Over 1 million tech questions and answers.

RAM (Random Access Memory) - "Shared Memory" , Windows shows less RAM.

Q: RAM (Random Access Memory) - "Shared Memory" , Windows shows less RAM.

hello madame and sirs,

Ihave got 128 mb ram on my pc. when i start my pc it shows 32mb shared memory. windows shows 96mb ram. i am not able to install some applications which require min.128mb ram.(windows 2000 pro)&(windows98se)

i once used KNOPPIX LIVE CD and then created some swap file as prompted..... which i deleted later on. i dint notice the ram showed my windows then. incidently i have even formatted my c: drive lateron .... but windows shows 96 mb ram

I want my ram to be fully utilised.. pls help

RELEVANCY SCORE 200
Preferred Solution: RAM (Random Access Memory) - "Shared Memory" , Windows shows less RAM.

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: RAM (Random Access Memory) - "Shared Memory" , Windows shows less RAM.

128 - 32 = 96

Shared memory means that a part of your system memory is used by the video card and is not available for programs. You should be able to adjust the amount of shared memory in BIOS setup. Note that you will never be able to get the full 128MB unless you get a proper video card.

Read other 5 answers
RELEVANCY SCORE 116.4

I want 2 purchase a laptop. and i am confused in shared memory and built in memory.
I want 512MB of video memory.

1. (Video Memory) = Up to 1309 MB Total Available Graphics Memory &(Ram 3GB)
2. (Video Memory) = shared & (Ram 2GB)

1 and 2 are the two spec's avilable in market. suggest me which one i purchase.
 

A:What is best "shared memory or built in video memory" for laptop

Not knowing which graphics adapters they are makes it really hard to know which to recommend. A ton of video memory on a very low end card or low end integrated GPU isn't going to help much.

What's the purpose of this laptop?
 

Read other 3 answers
RELEVANCY SCORE 109.6

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 103.6

But the Memtest+ doesn't have error after two cycles. I have 6*4Gb memory, the test time is very long. The BSOD doesn't happen very often, like 1 or 2 times in a week. What I can do on this situation?

A:BSOD Dump shows "memory cruption"

Follow the instructions in the big warning box above your post. Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 103.2

Hello,

I have a user in the domain that had access to her network shares (mapped network drive and H:\users\usershares\*username*) and now she is getting "Access Denied" errors. I have checked to make sure that she has the correct permissions and she does. I know that she can connect to that server because she can access other shared drives on the same server. She is also the only user in the domain that has this issue. If I log on as her on my PC she DOES have normal access to all her shares. She is running windows XP pro sp3. The domain controller is Server 2008.

Anyone have any ideas?

Thanks.
 

Read other answers
RELEVANCY SCORE 102.8

Hi again everyone, whenever i want to play chess i get this error when i open chess server like pogo.com
The instruction at "0x7c901010" referenced memory at "0x0000001c". The memory could not be "read". click on ok to terminate the program
 

A:The instruction at "0x7c901010" referenced memory at "0x0000001c". The memory could n

Read other 7 answers
RELEVANCY SCORE 102.8

The instructions at "0x00402423" referenced memory at "0x000000074". The memory could not be "read".

I am receiving this error when I run nightly batches. a simple reboot makes the error go away but periodically the error will return.

I am running MS 2000 Server w/SP4. I dont believe this to be a memory issue.

Any suggestions would be helpful.

Alex
 

A:The instructions at "0x00402423" referenced memory at "0x000000074". The memory could

Google and get memtest and run it for atleast 7 passes, any errors and you need to replce your ram.
 

Read other 9 answers
RELEVANCY SCORE 102.8

So i've been reading around and i have a similar problem that's come up before.

I've got tons of TMP files in My Documents and in Local Disk C.

When trying to delete them i get this response:
0x01d62739" referenced memory at "0x02354e50". The file could not be deleted.

any help???
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:45:40 PM, on 2/10/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\am9zZSB2YXJnYXM\command.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Network Monitor\netmon.exe
C:\Program Files\Dell\NICCONFIGSVC\NICCONFIGSVC.exe
C:\WINDOWS\system32\svchost.exe
c:\WINDOWS\system32\ZuneBusEnum.exe
c:\Program Files\Zune\ZuneNss.exe
C:\WINDOWS\system32\wbem\wmiprvse.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxsrvc.exe
C:\WINDOWS\system32\igfxper... Read more

A:0x01d62739" referenced memory at "0x02354e50". The memory could not be "read.

????
 

Read other 2 answers
RELEVANCY SCORE 102.8

The instruction at "0x7c9100c8" referenced memory at "0x02030010". The memory could not be read.
I thing, it?s problem with my graphycs card. I have 2 months old GeForce 8800 1Gb DDR2, and after instaling newer drivers and PhysX driver(which i after errer signature uninstaled) is imposible to start nearly any game, and if I want to open NVIDIA control panel, or something like that, this errer appears. I realy don?t know, what I have done bad with my PC. Please Help me!!!

A:The instruction at "0x7c9100c8" referenced memory at "0x02030010". The memory could n

Me too I have same problem
Someone give help us!!

Read other 1 answers
RELEVANCY SCORE 102.8

the instruction at "0x00401082" referenced memory at "0x00000000". the memory could not be "written"

I got this message, now have started in safe mode under the last know successful boot, I ran Hijackthis and got the following, not sure what to do next

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:58:48 PM, on 3/20/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\ge security supra\syncservice.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Norton Internet Security\Norton Internet Security\Engine\16.0.0.125\ccSvcHst.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\GE Security Supra\ProxyDaemon.exe
C:\SSL\stunnel-4.10.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\eFax Messenger 4.3\J2GDllCmd.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\WINDOWS\system32\drivers\svchost.exe
C:\Program Files\GE Security Supra\SyncInfoApp.exe
C:\Program Files\eFax Messenger 4.3\J2GTray.exe
... Read more

Read other answers
RELEVANCY SCORE 98.8

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 98

OS: Windows 7 64x SP1
Purchased from a retail, and first OS to be installed
Motherboard: M5A99FX PRO R2.0
CPU: AMD FX(tm_ 6300 Six-Core Processor
Mem: Corsair CMZ16GX3M4A1600C9
AMD Radeon HD 6700 series

Voltages
3.3 V at 3.312 V
5 V at 4.971 V
12 V at 12.097 V
VCORE at 1.320
VDDA 2.5 V at 2.508

CPU offset 1.320v
CPU/NB offset 1.187
CPU VDDAV 2.526
DRAM 1.494
NV 1.116
NV HT 1.214
SB 1.100

SO the computer is only a couple months old. I built it myself. Let me know what else I can give you guys, thanks for the help its been driving me crazy for the last few months.

A:BSOD "Memory Management" Random Crashes

I do see this driver listed on the system > AODDriver2.sys Thu Apr 5 05:23:37 2012
It's the AMD Overdrive driver and can sometimes cause issues in Win 7 & 8.

But lets see if driver verifier can pinpoint which if any particular driver is causing it.
Follow the instructions here, make sure to set a restore point before enabling verifier, also if you do not have Windows disk create a Windows repair disk
http://www.techsupportforum.com/foru...ed-473665.html

Read other 1 answers
RELEVANCY SCORE 98

Well... I never thought I'd see the day when I actually need others' advice on figuring out computers errors, but here I am! First off, a big thanks to all of the great advice/suggestions on the forum. I think I've narrowed it down, but I figure I'd let the experts take a quick peak and either confirm or deny my suspicions.

Background: Built this machine in spring of last year. Basic specs: Q6600 2.4, 4gig (4x1) memory, Gigabyte mobo,Nvidia 8800GT gfx card. Ran fine under windows XP 32bit. Never any BSOD or other issues.

Several days ago, I purchased and installed student version of Win 7 64bit. Although the clean install went fine and it supposedly found all of the correct drivers... that made me nervous so I installed the latest NVIDIA 191.07 drivers and the ones for the realtek sound/eithernet from the motherboard manufacturer (Gigabyte).

Since the install, I randomly get maybe ~1-2 BSODs a day... in rate of time we're talking maybe one every 2 hours or so, although I've also had 2 in quick succession.

Following the advice I read on the forums...

I ran the system file checker... that was fine.
I have also included my info from MSINFO32.exe (see below with the minidumps).
I started doing some minidump analysis
I have only included the last 3 minidumps below, but I've had a few before that. Each time it is slightly different, HOWEVER, there is a common theme which appears to be hardware. The crashes are always with some sort of windows related exe such as C... Read more

A:"Random" sproadic BSODs - Memory or video?

Here's a description of the STOP 0x3B error: BSOD Index
Here's a description of the STOP 0x50 error: BSOD Index

I'd first suspect your video drivers. In order to check this, download the latest version of the nVidia drivers from this link: Drivers - Download NVIDIA Drivers

Then uninstall the current video drivers from Control Panel...Programs and features...Uninstall a program.
Then install the freshly downloaded one's and monitor for BSOD's.

I'd also wonder if there's a hardware issue with your video card - but the only way that I know of to check that is to try another video card. Do you have another video card that you can use as a test?

If both of these tests doesn't work out, please post back and we'll talk about using Driver Verifier to help force a crash that will point out the problem driver's name.

Summary of the BSOD's:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Oct 24 01:42:35.700 2009 (GMT-4)
System Uptime: 0 days 0:17:12.854
BugCheck 3B, {c0000005, fffff96000084b33, fffff88007de20a0, 0}
Probably caused by : win32k.sys ( win32k!InternalRebuildHwndListForIMEClass+9b )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: explorer.exe
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Sat Oct 24 02:07:42.305 2009 (GMT-4)
System Uptime: 0 days 0:02:46.458
BugCheck 50, {fffff180c43bd6e8, 0, fffff9600011b109, 7... Read more

Read other 2 answers
RELEVANCY SCORE 98

I'm having ALOT of problems right now...
Most annoying and disrupting problem are the random BSOD's. I downloaded Whocrashed and alot of crashes seem to be "memory management" . Sometimes it's 3rd party programs..

The BSOD lasts for 1/2 a second and computer immediately reboots so it's hard for me to say what it was about. I checked in event viewer the different errors but i'm at 1000+ error/warnings.

At one point, as i was downloading Leagues of Legends ( game ) and Crysis 2 from Origins, while my uTorrent was actively downloading and Firefox was opened, i got an error from uTorrent saying "windows ran out of memory".

What do I do. My computer keeps randomly crashing and i've been looking online for solutions, it's just too complicated for me to find anything related to my problems.

The BSODS often occur on a reboot of the computer after installing/uninstalling a program. Right after entering my user password , 2 seconds into loading desktop, it immediately crashes. Not always but i've noticed it happens often.

now i'm getting problems with applications. Its crashes after crashes after crashes.

I have origin installed for Crysis 2 and BF3.

Crysis 2 and BF3 though are a very big problem. Both applications crash non-stop. i can't even play for one second. BF3 has a browser launcher, when i try to launch a game, before even opening it says " Battlefield 3 has stopped working ". In the Event Viewer, it seems to give me something ... Read more

A:Random BSODS (mostly "memory management"), often on startup

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 4 answers
RELEVANCY SCORE 96.8

Yes, Differant case, same problem. As the previous post, I loaded Access 97 on an XP Home edition set-up. I also get the same memory problems popping up.
Here are my stats:
Pentium 4 3.20 GHz
1.0 GB RAM
150 GB HD
Any suggestions?
 

A:Solved: Win XP + Access 97: "Insufficient Memory"- differant case

Read other 8 answers
RELEVANCY SCORE 96.4

I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.



Any help would be great.

A:"Out of Memory" Error, all apps continually increase memory usage

It sounds like your PC has a cold... er virus!

What AV are you running?

Read other 9 answers
RELEVANCY SCORE 96.4

Hi, I recently put together a new computer with parts from newegg, and when I attempt to start it up, my debug LED reads "53" which, according to the manual, indicates a memory initialization error (no usable memory detected).

My system:

CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor BX80623I72600K

Motherboard: ASRock P67 EXTREME4 GEN3 LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard

RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL

CPU Cooler: Cooler Master Hyper 212 Plus

PSU: Thermaltake Toughpower XT TPX-775M 775W ATX 12V v2.3 / EPS 12V v2.91

Video Card: EVGA 012-P3-1571-KR GeForce GTX 570 HD w/Display-Port (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16Click to expand...

Things I have tried:

1. So, I installed the whole thing, LEDs light up, fans whirring, all that. Just no POST.
2. I followed this guide to try and solve my problem, to no avail: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-boot-video-problems
3. Currently, I have everything taken out of the case with only the motherboard, CPU, HSF, and PSU hooked up.
4. I have tried both sticks of RAM seperately in each slot.
5. I have tried resetting the CMOS.
6. I was careful to constantly touch the grounded PSU before I touched sensitive pieces.
7. I made sure all connections were secure, and everything was in its proper place.

N... Read more

A:Can't POST, "Memory initialization error. No usable memory detected"

Read other 9 answers
RELEVANCY SCORE 96.4

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

Read other answers
RELEVANCY SCORE 95.2

I'm installing a new laptop for a user whose old laptop is starting to break down. He needs Access 97 in order to be able to look into an old database that is not in production use anymore, and that we have been unable to correctly migrate to a later version.

I installed Access 97 from the original CD with the original product key, and the installation as such runs smoothly, but then when I try to run Access it immediately throws up an "insufficient memory" error (or rather, its equivalent in Dutch). Right after that it says that a system error has occurred or there was insufficient memory to run Microsoft Access.

On his old laptop, that has the same version of Windows XP, Access 97 does run properly.

I've tried running Access 97 in Win95, Win98, WinNT or Win2k compatibility mode to no avail.

Any ideas?
 

A:Solved: Win XP + Access 97: "Insufficient Memory"

Read other 7 answers
RELEVANCY SCORE 94.8

anuyone ever seen this problem or know how to what is the cause of it or where it came from, and how do we fix it?
thx

error
 

A:memory could not be "written" 0x77f52b6a referenced memory at 0x00000067

Try reseating your RAM module(s) and running a Memory tester on them, one at a time.

See the PDF file on how to do that on the link below.
 

Read other 1 answers
RELEVANCY SCORE 94.8

I really hope someone can help on this.

New build. MSI H81i mITX MoBo with Celeron G1840 (Socket 1150) and 1 stick of Corsair 4gb DDR3-1333 memory. 300watt PSU. One 500gb HDD and 1 DVD drive (both sata-3)

When I switch on the computer, all I get is 3 long beeps. No display. Nothing.

MSI uses the AMI BIOS, and according to their website: "3 beeps - Base 64K memory failure - bad memory".

Memory is fine (brand new and tested in another build). I removed and reseated it to be sure. Memory is in DIMM1 (of 2) closest to CPU.

There are separate Beep Codes for "memory", so I'm wondering what "Base 64K memory" is? If it were the CPU, that has its own Beep code as well, so I don't think it's the cpu cache.

I'm trying to build a HTPC for Mother's Day, so time is of the essence. Please help! TIA.
 

A:"Memory Error" on new build, but memory is fine (3 Beeps)

Have you tried pulling out the motherboards CMOS battery for a couple of minutes then re-installing it?
 

Read other 2 answers
RELEVANCY SCORE 94.8

The instruction at "0x77f87e4b" referenced memory at 0x000000 the memory could not be 'read'

I see this error pretty frequently, with different addresses. I had it on my home system, and it only went away after I replaced the motherboard, which leads me to believe it's likely a hardware issue. It survived after multiple os rebuilds and DoD drive wipes, so I'm pretty sure it's not a software issue.

Would anyone be able to fill me in as to what the cause of this error is?

[email protected]

Thanks!
David
 

A:The instruction at "0x77f87e4b" referenced memory at 0x000000 memory could not be 're

Read other 11 answers
RELEVANCY SCORE 94.8

This "Persistent" error at startrup: The instruction at "0x7919af2" referenced memory at "0x00000010". The memory could not be written.
Sometimes appears at shutdown too.

Please help me fix this "Nagging problem"?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 3316 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 384 Mb
Hard Drives: C: Total - 305242 MB, Free - 109486 MB; D: Total - 239013 MB, Free - 221087 MB;
Motherboard: Intel Corporation, DG33BU
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Disabled

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 10:17:37 AM, on 7/8/2014
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\logishrd\LVMVFM\UMVPFSrv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\Program Files\Common Files\Acronis\Schedule2\schedul2.exe
C:\P... Read more

A:The instruction at "0x7919af2" referenced memory at "0x00000010"Tech Support Guy Syst

Read other 10 answers
RELEVANCY SCORE 94.4

Hi and thanks for reading.

I have ethwork installed on my very basic ZTE Zmax One mobile phone. Normally the problem I see is that ALL my processes are duplicates on the list. But this readout is different. I'll post the printout below, but the issue is that I have never seen the local address be an IANA Shared Internet Address, like "100.69.0.26:42947", usually it's assigned IP within my network (192.168.1.141) Any insight into the duplicates AND the funky local address would be appreciated. I'm going to post the entire readout below, so after you see one instance of what I'm talking about there would be no real need to keep scrolling.

Oct 7, 2018, 1:51 PM (23 hours ago)

Ethwork

Bytes sent: 293875978 (280.26 mb)
Bytes received: 3007124311 (2.80 gb)
Packets sent: 1913242
Packets received: 2733745
Bytes sent (Mob): 20861440 (19.90 mb)
Bytes received (Mob): 87259093 (83.22 mb)
Packets sent (Mob): 104955
Packets received (Mob): 112687
Application: com.qualcomm.qti.telephony.vodafonepack.CarrierpackApplication
Package name: com.qualcomm.qti.telephony.vodafonepack
Process: com.android.phone
UID: 1001
Version: 1.0
Protocol: TCP (IPv6)
State: TIME_WAIT
Local Address: 192.168.1.141:45657
Remote Address: 52.40.74.180:80
Hostname: ::
Application: com.qualcomm.qti.telephony.vodafonepack.CarrierpackApplication
Package name: com.qualcomm.qti.telephony.vodafonepack
Process: com.android.phone
UID: 1001
Version: 1.0
Protocol: TCP (IPv6)
State... Read more

Read other answers
RELEVANCY SCORE 94

Problem:

Everything was running fine until yesterday, when my PC crashed with the BSOD giving me the "IRQL not less or equal" error. I ignored it and carried on- which resulted in the computer crashing with "Memory management" blues whenever I started something that was not the browser (It later started crashing on browser start too).

I first thought it was the temperature - Memtest95 and GPUtemp said otherwise.

So I started testing the RAM (taking one DIMM out) with Memtest86- It passed 4 cycles, so I shut the PC down and put the other DIMM in.

When I turned the PC on again, there was no signal sent to my screen, and none to my keyboard (and the HDD light on the front of the case did not start blinking like usual). The fans were running, so I figured something might be wrong with the DIMMs I put in. I removed the graphics card and plugged the screen into the motherboard.

Now the screen gets a signal, background lighting starts up, and then it shuts down to hibernation again. This repeats itself until the machine is shut down manually.

I got no idea what to do.

System specs: http://pastebin.com/DQwejZLx
I can not post the Minidump folder, since the PC can't start and I did not back it up. Sorry.

Thank you for your help.
 

Read other answers
RELEVANCY SCORE 94

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

Read other answers
RELEVANCY SCORE 93.6

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

Read other answers
RELEVANCY SCORE 92.4

Hi,

what to do in this case ""Windows-virtual memory low""

pl advise
Bhaumik
 

A:""Windows-virtual memory low""

Double the values at least until you get more ram

Run sysdm.cpl and go to the location in my screenshot.

Be sure to click the "set" tab after making the change.

The default is typically 1 1/2 times installed ram. But if you have a lot of ram, this rule of thumb may not apply.

You may also benefit by running msconfig and selecting the startup tab.

There you can disable many programs from starting that are not always needed -- such as media player startups. Choices are easily reverseable.
 

Read other 1 answers
RELEVANCY SCORE 92

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

Read other 1 answers
RELEVANCY SCORE 91.6

Hi, I have a similar problem.
When I close IE6 it says: iexplore.exe Application error "The instruction at "0x7e1fgaf3" referenced memory at "0x7dc48950". The memory could not be read. Click Ok to terminate.

All weeks I have the "blue" screen.

I attached the HiJackthis.
Thank you so much for your help.


Logfile of HijackThis v1.99.1
Scan saved at 12:51:50 AM, on 7/25/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\Program Files\TOSHIBA\Power Management\CeEPwrSvc.exe
C:\Program Files\NavNT\defwatch.exe
C:\WINDOWS\System32\DVDRAMSV.exe
C:\Program Files\NavNT\rtvscan.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Canon\CAL\CALMAIN.exe
C:\WINDOWS\system32\MsgSys.EXE
C:\WINDOWS\Explorer.EXE
C:\Program Files\TOSHIBA\E-KEY\CeEKey.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\Program Files\NavNT\vptray.exe
C:\Program Files\Lavasoft\Ad-aware 6\Ad-watch.exe
C:\Program Files\D-Link\Air USB Utility\AirCFG.exe
C:\Program Files\ANI\ANIWZCS2 Service\WZCSLDR2.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\MS... Read more

A:The instruction at "0x7e1fgaf3" referenced memory at "0x7dc48950"

Not much in your log, but you should have a security analyst look it over

In the meantime, Run the System File Checker to see if it resolves your IE issue.

Go to the Run box on the Start Menu and type in:

sfc /scannow ( sfc if not reconized) (Note that there is a space between sfc and /scannow)

This command will immediately initiate the Windows File Protection service to scan all protected files and verify their integrity, replacing any files with which it finds a problem.


In all likelihood you will be prompted to insert the Windows XP CD.

Read other 7 answers
RELEVANCY SCORE 91.6

Every time I try to go to the C drive or internet get this error.. The instruction at "0x00bf5759" referenced memory at "0x00000000". The memory could not be "written"

Click on OK to terminate the program
Click on Cancel to debug the program

The system is a Dell Computer. I don't have all the specs. Running Windows XP.

This error pops up all the time. If you click Ok it disappears but it comes right back when you click on IE or click on the hard drive to access a file.

Read other answers
RELEVANCY SCORE 91.6

I recently had a virus on my computer. During the time of cleaning and removing infected files my computer came up with a error message that I can't seem to find help on. When my computer starts up, the first thing that pops up is an error message stating that there is a rundll32.exe - Application Error. The message says, The instruction at "0x010017f1" referenced memory at "0x01000003c". The memory could not be "read".

I have downloaded and run just about every program that I can find to attempt to fix this error. I have searched my computer and registry for any of the numbers in the error message with no results. I have installed and run multiple antivirus and maleware removal programs, but have not been able to remove this problem. I sure hope you can help me with this final problem in cleaning up my computer issues.

Thanks in advance for all of your assistance.

A:The instruction at "0x010017f1" referenced memory at "0x1000003c".

Hi Chuck McD and welcome to TSF.

When did you first notice the issue? Is it the same when you start in Safe Mode (tap F8 repeatedly when starting up your computer and choose Safe Mode from the options. It could very well be a program that you have recently installed that caused the issue.

Geekgirl had some good advice on this forum for another user that may help here. Can you try some of the advice that she gave and report back

I would also suggest you start a new thread in the ' Virus/Trojan/Spyware Help' section and give then all the details they require to help you as you had a prior infection that may not have been fully resolved.

Read other 16 answers
RELEVANCY SCORE 91.6

Hi,

This is satya. I got an error while using SmartHeap Library. Please find the attachment. Please help me anyone.
 

A:The instruction at "0x1c02ad34" referenced memory at "0x00000004"

I get these at times and have even went as far as testing my memory with Memtest86+ to no avail.

I do not use smartheap but I have seen similar memory addressing errors using different applications.

I would test your memory if this is a consistent issue.
 

Read other 2 answers
RELEVANCY SCORE 91.6

before even logging onto Windows, I get an Svchost.exe error message, "The instruction at "0x7c911689" referenced memory at "0x00000000" The memory could not be "read"" 80% of all login attempts. if I proceed with login after that error, I get a message with a countdown timer saying the system will be shut down. if no error the other 20% of the time, system is fine after login. I have NEVER seen or heard of an error occurring BEFORE start up, which is weird because NOTHING is running! I know the string of numbers usually means something, but I am no expert on that.

Any help on fixing this would be appreciated

A:The instruction at "0x7c911689" referenced memory at "0x00000000"

Hi there,

Is your computer a desktop or laptop computer? What is the brand/model of your computer may I ask? Please provide your computer specs when you get a chance. By knowing your computer specs, we would definitely be able to troubleshoot your computer issue more efficiently. Have you installed any software or updates recently?

Try this, download "MEMTEST86+" and put the program onto a bootable media(e.g. CD). Afterwards, reboot your computer and boot your computer to the Memtest86+ CD. Then, follow the on-screen instructions, and scan your computer memory for any errors.

Did this error come up all of a sudden? The error titles "Application Error", possibly a program error conflict somewhere.

Read other 3 answers
RELEVANCY SCORE 91.6

At log on I get:

The instruction at "0x7c9161fa" referenced memory at "0x00000010" This memory could not be written/

Anyone help me?
 

Read other answers
RELEVANCY SCORE 91.6

On my laptop I seem to have an issue. When I turn it on I get an error message stating: the instruction at "0x7560eb5" referenced memory at "0x00000008". The memory could not be "read" . There is no sound on my computer. The laptop is a Dell D600 running Windows XP SP3. If there is any other info need, I'll give it.
 

A:the instruction at "0x7560eb5" referenced memory at "0x00000008".

For resolution of this error follow this Microsoft link
http://support.microsoft.com/kb/842465
 

Read other 2 answers
RELEVANCY SCORE 91.6

can anyone help me...

The instruction at "0x7c93426d" referenced memory at "0x0076006c"
The memory could not be "read".

- this error message appear every windows start up.
i'm using xp.. also the windows sidebar does not work. i think its because of this error. how do i fix it?
 

A:The instruction at "0x7c93426d" referenced memory at "0x0076006c"

Hello lien615. I googled the error message and was led to this site I am presuming that you are using vista.
http://www.computerperformance.co.uk/vista/vista_sidebar_gadgets.htm
 

Read other 1 answers
RELEVANCY SCORE 91.6

Getting this error message "instruction at "0x7c91b1fa" referenced memory at "0x00000010" could not be written. Have looked at previous threads and tried turning off automatic updates, also tried to find "Windows Driver Foundation" but this is not in the local services list.
Problem does not occur in Safe mode.
System is XP laptop.
Any ideas please?
 

A:Solved: "0x7c91b1fa" referenced memory at "0x00000010".

Read other 8 answers
RELEVANCY SCORE 90

I just started getting the following error message today:

svchost.exe - Application Error
The instruction at "0x71ab6a55" referenced memory at "0x71ab6a55". The memory could not be "written".'

help how do i fix this.
I've already stopped automatic updates and restarted several times.

Please Help
 

A:The instruction at "0x71ab6a55" referenced memory at "0x71ab6a55". The memory could n

Please click here to download and install version 2.0.2 of the HijackThis Installer. ​
Run it and select Do a system scan and save a logfile.

The log will be saved in Notepad. Copy and paste the log in your next post.

Do not fix anything​
 

Read other 3 answers
RELEVANCY SCORE 90

Here is my system info:

------------------
System Information
------------------
Time of this report: 1/25/2016, 15:17:55
       Machine name: JULIANS
   Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_ltsb.151230-0600)
           Language: English (Regional Setting: English)
System Manufacturer: ASUS
       System Model: All Series
               BIOS: BIOS Date: 02/11/15 20:53:53 Ver: 05.06.05
          Processor: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (12 CPUs), ~3.3GHz
             Memory: 16384MB RAM
Available OS Memory: 16284MB RAM
          Page File: 10298MB used, 7009MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11

---------------
Display Devices
---------------
          Card name: NVIDIA GeForce GTX 980 Ti
       Manufacturer: NVIDIA
          Chip type: GeForce GTX 980 Ti
           DAC type: Integrated RAMDAC
        Device Type: Full Device
         Device Key: Enum\PCI\VEN_10DE&DEV_17C8&SUBSYS_49953842&REV_A1
     Display Memory: 14157 MB
   Dedicated Memory: 6015 MB
&nb... Read more

Read other answers
RELEVANCY SCORE 90

Hi there,I use a few programs from Oracle and Bentley (Microstation-CAD) which all recommend enabling the "Lock Pages in Memory" privilege.  All instructions to change this are either done using gpedit or secpol - neither of which are installed by default in Win 7 Home Premium.  ( in this case its the 64 bit flavour - 16G RAM - Quad Core CPUs )  Is there a supported means to do this on Win 7 HP?  If not - could I make the changes on a Win 7 Ultimate desktop (recording all changes to the registery) - then simply merge the relevant changes into the registry of Windows 7 HP?  I'd rather not as it may cause issues down the track if for some reason it is enabled in a future service pack/fix.The other option is to either boot up into a Vista partition and/or use a VM - but I suspect that would negate any possible benefit of enabling the privilege. Thanks in advance.GB

A:How do you enable "Lock Pages in Memory" on Windows 7 Home Premium

Hi Netwar,
 
I do not use Oracle, but I find an article for how to enable large page support for Oracle. It introduces how to enable large page support via Local Security Policy and Registry. I don’t know if they are step 1 and step 2 or two different methods. Please check it below:
 
https://students.kiv.zcu.cz/doc/oracle/win.102/b14305/tuning.htm
 
Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
 
Regards,Arthur Li - MSFT

Read other 3 answers
RELEVANCY SCORE 89.6

when i try to start windows media player, i get "can't perform operation, low memory." i've tried uninstalling and redownloading it but it says i have all the current components and i can't finish installing it...why does this happen?
 

A:Windows Media Player "can't perform operation, low memory"

Hiya and welcome

Go to Run and type MSINFO32
On the left choose Software Enviroment, then Startup Programs. Copy/paste the list here.

Regards

eddie
 

Read other 2 answers
RELEVANCY SCORE 89.6

When I boot my computer Windows freezes at the "Windows is starting..." screen but I can still move the mouse. This just began today. It does this same thing when I boot in the last good config and safe mode. So basically, Windows won't get past this screen no matter what mode I use.

Also, I can't reinstall XP because I get a technical error blue screen that says I may not have adequate disk space, a driver may need to be disabled, or I may need to change the video adapter whenever I try to boot from the install CD. The message also says "pci.sys."

I've had this computer for 1+ years with no problems. The only thing I can think of is that I was downloading a movie when I accidently turned off the computer at its power source earlier today. So the computer was turned off abruptly at its power source and has NOT gotten past the "Windows is starting..." screen since. Could this have ruined both of my memory cards?

I'm a beginner at the technical stuff on computers so help is definitely needed and appreciated. A step by step is preferred.

Specs:
Dell Deminsion 9100
Intel Dual 2.8
2 Mem cards 1gig
XP Media edition sp2
 

A:"Windows is starting..." freezes with no options! Bad memory cards?

Could it be that I accidently burnt out the memory. Is that even possible?
 

Read other 2 answers
RELEVANCY SCORE 89.6

My laptop is a SONY VAIO - VGN-NS255D

Anyone know how to fix this?

A:"Operating System Not Found" Error - Windows 7 (x64 bit) 4GB Memory

Did you make /have the OEM manufacturers system repair disk ?

Read other 6 answers
RELEVANCY SCORE 89.6

I tried google searching just the direct phrase of "system and compressed memory", but came up with nothing. I have never seen it before until recently, and it is using half a gig average. When I open file location, it does bring me to the windows folder, but it does not mean it was something that was put there by windows.

A:unknown "windows" software taking lots of memory

It's a new feature to compress currently occupied but unused memory to conserve some free RAM.

Read other 5 answers
RELEVANCY SCORE 89.6

Recently in the past few days windows aero decides to turn off. I can re-enable it with the personalization but it seems like a hassle to do all the time. The computer also says that it "exceeded it's allowable memory" or something along those lines.

So my question is this: Why is it doing this and how can I fix it? Also, on a related note, how can I make it so my programs can use more of my available RAM?

A:Windows Aero disables "lack of memory" error

  
Quote: Originally Posted by darkelementz


Recently in the past few days windows aero decides to turn off. I can re-enable it with the personalization but it seems like a hassle to do all the time. The computer also says that it "exceeded it's allowable memory" or something along those lines.

So my question is this: Why is it doing this and how can I fix it? Also, on a related note, how can I make it so my programs can use more of my available RAM?


Could you tell us your system specs?

My crystal ball is in being repaired.

Read other 3 answers