Over 1 million tech questions and answers.


Q: Repairing

My computer is an acer and im wondering if i can download a reairdisc to a usb or a disc

and would you recommend i download one, buy (if able to) or borrow a friends if it is an acer aswell

Preferred Solution: Repairing

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Repairing

Hi -

Contact Acer Support --> https://secure.tx.acer.com/RCDB/Main.aspx?brand=acer

Regards. . .



Read other 3 answers

How do i repair my IE? My yahoo isn't werking and they suggest that i repair my IE. I have xp home on my lap top. thx


Read other 8 answers

SIZE="4"] ...,- I just refformated my PC because of virus. After formatting, while installing windows XP some problems occured like this "cannot install ethernet controller driver, and cannot install hardware"... After that the blue page appear saying that "If this is your first time to see this, try to check for viruses, run chckdsk... disable bios shadow.. etc.. I try installing windows xp again but the same problem occurs. Please help me, what should I do??[/SIZE]

Read other answers

My computer will not boot.
It says safe mode, safe mode with networking, start normally, but none of them work it just restarts the computer and brings me back to this screen.
So, I want to repair xp by inserting my disk to the computer.
I did this, but when i open bios, and go to the boot option, it does not give cd rom as an option, it says floppy disk drive, and two other options. I tried all of them, they don't work.
I also tried copying all of the data from my cd, onto emy usb.
When i turn on eh computer and open bios, it recognizes my usb! I chose my usb to be boot #1, exited bios, and saved changes.
When i restarted / booted my computer, it does not boot my usb, it says "operating system missing"

P{lease help, what am I doing wrong.

A:repairing xp

Your PC will not boot from the USB drive because there are no 'boot' files on that drive. The XP CD contains boot files sure enough but you can't copy those boot files to another drive by simply copying all the data from the CD onto the USB drive. Boot files cannot be copied like that. And with no boot files, your system will ignore the usb drive.

To copy everything including the boot code from cd to usb drive you need to make an ISO image of the cd, then burn that ISO image to your usb drive. You can do that with an app called "MagicISO" from here:

If there is no cd-rom drive available in the boot sequence options it probably means you need to fit a new cd-rom drive because the existing one has come to the end of it's life.
Either that or the option is there but you don't realise it. It may be called "DVD" or "DVD-ROM" in the BIOS if the drive can read or write DVD discs.

Read other 2 answers

Hi there. I have a but of an unusual problem and perhaps this belongs in the hardware section.

Anyhow, after been away for a few days I turn on my computer and it tells me that I need to repair my XP since there is something wrong with the /system32 folder or whatnot.

I have the CD to repair, however my keyboard is a USB type and deactivates after the initial boot window, not allowing me to proceed from the "Hit any key to boot from CD device....".

I'm wondering if there is any solution to this short of going out and buying a keyboard that uses a standard keyboard connection.

A:Repairing XP help

Read other 6 answers

My computer's hardrive recently had some problems and i've narrowed the problem down to the MBR. I put in a windows XP cd and tried to use the recovery console but I do not know the administrator password on this computer since it is school issued. The only way I can use this computer is by running knoppix on it. Is there any way I can restore the MBR through Linux or through another program?

A:Repairing the MBR

If it's a school issued computer, take it into the school techs and let them deal with it?

Or talk to them and get the password.

Read other 4 answers

Hi, I have recently repaired my Windows 2000. After repairing Windows 2000, I did not expect that all my files and programs would switch places to other drives. For example, the VLC Media Player was once in G Drive. Now, it is in H Drive. Also, my disc drives used to be I and J Drives, but it is now M and N Drives. Is there any way to change everything back to normal as it was once was without having to change the Target location of the desktop shortcut? I personally liked how everything it was before. Basically, my question is how to change everything back to normal as it was before repairing Windows 2000.

If there's no way in changing everything back to normal, I guess I will have to make a backup of everything in each of my drives, delete the drives, and then start everything over again by partitioning it if I can although it will be really frustrating for me.

A:After Repairing

Normally it should change like that but I think the only way you have to get it back as before is to backup all your files and re-install windows with new partition.

But before doing that try to repair windows 2000 once more and if it is the same then re-install windows

Read other 2 answers


This post is in regards to two previous threads. I posted in the Hijackthis forum and it turns out that I probably do not have a malware issue. That post is here: http://www.techsupportforum.com/secu...-symptoms.html

The original post, in this forum, is here: http://www.techsupportforum.com/secu...-moved-xp.html

Here is a breif re-cap of the symptoms I've noticed:
1. When opening a folder, the system freezes for 15 seconds, then it is fine. Programs do not seem to have this problem, just folder windows.
2. XP's built-in .zip viewer tool doesn't work. I see an hourglass for a few seconds, then nothing happens.
3. Cannot use the Run or Internet buttons on the start menu. Instead, I get the message: "Cannot create shortcut here. Would you like to create a shortcut on the desktop".
4. My "send to" list after right-clicking is populated with only 1 entry (some 3rd party nonsense).

My belief is that I've got a corrupt explorer and maybe something else. An sfc scan asks for the XP disk to restore system files. Unfortunately, it asks for the XP discs, which did not come with my computer. I've tried to point sfc to my 386 folder, but that was unsuccessful.

I greatly appreciate any help you can offer.

- Kevin

A:Repairing XP

Do you have a recovery partition? What is the make/model of your pc?

Read other 19 answers

Hi everyone!

I have been reading articles all over the place about repairing XP. I have certain problems such as my taskbar disappeared and Windows Sounds and Flash Movies Sounds not working. I have tried every method on the internet to fix this, but does not work. Although there is 1 method that kept being mentioned which I haven't tried yet because I'm not really sure how to do it. Anyways it said something about make sure the CD boots up before the harddrive? I have no idea what it means. It mentioned I have to configure my BIOS or something, and there was a list of options of what to do with what BIOS. Anyways I dunno what that means, but my BIOS is American Megatrends, Inc. .
I need more information on how to repair my XP with those information I have provided above. Please PM me or post here with more information on how to repair my Windows XP.

Mature Lamb

A:Repairing XP - HELP!

Hi what it means is that when you put your xp windows in the CD drive make sure that this is the first one to do this.When your computer starts up keep pushing up and down the delete button or if that does not work, then shut it down and push f2. A scree will come up in front of you this is where you need to go, on the first or second menu, scroll through that and you will come upon a list saying floppy, IDE, WHICH IS YOUR hard drive, or CD.Look at the different options of how to alter and save, make cd your first, IDE, Second, and floppy the third one. when you have altered them press f10 to save it will ask do you want to save changes n/y press y press enter, and your computer will now carry on as normal. Now when you come to install windows again PUT your disk in cd drive and it should now recognise it.I hope that has cleared up one or two points.

Read other 4 answers

Well I have tried to use SFC and it tell me that my XP disk is the wrong one. Reading the forum, I downloaded and ran keyfinder and wrote down the results. Checked the label on my computer and the key is differant. So should I just do a new install or should I backup my program link or what. The install that came on the machine has some minor problems that I find very annoying like; send to doesn't work, my computer take about 3 minutes to find my files and disk, same with explorer yet my network places immediately finds the HD drive but not the DVD drive.

Any help is much appricated. Thanks

A:repairing XP PRO with bad CD key

Hello tricker3, Welcome to TSF!


Well I have tried to use SFC and it tell me that my XP disk is the wrong one.

Could you please explain what you meant by this?

When you are running the sfc scan, are you getting a message that says "Please insert your Windows?XP CD?" if you are, just click on retry and let it do its thing; this might happen on a number of occasions whilst sfc is scanning, which is quite normal.

When using sfc however, it is very important that you use a compatible Windows?XP SP2 CD...what this means is; you must use the same version CD to what is installed on the computer.

If Windows?XP Home is installed the CD that is to be used must be a Windows? XP Home Edition CD.
You cannot use a Windows? XP Professional CD on an installation that has Windows? XP Home Edition installed, and vice versa.


The install that came on the machine....

Please tell us the Make and Model of your computer; generally Windows?XP Home is the usual pre-installed Operating System.

Please post back with the information.

Kind Regards,

Read other 4 answers

I downloaded support tools from my cd, but I don't see anything that will help me to repair my OS. If anyone knows what to do, please help me. Thank you.

A:Repairing OS.

Read other 8 answers

...,- I just refformated my PC because of virus. After formatting, while installing windows XP some problems occured like this "cannot install ethernet controller driver, and cannot install hardware"... After that the blue page appear saying that "If this is your first time to see this, try to check for viruses, run chckdsk... disable bios shadow.. etc.. I try installing windows xp again but the same problem occurs. Please help me, what should I do??

Read other answers

I go to surf the web and it says page not able to be displayed. So I try another page, etc, etc. I figured out that by repairing IE 5.5 it fixes the problem but it comes back. What would cause this ? BTW I am using Win 98 with dial up.

A:Why do I have to keep repairing IE 5.5?

Read other 10 answers

Daughters computer K6-2 450, 64mb ram, win98SE.
Updated IE5 to IE5.5sp1 because she could not get online(e-mail worked).
She still could not get online and tried to run the IE repair in the control panel. She said nothing happened, the ISP tech told her to uninstall IE and reinstall it. I have asked her if there was any error message or just no responce.

What's the way to uninstall IE or will I just go back to the IE5?


A:IE5.5 sp1 not repairing

Read other 16 answers

hi i need some help, or explaination.

i am trying to a repair on my wind xp from the original disk and need some help.

i am a little puzzled as to why the repair stops. i am repairing the O/S that is already installed (not using the Console repair)

1.boot from disk
2.chose partition
3.hit R to repair the instalation originally installed

then it stops 13 min prior to completion.

Suggestions anyone?

A:Repairing XP

At T -13 the installation is processing SVCPACK.INF
A typical SVCPACK.INF file looks like this:


;Windows XP
Signature=" NT$"



Q330994.exe /Q:A /R:N
Q819696.exe /Q /O /N /Z
KB824146.exe /Q /O /N /Z

It is qchain that resolves new hotfixes with existing hotfixes and controls versioning. (http://support.microsoft.com/default...b;en-us;296861 )

Unplug everything but mouse, keyboard, display adapter and monitor.
Restart the installation.

If it still hangs, you will need to extract SVCPACK.INF, edit it as follows below and place it back into the XP image. Then reburn. It might be best to image an ISO from the installation CD, edit the ISO with something like ISOBuster, and reburn as an image file type ISO.


;Windows XP
Signature=" NT$"



;Q330994.exe /Q:A /R:N
;Q819696.exe /Q /O /N /Z
;KB824146.exe /Q /O /N /Z

Read other 4 answers

Hi, I have an Acer Travelmate and run IE 11, windows 7 64 bit. For the last couple of weeks every time I log on there is a message telling me I have " File system NTFS and one of the discs needs to be checked for consistency". I have run computer repair and checked all up-dates are installed.
As this occurs every time I log on there must be something fundamentally wrong but I have no idea what. I would really appreciate advice please on how to fix this problem. thanks very much.

Read other answers

Hello - I have a DELL Dimension 4700 running WINxp w/ sp2 and sp3. The warranty ran out 12/19/08. The PC crashed today!

I want to repair windows from the disk. I boot from the disk and select R for repair. It asks what installation I want to repair and I select 1 - it is the only installation. Then it asks for an admin pw. I don't know this. I called DELL and they want $50.00 to fix it..., no options. It's the last DELL... probably the last PC...

Can I get around this somehow? I went into setup and changed the ADMIN pw to admin. Went back to the boot screen and entered the password.. It took me to a DOS prompt. I have not tried DOS since 1986.

Can someone provide some help... I would greatly appreciate it.

I did extract the HDs and I harvested all the files I need to another machine... a MAC!

Nonetheless, I would like to repair the OS without a reinstall if I can...

Thank you,

A:Repairing WIN XP

Pass on the first chanced to repair and proceed to the second . . These are good guides to performing a repair install


Unless you changed it the admin password is blank . . just press enter

Read other 7 answers

I am having problems with slowness and all other rubbish problems and I do have my three recovery disks. I am wondering if I can do a REPAIR to WIN XP with one of the disks, instead of a complete format. I don't want to lose some of the old programme I have downloaded. Now if I was to do a REPAIR, then I guess the IE would be either IE 6 or 7, which I guess wouldn't hurt.

Your views would be appreciated.


A:Repairing WIN XP

Read other 16 answers

Hey every one

Well short and simple I deleted my Windows media player 12 is it? From windows 7 and I simply can not install it because I have tried getting the files from some one else and it says you have a newer version and you can not install an older version,

So I need some help? I am not sure how to do a repair.

A:Help repairing.

Hope this helps:

Repair Install


Read other 9 answers

After repairing my computer from a display message that says "Windows could not start because the following file is missing
WINDOWS\System32\System" or something like that, i went through repairing it from a website. Then after, it had no sound even when speakers were plugged in, the LAN connection doesnt work and will not let me work it, the windows move slowly. I think I have to install some kind of drivers, can anyone help??????

A:After Repairing

What exactly did you "repair" and what website did you use to do it?

Were you experiencing any other problems before the failure to boot?

Read other 3 answers

What is the best way to repair IE 6.0 with Windows XP Pro?

You used to be able to do this via the control panel/add remove programs, but it's not listed in there anymore

A:Repairing IE 6.0?

Read other 16 answers

My friend's computer got nailed by SpyLocked, so like any good person would, I directed him to smitfraudfix to help him out. He followed the directions and all, but when he tried to restart, ended up with an "autochk not found" error, and ended up locked in a deathloop. We found his XP CD and tried reinstalling, but we're kind of stuck on what to do. He's got some things in his My Documents folder that he'd prefer not losing, but when it came time to chose where to install it, we couldn't chose to create a new partition, and we don't know what'd happen if we overwrote the windows folder, since it states that the My Documents (and other like folders) may be deleted. Does anyone have any advice or know anything else about this?Moderator Edit: Moved topic to more appropriate forum. ~ Animal

A:Repairing The Os

I have been hit with the spylock as well. I did the smitfraudfix thing and cannot get my computer to boot up at all. I think you called it the deathloop.

I will be keeping an eye here to see what replaies you get because I have two programs and My Documents that I can't lose.

Good luck,

Read other 11 answers

Hi all,
Each time I right click on my favourites to place them in alphabetical order IE 8 seizes. I have tried Tools / Internet Options / Advanced Reset. I have also turned it off & back on again via Control Panel but the problem remains.

I have visited the Microsoft web site to try & download IE 8 to re-install it. I go round in circles, until I finally opt for downloading IE8 for Vista. (The only one I can find) When I try to install I'm told that my operating system does not support IE8 yet I'm running it!

Any sugestions please?


A:Repairing IE 8

If you already have IE8 it cannot be uninstalled or reinstalled. The best you can do is turn it off. That being said, go to tools>internet options>advanced>reset. The problem is most likely not IE8 but one of the add ons. My instructions will remove them. You can replace one byone until you find the problem.

Read other 3 answers

Help me out. I want to "repair" a certain dead PC. It's one of those "Digitek" types. It used to run Windows 98 Here are things as of now:
1: The hard disk is dead. The PC powers (I can hear some wierd "di di di" as the disk head tries to read) on and displays "Searching For Master Boot Record On SCSI...Not Found, Insert System Disk And Press Any Key"
2: Before it spoilt, it used to display "X is not accessible. The device is not ready". X represents both the floppy and CD drive.
3: I downloaded a Windows 98 bootdisk from the net and copied it to a floppy. Tried booting from the floppy but it failed.
I have a new hard disk which I want to install on the PC. Can someone tell me how to go about it? Just a guess: Could the drivers for the floppy and CD drives have been deleted because device manager used to report that there were two "unknown devices". Below are the specs of the PC:
AMD Duron 1200+ processor, 96 MB RAM, DiamondPlus9 Maxtor 80 GB HDD(this is the one that died), 25 MB RAM SiS integrated video display. Anyone having any questions just ask them.

A:Help Repairing PC.

Second post has been replied to... Tell us then what else you need to know, and how much detail you need.

Read other 1 answers

Good day.
It seems my basic windows codecs are broken and I don't know how to fix them. So I decided to ask some kind person to help me. My operating system is Win 7 and here are codecs that codec sniper marks as broken.


Thank you very much for you help. I tried uninstalling all codec packs and installing new ones, but it did not help. I think these are windows specific codecs and I haven... Read more

A:I need help repairing codes

Hi, welcome to the forums, what problems are you experiencing, and what makes you think these codecs are not OK?.. codec sniper was written in 2004 if it has been upgraded I am not aware, next to the broken does it have a blank where version should appear... most likely cannot identify the new codecs, post back about where you got codec sniper from.

Read other 1 answers

hi all i am new to this forum and could do with some help please.

i recently brought a asus pc tower which came with windows 8.1 installed.i am finding that c drive keeps needing to repair on start up.i keep checking in c drive tools section and c drive shows no faults but at least once a week when pc is switched on it needs to repair its self.

my knowledge of pc is very basic so any help in it most simple terms would most helpful.

many thanks

A:c drive keeps repairing?

Windows X key + X, select Command Prompt (Admin)
Type: sfc /scannow

If it is unable to correct all corrupt system files, type:
Dism /Online /Cleanup-Image /RestoreHealth

Then the sfc command again,

These processes will take a while to run, let them run.

Read other 4 answers

I tried to repair windows xp and now my computer has low disk space and wont allow me to install the service pack updates or any of the drivers. please help.....I so don't know what Im doing...I would love to restore it back to its factory settings. I think the computer is to old..I would love some help...Thanks in advance for your help..

A:Repairing windows xp

What Make, Model and Brand of computer do you have? Do you have a restore disc(s)? Or do you have a Restore Partition (check your computer documentation if your not sure) If so, boot off of that and follow the instructions to restore your computer to factory settings.

Read other 2 answers

I just bought THIS video card on Ebay. I figure, if I can get this thing fixed for a minimal price, I just got myself a smokin' desl on a graphics card. He claims it was softmodded to unlock all 8 pipelines, which to me, makes no sense. The card would've had to be a 9500 non pro, softmodded to open up the remaining 4 pipelines, then overclocked to 9700 pro settings. I e-mailed him, asking him exactly what he meant by softmodded, if he even knows what's actually going on. What do you guys think? Good deal or no?

A:Will need help repairing 9700 Pro

It's sounds like you got the 9500 series. You're right, the 9700 already got 8 pipes. I'm guessing you might wanna try and flash it with a 9500 bios. And if it works, at least you got a working card.

Read other 3 answers

I need help to repair my music CDs. I got a skip doctor to fix the bottom parts. I need to fix the tops of some of the CDs because the foil/laquer rubbed off. Is there a way to repair this? I looked on google but I couldn't find anything. REally useful to repair with. Anyone got some methods? I thought like nail polish but really got no clue. Thanks


A:Repairing Music CDs

Read other 13 answers

Hi all,

My laptop has suddenly started to display the following message on startup:



I have done some reading into how to get everything back to the way it should be, but so far have not had much luck. I am not too clued up on computers and don't understand most of what I am reading on other websites. Having also tried the Windows XP recovery CD, my laptop doesn't seem to detect it being there, and the same message continues to display.

I would very much appreciate it if anybody could provide some step by step instructions on how to rectify this problem. Ideally, I would prefer not to re-install Windows as I have lots of files that I still need.

Many thanks in advance for your help.


A:Repairing my Windows XP

although the system files is missing i would try booting into safe mode. when your computer boots up keep pressing f8 or f9 dependign on the company and enter safe mode and log in as normal. if that doesn't work you will need to go into the bios by either pressing f1 or del, or tab during the post. or boot up. from there go to boot order and make sure that it booty like this
3.hard drive
if you do not have floppy then cd should be first. when it has booted from cd choose the repair option. this will take you to recovery console and what you will need to do is replace the files. in recovery console login by pressing 1 and if you have password you will need to type it. in the recovery console type sfc /scannow. and this should try to replace the files.

Read other 2 answers

Hi Again,

This is actually a new problem I guess. I'm just dumb
enough to realize that the problem I've been having
in recognizing a "new" HDD added on to a working
unit involves the FAT32 table.

The system is now recognizing the drive, but I can't
see any of the files therein.

Soooooo, how do I rebuild the FAT table to "see"
the drive's contents ? The system runs incredibly
slow because of that 2nd drive. I'm sure it's looking
for file locations.

Ideas ?

Thanks in Advance

A:Repairing the FAT table ?

Read other 16 answers


Recently my internet went out, called the cable company, had it restored. Thought everything was great. However, when I try to connect using the computer in MY room, the internet doesn't work. It says something about not being able to load the page and for me to check the firewall settings, etc etc. At first I had trouble repairing the IP address. I went and plugged the IP manually from the main pc (with the router directly there) to mine and now it's connected but with no internet... Hope this all makes sense...


A:Help with repairing IP address please???

To re-establish networking via a cable (I assume you are using a Cable Router for this) it takes more that JUST calling the cable company and having them refresh the cable box.

Contact the cable's Network Support and have them help you with that. Cable Network is a separate issue from the Cable Box. You MAY have the issue of the cable's left-hand NOT talking to the right-hand.

Read other 4 answers

I have a HP computer that has XP Home w/ SP2. But winlogon.exe seems to be infected, taking up much memory or something, preventing the computer to act up to speed. So the computer boots up but takes FOREVER to do anything. So I've been trying to repair XP without deleting everything so that I can quickly back up my files and then uninstall Home and install Professional.
So I've tried repairing with a friend's slipstreamed SP3 Cd. I've done my research on how to do this but my computer is acting quite strange. I've been able to get to the Windows screen saying it's installing drivers and completing installation. But after it seems to be done, the computer restarts without warning. This reboot is never mentioned at this specific moment in many guides. The screen is supposed to change and say Thank You but I never get it. So after I reboot, I've both let the cd in and taken it out. Both times, the computer goes back to installing XP. It doesn't get any further. If I take out the CD, the screen goes to that part of the installation and asks me to put in the cd.

The first time I tried this about 2 days ago, I got an error saying that my CD was missing i386 or some file containing that phrase. But after that first try, I've never gotten that popup again. What am I supposed to do? I'm thinking of getting a different XP Home Cd because I would really like to backup my files.
Thanks in advance

A:Repairing XP Home that has SP2

Dude, you should probably get the CD that you originally installed Windows XP with and try it with that. If that's not an option, and you can't boot into safemode, you should find a Ubuntu CD and boot off of that. Then grab exactly 17 flash drives and start transferring the data off of the Hard drive, onto the 17 flash drives. That's what we usually at the Helpdesk.

Read other 14 answers

Is repairing WinXP the same as installing a new windows but without losing any files or programs installed?

I want to try it but just to make sure is it safe? what happen to the recent updates to WinXP and other saves in System restore? can anybody tell me in details what will happen after repairing WinXP?

A:Repairing WinXP


It is always best to make a backup if possible.

The repair process if successful would leave your system settings and applications

intact. You will have to reapply the Windows Updates.


Read other 2 answers

Problem with OE6. Can not send email. Message says my address is not recognized. Browser IE7. I went to add/remove programs and selected IE7. No repair option - only for removal. OE6 is not listed there. I opened OE6 and checked the properties and all is correct. I also uninstalled the account and re-entered it - no help.
This is what I get when trying to send email:
The message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was '**********'. Subject 'test', Account: 'incoming.verizon.net', Server: 'outgoing.verizon.net', Protocol: SMTP, Server Response: '550 5.7.1 Authentication Required', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC78

Any help appreciated

A:[SOLVED] Repairing OE6

The ultimate IE6 repair solution...

Read other 17 answers

I have a hard drive with windows xp pro but i believe it has corrupted. I used the windows xp cd (retail version/ not OEM version) to repair it but it did not detect my previously installed on my hard drive. (after selecting option:To setup Windows XP now, press ENTER there is a screen showing:
* To repair the selected XP installation, press R
* To continue installing a fresh copy of Windows XP
without repairing, press ESC
and there should be a white box below showing C:/WINDOWS "Windows XP Professional" but it did not appear. Is there anyone I can repair windows xp without reinstalling a fresh copy.

Note: I have a extra hard drive with a working windows xp where i can copy/ paste or modify files if necessary.

A:Repairing Windows Xp

* To repair the selected XP installation, press R
Doing a Repair install will not change or loose any of your files.

Read other 19 answers

I recently got this message while I was trying to boot up my comp. Windows could not start because the following file is missing or corrupt: \Windows\System32\Config\System . Now this has happened before a couple times to my computer. I bought a new hard drive thinking that maybe my old one was the problem. But I had XP installed on my new HD and within a couple days this same message came up.

Normally I didn't even bother with trying to repair it like the error message suggest. But this time I tried to repair it and whenever I click on the hard drive 1 and hit enter it freezes. So I tried to reinstall XP and it will get as far as searching for old versions of windows and it will freeze there. I'm stumped on what to do to fix this problem. Just want my comp working again, and if you have any ideas as to what is causing this problem and how to prevent it from happening again I would greatly appreciate it.


A:Need help repairing or reinstalling XP

Boot from your Windows CD and get into the recovery consolse. Once in there type in the following 9 steps The following {} are comments do not type those in.

CD .. {this will get you to the root of your drive}
ATTRIB ?H C:\boot.ini {this will remove the hidden attribute of the boot.ini file}
ATTRIB ?S C:\boot.ini {this will remove the system attribute of the boot.ini file}
ATRIB ?R C:\boot.ini {this will remove the read only attribute of the boot.ini file}
del boot.ini {or if you're really paranoid rename it to boot.tmp}
BOOTCFG /Rebuild {this part may take a while... when you get prompted for Enter Load Identifier: type in the version of Windows you have (i.e. Windows XP Professional)... when you get prompted to Enter OS Load Options: type in /fastdetect /noexecute=optin}
CHKDSK /R {this will check your drive for errors and attempt to fix bad sectors}
FIXBOOT {when asked if you want to write an new bootsector just hit Y and enter}
EXIT {to reboot your machine - make sure you take out your Windows CD}

Read other 8 answers

I installed the Windows 7 beta a while ago and dual booted with Windows XP Pro. I have since decided to use only XP and deleted my Win 7 partition. The problem is, when I boot my computer, I am still having to go through the dual boot process, although Win 7 will not load. Since I installed Win 7 second, its options are always first and I cannot change them in Win XP. I think that if I repair the MBR it would fix this problem but I do not have a XP Pro CD, I do however have a Windows XP Home CD. Can I use this to repair my MBR or will I have to continue manually selecting an 'older version of windows' in my OS selection screen? Thanks for any help.

A:[SOLVED] Repairing MBR

I can't say for sure that the Windows XP Home CD will work, but you can try.

Insert the CD, reboot and make sure your computer is set to boot from the CD drive. Go into the recovery console, and enter the following commands:

When it's done, reboot to the hard drive and you should be set.

Read other 7 answers

I have a Compaq, I got back in 04 with XP preloaded. It is a computer I do not use much but a while ago while loading a update the system seemed to crash and the update failed. This is a update past SP2. Windows managed to come back but I have major problems.

1. No original main windows programs will work... That is IE, Windows media player ect...

2. Not only will the programs no work but they will not uninstall or update.

3. I also can not uninstall any of my previous windows updates and the no new updates will work.

4. The main error message I get when starting Windows or any non working programs is..

"The procedure entry point SHRegGetVAlueW could not be located in dynamic link library SHLWAPI.dll.

5. Of course with Compaq you do not get the main Windows XP cd so repair function does not seem to be a option. I have tried system restore but it seems all my restore points before this crash are corrupt and do not work. Have tried using the "Recovery CD" that I think goes with the computer but it does not work and I am unsure if it is the right one... but it should be.

Question: I have windows XP cd for updating to Windows XP... can I use this disk to repair my current version of windows...

any suggestions would be helpful...

another main side effect of this is all my USB ports seem not to work now...

A:repairing Windows XP

Hello quiller, Welcome to TSF!

You might like to try this workaround (you will need your Windows? XP SP2 CD).

(In the event that you do not have a Windows? XP CD with SP2, you will need to 'borrow' one from a friend or colleague, as the manufacturer's "Recovery Discs" will not work in this instance.)

Insert the Windows? XP CD in your drive. (Hold down the Shift Key to prevent it from starting.)

Go Start > Run ...in the box type in sfc /scannow ?please take note of the space between the sfc and the /.

This is the System File Checker...it will scan all the Windows? core system files to ensure that they are in their respective correct places, and if not replace them from the CD.

During the scan you may be asked to Insert the CD, if this happens just go retry and let it do its thing.

One important point: While sfc is running, it is not advisable to do any other work, or have any browsers/programs running on the computer, until the scan is complete. (This process will generally take around 45-65 minutes to complete).

Once finished, remove the CD and reboot your machine.

Please post back with the result, or if there are any further queries/concerns.

Kind Regards,

Read other 3 answers

In the past 2 weeks my apps were taking an unusually longer time than usual to load ( 15 seconds instead of the 2 - 3 seconds I'm accustomed to ). I ran Avast , M'soft Antispyware , Ewido , Ad Aware , Defragged , Error checked , Disk Cleanup, with no results , so decided to try a Win. Repair using the CD, only to get the message " Setup cannot continue because the version on your computer is newer than the version on the CD"

I'm using a Dell Latitude Pentium II l'top, with 363 MHz, 20 GB h'drive / 192 MB RAM / Win XP Home Edition 2002 ( OEM Plus Product Recovery CD ) / SP 2.
The h'drive was upgraded to 20 GB's from 10 , in 2003 using the new OEM CD( supplied with the purchase of the h'drive ), and since then I've loaded SP2, IE 6, and some other Win security patches and was working fine till the apps started loading slow. Have the upgrades anything to do with this and can you offer any advice including if a " repair" is somehow possible ? Would it do the trick , and if so how to go about the repair ?



A:Repairing Win XP Home

Read other 14 answers

My daughter-in-law just called and told me her laptop fails to power up. I haven't looked at it yet. She is bringing it over tomorrow. I have built and repaired my own and other family members desktop computers for quite some time and feel comfortable working with them. However, I have never in my life even owned a laptop computer. The one she owns is a Compaq Presario F756NR. They don't have a lot of money and I told her I would do some research on the internet and see if I can figure out how to troubleshoot this unit. I am not looking for specific info right now, as I haven't looked at the unit yet. Anyone have a website I might go look at to get a good idea where to start with disassembling this thing and troubleshooting? I wish it were a desktop. Thanks.

A:New to repairing Laptops

Read other 12 answers

Hey, I have a problem with startup repair as when i select the option to repair, it loads up the normal windows login page, then only displays other user and asks for a username and password i tried my username and password but it states the domain does not exist or could not be connected and i need to do a full destructive recovery,

Any help greatly appreciated thanks.

A:Repairing Windows

and welcome to the Forum

What brand and model, is the PC?

Read other 3 answers

I would just like to know the best home remedies for repairing CD scratches. So far I have been told that toothpaste, car wax, and wood polish are good. Has anyone tried these? Did it work? Which one works best?

A:Repairing CD Scratches.

Read other 15 answers

I had a total crash that even changed some BIOS settings ie. enabling voice after post and changing date (by five years). There appears to be a missing or corrupted file. I have tried to boot up in SAFE mode and when it lists the files it't loading it just stops midway. When I attempt to repair the OS by using the installation disc it cannot see my hard drives. I have three Seagate SCSI drives and an Adaptec card. I thought the installation disc installed generic drivers. Help!
Thanks, Chad

A:Repairing Old Installation

changing date (by five years)that's the first clue, your bios is 5 years old, so is your cmos battery, time for a new oneafter getting that sorted you have to enter setup defaults, set the the time and make adjustments to the bios, ie boot priority etcthen you might even need a floppy disk with your controller drivers if the windows cd can't see the controller and drives

Read other 9 answers

I have tried to what to do to fix this issue. (Let me start by saying that my computer knowledge is probably not as good as most people in here). Everytime I start my computer I need to repair my IP address in order to get connectivity. My operating system is Windows xp. But once I do repair it, it works. There has to be a way for me to be able to turn on my computer and not have to do this everytime. No other computer in the house has this issue, please someone help...

A:Always repairing IP address

Open up the command prompt and type IPCONFIG /ALL and note down:
IP Address, Subnet Mask, Default Gateway and DNS Servers.

Open Network Connections, open Properties of the Local Area Connection, open properties of TCP/IP and change entries to manual and enter values you noted down above in the correct boxes. No need to reboot.

Read other 1 answers

Hey guys!
I seem to be having some issues with my .dll files in my system32 folder - everytime i try to install something or try to run some programs (new or old) it comes back to something being wrong with a .dll file.
is there any way i can repair them at all?
i've tried running sfc /scannow with my XP cd but that didn't seem to work
i dont want to download any of those ".dll Repairers" from websites because half of them are probably filled with spyware - or if there is one that you know of i would appreciate it.
Thanks again guys! =)

A:Repairing .dll File

Some of these are within Windows and some are in the individual programs.

Which one/s are a problem?

Read other 3 answers