Over 1 million tech questions and answers.

BSOD DRIVER POWER STATE FAILURE

Q: BSOD DRIVER POWER STATE FAILURE

BUG CHECK CODE: 0x0000009f
Mbm3DevMt.sys
Mbm3DevMt.sys+6b500
fffff880`08980000
fffff880`089f1000
0x00071000
0x51753a5e
22/04/2013 13:25:50 F3607gw Mobile Broadband Device Management F3607gw Mobile Broadband Device Management Driver V5.30
built by: WinDDK MCCI Corporation C:\Windows\system32\drivers\Mbm3DevMt.sys


ntoskrnl.exe
ntoskrnl.exe+e58d2
fffff800`03c63000
fffff800`04248000
0x005e5000
0x531590fb
04/03/2014 08:38:19 Microsoft? Windows? Operating System NT
Kernel & System 6.1.7601.18409 (win7sp1_gdr.140303-2144)
Microsoft Corporation C:\Windows\system32\ntoskrnl.exe

RELEVANCY SCORE 200
Preferred Solution: BSOD DRIVER POWER STATE FAILURE

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD DRIVER POWER STATE FAILURE

Hi,

Please refer to the following and reply back accordingly with the required information - http://www.techsupportforum.com/foru...ta-452654.html

Read other 5 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

I have windows 8 installed on my home computer. The computer keeps shutting down on it's own and saying "Driver Power State Failure". Can someone look at my BSOD Minidumpfiles and give me an idea of what could be causing this problem. I have tried to save the minidump files into a zip file, but it brings up an error not allowing me to do this. Hopefully the text file from Blue Screen view is enough to figure this out. Thanks. 
==================================================
Dump File : 021413-31262-01.dmp
Crash Time : 2/14/2013 11:00:19 AM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`1c00e600
Parameter 3 : fffff800`49f58920
Parameter 4 : fffffa80`1b38fa00
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+3474
File Description : 
Product Name : 
Company : 
File Version : 
Processor : x64
Crash Address : ntoskrnl.exe+7a040
Stack Address 1 : 
Stack Address 2 : 
Stack Address 3 : 
Computer Name : 
Full Path : C:\Windows\Minidump\021413-31262-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 905,408
Dump File : 021313-22042-01.dmp
Crash Time : 2/13/2013 8:27:48 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00... Read more

A:BSOD - Driver Power State Failure

Hello cap2587,  I'm afraid that BlueScreenView is not very helpful.  If we could gather a little more information about the problem computer, it might prove beneficial in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.Below is ONLY for those who can not get online when running Speccy: Select File --> Save as Text File and save the file to your Desktop.Please copy the text file into your next post.Important Note: You will need to edit the text file to make sure that your Windows Key is not present under Operating System.3. )... Read more

Read other 10 answers
RELEVANCY SCORE 98

Hello at all.

Sometimes when i try to shut down my compuer, it hangs for a little bit and than i get a bsod with the driver power state failure 0x9F.

This is not every time but randomly.

I hope anyone can help!!!

? OS -Windows 7
? x64
? What was original installed OS on system? Windows 7 x64
? Full retail
? Age of system (hardware)- 1 year
? Age of OS installation - have you re-installed the OS? one year, never re installed

? CPU - intel i5 [email protected] 3,4GHz
? Video Card - Nvidia GTX 680
? MotherBoard - Asus P8Z77-V LX
? Power Supply - BeQuiet & 750w

A:BSOD driver power state failure

Hi, and welcome to TSF.

Please navigate to c:\windows\minidump, zip up any minidumps you find and attach to your next post.

I'm not sure what the analysts do in cases like this but the BSOD.zip that you attached contains your perfmon report but its in German. Anything you can do about that from your end?

Read other 6 answers
RELEVANCY SCORE 98

hey
sometimes when i shut down my computer it takes forever to shut down and then i get a BSoD. i attached a zip file with the dumpfiles.
hope you guys can help me
regards kayabrico

A:Driver power state Failure BSoD

Hi,

The attached DMP files are all of the DRIVER_POWER_STATE_FAILURE (9f) bugcheck.

This error occurs if drivers do not handle power state transition requests properly, usually during one of the following procedures: shut down, suspending or resuming from standby, suspending or resuming from hibernation.

IMAGE_NAME: asmthub3.sys

MODULE_NAME: asmthub3

FAULTING_MODULE: fffff88006d73000 asmthub3

Running an !irp on the blocked IRP address (4th parameter of the bugcheck) we get:


Code:

0: kd> !irp fffffa80148ba3c0
Irp is active with 7 stacks 6 is current (= 0xfffffa80148ba5f8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8013d45430 00000000 fffff80002e776f0-fffffa80155be4c0 Success Error Cancel pending
\Driver\asmthub3 nt!IopUnloadSafeCompletion
Ultimately, it appears asmthub3.sys is the culprit here, wh... Read more

Read other 19 answers
RELEVANCY SCORE 98

As the title says, I'm experiencing a Driver Power State Failure BSOD, I'll include informations gathered by the BSOD File Collection Script and Speccy below. I suspect my HDD might be the culprit but I'm not sure.
 
https://dl.dropboxusercontent.com/u/18557414/bsod/BSOD.zip

Edit: Mirror: http://www.mediafire.com/download/el91ery9g4t51na/BSOD.zip
Summary
Operating System
Windows 8 64-bit
CPU
Intel Core i7 3517U @ 1.90GHz 50 °C
Ivy Bridge 22nm Technology
RAM
4,00GB Single-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. K56CM (SOCKET 0) 49 °C
Graphics
Generic PnP Monitor ([email protected])
Intel HD Graphics 4000 (ASUStek Computer Inc)
2048MB NVIDIA GeForce GT 635M (ASUStek Computer Inc) 44 °C
Hard Drives
466GB Hitachi HTS545050A7E380 (SATA) 35 °C
Optical Drives
HUAWEI Mass Storage USB Device
DTSOFT Virtual CdRom Device
MATbleepADVD-RAM
Audio
Realtek High Definition Audio
Operating System
Windows 8 64-bit
Computer type: Notebook
Installation Date: 17.11.2012 00:12:00
Serial Number: *****-*****-*****-*****-*****
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Antivirus
AVG AntiVirus Free Edition 2013
Antivirus Enabled
... Read more

A:Driver Power State Failure BSOD

to the Bleeping Computer forum.
 
 
Your issue seems to be probably caused by outdated storage controller driver.

BugCheck 9F, {3, fffffa800470c060, fffff88002f017f0, fffffa80046e8870}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys
Please try the below steps.
 
Update Chipset driver.
 
1. If there is Intel Rapid Storage Technology driver installed in your system, please uninstall it completely first.
 
2. Download and install latest chipset driver from the below link.
 
    https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/20775/eng/infinst_autol.exe&lang=eng&Dwnldid=20775
 
Change power power plan to high performance.
 
Please read the excellent guide from below link and make sure power plan is set to "High performance". 
 
http://www.eightforums.com/tutorials/5464-power-plan-settings-change-windows-8-a.html
 
This will prevent core system components to enter in to power saving mode. Extreme power saving options are meant for portable computers and absolutely not necessary in a desktop machine.

Read other 5 answers
RELEVANCY SCORE 98

I have been getting this random BSOD from time to time. I'm using a laptop and I'm not sure how and when this started. Occurs when the charger is either plugged or unplugged. Any help will be appreciated. Thanks

A:BSOD Driver power state failure

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 4 answers
RELEVANCY SCORE 98

I've had the same BSOD twice now whilst playing Call Of Duty - Modern Warefare 3. The game freezes then the BSOD appears.

I have also attached the 2 minidumps

? OS - Windows 7 Ultimate Service Pack 1
? x86 x64 ?
? What was original installed OS on system? Windows 7 Ultimate
? OS - Full retail version
? Age of system (hardware) - 3 Years
? Age of OS installation - Approx 1-2 Months old

? CPU - Intel Core 2 Quad Q6600 @ 2.4GHz
? Video Card - HIS ATI 5850
? MotherBoard - Asus P5K Deluxe WiFi
? Power Supply - 600W SEASONIC M12-600 Modular

? System Manufacturer - Self Build

A:BSOD - Driver Power State Failure

Perfmon reports an issue with a PS2 keyboard. If you're using a USB keyboard, it's safe to ignore this message.

You have 2 different wired network controllers (Realtek and Marvell). Why is this? Why isn't the Marvell device either removed from your system or disabled in the BIOS?

You have a Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
Win7 doesn't like these devices, and will Blue Screen in a heartbeat if you use older drivers. Here's my rant on these devices:

Quote:




I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.




MSINFO32 points to disk issues and cites your jraid.sys (RAID) drivers (as does both memory dumps). Please:
- run hardware diagnostics on all hard drives: HD Diagnostic (read the details at the link) - Test ALL of the hard drives.
- update the RAID drivers (if they are the most current version - uninstall them, then install a fresh copy).
- check the RAID array for problems (I don't have much knowledge about RAID - try over in the Hardware Forums).

The Asus P5 series of mobo's has some issues with memory settings/timings/voltag... Read more

Read other 13 answers
RELEVANCY SCORE 98

In the last couple of months, my laptop occasionally crashes while it is shutting down - it would be "Shutting Down" for 5-10 minutes - longer than usual. Then, there would be a BSOD, sometimes labelled "Driver Power State Failure". Then, it would reboot by itself.

Attached is the output from the DM Log Collector.

Please help.

A:BSOD Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8008244e10, fffff80000b9a4d8, fffffa8007f54b30}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa8007f54b30
Irp is active with 4 stacks 3 is current (= 0xfffffa8007f54c90)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa8007693050 00000000 fffff80003119210-fffffa8003fc2010 Success Error Cancel pending
\Driver\vwifimp nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8003fc2010

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm vwifibus
start end module name
fffff880`056d6000 fffff880`056e3000 vwifibus (pdb symbols) c:\symcache\v... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello,

So recently, I got driver power state failure BSOD and I decided to refresh my laptop. I already updated my windows 8 but the problem still persist. I also noticed that some update fail to install when I restart my laptop. After that, everytime I turn on my laptop, my laptop freeze about 3 minute and then work normally. But if I shut down my laptop, it started to restart, but then after that I can shut down normally.

My .dmp file is attached below. Thank you for your help!

A:BSOD driver power state failure

Hi ardikur,

Welcome to the 8forums.

I see you have KMSpico, for what have you used KMSpico?

Read other 3 answers
RELEVANCY SCORE 98

Hi,

My laptop has been having the following issue:

Sometimes when I put my laptop into hibernate it experiences a blue screen of death and states that the problem is due to a driver power failure.

I have a:

Dell 1745
500GB HDD
4GB RAM
Intel Core2 Duo CPU P7450 @ 2.13GHz

Windows gives me the following information on the error:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8003C9D060
BCP3: FFFFF80004BA84D8
BCP4: FFFFFA80049AFB80
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Also find the attached dump file.

Thank you for any assistance.

A:BSOD Driver power state failure

Welcome Jack, please follow the Blue Screen of Death (BSOD) Posting Instructions .
The dump file uploaded is a 0x9F which is DRIVER POWER STATE FAILURE that happens in
transitions between power states most commonly S0 (ON state) > S3 (Sleep state)
or vice-verse. You can read more HERE.

The most common cause is a device driver but sometimes it's the hardware itself
that is at fault.


Code:
BugCheck 9F, {3, fffffa8003c9d060, fffff80004ba84d8, fffffa80049afb80}

Probably caused by : pci.sys ◄//Being falsely accused.

Code:
!irp fffffa80049afb80
Irp is active with 4 stacks 3 is current (= 0xfffffa80049afce0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa800766d050 00000000 fffff80002ecb200-fffffa80092ac010 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\netw5v64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for netw5v64.sys ◄//The actual culprit.
*** ERROR: Module load completed but symbols could not be loaded for netw5v64.sys
\Driver\netw5v64 nt!PopSystemIrpCompletion
Not surprisingly the driver is very very old!

Code:
lmvm netw5v64
start end module name
fffff880`0604a000 fffff880`06585000 netw5v64 T (no symbols)
Loaded symbol image ... Read more

Read other 8 answers
RELEVANCY SCORE 98

Wondering if anyone can help....

I bought this laptop back in January, and have had this problem, almost as long as I have had the computer. I have zipped up the reports another thread said to zip up and attach. Any help with fixing this problem is extremely appreciated!

System Info:

Toshiba P505-S8980
Running Windows 7 - Home premium if I am correct.

This is getting aggravating, as I use it as a mobile DJ, it hasn't happened on a gig yet, thankfully, but do not want to take a chance of it happening!

Thank you for any help!

A:BSOD - Power Driver State Failure

Files needed are attched to this message!

Read other 2 answers
RELEVANCY SCORE 98

Hi

I getting this error when I try and shutdown my laptop, will not shutdown and after a couple of minutes it comes up with the above error.

Attached is the information from the SF Diagnostic Tool.

Any help would be appreciated.

Thanks
Jamie

A:BSOD - Driver Power State Failure

Just an update, I am been trying and few things out but I just brought a new monitor Acer T232HL touch screen. It is connected via and HDMI port and needs a usb connection in order to use the touch function. If I disconnect the monitor the problems seems to go away and can shutdown as normal.

Not sure if that's any use

Read other 6 answers
RELEVANCY SCORE 98

Hi All

Being the non-technical, geekless person I am, I would certainly very much appreciate your assistance in ascertaining why I have just experienced a BSOD during Shutdown which took over half-an-hour.

My Windows 7 Ultimate x64 was working perfectly up until now and I am at a total loss as to why this has occurred.

I have attached a Crash Report courtesy of NirSoft's BlueScreenView software program.

Thank you in advance for your assistance with this matter.

Warmest Regards

Neil (Mr Smiley)

A:BSOD-Driver Power State Failure-Please Help

According to what you attached in the screenshot, it appears that one of your services failed to stop or shut down, causing the system to go in to a infinite loop that tried to kill that process.

It is just a one time event or does it happen often?

Read other 5 answers
RELEVANCY SCORE 98

Hello,

I'm brand new to the forums. Usually I'm able to sort my own computer problems (with the help of good ol' Google). However I've been stuck with this for some time now. BSOD, Driver_power_state_failure. I can't really pin point a particular time this happens I'm afraid. I built this PC myself (my first one) about 7-8 months ago(?) and haven't really had any problems.

So far, I've reinstalled windows and updated all my drivers as recommended from many Google searches but I am still getting the same BSOD and frankly if I can't find the answer via Google I'm pretty much buggered . After reading the posting instructions I've used the diagnostic tool, so I'll attach the zip.

Any help or advice would be most welcome and appreciated.

Thanks very much guys.

Steve

A:BSOD - Driver power state failure

Vayzaroth,

Welcome to SevenForums.

Help us to help you by carrying out the following:
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the ?Other Info? block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.
===================================================
thanks
karl

Read other 9 answers
RELEVANCY SCORE 98

Hi everyone

I was getting alot of bluescreens and didnt need anything on my computer so have just reformatted this machine - However I am still getting some problems.

(Which makes it a hardware problem I assume)

However I do no know exactly what is wrong ?

Hope someone could please point me in the correct direction

Thanks alot!!

P.S this is another machine from my profile stats

Intel Core 2 Dual E6750 @ 2.66Ghz
500GB / 6GB DDR2 Ram
Radeon HD 6850
Asus P5KR motherboard

A:BSOD - Driver Power State Failure

Code:
BIOS Version/Date American Megatrends Inc. 0703, 26/06/2008
Please see if an updated BIOS is available for your PC.

Code:
0: kd> lmvm atikmpag
start end module name
fffff880`03a00000 fffff880`03aa0000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Sat Dec 07 06:51:45 2013 (52A231D9)
CheckSum: 0009FEFF
ImageSize: 000A0000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please check the AMD site to see if an updated driver is available for your Radeon card.

Uninstall Avast - its a known cause of BSOD's - replace it with MSE.

Read other 3 answers
RELEVANCY SCORE 98

My laptop has been having issues with sleep, hibernate, shutdown, etc... On all of these functions it shuts down the graphics, turns off the speakers and wifi, and then just hangs without shutting down. Every now and then it will work properly for a few days and then go back to giving me grief.

The BSOD error is relatively new, maybe for the last two to three weeks. I've only noticed it when the computer is trying to go into sleep mode.

I have attached the results of the Sf Diagnostic Tool.

Thank you in advance for your help.

A:BSOD Driver Power State Failure

Bump

Read other 1 answers
RELEVANCY SCORE 98

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hey!

I got a Driver State Power Failure yesterday after Windows 7 took ages to shut down. I have also noticed that of late my monitor wouldn't come out of standby mode when i switch on my PC no error beeps or anything just wouldn't come out of standby mode when i start it, not sure if the issues are related.

I am attaching the minidump file as well the error message I got when i rebooted into Windows 7. Would appreciate any help. Thanks so much!

A:Driver State Power Failure BSOD

Anyone?

Read other 2 answers
RELEVANCY SCORE 98

I performed a clean install of Win 8 x64 from Win 7 x86. I have had freezes or bsods at the Metro screen if the computer sits unattended for awhile or goes to sleep. I have updated the BIOS to the latest version, am running defaults and not overclocked. I think it is a driver issue but I cant seem to track it down. Any thoughts?

A:BSOD Driver Power State Failure (Win 8 x64)

bump? If more information is needed let me know. Thanks. If it's general incompatibility with a piece of hardware I may just go back to Win 7.

Read other 3 answers
RELEVANCY SCORE 98

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 98

I'm getting daily BSOD failures, and was finally able to get some of the information. I've attached the zip file and hopefully someone can tell me what i need to do to remedy this. I've included as much information as i can find in my profile.

A:BSOD Driver Power State Failure

In your files, I only found 2 dump files, about a month apart. If you are having daily BSODs, please be sure your computer is configured to create small memory dumps. this will help you Dump Files - Configure Windows to Create on BSOD Pleas use the steps listed to create small memory dumps.

The first dump was on 5-9


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff800034c45da, fffff88003968fa8, fffff88003968800}
Probably caused by : memory_corruption ( nt!MiGetNextNode+2e )
Followup: MachineOwner
The second dump was in July of 2012 So really is of little importance at this point. However, I would suggest you update your Nvidia driver to the latest WHQL version I would also use this method to insure you get a clean install. NVIDIA Drivers - Avoid Problems

I would also, after doing the above like you to Open a elevated command prompt ( click start, type cmd in the search box, right click on the cmd entry and select run as administrator) in the black box that opens, copy/paste sfc /scannow. If you decide to type it, noti... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hello forum. My wife has a Dell Inspiron 15r 5010. Win 7 Home Premium x64. Yesterday she had a BSOD. I have followed your posting guidelines and hope that I have everything attached that you will need. She will go nuts if she isnt able to play her games lol Thank you in advance for your time and suggestions.

A:Driver Power State Failure BSOD

One of the most clear cut crash dumps I have ever seen.

Code:
FAULTING_MODULE: fffff8800aacc000 tap0901
It is used by two things. Comodo, and some VPN clients.

If you have (a glance at your system says that you have) such programs installed, uninstall them and see how it goes.

Let us know the result.

Read other 5 answers
RELEVANCY SCORE 98

Hey all! I'm new here and hoping you might be able to help me with my BSOD! I'm getting a Driver Power State Failure. It's strange, the computer starts to lag (the mouse pointer starts to get sticky) then eventually it will hang. Only happens when I first boot the machine in the morning then its usually okay after an immediate restart. But it does seem to happen daily.

I've run the memory test & hdd tests as suggested in the sticky and they run fine without error. I have attached the files as requested along with a minidump from the BSOD. The information also requested in the sticky is below:

? OS - Windows 7 SP1
? x64
? Nothing preinstalled - I built it
? OS OEM bought alongside hardware
? Age of system - about 3 months
? Age of OS installation - 2 months (reinstalled OS once to try and repair this issue)

? CPU - Intel i7 2600K (Clocked at 4.2Ghz)
? Video Card - Nvidia GTX280
? MotherBoard - Asus Maximus IV Gene Z
? Power Supply - Tagan TG800-BZ 800W
? Corsair 160Gb SSD
? WD 500Gb HDD

? System Manufacturer: Me

Hope you can help!

Many thanks.

A:BSOD - Driver Power State Failure

Edit: wrong thread. Whoops!

Read other 5 answers
RELEVANCY SCORE 98

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 98

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 98

info taken from Speccy.


Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz 41 ?C
Sandy Bridge 32nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 824MHz (8-8-8-24)
Motherboard
ASUSTeK Computer INC. P8Z68-V PRO (LGA1155) 60 ?C
Graphics
BenQ G2420HD ([email protected])
1280MB GeForce GTX 570 (ASUStek Computer Inc) 36 ?C
Hard Drives
125GB M4-CT128 M4SSD2 SCSI Disk Device (SATA-SSD)
977GB Western Digital WDC WD10 02FAEX-00Z3A0 SCSI Disk Device (SATA) 39 ?C
Optical Drives
ASUS DRW-24B3ST ATA Device
ELBY CLONEDRIVE SCSI CdRom Device
Audio
Realtek High Definition Audio

Power
Corsair HX 650 professional series (650 Watt)

home built PC my brother and I made it first time home build. My brothers PC is identical except for his case, and he hasn't had any problems

My computer Randomly blue screens with DRIVER STATE POWER FAILURE, but it doesn't create a minidump in my windows folder.

I tried running verifier but it seemed like nothing happened I followed all the steps but after reboot windows just started up normally like nothing happened, I ran a query and it a command prompt popped up for 1 second then disappeared before i could read anything.

I looked at your thread on forcing a mini dump, but unfortunately i got a bit confused by the lingo and gave up ...

I really appreciate any help as It's incredibly frustrating not knowing why my new shiny powerful computer is crashing.

i've attached t... Read more

A:Driver Power State Failure BSOD

Verifier won't necessarily pop up a BSOD immediately on reboot - it depends on what the offending driver is doing as to when it'll BSOD.

First off, here's the info that I have on SSD's:

Quote:




There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard)
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to swtich controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm... Read more

Read other 5 answers
RELEVANCY SCORE 98

? OS - Windows 7
? x64
? What was original installed OS on system? Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? MSDNAA through uni
? Age of system (hardware) - 18months..
? Age of OS installation - have you re-installed the OS? A week or so.. I did a complete fresh reinstall of Windows 7
? CPU - AMD Turion(tm) X2 Dual-Core Mobile RM-70
? Video Card - ATI Mobility Radeon HD 3400 Series

Blue screen received generally using standby, code 9f.

I tried using the 'verifier' tool but wasnt able to generate a blue screen. The display went black, yet the fan just kept on roaring..

I have tried updating the Atheros driver, as WinDbg was hinting that this was the cause, but without success.

Any help is greatly appreciated
Cheers

A:BSOD - 9f - Driver Power State Failure

Hi -

As the thread title states, the bugcheck on both dumps -

0x9f (0x3,,,) = driver in an inconsistant power state and blocking an IRP for too long a time. Probable cause is Atheros.

Are you running ESET ESS w/ firewall or just NOD32 anti-virus? I see you have ESET newest version v 4.2.40.0, so installation must have been recent. When exactly and do you know if BSODs began before or after new ESET install?

I usually find 3rd party firewalls involved in 0x9f (0x3,,,) BSODs. I myself run NOD32 a/v only on this particular system - not ESS.

Run the Driver Verifier --> http://jcgriff2.com/Driver_Verifier.htm

What is exact model of HP dv5? Look on bottom label. There are numbers after dv5-xxxx. Is HP support where you got the Atheros wifi driver update?

Regards. . .

jcgriff2

.

BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun 10 22:04:06.702 2010 (GMT-4)
System Uptime: 0 days 0:11:58.495
BugCheck 9F, {3, fffffa800226a060, fffff80004089518, fffffa8005d10a70}
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Thu Jun 10 06:50:41.607 2010 (GMT-4)
System Upti... Read more

Read other 5 answers
RELEVANCY SCORE 98

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver power state Failure BSoD

  
Quote: Originally Posted by wolfinhu


Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???



Hi and welcome

these crashes were caused by nvm62x64.sys part of your nvidia fforce hardware firewall.

I would remove it to test and put something else back later

Let us know if you need help

Ken

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\New folder (3)\030910-24507-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02817000 PsLoadedModuleList = 0xfffff800`02a54e50
Debug session time: Tue Mar 9 00:23:34.636 2010 (GMT-4)
System Uptime: 0 days 23:09:45.039
Loading Kernel Symbols
...............................................................
.... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???

A:Driver Power State Failure BSOD

  
Quote: Originally Posted by wolfinhu


Hi, my computer is being shutdown a few times with the Blue Screen and I have no idea what's going on. I have the Windows 7 and suposedly I have no hardware problem and/or compatibility but I have been reading the posts and I don't know what to do. So I have uploaded the DUMP files so you guys can give me a help. What should I do???



These crashes were probably caused by your nvidia network driver nvmf6264.sys

I would download and install a fresh copy
I would also run a system file check
(to do that type cmd in search>right click and run as admin>sfc /scannow) note the space between sfc and "/")

Let us know if you need help with this

Ken

Read other 2 answers
RELEVANCY SCORE 98

I've searched the forums and this seems to be a common bsod but varying in drivers that need to be updated.

? OS - Windows 7 ?
? x64
hp dm1z laptop


Originally, my problem was that I would put my computer into sleep or hibernate and I would be unable to recover back into windows. HP helped me turn the power settings off and on thus resetting it and it fixed it.

But now my computer hits BSOD once it's been asleep for about 10-15 mins, extended periods. It'd show BSOD out of no where!

A:BSOD - Driver Power State Failure

Hi,

The single BSOD blames your wireless networking driver.

Code:
athrx.sys Tue Sep 22 14:47:11 2009 (4AB83AAF)
See if an update fixes it - http://welcome.hp.com/country/us/en/support.html

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Dec 17 18:21:38.883 2010 (GMT+13)
System Uptime: 0 days 0:55:21.662
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0316aa20 fffff800`00b9c518 fffffa80`02f7c7d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 98

Current OS
? Windows 7 Home Premium
? 64-bit

? What was original installed OS on system?
Windows Vista Home Premium 64-bit.

? OEM version (came pre-installed on system) or full retail version?
OEM Version.

? Age of system
7-8 Months.

? Age of OS installation
Windows 7 just installed, but i had this problem previously with Vista.

? CPU
Intel i7 920

? Video Card
Nvidia GTX 285

? MotherBoard
Not sure.

? Power Supply - brand & wattage
Not sure.

Thank you for your time. :)

A:BSOD driver power state failure

Hi -

The bugcheck on the lone mini kernel dump -

0x9f (0x6,,,) = driver in an inconsistant state of power; the power transition timed out waiting to synchronize with the Pnp

The first driver was named the probable cause of the BSOD. They all need to be updated -
[/font] [/code]

Code:

RTSTOR64.SYS Tue Dec 02 01:01:40 2008 (4934CF44) - Realtek USB 2.0 Card Reader

e1y60x64.sys Mon Aug 18 17:45:05 2008 (48A9ED61) - Intel(R) 82567LF-2 Gigabit Network Connection
gwfilt64.sys Thu Apr 10 04:20:29 2008 (47FDCDCD) - Realtek HD audio
SCDEmu.SYS Tue Aug 07 11:19:48 2007 (46B88D94) - PowerISO Computing, Inc.

Realtek HD Audio --> http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false

Realtek USB card reader drivers --> http://www.realtek.com.tw/downloads/...&GetDown=false

Intel Intel(R) 82567LF-2 Gigabit Network Connection --> http://www.intel.com/support/etherne.../cs-029669.htm

Power ISO - see system manufacturer's web site.

Un-install Daemon Tools/ Alcohol 120. The driver common to each has caused many BSODs in Windows 7 systems.

Regards. . .

jcgriff2

.




Windows 7 x64 - Bugcheck 0x9f (0x6,,,)

Code:

Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading ... Read more

Read other 6 answers
RELEVANCY SCORE 98

I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob

A:Driver power state failure BSOD

  
Quote: Originally Posted by rbdig


I updated my HP Pavilion from Vista to Win 7 and since then have experienced a Driver Power State failure crash on a regular basis.

System Specs are: 3 GB Ram, 32 OS, Intel Quad Core 2.3 ghz

I have hopefully attached the dump files that will help in diagnosing the problem.

Any help would be truly appreciated! Thanks!!!


Bob


Hi Bob

We need the actual DMP file. yours is an unreadable html file.

Let us know if you need help

Ken

Read other 2 answers
RELEVANCY SCORE 98

My brand new HP Envy computer already got this blue screen [driver power state failure was all I was able to read].
Got scared! Rebooted, it was hard to get the wifi connection back, but I did. Rebooted again, just to make sure, and it takes much longer time for it now, to come back to life.

I might add I wasn't doing anything at all when it happened ... just woke it up from sleeping.

[I'm a rather unexperienced user ]

A:Already BSOD - driver power state failure

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field.
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

Read other 1 answers
RELEVANCY SCORE 98

Hi,

Im having bsod driver power state failure on my brand new Asus N551JX. It happens after opening the lid without being plugged in.
Here is the minidump:
071515-27015-01.dmp :: Free File Hosting - File Dropper: File Host for Mp3, Videos, Music, Documents.

A:BSOD Driver Power State Failure

I think it might be a problem with the graphic card (gtx950m) driver

Thanks for your help

Read other 10 answers
RELEVANCY SCORE 98

Hello,

I updated my laptop and restored all my drivers, My laptop is a Asus S551LB.
All the drivers are up-to-date says my driver program.
Is there something wrong?

Many Thanks,

LAPTOP-Tue_06_09_2015_121020_66.zip

A:BSOD - Driver Power State Failure

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

Read other 1 answers
RELEVANCY SCORE 98

Over the last two days I've been getting excessive amounts of BSODs, sometimes I'll get 3 or 4 in a row when trying to start up my laptop. I attached a few of the dump files and I'm hoping someone can help me out, it would be very much appreciated.
 

A:BSOD driver power state failure

jhawk90 - please place your minidump files in one Zip file.
 

Read other 1 answers
RELEVANCY SCORE 98

I don't even know why this started but it did a few weeks ago. Funny, I've never had a BSOD before even though I've owned 3 or 4 computers. Anyway, this one has occurred several times and it always seems so random. It kinda seems connected to Standby or Hibernate because it usually happens after one of those two things occurs. In fact with hibernate I can usually guess that right after it comes out of hibernate, a few minutes later I will be greeted with the wonderful BSOD.

Here is the minidump. Help would be very appreciated.

A:Driver Power State Failure BSOD

Only ran the last 5 memory dumps (the 6th one was from December, so I left it out).

A couple of KB articles that relate to the errors that you're getting and the sleep/hibernate functions:

KB 975599 Stop error when you put a computer that is running Windows 7 or Windows Server 2008 R2 to sleep or into hibernation, or when you restart the computer: "0x9F"
KB 977186 Error message when you try to resume a Windows 7-based or a Windows Server 2008 R2-based computer from hibernation: "Stop 0x0000009F"

4 of the dump files blame atapi.sys (a Windows driver), while the 5th blames Apfiltr.sys (a component of your Alps touchpad drivers)

I'm not sure about the exact cause - but I would:
- check to see if the KB articles above apply to your system
- update your Alps touchpad drivers
- update your chipset/storage drivers
- update your graphics drivers

You can get the drivers from here: Select software and drivers HP Pavilion dv4-1225dx Entertainment Notebook PC - HP Customer Care (United States - English)
Please uninstall the old drivers first, then install the freshly downloaded one's.

Please post back if that doesn't stop the BSOD's.

Summary of the BSOD's:

Code:
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Debug session time: Fri Apr 23 21:30:31.203 2010 (GMT-4)
System Uptime: 0 days 3:05:41.747
BugCheck 9F, {3, fffffa8004c1c680, fffff80000ba2748, fffffa800834fc60}
Probably caused by : atapi.sys
BUGCHECK_STR: 0x9F
PROCESS_NAME: firefox... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello, I seem to be having a bit of a problem with Windows 7. The computer seems to crash whenever Im using it. It's not limited to specific tasks... it crashes whenever it wants. When it does happen, i'll get a 0x9f error.
Not really sure what info to include but here's what I know the computer has:

Model: Sony Vaio AR250G
HDD: 180GB SATA drive (I think)
RAM: 2GB
Processor: Intel Centrino Duo
OS: Windows 7 Ultimate 32 bit

Ive attached some dump files too, I hear that they are useful.

Any help is really appreaciated.
Thanks a bunch.

A:Driver State Power Failure BSoD

It appears as if your webcam drivers are causing the issue. Please uninstall them and install the latest version.

These old drivers need to be updated:
Code:
826c0000 826fd000 ti21sony ti21sony.sys Mon Feb 20 19:32:31 2006 (43FA5F9F)
826fd000 827a7880 slim slim.sys Fri Jun 30 04:13:28 2006 (44A4DD28)
88e09000 88ec9000 iaStor iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
88efe000 88f0e780 SI3132 SI3132.sys Wed Sep 21 12:04:55 2005 (433184A7)
88f7a000 88f85080 PxHelp20 PxHelp20.sys Fri Oct 28 14:29:12 2005 (43626DF8)
88f86000 88f88880 SiWinAcc SiWinAcc.sys Mon Nov 01 15:21:31 2004 (41868CBB)
895e2000 895e3480 SiRemFil SiRemFil.sys Tue Sep 20 18:18:19 2005 (43308AAB)
8a810000 8a8d0000 dump_iaStor dump_iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
8a921000 8a925b20 AegisP AegisP.sys Mon Oct 24 10:38:50 2005 (435CF1FA)
8f421000 8f8615c0 nvlddmkm nvlddmkm.sys Tue Feb 20 20:05:48 2007 (45DB9AEC)
8f971000 8f997e00 e100b325 e100b325.sys Fri Nov 16 13:53:32 2007 (473DE72C)
8f998000 8f9c1000 Apfiltr Apfiltr.sys Tue Dec 05 06:26:00 2006 (45755748)
8fc33000 8fcd6000 stwrt stwrt.sys Tue Feb 06 13:14:55 2007 (45C8C59F)
8fd1e000 8fd4f580 HSFHWAZL HSFHWAZL.sys Tue Oct 18 19:52:32 2005 (43558AC0)
8fd57000 8fd5e580 SonyImgF SonyImgF.sys Mon Mar 06 04:38:59 2006 (440C0333)
8fe19000 8fe30000 5U870CAP 5U870CAP.sys Fri Jun 30 04:27:08 2006 (44A4E05C)
8fe34000 8ff27d00 HSF_DPV HSF_DPV.sys Tue Oct 18 19:53:21 2005 (43558AF1)
8ff2... Read more

Read other 2 answers
RELEVANCY SCORE 98

I've been dealing with random BSOD for months now when I sleep/hibernate my computer. Lately it has gotten quite bad and happens nearly everytime. I'm thinking it is a hardware issue, but I'm trying to rule out a software issue. I've tried to update every outdated driver on my laptop to the latest version. Nothing seems to help.

I've also run full hardware diagnostics/memory scans, and that doesn't reveal any problems.

Any help before I throw the computer out the window would be appreciated!

Thanks,
Michael

A:BSOD Driver Power State Failure

raterus, welcome to SF .

You mentioned several bugchecks occurring over a period of a few moths yet the file
contains not more than one dump file, if you have the rest please upload them as well.

As for the bugcheck in question.

The predominant driver of the stack is nvkflt.sys:


Code:
fffff800`00b9c4e0 fffff880`0470b854 nvkflt+0x38854
fffff800`00b9c4e8 fffff880`0470c938 nvkflt+0x39938
fffff800`00b9c4f8 fffff880`046f32d4 nvkflt+0x202d4
fffff800`00b9c518 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c520 fffff880`046f327c nvkflt+0x2027c
fffff800`00b9c580 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c598 fffff880`046e569c nvkflt+0x1269c
fffff800`00b9c618 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c630 fffff880`0470f090 nvkflt+0x3c090
fffff800`00b9c638 fffff880`0470daa8 nvkflt+0x3aaa8
fffff800`00b9c648 fffff880`046e569c nvkflt+0x1269c
Driver Reference Table - nvkflt.sys

If we check it's time-stamp we can see that it is not inline with your description of the problem
being it is very recent.

Code:
Timestamp: Fri Aug 09 21:59:07 2013
Driver Version 9.18.13.2078
Download the latest version offered by your OEM.
Dell Support
Attachment 285494
Looking at the bugcheck we can see it's due to the PNP-subsystem:

Code:
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time (usually 10 minutes).
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
... Read more

Read other 7 answers
RELEVANCY SCORE 98

hi i have hp laptop
i get always crash driver power state failure

Read other answers
RELEVANCY SCORE 98

I just recently got a new laptop and have gotten BSOD twice now with DRIVER_POWER_STATE_FAILURE
I wasn't on the computer at the time of the errors, the first time it was on over night downloading, the second time i think it just had some folders open and google chrome.It is on Windows 7 Home Premium 64bit OEM, I've only had it for about 2 weeks.
HP Pavilion dv6-6b10tx Notebook (DV66B10TX(A3E16PA)) | Techbuy Australia
I couldn't run perfmon /report it said
An error occured while attempting to generate the report.

Access Denied.

Hope you can help!

A:BSOD Driver power state failure 9f

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [K:\BSODDmpFiles\787Bill\Windows_NT6_BSOD_jcgriff2\012712-21496-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`041733c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c5c000 PsLoadedModuleList = 0xfffff800`02ea1670
Debug session time: Fri Jan 27 01:38:38.811 2012 (GMT-7)
System Uptime: 0 days 8:57:27.857
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi,
I'm using a Asus UX32ln.
I've been having getting this BSOD for a while. However, I noticed that it only occurs some time (maybe 15-30mins) after i run an application using the dedicated GPU (Nvidia Geforce 840m). If only the integrated graphic card is used, it runs fine.
Thanks.

A:driver power state failure BSOD

Hi weishou,

Welcome to the 8forums.
Unfortunately your attached zip file is empty.
Please try to upload the zip file again.
Please check the minidump folder for dump files: {windows partition}\Windows\Minidump.

Read other 13 answers
RELEVANCY SCORE 98

OS: Windows 7 Ultimate
? 32-bit
? Age of system: 2~ years
? Age of OS installation: Two Weeks
? CPU: AMD Athlon X2 Dual-Core QL-60 1.90GHz
? Video Card: ATI Radeon HD 3200 Graphics
? MotherBoard: Not sure..
? Power Supply - brand & wattage: HP Part No.: 384019-002 Wattage: input - 100-240V~1.7A 50-60hz. output: 18.5V - 3.5A 65W (I wasn't sure which to put, so I just put everything I saw.)

After installing Windows 7 Ultimate (I had windows 7 RC before, and it ran fine), I've been getting a BSOD at random times that says:
DRIVER_POWER_STATE_FAILURE
0x00000009f

Then it would automatically restart. When it starts up again, usually it says that my system shut down unexpectedly and it asks if I want to search for solutions, but it keeps happening. The only programs that I can think of which are running at most times that these BSOD's come up are google chrome, windows live messenger, explorer.exe and microsoft word. I would appreciate any kind of solution.

A:BSOD - Driver Power State Failure

Hi -

The bugchecks on the 2 dumps -

0x9f (0x3,,,) - driver in an incosistant power state and blocking an IRP for too long a time

The Microsoft MSDL SYM site used to obtain symbol files to identify Microsoft OS componants is unable to ID the NT Kernel in your Windows system. I don't know the reason for this.

Run the System File Checker/ Repair utility -
START | type cmd.exe into the start search box | right-click on cmd.exe | select run as Administrator | type the following:

Code:
sfc /scannow
Upon completion re-boot to allow files in use to be repaired.

SFC general info - http://support.microsoft.com/kb/936212
SFC & the CBS log - http://support.microsoft.com/kb/928228

Validate your Windows OS installation at the Microsoft Genuine Advantage site.

WGA --> www.microsoft.com/genuine

I don't know how you got a 2007 driver for Avira in your system -


Code:

avgio.sys Thu Feb 22 09:57:32 2007 (45DDAF5C) - Avira anti-virus
AGRSM.sys Mon Nov 10 09:56:37 2008 (49184BA5) - Agere SoftModem Driver

There is not much that I can do with the symbol errors present.

I would suggest that you re-install Windows 7.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpa.exe
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Debug session time: Mon Mar 15 16:40:53.697 2010 (GMT-4) ... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hello,

I made a thread about this already but no one would reply can someone help me please? I really want to get rid of this BSOD
I want to know what the problem is, thanks

http://sdrv.ms/14ltYEj

edit: windows 8

A:Driver power state failure (BSOD)

I'm late for work, please post back in order to remind me to follow up on this topic (I get email notification when you reply)>

Make sure that you have ALL available Windows Updates
While waiting, start with these free diagnostics: Initial Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Aug 1 14:52:25.525 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080113-27580-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:29:58.649
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
Probably caused by :amd_sata.sys
BugCheck 9F, {3, fffffa800e4515a0, fffff80017199770, fffffa800e4407b0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800e4515a0, Physical Device Object of the stack
Arg3: fffff80017199770, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800e4407b0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_disk_IMAGE_amd_sata.sys
BIOS Version 1503
BIOS Release Date ... Read more

Read other 1 answers