Over 1 million tech questions and answers.

Diagnostics card

Q: Diagnostics card

I have being trying to diagnose a fault with a laptop, some over heating problem. I have used a diagnostics card it keeping spitting out the error code 'AE' which means clear boot flag. I'm guessing the bios is performing its own checks and intefering which the card checks.

What can i do rectify this. Manuals not very good and i been trying to google it but to no avail..

Hardware= diagnostic card plugs into the parallel port of the laptop powered by the usb port and has a two digit display, Dell c640 laptop
If any one can help or set me straight i be grateful.

Preferred Solution: Diagnostics card

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Diagnostics card

Never had a good experience with diagnostics cards. All the ones I've seen are pretty useless and simply don't work well, if at all. Most moderen PCs has diag cards built in on whether it's beep codes or the diag LCDs on the back of most modern Dells. If the PC is having an over heating issue a diag card isn't gonna help anyway.

To fix a laptop that is over heating you should open the laptop up and blow the dust out of the laptop paying special attention to the heat sinks and fans. While it is open make sure the fans are spinning and that the heatsinks are in place and securly attached.

What are the symptoms the laptop is having any? Maybe it's not just overheating?

Read other 2 answers

Anyone know of any free graphics card diagnostic utilities?

I am using a Radeon ATI 300SE 128M. Windows XP.



A:Graphics card diagnostics

Try "dxdiag.exe" - it comes with XP.

Read other 3 answers

I am looking for a diagram of a P.O.S.T.Diagnostics card diagram to connect on a PCI slot.
Thanks a lot.

- Please do not create multiple threads on the same subject

Read other answers

Can any one tell me if there is a tool that I can use to run diagnostics on my video card?

I have been having issues with BSOD's and some program crashes, and I used memtest86, and I had no errors. I also ran a few disk checking programs, and no problems there either. The only other thing I have on the system is a CDRW drive, and I havent had any issues with burning or any burning program crashes.

So Im thinking that my issue is going to be my video card, but I dont have another one laying around to test with. Is there a tool that can test my video card, along the lines of what memtest86 does for RAM?


A:video card diagnostics??

Read other 16 answers


Would anybody know of any programs with which would let me do diagnostics on a sound card


A:Sound Card Diagnostics?

Hi Have you tried dxdiag?


Read other 6 answers

I am working on an HP Pavilion P6130A with 2Gb RAM, 500Gb HDD and running Vista Home Premium.

The system was turned on but plugged into a surge protector. During a severe thunderstorm a loud 'pop' was heard from the system and it totally died. Now it won't boot up. Power supply and fans are functioning but no video output.

I've inserted a hardware PCI diagnostics card which comes back with an error Code 60. Under the Award column the description of the error is "Setup virus protection [boot sector protection] functionality according to setup setting."

Can someone please tell me what this error code means and what, if anything I can do to fix it?


A:PCI diagnostics card Error Code 60 - What does it mean?!

Not sure on the code but those cards can be next to useless. But if the system was hit during a thunderstorm then you should do a visible inspection of the motherboard for blown components. Then start by swapping in a known good power supply first if nothing is seen. Next would be to remove any network card or modem if they are removal cards. Also I assume you've disconnected all USB devices as well.

You have to consider how the system would have been come into contact with the lightning strike or power surge, the obvious ways would be the power supply, a network cable through a network device that plugs into power and a phone or cable line, or a phone line connected to a modem, or a USB cable that connects to a device that plugs into power.

You can check to see if any of the devices that were connected to the system are damage as well.

Read other 3 answers

My pc is a Lenovov H50-55 with onboard AMD Radeon R700 graphics (1G dedicated & up to 6G extended). When Lenovo hardware scan kicked off today, all diagnostics passed - except for the video card. When I ran extended diagniostics, it failed on extended video memory test with a code of W19UJ2AAC-RVS4HE and "video memory". It offered to take me to support to order a "new video card." Well, first of all, it is built into the motherboard, and I don't know what the full explanation of that error code is. Can anyone help? Now when I run LSB from the downloaded file on the website here, it doesn't even get to that test before it fails. What is this telling me, and is there (other than bypassing the onboard video hardware) that can be sdone to alleviate the problem?

Read other answers

Hi. Any suggestions for a good easy to use diagnostic tool for PC hang ups, sluggish behavior and general hassles? Thanks for your advice. Steve

A:PC diagnostics

it could be caused by spyware - is this the problems you are having or just looking for some PC diags ???

Read other 1 answers

At Build this year, we gave a sneak preview of a set of new APIs designed to provide diagnostic information about running apps. You can see the videos here and here ? but note that these were based on a pre-release implementation. So, while the Build videos are still correct on broad functionality, the final API names are almost all slightly different. Plus, we added a couple of extra features after Build.

The final versions for the upcoming release are available in the Insider builds from Build 16226, along with the corresponding SDK.

At a high level, these APIs allow an app to:
Enumerate a list of running apps, including UWP apps, Win32 apps, system services and so on.
For each app, get process-specific metrics on:
Memory usage (private commit and working set).
CPU usage.
Disk reads and writes.

For each UWP app, get additional metrics on:
Memory usage (including shared commit) equivalent to the Windows.System.MemoryManager report previously available to an app for its own usage.
State info: running, suspending, suspended, not running.
Energy quota info: under or over.
Enumerate a list of any background tasks that are active for the app, including name, trigger type and entry point.
Enumerate all the processes for the app (using an enhancement to the existing Windows.System.Diagnostics.ProcessDiagnosticInfo class that was previously restricted to an app for its own usage).
The API has a simple hierarchical structure:
The AppDiagnosticInfo type represents a single ... Read more

Read other answers

My puter has been giving me error messages that I didn't have enough RAM to open some pages on the internet, so I did what any self respecting gameaholic would do, I went and bought more. I installed 768 SDRAM. And low and behold, I now have lots and lots of memory and no longer get those pesky little messages. However, when I check settings to see the performance of my new memory, it says that I only have 62% of the RAM available. This is with no windows open, I'm not on the internet, nothing. How could this be?..Is there a diagnostics program I can run that will tell me what hog is in my RAM? (no pun intended)...my system is a Windows 98 with a Pentium II. I read extensively on my mb to get the correct memory, so I don't think that is the problem...what the heck could it be?

any suggestions will be greatly appreciated.

A:RAM Diagnostics????

Read other 8 answers

Hi guys

Im looking for any computer based diagnostic software or "hardware and software" (similar to vehicle diagnotics)

I have used some software that scans every sensor and any software and data stored on any drive.

but would like something a lot more thorough

such as, software that scans everything such as the voltages on any sensor and any possible piece of hardware,What is being stored and can be "rescued" from any device connected to the said computer/s

and so on.. does anyone know of anything like this?


A:PC Diagnostics ?

With all the different Hardware and Software manufacturers out there, and all the make and models of components within all the different computers, you won't find any 1 program capable of reading everything. Closest thing I have seen would be the Ultimate Boot CD which contains dozens of freeware programs for hardware diagnosis, but nothing really for software.

Read other 1 answers

 Attach.txt   12.81KB
 ark.log   1.69KB
  1 downloadsNot sure what the issue is -I have Malwarebyte and McAfee both running. McAfee keeps returning the error that real time scanning has been shut off and I have run Combofix many times before , but now it stops after doing a registry backup. Here is the dds.txt

DS (Ver_10-11-05.01) - NTFSx86
Run by breitert at 9:19:03.70 on Sat 11/06/2010
Internet Explorer: 8.0.6001.18975
Microsoft? Windows Vista? Business 6.0.6002.2.1252.1.1033.18.2045.1196 [GMT -5:00]

SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32�... Read more

A:KWM Diagnostics

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 28 answers

HI,i did a diagnostic scan with pc doc pro 4.2 trial because my computer is running slow even though ive used 30gb out of 140gb,
it said i had 122 interface problems & 195 class id problems (noted severe) and 418 empty key problems.
this has freaked me out as i also run win aso registry optimizer 3.0 weekly but never get that amount of problems.
can i trust pc doc pro to fix all of these problems and will it make any difference as i will have to buy the program but i just want my computer to be running optimum.thank you very much as im totally scratching my head as to what to do ..thankyou..adam haynes


adamski28 said:

HI,i did a diagnostic scan with pc doc pro 4.2 trial because my computer is running slow even though ive used 30gb out of 140gb,
it said i had 122 interface problems & 195 class id problems (noted severe) and 418 empty key problems.
this has freaked me out as i also run win aso registry optimizer 3.0 weekly but never get that amount of problems.
can i trust pc doc pro to fix all of these problems and will it make any difference as i will have to buy the program but i just want my computer to be running optimum.thank you very much as im totally scratching my head as to what to do ..thankyou..adam haynesClick to expand...

Read other 3 answers

I was on a game when I got a BSOD (Blue screen of death.) I ignored it as you usually get them every now and then. I restarted as usual and I opened a program and it crashed; I opened it again and it came up with another BSOD with the error of 'System service exception' when it rebooted, it came up with HP Diagnostics UEFI. I was going to reboot when I thought I should test it as the laptop is around 2 and a half years old. It came back with Memory Slot 2: Bottom slot right failed the memory test (RAM) and Hard Drive 1 component test failed. I am slightly worried as there is only 1 HDD on the laptop and I don't want to lose half of my RAM. Does anybody know what I should do?

A:HP Diagnostics- What do they mean?

nw89192 wrote:I was on a game when I got a BSOD (Blue screen of death.) .... It came back with Memory Slot 2: Bottom slot right failed the memory test (RAM) and Hard Drive 1 component test failed. I am slightly worried as there is only 1 HDD on the laptop and I don't want to lose half of my RAM. Does anybody know what I should [email protected] Please backup your files/data and replace failed components. HEAT (playing games) killed the machine. Regards.

Read other 1 answers

I have a few questions about diagnostics.
I have a Samsung HD Can I use Seagate SeaTools for its diagnostics?
If not, I need some help on forming a diagnostic CD for Samsung.

A:HD Diagnostics


Get your whole system checked here (free)

Read other 2 answers

My Hp probook 4540s used to ave advanced diagnostics but now only has hp diagnostics with the option of hard drive check and memory check and nothing else.

A:HP diagnostics

JA8231 Hello;Allow me to welcome you to the HP forums!Wish I had good news for you, but I don't ... The UEFI diagnostics you refer to are linked to the Win8.1 page for your PC, but NOT to the Win10 page: http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229456&swLangOid=8&swEnvOid=4158 This could be a simple oversight by HP, in which you could then download and install the diagnostics from the Win8.1 page.  Or, it could more likely be that those do not work in Win10 -- in which you're then out of luck. My suggestion is to try downloading and install them anyway, they might just work.Good Luck

Read other 1 answers

so after i have run the windows memory diagnostics i have determined that i have various ram errors. what i would like to know is what dos programs i could use to rectify my problems thanks.

A:ram diagnostics

It takes quite while, best to do it overnight

Read other 2 answers

Is there anywhere I could download iso file - Seagate Diagnostics for dos or linus and burn on cd or dvd?

The program so I can check for errors and fix them for Seagate Hard drives when it boots up on the DVD or CD rom drive..

Like they have for Life Guard Diagnostics for Western Digital hard drives.
Can I still use Life Guard Diagnostics for Seagate hard drives or are they only specific for scanning and fixing Western Digital Hard drives ?


A:Seagate Diagnostics on cd or dvd

This guide here:

How to perform a Seagate's Seatools Test | Tech Support Forum

Read other 9 answers

Since dropping Norton, I am without a system diagnostic program like "Win Doctor". Can anyone suggest a program that will safely do the same thing? It doesn't have to be free. It just has to work. I'm running XP SP2.

A:System diagnostics

Read other 8 answers

I have a Pavilion 17-f010us running Windows 10. I want to run a hardware diagnostic on it, but can't seem to figure out how. On older models running Windows 7 and below, I used to be prompted to hit a specail key during power-up (ESC or F10, etc.) which would take me to a boot menu where I could enter the BIOS or run a diag utility. Can anyone tell me how I'd do it on this one? Thank you in advance.

A:Hardware Diagnostics

Hi, Shutdown the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  From here, you should be able to select the Diagnostic Menu option ( f2 ). Regards, DP-K 

Read other 1 answers

I downloaded hp pc hardware diagnostics UEFI and dont know how to open

Read other answers

Are there diagnostics that can determine if the Bluetooth Radio hardware is working properly?

I cannot get a new Microsoft Sculpt Bluetooth (dongle-less) Mouse to be recognized after putting it in discovery mode.

My phone can see the mouse, so I'm pretty sure the mouse is not broken.

The computer cannot see the phone, so I'm pretty sure that something is hosed with the computer hardware or the O/S, but all the drivers seem to be in order.

Windows 7 x64 Ultimate.
ASUS P8H67-I Deluxe m/b.
Qualcomm Atheros Communications Port_#0004.Hub_#0003

The ASUS m/b has built-in Bluetooth, and the ASUS Bluetooth drivers are up-to-date and the Microsoft Bluetooth Enumerator is up-to-date, and both are enabled and "working properly", and the Bluetooth icon is in my system tray.

I can see the Bluetooth Radio blinking on the back of the m/b.

Here are the current settings.

[x] Allow Bluetooth devices to find this computer
[x] Allow Bluetooth devices to connect to this computer
[x] Alert me when a new Bluetooth device wants to connect
[x] Show Bluetooth icon in the notification area

[ ] Turn off the Bluetooth Adapter


Read other answers

Hi guys i need some help i am currently running my i7 with these settings and its almost there!

20 Passes or Intel Burn test pass every time
prime95 small fft only checked for 1-2hrs but thats fine
playing games is fine

but when i come to encode this one film with handbrake i get a bsod every time and im not sure if its my oc heres my set up hope you can help....

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[181]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1451MHz]
UCLK Frequency.........................[2903MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.22500]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.23125]
IOH Voltage............................[1.20]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.66]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC.......... Read more

A:i7 920 BSOD Diagnostics


Please follow these instructions: http://www.sevenforums.com/crashes-d...tml#post836073

Post the resulting .zip file here

There is a possibility that a driver is at fault, but it is far more likely that it is your OC.


Read other 4 answers

Wanted to make sure I described the situation correctly.
I have Windows installed on a single Hard Drive computer with RAID selected (don't ask me why that's how I received it)
I have a Kingston SSD. 
ePSA passes.
Dell Diagnostics Long Test gives a "S.M.A.R.T. Wear Level use warning" on the SSD
Kingston's diagnostics software reports no errors on both short and extended S.M.A.R.T tests.
I don't see anything wrong with the laptop, except I have now started imagining sometimes Windows is slow to boot up. Otherwise laptop runs great.
So how can I reliably discover if my SSD is dying or not given two conflicting reports? Should I trust Dell's Diagnostics over the manufacturer (Kingston)?

A:SSD Diagnostics Warning

Does the Kingston test note anything about "wear" or how much life is remaining?
I have Samsung and Intel SSD's.  Their diagnostic programs also include the health of the SSD and the Intel even includes how much life is left.
With a single boot drive, you should change the BIOS to "AHCI" (default BIOS setting for most PC's).  This may have an affect on the boot time.

Read other 2 answers

I need some help:
I accidentally shut down the internet during a "dell diagnostics test" which closed everything down in the middle of running the test.  It was running slow so I had to restart.  Just wondering if that hurt anything on the computer?  Not sure how bad it is for restarting in the middle of a diagnostics.
New to PC's, so any reassurance or help would be great.

Read other answers


Is there a way to check the health of one's monitor?

When I boot up, the Windows logon screen is very wavy. It is only then that it is wavy. The picture stabilizes immediately after and stays stable. I am using an IBM monitor that is about eight years old. I am thinking that because of its age, this may be a concern.

I would appreciate your opinion.

Thank you.


A:Monitor diagnostics ?

Read other 6 answers

I recently ran diagnostics on my laptop and I've received a ln error message saying my hard drive has an issue. The error code is 2000-0142. What do I do now?

Read other answers

I have been having some minor issues with Windows XP lately, and would like to ask if anyone knows of any good checkup/diagnostics/tuneup software that can locate and repair problems within Windows XP? Thanks

A:Checkup / Diagnostics

Read other 8 answers

If a PC freezes, and nothing you do can bring it out of the freeze where all you can do is force it to shut down so you can re-start it... is there a log in Windows where you can go to see if there is an error code of some kind that can hopefully provide a clue as to why the system froze up?

A:PC Freeze Diagnostics

If anything it would be in your event viewer, but I would guess you will not find anything but "unexpected shutdown"

What are you doing when the PC freezes?

Read other 9 answers

I can't find the WD Data Lifeguard CD download anywhere on their site, only here now: Data Lifeguard Diagnostic For Western Digital Drives

The more direct Download link there I've bookmarked is Western Digital Data Lifeguard CD ISO (extract first). Please advise if there is a reason not to use this link.

What could explain why a major tech company would only offer bootable floppy diagnostics for all of their drives old and new? I mean they literally repeat the floppy download on every single model's Downloads page. Does that strike anyone else to be as mammoth as Support incompetence can get?

A:Where did WD links to CD Diagnostics go?

Hey Greg,

It seems that you have to look up the model number at WD for the drive first before seeing the downloads for Data Lifeguard.WD Support / Downloads / Select Product
Here's an example:

WD Support / Downloads / SATA & SAS / WD VelociRaptor

WD Support / Downloads / SATA & SAS / WD VelociRaptor

Read other 3 answers

Hello .... this is my first posting after finding this great website resourse and a search of the archive still leaves me uncertain about the compatibility of manufacturer supplied diagnostic programs for external USB hard drives.

Do these diagnostics (like SeaTools) fully work on external USB hard drives?

I've often used these manufacturer supplied diagnostics on my internal IDE or SATA HDs with no problems in getting the diagnostic program to recognize and perform all the various tests.

However, for my external HDs, only the Generic tests are available to me with SeaTools for Windows (i.e. SMART test or Info Report are shown to be not supported on my Seagate and Maxtor external drives). And booting Seetools from a FreeDOS bootable CD will not even recognize these USB drives at all.

Recently, I purchased and placed two new 500GB HDs into external USB enclosures:

1. A Maxtor Basics SATA II/300 that generates very loud annoying clicks while seeking and;

2. A Seagate ST350064 Ultra/100 which has a constant high pitched whine (that drives me nuts).

I've tried different enclosures and also no enclosures with no reduction with regards to the noises.

The SeaTools Windows Version for Windows XP Pro SP2 does see them and can perform the Generic Tests that report no problems.

Am I correct in assuming that I'll first need to remove them from the USB enclosures and connect them on the IDE and SATA connectors on my desktop unit before I can ... Read more

A:Ext USB HD Diagnostics Questions

The Seatools disc: http://www.seagate.com/www/en-us/support/downloads/seatools

SeaTools for Windows
SeaTools for Windows has replaced SeaTools Online and PowerMax. SeaTools for Windows is a comprehensive, easy-to-use diagnostic tool that helps you quickly determine the condition of the disc drive in your external hard drive, desktop or notebook computer. It includes several tests that will examine the physical media on your Seagate or Maxtor disc drive and any other non-Seagate disc drive.

SeaTools for Windows tests USB, 1394, ATA (PATA/IDE), SATA and SCSI drives. It installs onto your system. SeaTools for Windows is completely data safe.Click to expand...

Although I don't like those sounds
I would suggest that you coninue to make backups to external Media
If the USB Drive is your backup Media, then at least you have the backup in two areas

Read other 5 answers

Dell has offer online diagnostics but i face some problem during the process. I have install the Dell System Detect in my pc that request by the website but still cannnot run the process and keep stuck at there.

Anyone know how it work, need help. Thank and appreciate your reply.

A:PC Online Diagnostics

I just bought a new Dell laptop and can't get system detect to work either.

Read other 4 answers

Any Internet and Connection Trouble Shooter Wizards out there ?I can use your assistance !Could you determine what the fix is for the Failure ?Did a System Scan from Network Diagnostics ;Show Saved Files Internet Service Default Outlook Express Mail POP3.snip.net / SMTP.snip.net FAILED InBoundMailPort = 110 InBoundMailServer = POP3.snip.net (FAILED)Pinging POP3.snip.net [] with 32 bytes of data:Destination net unreachable.Request timed out.Destination net unreachable.Request timed out.Ping statistics for Sent = 4, Received = 2, Lost = 2 (50% loss)Approximate round trip times in milli-seconds:Minimum = 0ms, Maximum = 0ms, Average = 0ms InBoundMailType = POP3 Successfully connected to POP3.snip.net port 110 OutBoundMailPort = 25 OutBoundMailServer = SMTP.snip.net (PASSED)Pinging SMTP.snip.net [] with 32 bytes of data:Reply from bytes=32 time=208ms TTL=208Reply from bytes=32 time=203ms TTL=203Reply from bytes=32 time=203ms TTL=203Reply from bytes=32 time=187ms TTL=187Ping statistics for Sent = 4, Received = 4, Lost = 0 (0% loss)Approximate round trip times in milli-seconds:Minimum = 187ms, Maximum = 208ms, Average = 200ms OutBoundMailType = SMTP Successfully connected to SMTP.snip.net port 25 Default Outlook Express News Not Configured Internet Explorer Web Proxy Not Configured Computer Information Computer System CPQ24444294201 ... Read more

Read other answers

Hello,   I have an Envy 15t laptop, and the original battery seems to not be functioning properly (the initial charge is quite low and the laptop does not last a long time).  I bought a new battery to remedy this issue, and I was hoping to do a calibration test.  While doing this, I ran into a strange problem.   For some reason, when I try to access the HP PC Hardware Diagnostics (by pressing ESC on bootup, followed by F2), it looks different now than it did before (I don't think it's because of the new battery before though, since I still had the old menu even with the new battery at some point).  The old menu used to be more of a GUI style, something like Figure 9 in the following link: http://support.hp.com/us-en/document/c03467259 Now though, under HP PC Hardware Diagnostics, it doesn't look like a GUI (it's more text based), and I only have the following options: Memory Test, Hard Drive Check, Language, Exit.  I no longer see a "Components" option, and I certainly cannot access the Battery option from within Components (since the Components option is missing).  Any ideas about why this is the case?  Thank you.

A:System Diagnostics

Hi, Try installing the latest hardware diagnostics uefi package on the following link. http://ftp.hp.com/pub/softpaq/sp76001-76500/sp76284.exe Regards, DP-K

Read other 1 answers

I recently tackled a friend's failed hard drive on her Dell Latitude D610 laptop. It's a 60 GB drive that was only booting to a blue screen of death. I removed the drive, hooked it up to a desktop, and ran Spinrite on the drive (for 2 days). It recovered a bad sector and gave the rest of the drive a clean bill of health.

Feeling pretty confident, I put the drive back in the friend's laptop, only to have it boot straight from the BIOS into Dell's diagnostic mode. I exited out of the diagnostic mode and tried to boot again. Same thing, no Windows screen, just straight into Dell Diagnostics. I've tried running the diagnostics (nothing wrong) and restoring the BIOS presets, but I can't get it to skip the Diagnostics and just boot into Windows. Any ideas?

A:How do I NOT run Dell Diagnostics?

Read other 12 answers

i just built my first rig and i was wondering if anyone new any good free/cheap hardware diagnistic tools

OS Name Microsoft Windows 7 Ultimate
Processor AMD Phenom(tm) II X4 965 Processor, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM) 8.00 GB
System Manufacturer Gigabyte Technology Co., Ltd.
System Model GA-880GM-UD2H

A:hardware diagnostics

I have several
Download memtest86 and test RAM

Video card stress test Video Card - Stress Test with Furmark http://www.ozone3d.net/benchmarks/fur/

CPU Stress Test www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Read other 5 answers

Ran iTunes Diagnostics>Results: Optical drive-"No audio CD found" ( there was a CD in my TSSTcorpCD/DVD SH-W162C drive)>clicked 'Help'>Got Itunes message "The URL could not be opened". How do I fix this URL problem?

A:iTunes Diagnostics

Are you certain your optical drive is working properly. Can you open the files on the CD manually?

Read other 2 answers

i finally located the file, exe, acc, dll to launch this program; when i click the diagnostics icon in EAX console this popup appears. have browsed for the setup.exe & diagnos3.exe for program & put in the acc file & click run, but still nothing. anyone have any advice how to type a command pathway to get this program to activate? thx

A:sb audigy 2 diagnostics

does anybody know how to fill in the blanks in the attachment?

Read other 1 answers

Hello all,               I have tried to run Lenovo's System Diagnostics and all I see is a message in red telling me that it is running and to wait. Well I waited for an hour and I suspect it was not running at all.I never had to wait this long. Why is this and it is not acceptable?

Go to Solution.

A:System Diagnostics

Hi rjordan393 , 
Welcome to the Community Forums. 
Either that the LSC is not ok or it has encountered issue during the test that was not able to verify. 
Try to uninstall it from programs and features under control panel and download a fresh updated copy from the support site and see if that would work. 
Likewise for differential comparison you can also use similar test software such as this and this . 
Update us how things go. 

Read other 5 answers

Logfile of HijackThis v1.99.1Scan saved at 2:16:10 AM, on 11/28/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.5730.0011)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Alwil Software\Avast4\aswUpdSv.exeC:\Program Files\Alwil Software\Avast4\ashServ.exeC:\Program Files\Common Files\LightScribe\LSSrvc.exeC:\WINDOWS\system32\RioMSC.exeC:\WINDOWS\System32\snmp.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Webroot\Spy Sweeper\SpySweeper.exeC:\Program Files\Alwil Software\Avast4\ashMaiSv.exeC:\Program Files\Alwil Software\Avast4\ashWebSv.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\Explorer.EXEC:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exeC:\Program Files\Palm\HOTSYNC.EXEC:\WINDOWS\system32\ctfmon.exeC:\Program Files\Windows Media Player\wmplayer.exeC:\Program Files\Yahoo!\Messenger\ymsgr_tray.exeC:\PROGRA~1\NETSCAPE&... Read more

A:My Hijackthis Log-diagnostics

I see a clean log, I don't see any problems at all.
Can you explain to me what problems you are having please.

Read other 1 answers

I downloaded the hardware diagnostics sp79421   rev.  UEFI but dont know how to use them

Read other answers

I've had some blue screen errors in the past and I wanted to run some diagnostics on my hardware before I play any games on it. I ran the dell diagnostic tool that came with my pc, but it requires user input for the video card test. A lot of the questions aren't straightforward and so I could have gotten error due to this. Should I just run a third-party test instead? For the memory test...should I just run memtest86?

Also, when updating my ati catalyst drivers...is it okay to just install over an older set. I attempted to do clean install once, but ran into a lot of problems.

A:Hardware Diagnostics


Read other 3 answers

Other than scannow /f is there anything else built into Windows that will run a system check/diagnostics ? I suspect I have created a system that may have some wires crossed as far as performance goes ?

Or..will running a repair install correct/fix any issues in my current installation...and...assuming I do it properly per the tutorial...is there any danger of loosing documents and/or files after the repair isntall ?


A:Other diagnostics besides SFC for WIN 7 Pro 64 bit machine

Quote: Originally Posted by trinaz

Other than scannow /f is there anything else built into Windows that will run a system check/diagnostics ? I suspect I have created a system that may have some wires crossed as far as performance goes ?

Or..will running a repair install correct/fix any issues in my current installation...and...assuming I do it properly per the tutorial...is there any danger of loosing documents and/or files after the repair isntall ?


Wires crossed? SFC just checks your system files against a copy in stores and compares them.

A repair install will only help if there are damaged files which SFC should pick up.

There is always some danger of losing files/documents so it is always a good idea to backup, have a restore point, and an OS dvd.

Read other 1 answers

Throw me a bone on this one, does anyone know how to run diagnostics at startup on a HP ze4545us Notebook?

I thought it was F10, but it does not work.

Read other answers

I have recently started back my old computer with a new hard drive and 2 8800 nvidia gts graphics card. When i first started to boot my computer up i get the blue screen after it tells me to repair or start windows normally. Then it would restart and repeat the same process. If i select start normally it gets the blue screen as the windows 7 icon is appearing. For me to get my computer to start working or not get the blue screen i either have to pres DEL to go to the start up menu and boot from there for pres F8 to choose a boot device, then after a few tries it loads up. But whenever i turn my computer off it repeats the same process. It eventually turns on but today it took me about 10 minutes to keep trying and i dont know exactly what is wrong with my computer. Please help.

A:BSOD Diagnostics

Help please someone

Read other 13 answers

hi everyone

this is a little hard to explain, but when I opened up my start screen this morning a lot of different apps appeared,
most of them were performance and diagnostics apps. I used one to see if there were any problems with the memory
on my computer, after it had completed and told me that their were no problems, all of the apps disappeared.
Can anyone explain were the apps came from and why they all disappeared.

regards calmat

A:diagnostics apps

Hello Calmat,

Were they the Administrative Tools?
Administrative Tools - Hide or Show in Windows 8
If not, then please go ahead and post a screenshot showing them if they show again to see if it may help.

Hope this helps for now,

Read other 3 answers