Over 1 million tech questions and answers.

Windows7/64 Pro recovery error

Q: Windows7/64 Pro recovery error

During recovery - error message: "system image created using efi and this computer is using bios"

My efi bios lists:
windows boot manager with efi label
dvd ram without efi label
dvd ram with label in addition to above when win7 install dvd inserted
hdd without efi label (ntfs)

Thinking it's a boot sequence problem I tried all possible combinations as well as the probable. In some cases I get missing bootmgr of course from the HDD and the familiar "this version of windows is incompatible with the system......." The most successful attempt and the error msg "image created using efi and this uses bios" resulted from any combination which had the non efi dvd ram before the hdd

This follows a virgin install of Win7/64pro and a successful backup to an expansion drive. The original win7 drive was replaced with an identical but empty target drive.

Asus p8p67 rev 3.1 with efi bios
16 GB RAM @1600 mhz
Sandybridge 2500k
Zoltec 560ti

RELEVANCY SCORE 200
Preferred Solution: Windows7/64 Pro recovery error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows7/64 Pro recovery error

Hello maxxx and welcome to Seven Forums.

Don't know if this will be much help but which system imaging tool did you use? There have been reports that the native Windows 7 imaging tool can be kinda useless at times if that's the one you used. Other recommendations include Macrium free, Paragon Backup free, and EaseUS Todo Backup free.

Read other 4 answers
RELEVANCY SCORE 61.2

Hi--My Pavilion G6 stopped working and the usual Windows7 recover options didn't work, so I sent away for a Windows 7 USB stick recovery kit from HP.  Following the included instructions, the notebook boots up off of the recovery stick, and gets part way through the recovery process but then displays this error: "Windows cannot find 'F:\System.sav\Util\Rstone.exe' Make sure you typed the name correctly, and then try again." This was an automated process, so there could not have been a typing error. I tried the process several times, but can't get past this point.  Does anyone have any advice on how to proceed? Thanks!

Read other answers
RELEVANCY SCORE 60.8

Greetings:
My computer froze during an update, upon restarting the computer I now I have a endless loop error.    A black screen appears with the following message.
"Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: \Windows\system32\config\system\
Status: 0xc000014c
Info: Windows failed to load because the system registry file is missing, or corrupt."
 
The computer is a gateway zx6971-ub10p, No windows installation disc was included,
(I had previously made one but am unable to find it, also don't have the box/packaging anymore). I do not care about recovery anything on the computer, I just need to get the computer working again for school.  
Windows Memory Diagnostic found no problems, Various Safe Modes, Last Known Good Configuration, Start Windows Normally,etc... do nothing. 
Was going to try http://www.microsoft.com/en-us/software-recovery but I don't even know my 25 character product key, no warranty from Gateway now, and no $ to take this thing somewhere.  
 
Is this computer toast?!?    
 
If anyone could help me out I would be so grateful!!!

A:Windows Error Recovery Loop(Windows7), Help Please !

Looks like the computer can't find the registry:

 
Status: 0xc000014c
Info: Windows failed to load because the system registry file is missing, or corrupt."

Several different things could cause this.  Start with these free, bootable hardware diagnostics:  http://www.carrona.org/initdiag.html
I suspect the hard drive, so be sure to run that test.  Also, run the MemTest86+ as I don't trust the results of the Windows Memory Diagnostic
 
Does the computer have a Windows sticker affixed to it?  If so, that'll contain the Windows Product Key

Read other 3 answers
RELEVANCY SCORE 59.6

Hello,

Yesterday morning when I turned on my laptop, I got the "BOOTMGR missing error". My laptop was working with no problems till the night before, so I don't know what happened. Anyway, I tried everything recommend on this forum and elsewhere to fix the problem. But nothing seems to work.

Since I don't have any important stuff on the laptop, I don't mind reinstalling Windows 7 if that would solve the issue. But I don't have a windows 7 installation CD. I have a Samsung R540 which came pre-installed with Windows 7. I went to the Microsoft recovery centre and tried to validate my windows product key but it is not validating.. Is this because my Windows is pre-installed?

Also from the command prompt I can see that I have a recovery partition. When I start the laptop, it says "press F2 for setup and F4 for recovery." But while F2 takes me to the BIOS screen, F4 doesn't do anything. While searching online, someone suggested that the recovery partition must be made active. So I went to command prompt and made it active and tried again. But it has made no difference.

So now I don't what else to do.. I don't really care about any data. I just want the laptop to work.. Is there no hope for me?? I would really appreciate any help
Thanks in advance

A:How to access recovery partition to reinstall Windows7?(BOOTMGR error)

Hi Anna,
have a read of this tutorial.
Bootmgr is missing - Fix

Roy

Read other 1 answers
RELEVANCY SCORE 49.6

So I tried to Reinstall Windows7 of the recovery CD, that came wiht my computer. Apparently its stuck on the "Installing Dritek Launch Manager(acer)"
6/32 for most then 2 hours. any ideas at whats going on?

A:Windows7? recovery?

Do you have an Acer computer? Your profile shows you running Vista? Is this Reinstall Disc for 7 for this computer? Pull the disc out and clean it of any smudges or fingerprints. And try it again. What Is Dritek Launch Manager? | eHow.com

Read other 16 answers
RELEVANCY SCORE 48.4

Hey guys,

I'd like to sell my laptop but i first want to restore the laptop to erase all my stuff.

My laptop is a HP pavilion dv7 2040eb, originaly bought with Vista on it together with a code which gave me the opportunity to upgrade to Windows7 with a reduction in price. So i have W7 running at this moment.

When I open up the 'Recovery Manager' of HP it tells me that it's meant for Windows Vista and that there is a slight chance that certain apps and drivers won't work no more... (so i didn't go on with the recovery)

Also I made a set of Recovery Disks whit the 'Recovery Manager' while i was running Windows7. But now i don't know if my computer burned Windows7 on the disks or Vista :s

I'm just worried because the factory setting was Vista, but i replaced it with Windows7 and I'm not smart enough to see which software i burned on the disk

I realy want to put W7 back on it because it's much better than Vista...

Hope you guys can help me!!
Greetings and thanks in advance!

A:HP pavilion dv7 vista/windows7 recovery

Follow these steps here. >>>>> HP Notebook PCs - Recover Windows Vista Operating System Using HP Recovery - c00809678 - HP Business Support Center

Read other 12 answers
RELEVANCY SCORE 48.4

CHANGED THE HARD DISK AND NEED TO REINSTALL WINDOW7, HOW CAN i GET THE RECOVERY DISK?

A:LOOKING FOR RECOVERY DISK TO REINSTALL WINDOWS7

HP will not have them any more. You can go to a third party site like  http://computersurgeons.com/ There are also still some "mirror" links to Windows 7 OEM images Microsoft USED To make available.  Post back with any more questions. I hestitate to post all the options since I don't know what you are willing and able to do. Was the laptop ever upgraded to Windows 10? If so reinstall is MUCH easier. 

Read other 1 answers
RELEVANCY SCORE 48.4

windows 7-64-bit Computer cpu &Everthing 64-bit ( and 32-Bit Format have's got) 950 GB HDD Sata  
 On the last computer,  Backup $MFT tar.gz type,Backup $MFT Gzip type,Backup $MFT zip type,Backup $MFT ?so type,Backup $MFT Rar type,Backup $MFT 7-Zip Type,....And Fat32 data recover& warning "Not Enough Disk Space low Memory" PartedMagicLiveCd
Boot(Ubuntu Boot)  Latest computer, broke before's
Wipe HDD No Registry Change,,7-Zip,HKEY_CLASSES_ROOT, Zip Commands,Multimedia Formats ,ActiveXplugin and Negative Cleaner ActiveXplugin And Won't Boot Computer,,...  And Windows Application Data Recovery(Because Other's Ubuntu Application Data Recovery
Testdisk&PhotoRec)  Windows TestDisk&PhotoRec    Warning "Not Enough Disk Space  

Read other answers
RELEVANCY SCORE 48

Hi,
 
I've had some problems with my computer and am consdering wiping out my hard drive and reinstalling Windows 7. The problem is: I don't have a windows cd to boot it from. My friend doesn't have one either, but he has his recovery disk. We both have Sager laptops but differing models. I was wondering if I could use his recovery disk just to reinstall windows using the microsoft product key under my laptop. Will doing this just give me the drivers that are compatible with his hardware and I can just remove them? I've downloaded my hardware drivers onto an external hard drive and was wondering if i could just load up a clean win7 os that way.
 
Thanks for your time!

A:reinstall windows7 using friend's recovery disk

Well...you need to understand just what recovery disks are.
 
They may rely on files which are on a hidden partition on the system's hard drive which was originally installed...they may not.
 
If the system is not the exact same model...using recovery dsiks from a different system is just an invitation to more frustration.  If you look at those retailers selling "recovery disks", you will see that they definitely are system specific...there is no general reovery disks which can be applied to different system models.
 
I also imagine that using someone else's disks...will result in the Windows license applicable to the disks used on another system...will show up on that list which Microsoft maintains for known compromised license keys.
 
Louis

Read other 4 answers
RELEVANCY SCORE 47.2

I had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel
Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that windows is unable to install to "thuis systems hardware" I have tried everything I know and was suggested via tech support.. Any ideas(besides buying a recovery CD or new OS) please help ASAP. Have college work due end of week.

And now its saying hardisk failure and bios is not recognizing my HDD..

A:Windows Failed Install after (Windows7) system recovery.

if bios is not recognising hdd it could either be a problem with drivers or your hdd is "fried"

Read other 2 answers
RELEVANCY SCORE 47.2

Plz Help!!

I deleted a few files like a year ago.. i placed them in the program files of other software in C: . Eventually when i uninstalled that software the folder was gone. Is it possible to recover it in anyway??

A:Recover deleted file without recovery softwares in windows7

A year ago is a very long time. Most likely Windows has long since over written that area of the disk to a point that anything that you would get would be very incomplete and unuseable.

Read other 3 answers
RELEVANCY SCORE 47.2

I have a question about this.

Right now I will upgrade my Vista laptop to Windows 7 . I already did it before with the RC and worked great.

Anyways there are certain functions on my laptop I use . So that's why I didnt do a clean install. But if there is any problem and I need to reinstall windows. I will have to install Vista first . Till SP1 is the best I believe and then again Windows 7 .
A big hassle if you ask me?

Is there a way to make a bootable DVD or something of my laptop once I upgraded to windows 7 and I take kind of a snapshot of that moment.
or something else'

Like when i got my laptop I had to make 2 DVD's so I could reinstall windows. Was hoping I could do the same with Windows7 somehow.

Another thing is. I have an English Windows Vista on a machine but will get a Dutch windows 7 upgrade. I don't think I can upgrade from a English to Dutch right? Although the upgrade is Ultimate?

I also can install an English version of Ultimate and use the key from the Dutch ultimate? or is the key from the box really only for the DVD that's in the box ?

thank you for your answers.

Eezdva

A:Make recovery disk windows7 upgrade from Vista

  
Quote: Originally Posted by eezdva


I have a question about this.

Right now I will upgrade my Vista laptop to Windows 7 . I already did it before with the RC and worked great.

Anyways there are certain functions on my laptop I use . So that's why I didnt do a clean install. But if there is any problem and I need to reinstall windows. I will have to install Vista first . Till SP1 is the best I believe and then again Windows 7 .
A big hassle if you ask me?

Is there a way to make a bootable DVD or something of my laptop once I upgraded to windows 7 and I take kind of a snapshot of that moment.
or something else'

Like when i got my laptop I had to make 2 DVD's so I could reinstall windows. Was hoping I could do the same with Windows7 somehow.

Another thing is. I have an English Windows Vista on a machine but will get a Dutch windows 7 upgrade. I don't think I can upgrade from a English to Dutch right? Although the upgrade is Ultimate?

I also can install an English version of Ultimate and use the key from the Dutch ultimate? or is the key from the box really only for the DVD that's in the box ?

thank you for your answers.

Eezdva


You choose your language upon installation,i did anyway.
And microsoft have language updates also.

I think as long as the key is for "ultimate" it will work.

Read other 9 answers
RELEVANCY SCORE 46.8

My aim is to have a Windows 7 bootable cd as Microsoft is going to kill Windows XP on April 2014.

I have Vaio laptop with Windows 7 Home Premium 32 bit with 4 recovery discs that I created but I haven't used it so far as Vaio never gave any trouble.

Is it illegal or possible to create Windows 7 cd from my Vaio laptop Recovery Discs so that I can use on my another desktop that has Windows XP SP3 as Windows XP era ends on April 2014 ?
 

A:Is it illegal or possible to create a bootable Windows7 cd from Vaio Recovery Discs ?

The recovery disk is only for that one Vaio laptop only. It won't work on any other machine as contains the operating system, drivers for that machine and activation key. It not only wouldn't work but would also be illegal. Why are you so concerned about XP coming to an end? It doesn't mean XP is going stoping working. It's just the end to support. Get a backup program and do I regular backup so you can get it back up and running should something should happen.
 

Read other 1 answers
RELEVANCY SCORE 46.8

Hello,

Unfortunately my disk is broken completely and I am not able to boot it anymore. Is there a way to download somewhere the data from the recovery partition?

My Model: Satellite A660-16Z (italian model)
http://www.toshiba.it/discontinued-p...lite-a660-16z/

Operating System: Windows 7

Next I tried to order from the web
https://backupmedia.toshiba.eu/landing.aspx
the recovery image, but after inserting the serial number, the web-system shows me the message:

For your device no recovery medium can be ordered, because it comes either not from the region of Toshiba Europe, or it is too old for this service


thanks in advance
Markus

A:Satellite A660 Windows7 home recovery data needed

The notebook belongs definitely to European series so the only plausible reason why you cannot order the recovery disk is: notebook is too old.
In such case you can install only a clean Windows 7 system. The essential drivers are available on the Toshiba EU driver page and could be installed after the system installation.

Read other 3 answers
RELEVANCY SCORE 46.8

Hi All

I installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?

Thank You
 

A:Solved: Does Windows7 Automatically create recovery partition during installation?

Read other 9 answers
RELEVANCY SCORE 44.8

Hi, I'm using recovery disks to recover Windows on my Lenovo G505 (the onekey recovery partition is corrupted). When I select either of the 2 recovery options using the disks I get the message "create recovery file (aodstat.dat) occurs an error" and I'm unable to proceed. Can anyone advise what this error means? The notebook is still under warranty. ThanksEd

Read other answers
RELEVANCY SCORE 43.2

I am trying to take back up of the files from my Laptop.
I used it for 2-3 days. 
Stages followed. 
I connected my laptop with a hard disk.
1. Welcome
2. Factory recovery media. After starting the application, following error poped up:an error occurred while creating the factory recovery media dell
3. Data back up to hard disk. No issues for this point
4. Finish

A:New laptop 5558 Windows 8.1 Dell recovery and Back up, Error: an error occurred while creating the factory recovery media dell

Hi,
Thank you for writing to us!
Kindly click on the following link:
https://www.dell.com/support/home/us/en/04/media
This link will give all the information as to how you can use Dell backup and recovery and if there are any other issues with the same.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 42.8

My pc came with preinstalled Windows 7 x32, later I came to know it is an OEM version.. now i want to switch to x64 architecture(same Windows edition), ..can I do a clean install Windows 7 x64 (retail) over my Windows 7 x32bit(OEM)....and use my OEM product key to activate it?

A:Windows7 32bit OEM Productkey to activate Windows7 retail x64bit

Simple answer is yes.
You will probably need to use telephone activation to get it activated.

Read other 1 answers
RELEVANCY SCORE 42.4

I have an HP Compaq dx2000mt desktop that has windows7 32bit enterprise installed on it. I tried to install windows7 home 32bit to replace the enterprise OS. As I was installing it stated the old OS would be marked, XXX.old and it went forward, then came to a point where there were booting errors. and it stopped installing. Now I am left with a half install, and a full OS the boot section now in its own drive named disk 0 system reserved.
I partioned the C drive and allocated 20gb and tried to install there. I received the same errors seems that my boot.ini is stuck in the system reserved and I cant figure out how to incorporate disk 0 over to disk C, so that my boot is in the same disk drive.
I have really messed this one up. I have installed an operating system before and never had so much trouble.
Any advice would be helpful.
And please if you have an answer, something for me to do, it needs to be A.B.C.'d out step by step as Im not an expert. But I guess I already proved that...
Thank you in advance.
Katz

A:Failed install windows7 home to windows7 enterprise

Clean Install Windows 7

Read other 9 answers
RELEVANCY SCORE 42.4

I keep getting an hyf.dll error every time windows starts up. I can't find where it's trying to load this file. the only yield using internet search referred to a virus. Has anyone heard of this DLL
 
thanks for your help.
LamarM1!

A:Windows7 load error hyf.dll

What exactly does this error say?

Read other 15 answers
RELEVANCY SCORE 42.4

Hi ı'm from turkish.
My english is bad.
ı apologize for errors.

Picture :



Please Help
ı can not connect to the internet

Note : now connection name 3g

A:Windows7 Connection Error

I assume you are trying to connect to the internet from your home. If you have a broadband connection - usually DSL, cable, or Fiber Optic Service - make sure you have what you need to set up your home network: What you need to set up a home network.

If you do have what you need, make sure you set up the network correctly: Setting up a home network.

You can always try your toubleshooting in Windows tool. Visit Troubleshooting in Windows to find out how.

Good luck!

Cheers,
Cassandra
Microsoft Windows Outreach

Read other 1 answers
RELEVANCY SCORE 42.4

OK i know many topics have already been discussed about the problems with sp1.

i tried to apply those but of no use so i thought to start new thread.

i am getting error 0x800f0826 evrything installs but after reboot while configuring installation stucks at 14% and it reverts back.

i have tried online and offline installation but of no use.

i am attaching few log files .

i am not able to add cbs log file since it weighs 51 mb.

a file called vew is taken an application called as vew.exe.

hope someone can help me with this.

thnx...

A:windows7 sp1 error and problems.

Hi firewire. May I suggest you google "Microsoft". The first hit should have a search box right there on the page. Type in.....error 0x800f0826, if you haven't done this already. I tried it and got a lot of hits pertaining to this specific error. I hope this helps. Please let me know.

Read other 9 answers
RELEVANCY SCORE 42.4

Hello guys,,

Noticed that frequently happening errors, slowing down and crashes often have to restart or close all browsing windows, is there any one tried some good software that fixes these errors before?
Kindly advise, it's really annoying when u are in the pinnacle of your work time and get shut down and restart everything again, plus wasting time too,
This error could be fixed by anti-virus program?
 

Read other answers
RELEVANCY SCORE 42.4

Hi guys , I have got 2 errors . The most important is that after I installed win7 in this pc ( I have 8 too but I want both) , There are some problems like I don't have internet ( can't detect networking hardware ) Mouse cannot be moved , resolution is like when I am in safe mode ...Etc , so I said what if I update when I install it , might fix some problems , I deleted them started the installation again , and then I pressed to update before install , and there was the 0x0 error ... I really need your help guys Also if you have any question about my specs , ask me :P

A:Windows7 Installation Error 0x0

The process is explained in Clean Reinstall - Factory OEM Windows 7. I would redo it and follow the steps to get a perfect install.

You may need to provide the LAN driver from the PC's or device's Support Downloads webpage, connect to your network to do all Important and Optional Windows Updates, after enabling Automatically deliver drivers via Windows Update (Step 3).

After all rounds of Updates are done with reboots, any drivers still missing should also be imported. You will likely get your display driver via Updates but if not import it as well.

Read other 9 answers
RELEVANCY SCORE 42.4

I had installed IIS on windows 7 local host page is not showing and also when i am going IIS manager in windows 7 when im going to start the service from the right but it showing some error

A:error getting after install of IIS on Windows7

Hi aRafay, Welcome to the forums Have alook at this Microsoft Knowledge article Error 0x80070020 when you try to start a Web site in IIS 7.0 It may answer your question

Read other 4 answers
RELEVANCY SCORE 41.6

Hi I am having a problem in that my laptop (brand new) seems to crash and upon restart offers to start in safe mode etc and when i boot up to desktop i recieve this error message...

dump files included.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA80047127E0
BCP3: FFFFF800042804D8
BCP4: FFFFFA800457A130
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Any help greatly recieved

cheers.

A:windows7 crash - Bluescreen error??

One of the dump files seem to be related to your nVidia video drivers.
Here's some info about the STOP 0x116 error: BSOD Index
A good suggestion for troubleshooting: http://www.sevenforums.com/crashes-d...tml#post280172
More discussion about the error (applies to all video cards, not just ATI): AMD Game Forums - ATIKMDAG.sys problems and TDR FAQ

The second error points to USB issues, and the third to your Synaptics touchpad
Also, your SFEP.SYS driver (from the Sony Firmware Extension Parser) is out dated (and a known troublemaker).

Please visit the Sony website and update your Sony Firmware Extension Parser

Then follow the steps for checking out your video card. If that doesn't work, please post back for more suggestions.

Summary of the BSOD's:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Tue Dec 29 06:21:01.864 2009 (GMT-5)
System Uptime: 0 days 0:40:36.970
*** WARNING: Unable to verify timestamp for dxgkrnl.sys
*** ERROR: Module load completed but symbols could not be loaded for dxgkrnl.sys
BugCheck 116, {fffffa8003f533b0, fffff88004c17b90, ffffffffc000009a, 4}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+5e8b90 )
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
PROCESS_NAME: System
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd6... Read more

Read other 1 answers
RELEVANCY SCORE 41.6

my windows 7 system with SP1 cant update, and returns error #80080005. windows help does not seem to be able to tell me what the error is! please help. switching the windows firewall off makes no difference, and i am concerened that security on my system is compromized. MSRT didnt work, i use microsoft security essentials for Anti-virus protection.

A:Windows7 update error 80080005

Hi and welcome to TSF the last couple of posts here seem to have helped this person Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Read other 1 answers
RELEVANCY SCORE 41.2

when i want install new programs in windows 7 64 bit it says error 2203
in the meantime my internet explorer no longer works and i cannot lo in to my skype as it keeps saying I/O disk error

A:when i want install new programs in windows7 64 bit it says error 2203

Hello and welcome melwan could we please have some system specs System Info - See Your System Specs

Plus run these first up and see if there is any errors

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < DO NOT run on a SSD

Read other 3 answers
RELEVANCY SCORE 41.2

Hi Guys,

Moved the thread from Networking as I got no answers... perhaps this will yield better results! This pop-up window (Thread Title) started to appear when pressing the button 'New FAX'. Second line goes on to say: Specified procedure could not be found.

Can anyone point me in the right direction of where to even start to look at where or why this problem is suddenly occurring? This seems to have started after a critical update but I can't be certain. I couldn't roll back to an earlier restore point as it only saves the last two or three (on every boot-up?) so there wasn't one earlier enough to try.

Thanks.

Sandy

Read other answers
RELEVANCY SCORE 41.2

Hello
Im windows user for a very long time and never had this problem but now time ago it started to show up when i play games moustly.somtimes i can play 5hours without problems somtimes even 30mins i get blue screen
Aybody could help please?

A:Windows7 Blue screen error 1st time

  
Quote: Originally Posted by rudions


Hello
Im windows user for a very long time and never had this problem but now time ago it started to show up when i play games moustly.somtimes i can play 5hours without problems somtimes even 30mins i get blue screen
Aybody could help please?


Love to help but there were no DMP files in the upload can you do this
If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Start your own thread in the appropriate section of the forum and attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

Read other 7 answers
RELEVANCY SCORE 41.2

Had a Hard Drive booting error 3f0 after installing (unsuccesfully) Windows 7 Ultimate x64 after Ubuntu 16.10 LTS. Cannot access OS, or GRUB (Boot Manager). Can boot OS via Boot from EFI feature.

A:Hard Disk error 3f0 after installing Windows7

Which OS can you boot? Linux? Sounds like the hard drive needs to be replaced. Can you get into F2 diagnostics as you boot up to run the hard drive check?

Read other 1 answers
RELEVANCY SCORE 41.2

Hi Guys,

This pop-up window started to appear when pressing the button 'New FAX'. Second line goes on to say: Specified procedure could not be found.

Can anyone point me in the right direction of where to even start to look at where or why this problem is suddenly occurring? This seems to have started after a critical update but I can't be certain. I couldn't roll back to an earlier restore point as it only saves the last two or three (on every boot-up?) so there wasn't one earlier enough to try.

Thanks.

Sandy

Read other answers
RELEVANCY SCORE 41.2

Well I installed this game called Overlord 2 last week, and have been playing it alot with it running fine. However, since yesterday, I've been getting Bluescreen errors after 10-20 minutes of usage every time I run the game! I'm not sure if its because of the game or my pc so I really need some advice.. Here are the error details..

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 17417

Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\022410-16504-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-35739-0.sysdata.xml
I am using a 3-4 months old Dell Inspiron desktop with Windows 7 Home Premium pre-installed and running on a 64-bit drive. My graphic card is an ATI Radeon HD 4350.. And also using Avira antivirus program ( The guard was disabled when I was playing the game though )

I also attached the zipped minidump file. Thanks in advance for your help!

A:Windows7 64bit BlueScreen error! Help needed please!

Still need help!

Read other 3 answers
RELEVANCY SCORE 41.2

My HP laptop had WIN7ULT 64BIT when buying it.But it's COA sticker states HOME PREMIUM. but i got ultimate key by using key finder software. Recently i reinstalled laptop it was activated to HOME PREMIUM with no problem. but when tried to upgrade to ultimate made hard getting error code 0xC004E003.but when i validate it seems to be genuine.copy.pl tell me how to activate my laptop to ULTIMATE.
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-V9488-FGM44-2C9T3
Windows Product Key Hash: rmk1OjF0iZq7gQoRmEcpnJHr0oc=
Windows Product ID: 00426-OEM-8992662-00010
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {3405CDBB-0FB1-4A5A-B8F4-BEA5E0F14767}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
Build lab: 7600.win7_gdr.120401-1505
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0... Read more

A:activation error oxC004E003 for windows7 ultimate64bit

If your COA sticker is only for Windows Home Premium, than unless you purchased an Upgrade, that's all it's licensed for - and any other Windows install is counterfeit.

You need to reformat and reinstall using legitimate media - either the manufacturer's Recovery media, or a retail license for Windows 7 Ultimate (or the recovery media + an Upgrade Key)

Read other 2 answers
RELEVANCY SCORE 40.8

I've been unable to update Windows for awhile so this really has nothing to do with Windows 10 distribution although the problem persists there as well. Upon researching Micriosoft's debuggin suggestions, I went to C:\Windows\SoftwareDistribution\DataStore and attempted to delet the file DataStore.edb as well as the contents of the Log subdir..In doing so I received a popup indication that I would
require administator privileges to complete the operation. So I clicked on "Confinue nothing happened, the cursor just returned. So I tried to change the name of the file so it would not be recognized by the system. This resulted in the same "Youl'll require administrator permissions" to which I clicked "Continue" and thar returned a message stating "the file or folde does not exist". So I tried going to the file properties and changing the file persmiission and received a popuup stating "Can;t open access control editor. The system cannot find the file specified.
 
I am the sole user and administrator of this laptop.
 
Can anyone tell me if I'm heading in the right direction and if so what to do to continue?
 
 
Thanks
 

A:Windows7 update fails (unknown error 80070002)

Did you ever register yourself as administrater?

Read other 3 answers
RELEVANCY SCORE 40.8

hi...folks....
i do have a big problem in my windows7...and this is the problem..



Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: deaddead
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\060611-15990-01.dmp
C:\Users\ACETHEPRINCE\AppData\Local\Temp\WER-30279-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows



any idea to solve this

A:Windows7 Blue Screen error - Bugcheck = 'deaddead'

Interesting bugcheck - deaddead

If you can boot the system -

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 40.8

Hello,

I have recently assembled a new PC with the following configuration

Motherboard - Asus M5A97 R2.0
CPU- AMD FX4100
RAM- Transcend DDR3 4GB x 2
Graphics card - Saphirre AMD RAdeon 5450 HD
HDD- 1 TB Seagate Barracuda Sata drive

After installation, i checked in the bios and found that HDD and the internal DVD drive was not detected. Once I changed the port settings to IDE I was able to see them in the bios.

However, once I tried install windows7, I keep getting the error "a required CD/DVD drive device driver is missing". This error has been discussed on this forum and others" however, none of the solutions worked. I have already tried the following

1. Used the Microsoft DVD/USB maker
2. Tried using and USB rather than a DVD
3. Tried switching the USB ports as suggested by one person on the net
4. I tried dowloading the AMD AHCI drivers on a USB and plug it in when the error comes and windows asks for the drivers. However, it is unable to locate it. In fact if I try to browse and select the drivers, the USB does not show up on the options. If I try the same thing with a dVD, then it says that windows cannot open the CD

So after 4 days of effort, net search etc. I am still without an OS. Can someone please help and also let me know if there is any compatibility issue?

Thanks

A:New System - drivers missing error in installation of Windows7

Hi,

Ensure that the USB is inserted into a USB2 port during installation. Unplug all other devices (with the exception of the mouse, keyboard and drive to be installed to). In your BIOS, ensure that the "Legacy USB" or similarly named setting is turned ON.

Where have you downloaded the Windows 7 ISO from? Only download it from this location:
http://www.mydigitallife.info/offici...digital-river/
Regards,
Golden

Read other 9 answers
RELEVANCY SCORE 40.8

Hello I need help I have a Acer windows 7 I tried all the possible recovery options the only that can help me is the command prompt I tried most commands but need help thank you
(I do not have a repair disk)

A:Recovery - Split from http://www.bleepingcomputer.com/forums/t/614188/windows-error-recovery/

Specific Acer model?
 
Louis

Read other 1 answers
RELEVANCY SCORE 40.8

I damaged my system recently (not physically) and it wouldn't let me login. I tried to use a windows restore point but it didn't work (they hardly ever have worked). Next I chose to do a factory reset of both drives, C and D. Next, I went to OKR and used a backup (on an external drive) I made very recently before the problems. Instead of working it said there wasn't enough space on the hard drive. I've never had this issue before and was not expecting it at all. When I made this backup....I plugged in the external hdd and made the recovery disk using OKR for the same internal hard drive. I'm not swapping internal drives or anything yet its telling me the image it made of itself is too large to transfer back. There would have been anywhere from 10-30 gb of free space on my 1tb c drive when I made the backup, I was not aware it would be an issue. I don't know what to do, that backup is extremely important and I don't have any recent one to it that works. I am currently using my backup from a year ago typing this now. I also noticed that the windows factory reset option deleted my D drive contents and the lenovo drivers folder on the D drive. THe OKR folder is still on the drive but none of the other stuff in it is there anymore that i remember having been there. My hidden icons tray in the bottom right is also missing alot of icons, alot are whited out. I'm not sure, but were drivers being kept on the D drive that I need for the system to work properly? I have no... Read more

Read other answers
RELEVANCY SCORE 40.4

I will try to be as precise as possible and give as much info as I can, but I'm not sure what info is inconsequential and what isn't at this point. But, here goes...

For 2 weeks I have tried to outsmart whoever it is that has had complete remote access to my laptop but changing as many admin permissions and incoming/outgoing connections that I could find to keep them out.

A couple of days ago, I did a system restore to factory settings, thinking this would do it. It didn't; he was still there. He locked me out of all admin tools yesterday.

I have a system recovery disc made about a year ago, and put that in my CD drive tonight, thinking I could completely reformat the drive and wipe him out. However, at start-up, I pushed F2 and came up with a screen that said something about running the disc from E drive (I apologize for not be able to give you specific language but I never thought it would get this far with no progress). However, under the line showing the drive it was booting from, there was another line that started "DETECTHAL /REDIRECT " then went on to say something about "redirect name" and redirect path", none of which sounded legit to me. And considering that this intruder had created so many other fake error/info msgs already, I didn't want to take the chance of this being something else that he had stuck in there.

I backed out of that reboot and restarted. I've subequently tried to restart over a dozen times from the CD, bu... Read more

A:HP Pavilion Recovery error and inability to get past HP recovery manager

It sounds to me like you have malware. I suggest running malwarebytes.

Read other 4 answers
RELEVANCY SCORE 40.4

Hello,

My computer has many corrupt files. I have done both sfc /scannow and chkdsk /r multiple times, but the corrupt files still remain. Unfortunately, my HP's recovery manager is also corrupt so I decided to do a full factory restore. Because I couldn't do a full factory restore from the computer, I ordered the discs from HP.
When ever I try to do a recovery from the boot menu (F8 or F11), I get the following error:

"Boot Manager:
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:

1.Insert your Windows installation disc and restart the computer.
2.Choose your language settings, and then click "Next".
3.Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

Status: 0xc000000f

Info: The boot selection failed because a required device is inaccessible."

I insert the disc, but nothing happens. The computer returns to the same steps. I even tried going through control panel and Full System Restore. Again, I get the same steps. When I press enter, it allows me to boot Windows 7 or do a memory diagnostic test.

I appreciate any help.

A:0xc000000f Recovery Error - System Recovery Discs not being processed

Hello and welcome sunnyxm well if yo are trying to just reinstall try this it will save all the bloatware from HP being loaded anyway.

REINSTALL

Forinstalling I prefer a disk to be honest but if you want to try again this isthe one to follow
CleanReinstall - Factory OEM Windows 7 make sureit is the right version ie Home Premium or Ultimate whatever you have a codefor and then the language and do not use the ones with a large "N" or"old" beside them.
You can use a disk or USB stick with this.

Read other 3 answers
RELEVANCY SCORE 40.4

I would like to know about an error that happens on IE11 in WIndows7.

When I open html5 files, an error window with the message below shows up, and IE11 is forced to shut down.
-------------------------------------------------------------------
Internet Exporer has stopped working
Windows is checking for a solution to the problem...
-------------------------------------------------------------------
This error occurs as a Windows or IE11 error outside of JavaScript engine.

The name of the module where the error occurs is ?mshtml.dll?.

There is a problem within the loadManifest function contained in html5 files.
But the loadManifest is a common processing by CreateJS(PreloadJS) - JavaScript library provided by Adobe Inc. Moreover, no JavaScript error is found in this case.

Also, the error has been found only in the html5 files that contain both images and sounds.
I have never seen this error in the html5 files with images only, or sounds only, or none of them.

Is this error on IE11 specific to Windows7?

Or can it be happened in Windows8.1 or Windows10 if I use IE to open html5 files?
Also, can it be happened on Edge in Windows10?

Read other answers
RELEVANCY SCORE 40.4

Hi everybody, i really need some help, i was trying to put windows7 pro 32bit on my gf's desktop she was using vista, and it was working just fine only really slow and i wanted to wipe it clean, i reformatted the partition and tried installing, it worked fine until about 25% and it blue screened with a pfn list error message, i tried to do the same thing again, it made it to 40% and did the same thing with the same msg. it was getting late in the evening and i had to get going leaving her stranded. if anybody has any ideas to get this working please help. i will attach screenshots and any other helpfull info a.s.a.p.

A:BSoD install windows7 professional 32bit PFN_List error

  
Quote: Originally Posted by delldawg


Hi everybody, i really need some help, i was trying to put windows7 pro 32bit on my gf's desktop she was using vista, and it was working just fine only really slow and i wanted to wipe it clean, i reformatted the partition and tried installing, it worked fine until about 25% and it blue screened with a pfn list error message, i tried to do the same thing again, it made it to 40% and did the same thing with the same msg. it was getting late in the evening and i had to get going leaving her stranded. if anybody has any ideas to get this working please help. i will attach screenshots and any other helpfull info a.s.a.p.



If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

Read other 2 answers
RELEVANCY SCORE 40.4

Hello! My problem is that update does not succeed KB976932 after updating this error code writes! 800f0a08 could someone help, so what could be wrong? Thanks in advance, George

Read other answers
RELEVANCY SCORE 40.4

Hey,

I've had this Dell XPS 15 (L502x) laptop with custom swapped SSD for almost 2 years now, and lately I've been getting BSODs, at start they were mostly kernel inpage error, now it doesnt even give a specific error and fails to do a minidump. I reinstalled windows, but still happens, usually while running something memory demanding, like playing a game or running a large postgres database.

Hardware specifics:

Disk Drives KINGSTON SV100S2256G Kingston SNA-DC/U USB Device
Display Adapters Intel(R) HD Graphics Family 3861.0859375MB NVIDIA GeForce GT 540M 2048MB
IDE ATA/ATAPI Controllers Intel(R) Mobile Express Chipset SATA AHCI Controller
Keyboards Standard PS/2 Keyboard
Mice and Other Pointing Devices USB Input Device PS/2 Compatible Mouse
Monitors Generic PnP Monitor Default Monitor
Sound Devices Realtek High Definition Audio Intel(R) Display Audio
USB Controllers Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
Renesas Electronics USB 3.0 Host Controller
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D


Since the minidump failed, at least made a screenshot of the last one:
imgur: the simple image sharer

Appreciate any help, thank you

A:BSOD in new windows7 64bit install,SSD, kernel inpage error

You have an F4 BSOD .

See if you could update the firmware of your SSD



   Note
As a precaution back up your files just incase it formats your drive to do the firmware update
Also you would need to take a look at the link below

Blue Screen of Death (BSOD) Posting Instructions

Read other 7 answers
RELEVANCY SCORE 40.4

I am running as an administrator on a Windows 7 machine which I have only had for about 3 months now. Despite it being a company laptop and running McAfee, I installed both Avast and MBAM. Recently, it started taking forever to boot.

Last night I tried running Windows Update from my home network, but I received a 80244019 error. I booted to safe mode and ran MBAM, Avast, as well as a Microsoft Safety Scanner. Nothing found.

This morning, in work, I noticed McAfee had picked up ~20 .tmp files in my Avast directory which I deleted from quarantine. I tried running Windows Update again, and this time it worked - nothing needed to be installed.

So the only thing that had changed was my deleting these temporary files (which I don't think did anything) and being on a company network which may have been the cause (DNS?).

I want to ensure I don't have a virus, however, since the 80244019 error states the *probable* cause is a virus.

I've downloaded and run ComboFix and the log is attached.

Is there anything else I should do here?

Thanks!

Matt

A:Windows7 - Slow Machine and Auto Update Error 80244019

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/424787 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 2 answers