Over 1 million tech questions and answers.

Local Access Only...When Secured

Q: Local Access Only...When Secured

I've had my laptop running securely on a network utilizing a Linsys router with no problems. I've had to move and also had to leave the Linksys router behind. I'm now using a Dlink DI-524 router. When I connect to the network unsecured, everything is just fine. When I secure the network using either WEP, WAP, or WPA2 suddenly I can only connect locally. I'm not sure why this is. I am running Windows Vista. Any help would be appreciated. Thanks.

Oh and I am using DHCP.

RELEVANCY SCORE 200
Preferred Solution: Local Access Only...When Secured

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Local Access Only...When Secured

Read other 12 answers
RELEVANCY SCORE 60

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled

Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet. I get a Local connection only on the networking screen. I have tried WPA and WPA2 with TKIP and AES encryptions.

It also will not connect using the ethernet cable on any settings.

This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.

Any ideas? Thanks,
 

A:Solved: Local connection only when connected to secured wirless

Read other 10 answers
RELEVANCY SCORE 57.2

Hi Tech Support!

About 3 days ago, I stopped having access to sites such as Hotmail, Facebook, eBay on my laptop at home. The pages will not load for me but other sites (such as this one, thank goodness!! can be accessed)

Please help me as I won't be able to check my hotmail at work either as that is blocked too.

Let me know what I have to show you guys as I am very computer illiterate.

Thank you so much!

A:Unable to access secured sites like Hotmail/Facebook/eBay (but able to access others)

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 54

One of our field offices previously created an Access 97 db with security features, and the person who created is long gone.

Now our company is in the process of upgrading to XP. Microsoft's knowledgebase claims that all we need to do is: 1) add back permissions to all users/groups for all objects, 2) add Admin to the Admins group, and 3) recreate the .mdw file on the XP machine using the new built-in Workgroup Administrator. (Copying the Access97 .mdw file to the XP machine doesn't work.) The field office was able to do steps one and two, but step three requires them to know the EXACT Name, Organization, and Workgroup ID that were used in the original 97 db.

QUESTION: Is there any way to look inside that original system.mdw file to see that information?

I've already told them to try copying the objects from the orginal db into a blank 97 db, then converting that one, but they still get an error message about "incorrect password". The users swear that there was no password protection set (and they are able to open the db without entering a password in 97.) help?...
 

A:Converting secured Access 97 db to XP

Hi, Girl.

Look at the shortcuts they used to get into the DB before.
They likely had their usernames "built in" to them to connect to the system MDW. But if they tried to log onto the DB from someone else's PC while logged in under THEIR username, it wouldn't have worked.

That's what I suspect...and it's a fairly common practice to auto-get the user who's on. You can even put the password in there, but I forget what the syntax is.
 

Read other 2 answers
RELEVANCY SCORE 54

I upgraded to win 2000 and i lost the ability to access my banking sites logon pages, what do i do?

A:help, i can't access secured sites

Check what sucurity settings you have. Click on tools, internet options, privacy. It is best to have it on medium.
Though, this will not apply if you arn't using IE. You would have to do something else. Are you using Internet Explorer? If not, what do you use? Have you tried a alternative browser?

Read other 3 answers
RELEVANCY SCORE 54

Hi,
I have a problem with accessing secured wireless network using my laptop. when I try to connect the laptop to the wireless network, the router refuses the credential even if it's correct. I think that this is a something related to the encryption method but I don't know how to change it because the network is not exist in the "Manage wireless network" screen, so would you please help me

thank you

A:Can't access secured wireless

Find a way to get into your router (Ethernet cable?). You're probably right, sounds like an encryption setting, maybe a mac address filter?

Read other 4 answers
RELEVANCY SCORE 54

Hi,
I really need some assistance here!! All of a sudden with my computer working just fine, i can't access certain sites. My yahoo works fine, craigslist fine. Netflix no, facebook no, I am so confused. I don't want to start playing around pretending to be a specialist but can someone please give me some suggestions??
Thanks!

A:Can't access secured websites

Do you get any message when you try to open? Can you get into any HTTPS: (Secure) sites. Can you get in using a different browser?

Read other 2 answers
RELEVANCY SCORE 54

I have a NAS drive with both several unprotected folders and one protected folder. I have no trouble accessing the unprotected folders from Win10, but I cannot get access to the protected one. If I click on the secure folder from File Explorer I get the popup

I enter a userid and password as defined on the NAS . The popup disappears for a few seconds; then a very similar one pops up:

It says "connecting" and doesn't say "Access is denied", but never goes beyond that. I'm a bit puzzled because it looks like Windows is asking for credentials for the whole NAS rather than for the secured "share" within the NAS. I have no NAS-level security set up.

BTW, I've been able to access the unprotected shares with no trouble for years - both from Win7 and Win10. I've been trying using the protected share for only a couple months and have had mixed results. Sometimes I succeed, but usually I fail. I can find no errors logged on either Windows or the NAS.

Read other answers
RELEVANCY SCORE 54

.....specifically....http://www.thelotter.com....i can't sign up or play or anything....and i'm not some loto freak, this is just anoying! !
why me and why just this site???
this is my hijackthis log

Logfile of HijackThis v1.99.1
Scan saved at 21:39:53, on 24.4.2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\ZONELABS\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Acer\Empowering Technology\ePower\ePower_DMC.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\PROGRA~1\LAUNCH~1\LManager.exe
C:\Acer\Empowering Technology\eRecovery\eRAgent.exe
C:\WINDOWS\eHome\ehmsas.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Google\GoogleToolbarNotifier\1.2.1128.5462\GoogleToolbarNotifier.exe
C:\Program Files\DNA\btdna.exe
C:\Acer\Empowering Technology\Acer.Empowering.Framework.Launcher.exe
C:\Program Files\ATI Technologies\ATI.ACE... Read more

A:cannot access secured sites....

i see people have looked at this post....please help...i cant sign up for paypal either.....
and i've tryd all the usual advices...

Read other 9 answers
RELEVANCY SCORE 54

I have been having this problem since I got rid of many viruses on my computer and updated the Microsoft Security patch. I contacted Microsoft and they said they believe that there is some spyware blocking me. To be clearer it is blocking me from all secured pages and my newly updated MSN Messenger and Yahoo Instant Messenger while my AOL IM has no problems connecting whatsoever. I have attached my HJT file another thing I recently found when downloading Spybot that DSO Exploit is on my computer..could this be causing the problem....
Thanks for any help,
Jacques

Logfile of HijackThis v1.98.0
Scan saved at 22:18:30, on 21-Jul-04
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\carpserv.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\windows\system\hpsysdrv.exe
C:\Program Files\HPQ\One-Touch\OneTouch.EXE
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\NETGEAR\WG511\Utility\WG511WLU.exe
C:\WINDOWS\system32\HPConfig.exe
C:\Program Files\MUSICMATCH\MUSICMATCH Juke... Read more

Read other answers
RELEVANCY SCORE 53.2

I upgraded from Windows 2000 pro to Windows XP pro.
On one of the physical hard drives, I had secured a folder so only my login could access it. The main hard drive containing Win2K was formatted and XP installed on it. I forgot to unlock the security attributes on those folders and now I can't seem to access them in XP!
Any help would greatly be appriciated.

Jake
 

A:Access secured folder from 2k after installing XP

Sometimes this works. As the new administrator in XP, use MS Backup to backup the files to another location on the hdd. Then use the restore function to put them back in the administrator's my documents folder. Now see if you can remove the encryption.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I am able to access any site on the Internet except the secured sites (banking sites, credit cards, etc). In this example, I have tried to access the Bank of America website. I am using Google Chrome and IE 8 and the message that I get is:

This webpage is not available.

The webpage at https://www.bankofamerica.com/index.jsp might be temporarily down or it may have moved permanently to a new web address.

This message is what I get from all of the secured sites. It seems that its any site that begins with "https://".

I've tried running the Malware Bytes, Spybot S&D, etc and they found some, which I removed or fixed. Still no luck. I also did the "regsvr dll" changes that I found from the previous "Unable to Access Secured Sites" and still no luck. I've checked my Internet Options and also followed the steps to "fix" the problem (from another message board). Again, no luck. I've even tried restoring the point to a time when I last used a secured site. Again, no luck.

I'm desparate and was wondering if there is anyone that may be able to help me so that I can regain access to the secured sites. Please help!

A:Unable to Access Secured Sites - 2

Have you ever been able to access secure sites ? If so, did something happen just before it stopped working ? New router ? New hardware ? New software ?

Do you have a router ?

Have you tried resetting Internet Explorer back to factory default ?

Umm, check your Services. Maybe the malware disabled something necessary to run encrypted stuff. Are you currently using Selective Startup (msconfig) ?

Read other 9 answers
RELEVANCY SCORE 53.2

Ive been trying for a long time to access a secured network on my laptop. I entered the correct network key, but when I hit 'connect' it just tries to connect for a while and then times out. I have tried using Network Connections Troubleshooting and 'network setup' to no avail! My laptop is the only one in the house that isn't able to access this network. I really don't understand why! Can someone help please?
 

A:I cant access a secured wireless network! HELP!

Read other 12 answers
RELEVANCY SCORE 53.2

I had an old(er) computer running XP and had files-mainly pictures (jpeg)-that were secured using the basic windows security and were password locked. I am not able to retrieve those pictures now as I have had to reformat the drive(s) multiple times and reinstalled the OS. It says I do not have permission to do so even though I had the same user name and password. I need a way to disable the security from an "unauthorized" computer from which I am using now. Any ideas or suggestions?
 

A:Can't Access Secured Files from Old Computer

Read other 9 answers
RELEVANCY SCORE 53.2

Whenever I go to a site that has secured access such as public records, looking up my personal accounts with companies or even to shop on line with secured info, I get denied access, unable to access site. ??????? Thanks for your help and/or any information you can provide on this matter.
 

A:Solved: SECURED ACCESS DENIED

Read other 10 answers
RELEVANCY SCORE 53.2

Using Access from Office XP.

Hello,

After a colleague accidentally deleted about 100 records from our database we have recently used the "User and Group" permissions to restrict the user account from making any deletions.

The problem I have is with updating the DB. Until we used permission any changes would be made by copying the DB onto my desktop, making the changes then exporting any changed forms, tables etc into the "Live" DB at the end of the day when nobody else is using it.

Now with the permissions set a copy of the database will not allow me in, it comes up with the "You do not have permission..." error message without allowing me to log in.

Any ideas?

TIA
SBF
 

A:Solved: MS Access - Secured Database

Read other 8 answers
RELEVANCY SCORE 52.8

Hi everybody!

I am having a problem and the answer eludes me. When ever I try to login to my MSN account or my personal Ebay account the webpage times out after a few minutes. I ran spybot, ad-aware 6.0 and deleted any infected items. But unfortauntely the problem still exists. I've been trying to figure out this problem for some time but as of now I'm kinda frustrated and not sure what else to do.

Any advice you guys/ladies could give would be appreciated!

-Jim

Here's my hijackthis log:
Logfile of HijackThis v1.99.1
Scan saved at 8:58:35 AM, on 4/11/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\WINDOWS\soundman.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\Common Files\Presentia\LSvr.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb05.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Bpt\BPT.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exe
C:\PROGRA~1\Live365\Radio365\Radio365TrayAgent.exe
C:\Program Files\Snack... Read more

A:Unable to access some secured websites/hijacklog

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

Please be patient with me during this time.

We also suggest that you Subscribe to this thread to be notified of fixes as soon as they are posted by our Team. You can do this simply by clicking the "Thread Tools" button located in the original thread line and selecting "Subscribe to this Thread".

Read other 4 answers
RELEVANCY SCORE 52.8

hi, I had this problem last week, it persisted for several days, but I was able to use system restore to fix it. Today, it has re-occured, and system restore hasn't worked. I went to Microsoft.com, downloaded Adaware, it detected a trojan virus. I followed directions to get rid of it (safe mode, disable system restore, update virus definitions, run a full scan) Trojan has been eliminated, but I still can't access my bank site, AOL IM, or Casino on Net. System Restore now won't go back since I enabled it again. I can, however, get email. Last week, I couldn't get email, so perhaps this is a different problem? I have followed directions on the Cannot Find Server page, checking Internet Options, Settings, LAN connections, etc. None of this has helped. Do you have any suggestions on what the problem could be? I would appreciate any ideas.
 

A:Can't access secured sites-Cannot Find Server

Read other 15 answers
RELEVANCY SCORE 52.8

Hi,
My Computer was working fine till a couple of days ago but now I am not able to connect to any of the secured site. (sites with https:\\)..Can anybody help me out. I am also not able to log into yahoo messenger.
I am completely unaware about internet threats and how to resolve them. Please help. This is kind of urgent.
 

A:Unable to access secured internet sites

Read other 9 answers
RELEVANCY SCORE 52.8

Hi,
I recently replaced my hard drive and now I'm having problems restoring my database. I'm using Office 2000 on an XP Pro machine. I saved 3 files:- secured.mdw, db1.mdb and db2.mdb when i open db1 i see my form but when i click on any of the buttons i get an error message saying the path to db2.mdb is invalid (shows the old path.) The person who originally setup the database for me i no longer have contact with. My username and password work fine and i have admin rights. db1.mdb is a form with a number of buttons but has no editing features ie. unable to re-link tables. In fact the only thing i can seem to do with the form is change to design mode. I have used wrkgadm.exe to join the workgroup successfully but it hasnt changed a thing!
 

A:How do I restore a secured,split Access database?

I think you will ned to go into the design click on the button and look at the properties and change the path in the OnClick properties in Event
 

Read other 3 answers
RELEVANCY SCORE 52.8

Is it possible to rename a secured Access 2000 database without messing-up the security permissions?

A number of employees (including myself) are using a secured database that I created. I want to change the name of the database but I'm worried that the .mdw file isn't going to recognize the name of the new database. Therefore the security permissions may get messed-up. That is my concern anyway... I used Access 2000.
 

Read other answers
RELEVANCY SCORE 52.4

Help.. I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet.

However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key". "The network PW needs to be 104 bits- to be entered as a 5-13 ascii character or a 10 -26 hexadecimal characters".

FYI.. I went to the accessible desktops PCs an reviewed each of their " wireless properties" Advanc ed Settings which read -Netwk Auth. - WPA2-PSK & Data Encryp- TKIP.

However, the EX Prof. pc 's Wireless Advanced Settings options only have as options WPA-PSK & WEP settings.
I imagine that this anomily is the reason I can't access the Internet on this PC?
 

A:Unable to access Internet via secured Wireless setup

Read other 6 answers
RELEVANCY SCORE 52.4

HELP! I installed a msn email account so no one would have access to my emails. Now i downloaded msn messenger and the little symbol in my toolbar, now lets anybody on my computer look into these emails!! All of a sudden, the page does not request my password anymore!!And it shows, that i have an email address there. Is there something to be able to block this "access for everyone"! I do not even want my msn email to be seen on this computer!
Thanks for your help! M
 

Read other answers
RELEVANCY SCORE 51.6

Okay, here's the shpeel...My client has a hp tablet notebook using xp tablet edition OS. (Her laptop from her work.) The wireless router that she is using at home is a belkin wireless N. She is able to access internet from the router fine when it's unsecured however, when I do secure it, no matter what I set it to whether it would be wpa or wep, it doesn't connect to any sites. I'm able to ping to the router, but not externally. I've tried resetting the router a few times but that didn't work. It does say, that I am connected to the SSID even though I'm unable to connect to the internet. I also tried using the intel pro wireless utility instead of using the windows wireless utility, but still no go. There's no issue with the router because there are about 4 macs on the network that access the router wirelessly just fine with or without encryption. I'm just using plain 'ol dhcp. Everything's pretty much default standard settings with the router. Does anyone know what's causing this issue?
 

A:Solved: Unable to access internet wirelessly using any secured encryption

Read other 7 answers
RELEVANCY SCORE 51.6

I need to disconnect from my wifi and reconnect again everytime it happens. Any solution for this?
 

A:HELP: Wifi showing No internet access, Secured every 10min (Moved W10)

Read other 6 answers
RELEVANCY SCORE 46

Abruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.

A:Local access only - router not allowing access to internet

Hi brhanse,

Can you give us the make and model of the router. Also, do each of the computers connect directly via a cable to the back of the router; (example, there are 4 ports on the back of the router and each port has it's own cable leading to each computer) or, does the router connect to a switch and the other computers connect to the router through the switch?

Has this suddenly happened or have their been intermittent issues with connectivity recently?

Read other 4 answers
RELEVANCY SCORE 43.6

Hi all, this originally started with an issue with the wireless. I recently installed a D-Link DIR-515 wireless router and did a basic setup, giving it WPA2 security. My Vista computer originally was able to connect to the router with Internet (and before that, to the modem directly with Ethernet), but it was infected by the Vista Security 2012 virus, which I removed after following some steps and MBAM. Since then, it can no longer connect to the wireless network, so I Googled the issue, and did a few things:
- Norton Remover,
- In command prompt, ipconfig and netsh + .... (some commands that reset/refreshed IP/DNS or something along those lines)
- Going to wireless settings and disabling ipV6
- Going to wireless setting and manually giving it an IP, Default Gateway, DNS (according to the specs that I found by using ipconfig on my working Windows 7 laptop)
- Updating the Atheros driver to version 9.1

Somewhere along the way, I must've nipped something important somewhere, because now the Vista machine doesn't connect to the internet wirelessly NOR with the Ethernet cable attached! The icon in the lower right hand corner shows that the machine sees the router, but with Local Access only.

I've done an ipconfig /all with the machine and here are the results (this is with ethernet attached):
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Nam... Read more

A:Vista computer had "local only" access with wireless, now "local only" with ethernet

Read other 16 answers
RELEVANCY SCORE 43.6

So to paint a picture of whats going on I have a Hp compaq presario cq50-210us that came equipped with the windows vista operating system...Ive had the laptop aproximately 4 years give or take about a couple months ago I had a blue screen issue which forced me to completely go back to factory settings without saving ANY programs pictures documents ect that was on my laptop because u could not get passed the blue screen . After my laptop seemed to be working fine although I lost all my programs files and ect that did not come with the laptop...not sure if that is relevant to my current prolem but I figure a little history never hurts Ok so heres the problem...since I havent tried to use my wifi because I had moved to a new place and was using at&t mobile internet card that was working fine. (before the reset the wifi was in tact and worked like cake) when I moved again I attempted to log on to my neighbors router (with permission and the number that is on the router as the web) now heres where the problem comes in...i can connect but with local access only no internet access...i thought maybe it was the wrong passkey at first but every other laptop in this house plus our xbox and even phones can connect but not my laptop I tried my phones hotspot aswell same thing showed up local access only limited connectivity...the signals are there and strong so I tried tethering my phone again shows connected but on the map it shows a green line between my pc and the router or hotspot... Read more

A:Local access only...cant access internet

when I moved again I attempted to log on to my neighbors router (with permission and the number that is on the router as the web) Click to expand...

we cannot provide support here - even with your neighbours permission - its actualy aganst the ISP terms of service - so unless they (the ISP ) are prepared to allow this , we cannot help here

please see our rules
http://www.techguy.org/rules.html

WiFi "Piggybacking" / "Wardriving" - We do not support the act of using someone else's Internet without permission. Also, please note that almost every ISP prohibits sharing your Internet connection with another home, and we will not assist you in breaking their rules.Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 43.6

i have been the internet (for a couple of months) with no problems, everything was working fine but a couple of weeks ago my 'access' started to change and say local only, stopping me from viewing certain websites, pictures would not load and would then take to to the 'cannot display webpage'. when i try to diagnose it, it either says that windows could not find a problem with the connection, 'the problem has been resolved' (though it doesn't say what the problem actually was, and it isn't resolved as a couple of minutes later it will do it again), or it gives me the option to reset the network adapter and then says it has been resolved again (it hasn't). im running windows vista. using wireless internet connection and it always says that my signal strength is excellent.

i have no idea what it could be as i had not been doing anything differently with it when the problem started, help please.

A:internet 'access' keeps changing from 'local and internet' to 'local only'

This happens when the router/dsl/cable modem loses its connection with the internet but your wireless connection between your computer and the wireless router stays up (local only).
The next time this happens run in and take a look at the WAN light on your dsl modem to verify that it is red or flashing orange (depending on your modem). Most likely the connection has dropped but the modem will restore the connection automatically when the line is good again. This is an ISP issue and you should call them when you are having trouble and ask them to diagnose the line. You will have to insist because it takes more than 2 microseconds of their time and you know how valuable they believe their time can be.

Read other 3 answers
RELEVANCY SCORE 42.4

Hello everybody, new to the site.
Here Is My problem, I took a win xp/media center off a domain few months ago. I have not used it since. I booted it up this morning in Admin, No Problem. I put it into a workgroup no problem. when i try to access any program, some local folders and/or control panel I get a message stating
"Windows can't access the specified device, path or folder. You may not have the appropriate permissions to access the item".
Now I can go into safe mode and there is no problem access anything. I can get on the internet ,right click on folders and so on, but once I relog on as admin -full control I can't get on the internet, launch programs, etc.

I really do not want to re-install.
thanks

A:Access To Local Pc

Hey there dirt, welcome to BC!

Try logging into safe mode and creating a new Administrator level account. Than reboot into normal mode and log into the new account. Do things work in the new account or are they the same?

Read other 4 answers
RELEVANCY SCORE 42.4

Hi,

I dont have any experience writing these so im not too sure how they go so sorry in advance for my mistakes!

I have 2 laptops both running vista home premium and both have been working perfectly until recently. I use 3 mobile broadband and this worked fine until i upgraded the hardware to a faster version. When i did this i could not connect to the internet on my 2nd laptop. I was getting the message "local access only". My other laptop still worked fine on the new dongle so I could live without my 2nd laptop on my home internet as i primarily use this one for college anyway. However, i then decided to get a mobile broadband router. When i connect this up i can detect the network on both laptops and connect to it but i am now getting the message "local access only" on both computers.

I have spent literally hours of my life on the phone running through every kind of test with my isp and still have gotten nowhere. They cannot identify the problem and are telling me that there actually isn't one and can't understand why its not working!

If anybody could shed any light on the situation it would be greatly appreciated because i'm literally at my wits end!

A:Local Access Only

coould you tell us about your netowrk setup. what kind of router, and wifi in the computers. how do you connect to the internet.

in search type cmd then ipconfig. using the built in snipping tool (type snipping in search)to take a screenshot of the results
Ken

Read other 16 answers
RELEVANCY SCORE 42.4

Hello, im using a Compaq Presario CQ60, and since ive moved into my moms house from my old house ive been having nothing but connection issues, About every 30 minutes or so it gets Disconnected, and i look at my connection access, and it goes from Internet and Local to just Local only, kinda getting irritated, we alsso have 2 other computers here that are running fine with the internet, but i cant get this too work, Please someone Help me.
 

A:Local access only?

Welcome to TSG:
Need some more info.Please answer as many of the questions as you can:
The “Johnwill” need to know about your environment questionnaire:

Please supply the following info, exact make and models of the equipment please.

What country are you located in.
Name of your ISP (Internet Service Provider).
What is the expected Upstream/Downstream speed for your ISP Connection?
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make and model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.

If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms? Have you disabled all encryption on the router to see if you can connect that way? Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?

If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Wi... Read more

Read other 1 answers
RELEVANCY SCORE 42.4

I'm running Vista on an Acer 4630Z laptop. My wireless connection changes frequently during the day from "Access: Local and Internet," to "Access: Local Only." It does not appear to have any affect on my wifi reception or my access to the internet, though sometimes it seems it may be a little bit slower in "local only." I can disconnect then reconnect and will quickly get Local and Internet again.
This happens several times a day.
What would be causing this? I've read other threads about people having Local Access only and not being able access the internet but that is not my problem. I can still access the internet even though it says "local only."
But I'd like to fix this so that it will stay on "Local and Internet."
Thanks!
 

A:Access: Local Only

Make and model of router ?
First things that are easy to do and do fix many router problems.
Download and install any current router firmware.
Do a router reset.Hold the reset button down for at least 15 seconds.
 

Read other 1 answers
RELEVANCY SCORE 42.4

Here is my problem:

One morning, I woke up to check online on my PC, what I always do in the morning.
My internet wasn't working. I went to check my router and everything worked fine.
Other computers could still connect to the same internet connection (wirelessly).
So there was nothing wrong with the internet connection.
So I tried to connect to the internet on my PC using another SSID (someone else's and not password protected).
I logged on right away without any problem. That was weird.
I went back to my own SSID, it got connected but said, "Access: Local Only".
I use my own SSID on my netbook, and everything works fine.
So why isn't it working on my PC. It had always worked before and I didn't change any settings.
So, on my PC (I am using Vista on my PC, XP on my netbook), it said "Access: Local Only".
I could still print wirelessly via this connection, but I can't browse the internet.
I don't know how to enable Local + Internet option...
I tried many things that other people suggested:
- restart computer
- uncheck IPv6
- add some files to registry
- enable firewall
- disable and enable connection
nothing worked

I don't think there is something wrong with my internet, b/c I could log on via other computer.
I don't think my wireless adapter on my PC is broken, since I could still log on to internet using another SSID.
I am guessing the wireless setting for my SSID on my PC is stopping my PC from accessing the in... Read more

A:Access: Local Only

Read other 6 answers
RELEVANCY SCORE 42.4

my modem and router seem to be working fine, as i have another laptop in the house connected without a problem. however, our main laptop wont connect by cable from the router or by wireless. it says its connected but to local access only. please help if you can. thanks
 

A:local access only

moving to networking forum
would you do the following and post back the results
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need to paste the results into something like notepa... Read more

Read other 3 answers
RELEVANCY SCORE 42.4

Ok, this is my last resort after spending hours digging through forums finding nothing that works for my situation. Out of nowhere, my internet connection has been cut off. I am connected to my university's network via Ethernet cable, IPv4 says "Local", IPv6 says "Limited", a ping to 4.2.2.2 returns "request timed out" which means I am not connecting to the DNS server. All my setting are the same as a friends computer, connected the exact same way. Drivers are updated, tried uninstalling the network controller and reinstalling it, nothing works. I have tried every command line I have come across, disabled IPv6 through a registry edit, and yet it still refuses to connect. Please, if someone can help me before I throw my custom built baby out my third floor window, I would be VERY grateful. If you need more info, let me know. Here's what returns after ipconfig /all, since that is usually the first thing people ask for:






C:\USERS\JOEY>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Joey-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet #
2
Physical Address. . . . . . . . . : 00-1D-7D-D7-5A-56
DHCP Enabled. . .... Read more

A:Local access only, please help!

---this may be an uneducated guess from me, but your list says:
---[Lease Obtained. . . . . . . . . . : Friday, May 29, 2009 9:23:46 PM]
---[Lease Expires . . . . . . . . . . : Saturday, May 30, 2009 9:23:45 PM]
---(that makes it 24hrs. to me)---everything else looks okay---anyone else?---

peace

Read other 35 answers
RELEVANCY SCORE 42.4

I've been searching the internet for about 2 days already and I've found a bunch of topics on this and tried the solutions but none seemed to work!

I recently had a rogue on my Vista and now the internet won't work. It says I'm connected, but locally only. When I go to the Network center in the Control Panel it says I'm connected to the router when an excellent signal strength but my router isn't connected to the internet. I know it's not a firmware or the router now being compatible with Vista because this laptop I'm typing it on is a Vista and it connects fine with the router. I've tried resetting the router and that didn't work. I've wired and wireless and both come up with the same local access only. I've tried the whole command "netsh" and winsock reset things. I've tried disabling the IPv6 and that didn't work. Nothing seems to be working.

I have two computers that have this problem (an XP desktop and a Vista laptop) and it would AWESOME to have it fixed.

** I don't have the format disks for the computers. When I bought the computers it didn't come with one and now the store I bought them from is out of business (nationally) and I'm not sure where to get one.

** I read something about locating the DHCP thing and about how there are rogue servers and stuff. I didn't totally understand it, but I had a rogue on both computers right before it stopped connecting to the internet so I'm wondering about that. If someone could educate me about this that could be... Read more

Read other answers
RELEVANCY SCORE 42.4

okay, I'll try that...
 

A:Access: Local only?

yeaah it didn't do anything :\ i wonder if there's a way to make my computer only pick up wireless....
 

Read other 2 answers
RELEVANCY SCORE 42.4

Alright so i've got a question guys, basically i have a work laptop with is running Vista 32bit and the problem i'm having is it will connect to wireless networks fine and work on the internet fine.

But when i disable that and try to connect through my ethernet connector it wont assign an ip address by dhcp. Ive checked all the setting to make sure it's supposed to assign by DHCP and i've tried it at home and at my work, so i know it's not the router that i'm connected to, and i assume it must be something with configuration but i can't seem to figure it out.

Any help or comments are much appreciated...thanks!

A:Local Access Only

Do u have a DHCP server runing on ur network at home or at work?
Is the network at home or at work configured for DHCP??
what are the symptoms when u connect through ethernet??

Read other 6 answers
RELEVANCY SCORE 42.4

I have a little network going at my house and i've encountered a problem,
here is my network,

Cable modem ----- D-Link 1005D Network Switch ----- DIR-655 and DIR-825
----- Two Laptops and Two Desktops

I got the DIR-655 a while ago and it worked perfectly, I decided to get the
DIR-825 for the 5Ghz band to stream HD/Regular video and play online, I set the routers so they had 2 different default IP's (192.168.0.1 and 192.168.0.2)
and made sure the IP's of the computers on each router didn't conflict, the DIR-655 still works perfectly (Local and Internet), but the DIR-825 only has local access, both have the DHCP server on but no IP's conflict. I made sure either than that all the settings were the same. Can anyone help?
 

A:DIR-825 Local only access...

Read other 6 answers
RELEVANCY SCORE 42.4

Hello all,

i have been battling this issue for the past 2 days, thus far i am not winning ...

out of the blue my wired network went to local access only. wireless devices work fine, plugging ethernet into another machine works fine as well. i have attempted multiple suggested fixes with no positive results. some details about the problem:

when testing with ipconfig i get assigned a default IP (162.xxx) and no default gateway

i can ping local (127.xxx) but not router or beyond

tried:
windows troubleshooting
safe mode with connectivity
reinstalling drivers
resetting NIC
updating all drivers
system restore
flashing BIOS

nothing works and i am getting quite desperate since i kinda like this machine. i am totally lost, please help !

A:Local access only ... need some serious help

hello mt103, and welcome to Vista Forums.

Try this tutorial out and see if it helps at all: Internet Troubleshooting Guide - Windows 7 Forums - created by Dinesh

Failing all of that, try downloading the most recent driver for wireless lan from your computer's manufacturer's website, uninstall your current one, and install the new one.

Let me know how it goes.

Read other 13 answers
RELEVANCY SCORE 42.4

Can connect to internet but local acess only . Other laptop works fine
 

Read other answers
RELEVANCY SCORE 42.4

just did a hd format and reinstall of windows vista (hp laptop pavillion DV6000).
Can not get internet connection (cable or WiFi) past "local only"

Read other answers
RELEVANCY SCORE 42.4

All right. This has been happening as long as I had my computer. It's new. And it has Vista on it. When ever I turn on my computer, and everything. I get problems when trying to get onto the network. Like.. It will be "Identifying" The network for awhile. And i'll wait. And then I'll connect to it and it will say "Access: Local only" And I wont have Internet. And then i'll renew my IP and restart my Adapter and then restart my computer and then restart my Modem And then after doing all this over and over again, I might get internet. And some days i'll true on my computer and then I'll have internet and everything will work.

So let me say this. I'm on a wireless network. (NetGear) There are other people that are on it too and don't have this problem. Also I have the new-est NetGear Router And the new-est NetGear Adapter And they should work together. Also, my Security is on the highest level, WPA-SAK2. (I think thats what it called.)

Thanks.
 

A:Access: Local only

Read other 7 answers
RELEVANCY SCORE 42.4

Hi! I use 2 computers to access the Internet through the same wireless DSL connection. On one computer, I only get local access but no connection to the Internet. However, I can access the Internet if I use another network connection that is within this computers range, so I guess there is nothing wrong with my computer. Also, I can access the Internet with my other computer through the same DSL modem that just gives local access with the first computer, so I guess there is nothing wrong with the modem either. I tried the diagnose and repair option of my wireless card, but it didn't find anything. What could the problem be and how can I fix it??
 

A:Local access only

What's the brand and model of your modem? What is the brand and model of your router if you are using one?

Please show for each PC ...

Start, Run, CMD, OK to open a command prompt:
(For Vista type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 2 answers
RELEVANCY SCORE 42.4

Okay, I give up! I've seen several similar posts to my issue and I've tried just about everything suggested to no avail.

I have Vista Home Premium (32-bit). I've had the same laptop/modem/DSL for over a year and everything worked fine, then about a week ago I started getting the local-access-only message and can no longer connect to the internet.

What I've tried:
1) Taking my laptop to another wireless location - same error.
2) Trying an XP laptop on my home wireless - works just fine.
3) Rebooting in Safe Mode - still doesn't work.
4) Deleting the Network adapter drivers and letting windows reinstall - still doesn't work.
5) Going back to the latest windows update and uninstalling it - still doesn't work.
6) Disabling TCP/IPv6

Any other suggestions? I'm out of ideas and quickly losing my patience!

A:Local Access Only

Have you tried the diagnose and repair option in network and sharing center and resetting your router/network adapter?

Read other 8 answers