem rather than for the new one, even though the old modem is now sitting in a box. The status of the lights on the modem is as follows:

power - green
DSL - green
Internet - green
ethernet - not lit (all four of them)
USB - not lit
wireless - green

All computers are running Windows XP, SP-2.

How could wireless be working, but not ethernet? Usually it's the other way around!

Do I, perhaps, have to connect the modem to one of the desktops by USB cable? My understanding is that it's not necessary. If it is, do I need a driver from Verizon? They did not send a CD with the new modem. Is the driver available on the Internet somewhere?

Thank you!!
 

A:Solved: wireless OK, but no ethernet

ethernet - not lit (all four of them)Click to expand...

I take that to mean the ethernet ports are bad (have you tried them all?) or the cables are bad.

This may be the correct user manual: http://business.verizon.net/Help/dsl/Default.aspx?case=c13947

Try the USB port unless your computers are:

"Note: USB LAN port is not supported with Microsoft Windows
NT 4.0, Windows Vista 64-bit, or Mac OS."

That unit is a modem/router combo. The USB port is not to the modem part; it is a special LAN port, so no driver or special software should be needed.
 

Read other 3 answers
RELEVANCY SCORE 51.2

I am staying at the university accommodation and I get my connection for the internet via an Ethernet cable. I have another laptop and I want to connect it to the internet too but I want to do it via wireless. Is there a chance I can bridge the cable connection on my old pc so that I can connect with my new one but without buying any extra hardware such as switches or routers? Btw the connection of the university gives me only one IP address. I just want to turn my old pc into a wireless router without any additional hardware. If anyone knows a way to do that please post me the answer. Thanks.
 

A:Solved: Ethernet to wireless Bridging

Use ICS on the old PC. As long as it has a wired and wireless connection, you should be able to create an Ad-Hoc network between them wirelessly.

ICS - Making the Wireless Home Network Connection in Windows XP Without a Router
 

Read other 3 answers
RELEVANCY SCORE 51.2

I successfully set a static ip address for my ethernet card for remote access. i tested my remote access form a different device and it works. I then tried to set a static ip address for my wireless card which resulted in an error message. I first tried to give the wireless card the same ip address as the ethernet(i only use ethernet or wireless, never both running at same time). it wouldnt work. then i tried to give it a different but usable ip address. it didnt work. i also used the same gateway and dns addresses. this is the error message im getting

A:[SOLVED] static ip on both ethernet and wireless?

Hello,

You must give them different IP address and these address must not fall within range of the DHCP server scopes. The subnet mask, default gateway and DNS can be the same assuming they are on the same subnet.

If you would like us to review the setting you'll have to post an ipconfig /all for review.

Click on Start => in run or search box type cmd press enter (run as Admin for Vista and 7). From the black screen, type the word ipconfig /all and press enter. Right click on the black screen or Command prompt then choose Select All and Paste the results onto your Post.


You should not receive that message, if so just click Yes.

Read other 2 answers
RELEVANCY SCORE 51.2

My guess is that the motherboard's integrated ethernet controller is bad. I remember Bob Cerelli saying that when a bad controller prevents integrated and PCI networking from working sometimes USB will work. That seems to be what is happening here.

And, no, I have no explanation for getting an IP configuration on the ethernet when the USB adapter was present. Was it a valid configuration from the router?
 

A:Solved: New install no ethernet, but can get wireless

?

Are you replying to another post?
 

Read other 2 answers
RELEVANCY SCORE 51.2

I have a Lenovo 3000 N200 with Windows XP purchased nine months ago. Both the wireless (Broadcom 802.11g Network Adapter) and ethernet (Broadcom NetLink Fast Ethernet) were working perfectly until two days ago. I have been unable to repair the ethernet. My ISP provider had me check ipconfig/all and concluded that I had a faulty network card, but I wonder if there could be something amiss with the configuration. Please help me out! p.s. I may have been guilty of having both wireless and ethernet enabled at the same time.
 

A:Solved: Wireless works but ethernet does not

Read other 16 answers
RELEVANCY SCORE 51.2

Hi i hope somebody can help, about a month back my internet was running really inconsistent (one minute running fine the next really slow), then the other day it just wouldn't connect, message read : "Internet Explorer cannot Display the WebPage" when i click Diagnose Connection Problems, it says DNS may be down. Also MSN Messanger wont connect either and the errors from the Diagnosis from that were the DNS, and Key Ports. The only way i can connect is via the ethernet cable, any idea what is the problem? Im sure it is some thing very simple but my computer skills are minimul. Thankyou for taking time to read this and hopefully help.
 

A:Solved: Connect via ethernet but not wireless

Read other 7 answers
RELEVANCY SCORE 51.2

This is a 2week old laptop is able to connect through the internet through my school's and home's wireless network. Plus I can use the school's ethernet cable, no problem. However, my laptop does not recognize my laptop in my home's network. It always responds (ethernet cable connected) as a unidentified network). I have tried the using several methods that have worked for people but none of these have worked for me:

1) I've made sure the wireless router firmware is up to date.
2) I've made sure the IP and DNS look ups are automatically under both TCP/IPv6 and TCP/IPv4)
3) I've turned off firewalls.
4) I've checked to make sure that my Broadcom NetLink (TM) Gigabit Ethernet was working properly.

here is my ipconfig /all & PING tests

Windows IP Configuration

Host Name . . . . . . . . . . . . : PhatLe-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : B8-70-F4-3A-D3-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::b865:8479:af87:35a2%19(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.53.162(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Defau... Read more

A:Solved: Not connecting with ethernet but only wireless

Read other 14 answers
RELEVANCY SCORE 51.2

System Info: Gateway laptop with Windows Vista Home Premium SP 1
Intel Wireless WiFi Link 4965AGN
Belkin N router

On 6/17 after downloading an update for Norton Internet Security 2008, I received the following error message:

'Failed to connect to a windows service: Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrator user, you can review the System Event Log for details about why the service didn't respond.'

In order to get rid of this error message, I performed a system restore back to 6/17, prior to the Norton update.

I have tried the following with no success:

I restarted both router and modem, checked settings on wireless adapter (both router and adapter set up to as WPA2-AES.

It keeps on stating it's connected to my network with (Unidentified Network) in front of my network name but I can't connect to IE 7 or Firefox 3.

I also cannot connect via Ethernet when turning off the wireless button (states Unidentified Network).

Any help would be greatly appreciated.

Thanks

John
 

A:Solved: Cannot Connect via Wireless or Ethernet - Please HELP!

Read other 16 answers
RELEVANCY SCORE 51.2

I need help with my Ethernet controller. i have an exclamation point that is yellow and its a code 28 and says its not installed. I dont know where to start and help is very appreciated. My computer is an aspire one D255E and i have windows 7 starter and any other information need to help me i can try and give
 

A:Solved: ethernet controller(not wireless )

Read other 10 answers
RELEVANCY SCORE 51.2

My brother has called me for help! Sadly, I'm the closest thing my family has to a computer tech - which ain't much!

Anyway, let me start by saying that I won't be able to get to his house and give you his specs until tomorrow. Still, was hoping this might be an easy fix for some of you computer geniuses on this forum.

He has had repeated problems with his Internet on his laptop being slow and/or not connecting. He has dsl from a small rural phone company - no other options in his area. His provider finally set him up with a static IP address and that helped for about six months. Then, he started having problems again a couple of weeks ago. I went out and decided his wireless network adapter, because it wouldn't work on my network either and when I plugged in a borrowed nic, it worked fine. So, I set it up at his house configuring it to his wep wireless network.

Unfortunately, while I was out of town the last few days, he's his network began slowing down again (still using the borrowed network adapter). So, he tried to connect directly into the dsl through the ethernet cord, which he was able to do just fine before I switched the network adapters. IT WOULDN'T CONNECT!

I verified that he just unplugged the ethernet cord from the back of the router and plugged it into his laptop. So, the cord and the dsl modem are both working fine. Therefore, I'm wondering if when I set up the wep on the borrowed nic, if I might have disabled something.... Read more

A:Solved: wireless okay; can't connect ethernet to dsl

Read other 15 answers
RELEVANCY SCORE 50.8

Hi,

Earlier today my wireless connection suddenly stopped working. If I plug an ethernet cable into my computer, I can still get online, so it isn't a problem with my router. When I try to connect wirelessly, I can see the network. But when I try to connect, it says "Windows was unable to connect to linksys."

This is what I get when I type ipconfig /all in command prompt without ethernet cable in:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\FirstLast>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : FirstLast-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #
2
Physical Address. . . . . . . . . : 84-A6-C8-14-08-85
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 84-A6-C8-14-08-85
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
... Read more

A:Solved: Ethernet Works, Wireless Doesn't

can we see an xirrus screen shot - see below

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc

also do a tcp/ip reset - see below
------------------------------------------------------------------------

TCP/IP stack repair options for use with Vista/Windows 7/Windows 8

For Windows Vista/Windows 7
Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box (A new dialogue box - black with white font, will appear on the screen ):​
For Windows 8
To open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.​
In the command prompt window that opens, type the following commands:

Note: Type only the text in bold and red for the following commands.
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog and press enter

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log and press enter

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log and press enter
​ReStart (reboot) the machine.

If you receive the message
The requested operation requires elevation.
Then please open the command prompt as administrator - as requested above ... Read more

Read other 3 answers
RELEVANCY SCORE 50.8

Ok so i'm going to give you all the details I can and hopefully someone will be able to help me. Recently we had a new hard drive installed in our computer becaus the old one was bust. So now everything works fine except for there is NO internet. The PC doesnt seem to be picking up my Belkin wireless card, theres no "connect to" I have no idea what to do or install and any help would be great
 

A:Solved: Ethernet controller? Belkin Wireless?

Read other 7 answers
RELEVANCY SCORE 50.8

I'm quite knowledgeable in computers, but lack in the area of networking. My friend has a job where he's on the road a lot and wants to take his xbox on the road with him. The only thing is that the wireless networks that the hotels have use the terms of agreement page and so forth. I'm sure they also monitor it with Mac addresses and so forth. He has a wireless adaptor for the xbox and takes his laptop along. He has tried bridging the 2 interfaces together, which ends up breaking the wireless connection. He has also tried to use the xbox with the wireless adaptor and that also doesn't work, I imagine because of the terms of agreement. As far as he told me he also tried to use the wireless adaptor for the xbox on the computer first and then agree'd to the terms and then moved it to the xbox and it still didn't work.

Any ideas?
 

A:Solved: Bridging wireless and wired ethernet in XP

Sorry, I guess they got it working with internet connection sharing and not using a bridge.
 

Read other 2 answers
RELEVANCY SCORE 50.8

I had a wireless network using a Netgear router, and it worked fairly well, but not great (a lot of drops). So, I changed to ethernet. Now I can get to the internet, but not to the other devices in the network. I have two laptops and a viop phone connected. The router sees each device. Both laptops are in the same workgroup (HOME). Laptop 'A' gets the error "HOME is not accessable". Laptop 'B' gets past that, but gets stuck with "//Laptop A is not accessable ,network path not found". My windows firewall is off. What else can I tell you?
 

A:Solved: switched to ethernet from wireless--not so good

Read other 9 answers
RELEVANCY SCORE 50.8

I'm looking at getting an AIO printer, a Canon MX850 to be exact. It has ethernet and I'd like to set it up with my wireless router so all the computers in my house can use it. Do I simply connect it to the router with the ethernet cable or is it more complicated? I don't have a network set up. The other computers just connect with wifi.
In case someone suggestions Canon's MX860, which is already wireless, I decided against this one after reading lots of reviews. The 850 seems to be the better choice but I really need the wireless aspect and I'd like to not have to worry about setting up a network.
 

A:Solved: Making a printer wireless with ethernet?

Read other 8 answers
RELEVANCY SCORE 50.8

My DELL INSPIRON 531S 64 BITS receives FIOS INTERNET only thru WIRELESS. but, SPEED is very low . The M”DEM IS working perfectly according to Verizon. Coaxial Cable is inserted unto COMPUTER directly from MODEM but the Computer does not detect it. Please HELP to find a solution to this problem.
Thanks in advance....
 

A:Solved: Unable to connect thru ethernet, only wireless

What is "BIOS INTERNET"?

Coaxial Cable is inserted but the Computer does not detect it.Click to expand...

Inserted where? Please explain your network more completely.

Please HELP to find a solution to this problem.Click to expand...

Which problem? You mentioned one in the thread title and two in the post.
 

Read other 14 answers
RELEVANCY SCORE 50.8

I work in small office with four users and we use Comcast as our ISP. A separate room from the office has our cable modem. The cable modem has a Ethernet cable going to a WRT54G WAN Port. The WRT54G is not being used as a wireless router.
Coming from the LAN ports is a Ethernet cable going to a Netgear switch.
The office has Ethernet ports and one of them is hooked up to a Netgear WDNR3700 wireless router. All users are utilize the wireless network to get online. There IP Address is 10.0.x.x. When I use a Ethernet cable to a computer my IP Address is 192.168.x.x.

What needs to be done so the IP Addresses of the wireless network and wired network use the same IP Address range?

Thank you.
 

A:Solved: Aligning IP Addresses using Wireless and Ethernet

Read other 6 answers
RELEVANCY SCORE 50.8

Hello,
I am trying to bridge my laptop's wireless connection with the on board ethernet.

I have a wireless router and my latptop connects to the network\internet using the wireless card.

What I would like to do is bridge the wireless connection with the on board lan so I can share the connection with my XBOX 360.

Right now I have a X-over cable connected between the XBOX and my laptop's ethernet port.

I use WIN XP Pro and simply selected the 2 connections and bridged them using WIN XP.

My laptop appears to be connected to the network as does the bridge both showing excellent strength.

Problems:
1. I can't open a web browser on the laptop.
2. I can't sign in to XBOX Live from the XBOX.

So how do I get the XBOX to access the internet through my laptop's wireless connection?

Thanks
***EDIT***
After doing more research I found this thread:
http://forums.techguy.org/networking/785156-solved-wireless-bridge-but-cant-2.html

I am getting the same thing as reported in post #22, with same exact IP 169.254.x.y

I had Zone Alarm installed at one time, but it was uninstalled about a month ago. Other than that I just have windows firewall on.

I can manually set the ip, subnew, etc for the bridge but then it won't connect, event if I use all settings from my wireless connection that does work.
 

A:Solved: Help bridging a wireless and ethernet connection in Win XP

Read other 16 answers
RELEVANCY SCORE 50.8

Running Windows 7 on Asus K50I laptop

I recently tried to manually clean my laptop removing AVG, CCleaner, and a few other programs and files. (Bad idea)
And immediately, I cannot connect to the internet via ethernet (wired) or wireless. The laptop has worked for over a year on ethernet and at times I use wireless. A separate laptop is connected via wireless so I am confident it is not the modem, router, or wireless (which were all restarted).

The Windows Network Diagnostics says:
- There might be a problem with the driver for the Local Area Connection adapter.
- There might be a problem with the driver for the Wireless Network Connection adapter.
Detail says: Windows couldn't automatically bind the IP protocol stack to the network adapter.

Steps taken:
- Disabled and enabled Atheros Ethernet controller and Atheros Wireless Network Adapter;
- Reinstalled Atheros Ethernet Controller and Atheros Wireless Network Adapter drivers;
- Reset the TCP/IP Winsock, IPv4, and IPv6 and restarted;
- Restarted laptop, modem and router many times
I noticed you requested this from a different thread so I am adding it...
Running ipconfig /all I get:

Windows IP Configuration

Host Name . . . . . . . . . . . . : Richard-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Tunnel adapter isatap.eau.wi.charter.com:

Media State . . . . . . . . . . . : Media disconnected
Connecti... Read more

A:Solved: Unable to connect to ethernet or wireless

Read other 16 answers
RELEVANCY SCORE 50.8

Dell Netbook / XP sp3. Bought from a colleague - wireless connection worked both at his home and WIFI at a coffeee shop [saw it]. Have tried it in two homes - one with Roadrunner cable, the other with AT&T DSL. In both cases, the ethernet cable [through different routers] works and wireless works on my Toshiba notebook.

I have done ipconfig release/renew, there are no flags in Device Manager, the wireless icon says there is a good connection, it's set to automatically detect settings. ping shows the ip address. However, the diagnostic for XP reports the following: "Could not get proxy settings via the Automatic Proxy Configuration mechanism. This computer has the following default gateway entry[ies]: 0.0.0.0
There is no default gateway entry"
Please advise what I should try next. Thanks, Cory
 

A:Solved: dell mini wireless down, ethernet ok

Read other 10 answers
RELEVANCY SCORE 50.8

Wasn't sure if this was supposed to go here or in networking, so I just put it here.

My family recently got a new desktop computer and my parents are putting it in my brothers room, which is near the opposite end of the house where the router and modem is. Should I just tell them to get some retartedly long Ethernet cord, or is there a good enough wireless adapter I could buy? I know direct connections are almost always better, but I don't think there is a store that sells long ethernet cords that stretch across my house, which is pretty big.
 

A:Solved: Ethernet Cable or Wireless Adapter?

It's easy enough to get an Ethernet cable up to 100 meters, and I'd guess that's long enough.
There are many factors that affect wireless reception, including the construction of your dwelling and the hardware you use, so I'd ask a mod to move this to the networking forum where you might get better help.
 

Read other 3 answers
RELEVANCY SCORE 50.8

Hi,

Iíve been connecting my laptop (running windows 8.1) to the internet via a wireless router (TP-LINKís TL-WR841N) for quite some time. Now Iím trying to do so via an Ethernet cable connected to the router, but Iíve tried with two different Ethernet cables and neither work. Sometimes the internet connection status will initially say connected, but when I try to access a webpage I get the error ďDNS_PROBE_FINISHED_BAD_CONFIGĒ on chrome, then the connection status changes to limited. I can connect to the internet via Ethernet cable at work.

I used to have a static IP reserved for my laptop, but then removed it to see if that would make the Ethernet connection work (it didnít).

I have also reset the modem, run troubleshooting, reset my laptop numerous times, and run ipconfig release/renew. I also changed the name of the router, then changed it back and re-input the password.

Partway while trying these things my laptop changed from identifying the connection as Wire1 (name of my router), to calling it unidentified network (no internet access). My Lumia 520 windows phone also became unable to connect to the router (it says Wire1 is not responding).

Can anyone help me with solving either of these problems regarding my laptop and phone?

Ipconfig/all run when connecting my laptop to the router via Ethernet cable with wireless disabled:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Users\Myrtle>ipconfig/all

Windows IP ... Read more

A:Solved: Wireless works but ethernet doesn't

Read other 11 answers
RELEVANCY SCORE 50.8

Hello,

My problem is that I can not access the internet and print at the same time. I access the internet thru a modem with a ethernet connection directly to my laptop and I also have a wireless router (TrendNet 54 Mbps, TEW-432BRP) that I use to connect 2 printers.

If I want to use the internet I have to disconnect the wireless router and then if I want to print, I have to re-connect the wireless router which then prevents me from accessing the internet. I can only connect to one of these at a time which is driving me crazy.

I also receive error messages about ip address conflicts on my laptop so I don't know if this has anything to do with my problem. I hope someone can help me with this.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Celeron(R) CPU B815 @ 1.60GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 4039 Mb
Graphics Card: Intel(R) HD Graphics Family, 1795 Mb
Hard Drives: C: Total - 260242 MB, Free - 119605 MB; D: Total - 29690 MB, Free - 27423 MB;
Motherboard: LENOVO, Base Board Product Name
Antivirus: Microsoft Security Essentials, Updated and Enabled

Thanks & God bless,

Patrick
 

A:Solved: Ethernet & Wireless router problems

Read other 13 answers
RELEVANCY SCORE 50.8

When plugged in via ethernet I can get about 35 megabit but when going wireless, I'll be lucky if I hit 14 megabit. I have a linksys e2500 router with the latest firmware. I have tried 2 different wireless cards one usb (TP-link n150) and a PCI-e (asus pce-n15), both with the latest drivers available. With the Asus my connection is a steady 5 bars, at 144.5 Mbps. I am in an apartment complex so there are a lot of other signals around me but I have tried to select the best channel I can with the least amount of overlap I can. Anyone have any ideas about some hidden router settings that might throttle speeds? Any help would be greatly appreciated!

Oh and I'm running windows 7 64bit
 

A:Solved: Wireless half the speed of ethernet

Read other 15 answers
RELEVANCY SCORE 50

I am running windows 7 on my laptop. Every time I plug an ethernet cable in my wireless adapter automatically shuts off. I want to use both wireless and wired at the same time but can not figure this out! There has got to be some setting somewhere that is auto switching the adapters when an ethernet is detected but i cant find it! Please help me! thanks a bunch in advance!
 

A:Solved: When ethernet plugs in wireless adapter shuts off

Read other 10 answers
RELEVANCY SCORE 50

Hello,

I am brand new to this website and just figured I would give it a shot.

I have a PC with both a Wirless PCI card, and an Ethernet PCI Card. I have windows XP Home Edition SP3. I am over at a friends house where she has a Netgear Wireless router, which broadcasts an encrypted wirless signal throughout the house. The code is 10 characters in length, and I can successfull connect to the internet on my PC.

I am trying however to run the windows networking wizard that allows "other computers to connect to the internet through this computer." Then I am taking an ethernet cable, plugging it into my XBox 360, and then into my computer and trying to get onto XBox Live.

Now in the past, this has ALWAYS worked, but the wireless signal I was using to supply the connection to the XBox with was always unsecured and did not need a password. Now that my XBox is on and connected to the PC, my taskbar shows that my wirless connection is just fine (Very Good Signal Strength) and the internet is up and running perfectly. However the Local Area Connection Logo on my taskbar shows "Limited or No Connectivity".

I have a hunch that this has something to do with the fact that the connection I am trying to share is encrypted, and is not letting the Ethernet card share fully because it is not somewhow hooked up to the same key code.

Is there something easy that I am missing? Going into properties on the Ethernet card and simply setting up correctly? Any help would be m... Read more

A:Solved: Sharing an Encrypted Wireless Signal to Ethernet

Read other 8 answers
RELEVANCY SCORE 50

Hi and thanks for any advice you can give, it's really appreciated.

I have an HP Compaq 6715s laptop with Windows 7. I have had a problem for sometime where the modem (the aforementioned Broadcom 590x 10/100 Ethernet) will not work wirelessly any more. I just get an icon in the bottom corner with a red x over a monitor and it doesn't seem to be able to detect any wireless networks. This has happened quite suddenly and I've not changed anything on the cpu that I'm aware of. The modem does still work if I physically plug it into the router.

Windows insists that I have the latest drivers and not being hugely technical, am at a bit of a loss to know what to do.
Thanks in advance
Jamexp1
 

A:Solved: Broadcom 590x 10/100 Ethernet modem won't go wireless

Read other 11 answers
RELEVANCY SCORE 50

I have a combination modem/router supplied by my internet service. My main floor desktop computer is connected directly via Ethernet cable. Two laptops, an ipad and a couple of TV's connect wirelessly. I have a large house with an office in the basement which is pretty much underground and on the other end of the house, so I recently ran a second Ethernet cable from the upstairs modem/router to a desktop computer in my downstairs office. The connection itself worked fine. I did notice, however, that my wireless connections would not work when the second Ethernet cable was plugged into the modem/router. When I unplugged it, wireless started working again. Could the problem be with the Ethernet cable? It is a CAT 5e cable which I made myself since I needed a custom length. It is my first one, so of course I am doubting myself. It works fine except for the problem it creates with my wireless devices. (My level of expertise is a little more than beginner, but I'm not quite sure I would call myself intermediate yet either.)
 

A:Solved: Wireless won't work when second ethernet cable plugged in

Check the settings for the ethernet and wireless devices in that basement desktop.

Some computers will disable one device when the other device is being used.

TerryNet and etaf and a few others are the networking experts here, so one of them will probably jump in to help you.

--------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 50

My family just gave me their old Mac desktop, I wiped it clean and then tried to connect to the internet at my house and it tells me I have invalid password for the wireless. I also tried to connect it directly via ethernet cable that works and it will not connect. I want to connect my Mac directly with ethernet. All the other computers with internet work in my house so I know its not the internet. I will post below my computer specs and internet specs which I got from my other windows PC. Please help, ive tried manually putting in the ISP and DNS and nothing works. I am fairly computer savy but Im not to familiar with networking so please descriptive. THANKS!

Computer:
Mac OS X Version 10.4.7
2.16GHz Intel Core 2 Duo
667MHz SDRAM

Internet Specs:
Microsoft Windows [Version 6.1.7601]
Windows IP Configuration
Host Name . . . . . . . . . . . . :*****
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : D4-85-64-**-**-**
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::****:****:eed7:db5a%11(Preferred)
IPv4 Address. . . . . . . . . . . : ***.168.1.64(P... Read more

A:Solved: Mac desktop will not connect to wireless or ethernet internet

Read other 14 answers
RELEVANCY SCORE 49.6

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3766 Mb
Graphics Card: Intel(R) HD Graphics, 1755 Mb
Hard Drives: C: Total - 597065 MB, Free - 490266 MB;
Motherboard: Acer, Aspire 5742
Antivirus: AVG Anti-Virus Free Edition 2012, Not Updated

Please help me, I don't know what to do.
My internet connection suddenly stopped working and I don't know how to fix it, I've restarted the computer and unplugged the modem, amongst other things, but nothing seems to be working.
The only way I can have internet connection is with the ethernet cable, but it doesn't work without...
 

A:Solved: Can only connect to internet with ethernet cable, does not work wireless

you have marked this - solved - has the problem been resolved now

if not
have you made sure the wireless is switched on - often there's a physical switch or a combination of the FN + one of the F keys to control the wireless

post an ipconfig /all and xirrus screen shot
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

We would like to see the results from an ipconfig /all - post back the results in a reply here.

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box
(A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results into notepad and then automatically open the notepad and display on your screen.

Now all you need to do is copy and paste those results into a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will now be highlig... Read more

Read other 1 answers
RELEVANCY SCORE 49.6

Hi ! I know that this question has been asked a lot on here, but unfortunately none of the solutions helped fix my problem..

Last week I was using my laptop when suddenly it disconnected from the internet. I tried fixing it the next day, and even though there were full bars, it wouldn't connect to the network. I restarted my router multiple times and nothing. So, after a fit of anger and messing with different settings on my computer, I pretty much gave up. For some reason, I was able to connect to the internet 2 or 3 times over the past week for about 10-15 minutes before it would disconnect me for the rest of the day.. So, I'm honestly so stumped. I thought maybe it might have just been my router, but I'm at my dad's house now and I'm not able to connect to his network, either. He tried helping me fix my laptop, and thinks I might need to go ahead an order a new wireless adapter, but neither of us are that well with computers/networking. I'm hooked up via Ethernet cord which seems to be working fine, but my wireless is only able to read and not actually connect. (On occasion it will actually connect to the internet, but when it does I can't actually access the internet)

I've tried uninstalling my wireless adapter, disabling/enabling it, a bunch of weird commands that I don't even know what they do (.. probably shouldn't have messed with those), stopping/restarting services, etc.

Anyways, thank you so much for your time,... Read more

A:Solved: Unable to connect to wireless network, but connects via Ethernet

Read other 8 answers
RELEVANCY SCORE 49.6

Hi
My Ethernet connection to my modem has ceased to function on my PC using windows XP home.
The cable is fine since I have been able to connect to the internet with my netbook using it.
Device manager says my network adapter is working properly.
The LAN does not appear in Network connections and no icon appears in the status bar with or without the cable plugged in.
The cable port light is green when the cable is connected.
I have tried updating the driver and have tried to find other fixes through a forum search but nothing has been able to remedy the situation.
AVG virus scans and Maulwarebites scans are all negative.

I am using a USB wireless device to connect to the internet currently but despite the computer says it has a 120 Mbps connection but basic web pages take over 10 seconds to load with many timing out. Other computers using the same modem don't experience the same lag. I don't know if this is related to my Lan issue but I thought I should mention it.

I'm hoping someone can help me.
 

A:Solved: ethernet stoped working. Wireless connects but slower than it should be

I did an IPCONFIG /ALL with the network cable plugged in and the USB wireless connected. This is the transcript.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Aaron>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : shwinbot
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin

Ethernet adapter Wireless Network Connection 4:

Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : D-Link DWA-131 Wireless N Nano USB A
dapter
Physical Address. . . . . . . . . : 5C-D9-98-53-2C-E1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.2.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 192.168.2.1
Lease Obtained. . . . . . . . . . : Tuesday, 9 August 2011 11:34:01 PM
Lease Expires . . . . . . . . . . : Tuesday, 19 January 2038 1:14:07 PM

C:\Documents and Settings\Aaron>
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi, great site/idea.

I'm having a strange issue regarding internet.
Moved country...Ireland to Australia.
PC had never caused any issues before and was connected to net via a wireless adapter.
Moved to Australia, set up PC, everything seems fine apart from not being able to connect to Internet.

Wireless - when I plug wireless adapter into usb port, toolbar displays Monitor with red x, so i double click and to view network list but my network isn't available....but my neighbors one shows up.....even though according to the status of wireless network connections adaptor is "Not connected"??????but my network is a very strong signal and am actually using it right now on my notebook to send this mail....so adaptor's sees asnother network but not my network which is 1 metre away?????

Ethernet Cable - Plug in cable but nothing happens, no change on toolbar, nothing in Network Connections.
Tried internet with 192.168.0.1 but doesn't work....stumped.

Am I making a simple schoolboy error here?

Checked Device Manager and there is a yellow question mark at Other Devices, opened that and inside yellow question mark and exclamation mark over "other PCI Bridge" and "Video Controller (VGA Compatible)

Any advise, cant update any drivers as I cant get PC online obviously.

Thanks in advance.
 

A:Solved: PC wont connect to internet via Wireless or Ethernet cable

Read other 16 answers
RELEVANCY SCORE 49.6

Hello

I've been having internet issues on my HP Pavilion dv9000. The wired connection to my modem comes up as unidentified. This happens spontaneously, either while it's been working or upon log in. I want to fix this problem permanently, if possible. I've tried many solutions to no avail, but I'm thinking if I want this problem fixed, to run through them all again. Open to anything that's had any success rate regarding this problem. Thanks!
Windows IP Configuration

Host Name . . . . . . . . . . . . : LAPTOP-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net

Ethernet adapter VirtualBox Host-Only Network:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-40-1A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IPv4 Address. . : 169.254.148.110(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection 2:

Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Broadcom 802.11a/b/g WLAN
Physical Address. . . . . . . . . : 00-1A-73-AE-AB-7A
DHCP Enabled. . . . . . . . . . . ... Read more

A:Solved: Vista: Ethernet connection unidentified, wireless works

Read other 16 answers
RELEVANCY SCORE 49.6

Hi

I have been searching for an answer for this one but hit a brick wall with it so I hope you can help.

I have just moved to a new flat and my broadband connection won't be up for another 8 weeks. I have a desktop pc and a sony vaio notebook with a wlan adapter. I have spoken to my neighbour above and he has a wlan connection, he's been kind enough to give me the WEP key to access this until mine is installed.

I have tried this on the laptop, I can access it fine from a couple of the rooms. However my main pc is my desktop and this only has LAN cards I have attempted to share the WLAN connection with my desktop using ICS however the router is configured on 192.168.0.1 and Windows needs this IP to enable shared internet on the notebook. I can't really ask my neighbour to change this just so I can share the connection to my desktop.

I have managed to create a lan connnection between the two machines so I can RDP into the notebook to browse the web.

I need to know if there is a way I can configure the network connetions within xp to allow the connection to be shared and if not, If there is some kind of proxy application that will allow me to share the connection with my desktop, I have had a look at winproxy but it's all a bit over my head.

I know it would be much simpler to buy a WLAN card for my desktop but this is only temporary so I don't really want to spend the money on something I will never use again.

Can anyone help with this.

both ... Read more

A:Solved: Sharing laptop wireless connection with desktop via ethernet.

Read other 8 answers
RELEVANCY SCORE 49.6

Hi,

I just bought a new router the ASUS RT-N56U .

After setting it up getting ISP provided information everything seemed to work fine but i then i done a speedtest with the ethernet cable plugged in and it would start off at 8Mb/s then would instantly drop to less than 0.5 Mb/s Here is a picture of what it looks like http://prntscr.com/7z9jcl I don't know how to fix it because when im on wireless only it works perfectly fine is there anything i can do?
 

A:Solved: Get huge speed drop on ethernet cable not on wireless!!!

There are a lot a variables. How is your cable made? Is it a store bought cable? Did you make it? Is it run or is it just laying on the floor run from router to PC? A little more info might help but ultimately it might come down to without being there to test the actual cable and NiC we won't be able to know for sure.
Sent from my iPhone using Tapatalk
 

Read other 10 answers
RELEVANCY SCORE 49.6

Hello,

I am having problem connecting my laptop to the internet via ethernet cable.

I am typing this from a Mac desktop that is on the same connection - no router in use, just a cable modem.

I have tried 3 different laptops plugging in to the ethernet cable directly to the modem and all say the same thing - limited to no connectivity for the XP machines, and "Local access only" for the Vista machine.

It recognizes the ethernet cable, and it searches for connectivity but does not succeed.

What makes this weird is that the connection itself is live as evidenced by my ability to type on this desktop.

Please help!!
 

A:Solved: Can't connect laptop to internet via ethernet cable (wireless is ok)

Read other 16 answers
RELEVANCY SCORE 49.6

I've got a Dell Vostro 1500 notebook running Windows XP SP3 without any major problems. I access the internet using A modem connected to the router for wireless access.

I've recently procured a 100 metre ethernet cable and decided to make use of it, but discovered that I couldn't connect to the internet while I was connected to the router (similar results with connecting directly to the modem itself). I've connected other Laptops to it, and seems to work perfectly, which indicates it's the computer.

What I've tried till now
Opened Device manager and checked if the network adapter was active. It wasn't for some reason, but i've just enabled it and it says that i'm connected but without any result.

I'm not entirely sure what the problem is!

Hoping someone on here can help!

Daytripper

A:[SOLVED] Cannot connect to Internet using Ethernet (Wireless works flawlessly)

In Device Manager, click "show hidden devices". There are hidden devices & drivers necessary for Internet connection. Check that they are working and not flagged.

Read other 10 answers
RELEVANCY SCORE 49.6

Hi everyone, found this site by searching for an answer to my question which has had me stumped for a week now. Basically, I got the blue screen o' death and had to wipe the partition and re-install XP SP2 from my Recovery Disk provided by ibuypower.com with my HEL-80 laptop.

I installed every driver from my supplied CD in order as I'd lost my backups in a recent move. Everything works fine, except: Wireless Internet and Ethernet Controller (Question Mark, driver cannot be found any way I've tried) and my Intel 82801G (ICH7 Family) USB Universal Host Controllers: 27CA, 27C9 and 27C8 as well.

The USB issue isn't my priority, but the wireless internet is. I even re-installed XP SP2 a second time, re-installing all drivers to see if I missed something. The card listed on my CD is a Intel Golan 3945ABG, I've downloaded the drivers and it still doesn't appear under my 1394 Net Adapter nor my PCI-E Nic Card either.

I've already contacted the company I purchased the company from and am trying to get in contact with Intel to resolve this issue. I copied the Belarc System Advisor sheet to notepad, and will attach it to this post for a full measure of everything I have. Hope you guys can help, this has stumped quite a few people I know that are fairly good with computers!
 

A:Solved: Reinstalled XP, missing wireless internet, USB and Ethernet Controller

Well no one wanted to help because it probably seemed dumb, but I finally got it.

The supplied driver CD was incorrect, I did not have an Intel card, rather I had a Gigabyte brand card and I was finally able to locate the correct driver.
 

Read other 1 answers
RELEVANCY SCORE 49.6

Hi,

I have an Acer Aspire One that can connect to the internet via ethernet cable with no problems. However, when remove the ethernet cable and go wireless, the wireless connection shows Status - "Connected" and Signal = "Excellent", but I cannot browse to the internet.

I've scoured several forums on the internet and tried several different things, all to no avail. I'm not tecky, and can't remember all the things I've tried from looking on the internet, but none have worked so far...

This is my system spec:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, x86 Family 6 Model 28 Stepping 2
Processor Count: 2
RAM: 1011 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 224 Mb
Hard Drives: C: Total - 15373 MB, Free - 9253 MB;
Motherboard: Acer,
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

Is anyone able to help me out? For info, there are 2 other computers in our house that access the network over wireless, and both work fine...

Thanks
 

A:Solved: Can connect via ethernet, wireless connected too but not able to browse inter

Read other 8 answers
RELEVANCY SCORE 49.2

I have searched in this forum for a solution a few different ones came up and all with similar yet different problems. Soooooooo I am posting this thread with my info.

I have an Eee Pc 1000H XP SP3 and when I did an ipconfig/all this is what it returned:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Aracely>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : MiniMe
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 00-22-43-5F-0B-C9

Ethernet adapter LAN 2:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver
Physical Address. . . . . . . . . : 00-22-43-AE-45-0B

C:\Documents and Settings\Aracely>

thanks for your assistance in advance

EDIT - I have actually tried to do a TCP/IP stack repair options for Windows XP with SP3 with no avail =/

A:[SOLVED] Ethernet adapter Wireless Network connection Media Disconnected

Firmware is updated and restarted router and nothing. It is only with the Eee PC Netbook. My other two laptops are working fine.

I have viewed system events and I have a network error: A blocking operation was interrupted by a call to WSACancelBlockingCall.

Read other 4 answers
RELEVANCY SCORE 49.2

hello,
As my PC will be moved upstairs soon where there is no way to get a ethernet cable any more,
I will be forced to go wireless...
I have never wanted it and never used it except on my mothers laptop witch is obviously built-in.
So my experience with wireless stuff is very low...

some fact that may play a role for your comments:
-from PC to modem/router threw the walls will be about 8 yards max.
-there is a chimney in the direct path from PC to modem/router.
-there is barely any metals used in the house although the modem is placed next to the water-main.
-the laptop of my mother never had any issues and is about 2 years old cant tell you the what hardware it used ATM.

Now what I want:
-I want my 6.4 MB/sec speed (other wireless devices dont play any role > mom laptop (80% facebook and 5% mails and 5% searching the web and the rest is youtube lol ; and the smart TV really doesn't do anything except for streaming some video clips very rarely.

- I NEVER want to get disconnected!! not even for a millisecond if you catch my drift.

- I prefer an internal piece of hardware witch I have a PCI slot for with the room. Although I would also like to be able to give internet to multiple PC's or whatever , ya never know ; LAN party for example...
i do realize a switch would suffice but I'll just give you everything because I know there are many ways to go wireless. just dont know crap about them...

- I'm not a millionaire but I dont buy crap so keep that in... Read more

A:Solved: Help! need to switch from ethernet cable to wireless connection to modem/rout

Read other 11 answers
RELEVANCY SCORE 47.2

Are you guys aware of a single pci card that offers the typical ethernet connection as well as a wireless one? I'd like to have the option to connect to either and I don't want to get two seperate cards. Any info is appreciated, Thanks
 

A:10/100 Ethernet/Wireless Ethernet PCI combo

I don't think you can do that but I would go wireless. :bounce:
 

Read other 1 answers