Over 1 million tech questions and answers.

Need help on updating my BIOS

Q: Need help on updating my BIOS

1.Please use the prepared boot disk to boot into DOS mode. Then, type in the following commands?

afudos /i For example, afudos /ip4c800b.rom,


refers to the fullname of the BIOS file. The following shows the procedure of BIOS refreshing.
_________________________

How do I find out the fullname of my BIOS file? I typed in the given one, but it said error: can't open rom file.

RELEVANCY SCORE 200
Preferred Solution: Need help on updating my BIOS

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Need help on updating my BIOS

The file is on your floppy. Just look at the contents with the dir command or browse the thing in Windows or whatever.

Read other 2 answers
RELEVANCY SCORE 53.2

I have downloaded the bois from the lenovo official site. But when I am updating its show the error message not for this notebook . I have lenovo g500s laptop .other people also facing same issue for the same laptop .please help ...Thanks in advance...











Solved!
Go to Solution.

A:Lenovo g500s bios updating problem. While updating...

Pan761,
 
The correct version of BIOS update has been just released - BIOS Update for Windows 8.1 (32-bit, 64-bit)
 
Now there should be no problems with it's  installation.
 
Regards,

Read other 1 answers
RELEVANCY SCORE 49.6

AMD Dual Core processors - updating BIOS?

how do you do this?

thanks a lot
 

A:AMD Dual Core processors - updating BIOS/flashing BIOS?

Flash a BIOS?
You need to download the update from the motherboard manufacturer. Then follow the directions in the readme file that usually comes with it.
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi. I have a dell inspiron laptop. My problem starts when i tried to update my bios from a07 to a15. While the update is running my laptop screen suddenly turned blank but my laptop is still on. What should i do?

A:Bios update fail. Blank screen while updating bios

Please check and see if you can get into BIOS. By the way list Dell model number and version of window. Ex: Dell Inspiron 3543, windows 10
1. Power off computer
2. Power on computer, quickly start tapping F2 key continuously. Hopefully, you'll be able to see BIOS screen.

Read other 1 answers
RELEVANCY SCORE 49.2

Hello.I need to update BIOS on my notebooks.I used my second computer to creat  a BIOS recovery drive on my USB.I used this way:Recovering the notebook BIOS using an external storage devicehttp://support.hp.com/us-en/document/c02693833 I download recommended version:sp62234.exeAfter step "5. In the Location to Save Files window, click Change."The HP System BIOS Update Utility DOSENT opens and i have 2 errors: 1.IHISI: Get support mode fail in SMI!  2. BIOS did not support InsydeFlash!  Please help me.

Read other answers
RELEVANCY SCORE 49.2

hi there, i am fixing a friends old computer and the hdd was stuffed so i got a new maxtor diamondmax 9 for it. although once installing it i found out that it would only run in udma2 mode (checked it in another computer and it ran at full udma6)
so i suspect that the current bios cannot support udma5 or 6, so i am looking for a bios upgrade for it.
the bios string is 6A69RPRDC-00, the number on the actual motherboard is 35-C960-00-05
thanks for any help, i am really hoping i can make this board work at udma5 at least and not have to settle for udma2.
thanks again
-Moltenz

ps. i just found this
AM-960
04/19/2001-i815-ITE87X2-6A69RPRDC-00 ITE87X2 + Winbond-W39A
at http://www.plasma-online.de/english/identify/serial/mainboard/mb_aristo.html
if that is any help.
 

A:help with updating bios. cannot find bios upgrade - 6A69RPRDC-00

WOW..............

Old Machines.....(just like me... but can still perform to the max lol)

I your Bios has the option of udma up to 6 then generally the bios supports the Mode! and your problem is that the HDD does not support the mode (cant remember if you said it does).

You are probably using wrong criteria for bios upgrade search.
Try WWW.driverguide,com

You Need the MB's Manufacturers Name or at least the MB Chipset and bios Manufacturers Name as well. go to the Computers muanufacturers website (you probably done that already) and search model.

otherwise Download a System info utility from Tech Spot, I use SiSoft Sandra or AIDA32.. (sandra might cause bluescreen on older machines).. Aida problably will have link direct to bios update site. hope this was of some help
 

Read other 9 answers
RELEVANCY SCORE 46.8

hiiam new to this so forgive me if i have posted in the wrong placei own an hp 250 g4 recently i updated my bios and after successful update i tried to enter bios and its asking for admin password but i never has set any admin passwordit says system disabled  [ |  87228416] i can normally boot into my os but cant enter the bios plz help me 

A:asking for bios password after updating bios

When prompted for password try 38180438

Read other 2 answers
RELEVANCY SCORE 46.8

i updated my bios and the fan is now very loud on it for some reason , im not sure why here's my belarc advisor list if anyone can help me get the fan back to normal that would be very helpful!

Windows XP Professional Service Pack 2 (build 2600) Packard Bell NEC SPIRIT 550
Enclosure Type: Desktop
Processor a Main Circuit Board b
2.93 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: Packard Bell NEC
Bus Clock: 133 megahertz
BIOS: Phoenix Technologies, LTD 6.00 PG 07/15/2005
Drives Memory Modules c,d
80.02 Gigabytes Usable Hard Drive Capacity
63.95 Gigabytes Hard Drive Free Space

COMBO IDE5232CO [CD-ROM drive]
SCSIVAX DVD/CD-ROM SCSI CdRom Device

Apple iPod USB Device [Hard drive] -- drive 1
ST380011A [Hard drive] (80.02 GB) -- drive 0, rev 8.01, SMART Status: Healthy 480 Megabytes Installed Memory

Slot 'A0' has 512 MB
Slot 'A1' is Empty
Local Drive Volumes

c: (NTFS on drive 0) 80.02 GB 63.95 GB free

Network Drives
None detected
Users (mouse over user name for details) Printers
local user accounts last logon
ashley 12/4/2005 4:57:52 PM (admin)
local system accounts
Administrator never (admin)
Guest never
HelpAssistant never
SUPPORT_388945a0 never
Marks a disabled account; Marks a locked account None detected
Controllers Display
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
SiS PCI IDE Controller None detected
Bus Adapters Multimedia
VAX... Read more

A:BIOS HELP!!!!!! fan very loud after updating bios

Read other 16 answers
RELEVANCY SCORE 44.8

Hi,
its a bit lengthy and might not seem a really general question; but I guess Im only asking for basic understanding here:

Im occasionally getting the error 13 :
: The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.

I thought I would do a bios update. I googled it and found this,
when I go to the manufacturer website (here) , I cant see any batch file that the manual mentions, instead there is exe files to updating the version of bios. when i download and run them, I get the error saying that the file didnt install properly and if i want to redo it with the recommended setting. I tried checking the version of the bios externally with a software and it seemed its still the previous version. I tried reinstalling the update using the new settings, same old same old.
note: in the sony website it says:
This BIOS update must be installed before upgrading to Microsoft? Windows Vista? operating system. ( the computer was shipped in xp)
I have missed it.
anything I can do?

cheers,
Shahab

Read other answers
RELEVANCY SCORE 44.8

Recently discovered my BIOS is from 1999, All i know about it is that is is a Dell AO6 Revised, where can I get an update (preferably for free)?
 

A:BIOS updating-ing

I would check Dell's web site. Only update your BIOS if you have a reason to do so! If everything is working OK leave it alone.
 

Read other 1 answers
RELEVANCY SCORE 44.8

hi, I'm new here, and need help updating my bios, i know my way around a computer a bit, but this has got me stuck, i have no floppy drive, so thats out of the question, i just bought a CD burner, tried that once didn't seem to do anything, may have burnt it wrong i really don't know, could use some step by step instructions
the motherboard is an abit IB9, i have already found the correct update for it, any help would be greatly appreciated
 

A:updating bios, help

Is there a specific problem with your board that a BIOS update corrects? If not, I would leave it alone.

Here is a link from Abit that explains the flashing process in detail.

http://www.abit.com.tw/page/en/download/guide.php

Additionally, it is reported that Abit ceased motherboard manufacture at the end of 2008. If you should encounter a problem with the flash and need to RMA the board you may or may not be able to do so. I would proceed with caution.

http://www.tomshardware.com/news/abit-motherboard-exit-universal,6278.html

http://www.pcworld.com/article/155869/motherboard_manufacturer_abit_dead_sortof.html
 

Read other 2 answers
RELEVANCY SCORE 44.8

I just got a 250Gb Western Digital Hard Drive and it is read by the computer but it won't let me access it. I was told that updating the BIOS might help, but i am not sure how to accomplish this. If you have any other idea on what might help or how to update the BIOS plese let me know. Thanks in advance for any help given
Stephen
 

A:updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

Hi i have just bought a new laptop as i fried the MoBo in my last one which i bought in the early days of Vista, not realising what system requirements were for Vista i landed up with a very under resourced in the hardware dept. laptop and i am shure my constant tinkering with the hardware caused the death of it. Which brings me to my query (now that i am overly paranoid about tinkering with hardware) i have been researching and have found there is very mixed opinion on applying Bios updates and was wondering what people here thoughts are? I have two pending Bios updates 1st addresses better support for SP2 and the 2nd improves system performance & LCD panel brightness.
and if i apply these updates do i need to do both updates or just apply the current one, any opinions would be greatfully received.

A:Updating the BIOS

Bios updates are mutually exclusive (ie, you can only have one installed). I believe that most bios updates are cumulative so if you choose the newest one you should get both of these issues addressed.

Read other 2 answers
RELEVANCY SCORE 44.8

BIOS: Phoenix - AwardBIOS v6.00PG

That is my bios from dxdiag...where can I update it?
 

A:Updating...BIOS

best place is from the Motherboard manufacturers website.

wrs
 

Read other 3 answers
RELEVANCY SCORE 44.8

Not sure if this is the right subforum.  System specs: Model: HP Pavilion p6522f desktop PCProcessor: AMD Athlon II X4 635 2.9 GhzMemory: 8 GB RAM installed  (2 sticks x4)GPU: Nvidia GeForce GTX 560 graphics card Motherboard: CPU-Z tells me it's a "FOXCONN" model "2A92 1.01" and the BIOS is American Megatrends Inc. v 6.09 09/07/2010. My BIOS seems very out of date (3 years old) and I would like to update it. I use this computer for gaming, and Borderlands 2 is unreasonably laggy even on mid/low settings, and I've read in multiple places that making sure the BIOS is updated is an effective fix. How do I go about doing this? What's the right .exe to download and run?  













Solved!

View Solution.

A:Updating my BIOS?

Hi, You can find new BIOS up to 8th May 2013 on the following link:    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4254837#N682 Regards.

Read other 6 answers
RELEVANCY SCORE 44.8

I am not sure and want to know if I need to update my BIOS.

This laptop is 2 years old, and is running all well. I haven't had any crashes etc. But I am wondering if updating the BIOS will prolong my machine's life.

Here are some screenshots which give basic info. about the laptop in question.







PS I didn't like the idea of paying more than 20 quid for their yearly subscription.

A:BIOS updating

Unless the BIOS update corrects a problem that you're having, then I wopuld leave well alone. These updates are usually to enable the motherboard to support newer hardware such as processors. Since yours is a laptop, you wouldn't be able to upgrade anyway, so I would leave it as it is.

Read other 5 answers
RELEVANCY SCORE 44.8

I need to update my BIOS. It is American Megatrends Inc. 1009.003, 9/5/2005. I went to the American Megatrends website, but couldn't find what I needed. How should I go about this?
 

A:Updating BIOS

Read other 13 answers
RELEVANCY SCORE 44.8

Does anyone know how I can install a BIOS update on a Pavilion 6835 running XP? The only instructions I can find require me to be in true DOS mode and that's not possible (as far as I know) in XP.
 

A:Updating HP BIOS in XP

Read other 7 answers
RELEVANCY SCORE 44.8

hi there

i want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance

i have bios ver 1.20

can i use the last bios update 1.70 ? or i have to download all the previous updates first

what i mean is the update cumulative ??

thanks

A:about updating my bios

You only have to update the BIOS if you have a problem with the machine. I wouldn't advise you to update the bios becaause you only update the bios if you have a instability problem that warrants a BIOS flash or installed newer hardware that supports the mother board but its unable to boot with the newer hardwareFor exampleI bought a newer CPU (AMD 6100FX) with a newer motherboard socket AMD 3+ but when i installed it it didn't boot up because the CPU was newer than the manufacturer motherboard bios so that warrants a BIOS update. I look up your board and you have some newer versions of the bios but the current bios only improve windows 8 compatibility. The bios is a cumulative update you have to read the documentation for the exact BIOS version because you cant really tell what changes in these updatesBIOS updating can be risky because if you have experience a power issue or event your computer can become a paper weight

Read other 11 answers
RELEVANCY SCORE 44.8

So the motherboard should be compatible with some of the ryzens.But will the bios support it ??

A:Updating the bios ??

@letsthrowq, welcome back to the forum. There are letters associated with the model, such as, nc, nf, nt or no.  Once I have this information, I will able to answer your question better.

Read other 1 answers
RELEVANCY SCORE 44.8

 I did a F10, check my BIOS version is HP Kolvo02.25, 07May 12.I download a 2013 bios in HP support centralhttp://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_113732_1&sp4ts.oid=5232881run it and restart PC, F10 again. When i Flash System Rom, a red label appear 'Removable media is bad or missing'I switch off the PC, press the CMOS button few times. And the results is still similar. I did the instruction as the video instructed, but BIOS did not upgrade either.http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.sn=SGH250SGL4&sp4ts.oid=5232881&docId=emr_na...

Read other answers
RELEVANCY SCORE 44.8

if anyone could help me on updating my bios it would be most appriciated. here's any vital information needed and if i left something out, please let me know and i apologize..

manufacturer: American Megatrends
bios rom size: 256k
bios id: 62-1030-009999-00101111-040201-VIA_K7
chipset: VIA 82C3189 rev 0
 

A:Need Help Updating BIOS

http://www.techspot.com/vb/showthread.php?p=120976&posted=1#post120976
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hello, I'm trying to update my bios version so I can run a virtual machine on my laptop. My current bios version is Insyde F.13 I know that sometimes this can create issues, but however I cannot update it for some reason.. Thank you.

Read other answers
RELEVANCY SCORE 44.8

i have a nvidia geforce 9600 gt grahic card 1gb ddr3

i just wanna update its bios.
just to fix bugs.

plz tell me from where to download bios update?
 

A:updating bios

Read other 16 answers
RELEVANCY SCORE 44.8

I have:
American Megatrends
BIOS date: 04/25/01
BIOS ID: 62-0425-001437-00101111-071595-SiS730S-M810LR
Chip Set: SiS 730 rev 2
OS: Microsoft Windows XP Version: 5.1.2600
CPU: AMD 1.2 GH

What do I need to update my BIOS

Thanks in Adv...
 

A:Updating BIOS

Read other 15 answers
RELEVANCY SCORE 44.8

I asked this question on another website forum and the only answers I got was to buy a newer computer. This is just a spare I am wanting to get running. I have an old Compaq iPaq tower with a Pent III 733MHz processor. It has no floppy or CD rom drive and only supports the slim hot swapable cd rom drives. It has Windows 2000 on it and I am wanting to install Windows XP or a Linux OS via USB. It has Bios ROM (686J5) V 2.08. which doesn't support booting from USB. I am wanting to upgrade to V 2.10 which does support a USB boot but I am having alot of trouble understanding if it's possible to flash the Bios without first installing the files on a floppy and running?? Here is a link to the 3 V 2.10 flash utilitys but I don't know which to choose and the instructions for each 1 are very confusing for me.
http://h20000.www2.hp.com/bizsuppor...eriesId=96490&swLang=8&taskId=135&swEnvOID=19
There is no clear setup to run and I've tryed the DOS instructions and that doesn't work? Any help would be greatly appreciated.
 

A:Help updating Bios

http://h20000.www2.hp.com/bizsuppor...g=8&mode=2&taskId=135&swItem=PSG_I10480-31135

need the flash utility first
but yes confusing !!
 

Read other 2 answers
RELEVANCY SCORE 44.8

how can i update my BIOS? sisoft sandra claims that my BIOS is old and needs to get update...

General Information
Manufacturer : AT/AT COMPATIBLE
Version : Award Modular BIOS v4.51PG
Date : 06/16/98
Plug & Play Version : 1.00

Performance Tips
Tip 201 : System BIOS is old. Check for an update.
Tip 200 : SMBIOS/DMI Interface not supported. Check for a BIOS update.

I just can't find an update from the internet...plz help!!!
 

A:updating BIOS

Most manufacturers have updated BIOS on their websites for download. If it is a custom build, the motherboard manufacturer will have one.

It is not usually necessary to update BIOS unless you have a particular issue that the update resolves . .

wrs
 

Read other 3 answers
RELEVANCY SCORE 44.8

My motherboard is http://www.prlog.org/10116200-new-a...-motherboard-uk-online-computer-reseller.html

And i cant find the right bios to update it.

any1 know which bios is for my motherboard to update it?
 

A:Updating BIOS

http://www.asrock.com/mb/download.asp?Model=P4i65G
 

Read other 3 answers
RELEVANCY SCORE 44.8

Question,
I am upgrading my system from Windows 98 to XP Pro, Full (clean) install. I plan on wiping everything out on the hard drive and start from scratch. Is it necessary to update the BIOS, and if so, where do I find the update? The computer I am upgrading was put together by a local person and he is no longer around, so there is no manufacturer's website to go to and I am not for sure who made the motherboard.
 

A:Updating BIOS

It is a good idea to run the Compatibility wizard on the XP Disc prior to installing . . it will tell you what hardware and software is compatible. ( Insert the XP disc while the system is on and choose "Check for Compatibility" )

I like to update to the newest BIOS when I Upgrade a pc to XP, but it is not a exercize to be undertaken lightly . . I use a UPS to prevent a power loss from converting the machine into a trotline weight . .

You can download and run the Belarc Advisor or Everest to find out what MotherBoard you have ( and a lot of other details about the system as well )

Good luck . .
 

Read other 3 answers
RELEVANCY SCORE 44.8

Hello

Probably a very naive question but I'm wondering how I can update my BIOS (if an update appears) when my PC doesn't have a floppy (A drive? Most of the accounts I've read on the website for the motherboard (ASUSTek) are confusing and involve copying a file onto a floppy for reboot.

Is there another (simpler) way?

Thanks
 

A:Updating Bios

Most new machines have updaters that run in Windows. If the file needs to installed from DOS, like a floppy, it can be installed from a bootable CD that boots into DOS, like the Win98 Boot CD Image that has had the BIOS files injected into its image.
 

Read other 2 answers
RELEVANCY SCORE 44.8

While updating BIOS..when my laptops restarts it stops with a blank screen and caps lock starts blinking two times

Read other answers
RELEVANCY SCORE 44.8

Hello, My laptop is Pavilion 15-e017tx Notebook and i need to update the bios. After downloading the .exe file in the installation wizard it showed "options for creatin partition as recomended  " & "proceed without creatin the partition".What should i do. I dont have the recovery parition drive in my laptop as i formatted it by mistake. What shold i do. Or can i proceed without any partition create and i want to know actually what is created in the partition. Thanks

A:Updating Bios

 Your laptop with Windows 10 installed has no updates for anything including the BIOS. Only updates for Windows 8x and 7. The latest BIOS version is F.24A I have updated BIOS a number of times but have never come across the installer asking about creating partitions.

Read other 5 answers
RELEVANCY SCORE 44.8

Hi, I just bought a new graphics card, Geforce GTX 960.On the support page of EVGA, manufacturer of my card, they stated that I either have to update my BIOS or buy a new motherboard...I checked the website and there seems to be no update for bios available.My current version is AMI 7.13, 5-1-2012. Does that mean that there is no other option than to buy a new motherboard?

A:Updating BIOS

You can try a compatible graphics cardhttp://h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Official-list-of-supported-graph... Or check with the manufacturer of the card

Read other 2 answers
RELEVANCY SCORE 44.8

Hello!

My OS is Win7 ultimate 32-bit.
I have an Asus P5LD2-X/1333 motherboard. I used to have a Intel Pentium Dual-Core 1.80ghz. Today I installed a Intel Pentium Dual-Core 2.50ghz E5200. It's running just fine, without any software updates. However when starting the PC I get the following message:

Unknown CPU detected. Update BIOS to unleash it's full power.
Fress F1 to continue.

As I said, Windows runs just fine. But I feel like I should update the BIOS (or should I really?).

After 2 hours of failed attempts to update it, I find myself here. The update file i got from the Asus site is a .rom, so I can't run it with Windows.

So what have I done?
First I created a bootable flash drive with the .rom file on it using windows's tools (cmd > diskpart) as fat32. When trying to boot it (after I changed the boot order) I get a message saying "Remove any storage or media". When I use the BIOS's EZ Flash I get the following loop:

Checking floppy...
nothing found!
Checking CD...
nothing found!
etc etc

I tried the same, this time with ntfs - same results.

Then I did the same, this time making the flash drive bootable with Rufus. The results are mostly the same, but this time when I boot it, I get a flashing "_" at the bottom left of the screen. It stayed there for 6 minutes and I eventually lost patience. Should I have waited more?

Final note: I had been using a 2gb and a 4gb flash drive. Just now I've read that I have to use a f... Read more

A:Help updating BIOS

Bear in mind that if you screw up a BIOS update, it's very easy to turn your pc into a doorstop.

Read other 2 answers
RELEVANCY SCORE 44.8

I have a dell dimension 4550 and i was wondering if i have the best BIOS.. i think it was A05 or something like that.. pllz give link if you there is a better one..
 

A:updating BIOS

Read other 6 answers
RELEVANCY SCORE 44.8

I am having problems using a 200gb drive with an older (2002) gateway. I installed the HD and ran fine for a few months, then I got the the disk read error. I used old drive to load windows and reformatted the 200gb drive, and the it worked fine for another couple months.
I have changed IDE cables and tried everything else but updating bios. So I am currently trying to update the bios with no luck.

My bios readout is as follows
bios rev PT84510A.15A.0005.PO3.0203061931 DATE 03/06/02

I went to gateway website and entered my serial number for the update and found the update for 12/2002, not that current. But i tried it and follwed the directions exactly. the floppy would not work, i got the nonsystem disk error.

Any suggestions for properly updating my bios?
 

A:updating bios

Read other 14 answers
RELEVANCY SCORE 44.8

I want to update my BIOS with a .bin file. I have extracted and saved to a bootable disc. But when prompted in MS-DOS i have no idea what to type in to JUST open the .bin file that needs to run so i can update the BIOS. Thanks a lot... Dave
 

A:Updating BIOS

Read other 14 answers
RELEVANCY SCORE 44.8

I recently put in a new motherboard, a new cpu, and new ram. the computer POST is fine but when it gets to the load windows screen, it just reboots. there is no error, just flashes to a blue screen, then restarts the computer and when it restarts it comes to the screen asking me to choose between restarting in last known good configuration, or in 3 different safe mode options. all of them just repete the process. i tried reinstalling the windows from the boot cd and it reinstalled it fine with no errors, but when it restarts the computer it still wont get passed the load screen. Someone sugested that maybe i have to update my BIOS becase of the new motherboard and new cpu. can someone please explain why that might be, what the symtems are of needing a BIOS update, and why it would help me? im just looking for some clarification before i run such a risky procedure. thank you, kevin
 

A:Updating BIOS

Did you reinstall windows after fitting that lot? If not, thats your problem.
 

Read other 41 answers
RELEVANCY SCORE 44.8

Hi, i've been told a bios update might stop my pc crashing when my belkin wireless is plugged in. only thing is i'm confused as to how to do this!
System analysis says i have american megatrend BIOS, a asus motherboard SE Deluxe, but my boot up screen says Fast track Promise technology.
where do i get the right bios update? which oen will eb the right BIOS? and is it likely to stop the random crashing?!
questions, questions, questions!
Please help/advise!!
thanks,
Mikelo
 

A:BIOS updating

Read other 7 answers
RELEVANCY SCORE 44.8

How do i update my bio i can't seem to find anything to help me

A:Updating the Bios

@Dctchdt,If the original OS was WIN 7, the BIOS is tied to that.  The is "NO" WIN 10 BIOS.

Read other 1 answers
RELEVANCY SCORE 44.8

My board is Asus M2A-VM HDMI. Latest version bios is avilable ie. HDMI1401. Kindly help me to update. I dont have a floppy drive. I want to do through CD. What r the steps to update
 

A:Updating Bios

Hello kunjikaly and welcome to Techspot.



While BIOS flashing can be done with CD ROMs on some newer motherboards, this is not recommended. This is because BIOS updating works at the core level of computing functions.Click to expand...

Taken from here by Tedster.

Regards Jase
 

Read other 6 answers
RELEVANCY SCORE 44.8

Hey all,

I have the MSI K7N2 Delta mobo, which is supposed to have a 400FSB, but when I set it up in the BIOS, it will only go to 200. I saw an update on MSI for that board, which I think may fix that problem, so I downloaded it to my desktop. How do I go about applying the update? I didn't want to just double click the file and see what it does, instead, I decided I should ask the experts here at TSG first.

Thanks,

PaveFE
 

A:Updating my BIOS....how do I

Read other 12 answers
RELEVANCY SCORE 44.8

While I"'m installing software downladed from your website, it shows IHISI: Get suppport mode fail in SMI. and then BIOS didn't support insyde Flash

A:BIOS is not updating

We need the exact model number of the laptop and identification of the BIOS update you are trying to install. 

Read other 1 answers
RELEVANCY SCORE 44.8

I have a Pavillion A6200NI am using Windows 7I would like to update my Bios (Phoenix Technologies LTD 5.20 10/3/2007) but not sure how.I checked HP and one is not offered.Any ideas on how I go about finding and updating my Bios?MotherboardMCP61PM-HM (Nettle2)Manufacturer: ECS

A:Updating Bios

Hello fredb38, I managed to locate a BIOS update for the motherboard you listed. You might take a look at the information in the link below and see if it is what you require. MCP61PM-HM Motherboard BIOS Update    BIOS Link Here   is a link for the drivers and software for your system. Hope this helps.

Read other 9 answers
RELEVANCY SCORE 44.8

I am thinking of upgrading my pc by putting an Intel E8200 cpu with an ASUS P5E x38.

Im just wondering if this is as straightforward as I think because I read somewhere that most of the x38 motherboards are not updated for the latest E8+ cpu`s.

If this is so, does anyone know how to resolve this problem?
 

A:Updating bios

Read other 6 answers
RELEVANCY SCORE 44.8

I need to upgrade my BIOS in an attempt to hopefully fix my new video card. I have a Phoenix ROM BIOS PLUS Version 1.10 A05. Anyone know where to get the updates and how to do them? My computer is Dell Dimension 2400. Thanks.

Oh and I don't have a floppy drive. So I'm not sure how to update the BIOS without one.
 

A:Updating BIOS?

Read other 9 answers