Over 1 million tech questions and answers.

Network Error- Windows cannot access \\server.LAN.com\MySharedFolder Error code: 0x80004005 - Unspecified error

Q: Network Error- Windows cannot access \\server.LAN.com\MySharedFolder Error code: 0x80004005 - Unspecified error

The URL of a shared folder on the LAN, copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine. From DOS terminal:

Read other answers
Preferred Solution: Network Error- Windows cannot access \\server.LAN.com\MySharedFolder Error code: 0x80004005 - Unspecified error

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)



I'm using Win 7 Home ed. 32 bit. And when trying to update and save tags for my .wav files, directly from the Explorer window, I get this error 0x80004005 each time. And won't let me save/update my tags, of course.

Any idea what's causing it?

A:Unspecified Error code 0x80004005

Welcome to Seven Forums mrfreezzzz. Is this a problem that just started, and do you know when if so? If it just started, you can try a System Restore point from just before it began

System Restore

If no help, try a clean start to see if there is a conflict

Troubleshoot Application Conflicts by Performing a Clean Startup

You might try and edit the tag information in WMP

Add or edit media information in Windows Media Player

If you can edit there, it likely isn't a file permission issue, but more an Explorer issue. You could try on another user and see if the problem occurs on that user as well. If it does not occur on another user, you could try and fix the corrupted user

Fix a corrupted user profile

If none of the above help, you should also run the System File Checker

SFC /SCANNOW Command - System File Checker

Did you make any changes just before the problem began? Installed any new programs? Ran any optimization programs, etc?

Would you be able to copy the file to another windows 7 PC and see if you can edit it there?

A Repair Install is also an option if the problem exists on all users, and nothing else helps.

Repair Install

A Guy

Read other 3 answers

We have some shared folder from "Windows Server 2008 R2" server. I am trying to access a share folder called "Test" (\\abc\test)  from a Windows 7 Professioanl 32 bit Edition and received the below error.
"share access Error code : 0X80004005 Unspecifed Error"
I am able to open \\abc\test from Windows XP Professional SP3 Machien.
I tried the below troubleshooting steps from Windows 7 Professional Desktop
1. nslookup
Server : test.def.com
Address :
Name : abc.def.com
2.  Mapped Network Drive \\abc\test and i am able to open.
It was working without mapping the shared folder earlier. Please let me know the solution to open
\\abc\test with out mapping.
Boopathi S 

A:share access Error code : 0X80004005 Unspecifed Error

I would like to suggest you try the following steps to see what the result is:
 Disable the firewall temporarily for a test.
 Try to disable IP v6.
How to disable IP version 6 (IPv6) or its specific components in Windows 7, in Windows Vista,
in Windows Server 2008 R2, and in Windows Server 2008
disabled Requiresecuritysignature on Windows 2008 under lanmanserver:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Requiresecuritysignature registry value is set to 0,
and on Windows client under lanmanworkstation:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Lanmanworkstation\Parameters\Requiresecuritysignature registry entry is set to 0.Alex Zhao

TechNet Community Support

Read other 2 answers

Error Type:
Unspecified error
/1stsite/AddSheet.asp, line 29

What does this error message mean?
Here is line 29:
objRS.Open "Names", objConn, adOpen, adLock, adCmdTable

My values are defined as so:

Dim adOpen, adLock, adCmdTable, objConn, objRS

adOpen = 0
adLock = 1
adCmdTable = 2

set objRS = Server.CreateObject("ADODB.Recordset")
set objConn = server.CreateObject("ADODB.Connection")
objConn.Open "Provider=Microsoft.Jet.OLEDB.4.0;"&_
"Data Source=C:\MYDB.mdb;"&_
"Persist Security Info=False"

The table exists, database defined by objConn also exists, and I have exhaused my own diagnostic skills, can anyone help?

A:Error Type: <br> (0x80004005) <br> Unspecified error <br> /1stsite/AddSheet.asp, line

Ok, Ive realised what it was, some of my labels were defined under the same name as default ASP variables, therefore it was throwing a wobbly at having 2 labels of the same name denoting different functions, I have now renamed everything to have a unique name and it is now co-operating. I hape someone else finds this useful

Read other 3 answers

These days when I try to open a shared folder in other machines(including XP, Vista, 7, Server 2003/2008) from my own Windows 7 Ultimate pc, I get a Network Error dialog saying:

Windows cannot access \\machine\sharedfolder, error code 0x80004005, unspecified error.
It aslo failed with IP.  And I have disable the Firewall
But the other XP, Vista, Server 2003 and Server 2008 machines can reach each other and they even can open the shared fodler from my Windows 7.
It's too strange. Maybe you can give me some useful suggestion.

[email protected]??/??/????+????+????+all the context of the issue Hope Helpful | http://www.leoworks.net

A:Windows cannot access \\machine\sharedfolder, error code 0x80004005

In case this helps... I was having a similar problem on a new laptop (Toshiba) with Windows 7 Home Premium using wifi.  Accessing a share on an XP desktop "suddenly" stopped working.
It appears the issue is related to the Microsoft Virtual WiFi Miniport Adapter, which was evidently installed with a driver update around the first week of April.  Even though the adapter is disabled, it appears that any changes that you make to the
settings on your "normal" wireless adapter also need made on this one.  For me, this included enabling NetBIOS over TCP/IP (under IPv4 settings) and ensuring IPv6 was disabled.  Again, THE INTERFACE IS DISABLED, but these changes still
"magically" made my sharing work immediately.

Read other 88 answers

Hi everyone,

I was just helping a friend update their newly installed system running a Windows 7 Ultimate x64bit OS and have completed all Windows Updates. The Windows installation was from an image which I used to reimage the hard drive with the OS. When checking for software updates using Ninite it resulted in an error.

I honestly don't know if this could be a Windows problem, a Windows Update problem (something that could have gone wrong during/after) or could it be due to software?

Not sure if this is a normal error occurance. I've never encountered this kind of problem from a newly installed and updated system before. Any help and advise would be greatly appreciated.

A:Getting an 'Unspecified Error' - 0x80004005 for

Do you mean that attempting to install Ninite, it threw this error, or do you mean that it's installed already, and throws this error when attempting to install an update?
I don't see WU being in the list of offered 'clients' - although .NET 4.5.2 is, as are some other things possibly probably best left to WU.

Read other 6 answers

I have added file to make the xp genuine, but when i restarted i inserted my password, windows don t give me any chance to get in it displays this popup window:
"A problem is preventing windows from accurately checking the license for this computer. Error code: 0x80004005"

And I tried to get into safe mode after restarting but the F8 key allow me only to boot from cd/dvd or IDE ...

So please some one could help me with this ! Or shall I format? I only have files that I badly need


A:error code: 0x80004005 and can t access safe mode

You probably should have bought a valid license instead of trying to circumvent the licensing process.

We can't help you with this. You made your bed....

Read other 1 answers

anyone run this one before?
I am not currently using a WIFI device.

Error 16393
Log Name: System
Source: Microsoft-Windows-Bits-Client
Date: 12/8/2015 3:05:05 PM
Event ID: 16393
Task Category: None
Level: Warning
Computer: AllenTown
BITS has encountered an error communicating with an Internet Gateway Device. Please check that the device is functioning properly. BITS will not attempt to use this device until the next system reboot. Error code: 0x80004005.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<Provider Name="Microsoft-Windows-Bits-Client" Guid="{EF1CC15B-46C1-414E-BB95-E76B077BD51E}" />
<TimeCreated SystemTime="2015-12-08T21:05:05.441501000Z" />
<Correlation />
<Execution ProcessID="844" ThreadID="1104" />
<Security UserID="S-1-5-18" />
<Data Name="ErrorCode">2147500037</Data&g... Read more

A:How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?

It happens to all my machines, and their internet connections are fine. Seems to be a common problem, but it likely isn't really causing any issues other than to those of us that look in our event viewers all the time.

Read other 0 answers

Hi Guys,

Like the title says..

I can't enter a network through wifi (Acer Aspire/Windows 8.1).
It keeps saying that I don't have access to it while it works with a pc, but really need it on the laptop
I guess it has something to do with the settings

Hope someone can help me with this?

Read other answers

I have a GPO which i have set for only Vista machines in 2003 GPO..I do have a custom registry key which enables the link state setting in the registry, so that when you elevate say Notepad, you can still access mapped drive letters..I suspect this custom setting, is for some reason, hosing up any computer config gpo settings.. i have older gpo settings which i have recently changed in the gpo (ie: windows update server location).. they have not changed when i run the gpupdate /force command.. still old values..If i do rsop.msc, the computer configuration has an exclaimation mark and the error in the subject is in the the error information tab under "registry".If i look in event viewer, system.. i see "the processing of group policy failed because of an internal system error".. eventid 1125 and this code below..Any thoughts on how to fix this ?Log Name:      SystemSource:        Microsoft-Windows-GroupPolicyDate:          10/27/2008 10:19:32 AMEvent ID:      1125Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      vpc-x86vista01.domain.localDescription:The processing of Group Policy failed because of an internal system error. Please see the Group Policy operational log for the specific error message. An attempt will be made to process Group Policy again at the next refresh cycle.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"... Read more

A:Registry failed due to error listed below.. unspecified error (Vista GPO in 2003 server); Computer Config load

Please first check if the GPO is linked to the OU that contains the computers correctly.
If it links properly, please check if the OU has sub OUs, and the policies for the sub OUs conflict with the new GPO. Also check if the OU has parent OUs and the parent OU force the OU to apply the GPO settings of the parent OUs.
If the issue still occurs when all settings are proper, please run Group Policy Result Wizard in GPMC in the server, and try to find clues from the result. Also you may run "gpresult ?z > %userprofile%\desktop\gpresult.txt" in command prompt in one of the problematic domain member computer, and open the result "gpresult.txt" on Desktop, try to find some clues.

Read other 2 answers

I just got a new computer recently ( yesterday ) and I upgraded it to Windows XP Professional. I installed my favourite online game MapleStory that can be downloaded from the internet. I installed it and then tried to play it but a dialogue box came out saying error code: -2147467259 (Unspecified error). I tried uninstalling it and reinstalling but it couldn't work at all. I tried every way I can think of but it just doesn't work. Anyone knows how to solve this problem?

A:error code: -2147467259 (Unspecified error)

This is what it says on their website, but I have no idea what it means:

" The following error code is not from MapleStory.
Rather, it's from the Windows itself.

If you have a virus, hacking or macro programs, it can produce
various codes, so it's recommended that you delete those programs before playing the game."

I dont think they mean you should remove your antivirus software.

Read other 2 answers

These are the bluetooth headphones - Creative 51EF0450AA001 WP-300 Wireless Headphones: Amazon.co.uk: Electronics

I bought a cheap USB bluetooth dongle to enable my PC to connect to my bluetooth devices and these headphones don't work. My PC pairs fine with my phone so I don't think anything is wrong with the USB. It discovers the headphones when I try to add a bluetooth devices and recognises them as headphones but when I go to add the device I get this error:
"Adding the device failed resulting in an unknown error. The reported error code is:0x80004005."
I've had a look and I've read a few things about W7 not supporting A2DP but I don't really understand what to do about it.
Any help would be great, thanks!

A:Can't connect Bluetooth Headphones to Windows 7. Error code-0x80004005

maybe this link can help you.

how do you fix error code 0x80004005?


Read other 4 answers

Hey all. I downloaded from microsoft website sp3 for xp professional. Did not deactivate security software. Now there is a problem preventing windows from accurately checking the license for the computer. Since I don't have a disc how can I get back rid of sp3. I can get to safe mode but not into desktop. Thank you.

A:error code 0x80004005

1. Turn On your PC

2. Press F8 repeatedly and go to Safe Mode

3. Logon as per normal
(note: Administrator password is usually blank, but hopefully you know your password)

4. Allow the Desktop to fully load (answering "Yes" to continue into Safe Mode)
(note: This is just a long way of saying go to Safe Mode)

5. Click on Start - Run

6. Type in exactly: rundll32.exe syssetup,SetupOobeBnk (and click OK)
(note: one space, after "rundll32.exe " also the Oo are two letter o's in "oobe"; capitals and comma are important)

7. Wait a couple of seconds (although you will Not see any change)

8. Restart your PC normally (Start - Shutdown - Restart - Ok)

9. You are now able to go to Normal Mode again (For another 30 days !!!)

10.Once in Normal mode you can go to Add Remove Programs and Uninstall SP3 if you want.

Read other 1 answers

O&O Defrag 11 Professional Edition When I finish analyzing both my drivers in O&O Defrag 11 Professional Edition i get this error message.

Failed to save incoming report data from O&O Defrag Agent (0x80004005)

Please check whether you have full access rights to the folder
"C:\Documents and Settings\Bob\Local Settings\Application Data\O&O\O&O Defrag\reports" and it's subfolders.

The problem is, is that I can access that folder easily.

Help greatly appreciated!

A:Error code 0x80004005

welcome to TSG.

Why are you using a third party defrag tool? The built-in windows one is generally better, as the OS is what has to access the data anyhow. Third party defraggers generally use a different algorithm and, as such, will make the OS think the drive is fragged. When that happens, the OS puts more strain on the HD.

As for O&O, however, I have no clue. If you can access it, maybe the app can't. Maybe change the path to the one on in program files. Again, I gotta state that I do not use third party defraggers.

Read other 3 answers

When I try to burn the Windows 8 developers build onto a disk I get error code 0x80004005.
Any Idea how to fix this?

A:Error code 0x80004005

Read other 9 answers

I have a problem with windows validation and would really like some help.
I built a computer about a month ago, and installed a copy of Windows XP Professional. It is a legitimate disc not a pirate copy. I have also installed many software programs including AVG antivirus, Office etc


When I turned my computer on today it boots up but when I try to log in I get a popup saying:
*Windows Product Activation* This copy of Windows must be activated with Microsoft before you can log on. Do you want to activate Windows now?
I have the option of Yes or No. If I click No it goes back to the Log in Screen and I don’t get much further. If I click yes I get another pop up window saying:
*Windows Product Activation* A problem is preventing Windows from accurately checking the license for the computer. Error Code: 0x80004005.
This only lets me press okay and then I am back to square one. I can’t log into my account.
(I know I should have activated before)
A quick browse of the internet told me that maybe some of my registry files might be corrupt. After booting up the Recovery Console from the Windows XP Professional disc I renamed the following files:
I did this with the hope I could log into the CD, and do the following:
• Expand licwmi.dl_ C:\WINDOWS\System32
• Expand regwizc.dl_ C:\WINDOWS\System32
• Expand licdll.dl_ C:\WINDOWS\System32
• ... Read more

A:Error code 0x80004005

Read other 14 answers

i need help what should i do i just bought an ipod touch and i need newer version of itunes and that message pops up i have DSL hp pavilion dvx6000 series i have windows vista

Read other answers

i need help!! i'm at wits end with error code 0x80004005

im working on a Dell Inspiron 1150 with windows XP Home. basically, the product key files got removed in the process of cleaning up the hard drive. i did the steps shown on the website http://support.microsoft.com/kb/914232
when i got to the part where i had to type the expand commands, i kept getting an ACCESS DENIED message after each command. (for example: EXPAND licwmi.dl_C:\WINDOWS\System32, then id press ENTER, the message would read: ACCESS IS DENIED)

i went ahead through all the steps but i still cant log on to normal mode. i get to the logon screen, put the password, and it gives me an empty message box (it just has a red X). after i hit OK on it, it begins to start up but immediately logs me back out.

i can still get onto safe mode but thats about it. i run the registry cleaner on CCleaner. I get an ActiveX/COM Issue on regwiz.dll, licwmi.dll, licdll.dll, licwmi.dll, licwmi.dll and a Missing MUI Reference on LaunchPad.exe. the fix for these is to delete them, but i dont know if i should.

well this is my dilemma. i hope somebody can help me. i really need it. thanks.

A:error code 0x80004005

if u ran a registry cleaner that might be why u are having problems. we dont advise anyone to use them because they can cause a lot of problems as u have seen.i think u might have to reinstall the operating system again and hope that all goes well.hope this helps u.

Read other 1 answers

certain boxes wouldent show up in steam skype or McAfee and i did some digging and every time i would run this in the run program i would get this the module "jscrpt.dll" was loaded but the call to DLLRegisterServer failed with error code 0x80004005 help i cant use skype steam or McAfee i have win 7 64 bit

A:help i am getting a 0x80004005 error code


Uninstall McCrappee completely - its as useful as an ashtray on a motorbike, and is a major cause of many of the problems we solve on these forums - replace it with MSE.

Has this cured your problems?


Read other 2 answers


I bought a cheap USB bluetooth dongle ( Hype HY-981 Ultra-Slim Bluetooth Stereo Headphone ) to enable my PC to connect to my bluetooth devices and these headphones don't work. The computer discovers the headphones when I try to add a bluetooth devices and recognises them as headphones but when I go to add the device I get this error:
"Adding the device failed resulting in an unknown error. The reported error code is:0x80004005."
Can someone help me to solve this problem because I don't have any idea what to do to fix it.
Thanks in advance for any help !!!!

A:Error code-0x80004005

Have you done a search here?

Perhaps these might help..


Adding a Bluetooth Device gives 0x80004005 error

Read other 4 answers

I've got an error at my Windows XP I used Windows Repair from my windows xp CD, then after restarting the PC, after the "WELCOME" screen, there is a textbox: "A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x80004005" And it doesn't let my entering windows. I tried to use system recovery in safe mode but it 'said' that i don't have recovey points.... If someone can help me with this problem here is my email [email protected] or post something THX ALL

A:Error Code: 0x80004005

Hello rock dreamboy,

See if the following article will help.


Read other 1 answers

When I try to use Windows Update I get this error code. What does this mean and how can I fix it!?

A:Error Code: 0x80004005


A 0x80004005 is a typical warning indicating you have no Internet connection (while you may have) because the update service is having problems establishing a perfect two-way communication with Microsoft servers.

There are reasons, but first some questions:

Is your XP genuine and validated?
Do you run a proxy?
Any malware/viruses that you've scanned for recently? (best to do so)
Do you have a good network connection or is it patchy or with problems from the ISP side?

Read other 12 answers

I am getting this error when I am install Windows 7: Windows could not format a partition on disk 0 - error code 0x80004005 during a new install of Windows 7. I have tried both Home Premium x64 and Enterprise x64. Both falling into the same error: I've removed all partition using gparted, and created a single primary partition, but I keep getting that error. Here is what happens:
PC boots from it, then goes to this screen: http://1.bp.blogspot.com/_CsM3xxjCuyg/SWPEBv_Ry2I/AAAAAAAAAwQ/gWFT19O3ayw/s1600-h/install_step4.jpg

After that, it just starts copying files: http://4.bp.blogspot.com/_CsM3xxjCuyg/SWPEO633HPI/AAAAAAAAAxA/D5BAJXjsqcY/s1600-h/install_step10.jpg

Which means it COMPLETELY skilled these steps: http://3.bp.blogspot.com/_CsM3xxjCuyg/SWPEB9CCyeI/AAAAAAAAAwY/Gaa9S-9Fwpc/s1600-h/install_step5.jpg http://3.bp.blogspot.com/_CsM3xxjCuyg/SWPEM5-yhWI/AAAAAAAAAwo/S1G5kQoNhHw/s1600-h/install_step7.jpg http://1.bp.blogspot.com/_CsM3xxjCuyg/SWPENZKaAzI/AAAAAAAAAww/xG7Nqd2416A/s1600-h/install_step8.jpg http://4.bp.blogspot.com/_CsM3xxjCuyg/SWPEONxCNsI/AAAAAAAAAw4/JjOpnEFup8w/s1600-h/install_step9.jpg
Which means I can't select which disk or partition I want Windows 7 on.
After about 5 seconds, the error pops up: Windows coupld not apply the unattend answer file's <DiskConfiguration> setting
Before I removed all partitions, I got this message during installation: Windows could not format a partition on disk 0 - error code 0x80004005
I then reboot back o... Read more

A:Windows could not apply the unattend answer file's <DiskConfiguration> setting - error code 0x80004005 during a new install of Windows 7

Please copy the DiskConfiguration part from your answer file to your post, we will see if there is any problems.
Can you manually format the disk during installation, but without using gparted? If it can be formatted manually, how does the unattended installation work when you try it again?Arthur Xie - MSFT

Read other 3 answers

First a bit about me - so you know roughly how to pitch replies...

I used to be able to fly NT4, if only by the seat of my pants, but with 2k, I dropped out to Linux.

Now the problem: an in-law got his computer eaten by a virus, probably imported by one of his kids. I'm supposed to know about computers so the problem got onto my desk!

Starting point: I could log in as the guy (no p/w) but there was nothing on his desktop except the wallpaper.

I could run stuff, but only by the 3 finger salute, then using the 'Start new application' tab in task manager.

First off I ran the Norton anti-virus software he had installed. That found 4 infections, 3 that were automatically fixed, but the other one needed 'manual' intervention - so I intervened manually.

Next I re booted (same 'nothing' outcome) and ran the anti-virus again: nothing found that time, so I thought is was safe to move on.

I used the XP (Home, inc. SP3) CD to do a repair.

That seemed to work, but booting now requires a check on the (100% valid) product number.

This is where Catch 22 strikes!

On my network, I use explicit IPs - so I know what I'm trying to debug - but, I think, his system uses DHCP(? - automatic assignment of IP numbers), so it wasn't a big surprise when XP couldn't connect to M$. I took the box back to his place, in the hope that whatever settings he had had would work there.

No such luck. I still got the 0x80004005 error.

Since the in-law is computer illiterate, ... Read more

Read other answers

Troubleshoot problems - System and Security

1,System Maintenance
4,Search and Indexing
5,Windows update
When I click on any of these the box comes up with next to click and when I click a box comes up saying.
An error occured while trouble shooting, the troubleshooting wizard can't continue.

View error details:
Package ID: Maintenace diagnostic
Path: C:/Windows/diagnostics/scheduled/maintenance
Source: Engine
User: MYPC/Peter
Context: Restricted

This happens on all of the 5 headings, I am running Win 7 home 32 bit any help and assistance to get rid of this 0x80004005 error code will be appreciated.
Many thanks.

Read other answers


From past two months i am facing the problem in windows server 2008 standard that my two servers are restarting daily same time in afternoon session and evening session with blue screen error and error codes will be codes 1. 0x0000007e(0xc0000005,0x889da413,0x8a5dcaa0,0x8a5dc79c)
and error code 2: 0x00000050(0xb0425000,0x000000001,0x8186dd80,0x00000000).

For this I was reinstalled my operating system but still facing same issue.

we are not checked all possible causes but still no solution for the same.

Please suggest me....

Read other answers

I get error code 0x80004005 when i try copy microsoft word document from my old window 10 computer to my windows 10 computer. I want help on how to delete file or resolve the problem.Serial number #: 5CG641NYN, PRODUCT # YOF93AV

Read other answers

When I tried to load my copy of Microsoft Minesweeper this morning, it failed to load, and when I clicked on the icon, nothing happened. I then tried to uninstall and reinstall the app, but I get a page that says I should "Check your connection", and quotes error code 0x80004005. I run win10 on an acer aspire E15.

Any ideas?

Read other answers

Hi my friends
Everything was working well until the company changed the ISP from Frontier to Spectrum. All computers could be connected to sinology disk station d1515+. Now two computers can not connect to sinology disk station. (Network Error
Code 0x80070035). I have tried the following solution:
1) I can see sinology disk station under NETWORK. I can ping it and it respond.
2) Network discovery is turned "on"
3) I have removed "Antivirus Software"
4) I have enabled NetBIOS over TCP/IP
5) I deactivate "Firewall (off)" at a moment
6) I can access "sinology disk station" via Internet Explorer 11
Please if anyone can tell me what to do?

Thanks in advance

Read other answers

Everytime try to burn an ISO file to a blank CD, I always set it to verify before finishing the disc image burning process and I always get the warning that the disc image didn't burn successfully and it has Error Code: 0x80004005.

I've tried burning disc image on a number of blank CD's but to my dismay, they all get wasted upon getting this error. This doesn't usually come before, unless the discs I used were of poor quality. I've tried different discs with different brands, different ISOs and just now a re-writable CD to no avail. I've been using the built in ISO disc image burner on Windows 7 and I also tried ImgBurn but they both report some sort of error on the disc verification process before the completion of the disc burning. I don't know how this is supposed to be. I was gonna burn some Linux ISOs but they just won't burn well.

A:ISO disc image burning always displaying Error Code: 0x80004005

There are 3 points of failure: The burning program, the disks, the burner.

You test to see if you get the same error using a different burning program (check).
You test to see if you get the same error using different media (check).
You test by using a different optical drive.

Optical drives are cheap (both meanings) and the heads can be knocked out of alignment too easily. Once that happens there is little to no chance of repairing it. It is just easier to get a new drive.

EDIT: be sure to try cleaning the drive. Use compressed air or vacuum to try and get any dust or hair out of the compartment (carefully). NEVER try to clean the lenses by touching them.

Read other 3 answers

I have read about this issue on many Vista and 7 forums. No one has since answered why the O/S suddenly won't open zip files.
A user received a zip attachment in outlook with two .csv files in it. Whether she tried to open or save them from the e-mail message or open  them or extract them from the saved zip file, error code "0x80004005: unknown error" gets thrown. I was able
to open the same files on a Windows XP machine without any issue, so the files are not corrupted. The Windows 7 O/S is giving no other signs of an issue. I am looking for a solution other than "go get another company's product to do what 7 should natively

A:.Zip files fail to extract or open, error code 0x80004005


1- Run command prompt as Administrator
   cd C:\windows\System32
2- Type the following command and hit Enter:
             regsvr32 jscript.dll
3- Type the following command and hit Enter:
             regsvr32 vbscript.dll
4- Run the installer again.


Read other 13 answers

When using Mozilla Firefox recently I encountered the problem of getting the following response from two separate secure https login servers:
1) Gibson Research Corporation, Internet Security testing (for Shields Up!) at:
https://grc.com/x/ne.dll?bh0bkyd2, and
2) my ISP WebMail server at:

Error Code 500.
Message: Internal Server Error.

I soon discovered that when installing the software supplied by my ISP, they caution the following when using a non-IE browser during the installation process, and instruct you to setup the connection settings for localhost:8080 with regard to their dial-up accelerator, otherwise the accelerator may not work properly.

This conflicts directly with the solution to the above Error Code 500 problem:

The solution is as follows with Mozilla Firefox:
Pull down: Tools->Options->General->Connection->Connection Settings
Choose: Direct connection to the Internet

-- Tom

Read other answers

error in dll.Scan_Start Unspecified Error
I get thes message now Whenever I try to run Spyware Doctor. Can anyone tell me what is going on here, and how to correct it. Thanks, any help is greatly appreciated.

Read other answers

Good afternoon all,

After trawling Google for solutions I'm not sure what to do.

Brand new comp running Windows 7 and using a wireless network adapter. The network signal is saying I'm connected and that there is internet access, but there is not. I've tried a different browser and nothing. Then an exclamation point pops up saying there is no internet access. I've troubleshooted using Windows and its getting the "DNS server is not responding" error. The internet was fine and then did a Windows update.

I've tried cmd release, flush, renew to no avail. I've changed the DNS address to 208-67-222-222. Uninstalled the wireless adapter, restarted and reinstalled. Unplugged the modem and router and then reconnected.

Sometimes internet access will be restored, but minutes later the DNS server pops up again.

I did a system restore to before the updates as a last ditch effort.

Thank you in advance!

Read other answers

Good afternoon all,

After trawling Google for solutions I'm not sure what to do.

Brand new comp running Windows 7 and using a wireless network adapter. The network signal is saying I'm connected and that there is internet access, but there is not. I've tried a different browser and nothing. Then an exclamation point pops up saying there is no internet access. I've troubleshooted using Windows and its getting the "DNS server is not responding" error. The internet was fine and then did a Windows update.

I've tried cmd release, flush, renew to no avail. I've changed the DNS address to 208-67-222-222. Uninstalled the wireless adapter, restarted and reinstalled. Unplugged the modem and router and then reconnected.

Sometimes internet access will be restored, but minutes later the DNS server pops up again.

I did a system restore to before the updates as a last ditch effort.

Thank you in advance!

Read other answers

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!

Read other answers

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

and sfc /scannow

copy/paste the results please.


Read other 1 answers

Hello every body.
my pc have a windows vista home premium with 3 derives (C:, D:, F. from one months ago until now, it starts showing this message to me when i want copy, delete, or install any file on my F: derive: "the disk structure is corrupted and unreadable". i should add that almost every other day it shows this message to me and some times with restarting the pc the problem solves but some days latter again it shows this error.
so i try to do a CHKDSK check at windows startup for my F: derive but at stage 3 it shows this error message: "unspecified error occured".
what should i do?

A:CHKDSK error: unspecified error occured

You need to perform arel test your your hard drive. Chkdsk is not reliable for these situations
Test Hard Drive HD Diagnostic or this test Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

Read other 23 answers

hello everyone

i'm facing an issue with my windows server 2008 R2 Domain controller, i am trying to get windows update but i am getting the Error Code 80070005!! i know this code is for insufficient rights to perform such task!! (i am using the Administrator with
full permissions)
i have tried all possible solutions that i found online. i even tried the subinacl tool but nothing happened. i also removed the firewall and antivirus (uninstall).
i tried to install the WSUS on an another server, the WSUS detected all the PCs and servers that are on the network, and all units start to get the updates, only this server didn't get the updates (status: not yet reported) and i tried all possible commands
wuauclt.exe /detectnow /reportnow

wuauclt /detectnow

wuauclt /reportnow

/resetauthorization /detectnow , 
PS: i have 8 servers running the same win 2008 R2, only this server is not getting updates 

could you please assist me :(

Read other answers

error code 8024402f in windows server os 2012 r2

how to fix it...

Read other answers

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

Read other answers

I have not a great deal of network experience and am trying to connect a workstation with windows 7 pro to sbs 2003 server at my workplace. I have connected workstations with XP pro with no problem by changing membership of the computer name from workgroup to Domain.

Windows 7 Pro will not allow the change from workgoup to domain. I have tried setting IP Address both using Obtain IP Address automatically, and also setting them manually in network properties. This works for XP Pro using IP addresses for gateway and server from ipconfig /all. I have tried setting IP Addresses in 7 Pro but it does not work.

Error message is as follows:

The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "MIRACLEFLIGHTSFORKIDS.local":
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.MIRACLEFLIGHTSFORKIDS.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
- One or more of the following zones do not include delegation to its child zone:
... Read more

A:cant connect windows 7 pro to sbs 2003 server - error code 0x0000232B

mffk welcome to SevenForums
See if this will help

Unable to join 7 Pro to SBS 2003 domain - Microsoft Community

Read other 9 answers

in windows 7 server services are not enable .its showing error code 10

A:in windows 7 server services are not enable .its showing error code 10

Welcome to our forum vikramsuv.
We need some basic information about your system. These two tutorial will help you do that and putting in your My System Spec in the lower left of your every post.

By Brink:

System Info - See Your System Specs

By Kari:

Speccy - Publish Snapshot of your System Specs

Read other 3 answers

When trying to upgrade Windows 10 the the latest keep getting above error. Have done all the  micosoft support soluions from forums, plus aother web solutions but none work. Just wondered if any one here might be able to help.Have updated all drivers and cleared out temps.

Read other answers

Hey All-

I get the following while trying to do Windows Updates:


[Error number: 0x80004005]

The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.
For self-help options:

Frequently Asked Questions

Find Solutions

Windows Update Newsgroup
For assisted support options:

Microsoft Online Assisted Support (no-cost for Windows Update issues)

I've searched all over and done the suggestions from the following page: http://forums.techguy.org/windows-n...te-error-0x80004005.html?highlight=0x80004005

I'm running Media Center and it's genuine:


Diagnostic Report (1.5.0555.0):
WGA Data-->
Validation Status: Genuine
Windows Product Key: *****-*****-D2R7C-PBP3Y-B4G7M
Windows Product Key Hash: f1XvCFHavvybMcKYhNfsHQFgAmI=
Windows Product ID: 69831-640-1780577-45389
Windows Product ID Type: 1
Windows License Type: Volume
Windows OS version: 5.1.2600.2.00010100.2.0.med
ID: a463132c-192e-46c5-96ec-4ca2ff3dfc94
Is Admin: Yes
AutoDial: No
Registry: 0x0
WGA Version: Registered, 1.5.723.1
Signed By: Microsoft
Validation Diagnostic: 025D1FF3-222-80004005_025D1FF3-429-80004005_025D1FF3-269-80004005
Resolution Status: N/A

System Scan Data-->
Scan: Complete
Cryptography: Complete

Notifications Data-->
Cached Result: N/A
File Exists: No
Version: N/A
WgaTray.ex... Read more

A:Windows Update Error 0x80004005

Read other 12 answers

My Windows Mail will no longer receive mail. Upon opening I get the following error:
An unknown error has occurred. Account: 'mail.wctatel.net', Server: 'mail.wctatel.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x80004005

I get this error everytime I try to send/receive mail as well.

A:Windows Mail error 0x80004005 ??

Hi -

You need to login to your WCTA email account - http://www.wctatel.net/UI/Menu/Inter...6-2963214d5906

Regards. . .



Read other 6 answers