Over 1 million tech questions and answers.

BSOD - Driver Power State Failure when laptop shuts down

Q: BSOD - Driver Power State Failure when laptop shuts down

This error has been happening for 80% of the time when my laptop is shutting down or restarting. It started few days ago when I removed everything and reinstalled windows. I then refreshed my laptop couple of times but the problem is still persisted. I updated windows and all devices are up to date. Restarts are also slow when it does restart properly.

When I tried updating to windows 8.1, it would stop at "setting up 82%" and had to hold the power button to turn off the laptop couple times.

Dump file: https://www.dropbox.com/s/jdivgtmu3a...37-01.dmp?dl=0

ASUS laptop
Disk Drives: TOSHIBA MQ01ABD100
DVD/CD-ROM drives: HL-DT-ST DVDRAM GU71N
i7 3537U
8 GB DDR3
Nvidia Geforce 740M

RELEVANCY SCORE 200
Preferred Solution: BSOD - Driver Power State Failure when laptop shuts down

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD - Driver Power State Failure when laptop shuts down

Please read BSOD Posting Instructions

Read other 2 answers
RELEVANCY SCORE 111.2

From day one when I opened up this laptop it was crashing. I've had the RAM replaced, the SSD (twice), factory reset, MOBO replaced, and still the same intermittent crashing. The company I bought this from "tried" to fix it but couldn't ever get anywhere. This has been a 2 year P.I.T.A. for me and I'm finally coming to you guys because the company I bought this from has informed me that my warranty is up and I will have to start paying for their "help". I thought that was comical. Nonetheless. Here I am. I need help. Not sure where to start because I've never been able to pinpoint the cause. Most of the time the BSOD reads "Driver State Power Failure". I've personally updated all of my drivers, chipset, BIOS, graphics card, etc. The vendor has also done the same. To no avail.

Let me know what I can do to help someone diagnose this for me.


Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-4720HQ CPU @ 2.60GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 16273 Mb
Graphics Card: NVIDIA GeForce GTX 960M, -2048 Mb
Hard Drives: C: 110 GB (31 GB Free); D: 1863 GB (1381 GB Free);
Motherboard: ASUSTeK COMPUTER INC., G551JW
Antivirus: Windows Defender, Enabled and Updated
 

A:New Laptop - BSOD - Driver Power State Failure

It sounds like you have an ASUS ROG G551JW laptop which originally came with Windows 10 Home 64-bit.
You say you bought it new and had problems with it the very first day of use, so I'm surprised you didn't return it for another one instead of having hardware replaced in it for the past 2 years.

There are several links here that you can read about "driver power state failure" in Windows 10.
https://www.google.com/?gws_rd=ssl#q=driver+power+state+failure+windows+10&spf=1498270496270

----------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 111.2

Hello,
I am new. I cannot access my minidump folder because I do not have access and cannot find out how to get access, otherwise I'd post it up.

I am trying to download new chipset drivers from gateway and I am sitting at 0% the download will not start.

The laptop is new roughly 3 months old. I am running Vista 64 on a Gateway P-7800. I've BSoD'd probably 15 times in the last week or so. Please help. Thanks.

A:New Laptop BSoD Power State Driver Failure

Follow the instructions here: http://www.techsupportforum.com/1871981-post2.html

It will provide us with the minidumps and more information about your system.

Read other 11 answers
RELEVANCY SCORE 110

Dear forummers,

Recently, I've been heving some BSOD'S wen putting my GE70-i550M287FD to sleep mode or hibernation. The NB just stays just active with a black screen for a while, only to end up in a BSOD eventually.
It gives me always the same BSOD, so I figured it would be caused by a single error. However, I haven't been able to detect and fix it up until now. I hoped that some of you might have dealt with it before or know how to deal with it.

The only hardware I've got plugged is the mouse. I have't been able to test if I got the same error without the mouse plugged. Also, this BSOD ONLY occures when going into hibernation/sleep mode.

This is a photo from the BSOD I keep getting once a week/2 weeks or so.

IMG_20140212_213442_zpse94cdbb9.jpg Photo by esmorax | Photobucket

I have read something about minidump files. How do I open them and do they contain any necessary information needed to fix this error?

Thank you in advance!

esmorax

A:MSI GE70 Driver-Power-State-Failure BSOD help :( (Laptop)

Hello Esmorax, and welcome to Seven Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by later when able to further help.

Read other 8 answers
RELEVANCY SCORE 108.8

Hi,

I'm getting frequent random BSOD Power_Driver_State_Failure on my ASUS G551JM Laptop (https://asus.com/support/Download/3/...RbVetG02i5/41/) It happens while plugged in and running off battery but more frequently on battery power. It usually happens within 30 minutes of powering on the laptop or waking it up from sleep/hibernate. It primarily happens after logging into windows but on rare occasion will blue screen prior.

I've updated drivers from Asus and chipset manufacturers websites: intel rapid storage driver, Intel MEI driver, Intel INF driver, Intel wifi and bluetooth drivers, clean installed nvidia gtx 860m drivers. I tried to update intel HD graphics drivers but got this error message:
Computer Manufacturer Graphics Driver Detected. Your computer manufacturer customizes the drivers that run Intel components on your machine. You might lose functions and cause other technical issues by installing the Intel drivers.
Windows updates are up-to-date and no virus or malware.

Please help,
Thank You.

DM Log collector Tool LOST-Wed_08_03_2016_190523_80.zip

A:ASUS Laptop Constant BSOD Power Driver State Failure

Hi rapidvodka,

I would recommend to install the Nvidia drivers from ASUS

Code:
2: kd> !irp
Irp is active with 0 stacks 0 is current (= 0xffffe001e81748c0)
Mdl=ffffd0006f0853c8: No System Buffer: Thread ffffd0006f085458: Irp stack trace.
cmd flg cl Device File Completion-Context
2: kd> !irp ffffe001`ed49d010
Irp is active with 6 stacks 4 is current (= 0xffffe001ed49d1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001e9fb3540 00000000 fffff80103cfe590-ffffd0006a7eb8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001ed481040 00000000 fffff80352fa875c-ffffe001ef323f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for n... Read more

Read other 3 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98.4

So about a month and a half ago I bought myself a new MSI Laptop, and in the past 3 weeks I've had 5 Driver Power State Failure (DPSF) BSOD's. I've searched around but I'm not confident enough when it comes to BSOD's to actually do anything without first getting some advice for my particular problem.All I have really been able to tell from this is that the error always occurs at the same location, ntoskrnl.exe (+7cc40), which, being a critical part of the OS, I assume is a very bad thing. Anyways, here are the minidump files:==================================================
Dump File : 090111-18798-01.dmp
Crash Time : 01/09/2011 2:40:06 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`07a29a10
Parameter 3 : fffff800`049423d8
Parameter 4 : fffffa80`0aa02970
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7cc40
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.17640 (win7sp1_gdr.110622-1506)
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\windows\Minidump\090111-18798-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File... Read more

A:Driver Power State Failure - New MSI Laptop

I would try...downloading (from MSI website)...chipset and wireless drivers for your system...then removing the current drivers via Device Manager, followed by installation of the new ones.

Or...if you have drivers CD with your system, you can use that, rather than downloading drivers from MSI website.

Louis

Read other 3 answers
RELEVANCY SCORE 98.4

Hey guys!
I am hoping someone can help me.. I am going to upload the mini dump files that have been saved. I just got this new laptop today and have since had about 10 blue screens of death. I have not installed anything on this new computer besides Firefox. I am hoping that somebody can help me! thank you.

A:driver power state failure first day of use new laptop

Hi.

Please update this card reader driver to alleviate your issues:

Code:
o2sdx64 o2sdx64.sys Wed May 06 21:56:18 2009
Also good to do:

I also noticed many older drivers. Please visit ATI's website to get the latest video card driver.

Read other 4 answers
RELEVANCY SCORE 98

Hello,
I have been getting a Driver power state failure bsod for about a week now. Some days it doesn't seem to occur that much while other its several times an hour. From googling it seems like the issue is either an out of date driver or my ram. I"ve run "whocrashed" and "bluescreenview" which point to

This was probably caused by the following module: ntoskrnl.exe (nt+0x14F9A0)
Bugcheck code: 0x9F (0x3, 0xFFFFE00101519060, 0xFFFFD0018AB69960, 0xFFFFE00106234C10)

but I guess this isn't the actual driver (or ram) causing the issue. Any help would be appreciated.

Thanks,

A:Driver power state failure BSOD

Hi jag213,

Welcome to the 8forums.

Please do the following:
Open an admin command prompt
Copy/paste "sfc/scannow" (without quotes) and press enter
When it finished reboot your system
Open again an admin command prompt
Enter sfc/scannow again
If sfc/scannow doesn't say "Windows Resource Protection did not find any integrity violation", please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.

Please fill in your system specsPlease go to this site and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

Read other 10 answers
RELEVANCY SCORE 98

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 98

I have windows 8 installed on my home computer. The computer keeps shutting down on it's own and saying "Driver Power State Failure". Can someone look at my BSOD Minidumpfiles and give me an idea of what could be causing this problem. I have tried to save the minidump files into a zip file, but it brings up an error not allowing me to do this. Hopefully the text file from Blue Screen view is enough to figure this out. Thanks. 
==================================================
Dump File : 021413-31262-01.dmp
Crash Time : 2/14/2013 11:00:19 AM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`1c00e600
Parameter 3 : fffff800`49f58920
Parameter 4 : fffffa80`1b38fa00
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+3474
File Description : 
Product Name : 
Company : 
File Version : 
Processor : x64
Crash Address : ntoskrnl.exe+7a040
Stack Address 1 : 
Stack Address 2 : 
Stack Address 3 : 
Computer Name : 
Full Path : C:\Windows\Minidump\021413-31262-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 905,408
Dump File : 021313-22042-01.dmp
Crash Time : 2/13/2013 8:27:48 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00... Read more

A:BSOD - Driver Power State Failure

Hello cap2587,  I'm afraid that BlueScreenView is not very helpful.  If we could gather a little more information about the problem computer, it might prove beneficial in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.Below is ONLY for those who can not get online when running Speccy: Select File --> Save as Text File and save the file to your Desktop.Please copy the text file into your next post.Important Note: You will need to edit the text file to make sure that your Windows Key is not present under Operating System.3. )... Read more

Read other 10 answers
RELEVANCY SCORE 98

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 98

As the title says, I'm experiencing a Driver Power State Failure BSOD, I'll include informations gathered by the BSOD File Collection Script and Speccy below. I suspect my HDD might be the culprit but I'm not sure.
 
https://dl.dropboxusercontent.com/u/18557414/bsod/BSOD.zip

Edit: Mirror: http://www.mediafire.com/download/el91ery9g4t51na/BSOD.zip
Summary
Operating System
Windows 8 64-bit
CPU
Intel Core i7 3517U @ 1.90GHz 50 °C
Ivy Bridge 22nm Technology
RAM
4,00GB Single-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. K56CM (SOCKET 0) 49 °C
Graphics
Generic PnP Monitor ([email protected])
Intel HD Graphics 4000 (ASUStek Computer Inc)
2048MB NVIDIA GeForce GT 635M (ASUStek Computer Inc) 44 °C
Hard Drives
466GB Hitachi HTS545050A7E380 (SATA) 35 °C
Optical Drives
HUAWEI Mass Storage USB Device
DTSOFT Virtual CdRom Device
MATbleepADVD-RAM
Audio
Realtek High Definition Audio
Operating System
Windows 8 64-bit
Computer type: Notebook
Installation Date: 17.11.2012 00:12:00
Serial Number: *****-*****-*****-*****-*****
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Antivirus
AVG AntiVirus Free Edition 2013
Antivirus Enabled
... Read more

A:Driver Power State Failure BSOD

to the Bleeping Computer forum.
 
 
Your issue seems to be probably caused by outdated storage controller driver.

BugCheck 9F, {3, fffffa800470c060, fffff88002f017f0, fffffa80046e8870}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys
Please try the below steps.
 
Update Chipset driver.
 
1. If there is Intel Rapid Storage Technology driver installed in your system, please uninstall it completely first.
 
2. Download and install latest chipset driver from the below link.
 
    https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/20775/eng/infinst_autol.exe&lang=eng&Dwnldid=20775
 
Change power power plan to high performance.
 
Please read the excellent guide from below link and make sure power plan is set to "High performance". 
 
http://www.eightforums.com/tutorials/5464-power-plan-settings-change-windows-8-a.html
 
This will prevent core system components to enter in to power saving mode. Extreme power saving options are meant for portable computers and absolutely not necessary in a desktop machine.

Read other 5 answers
RELEVANCY SCORE 98

Hey, I have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on, Any help would be greatly appreciated.

dump files in attachment


(Great my dump files are 9.37mb what can i do?)

A:BSOD - Driver state power failure

Not a clue what to do now, just found out my dump files are 9.37 MB which is over the limit you can put on here, any suggestions?

Read other 2 answers
RELEVANCY SCORE 98

Hi,
I'm using a Asus UX32ln.
I've been having getting this BSOD for a while. However, I noticed that it only occurs some time (maybe 15-30mins) after i run an application using the dedicated GPU (Nvidia Geforce 840m). If only the integrated graphic card is used, it runs fine.
Thanks.

A:driver power state failure BSOD

Hi weishou,

Welcome to the 8forums.
Unfortunately your attached zip file is empty.
Please try to upload the zip file again.
Please check the minidump folder for dump files: {windows partition}\Windows\Minidump.

Read other 13 answers
RELEVANCY SCORE 98

Any help is appreciated. This BSOD error has happened 3 or 4 times over the past couple months.
Each time after a hard shut down and reboot it seems to work normal.
Today when before it happened Chrome internet was very slow/lagging but that might have been wifi related not sure.

thanks

Read other answers
RELEVANCY SCORE 98

Hi All

Being the non-technical, geekless person I am, I would certainly very much appreciate your assistance in ascertaining why I have just experienced a BSOD during Shutdown which took over half-an-hour.

My Windows 7 Ultimate x64 was working perfectly up until now and I am at a total loss as to why this has occurred.

I have attached a Crash Report courtesy of NirSoft's BlueScreenView software program.

Thank you in advance for your assistance with this matter.

Warmest Regards

Neil (Mr Smiley)

A:BSOD-Driver Power State Failure-Please Help

According to what you attached in the screenshot, it appears that one of your services failed to stop or shut down, causing the system to go in to a infinite loop that tried to kill that process.

It is just a one time event or does it happen often?

Read other 5 answers
RELEVANCY SCORE 98

Hello,

So recently, I got driver power state failure BSOD and I decided to refresh my laptop. I already updated my windows 8 but the problem still persist. I also noticed that some update fail to install when I restart my laptop. After that, everytime I turn on my laptop, my laptop freeze about 3 minute and then work normally. But if I shut down my laptop, it started to restart, but then after that I can shut down normally.

My .dmp file is attached below. Thank you for your help!

A:BSOD driver power state failure

Hi ardikur,

Welcome to the 8forums.

I see you have KMSpico, for what have you used KMSpico?

Read other 3 answers
RELEVANCY SCORE 98

Hello TechSupportForum guys ,

i hope you can help me resolve following issues:

1. ISSUE - DVD ROM DRIVE

My DVD/CD ROM (MATSHITA UJ8C2) powers off on its own each time i start the laptop. I changed options in power management but the problem still persists. Also I am only able to eject dvd-drive, when pressing on eject button on the side of laptop. Ejecting in My Computer doesnt work - DVD RW Drive (powered off) is displayed with single line crossed red circle icon.

Device Manager message today:

Two different messages for DVD ROM Drive appeared after I booted the laptop.

Trasparent icon in device manager:
Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

Icon with yellow triangle
Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38)

The driver could not be loaded because a previous version of the driver is still in memory.

2.ISSUE - Continueous Dropping of Shared internet connection

For the last couple of days, when I share the internet connection via wifi using cmd line netsh wlan start hostednetwork, the other devices - laptop thinkpad w520 and mobile phones - lose connection after few minutes. I must then turn off/on wifi adapter and restart the batch file with netsh wlan start hostednetwork. However, sometimes the wifi adapter doesnt turn on, so I'm forced to reboot... Read more

A:BSOD - Driver Power State Failure

Update to ISSUE 1 - I tried several times uninstalling driver from device manager and let windows install it back again on reboot, but the problem persists. Today the DVD drive totally disappeared from My computer and in device manager the driver is with yellow triangle...

Read other 1 answers
RELEVANCY SCORE 98

I've done a search. This thread is similar but not exact to my issue. One addition to the information submitted in my system info is I have a 64bit system.

I uploaded the .zip as per http://www.sevenforums.com/crashes-d...tructions.html

Should I provide anything else?

Thanks!

A:BSOD Driver Power State Failure

Welcome to SevenForums.

Uninstall Spybot and Kaspersky during troubleshooting. (You may install it back if we know they weren't a part of your issue.)Removal tool for Kaspersky Lab products
How to uninstall | Spybot ?





Quote:
MSE is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software:-1. Microsoft Security Essentials - Free Antivirus for Windows
2. Malwarebytes - Free
3. Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


Then update this driver:

Code:
kd> !irp fffffa80104b1570
Irp is active with 4 stacks 3 is current (= 0xfffffa80104b16d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa8009d3d050 00000000 fffff80003720200-fffffa800d4d63c0 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64... Read more

Read other 5 answers
RELEVANCY SCORE 98

Intermittently I get this blue screen. The latest crash occurred as I was typing so i don't think it has anything to do with sleep mode as someone suggested.

I have not installed anything lately other than adobe photoshop and lightroom updates.

Any help would be appreciated.

A:BSOD Driver State Power Failure

Welcome aboard

It is caused by the display driver.

Code:
!irp fffffa80172e7670
Irp is active with 4 stacks 3 is current (= 0xfffffa80172e77d0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800c85aa10 00000000 fffff8800f4db9dc-fffffa8011998b20
\Driver\pci nvlddmkm
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800ef81480 00000000 00000000-00000000 pending
\Driver\nvlddmkm
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800ba7a8e0

Args: 00000000 00000000 00000000 00000000
And it is very old ....

Code:
lmvm nvlddmkm
start end module name
fffff880`0f425000 fffff880`100a1000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Wed Sep 28 13:41:13 2011 (4E82D6A1)
CheckSum: 00C67C7A
ImageSize: 00C7C000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Apply the latest version of nVidia display driver.
You may download it directly, from our forum link Latest NVIDIA ForceWare Video Drivers Windows 7; or you... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hello,

I am new to this forum, which I found online while searching for a fix to a BSOD I'm repeatedly having. I am hoping someone could help me out because it is getting extremely frustrating. The PC is used as a dedicated media center. So having the system go down multiple times during a movie is not fun at all.

I first noticed a problem with Win 7 about 10 or so days ago. The OS seemed to be slower than normal when logging on, but no issues other than that. Shortly thereafter when I would switch my TV input to my PC I was continually getting the login screen. I did a little research and it was suggested to change the Windows option to not restart on failure, which I did.

After making that change I noticed a repeated BSOD, with a Driver_Power_State_Failure message. The time varies on how long it will take before I get the crash, but it happens with certainty right now. Windows is also extremely slow logging in, and completely crashes after initial login frequently as well.

The only change that I can pinpoint is that I used a SATA to USB HDD converter to backup a hard drive. Well, attempted to backup. I cannot complete this due to system crashes. Also, I was having repeated system crashes with a portable HDD plugged in, and after unplugging it the system started on the next boot. This could be a coincidence, but I have not troubleshooted that further.

System Specs

? OS - Windows 7 ? x86 64bit ? What was original installed OS on system? - Win 7 Pro ? Is th... Read more

A:BSOD - Driver Power State Failure

I currently have Driver Verifier running, and installed Speccy. Link to output - http://speccy.piriform.com/results/e...uBcUrMpiUSPB2G

Read other 4 answers
RELEVANCY SCORE 98

Hi,
recently my laptop (Acer 5655G-9471) started showing me BSODs while Shutting down. After about 10-15 minutes of showing me "Shutting down...", it fails and shows me DRIVER_POWER_STATE_FAILURE. Not sure what the error code was but I'll write that down when it happens the next time. Attached is a SF Diagnostic dump.

A:BSOD driver power state failure

Code:
BugCheck 1000009F, {4, 258, fffffa8004de5b60, fffff80000b9c3d0}

*** WARNING: Unable to verify timestamp for GEARAspiWDM.sys
*** ERROR: Module load completed but symbols could not be loaded for GEARAspiWDM.sys
Implicit thread is now fffffa80`04de5b60
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : GEARAspiWDM.sys ( GEARAspiWDM+721b )

Code:
Usual causes: Device driver
GEAR ASPI Filter Drive Kernel:


Code:
5/18/2009 1:17:04 PM
gearaspiwdm.sys - Information

This driver seems to be causing some issues with your system, from what I have found, it is usually linked with iTunes or a CD/DVD burning program.

Could please upload the .NFO separately since for some reason it is being reported as corrupted:

Start > Type: msinfo32 > File, SaveScreenshots and Files - Upload and Post in Seven Forums

Read other 5 answers
RELEVANCY SCORE 98

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 98

I really have no idea what is causing this BSOD. It seems to happen randomly and it has happened 3 times within the last week.

OS - Windows 7
x64
Originally installed Windows XP
full retail version
Age of system - about 3 years
Age of OS - 4 months
CPU - Intel Core 2 Duo E7200 2.53GHz
GPU - Nvidia GeForce 9600GT
Motherboard - ASUS Striker II Formula
Power Supply - 500W came with case (Raidmax Smilodon)

A:Driver Power State Failure BSOD

And the necessary files

Read other 7 answers
RELEVANCY SCORE 98

I've been coming across this bsod for a few weeks now, it only happens when i put the computer into sleep/hibernate. It even happens sometimes when the computer tries to start from a cold boot. The only hardware change i've made to the computer was a new wireless adapter from netgear model no.: WNA3100. I made sure to download the latest driver to support windows 8 but the bsod still occurs.

Heres a link to my minidump file if anyone can analyze it and tell me which driver is causing the problem it would be much appreciated.

https://skydrive.live.com/?cid=284E7...02A97481AA!105

Thanks

Read other answers
RELEVANCY SCORE 98

I use a Lenovo laptop w/ Windows 7, and occasionally get a BSOD. Attached is the minidump file. Which driver is causing the problem? Any help would be greatly appreciated.

Thanks,

David S :-)

A:DRIVER POWER STATE FAILURE BSOD

Hi dshaw02 and Welcome to TSF,

Please follow the posting instructions found here, ZIP all the files down and attach them to your next post.

After looking through this specific BSOD a bit there are a few thing i'd like you to either inactivate or update as they're old drivers:

STREAM.SYS Tue Jul 14 01:06 : 18 2009 (4A5BCBFA)

Belongs to: Pinnacle Instant DVD recorder

AND

atikmdag.sys Mon Feb 28 16:46:24 2011 (4D6BD160)

There is a newer driver found at ATI's webpage. Uninstall this driver, reboot the machine, install the new ones.

I can't really tell more from this BSOD you've attached, i'll need all the information from the BSOD instructions. All for now is that ONE driver is calling the System Kernel, and sending an invalid command for the operating system, and then crashes.

Read other 1 answers
RELEVANCY SCORE 98

Hello everyone,

My PC was running flawlessly until I woke it from sleep one day to find out that the USB keyboard and mouse and all other USB ports are not working. I figured ok I'll just restart. Well the restart hung at "Shutting Down..." for 5 minutes+ before I got a BSOD and the system eventually rebooted.

This happened a couple of times so I thought I should update all USB drivers and I did download the latest Intel drivers and installed them. This fixed the USB ports freeze after sleep wakeup, but if I use the PC after that for 5-10 minutes, I'll get a BSOD again which you'll see in the attached zip file.

In device manager, I was seeing an error with a driver called wirelesskeyboardfilter_01, but i researched that and found it had to do with HP drivers and I don't have any. I even followed a Microsoft article to fix wirelesskeyboardfilter_01 but the problem persisted.

I would like to know which driver is causing the BSOD so that I update it/fix it.

I did a memory test and it came back with no errors and in advanced power plan settings, USB selective suspend setting is Disabled.

I would really appreciate your help and I thank you in advance.

Read other answers
RELEVANCY SCORE 98

I started getting a BSOD almost every night after installing a new video card. It's an AMD APU that I was running with on-board graphics, and I just put in a GeForce 8800GT. I can't figure out what driver is causing it, as far as I know I'm running the latest and most appropriate driver for the card. Attaching the minidump files.

Thanks

Attachment 247194

A:BSOD Driver Power State Failure

Hi shhaggy,

The mini-dump exhibits 'ntsokrnl.exe' error that may indicate software issues. As per my experience, a fresh 'Windows reinstall' has been most useful. However, you may also try the following steps:

1. Reinstall 'Video Card' drivers
Click 'Start' and type 'devmgmt.msc' (without quotations) in 'Search programs & files' > Tap 'Enter' > Expand 'Display Adapters > Right click & uninstall 'GeForce 8800GT' (Confirm software install if prompted) > Follow through with the uninstall and restart the system > Click Drivers | GeForce to run 'Auto-detect GPU Utility' > Download and install the suggested driver > Restart system and check results

2. If the issue persists, run 'System File Checker tool' to see if that works: Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

3. If you still experience issues, try 'Factory Reset' (If a healthy recovery image is available)
If a healthy 'Recovery Image' is available (on the hard drive or on an external media), you may restore the system back to known-good settings. This step may not always work; you may give it a shot before doing a 'fresh Windows Reinstall'.

Note: 'Factory Image Restore/Operating System Reinstall' will lead to data-loss; please backup the data on an external media before attempting the restore options.

Read other 1 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 98

Please assist with a frequent and annoying BSOD, which gives the error stating: "Driver Power State Failure".

Files attached and information below.


? OS - Windows 7 SP1 (32-bit)
? What was the original installed OS on sthe ystem? Win7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Pre-loaded on laptop
? Approximate age of system (hardware) - 2 years
? Approximate age of OS installation (if you know) - 6 months
? Have you re-installed the OS? Yes after hard drive crashed and then replaced with SSD

? CPU - I5 3320M
? Video Card - Intel 4000

? System Manufacturer - Lenovo T530
Laptop

I have also run a Driver Verifier, but don't know where to find what. I did this before the Sysnative APP and the Perfmon reports.

The help is much much appreciated.
Tnx
Doug

A:BSOD - Driver Power State Failure

Hi. . .

You need to update your H5321 gw Mobile Broadband Driver.

The only known source is Lenovo Support - http://support.lenovo.com/us/en

If you can't find a driver update, go into Device Manager and disable the device since you are using your Intel 82579LM Gigabit Network Connection Ethernet for Internet.

Regards. . .

jcgriff2

`


Code:

Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert\AppData\Local\Temp\Temp1_SysnativeFileCollectionApp.zip\SysnativeFileCollectionApp\060115-10795-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`831769d4?

************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.x86fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0x8304e000 PsLoadedModuleList = 0x831985b0
Debug session time: Mon Jun 1 04:14:29.677 2015 (UTC - 4:00)
System Uptime: 1 days 1:34:53.050
Loading Kernel Symbo... Read more

Read other 3 answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hey there again guys! Recently my computer has been giving me a handful of BSoDs lately, claiming to have shut down because of a "driver power state failure". I've done my Google homework on this problem, but none of the forums I've checked were specific to the issues I've been having with my system. They include: updating drivers, deleting certain things and etc, but they all have different stuff on their computer than I have. It's happened to me five times since it started, last week or so. I'd love you forever if you could figure out for me why I keep getting my BSoDs!

I've attached the .dmp file and thank you guys! <3
 

A:BSoD -- driver power state failure

When does the BSOD occur?
I'd start by taking out any add-on peripherals inside your PC. Leave only the required components required to get into Windows connected - motherboard, ram, cpu, graphics card (if neccesary), and hard drive.
If it continues with this setup, i think it may be graphics drivers.
 

Read other 1 answers
RELEVANCY SCORE 98

i am having an issue with bsod's it says driver power state failure and crashes
i tried to upload the minidump files but it says i dont have permission to access these files but i am logged in as the administrator please help
 

A:BSOD driver power state failure

What OS are you running?
 

Read other 1 answers
RELEVANCY SCORE 98

My computer crashes randomly. Giving me the blue screen error, Driver Power State Failure. Not sure how to resolve this issue.
Assistance required ASAP.
I'm working on a senior project and my computer crashing is eating up valuable time.

A:BSOD Driver Power State Failure

Hello win7ndhlp.

You are facing some extensive network related crashes. And this is behind them all.

Code:
fffff880`031d72f8 fffff880`02ecf96eUnable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0x196e
Description here: Driver Reference Table - SymIMv.sys

I dont believe that the best policy of network security is network blocking.

Uninstall Norton and all Symentec products using Norton Removal tool.
AND OMG

Code:
Start Menu\Programs\AVG 2011
Start Menu\Programs\AVG PC Tuneup 2011
Start Menu\Programs\AVG PC Tuneup 2011\Utilities
Start Menu\Programs\McAfee Security Scan Plus
What have you done! 3 AV programs at a stage, specially two crapware!!! Get rid of them at once. Uninstall AVG using AVG Remover. Uninstall McAfee Using McAfee Removal Tool. NEVER use more than one real time protection program. Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

For your USB network adapters (EVDO) you need to do some general USB related troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Devi... Read more

Read other 9 answers
RELEVANCY SCORE 98

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98

For the last few days my system is hanging on shutdowns (and restarts) and eventually ending with a BSod. Please help :-(

TIA

Don

System Info:
? OS - Windows 7 Home Premium
? x64
? HP Pavilion DV6 less than 1 yr old
? Age of OS installation
? Core 2 Duo P8800
? ATI Mobility Radeon HD 4530

A:BSod Driver Power State Failure

Additional files

Read other 3 answers
RELEVANCY SCORE 98

OS - Windows 7 pro x64 - In place upgrade (since November 2009)

original installed OS - Vista Business x64 - OEM

System is 1 year and 3 months old

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz

Video Card - Nvidia Geforce 9500 GT (1GB)

Motherboard - Asus - IBIBL - LB (benicia)

power supply - Coolmax M-500B - 500watts

The past week I noticed that every time I put my computer to sleep, I would notice that my monitor would either stay on or I'm assuming after a short while come back on while the rest of the computer was sleeping. My monitor by the way is a Samsung Syncmaster 2232BW plus. I noticed this monitor staying on problem at least 3 times this week. So today, I left my computer on, and when it tried to automatically enter sleep mode, a stop error occurred. This is the first time that I got this blue screen as the computer tried to enter sleep mode. Other system information that might be useful: I have a wireless mouse and keyboard, both logitech and both are operating with setpoint. I also have a Creative SB X-Fi sound card installed. Furthermore, shortly before this post I went to device manager and updated the driver for my videocard.

A:Driver Power State failure BSOD

Hi -

The bugcheck on the single dump file -

0x9f (0x4,,,) = driver is causing an inconstant power state - it is not able to sync with the PnP subsystem. The default NT Kernel named as probable cause.

I believe it to be a combination of NIC + Norton Internet Security.

Your D-Link DWA-556 Xtreme N PCIe Desktop Adapter driver must be updated - too old for Windows 7 -

Code:

jswpslwfx.sys Mon Apr 28 19:59:25 2008 (481664DD)

However, there are NO Windows 7 drivers listed for it and the April 2008 Vista driver appears to be the most recent available.

D-link Support DWA-556 --> http://www.dlink.com/products/?pid=DWA-556&tab=3

If you cannot locate an updated driver, the device will need to be replaced.

Remove NIS/ N360 from your system -

Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Go to desktop, RIGHT-click on the NRT icon and select Run as Administrator. When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe

Reset the Windows Firewall to its default settings -
START | type firewall.cpl | select firewall.cpl above under programs | top-left, select "Restore Defaults"

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

.

Windows 7 RTM x64 -- BSOD Bugcheck 0x9f (0x4,,,)

Code:
Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello, having a driver power state failure. Can't figure out the driver thats causing the problem. Any advice on fixing? Thanks

A:bsod driver power state failure

Hello soupbox.

As a test, can you disable the webcam via device manager, and see if it continues to crash, or stops?

Whatever may the result be, let us know.

Read other 4 answers
RELEVANCY SCORE 98

Hi. I get Driver power state failure BSOD when putting T470s to sleep. Can someone help me identify the driver that causes this? I have dump files if needed. Kind regards

Read other answers
RELEVANCY SCORE 98

? Windows 7
? x64
? Original OS
? OEM
? about 1 year old
? never reinstalled

? intel core 2 duo p8700 @2.53GHz
? Nvidia geforce gtx 260m

? gateway
? p7908u
Hi there, I've been frequently getting BSoD's more and more as of late and I'm not quite sure why, any possible help?
And for some reason my perfmon report was not loading so unfortunately it's not in the zip. :/

A:driver power state failure BSoD

You have 26 BSOD (24 are from March 29th) that all point to your O2Micro memory card reader. The crashes start on March 28th. Is that when you installed this? Please either disable or uninstall this device

Please update your computer to SP1 - How to update to SP1
*Updating to SP1 might fix the issue with the card reader. You can re-install it after you update and see if the crashes continue


Code:
sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632)
yk62x64.sys Wed May 20 04:14:06 2009 (4A13BBCE)
Uninstall Daemon Tools. It is a known BSOD maker in Windows 7. You the tool found here to make sure it is completely removed.


Code:
iaStor.sys Thu Jun 04 21:53:40 2009 (4A287AA4)

Update your Intel storage drivers - here


Code:
NETw5s64.sys Wed Jan 13 11:37:13 2010 (4B4DF6B9)
Update your Intel WiFi drivers - here


Code:
nvlddmkm.sys Fri Jul 09 17:15:58 2010 (4C37918E)
Update your Nvidia video card drivers - here


Code:
RTKVHD64.sys Wed Aug 05 05:46:28 2009 (4A7954F4)
Update your Realtek HD Audio drivers - here

Partial summary of dumps

Code:
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Tue Mar 29 08:27:01.390 2011 (UTC - 4:00)
System Uptime: 0 days 0:12:52.058
*** WARNING: Unable to verify timestamp for o2sdx64.sys
*** ERROR: Module load completed but symbols could not be loaded for o2sdx64.sys
Probably caused by : o2sdx64.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROC... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver power state Failure BSoD

Hi,

The timestamp on the driver that is causing the crash (nvm62x64.sys) is Sat Oct 18 10:01:06 2008 which is far to old for a Windows 7 system. Try updating the drivers, you should find them here (look for your motherboard chipset): http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80039b5a20, fffff80000b9c518, fffffa800785f700}

*** WARNING: Unable to verify timestamp for nvm62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for nvm62x64.sys
Probably caused by : nvm62x64.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_... Read more

Read other 4 answers
RELEVANCY SCORE 98

I have the same message about power driver state failure occuring radomly every 10 - 30 minutes. However I do not get any error report to let me know what is causing it. Where would this be stored if anywhere? If not what should I do next?

A:BSOD Power Driver State Failure

Hi,

Please follow the http://www.techsupportforum.com/foru...ml#post2545708.

Regards,
Reventon

Read other 1 answers
RELEVANCY SCORE 98

Hi to all!
I'm r2. I'm having a problem on my system:
Processor: Intel core i7 875k, 9months
Motherboard: Maximus III gene, 4months
Memory: 8gb Ripjaws 1600mhz, 1.5year
Videocard: HD4870, 1.5year
Power supply: ocz sxsII 600w, 4months
Hard drive: WD 500gb, 1.5year

OS: Windows 7 x64
Observation:
Clean install OS 4 times. Shared the same symptoms
- it occurs when an application does not respond, but I can move through windows normally without lag. Then this application cannot be terminated under windows task manager. Since this application did not respond, I decided to shut it down. "logging off" for about 2-3minutes then "shutting down" for about 10-12minutes then BSOD appears stating "POWER DRIVER STATE FAILURE". It restarts automatically, freezes on windows log on screen (because I have to input password). Both mouse and keyboard does not move, even if reconnected. Rebooting the system on 'safe mode' does the trick on going inside windows, the event viewer shows: a bunch of 'network list service' and smb redirector shows at very short interval.

Even at 4th install of OS(delete drive, format to a new drive then install windows 7), error is still there.
It's been 2 weeks now, and it's very frustrating knowing that the error would show up.

thanks,
r2

A:BSOD Power Driver State Failure

Hi -

You have no Windows Updates installed.

Install ALL outstanding Windows Updates, including Windows 7 SP1 -

www.update.microsoft.com


Regards. . .

jcgriff2


`

BSOD SUMMARY

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Apr 30 13:29:01.674 2011 (GMT-4)
System Uptime: 0 days 3:08:37.658
Probably caused by : HDAudBus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_IMAGE_HDAudBus.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`066d3a20 fffff800`03fd9518 fffffa80`07364010
BiosVersion = 2103
BiosReleaseDate = 12/15/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
MaxSpeed: 2930
CurrentSpeed: 2942
??????????????????????????????????????????????????????????????????????????????????????``

Read other 17 answers