Over 1 million tech questions and answers.

Failed install windows7 home to windows7 enterprise

Q: Failed install windows7 home to windows7 enterprise

I have an HP Compaq dx2000mt desktop that has windows7 32bit enterprise installed on it. I tried to install windows7 home 32bit to replace the enterprise OS. As I was installing it stated the old OS would be marked, XXX.old and it went forward, then came to a point where there were booting errors. and it stopped installing. Now I am left with a half install, and a full OS the boot section now in its own drive named disk 0 system reserved.
I partioned the C drive and allocated 20gb and tried to install there. I received the same errors seems that my boot.ini is stuck in the system reserved and I cant figure out how to incorporate disk 0 over to disk C, so that my boot is in the same disk drive.
I have really messed this one up. I have installed an operating system before and never had so much trouble.
Any advice would be helpful.
And please if you have an answer, something for me to do, it needs to be A.B.C.'d out step by step as Im not an expert. But I guess I already proved that...
Thank you in advance.
Katz

RELEVANCY SCORE 200
Preferred Solution: Failed install windows7 home to windows7 enterprise

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Failed install windows7 home to windows7 enterprise

Clean Install Windows 7

Read other 9 answers
RELEVANCY SCORE 93.2

HI all, since replacing my  HD, windows 7 worked perfectly for about 3 months then suddenly  flagged that windows is not genuine, also i am unable to install windows7 SP1, all details below and thanks
in advance for any  help




I am unable to install windows 7 SP1, i have downloaded it numerous times but it  always fails to install
Windows 7 Service Pack 1 (KB976932)
Installation date: ?2019/?07/?01 03:10 PM
Installation status: Failed
Error details: Code 80070017


Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 50
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-76HMH-M4RKY-V4HX6
Windows Product Key Hash: CegQyzk5Zd0qxFdtmueCy9UmviY=
Windows Product ID: 00371-OEM-8992671-00013
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7600.2.00010100.0.0.048
ID: {71B94676-A10A-433B-9FA8-73226A24FB25}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7600.win7_gdr.110408-1633
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaT... Read more

Read other answers
RELEVANCY SCORE 93.2

I had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel
Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that windows is unable to install to "thuis systems hardware" I have tried everything I know and was suggested via tech support.. Any ideas(besides buying a recovery CD or new OS) please help ASAP. Have college work due end of week.

And now its saying hardisk failure and bios is not recognizing my HDD..

A:Windows Failed Install after (Windows7) system recovery.

if bios is not recognising hdd it could either be a problem with drivers or your hdd is "fried"

Read other 2 answers
RELEVANCY SCORE 92

Hello Forum,

I have a laptop Lenovo which is somewhat old. I had to disc wipe my drive and do a
clean windows7 Home Premium install. The install west smooth and I plugged my
cat5 cable in and went to the update screen. For some unknown reason Microsoft updates will not
download. I activated my install and Microsoft advised it was a legal install. My question is: What
do I do now coach ??

Sincerely,

John

A:Windows7 Home Premium Install

Does your installation has SP1?
If not, it's the fist thing to download and install.

For the updates MS releases SP2 for Windows 7

Read other 1 answers
RELEVANCY SCORE 92

I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.

When I am trying to load windows into it I get the error

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu

The Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)

I have a InsydeH2O Setup Utility
Inside the BIOS the options available to me are:-

**Main**
->System Time
->System Date
->Diagonistic Log

**Security**
->Administrator Password <clear>
->Power-On Password <clear>

**Diagonistics**
->Primary Hard Disk Self Test
->Memory Test

**System Configuration**
->language <English>
->Processor C6 states <Enabled>
->Fan always on <enabled>
->Boot Options->

**Exit**

**No other options other than this are available to me in the bios**
Note:- In the BIOS Reverting back to Defaults did not work. I have already tried that

Please could you help me repair my laptop.

A:New Hard disk recognized by Windows7 but not by BIOS, install failed

8+ hrs and lots of viewers, but no answers...

giving it a bump here

Read other 1 answers
RELEVANCY SCORE 91.2

Hi
As i am installing a fresh copy of windows 7 , but it is taking a long time to boot. After selecting the drive for OS than the it moving very very slow in installation & expanding the file . Why this problem, is this problem the laptop are with OS

A:Unable to install Windows7 Home Basic 64-bit

You didn't say why you were installing a fresh copy, but if it because Windows has slowed down to a crawl on your PC, that's a strong indication of drive hardware failure -- and if that is the case, installing a fresh copy is not going to help at all.

Read other 1 answers
RELEVANCY SCORE 87.2

Hello,

Just wondered if there is a way to downgrade from enterprise to ultimate ?

I have tried using microsoft downgrader but I have the following error

Access to the registry key
"HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\Current Version" is denied.

any help/advice would be appreciated.

Thanks,

Sam

A:Downgrade from windows7 enterprise to Ultimate?

Same product, but afaik, no up/downgrade path. Different licensing system.

Read other 1 answers
RELEVANCY SCORE 86.4

My one of the fixed hard drive has bitlocked encryption and I have lost the password. How can I unlock it to recover the data.
Can somebody suggest automatic step by step guide please Thanks.

A:Windows7 Enterprise SP1 32-bit OS - Bitlocker fixed drive

You need Microsoft experts to solve this issue not networking which is why I have moved your post here.

Read other 2 answers
RELEVANCY SCORE 85.6

My pc came with preinstalled Windows 7 x32, later I came to know it is an OEM version.. now i want to switch to x64 architecture(same Windows edition), ..can I do a clean install Windows 7 x64 (retail) over my Windows 7 x32bit(OEM)....and use my OEM product key to activate it?

A:Windows7 32bit OEM Productkey to activate Windows7 retail x64bit

Simple answer is yes.
You will probably need to use telephone activation to get it activated.

Read other 1 answers
RELEVANCY SCORE 85.2

Hello:

While dual booting, I often check my email while in Windows 7 and have noted the inappropriately designed interface.
It is a nightmare trying to access the email because the whole interface is out of wack.
For this reason, I am interested in finding a replacement. I.e., would it be compatible with Vista Live Mail, and hopefully replacing this whacky program.

Therefore, I am seeking feedback about how to go about doing this, and is hoping that someone out there can shed some light as to the feasibility of doing this successfully.
If you can share any input, please let me know.
Thanks in advance for your time and consideration.

Regards,
perdue112

A:Can Vista Mail Work in Windows7 Enterprise edition?

Welocme,

I use WLM on Windows 7 and I like it. It is similiar to windows mail.

It comes as part of the windows essentials package, but you can pick and choose any component of the package. I chose just Windows Live Mail
All that you have to do is go to this web site and download.

Mail - Windows Live

Read other 1 answers
RELEVANCY SCORE 85.2

Hi all,

I still have the same laptop. I had Windows XP and it was OK to detect a second monitor (the beamer for instance)
Once I changed my system to Windows 7; No recognition at all for a second monitor in the screen resolution properties !!

Any clue , please ?

Best,

A:Windows7 (64 bits; Version: Enterprise) does not detect second monitor

Couple of links here for you:

Work and play better with multiple monitors

Guided Help&#58; Dual monitor setup is easy in Windows 7&#33;

Update a driver for hardware that isn't working properly

You might also want to go to your video card's website and download the latest drivers making sure you choose the 64-bit version.

Read other 1 answers
RELEVANCY SCORE 80

My new computer arrived today with Windows7 64 installed. (happydance)
My old computer has Windows7 32 installed.

Before I start attacking both computers, thought I better ask beforehand or the b/f will 'kill' me

Can I remove the hard drive from the old computer, install it as a 2nd drive in the new computer and be able to access all the data (documents, photos, messages saved in outlook and my favourites etc) on it from the new Windows7 64bit primary drive?

(I wasn't sure which sub-forum to ask this question in, hope in here is OK.)

thanks,
Jane

A:Windows7 64 reading windows7 32 drive?

Hi Jaibird,

A hard disk is not 32-bit or 64-bit and does not depend upon the installed OS.

Yes, in some parts and no in others.
You can access files/folders from the partition Hard Disk (Documents, Photos, Favourites).. But you cannot get the messages saved in outlook.

Be advised that the (Documents, Photos, Favourites) will NOT merge into your current Windows 7 64-Bit.

YBL

Read other 9 answers
RELEVANCY SCORE 79.6

Hello, so Im having problems and hoping to find someone online to help me please. wright now Im typing from live linux bootable USB cos installation of windows 7 failed. (also sorry for speeling errors, its cos I cant setup my keyboard) Problem description> Im having windows 7 setup on USB drive, windows image is the original windows 7 downloaded from microsoft thechnet. usb drive has been reformated so this part must be OK since Im able to boot windows installation from my USB. (I cant use DVD installation media since my laptop has broken DVD rom) NOW, I boot from USB begin clean installation, and first restart occurs, then after restart it says #setting up services# then it says #completing installation# then it installs video driver (I know that since my screen gets blinked) then I get and error window which quickly disapear and laptop shut down. the error message says something like #Windows Setup could not configure Windows on this computer?s hardware.# I thought its HDD error so> Ive set my bios to AHCI, and compatibilitiy (these are only 2 options) but none of them works) Ive done> clean all format fs ntfs ( no quick) to make shore HDD ok but no success then Ive run memory test but no help Ive also try to repair my computer option in installation but it cant detect any porblem. after all when I start my comp blue screen shows up with errors and then just shut down. BUT, 2 days ago when my old windows7 was installed I was flushing my bios downloaded fr... Read more

A:Instaling Windows7 failed during installation.

Hello kiddy,

Might I ask what you did with your old Windows 7 installation?

Also, was there a reason you needed to flash the BIOS? You might consider uplugging the computer, holding down the power button for 10 secs, and pulling out the BIOS battery (google can show you how) to completely reset it, and then try installing again after you put it all back. Only change the AHCI mode in the BIOS (if you want that feature), nothing more, at least for now.

You might also try redownloading (from another computer, perhaps) the installer from microsoft, maybe the one you have now somehow didn't download right?

Are you positive your hardware is able to run Windows 7 (I know, you had it installed before), smoothly? Also, is it all in working order? You might consider removing non-essential devices such as excessory cards and HDDs during installation.

Read other 6 answers
RELEVANCY SCORE 78.8

Hello,

I have problems with updating the BIOS of my Tecra R10J. The current version is 1.4, and I want to update it to 3.0, so i have downloaded from Toshiba web site the correct file named "P006Cv300.exe" released from 11/04/2009. This is a BIOS update ONLINE into a real session of Windows 7. Simply, right click the compress exe, click run as admin and that's all but ......... for me it said :
*"[Error] The starting of service was aborted. User does not have administrator privileges"*

see below :
http://perso.orange.fr/100mo/bioserror.jpg

I've tried it with :
- closed AV, Firewall, etc ...
- disable UAC
- Run as administrator
- Tried with an another admin account
- Safe mode (bios update does not support safe mode)
- direct local administrator session

No change. Still the message "User does not have administrator privileges".
Need help please, found nothing on Google (similar Bios problem but not solved !!!!!)

Thank you

A:Update BIOS Failed on Tecra R10 with Windows7

Did you install Win7 yourself?

I believe you need to install the Toshiba Value Added Package, so the BIOS file can read the system details properly.


ps. Did you install 32bit or 64bit?

Read other 8 answers
RELEVANCY SCORE 77.2

i downloaded windows7 recovery by mistake.  I would like to downloadwindows7 home premium

A:windows7 home premium

Please see:
Download Windows 7 Disc Images (ISO Files)Carey Frisch

Read other 2 answers
RELEVANCY SCORE 77.2

hi im new too this forum last week i installed windows 7 home premium 32 bit on my desktop pc it keeps asking me too install updates please restart pc ive got it set too install updates automatically is this normally what happen with new OS thank you

A:windows7 home premium

Yes, it is.

Some updates can only be configured by restarting your computer and it's best to do so when prompted.

If you find it bothersome you can disable automatic updating and choose when and how you download them

Read other 7 answers
RELEVANCY SCORE 77.2

I'm planning ahead so I'll be ready to set up my home network as soon as I get my new desktop. Currently I have a pc with xp and I have a linksys router with a modem Verizon set me. Everything works for the pc and laptop in the home. I had a friend set all of this network stuff a couple years ago and want to try it myself when I get the new pc.

So, my first question is this: Does WIndows7 have an automatic network setup that will take place when I boot up the new pc the first time? Second question: I've heard the Cisco Valet router does everything automatically to setup the network.
Lots of other questions, but I"ll start with these two. thanks for any advice that you can give me
 

A:New pc w/ windows7 - best way to set up home network

Read other 9 answers
RELEVANCY SCORE 76.4

Hi all,

Hoping I can find a solution to my problem here as I have been googling with no luck. I am currently using an Acer Aspire 5733.
It came with 4GB of RAM already installed (One 4GB DDR3) and had a slot to upgrade. I have put in another 4GB stick, but in my System specs, it is still only showing as 4GB (see attached screen). Just wondering, should it work straight away, or is there a setting I need to change at all?

Many Thanks in advance for any help

A:RAM issue on Windows7 Home Premium

It should be recognized right away. The first thing is the ram sticks. While it can be done, you'll have less potential for problems if both sticks are bought as a package or at least the same make and model number. But, that does not seem to be the problem. I would go back and re-seat both sticks of ram to make sure they are properly installed. Then go into bios and see how much ram it sees.

Read other 8 answers
RELEVANCY SCORE 76.4

I reinstalled windows back in 2014 because something wasn't right. I don't know if anything was wrong but it was behaving oddly so I decided to reinstall from the hidden partition. As
soon as it was complete I made 5 recovery disks. Three weeks or so ago I noticed my cooling fan spike in revolutions, very fast. I immediately switched to Task Mgr. to find explorer.exe at 3,605,343K(Process tab,
memory private working set) it usually runs at a max of 22,000K. Because I am not able to let things go, I did some exploring of my own. In event viewer I had 238 warning events where processes had leaked registry handles from user S-1-5-21. FBAgent.exe was
involved in 229 of them along with winlogon.exe, and a couple of others I can't find the names to right now. They were then accessing things like root certificates, my certificates, passwords, verifications, etc. I try to go to microsoft.com at my browser
says my AV won't let me do so because it isn't a secure site. The certificates don't match. That happened at almost every site I visited. After that happened, a day or two later, the fan speed kicked up again and this time it was Host process for windows services(netsvcs)
and it is at 5,000,000K. I look to the services tab in TaskMgr and there are 17 services using that one host. Also, all the .dll in the computer are opened and being accessed by something. Haven't figured out what just yet. In resource monitor my HD is at
100-105% and it is host process(netsvcs) either r... Read more

Read other answers
RELEVANCY SCORE 75.6

I have a laptop running Windows7 Home Premium that seems to be infected with the hijacker StopMalwareSite. I have followed the instructions and here is the requested information:

Thanks in advance for any help.

Gary


DDS (Ver_10-03-17.01) - NTFSX64
Run by Jill's at 11:39:50.73 on Sat 08/28/2010
Internet Explorer: 8.0.7600.16385

============== Running Processes ===============


============== Pseudo HJT Report ===============

uStart Page = hxxp://www.ask.com?o=15494&l=dis
uDefault_Page_URL = hxxp://homepage.acer.com/rdr.aspx?b=ACAW&l=0409&m=aspire_5517&r=273612097225l03e4z145t4802y498
mDefault_Page_URL = hxxp://www.yahoo.com
mStart Page = hxxp://www.yahoo.com
mLocal Page = c:\windows\syswow64\blank.htm
uURLSearchHooks: UrlSearchHook Class: {00000000-6e41-4fd3-8538-502f5495e5fc} - c:\program files (x86)\ask.com\GenericAskToolbar.dll
uURLSearchHooks: Zynga Toolbar: {7b13ec3e-999a-4b70-b9cb-2617b8323822} - c:\program files (x86)\zynga\tbZyng.dll
mURLSearchHooks: Zynga Toolbar: {7b13ec3e-999a-4b70-b9cb-2617b8323822} - c:\program files (x86)\zynga\tbZyng.dll
BHO: &Yahoo! Toolbar Helper: {02478d38-c3f9-4efb-9b51-7695eca05670} - c:\program files (x86)\yahoo!\companion\installs\cpn0\yt.dll
BHO: Adobe PDF Link Helper: {18df081c-e8ad-4283-a596-fa578c2ebdc3} - c:\program files (x86)\common files\adobe\acrobat\activex\AcroIEHelperShim.dll
BHO: Spybot-S&D IE Protection: {53707962-6f74-2d53-2644-206d7942484f} - c:\program files (x86... Read more

A:StopMalwareSite Infected Windows7 Home Premium

As a followup, in case it is helpful. There are several Logon ID's (Users) created on this laptop. Only one seems to be affected with these redirects. Of course that is my wife, who is the primary user of this laptop.

It seems like my UserID was affected, but after running several scans (Avast, SpyBot, MalwareBytes) only hers has "got it".

Thanks

Gary

Read other 13 answers
RELEVANCY SCORE 75.6

I'm sorry, I didn't read the guidelines carefully enough and bumped this request up too quickly - I won't do that again.

Thanks for any help.

Gary


http://www.techsupportforum.com/f100/stopmalwaresite-infected-windows7-home-premium-509862.html

Read other answers
RELEVANCY SCORE 74.8

I recently installed Ubuntu 9 onto a USB HDD and I took out my Windows HDD and put in my old backup HDD and did the install that way now I can either have the linux HDD either plugged into the USB or inside the laptop itself.

I tried to put my Windows HDD into the USB caddy and boot from there and it did not work it got to the splash screen where the four parts of the window comes together then a blue screen of death flashes for a fraction of a second then it restarts the system and it never gets past that point. Is there a way I can get it to work via the USB route? It has nothing to do with the hardware compatibility of USB caddy because my Windows HDD is the original HDD that came with the caddy. I swapped my original drive with that one because it was larger. So is there anyway I can accomplish this without having to reinstall Win7 onto the drive as reinstalling all my software too is a pain in the behind so if that can be avoided then that is what I would like to do.

Thanks

A:How can I install windows7 onto a USB HDD?

You can't install Win7 on an external USB device. What blocks it is the USB controller. The same external or flash drive would work if it is plugged via IDE/SATA cable.

MS tries hard to keep this from being possible as otherwise you could carry WIn7 around in your pocket to any machine.

A few claim they have done it but admit it runs horribly slow.

Read other 5 answers
RELEVANCY SCORE 74.8

I would like to instal a fresh copy of windows7 on my laptop but don't have the disks. However i found the product keys on the bottom of my laptop that i am sure are windows7. now where do i find the disks? if someone could help me i would appreciate it
thanks

A:Trying to install windows7

  
Quote: Originally Posted by fastdrive


I would like to instal a fresh copy of windows7 on my laptop but don't have the disks. However i found the product keys on the bottom of my laptop that i am sure are windows7. now where do i find the disks? if someone could help me i would appreciate it
thanks


Welcome Fastdrive to the windows 7 forums.

It would help to know what kind of laptop you have. You evidently have an oem version of windows 7. Most laptop vendors will send you a set of re-install disks for a small fee. Other people's windows 7 disks most likely will not allow you to install using your laptops product key.

Rich

Read other 2 answers
RELEVANCY SCORE 74.8
A:how to install IE7 on windows7 ???

Sorry it's not possible to install IE7 on Windows 7

Read other 9 answers
RELEVANCY SCORE 74.8

Hi,
Just installed Max Payne 3 on my pc and asap i go to the installed folder gets a death blue screen . Friend told me that i should install SP1 to solve this. So i downloaded [windows6.1-KB976932-X64 (903MB)] and when installing gets error shown below.
Present OS version:
Error: ( i restarted, run as administrative rights and all that i can do, but still...

A:Can't Install windows7 SP1 on PC..Please Help

You may succeed if you first uninstall Max Payne 3 and then install SP1. After that you may again install Max Payne 3.

Read other 6 answers
RELEVANCY SCORE 74.8

Hi i am facing some problems when i tried to install few applications on my laptop which has windows 7 home basic OS installed. i am getting below error.

"an error occurred while trying to rename a file in the destination directory" Acces is denied.

the screen shot is attached.

please help me in this regard.

Thanks.

A:not able to install on windows7

How are you trying to install? Where did the appl come from? What are the appl?

Read other 6 answers
RELEVANCY SCORE 74.8

I am in Thailand and my old Dell 1458 needed service. I contacted Dell (Malaysia) for a service location and the final result was a fried motherboard and Dell accepting no responsibility.  So I went and bought a new Dell  Inspiron 5559 (Why?). Computers here come with either no OS or Ubuntu even though Dell advertises Windows 10. I have the original reinstallation Windows 7 disc from the Dell 1458. Can I use that to install Windows 7 on the new computer? 

A:Install Windows7

No. If your 5559 didn't come with Windows, you can't install it without purchasing a license.

Read other 1 answers
RELEVANCY SCORE 74.8

Hi,
I have this weird problem. I have until now installed a countless number of windows on any given computer but this is the first time I stumble upon this kind of problem. This is an HP laptop infected with a lot of viruses and i can barely turn windows on. That's why I decided I do a format and clean install, but every time I try to boot it from cd it gives me the white blinking line and after a few seconds it continues loading the old version of windows(it's like its not even reading the disc even though I can hear the disc spining) and when i try to boot it from the usb it just keeps displaying the white blinking line. I should mention that I tried both the usb and cd on another computer and they work fine. Thank you
 

A:Can't install windows7

Is the computer set to boot from the disk first in the bios? I am sure that even if you reinstall Win 7 the first copy of Windows will be put into a folder called Windows.old which will mean the viruses will still be there. I would wipe the disk clean before installing Windows again.
 

Read other 3 answers
RELEVANCY SCORE 74.8

I am using an object dock in Windows 7 home basic and I want to hide/remove the icons of mycomputer and recycle bin on my desktop because it is already in the dock.. Unfortunately I don't know how to hide those icons. Please help me. Thanks in advance!

A:hiding desktop icons of windows7 home basic

Go to search, type icons. Then uncheck what you do not want

Read other 2 answers
RELEVANCY SCORE 74.8

I have completely reinstalled my operating system..But except microsoft applications ,when i installed other 3rd party applications, these are installed with unverified publisher..and after laptop restarts.all these applications require uac..some applications also crashes..suppose...vlc media player require uac..and the video files does not start with vlc player..similar problems with other application..i think this may be hardware problem..also when i try to reinstall the application,the applications does not uninstall.i have reinstalled my operating system(windows7 home basic64 bit) somany times yet no resulsts.i think this may be a hardware problem..my lapi model is sony vaio-VPCEH26EN..
Any productive replies with proper solutions is much welcomed....please help.................
Yet the problem wasn't not solved..the actual problem is..
when i installed a software it worked perfectly though it is unverified by publisher..but after laptop restart all non-microsoft installed application asks uac....some software asks this .dll is missing..that dll is missing.
the software .exe application image changed to the attached image ..also applications does not uninstall says eg.for idm internet protocol option has been changed,because internet applications willnot properly communicate in the internet untill reboot..some softawre says C:\Users\kkb350\AppData\Local\Temp\uninstall000.exe not found...what to do now......i use dc++ for sharing..after install i share some files..but... Read more

Read other answers
RELEVANCY SCORE 74.8

Last few weeks my computer is running terrible. Displays are slow to open.I have tried fixes and almost got it 80 percent running. Just listening to wrong guys and inexperience. I also lost my sound and tried driver utility and it failed. I also no longer have extended display in the drop down box in Display.Could be more I had to do F11 3 times and 3 different rsetore points to get this far to talk to you for help.Thanks in advance
Earl
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3893 Mb
Graphics Card: Intel(R) HD Graphics, 1722 Mb
Hard Drives: C: 574 GB (507 GB Free); D: 21 GB (0 GB Free); F: 0 GB (0 GB Free);
Motherboard: Hewlett-Packard, 144B
Antivirus: None
 

A:Hp Home premium windows7 64bit major problems

You may want to make a fresh install of your OS. Backup your documents before doing so.
 

Read other 1 answers
RELEVANCY SCORE 74.8

After re-installing windows 7 64 bit hone prem retail version, I started get the error code 8024402f when updating. I tried every trick and the only one that worked for me was installing "hotspot shield". Once I did that, it would update. But it seemed that it wouldnt update everything liked it did before. Like windows malucious software remover, visual c software, drivers for main components, etc. So I re-installed again, no luck on updates. So installed hotspot again, and updating would work. This time, it installed more updates than before. Once done, I tried uninstalling hotspot, then the error code would pop up again. Any suggestions what to do? Computer was running fine, but wanted to clean it up by starting from the gate again.

My rig, built by myself:

asus m5a97 le r2. Mobo
amd fx 4170 processor
16gb kingston sys mem
600 wattpower source
case with 6 fans (1) 60mm, (4) 80mm, and (1) 120mm
Up to date bios which came with mobo
1tb toshiba 7500rpm harddrive
Evga geforce 650 gtx 2gb superclocked graphics card
windows 7 home prem 64bit retail
norton 360 protection
 

A:update issues after reinstalling windows7 64 bit home prem

uninstall any .net4 entries do not reboot-try updates now
 

Read other 2 answers
RELEVANCY SCORE 74.8

Hello experts ,


I am new to this forum . I bought a laptop sony vio Eserise .I tired too install a software named leap office (I think it might be 32 /16 bit application.See here C-DAC: GIST - Products - LEAP Office 2000).
I can install it without any error . But it shows an error as follows .


Please help me

A:A 32 bit application canot run in windows7 Home basic 64 bit pleas hel

This is a very old program that was designed for Windows 3.1 and Windows 95. It is not Windows 7 compatible.

This is from the FAQ page on the site:

. Does Leap Office work on Windows Vista/Windows 7?
A. No, Leap Office is not tested to work on Windows Vista/Windows 7. Please get in touch with [email protected] for new products

Read other 4 answers
RELEVANCY SCORE 74.8

Hi
I am having problems at start up and with updating windows on my computer

I am running Windows7 Home Premium 64 bit on a Compaq presario CQ61 Notebook

On start up i get a message saying that these 3 programs

jusched.exe
STM3 TrayIcon: E_IATIGCE.EXE
SynTPEnh.exe

cant start because iertutil.dll is missing from your computer. Try reinstalling the program to fix this problem

I have tried looking for this program but have had no luck in finding it

Also when trying to perform any windows updates, it tries to update, but i always get code error - 8007371c
I have looked through the update history and the problem started about 2 weeks ago. i have tried to do a system restore but for some reason it is only showing restore points for the last 24 hours

I have not come across any other problems such as connecting to the internet or accessing any files or documents.

Are these problems connected ?

I would be more than grateful for any help in sorting these problems

Den

A:Start up & Windows7 home premium update problems

Try opening a command prompt and type in SFC /scannow

Read other 4 answers
RELEVANCY SCORE 74

The error when install program on windows7.the windows installer service could not be accessed.the can occur if the windows installer is not correctly installed.

A:Cannot I install program on windows7

This may be of some help.
https://support.microsoft.com/en-us/kb/2642495

Read other 1 answers
RELEVANCY SCORE 74

I had installed IIS on windows 7 local host page is not showing and also when i am going IIS manager in windows 7 when im going to start the service from the right but it showing some error

A:error getting after install of IIS on Windows7

Hi aRafay, Welcome to the forums Have alook at this Microsoft Knowledge article Error 0x80070020 when you try to start a Web site in IIS 7.0 It may answer your question

Read other 4 answers
RELEVANCY SCORE 74

Hello guys

I was trying to install XP in laptop "Acer aspire 2920Z" which is currently running with windows7. every time I press F2 to log in to setup it takes me to a page titled "Phoenix TrustedCore (tm) Setup Utility" and under this title a bule band has 5 categories" information, Main, Security, Boot and Exit, I went to Boot and selected: Boot priority order: and there are 7 titles or options.. I tried all of them for many many times.. even I knew I must selced: CD/DVD: HL-DT-ST DVDRAM GSA-T20N-( did this many many times... but the XP CD never loaded..!!

any options or alternatives to rid of this win7 pls?
I am really in need if a quick reply with lot of thanks indeed,
Regrds
 

A:Solved: How to install XP over windows7 ?

Read other 11 answers
RELEVANCY SCORE 74

My dell laptop came with windows vista when I bought it last year but I was entitled to a free upgrade to windows 7 which I installed without any problem. But a couple of weeks ago my pc crashed and the repair shop reset it back to vista. But when I tried to re install the windows 7 upgrade I just get this error message: 'This installation disc isn't compatible with your version of Windows to upgrade you need the correct installition disc for more information check your computer's system information.to install a new copy of windows restart (boot) your computer using the installation disc and then select custom advance' I tried re booting several times but I just get the same message.
 

A:can't re install windows7 upgrade

Read other 6 answers
RELEVANCY SCORE 74

I've heard that v can run dual softweres like win10 in one half and win7 in other half., so can i go with 6th generation laptop or 7th (hp-au620tx)

A:can i install windows7 on hp-au620tx?

Hi @kavyadm, how do you do ?Welcome to HP Forum ! Check this site with information about the windows dual boot (win 10, 8 and 7):http://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/http://www.pcworld.com/article/3050502/windows/you-can-dual-boot-windows-7-with-windows-10-but-there... I hope that helps !Can I ask you a favor ?If the question is clarified, mark my answer as "resolved" and click on the icon of the "hand" to provide "congratulations" in recognition.Have a nice week !Im a volunteer in the HP Forum !   

Read other 3 answers
RELEVANCY SCORE 74

I am trying to do a clean install Windows7 in place of an existing XP Pro operating system. I have followed Windows Easy - Transfer to & from Computers procedure. All backed up to external drive K - I have tried this once but for some reason instead of installing on the C drive it went to another drive D. I did not see during the installation and options saying the drive to install to. I expect I will need to format D to get rid of it. Having done that is it best to disconnect D so this does not happen again? Should I also switch off the external drive K till the installation is complete?

Help will be greatly appreciated.

A:Windows7 from XP Pro install query

Was your OS installed to d: or is your file transfer defaulting to D: while your os is on the c: ?

Read other 9 answers
RELEVANCY SCORE 74

I deleted everything on my hard drive using a program called WipeDriveWizard.
It seems this program also deleted every driver,therefore there is nothing left.

Now I try to reinstall Windows 7 which works up to the point where
I am asked to Load Drives.
I get message: No drives found.

Question: from where can I get the requested driver ?
It is not on my Window7 DVD nor an the Motherboard Chipset DVD

I appreciate your help

Saturn 3
 

A:Looking for a driver to install Windows7

Read other 9 answers
RELEVANCY SCORE 74

So I tried to upgrade from 7201 to 7229 and I got a black and then went to grey screen, so I had to rollback to 7201, upgrade was a nogo for me, so then this morning I did a fresh install of 7229 and to my surprise it installed in less then 22 minutes. So if the RTM will install in less them 30 minutes I am going to get it as soon as it is out. the install time gets better with every new release.

A:Windows7 RC 7229 install

It is very fast installation. Even from a DVD-R.

Read other 2 answers
RELEVANCY SCORE 74

yes hello to all i have a quick ? is there anywhere i can download windows 7? u see i have a product key but the thing is i dont have a 7 disc.
THANKS IN ADVANCE
RUBEN

A:windows7 fresh install?

You will need to either buy a new disc or find the original disc what came with the key.

There are no legal downloads of Windows 7.

Read other 6 answers
RELEVANCY SCORE 74

Hi there I have a windows 7 64bit and I use Firefox (unfortnely there only 32 bit) . what version of jdk I should install in my PC, 32 or 64 bit?

A:What java install in windows7?

Hi,

This may help answer your question:

http://www.java.com/en/download/faq/java_win64bit.xml

cheers

Dave

Read other 1 answers
RELEVANCY SCORE 74

Am wanting to do fresh install of W7. After placing DVD disc into DVD player and then restarting and pressing Delete key to enter BIOS I get two different choices to boot from DVD. One says DVD and the other says DVD UEFI.

Which one do I pick?
Would both choices ensure I have a bootable OS?
If I install using DVD UEFI choice will that install allow me to clone my OS which I would do with Acronis True Image 2014?
Does my current installation have some way of knowing how my current OS install was done..either DVD or DVD UEFI

My motherboard is an Asus Z87C and the BIOS screen has the words Asus UEFI in top left corner.

I have never done an install of OS so please help as I do not want to do the wrong type of install. Thanks Gary

A:Install Windows7 from DVD or DVD UEFI?

Neither method would be considered wrong. Just choose boot from DVD, let us know what heppens.

Could you please post a shot of Disk Managenent now, before you start.

Disk Management - Post a Screen Capture Image

You do not have to go into the bios to make a choice, just use the 1 time Boot Menu key, ususally F8 then choose boot from dvd drive.

You should really research the subject before even attempting this.

Clean Install Windows 7

Read other 1 answers