Over 1 million tech questions and answers.

HP Envy 27 All-in-one (2016) replacement GPU board

Q: HP Envy 27 All-in-one (2016) replacement GPU board

I noticed from the following link that the HP Envy 27 All-in-one (2016) has the NVIDIA GTX 950M GPU mounted on a removable board, rather than soldered permanently onto the motherboard: http://h22235.www2.hp.com/hpinfo/globalcitizenship/environment/productdata/Countries/_MultiCountry/d... Is it possible to replace the NVIDIA GTX 950M GPU board with a newer GPU, like the NVIDIA GTX 1050?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Envy 27 All-in-one (2016) replacement GPU board

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 76.4

Hello, I need a replacement keyboard for an HP Envy M6-1000Found one for a HP Envy M6-K (see link for reference:  https://www.amazon.com/Cool-See-725450-001-PK130UM1F00-M6-K001XX-M6-K010DX/dp/B00ZEE3U0E)What's the difference between the two models if any, and would this key board work? Thank you 

A:Key board replacement for HP Envy M6-1000

Hello @Nat0822!If you want to change any part of your laptop, please bring it to HP Service Centre nearest your location.Hope this helps. Let me know how this goes. I hope the issue gets resolved without hassles and the unit works great.To simply say thanks, please click the "Thumbs Up"button to give me a Kudos to appreciate my efforts to help. If this helps, please mark this as ?Accepted Solution? as it will help several others with the same issue to get it resolved without hassles.

Read other 1 answers
RELEVANCY SCORE 53.6

 I recently picked up an X1 Carbon with a WQHD screen while travelling in the US.  On first boot, I noticed a column of dead pixels and promptly put in a service ticket for the issue.  As with my previous Lenovos, I buy the 3yr NBD Onsite service. Anyhow, the LCD was backordered and after a week (yesterday) the screen was replaced.  Here is where the problem starts. The original screen in the machine was:LP140QH1-SPF2 The replacement screen installed is:LP140QH1-SPF1 Both screens carry the same Lenovo part number 00HN877, but they are drastically different in quality. The original screen was paper white and very bright where I was using it indoors at 80% and in my vehicle at full brightness without issue. The replacement has whites that are yellowish and when at full brightness it is not as bright at the original screen was at 80%.  It is very dim and difficult to use outdoors. I have spent over $3k CAD for this ultrabook and I am not happy about the difference in replacement screen model.  Is there a way I can get the correct screen back in my machine?    

Read other answers
RELEVANCY SCORE 53.2

I'm going to buy a new license of one of these product, so any suggest please?
I have used Bitdefender, Avast, Kaspersky ( about 3 years ago), I haven't used Norton and Trend Micro.
 

A:KIS 2016 vs NIS 2016 vs BIS 2016 vs Avast IS 2016 vs Trend Micro IS 2016

Out of all these,and your prerequisites,I would go with Kaspersky!
PS:This is from personal experience,and other members may have varying opinions!!
 

Read other 3 answers
RELEVANCY SCORE 52.8

I'd like to purchase the 2016 HP Envy 15" (touch optional) notebook. I'm hoping to buy it in its base model configuration as seen here: http://store.hp.com/us/en/ConfigureView?catalogId=10051&urlLangId=-1&langId=-1&storeId=10151&catEntr... I'm wondering if I can purchase separately and install an M.2 SSD to run alongside the 1TB HDD.  Is there an empty M.2 bay waiting to be filled with this configuration? 

A:Aftermarket installation of M.2 SSD (2016 Hp Envy 15t)

Hi, Be carefull, buying single storage with only HDD you may ending up no M.2 slot. I saw many members did not know that UNTIL open the case. I would pay $70 more to get 256GB PCIeŽ NVMe? M.2 SSD and then add a new HDD or SSD to it for storage later. You need to buy suitable HDD case and cable before you can add. Regards.

Read other 1 answers
RELEVANCY SCORE 52.8

Hi, There is this problem with sound crackling that is happening while playing any sound. It's coming from inside the notebook even when the headphones or external speakers are used or the music is muted. Once I close all the music in computer, the crackling suddenly stops. It's been happening for about a month and the intensity has been increasing. I am pretty sure from all the above that this is a software problem. I have noticed on forums some problems about the Bang and Olufsen drivers, but it might be something different. I have already tried following: 1. update every drivers possible including bios2. reinstall and update different version of sound drivers (when I tried the newest one from Realtek website, the sound didn't work at all)3. tried every other toubleshooting that I've found on this website, including:http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/8543365/model/8903631/document/c0497314... Thank you very much for help. I use this notebook for business and can't afford to send it for service. Richard 

Read other answers
RELEVANCY SCORE 52.8

Hi, I have just purchased a new Envy 15 in New Zealand and are wondering if anyone has some photo's of the motherboard and also can confirm if my model has a SSD m2 connector.CPU-Z shows MB as a 81CCHere is a link to my model's support page if it helps. http://support.hp.com/nz-en/product/HP-ENVY-15-Notebook-PC-series/10862135/model/11612512/drivers If anyone can help, it would be greatly appreciated.CheersJeff 

Read other answers
RELEVANCY SCORE 52.8

I want to use Blender Cycles GPU rendering. It only works with Nividia CUDA cards. I have an ATI Radeon card. This card is soldered to the system board so I think swaping it is not an option. Can I replace the whole system board for one that has an Nvidia CUDA compatibale GPU on it?

Read other answers
RELEVANCY SCORE 52.8

The systemboard on my laptop went a couple of weeks ago, I found a replacement on eBay with the serial #30L2589 the number on my system board 10L0947. Are these boards compatible?
 

Read other answers
RELEVANCY SCORE 52.8

Last night I tried to replace the mother board on my Dell Inspiron 5000e laptop. I bought the replacement part from an Ebay store, and it is still under warranty (90 days). After taking apart my entire laptop and putting the whole thing back together--a job that took my friend and I three hours--we plugged it in for the moment of truth. The battery light came on, so far so good. Then we hit the power button and...nothing happened. Well almost nothing. The machine appeared to turn on. All three lights on the the bottom of the LCD went on, but that's it. The fan didn't start, the monitor didn't start. The hard drive light was on but didn't appear to be reading at all. (i.e. no blinking or noise.) I'm quite perplexed. Everything appeared to go back together perfectly with the possible exception of the diskette drive cable clip, which we weren't exactly sure whether to put back in over, under, or through the disk drive data cable. We eventually put it through. For instructions and pictures of the process, check out link:

http://support.dell.com/support/edocs/systems/pblan/removing.htm

Everything else seemed to go back together seemlessly. We were very careful with screws and put all the right sizes back into their correct places. What could be causing this? Have I received a defective part? Are there any other explanations? I suppose a possible explanation is that the processor and/or video board are not quite connected correctly, but they seemed t... Read more

A:Mother Board Replacement

Read other 13 answers
RELEVANCY SCORE 52.8

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood
 

A:Mother Board Replacement Help

Read other 11 answers
RELEVANCY SCORE 52.8

Is it possible to purchase a mother board for an older hp desk top model # P6216F if so where could I purchase one.thank youAnthony Simonie

A:Mother board replacement

Motherboard P6216F  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.        If my answer solved your problem please mark it as the Accepted Solution. Thanks!

Read other 1 answers
RELEVANCY SCORE 52.8

How to get replacement Mother board from HP

Read other answers
RELEVANCY SCORE 52.8

I have an old Gateway P5-133 computer with an Evergreen MX-Pro 200 cpu upgrade on an American Megatrends system board.
I was in the process of upgrading it with a larger hard drive, WinME, a couple of USB ports, potentially more RAM etc. and was experiencing intermittent episodes of it not booting up. My new machine's monitor, which I used while working on this old POS, was saying there is no video signal coming from the old computer. A new video adapter produced the same message, so I am assuming the system board croaked. It did boot fine following the installation of the new HD and ME.
What would be a suitable replacement if you would be so kind as to enlighten me? I can return the PCI Video and USB adapters but not the Maxtor 80GB Ultra ATA/133 drive and ME.
Regards,
Doug
 

A:Replacement System Board

GoofyGimp

Welcome to TSG! As far as a replacement board, you are probably wasting your time. My suggestion would be to keep the video you bought, the hard drive and the floppy. The rest is very outdated. Your board is a socket 5 board with no real replacement out there. The case and power supply will be of no use on a newer board (probably an AT form factor). The evergreen chip will only fit a socket 5 board and you can go much much faster with a low end $30 duron processor. The memory is probably 70ns dram and will not be able to be used in a newer board. Not really much you can save. Your choices are to look at used computer shops for an old socket 5 board or to shell out a couple of bucks for a bare bones system.

SeeYa
 

Read other 2 answers
RELEVANCY SCORE 52.8

unplugged elect cord of phone from voltage surge protection,computer went off but light stayed on.  I've been told it was my mother board,  This machine has stuff I need and I  would like very much to fix it.  Does anyone know where I can get this done?

A:MOTHER BOARD REPLACEMENT

A local computer repair shop is the best bet, but for a computer that old, it will probably cost more than it is worth.  Best option is to salvage the data from the hard drive onto a working PC.  Easiest way to do that is to remove the hard drive from the old Pavilion A6400 and connect it to a working PC.  If it is just to retrieve the data, an adapter similar to this will work nicelyhttps://www.amazon.com/AGPtek-Drive-Adapter-Converter-External/dp/B00BIE996S/ref=pd_sim_147_2?_encod...

Read other 1 answers
RELEVANCY SCORE 52.4

My system has LED Inverter Board Pegatron IL-CVB23 with part number 681680-001 . The tech guy  who told me that he trained around 100 HP technician diagnosed this board.  He told me that he has universal tester  and he applied 19V to the board and board doesn't work because the output goes from 3.3V to 0.2V . Is this approved HP procedure and is it possible to kill the board if you apply 19V to it .  Thank you for your time

Read other answers
RELEVANCY SCORE 52.4

Hi - I have found previous threads on this question but they are from a couple years ago. I have a WOU94AV (or perhaps the model nampe of Desktop-KB31R70 is better)  Envy with i7-7500u processor and the nVidia GeForce 940MX GPU. I would like to upgrade to a 1060 or 1070 GeForce, or perhaps a Quadra GPU. Is this possible and if so, which GPUs are compatible with this machine?  Thank you in advance for any help.

A:Upgrade GPU in Envy 17" late 2016 model

Hi,Your HP ENVY 17t-s100 CTO notebook Manual: Page 40http://h10032.www1.hp.com/ctg/Manual/c05369368The dedicated graphic chip is soldered on to the motherboard. It cannot be replaced or upgraded. Also if you're wanting to replace motherboard willing to spend everything, still no board with better graphic option than you already have, is listed compatible for this model series.RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 52

My original setup included an onboard videocard which copes fine with XP cannot cope with Windows 7 - apart from at the lowest resolution. I am not a gamer but would like advice on upgrading my video card. If I install a new card will I need to disable the old onboard card? If so how do I do this. What type of new card would be suitable foe Windows 7 - bearing in mind that I'm not a gamer, but enjoy watching videos, jpeg files etc. Any other issues I should be aware of? Thanks for any advice!
 

A:On Board Video Card Replacement

Read other 8 answers
RELEVANCY SCORE 52

I have an e7450 that has had what I believe to be a system board failure. It is out of warranty so I am looking at replacing the system board myself. The part number is CN-0Y15C1-12963-54I-  A0EF  REV A00.
I believe the original unit has an i5-5300U. Most of the replacement boards I'm finding online have an i7-5600U. 
Will there be an issue using the different processor if the board is still the same?

Read other answers
RELEVANCY SCORE 52

I don't think the model will matter, however, mine is a Pavilion Slimline s5510f. With thanks from this forum, I have determined that I need to replace my mother board.  I have found HP support documentation on how to replace the mother board, but that leaves the question as to whether I have to do any type of programming of the new mother board or is the MB more or less a plug and play? Thanks for any help.  

A:mother board replacement and programming?

Hi, Actually you can't do anything with motherboard (only updating BIOS which is still in the hands of vendors). What you see is what you get or using your terms: it is a plug-and-play part. Regards.

Read other 1 answers
RELEVANCY SCORE 52

[PC Specs]
AMD Athalon XP +2800
ASUS A7N8X-X
2x 512 RAmos DDR
Gigabyte 128mb ATI Radeon 9600XT
SB Audigy 2 ZS
1x 40gig WD Caviar (7200rpm)
2x 200gig WD Caviar SE 8mb (7200rpm)
2-Port Serial ATA/133 IDE Controller Card


[Problem Description]
PC won't boot. Power (when connected to everything) only powers up motherboard and any cards attached to it. IDE drives show no sign of life.
However, if you disconnect IDE cables from the motherboard the IDE drives come to life.
If you disconnect power from the motherboard, and hotwire the motherboard power plug, the IDE drives will power up.

Tried motherboard with 3 different power supplies, same problem with all of them. Can't check CPU as don't have any other boards. Memory is fine, or appears to be as changing them made no difference.

Tried the board without any PCI (except agp graphics) cards plugged in, still had the same problem.

Not sure what else to do.

[Scenario]
I moved to London from Melbourne Australia and had to get my PC shipped over. I would have taken it on board as hand luggage, but i wasn't allowed, so I had to have it freighted over as excess baggage on another flight.
It had plenty of padding so I thought it would be fine. It looks as though everything was fine except for what appears to be one largish dimple in the cardboard where it looks like it hit something. So there is a possibility of damage.

Any ideas anyone? I probably should have posted this under didou... Read more

A:A7N8X-X no boot, board replacement?

You might try a different IDE cable. Don't know why shipping should create a problem but that would be my next quick try.
 

Read other 5 answers
RELEVANCY SCORE 52

Hi all I have damaged by X260 (Model 20F5S4BY00) and need to replace the system board. Currently it has part number 01YT045 board installed. I've found a more reasonably priced board on eBay with part number 01HX027. Is this compatible? Thanks in advance 1enny

A:X260 - Replacement system board

Hi 1enny,
 
Welcome to the Community Forums.
 
Checking with recommended substitutes specific to MTM 20F5S4BY00:
 
Part number 01EN201 WV3 FRU IntelŽ Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
Part number 00UP198 Wolverine 3 FRU IntelŽ Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
Part number 01HX035 WV3 FRU IntelŽ Core? i5-6300U Processor (3M Cache, Up to 2.40 GHz), WIN, Y-AMT, Y-TPM, Dock
 
Part number 01HX027 (via part search)   
WV3 FRU IntelŽ Core? i5-6200U Processor (3M Cache, Up to 2.30 GHz), WIN, N-AMT, Y-TPM, Dock   (01HX027) is compatible with the following machines:THINKPAD-X260  20F5 , 20F6  just like 01YT045 (original board). Differences may be on some detailed parts but should work in general.
 
Hope this helps answer your query.
 
Regards
 

Read other 2 answers
RELEVANCY SCORE 51.6

What is the correct procedure for replacing the MB battery? Power off? etc. I have a alton m760v MB that reverts back to cmos defaults after being unplugged for a couple of days. Is this normal, I have 2 that do the same thing. Old batteries ?
 

A:Mother board battery replacement procedure?

CMOS should only reset if there is something wrong, or if a battery is bad.

Replacing it is just as you said - unplug power, take out the old one, put in the new one.
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hi, Can you help me? I need to find out the part number and where to order a motherboard for a HP Pavilion G6-2291sa model. I realise these might be hard to find nowadays. Any help would be greatly appreciated. Regards, Kenneth

Read other answers
RELEVANCY SCORE 51.6

Is it possible to get a replacement system board for a Dell XPS 16. My LCD screen is blank, and external monitor shows garbled images, so I am assuming the graphics chip is blown, and as it's integrated, I would need a new system board.

I am UK based, and am happy to fit myself.

A:Dell XPS 16 (1645) system board replacement

Hi,
Thank you for writing to us!
Kindly run complete diagnostics on the system to check for errors.
Provide us with the service tag and email address.
Thanks
Robin

Read other 3 answers
RELEVANCY SCORE 51.6

I have an Emachine T-3092 and need to replace mother board and CPU potentially due to a failure. Have not replace one before. Need to know suggested motherboard as I could not find it on E-Machine website. Thanks.
 

A:Emachine T3092 Mother Board Replacement

You will most likely end up replacing everything except the case. Any ATX or mini-ATX board should fit. How many PCI slots do you have now? 3? The power supply should be changed while your at it... Just deside what processor and memory you want to use, and select a motherboard that will run it.
 

Read other 6 answers
RELEVANCY SCORE 51.6

My X1 died on me and, according to the sheet of paper that came back from the repair center, had its system board replaced. Unfortunately, when booting, I get a prompt for a bitlocker recovery key - and the key I have (confirmed with Microsoft) is not working. The key id shown on the recovery screen is also different. I've spent about 40 minutes on the phone now with Lenovo support, and haven't gotten anywhere - how can I get back into my machine? It would appear that, since the hard drive was not replaced, I should still be able to get in with my existing key, or am I missing something there?

A:Locked out of bitlocker after system board replacement

https://social.technet.microsoft.com/Forums/windows/en-US/d7be2e19-3eb2-4e7f-8d6a-c7f0f5474b93/bitlo...

Read other 2 answers
RELEVANCY SCORE 51.6

Hello, I recently bought a faulty Acer S3-391, that I wanted to fix. The problem was with the iSSD board, as soon as you turned the PC on, the board started overheating, one of the chips was faulty, from measuring the heat, I guess it was either power regulating chip, or the ssd controller chip, the device turned off after about 30-60 seconds after that. Since the price of this board is aproximatelly as high as an entire functional laptop, I dediced not to buy this one, but the similiar one, that had a mSATA slot and integrated wifi, otherwise it looked the same, connectors were also the same and it fitted the notebook nicely, everything went smooth, but I encountered a problem when I turned on the laptop. the battery wasnt charging. I measured the voltages on the battery and of the three cells, each had 0.8V, which means about 2.4V together, missing 8V for total 11.1V as the battery specs say so.I left it recharge over 24hours, but nothing happened, any ideas? Thanks

A:Acer Aspire S3-391 iSSD board replacement

Was it charging before you replaced the "iSSD board"? If it was, then the board is the problem.Maybe the "wrong" board is causing something to get crossed or shorted.

Read other 5 answers
RELEVANCY SCORE 51.6

About a month ago my main board (GA-Z77X-UD3H) started to fail for some odd reason and ive been wanting to replace it since, but now ive beought myself a mini itx RVZ01 case and SFX-L power supply to make a small gaming oriented build and finally replace my motherboard, but i cant seem to make up my mind on which motherboard to buy, having in mind that im running on a gtx 670 and an i5 3570k processor, which is not that powerfull for todays standars, and i dont want to waste a lot of money.

My initial thoughts were on buying this motherboard
Amazon.com: ASUS DDR3 Intel Z77 2400 Socket Motherboard P8Z77-I DELUXE/WD: Computers & Accessories

but then again ive found a lot of cheap options like this
Amazon.com: ASUS P8H61-I R2.0 LGA 1155 Intel H61 HDMI USB 3.0 Mini ITX Intel Motherboard: Computers & Accessories

My main concern is that the cheap alternatives wont keep up with the gpu and cpu and i dont plan on making any serious upgrades since i would have to replace the entire pc components for it to be worth the huge next gen investment. (EDIT) Ill post my original specs somewhere; not using win 7 anymore btw.

So my question is: Any suggestions? What should i buy? (having in mind that im using an 1155lga cpu and a mini itx case) Im looking for anything under 200$ but when it comes to choosing i simply cant make up my mind and would really appreciate some help.

A:Need suggestions on a Mini ITX 1155 board replacement.

I just bought and installed the Asus P8H61-I R2.0 board to build a new system using some old parts I had lying around (an i3-2100 cpu and 4GB of DDR3 memory.
It is very impressive board, and Asus has an excellent reputation.

One thing about this MB, it only has one expansion slot (a PCIe x16) so you can add your graphics card if you want but that's it.

Read other 2 answers
RELEVANCY SCORE 51.6

I have a HP Pavillion x360 (13z-a000) that I bought two years ago.  The CPU is dead.  The computer does not power on and the Caps Lock button blinks constantly (single blink).  I brought it to a local shop and they confimed this but they do not fix HP.  If it is the motherboard, can I just buy one and replace it myself?  Where can I buy the mother board?  How do I find the part number?  
 
The serial number is [Personal Information Removed]
 
Larry

A:Pavillion x360 mother board replacement

Here is the Manual: Service Manual There are 4 different AMD motherboard depending on if you have the A8 processor or the A6 and Windows Standard or Pro. Get the same Windows version as you have or you will have to buy another copy of Windows. Your hard drive installation of Windows will not activate unless you install a motherboard set up for the same OS version. Post back if you need a more detailed explanation. Yours is a CTO laptop so we cannot just look up your original factory specs. You can interchange the A6 and A8 version of the motherboard with the caveat stated above. The Manual shows the "how-to" on replacement. Assuming you have the A8 and Windows Standard this is the part number: 769075-501 This is it on US amazon.com for $109 which is a pretty fair price: https://www.amazon.com/HP-Pavilion-Convertible-Motherboard-769075-501/dp/B0118AZL1S/ref=sr_1_1?ie=UT... Post back with any more questions.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 51.6

I have to change the motherboard of the above laptop and would appreciate indications on the manufacturer of that part and serial number. Best regards Michel Bellier

Read other answers
RELEVANCY SCORE 51.6

My motherboard died on my X1 Carbon Gen 1.  I sent it to lenovo and the repair estimate was ~$750.  I decided to replace it myself but the part for my system FRU 04X0495 (W8P,i7-3667U,8G,F,AMT,TPM,MT) new are quite expensive.  I found a new systemboard FRU 04Y1988 (W8P,i7-3667U,8G,F,AMT,TPM) at a much more reasonable price and installed that.  I now have a working machine (new machine type 3448-3Y2) but no touchscreen (I assume the MT stands for touch monitor or something).Question, and I think I know the answer, Is there any way to convert or add to my new systemboard the touch screen capability?  I assume it is not just the driver?thanks, 

Read other answers
RELEVANCY SCORE 51.2

Hello all!
 
I just recently brought my laptop in to be looked at/repaired. The local technician told me that my laptop system board died due to the Windows 10 updates not playing nice with my old Windows 7 operating system (originally, my laptop had Windows 7 Home, last July I upgraded to Windows 10). I have started to look for a new replacement system board, however I have a few questions. I looked at the service manual for my laptop and can't figure out which replacement system board is adaquate/what they all mean. The serial number of my current system board in my laptop  is 720566-001. I googled this system board number and keep finding results with 720566-501 and 720566-001 in the title for the same system board. Most boards I find on eBay also have the number as 720566-501. My question is this: Will I be able to use a 720566-501 system board to replace my current 720566-001 system board? 
 
Additional details:
 
-12 GB RAM
-Intel I7 2.2 Ghz processor
-1 TB SATA Hard Drive 
-GeForce Graphics Card (not sure which type)
[Personal information removed]
-Product No. E1P05AV











Solved!
View Solution.

A:HP Envy 15t-j100 System Board

Hi, There are dozens (if not hundreds) of HP Envy 15 models/products around, your machine is an HP Envy 15t-j100 which is a CTO machine. You can see 720566-501  is for many different models/products:      http://partsurfer.hp.com/Search.aspx?SearchText=720566-501 for your machine its part number is 720566-001. 720566-001 and 720566-501 may be VERY similar but not the same. Regards.

Read other 10 answers
RELEVANCY SCORE 51.2

I have to substitute the screen on my non-touch dell xps 13 (DP/N 0DJCP6  , Sharp LQ133M1JW21 screeen)and am wondering what screens are compatible with my laptop. 
would the touch or not touch screen of the 2015 model be compatible? 
I am sorry for posting on the wrong group, but i could not find the post button neither on the desktop nor on the laptop group. 

A:Dell Xps 13(2016) - Screen replacement and compatibilty. Could not post to proper group.

It looks like the XPS 9350 and 9360 both use the same panel, yes.
And while you likely can upgrade to a touchscreen, remember you can't just replace the screen - everything above the chassis (keyboard) has to be replaced as a unit - screen, touch glass, hinges, back cover and cables.

Read other 1 answers
RELEVANCY SCORE 50.8

Hey, About 5 months ago i decided to swap my HDD for an SSD, for some extra speed. However, when opening the laptop i broke the ribbon cable off the power button board. In the last 5 months i tried buying a replacement from ebay. I have bought boards from 3 different sellers, and not one of them worked. They all showed the same behavior; plugging and then unplugging the cable from the motherboard started the computer, and as soon as i put the cable back in, the computer shut down. I used a multimeter to see what was going on, and it turns out the new boards did not switch anything, whereas the original board switched when the button was pushed (of course). Is there a way i can purchase an official replacement?  Thanks in advance!

Read other answers
RELEVANCY SCORE 50.8

Where can I buy a replacement ST6 power board.  FRU no. 90004328.  Based in Ireland  

Read other answers
RELEVANCY SCORE 50.8

I replaced the system board on my IBM thinkpad 600E because the original problem was that everytime the system booted up it would keep going to the time (time would not stay). I know that there is a battery on the system board but I figured it would be less of a hassle if I just replace the system board. I did that and now the system will not boot up. The LED's come on and I hear the fan run but nothing will show up on the screen. What should I do?
 

A:IBM Thinkpad 660E will not boot after System Board Replacement

Are you sure the replacement board was not broken? Maybe you did something wrong when putting the thing back together again?

Just take the thing apart again and try your previous mobo. If that works, try with the new one again.
 

Read other 3 answers
RELEVANCY SCORE 50.8

I am trying to find a replacement graphics card/board that will fit into a HP Slimline Pavillion Computer.  It currently has a NIVIDIA Geforce G210 graphics card with DVI and HDMI only.  The card is workign fine but hte fan on the card makes alot of noise.  So I am afraid it is going to go out.  I can't find an exact match anywhere and trying to figure out one that will fit back in this slimline case.  Here is the information on the current card:  ZOTAC 210 Synenergy Edition 512MB 64 Bit DDR2.  Part Number 288-10N44-240ZT. 

A:Replacement Graphics Card/Board for HP Slimline Pavillion

Hi: I would go with the nvidia GT 610 low profile which took the place of the 210 and it draws about 1.5 W less power. https://www.amazon.com/s/ref=sr_st_price-asc-rank?keywords=geforce+gt+610&rh=i%3Aaps%2Ck%3Ageforce+g... You may want to get one with a passive heatsink.  No fan to conk out on you, and since it has no fan it is silent.

Read other 1 answers
RELEVANCY SCORE 50.8

Hello all , I'm new here , almost as new at poking around inside my computer , at this point its nothing lost nothing gained ..... I have read several hundred posts of others who also fell victim to these substandard machines .. An e machines label wont be on my desktop again ... even if its case is blotted out with whiteout ......... Anyway enough rant , I'm here for your help .. I have an model T6420 ... amd athlon .. failed power supply that took the motherboard with it , originally a 2.2 - 64 bit .... 1600Mhz ... 1gb (512x2) machine , msi 7207 MotherBoard ...... I have looked at options , and due to purpose or use of it I remain torn as to the best way to replace it.... seems Cputopia com , On Sale , has a motherboard , ( basic single core board , processor and processor fan for a bit over a hundred dollars , dependent on options selected .. they also have a box (case) , processor , board and power supply for around 200 + dependent upon how equipped.... while the power supply upgrade , is $14 at one page its $19 at another , No big deal about that ... Anyway .. my other option is to get a sole independent , board with the same socket as my oem processor /motherboard and reuse my Atlon Processor - HD - DVD-Cd ...and , new windows7.program . as such , Now the crux of the problem is... I have seen T6420"s listed here and elsewhere , as , having come from the factory equipped as ... socket and processor .. 754 ... as well as 478 ... How do I know or how ... Read more

A:Unknowing victim of emachine, board replacement, socket 754/478

Dude, get a grip. I know less about computers now than before I read your post.

I thought that socket 478 was Intel (Pentium Celeron), now I come to find out that it's AMD.

An AMD Sempron 3000 only comes in one speed, if it's another speed, then it has a different number.

All of the s*** you mention is beyond obsolete, so maybe it's time for a whole 'nuther computer. Please, I heartily suggest that you avoid attempting to build a machine, at least in your current state of mind.

I don't think that any of us here are really equipped to deal with the anxiety, angst, or incoherent and rambling thought patterns you have exhibited thus far, let alone what you're trying to pass off as sentence structure.

BTW, my Emachines T-5026 just reached its 5th birthday. If you'd like to check in and wish it many happy returns, (pun not intended), here's the link; http://www.techspot.com/vb/topic143315.html

I would argue that it is not really possible to be an "unknowing victim" of Emachines.

You bought it because it was cheap, cheap s*** breaks. So where's the surprise, the mystery, or the unpredictability?
 

Read other 1 answers
RELEVANCY SCORE 50.8

I have been informed the Daughter board needs replacing to enable the chromebook to charge but havin problems locating a replacement

Read other answers
RELEVANCY SCORE 50.8

Dell Optiplex GX270 with P4, 2.8-GHz, socket-478 processor.

I have a Dell Optiplex GX270 sytem with a bad board (several swollen, bleeding, and bursted caps). I went to Pricewatch.com and did a search for Dell Optiplex GX270 motherboard and came up with boards in this link:

http://www.pricewatch.com/search?q=dell+optiplex+gx270+motherboard

They are all for Optiplex GX270; but, some seem to have different other numbers associated with the GX270 and I am now not sure if I can use just any one of these or if I should choose a certain one of the group,

Example: One says GX270 (FG015), another says GX270 (X1105), and another GX270 (U9268), another GX270 (DG279 and finally GX270 SFF(T7294).

Do these other numbers make any difference? I don't see any nombers that resemble those on the bad board I have here.
 

A:Need help selecting replacement board on Dell Optiplex GX270

Read other 10 answers
RELEVANCY SCORE 50.8

Hello  All    issue    with   system  board  replaced  for t460s   unitsboard  coming   from   lenovo works  ,, the  product version fieldis populated to  t460    not  t460sanybody  knows  of a utility    to  correct  that  ?Lenovo  tech  support   does not  have a proper  answer 

Read other answers
RELEVANCY SCORE 50.8

Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.
 
 
Moderator comment: New post created. Subject edited. Was: Re: Replacing motherboard myself - OR - Repair motherboard













Solved!

Go to Solution.

A:W530 - manual; mother board replacement; GPU failure

Sparky5 wrote:
Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.

Welcome to the forum!
 
GPU is soldered, meaning your're right about needing to swap the complete motherboard. You can download the HMM (Hardware Maintenance Manual) from here: click me!
 
Good luck with the swap! 
 
-
 

Read other 1 answers
RELEVANCY SCORE 50.8

Hi,

I have just installed a new motherboard on my F10-124.
This was the upgraded PCB P000415760 (Part number P000454980) as the graphics card failed - again!!

The documents that came with it tell me to update the Bios, EC/KBC (SVP Parameters) and write the new DMI. At the moment the VGA controller is not recognised, and no CD drive is listed.

Can this be updated by myself, without having to send it away to an ASP, as its not worth the money if I do. I just want to use this as an additonal PC for my daughter to use.

Surely I should be able to update the Bios from a download or something from the toshiba support site.

Any help appreciated.

A:Qosmio F10 Main Board Replacement - Update BIOS etc

The new BIOS is on the Toshiba website, and I believe a different Recovery Disc needs to be used.

Or you can simply install Ubuntu, which should detect the hardware automatically. http://www.ubuntu.com/

Read other 3 answers
RELEVANCY SCORE 50.8

Hi guys, I have got a system board damage, so I need to exchange it. I have never done it before, so I'm struggling with findings of correct part for exchanging to. As far as I understood FRU number of the system board is what I need. I have found one which says 04x5166 right next to the RAM slot. Is it the only reference I need to use to find a right part? I have found a part on eBay, where in description it is written 04x5166 and three different numbers. You think this one should fit? https://m.ebay.com/itm/QTY-1x-Lenovo-Thinkpad-X240-laptop-motherboard-intel-i7-4600U-VIUX1-NM-A091-/... I would really like to try to repair my old friend first before going for an expensive new machine  lookign forward to hear from you! Anton

Read other answers