Over 1 million tech questions and answers.

Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Q: Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.

The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.

I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

Preferred Solution: Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
You do need to resolve those Other devices category issues.

Read other 1 answers


So after upgrading my wi-fi card in my XPS 13 9350 to a Killer ac1535 card, the driver for the bluetooth is not working after re-boot Code 19 Error is displayed in device manager, i have tried uninstalling and roll back same Error Code 19 please help

Read other answers

Hello, I recently received a bluetooth headset for my computer but I can't seem to use it. I've added the bluetooth headset to my computer and it shows up on my bluetooth devices list but it doesn't work. Troubleshooting the problem leads to Windows saying that it requires a driver however when I update the driver through device manager, it says that if doesn't need a driver.

I've connected this driver to my smart phone and it works fine but I can't connect it to my computer.

The headset is a Shinco AM7 bluetooth headset. I can't go to their website because its in Chinese and I can't read Chinese.

3x Bluetooth Peripheral Devices show up with unknown drivers in my device manager.

A:Bluetooth Headset Driver problem, Code 28

Would be very helpful if you completed your System Specs. Did the headset come with with a dongle as many desktops don't have the Bluetooth hardware only the software which can then recognize the hardware when inserted and often will need the correct drivers to function properly

Read other 4 answers

d version of windows 10"?
socan u please help me....
My code is:
package First;

import org.openqa.selenium.WebDriver;
import org.openqa.selenium.edge.EdgeDriver;
import org.openqa.selenium.edge.EdgeOptions;

public class Demo {

// TODO Auto-generated method stub
public static void main(String[] args) throws InterruptedException {
// TODO Auto-generated method stub
System.setProperty("webdriver.edge.driver", "C:\\Users\\Ganesh\\Downloads\\MicrosoftWebDriver.exe");
        WebDriver driver = new EdgeDriver();
        driver.manage ().window().maximize();



Read other answers


On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).

The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.

Poking around in device manager, I see this error:

"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."

The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.

I can't even look at the "resources" tab for help because it appears to have vanished in Windows 10!

Is anyone else experiencing this?

A:Bluetooth speaker driver install fails, device manager error code 10

Did you find a solution? I'm having same problem.

Read other 3 answers

Good day ~~
I am working on a ASUS laptop (2 yrs. old), Windows 8.1
I a Bose wireless Soundlink speaker. I paired it to my cell phone and my other laptop, so I know it works. I paired it to my other laptop and shows it is paired. But, it does not connect.

I get:
Bluetooth Audio Device Properties under General a yellow triangle with an exclamation point. It states ~ The device cannot start (Code 10) Object Path Component was not a directory object.

I checked to see if the driver was up to date. It stated it is up to date.

Is there anything easy that I can do myself without paying a lot for the Geek Squad to fix this problem?

By any chance if I upgraded to Windows 10 would it fix this? I would prefer to stay with Windows 8.1.

Any help would be appreciated. Thanks!

Read other answers

I need some help with a Windows 7 (x64) system where bluetooth and usb devices have suddenly stopped working. When I go into device manager I see that my Intel USB 3.0 extensible host controller and my Intel Wireless Bluetooth show exclamations
on them. They both report that "Windows cannot verify the digital signature for the drivers required for this device".  

This machine has been working fine for a while but suddenly stopped working correctly earlier this week.  So far I have uninstalled recently installed MS patches. I installed the most current version of the drivers from Intel for these devices.
I've also ran sigcheck against both drivers and confirmed that they are signed. 

As a work around, I use F8 and boot with driver signing verification turned off but that is certainly not ideal as I have to remember to do so every time the computer is restarted. Anyone have suggestions for a permanent fix?

Read other answers


I am wondering if anyone can help me, I have this error on my cd/dvd driver & I am not sure how to sort it: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)

I am quite new to this, I have uninstalled the driver & searched for new drivers but it just tells me that it hasn't installed it properly.

If I put a CD in it starts to read it then stops & nothing happens. I have searched the net & tried to find a solution myself but nothing as yet.

I'd appreciate it if anyone could help me, but the simpler the better please.

Thanks a lot


A:TSSTCorp CDDVDW TS-L632H ATA Driver problem error code 19

Hi Keswick,

Welcome to the forum

There are a lot of problems with this drive

Is your laptop still under warranty? If so take it back to the dealer


Read other 4 answers

I am running Vista 64 bit with SP1. I do not know if my problem relates to the operating system or SP1 specifically but it may do.
I have recently tried to install two things on my system. The first was a digital TV tuner (USB dongle type). My system would not recognise the hardware, then it had a problem finding the drivers and when I guided it to the installation disk it eventually came up with the error code:
0x800F0247 A problem was encountered while attempting to add the driver to the store
I thought the dongle must be faulty so I returned it to the manufacturer.
I subsequently tried to install drivers for my Nokia phone and went through the same problems. However I had previously installed the drivers for this on another computer so I know it works but on my computer,  after much searching by windows and having to again direct it manually to the installation CD, I again get the message:
0x800F0247 A problem was encountered while attempting to add the driver to the store.
Does anyone have a detailed step by step guide on how to get my computer to add drivers to the driver store when installing new hardware? I ask for a step by step guide because I am a novice at this and the problem just will not go away. I really need to solve this issue.
Many thanks.

Read other answers

Hi, My sisters laptop is not working correctly. It is fairly new, she got it about a month ago. It is an Acer laptop, model #: aspire 5570z, with Windows Vista Home Basic. processor: INtel T2060 @ 1.6GHz, ram: 502MB, and is 32-bit OS.
The problem is that the dvd disk drive is not showing up in my computer, this problem happened yesterday randomly. After seeing this i went to device manager and it showed up so i went to the properties of it, and it says:

windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.

So I tried this, and nothing happens, it just comes up with a box that says sending solution with a little loading bar, it loads, then it goes away.

A:acer laptop has problem loading dvdrom, (driver error: code 39)

Uninstall the driver, and then click Scan for hardware changes to reinstall or upgrade the driver.

Read other 6 answers

Hello all,
I have a problem with my bluetooth. When I start my laptop, the bluetooth doesn't work correctly as in the picture. The device status tells me error code 43. However, it's only happening about 80% of the time I start my computer, but it's still annoying enough.
To make it work, I have to uninstall and re-install it, but the problem is still there. It will come back the next time I start my computer. I also tried different drivers, but it's not fixed.
My laptop is Clevo W230ST, and I'm using Windows 10 Pro.

Thank you for your help.

Read other answers

I have installed a Microsoft bluetooth USB device in my desktop. I have had it for years but had not been able to get it working and lost interest. I now want to use it. My computer recognizes it, asks for the password, all OK but will not accept pictures from my bluetooth phone. I get the error code 67. I do not know where the old software disk is as it has been so long ago since I bought it. I have the latest drivers from Microsoft via download. Any ideas how to make this work?

Regards, Syl

Read other answers

i have recently upgraded to 8 from 7. my bluetooth has stopped working a couple of days ago. the device manager lists bluetooth with an yellow exclamation mark ( code 19...windows can not start device...registry problem...blah blah blah ).

i have uninstalled and reinstalled latest bluetooth driver ( broadcom bluetooth 3 + hsb ) and also tried to repair the registry with freeware - but no success at all.

i can not tell with 100% confidence that win8 upgrade is responsible for that as i did not check whether bluetooth was working after the upgrade. i believe it is not the case as i vaguely remember the system automatically downloaded the latest bluetooth driver from broadcom after the upgrade.

a quick googling of code 19 tells that it is essentially a registry error. but how to repair it?

i do not know the class id of my built-in bluetooth hardware. to delete upper and lower filters from the registry i need to know the class id / guid of my bluetooth hardware first - right?

any other suggestions? thanks in advance.

point to be noted : the code 19 error is present in both the cases - 1 ) with generic bluetooth driver ( after uninstalling broadcom driver ) and 2 ) after installing broadcom driver.

mine is samsung netbook n148plus.

[ compatibility mode can not be used as the broadcom driver is not an exe file. i can not reinstall the broadcom driver directly. i have to use windows update. it downloads again the driver and reinstalls without any result. ]

A:bluetooth error ( code 19 )

This is a common problem with Samsung notebooks and laptops. I have a Samsung RV511 and contacted Samsung directly about driver issues for windows 8 with my model. I was flat out told "don't expect any drivers to be updated" for windows 8 for that model and it seems a lot of older models as well.

Why can't you download and install the driver directly from broadcom?

Bluetooth Software Download | Broadcom

Read other 3 answers

Hello Everyone!
I just registered here to get my problem solved.
I installed windows maybe 6 to 7 months ago in my HP Probook 4530s.From that time there is that problem and I have tried every solution given on the different website but it is not solved.I am having so much need of bluetooth please some one help me!
This is a shot regarding that:

A:Bluetooth Problem code 43

Hi Welcome to Seven Forums ... Try the solution in the Link below ...
A Bluetooth device stops working, and you receive error code 43 together with event 17 after you resume a computer that is running Windows 7 from sleep

Read other 3 answers

i get error 43 when i try to run a blue tooth devise!!

Read other answers

I bought this super cheap generic bluetooth dongle. The reviews gave me the feeling it wouldn't work, but i thought how hard could it possibly be? The reviews were right, it doesn't want to work right out of the box, I get an error code 43, and I'm really not sure what to do. I've tried uninstalling/reinstalling the device and I get the same error. I think it's missing a specific driver but I'm not sure. It's an Excelvan (http://i.imgur.com/KXqxRerl.jpg), a brand you've probably never heard of (until now )

I have it plugged into a USB hub, it flashes red so i know its working... (cant see it here because of the flash)
Device Manager...
right click, Properties...
Driver tab...
clicked Update driver...

My computers' specs are listed below, but it's basically an HP 64-bit laptop.

Read other answers

Hi,My H50-55 has been working fine over the last 6 months and even survived the upgrade to Windows 10 - or so I thought. Logged on todayand both of the Realtek wireless devices have been disabled with the ollowing comments:"Windows has stopped this device because it has reported problems. (Code 43)" This is affecting:Realtek 8821AE Wireless Lan 802.11ac PCI-E NICRealtek Bluetooth 4.0 Adapter I have already tried the rollback to Win 8.1 but it didn't help.  I also re-installed and ran teh Lenovo diagnostics facility and that found nothing wrong at all ! I've seen a few comments about WiFi and Bluetooth cards - anybody had & solved this one ? ThanksLarry

Read other answers

My Bluetooth Dell keyboard just stopped working. My device driver says I have an"Windows has stopped this device because it has reported problems. (Code 43)" in the Blue tooth wireless hub.

I searched and could not find any posts specific to my keyboard problem. I have changed batteries, restored to an earlier day, did the troubleshooter, deleted and reinstalled the drivers. Nothing works. I would appreciate any help! Thanks in advance.

Here are my specs: Microsoft Windows 7 Home Premium , 32 bit
Processor: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz, x64 Family 6 Model 15 Stepping 6
Processor Count: 2
RAM: 3069 Mb
Graphics Card: NVIDIA GeForce 8600 GTS, 256 Mb
Hard Drives: C: Total - 943578 MB, Free - 560122 MB; D: Total - 10239 MB, Free - 4873 MB; M: Total - 476269 MB, Free - 225855 MB;

Read other answers

Hi Guys,
I recently performed a clean install of the Windows 7 Home Premium 64-bit OS on a Dell Inspiron N4110 and everything was fine until I checked Device Manager to find that there is a problem with the Bluetooth device. I've attached a screenshot of the Properties window here:

I have searched online for suggested solutions and majority of them suggest that I uninstall, reinstall the driver and then restart. I have done that several times but nothing worked so far. This is my last avenue of help.
Does anyone have any idea what is wrong with my Bluetooth device driver? What are the possible causes of error code 43 for a Bluetooth device?


A:Dell Wireless 1702 Bluetooth v3.0+HS Error Code 43

Hello again Everybody,
I managed to sort out the Bluetooth problem I had. So, it's all fine now. Apologies for any inconvenience caused.

Read other 1 answers

These are the bluetooth headphones - Creative 51EF0450AA001 WP-300 Wireless Headphones: Amazon.co.uk: Electronics

I bought a cheap USB bluetooth dongle to enable my PC to connect to my bluetooth devices and these headphones don't work. My PC pairs fine with my phone so I don't think anything is wrong with the USB. It discovers the headphones when I try to add a bluetooth devices and recognises them as headphones but when I go to add the device I get this error:
"Adding the device failed resulting in an unknown error. The reported error code is:0x80004005."
I've had a look and I've read a few things about W7 not supporting A2DP but I don't really understand what to do about it.
Any help would be great, thanks!

A:Can't connect Bluetooth Headphones to Windows 7. Error code-0x80004005

maybe this link can help you.

how do you fix error code 0x80004005?


Read other 4 answers

I dont know what is happening to this laptop. This is a fresh problem i have seen this morning. Bluetooth is not working and showing the code error 43. and driver is up to date. what should i do now.

A:DELL wireless 1702 Bluetooth v 3.0 showing code error 43

Hi Vinodrathode,
Welcome to the Community. I suggest you first uninstall the bluetooth driver and reinstall it. To uninstall click on start, right click on computer, click on properties, click on device manager, click on the symbol next to network adapters, right click on Dell Wireless 1702 and click on uninstall, click ok to confirm. Once its removed do not restart your computer, but log on to support.dell.com, click on home users, drivers and downloads, enter your service tag, and download the bluetooth driver under Network, install the driver and restart your computer.
Hope this helps.
Thank you

Read other 3 answers

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

Read other 3 answers


I updated my bluetooth drivers through toshibas drivers update page.

After driver update bluetooth radio and generic bluetooth adabter is stopped because it is giving error code 43.

I have removed to driver and tried to re-install it as the computer finds is during the re-booting but this error is coming again each time without the cure.

Any good advices ?

My computer is running on windows 7-64 bit.

Laptop details are PSK6ME

Thanks in advance.

Read other answers

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

Read other answers

 Product Name: HP ENVY 15-j059nr Quad Edition Notebook PCOperating System: Microsoft Windows 10 (64-bit)Excused me!I have forgotten my ENVY 15's BIOS administrator password.This is the code it shows after 3 times of typing the wrong password:18874377 Could you give me the reset code for this, please?Thanks in advanced.

Read other answers

Hello everyone now im struggling so bad with this error code on my GPU i have tried several trials and none of them worked such as *uninstall and reinstall *use DDU*Older versions on my driver*latest update on windows and bios*took off battery and discharge the electricity while disabling the driver  none worked and when i conducted hardware test i got this result code : WVC000000-UO7C3G  i need so bad to know how to fix this because unfortunately my warranty expired 1 week ago and i got this issue few days ago ;c  my laptop is a gaming laptop without my GTX it is useless   

Read other answers

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code


Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


* *
* Bugcheck Analysis *
* *
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
2: kd> !analyze -v
* *
* Bugcheck Analysis *
* *
Driver Issues:


Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version

C... Read more

Read other 9 answers

After poking around on other threads, there's a chance this is related to the hardware drivers. However, I wasn't able to find a thread with this exact error code, so any help on what this means and how to correct it would be appreciated thanks! This is generating on a LENOVO ideapad Y700 series laptop (15 inch).


Go to Solution.


Update your Intel Video driver and the false error from LSC should disappear.WVC007002-UM7YSIw=windowsvc=video cardtest 007result code 002um7ysi is a hash code of the serial number of your machine and useless info<unless you chose to send feeback info to Lenovo

Read other 1 answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.

Read other 9 answers

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

Read other answers

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

Read other 6 answers

Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt

Regards, Boopathi

Read other answers

Just got this result. What does this mean??Thanks!

Read other answers

Basicaly the title explain it all,can find the driver for on board audio device.
I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106
Newly instaled Windovs 7 Ultima 64bits.
Trayed few diferent drivers non of them works,so probably is audio device gone.
Any sugestions?

Read other answers

So, for preparation for the new warhammer: age of reckoning I purchased a new video card to bring my specs up to run the game nice.

I got a Geforce 8600GT 512mb 128-bit DDR3 card. Im gonna run down what I did.

1. switched the cards
2. logged on, there was a automatic software update, and Installed the drivers as well off the CD (like a nub) and also a service package for vista came up for the drivers for the new card.
3. I was unable to log into any game due to a insufficient card, so I went and checked the card in Device Manager. Sure enough a Code 19 error: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged.

things i've tried: Uninstalling the drivers and reinstalling drivers from the producer of the card (ASUS) and the card developer (nVidia) in both safe mode and regular mode. Ive system restored to the last time the registry was configured correctly, ran a registry defrag and scan, system repair with the hardrive, and I've also swapped my old card back in and it has the same error.

So me and my friends came to the conclusion that it was a deep seeded problem with the drivers when I installed drivers for XP (we think thats what the CD was for) while I am running Vista. The problem is I dont know how to fix it...please help!

Also in addition to these problems what has started happening in conjunction with this is my taskbar and icons are disappearing and whenever I log in I get a runtime... Read more

A:Code 19 driver error


Read other 1 answers

Have managed to corrupt the driver for my DVD, Have been trying to install USB DVB stick.
Any ideas on how to repair

A:Driver error (code 39)

what the make and model of pc

Read other 3 answers

This machine had been working fine until the past month when it developed a strange practing of going through what I call machine code loops preventing the loading of Windows. There seems no rhyme or reason the the order of the screens or the means of exiting them, and the next screen is typically random.
It takes you through BIOS and various prompt screens randomly. Since each reboot since then had taken me on this journey I have dreaded the risk involved that I might not get my PC back into Windows at all, and hence have deferred rebooting it as much as possible. After an enforced shutdown it took me an hour yesterday to get it back and I feel action is needed!

The sequence is this: the reboot gets as far as a black screen with a faint image and "P5RDI-VM" which is obviously the Motherboard
"Press DEL to run setup or TAB to display POST BIOS message"
Neither button does anything at all. Neither does any of the Function keys or ALT, CTRL and DEL
If you wait 3 minutes the screen disappears on its own to be replaced by the BIOS screen.
I'm not an expert on the BIOS, but it looks ok (ish) so I escape
This leaves a blank screen with the message "reboot and select proper boot device, or insert boot media in selected boot device and press key"
I don't have boot media, but the injunction gives ammunition for a theory of mine I'll come back to later, although I have no idea if it is a sensible one.)

Nothing will shift this message eithe... Read more

A:Bizarre machine code loop preventing Windows loading

Read other 6 answers

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

Read other 1 answers

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

Read other 2 answers