Over 1 million tech questions and answers.

Sending reported error 0x800CCC69 outlook 2016

Q: Sending reported error 0x800CCC69 outlook 2016

getting send receive error 0x800ccc69 with outlook 2016. I can receive but not send e-mail. I have associates in my office using same settings on Outlook 2016 without a problem. I have spoken with Microsoft numerous times-reset email accounts, etc and doesn't appear to be an issue there. My ISP doesn't have anything blocked so doesn't appear to be a router issue. I am able to send via webmail for my e-mail server Bluehost so server doesn't apper to be the issue. I'm down to checking my Netgear firewall Prosafe VPN Firewall FVS318v3. Any help would be greatly appreciated.

RELEVANCY SCORE 200
Preferred Solution: Sending reported error 0x800CCC69 outlook 2016

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Sending reported error 0x800CCC69 outlook 2016

Try to double-check your Outgoing Server settings. Especially the Username, and Authentication. You should be able to get the correct settings from your ISP.
It may also be helpful to know which type of e-mail you're setting up. Pop3, Imap, Exchange etc. etc.

Read other 2 answers
RELEVANCY SCORE 79.6

Hi I run Windows Vista Home Premium and Outlook 2007. I've set up POP3 access for Gmail and to download mail from mail.bigpond.com (an Australian ISP). Initial setup was fine and I can send test messages to myself.

Recently I've had trouble sending (but not receiving) email via Outlook. The following error message is shown:

Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) email server. If you continue to receive this message, contact your server administrator or Internet Service Provider (ISP).

This message occurs for both my email accounts.

If I reboot the computer, then sometimes the mail will be sent successfully. I've checked the "account settings" on Outlook- and they are exactly as those given by my ISP/Gmail. But when I click on "test account settings", the test message can't be sent.

What's going on?!
 

A:Outlook 2007 "Sending reported error"- can receive mail but can't send!!

Angela,

Refer to the earlier query in this section dated 10th April under heading " OE suddenly asking for Logon Password" which shows possible ways of overcoming this . I reckon it's server problem as I had it re-occur a couple of days ago . My Mail is Btinternet which started rejecting my outward messages. I know that BT uses Yahoo so Isubstituted "mail.yahoo.com" for "mail.btinternet.com" ( OE/Tools/Accounts/Properties/Servers) and it immediately started working . So whatever the ISP says it IS their fault and somehow their systems start rejecting things for no valid reason .
 

Read other 1 answers
RELEVANCY SCORE 76.8

I'm guessing that no one can fix this problem! Since none of the forum feedback I've found so far has helped. The error statement is seen in Outlook 2007 when I sent an email via POP3 account:

Task 'email address' - Sending' reported error (0x800CCC69) : 'The server responded: 550 IP address 86.176.168.5 in XBL'

The login details for the mail server are spot on. I've also checked all my other POP3 accounts and they all suffer the same problem.

The accounts have worked fine for several months. The only change has been the use of vodaphone mobile broadband. I installed it after my BT connection had trouble last week and ever since this problem has existing. My problem is definately linked to this since I also had the same problem 6 months ago and had to reinstall everything.

I'm coming close to a reinstalation of Microsoft Office and the loss of all existing emails. Please help if you can?
 

A:Who can fix error 0x800CCC69 in Outlook?

Read other 8 answers
RELEVANCY SCORE 76

I can receive my emails but cannot send any emails. I can only send emails via my webmail which is a drag as it will not let me add attachments. I get the error reports code (0x800CCC69) or similar. I am using AVG virus scanning software.
 

A:(0x800CCC69) error reports with Outlook

Read other 16 answers
RELEVANCY SCORE 75.2

In outlook when sending and receiving mail, all incoming mail comes in fine, but when outgoing mail is being processed, outlook gives an error message:

"Task 'RPM Mail - Sending and Receiving' reported error (0x800CCC69): 'Unknown Error 0x800CCC69'"

I've looked this error up on the Microsoft Knowledge Base, but have not found a relavant solution.
 

A:Solved: Outlook unknown error 0x800CCC69

Read other 14 answers
RELEVANCY SCORE 74.4

For 2 days have been unable to send email messages.I can receive but not send. On 1-24 I ran my Advanced Care Systems I did Diagnostic Systems all 4 ( Problems solved) I ran all 4 Maintain Windows it includeds a Resistry Fix (Problems solved) I ran AVG (no problems detected)I'm running Ad-aware as I type I ran my Secunia (No Problems) I called my IP said was Outlook express problem we did check the POP & smtl setting were OK I emptied Inbox, Outbox Sent box deleted items & still can't send email messages any other suggestions would it help if I uninstalled my AVG,Advanced Care Systems (A registery cleaner)my AD aware & reinstall later? Thanks K.K
 

A:Solved: Outlook Express Error message 0x800ccc69

This is an old knowledge base article, any brand firewall could cause this error
http://support.microsoft.com/kb/873022

.
Yes Uninstall AVG firewall, you may have to uninstall the entire AVG package.

If you reinstall AVG, just install the Anti Virus, not the firewall.

.
 

Read other 3 answers
RELEVANCY SCORE 73.2

Sending and Receiving' reported error (0x800CCC90) : 'Your incoming (POP3) e-mail server has reported an internal error. If you continue to receive this message, contact your server administrator or Internet service provider (ISP). The server responded: ??RR problem retrieving message.'
 

Read other answers
RELEVANCY SCORE 73.2

I am running a 6 PC peer to peer network at work with one person in particular who pays no attention to the dangers out there especially when it comes to e-mail attachments.

Since coming back from our Seasonal vacations our e-mail accounts are being blocked by our ISP due to a suspected mailbot with this error message:-

"Sending' reported error (0x800CCC67) : ' The server responded: 421 4.0.0 Intrusion prevention active for [41.145.22.134]'"

I have on one PC run 'Malwarebytes Anti-Malware', SuperAntispyware, ExterminateIT and Combofix' I want to add that your instructions for running Combofix were a great help as I rate myself as "mid stream computer literate."

Anyway the problem disappeared for one day and promptly returned this morning and would appreciate any help in identifying the infected PC and clearing the infection, and will the cleaning last long enough for me to clear the other machines 1 day at a time?

5 of the PCs are running 'AVG free' and 1 is running Avira Pro. (I think - bosses laptop and I don't have access at the moment)

I was requested to attach a DDS log (Hope I've been successful) and the ComboFix log:-
ComboFix 12-01-19.02 - Geoff Ogden 20-Jan-12 8:11.2.2 - x86
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2039.1441 [GMT 2:00]
Running from: c:\documents and settings\Geoff Ogden\Desktop\Downloads\Virus Tools\ComboFix.exe
AV: AVG Anti-Virus F... Read more

A:Sending' reported error (0x800CCC67)

Hi - I have scanned all the PCs on the network and have zipped and attached the logs.

The MunyaPC would not complete the ComboFix scan and re-booted after about step 32, consequently there is no ComboFix log.

The 'mailbot' is still present as our mail server was blocked again this morning.
 ChecotiPC.zip   10.41KB
  1 downloads

 DavidPC.zip   7.29KB
  0 downloads

 GeoffPC.zip   17.06KB
  1 downloads

 MoiraPC.zip   15.16KB
  0 downloads

 MunyaPC.zip   4.76KB
  1 downloads

 TammyPC.zip   8.28KB
  0 downloads

Read other 15 answers
RELEVANCY SCORE 73.2

Hello

When clicking send/recieve, I get a sending error as follows:-

Task Next Level - Sending' reported error (0x80070057) : 'Could not complete the operation. One or more parameter values are not valid.

I have three other active accounts, all of which are working fine. This is my work one and is rather critical!

Could one of our esteemed members please advise as to what can be done to cure the problem?

My alternative reply email is [email protected]

With thanks

Badger
 

A:Email sending reported error

A few questions for you.

-Has this ever worked for you?
-Have you confirmed that all of your settings are correct?
-Does this work when in the office?
 

Read other 2 answers
RELEVANCY SCORE 72.4

Hi,

I have been having trouble with my email and I'm hoping someone can help point me in the right direction to get it fixed.

I set up a pop3 pophost email account about 6 months ago and after carefully following the instructions, everything was working fine. Both sending and receiving emails were working properly.

I am using microsoft outlook 2003 to deal with my emails.

However, on Friday, after 6 months of working fine, and without me changing any settings (certainly not knowingly changing any settings!!) I started receiving this error report:

"Sending reported error (0x800CCC78): Unable to send the message. Please verify the email address in your account properties. The server responded: 553 From: adress not verified."

The error message then pointed me in the direction of Yahoo mail help web page, but I don't and never have used a Yahoo mail web account.

My incoming email appears to be receiving ok, but I am unable to send any email.

I have checked my account settings and everything appears to be ok within Outlook for my pophost account.

Can anyone help me please sort out the problem, or point me in the right direction of where to get some information on how to sort it?

Thanks,

watty
 

A:Solved: Sending reported error: Query ???

I seem to have resolved my problem... it appears that since my ISP/Broadband provider is BT, and that they have an alliance with Yahoo, it had to do with Yahoo changing their verified email address system and users that have a pop account.

I found the following pages that helped:

http://8help.osu.edu/3734.html

and

http://help.yahoo.com/l/us/yahoo/mail/original/manage/sendfrom-07.html

I hope that this may help some others out there.

watty
 

Read other 2 answers
RELEVANCY SCORE 72

Hi,

I have encountered this problem within the last month much to my annoyance.
After speaking to everyone possible e.g. ISP and E-mail hosting company, IT
friends no-one can solve it. Oh i have a pop 3 account.

To hopefully move things along quicker i have tried the following:

1) I have deleted all e-mail accounts and re-entered them with SMTP
authentication ticked every time.
2) My e-mail account has been set up on another computer and sending e-mail
is fine.
3) I have re-set my computer to factory settings and re-installed Microsoft
Office and tried setting up my e-mail account again to no avail.
4) Deleted all anti virus software as had 'Norton' installed which i've heard
can effect this sort of thing, especially if it conflicts with other software.

5) Tried using Outlook Express but have the same problem
6) There are probably more but cant remember now!!!!!
7) Oh yes trawled the internet for a solution and found nothing i havn't
tried.

PLEASE help me as this is a business e-mail and although i can use webmail i
do not have all the other stuff contained in Outlook.

I have not tried setting up another e-mail account (not outlook) but dont
really want to unless i have to.

All help greatly appreciated

Ian
 

Read other answers
RELEVANCY SCORE 70.4

I can see the emails being sent out by outlook on my computer (computer accessing smtp and sending them when outlook is open... sending 1 of 1823). I cleaned the PST, created a new PST and copied my inbox into it. I did a malwarebytes scan, antirootkit scan, adw, found nothing at all.
 
I was receiving tons of chinese spam, blacklisted the domains from China, but I'm at a loss at how to make the stupid outlook stop sending spam by itself. How does it do it?
 
Edit: closed outlook, renamed pst, opened outlook, created new empty pst, it's still trying to send 1800 emails....
 
Edit2: Ok so I went to the webmail, there was still 1000+ mails there in chinese, deleted those, blocked 126.com/163.com/qq.com in the admin panel, then on the computer, I flushed the Outlook Files and recreated the PST.... in the admin panel, it shows 0 sent for today... which is good....
 
Why am I (seemingly) not detecting any infection if I (was) sending spam? I confirmed that the IP from which the emails were sent was the office's IP... and there's only two computers here and only one with this account... and I physically SAW outlook trying to send loads of emails... I also reset the password...

A:Outlook 2016 sending chinese spam emails

Someone may have your email password.. Change that first.MiniToolBoxPlease download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP conf[igurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run. Note: When using "Reset FF Proxy Settings" option Firefox should be closed.TDSSKillerDownload TDSSKiller and save it to your desktop.Extract (unzip) its contents to your desktop.Open the TDSSKiller folder and doubleclick on TDSSKiller.exe to run the application, then on Start Scan.If an infected file is detected, the default action will be Cure, click on Continue.If a suspicious file is detected, the default action will be Skip, click on Continue.It may ask you to reboot the computer to complete the process. Click on Reboot Now.If no reboot is required, click on Report. A log file should appear. Please copy and paste the contents of that file here.If a reboot is required, the report can also be found in your root directory (usually C:\ folder) in the form of TDSSKiller_xxxx_log.txt. Please copy and paste the contents of that file here.AdwCleanerPlease download AdwCleaner by Xplode and save to your Desktop.Double click on AdwCleaner.exe to run th... Read more

Read other 1 answers
RELEVANCY SCORE 63.2

I have my Outlook 2003 configured to retrieve my e-mail from my Hotmail account. It has been working without a hitch up until now. Well today, I have encountered a problem. Incoming mail from Hotmail is still delivered without a problem, but when I try to send mail through Hotmail all of a sudden I'm getting the following message:

Task 'Hotmail - Sending' reported error (0x800CCC3C): 'The server reported an error. The server responded 'Precondition Failed'.'

Does this problem have anything to do with my computer or is it a Hotmail problem?

Thanks for your help! Eric
 

A:Outlook 2003 reported error 0x800CCC3C

Too many messages sent in a 24 hour period can cause this.

Try the web interface, you may see the popup message
 

Read other 3 answers
RELEVANCY SCORE 62.8

Just upgraded from Outlook 2000 to Office 2010 and for short while, Outlook was fine. Now not receiving emails...error message. Have tried new profile, also restored to an earlier system point, works for a bit, then reverts to same problem. Sends fine, does not receive. Windows XP.
 

A:Outlook 2010 Receiving' reported error (0x80040154)

Yup - I have exactly the same problem as described, using the same OS. Any ideas as to how to fix this ?
 

Read other 3 answers
RELEVANCY SCORE 61.2

Hi

One of the client (OS XP Prof) his Microsoft Outlook 2003 (not office XP) shows status disconnected from Exchange 2003 (Win2003 SP2 Active Directory environment).

I tried to Google but all the solutions that I found so far could not solve the issue

I uninstalled Microsoft office from the client PC and installed fresh copy with OfficeSP2 still I am experiencing same problem.

I created new profile but I did not find it worked,,,,I do not know if I did it right or not

Unchecked and Checked " Use Cashed Exchange Mode ".

http://www.google.com.au/search?hl=en&...mp;aq=o&oq=

The error message that I am receiving is





Task ' Microsoft Exchange Server ' reported error (0x80040110) : ' This server is not available. Contact your Administrator if this condition persists. 'Click to expand...

I tried the thread below which is same my issue that I have been experiencing

http://www.experts-exchange.com/Software/S...Q_23021639.html

From the client PC that has this issue I can ping the server (192.168.0.50) , but I can not ping the name of the server (telserver) and I cannot use name either when I try remotely to RDP to the server and I can browse the internet.

From other PCs (I tried two of the) I can ping server name and ip address of the server and I can use the server name as well when I try remotely to RDP to the server.

The funny thing when I create (testing purpose) the profile for this client o... Read more

A:Microsoft Outlook 2003 status disconnected and reported error (0x80040110)

Which Antivirus and Firewall are you using?
Have you any other live protecting software installed?
Also read here:
The Event service does not start, and error code 0x80040110 is logged in Event Viewer on an Exchange 5.5 computer



To resolve this issue, add the following section to the WINNT\System32\Mapisvc.inf file, and then start the Event service:

[MSEMS_MSMail_Section]
UID=13DBB0C8AA05101A9BB000AA002FC45A
66000003=01050000
66010003=04000000
66050003=03000000
66040003=02000000Click to expand...

Also read here:
When you use Outlook with an Exchange 2007 mailbox, you cannot connect to Exchange 2007, and you receive an error message
 

Read other 2 answers
RELEVANCY SCORE 60.4

When attempting to send an e-mail msg. to muliple addresses, I rec. "error msg 0x800CCC69, server error, port 587" Am running WinXP Home with OE6 for e-mail.
Plz Advise, Thk-U.
 

A:Error Msg. 0x800CCC69

Are you using Anti-virus and/or firewall software? If so what product and what version?
 

Read other 2 answers
RELEVANCY SCORE 60.4

I am using Windows Vista- I learned of the problem because my ip was reported as sending out spam. I ran the hijackthis scan- here is the log
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:07:21 AM, on 9/1/2010
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18498)
Boot mode: Normal
Running processes:
C:\Windows\system32\taskeng.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Sony\Reader\Data\bin\launcher\Reader Library Launcher.exe
C:\Program Files\AVG\AVG9\avgtray.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Windows\system32\wuauclt.exe
C:\Program Files\Common Files\Research In Motion\RIMDeviceManager\RIMDeviceManager.exe
C:\Program Files\Common Files\Research In Motion\USB Drivers\BbDevMgr.exe
C:\Windows\System32\OBroker.exe
C:\Windows\system32\Macromed\Flash\FlashUtil10e.exe
C:\Program Files\Research In Motion\BlackBerry\DesktopMgr.exe
C:\Program Files\Internet Explorer\ieuser.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Google\Google Toolbar\GoogleToolbarUser_32.exe
C:\Users\mselizann\HijackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.hotmail.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.toshibadirect.com/dpdstart
R1 - HKLM\Software\Microsoft\Internet E... Read more

A:My computer was reported as sending out spam

Read other 6 answers
RELEVANCY SCORE 59.6

I am new to these forums, but thought I'd add to the discussion on this error message on Outlook Express:
"Server Error: 550, Error Number 0x800CCC69".
There is one possible simpler cause, and solution, to this problem than those identified on the forum.
I was unable to send messages, getting the above error message, but was able to receive them. The problem was that one of my messages concerned a bridge competition known as the "Hercock Trophy". Once I removed the apparently offending word "Hercock" from the message title and text, the message went OK and the problem was resolved. This was even though I'd received messages with that name in the title and so was just hitting the reply button which automatically included this in the title.
I should have read the error message more carefully as it did say "Message content rejected", but, like many other non-experts, I simply Googled the error number and came across you guys.
 

Read other answers
RELEVANCY SCORE 59.6

I received an email from my ISP today warning that my account is sending spam emails. I don't use this account at all, it is created when i subscribed with my ISP. So, this could be malware or something.

If I don't turn on the computer or not to connect to the Internet through this computer, will the spam mails still be sent out? I want to get someone to have a look for me but at the meantime, is there anything I could do to prevent spam mails being sent out?

A:my computer is reported as sending spam email

Hello and Welcome to TSF.

You will have to keep the computer offline to prevent the spam emails.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through allthe steps, you shall have a proper set of logs. Please post them in a new thread, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

------------------------------------------------------

Read other 1 answers
RELEVANCY SCORE 59.2

I have a Gateway computer and am running Windows Vista with an IE browser. I have a newsletter I eMail to about 50 people. It's bad enough that I have to seperate the list into 3 groups (it will only let me mail to 20 people at a time), but now it won't mail it at all. Here is the message I'm getting:

"An unknown error has occurred. Subject 'eVangie News - How to Witness to a Mormon (2 articles)', Account: 'COTS House Jacksonville', Server: 'smtpauth.flash.net', Protocol: SMTP, Server Response: '550 5.7.1 ClamAv_Reject, Heuristics.Phishing.Email.SpoofedDomain', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC69"

The rest of my eMails are sent ok, just my newsletter won't go. Anyone know how to fix this?

A:Windows Mail Error 0x800CCC69

Hello, and welcome to the Vista Forums!

I see your problem. This is being rejected because of Heuristics, rather than a database, and so false positives are being generated. Technically speaking, this is not a true false positive, but it does not really matter to you whether it is or not!

Right, this error is being generated because there is a URL concealment in your newsletter, which could be a phishing attack, and so is being blocked. There are two ways to fix this, remove the URL concealment, or completely disable the Heuristics Scanning of URLs. Ideally, we would change the newsletter, as the Heuristics will pick up some real phising attacks, which we would want blocked.

The most common cause of this error message is a TinyURL link, as I cannot see where it is leading me to, without a lot of analysis, which the average user would not do. You could be leading me anywhere, to the worst sorts of websites, and I would just blindly stumble into it. I understand that you are not doing this, but do you see the problem, and why this has been flagged up as a safely issue?

So, please remove all TinyURLs, and replace them with the actual URLs, and this Newsletter should be allowed through. Failing that, we could completely disable this protection (not recommended) and may be blocked at the receiving end, or (if applicable) you could get this newsletter to me, and I could have a look, and see if I could find the fault.

I don't know how you want to work this, but could you pleas... Read more

Read other 1 answers
RELEVANCY SCORE 59.2

Hello Guys,
New to the forum, first time user.

Name is Scott, im from Canada.

My problem is im having an issue with the windows live server lately, last week I had an issue sending emails with attachments. I tried everything I could to try and fix it my self but being im sort of new to Computers I don't know much, I came up on this online tech support(TechUtilities) that did eventually solve my problem but it cost a lot of money to do so. I cant afford that being im a young adult trying to get a start in life. Now again this week I am again getting a server error, this time its server error 0x800ccc69, I have no clue what to do here and I need this issue fixed because I need my email for study and work purposes. any help is GREATLY APPRECIATED.... thanks,

Scott
 

Read other answers
RELEVANCY SCORE 58

I get the following error message when trying to send using Windows Mail. I have been running WM for about a year and previously had this issue, but replaced Norton with Avast and since it has been fine. But as of today, I'm duped. I've deleted the mail account and set up again but nothign doing. Can anyone help?

An unknown error has occurred. Subject 'test', Account: 'mail.relisheurope.com', Server: 'mail.relisheurope.com', Protocol: SMTP, Server Response: '550 IP address 92.2.218.96 in XBL', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC69

Thanks

Mark

A:Server Error: 550, Error Number: 0x800CCC69

Hi, markh, and welcome to the forums.

The error code you're receiving indicates that you are connecting to the server, but the server is unable to find your mailbox. See Understanding SMTP error codes - April 30th, 2003 and SMTP reply codes - and that indicates that there may be some server -related issues. have you called them up to find out about your account?

Read other 2 answers
RELEVANCY SCORE 57.2

According to all sources that I could find on-line, it appears that rules are part of pst file.

However, this does not happening in my case.

I use outlook 2016 (part of MS office 2016) and have several accounts linked with this ? From my ISP (POP), Hotmail, yahoo, Gmail. I have rules only for account from my ISP.

Recently I deleted my Hotmail account, removed it from my outlook, deleted associated ost file. Then I had second thought and re-activated this hotmal account the following day. Added this to my outlook. To my surprise all rules vanished. Not a single rule remained. I did NOT have any rules setup for Hotmail account. Even column details for message folders (part of setting) got changed.

I decided to check further. Copied my pst files to another computer which had same version of outlook installed and has exactly the same setup.

Now I added some rules on my 1st computer. Checked the 2nd computer. The same rule appeared there. That means pst file does not contain rules.

So, Where are they?

Hope someone can help me. I am lost!!
Thanks
 

Read other answers
RELEVANCY SCORE 57.2

I am having an error pop up when attempting to access my Outlook 2016 email and or bringing up Internet Explorer.  I can access my email if I used the web access using the Google Chrome browser, but not through Internet Explorer.  I was looking
for a location on the microsoft site to download this file, but I am not finding it.  Any advise.

Thanks,

Deb99

Read other answers
RELEVANCY SCORE 57.2

I was using Outlook 2007 calendar and sync with google in my old computer. It worked fine. I did not successfully backup the outlook. Now, I am suing a new computer with vista. I am trying to sync google calendar with my outlook. It always pops this message out error:2016. I checked the error message online. It reads, "This error displays if you try to sync your events before signing up for Google Calendar. Please log in to Google Calendar at least once before using Google Calendar Sync." However, I tried logging in before I am doing sync, but it is still not working. Same error message pops up, always.
 

Read other answers
RELEVANCY SCORE 57.2

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz, x64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3062 Mb
Graphics Card: NVIDIA GeForce GT 230M, 1024 Mb
Hard Drives: C: 453 GB (101 GB Free); D: 11 GB (1 GB Free); E: 0 GB (0 GB Free); H: 1863 GB (347 GB Free);
Motherboard: Hewlett-Packard, 3659
Antivirus: Microsoft Security Essentials, Enabled and Updated

Message:
Outlook couldn't start last time - do you want to start in safe mode
My response - YES
i Something is wrong with one of your data files & Outlook needs to close
Outlook might be able to fix your file. Click OK to run the inbox repair tool

My notes:
I ran the inbox repair tool several times without success
I reloaded Outlook program

I use Gmail as my mail program

Appreciate any help .... thanks
 

Read other answers
RELEVANCY SCORE 56.8

my mail id sending same mail 200 time. mail id configured in outlook 2016, mainly above 10mb size mails are sending repeatedly. is there any solution, pls help me
 

A:outlook sending error

Have a read through this

https://www.msoutlook.info/question/multiple-email-copies-being-sent
 

Read other 2 answers
RELEVANCY SCORE 56.8

I've just moved my laptop from London to Bangkok. Outlook worked fine in London, but I'm having problems here. It receives e-mails but it refuses to send them, each time giving me the message 'Sending and Receiving reported error (0x800CCCOF): The connection to the server was interrupted'. But the connection connection wasn't interrupted.... Any idea what I can do? If you can help, assume that I know absolutely nothing (I don't know a POP from an STMP) and give me very basic instructions. Thanks a lot to anyone who can help...
 

Read other answers
RELEVANCY SCORE 56.4

I am baffled by this one, and hope someone can help. I've installed literally dozens of gmail accounts into Outlook for clients, but this one is giving me fits. Every time I try to enter the account into a new Outlook 2016, the program hangs and then gives me an error message about an IMAP error, saying "Your IMAP server wants to alert you to the following:" with an error number and a link to "answers" from Google. Now, I know Outlook and Google very well. The suggestions they give are the ones I have already done:

enabled less secure apps access to the account
double-checked that the password is correct and logged into the account online
enabled IMAP connection in Gmail settings
logged in through the CAPTCHA site suggested, though no CAPTCHA appeared
checked to be sure that two-step verification is NOT turned on
created a brand new profile through the Mail section of Control Panel
entered suggested Gmail server and port settings manually
My method is to create a profile without an email account so that I'll have a pst file to contain contacts and calendar. Then, I add the email account. This is just crazy, I've never seen anything like it. Ideas would be most welcome!
 

A:IMAP error adding Gmail to Outlook 2016 - Windows 10

Read other 10 answers
RELEVANCY SCORE 56.4

I am importing an Outlook 2016 generated .CSV contact list into a webmail email account but keep receiving the following error.

Unknown error for item "(Unknown)": Could not parse csv file - Reason : missing column name for column[92]

There are 92 columns and each one has a column name. 92 columns is what Outlook 2016 generates, most columns are empty, just the name. I had previously tried deleting columns with no data but still got the same error, and always for the last column.

Is there a trick to get this contact list imported successfully? I am trying to create a whitelist filter to reject all email where the FROM name isn't in my contact file. My .CSV file contains 162 rows.

Read other answers
RELEVANCY SCORE 56.4

Ever since I let miscrsoft tech support into my outlook it has been behaving badly. They put my info in a pst file and it wasnt setup like that before.   Now my search function isnt working when I search for emails, tasks and contacts.  I get the error "Something Went Wrong and your search couldnt be completed".  I tried re indexing and that didnt help.  I tried deleting my deleted mail and that didnt work.  I dont know what to do.  Please help if you can.  

A:Outlook 2016 error "Something Went Wrong and your search couldnt be completed"

I've seen some posts suggesting a conflict with Malwarebytes.  Try uninstalling if installed.  Also updates KB4022725 and KB4022405 are being blamed for initiating the problem.  I'm looking at third party options to improve search.

Read other 4 answers
RELEVANCY SCORE 56.4

I use Outlook Express for my three e-mail accounts. One is a hotmail account, one is an AOL account, and the one that is having problems is the POP3 account with Adelphia. Now it has worked fine for a few years now, with WindowsXP Pro running and all. I can recieve e-mail through all 3 accounts, but the adelphia account stopped sending I think after I upgraded my MSN Messenger, uninstalling verison 4.7 that comes with XP (which is also tied into Outlook) to the newest version of 6.2. Outlook comes back with this error message:

Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'Adelphia', Server: 'mail.adelphia.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Error Number: 0x800CCC0F

There was also a syntax error message that came up twice each time I started Outlook, so I uninstalled Messenger, which took away the syntax error message, but still does not send through the POP3 account.

I have dis-abled, and re-enabled the e-mail scanning in my Norton's Systemworks, the only difference being when the scanning outgoing is ON Outlook connects to Adelphia, but still won't send (same error message) and when the e-mail scanning outgoing is OFF Outlook cannot connect to Adelphia, still get error message. I have also tried deleting the whole Adelphia account, and then re-entering the settings again with the same results.

I am at a loss t... Read more

A:Outlook Express Sending Error

Read other 8 answers
RELEVANCY SCORE 56.4

Can any help! When I send an email with Outlook Express I get a message ' Some errors occurred when processing the requested task. Please review the list of errors below for more detail' Errors are not listed and the email does get sent BUT remains in my outbox and is resent every 2 minutes. If I don't remove it from my outbox the person receive the email a number of times. It never goes to the sent box.

A:Outlook Express 6.0 error when sending but still get sent

Quote:





Originally Posted by SCHINK


Can any help! When I send an email with Outlook Express I get a message ' Some errors occurred when processing the requested task. Please review the list of errors below for more detail' Errors are not listed and the email does get sent BUT remains in my outbox and is resent every 2 minutes. If I don't remove it from my outbox the person receive the email a number of times. It never goes to the sent box.




That problem is discussed at this link. Maybe you can glean some help from it.

http://www.velocityreviews.com/forum...age-in-oe.html

Read other 1 answers
RELEVANCY SCORE 56.4

Hello lovely people-

1stly - am I in the right forum???

why do I get this message everytime I go to create a message? I dont understand

Can someone please help me with this error message????

Windows XP - Outlook Express 6

szAppName : msimn.exe szAppVer : 6.0.2800.1123 szModName : hungapp
szModVer : 0.0.0.0 offset : 00000000

Send error | Don't send

yes I have updated microsoft online just recently
yes I have run adaware and deleted GATOR
yes I have run HiJack - but not sure where to start looking

Shilo

P.S
Logfile of HijackThis v1.97.7
Scan saved at 11:42:44 AM, on 4/20/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Nhksrv.exe
C:\Program Files\NavNT\defwatch.exe
C:\Program Files\NavNT\rtvscan.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Date Manager\DateManager.exe
C:\Program Files\Common Files\Microsoft Shared\Works Shared\wkcalrem.exe
C:\Program Files\PrecisionTime\PrecisionTime.exe
C:\Program Files\WinZip\WZQKPICK.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\System32\dwwin.exe
C:\Program Files\Microsoft Office\Office10\WINWORD.EXE
C:\Program Files\Microsoft Works\MSWorks.exe
C:\WINDOWS\explorer.exe
C:\Documents and Sett... Read more

Read other answers
RELEVANCY SCORE 56.4

Question: I have Outlook 2003 (Windows XP) and apparently when I try to send emails as small as 110KB, Outlook gets hung up in a processing stage and never sends the email. In fact it rejects or response the email as not sent. Occasionally a message from Symantec will appear indicating an error that the connection was lost with the server and that I should contact my ISP. Symantec's help Tech support Online, says "wait a few hours or contact the ISP support desk and try again. I have removed the programs re installed them and even was instructed to ensure the physical connection, the signal,(the cable) was only split once at 3.5 DB. I have attempted all and still the messages once they reach a certain size to do not send. Any thoughts or comments ? Thank you for any advice you may be able to offer.

Read other answers
RELEVANCY SCORE 56.4

I get this error when I try to send an email using outlook:

No, Server Error:

Code:
505, Error Number: 0x800CCC87
I have searched on google to see about a remedy. No luck.

Anyone ever heard of this or have any suggestion.

I use Windows XP and Office 2000 professional.

Thank You,
Michael
 

A:Error sending outlook email

is the smtp server address entered correctly?
 

Read other 3 answers
RELEVANCY SCORE 56.4

I am using Outlook from Office Pro 2003. Everytime my send/receive is activated, the bottom status bar shows "sending message 1 of 1 ". The trouble is, that there are no messages in my outbox, nor any to send at that time. This has slowed down the processing speed of this program considerably.

Any ideas? Please help.

Many thanks.
 

A:Outlook Error Sending Message 1 of 1

Read other 6 answers
RELEVANCY SCORE 56.4

Oops! I'm sorry. I had put this in the wrong forum. Hopefully I can get a response here.

OS is XP. When using Outlook express and try to send a new e-mail message, recieve error message:

Error 1706. No valid source could be found for Picture It! Photo 2002. Windows installer cannot continue.

Went to microsoft website and could find lots of 1706 errors, but none to match problems. Any suggestions?
 

Read other answers
RELEVANCY SCORE 56.4

Hi, Im using Windows 2000. When I want to send an e-mail with a pdf file attached I receive the error 0x800ccc0D. Im am using Outlook. All my setting is correct. The mail works if I dont have the pdf file attached. I have already disable Norton. I have not firewall or anything blocking me and I am connected to the internet. Also when this error accures my internet connection kicks me off. But this also only happens when I have a pdf file attached to the e-mail I am wanting to sent. Please help.
 

A:Outlook error when sending pdf files

Here is a page that will help you with the error reported. Additionally, it occurs to me the .pdf files you are trying to send are large files. Depending on your connection, it may take a longer to send than the 'server timeout settings' in your Outlook e-mail client. I use Outlook Express, but you probably can find the setting in Outlook > Tools > Accounts > Properties > advanced settings. Make the timeout longer.
 

Read other 2 answers
RELEVANCY SCORE 56

Hi,
OK I have read many threads and posts about the solution "ZeroConfigExchange". But it does'nt work for my Windows 10 clients.

Windows 10 x64Office 2016Office 365 / Azure AD accountsClient computer is join with Azure AD so the users login with Office 365 accountsNo On-promise AD, only Azure ADAutoDiscover and modern authentication works with sharepoint and Outlook 2016Dword "ZeroConfigExchange" = 1 is created in both regkeys for all users
HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\AutoDiscover
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\16.0\Outlook\AutoDiscover
Problem
When I start Outlook 2016 for first time users it still prompts the "Welcome to Outlook 2016" setup wizard where I have to create a profile.

What am I doing wrong?
Best regards

A:Outlook 2016 skip "Welcome to Outlook 2016" setup wizard

It will be best for you if you ask this question in a forum dedicated solely to MS Office Outlook 2016.
I recommend that you use this forum :
http://answers.microsoft.com/en-us/o...=1460639513346

Read other answers
RELEVANCY SCORE 56

I just starting getting the title error everytime I try send email to any address.

Task 'pop.earthlink.net - Sending' reported error (0x800CCC69) : 'Unknown Error 0x800CCC69'

I've seen similar errors posted but no answers on what to do.
 

A:error (0x800CCC69-Unknown Error

Check your SMTP settings and make sure you are using SMTP Authentication (not SSL), and the SMTP Authentication is set to use the same settings as the incoming (POP3) server.

For the POP3 settings, make sure that you are using your entire email address for the username (ie. "[email protected]" - not just "davdow")
 

Read other 1 answers
RELEVANCY SCORE 55.6

Resently I changed my email address to fastmail so I can compose mail in Outlook Express offline.

I can compose and send but they all get sent back with the following error....

MESSAGE COULD NOT BE DELIVERED
CANNOT OPEN SMTP CONNECTION TO '66.111.4.152
CONNECT A SOCKET OPERATION WAS ATTEMPTED TO A UNREACHABLE NETWORK (10051)
I don't have a clue what this means so could some one please help me understand this.

I use xp.
 

Read other answers
RELEVANCY SCORE 55.6

I have seen this before:

Windows XP/Outlook Express 6 shows error at random times when sending email yet email goes through to recipeient. And message appears to stay in Outbox.

But I haven't seen this: Error pop up is "Some errors occured while processing the requested tasks. Please review..." On detail task tab it says "Send 1 messsage(s) using 'NLP'." Error tab is blank. (!!!???)

I have deleted the Outbox.dmx? file but the error came back again. User machine has been rebuilt/all Office patches are in. Windows firewall is turned off. Imail is the email server.

Now there is a second machine that shows same symptoms.

Help.
 

A:Outlook Express error when sending mail

i am having same problems. this is very unusual
 

Read other 2 answers
RELEVANCY SCORE 55.6

I have a system running XP Home and Outlook Express 6. When sending a new message or forwarding a message with an attachment I get a error. It appears that the email has not gone through and remains in the outbox but it actually does go through. If you watch the progress of the message going out the error doesn't occur until the very end. I have turned the outgoing scan on my AV off but that does not seem to help. Any other suggestion?
 

A:Outlook Express 6 error sending attachments

Read other 15 answers
RELEVANCY SCORE 55.6

About a week ago I was sending an attachment to a friend in Outlook 2003 and it locked up. Ever since then whenever I try to send an attachment in Outlook it locks up and gives an error message. Outlook Express does fine. And the odd thing to me is when I go into my non-admin account I can send attachments in Outlook fine.

The first time I try it in a particular day I get this:

Error signature:

szAppName: OUTLOOK.EXE
szAppVer: 11.0.8326.0
szModName: hungapp
szModVer: 0.0.0.0
offset: 000000000

Any subsequent times in the same day I get this:

Error signature:

AppName: outlook.exe
AppVer: 11.0.8326.0
AppStamp: 4c1c2372
ModName: libavcodec.dll
ModVer: 0.0.0.0
ModStamp: 48a75d90
fDebug: 0
Offset: 001fd9e3
I've run Malwarebytes, Super Antispyware, and avast! (and I always have avast running); nothing shows up in these.
I'm currently using Outlook Express for sending attachments.

Any ideas would be greatly appreciated!

Pam

_______________________

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz, x86 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 128 Mb
Hard Drives: C: Total - 305180 MB, Free - 242946 MB;
Motherboard: Dell Inc., 0RY007, , ..CN7360486P00BZ.
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Outlook 2003 Error when Sending Attachments

Read other 7 answers
RELEVANCY SCORE 55.6

Hii all,
OS: windows 98
OUtlook express version: 5.0
Problem:

When i open new mail n finish typing the message n try to send, it gives error message saying something like "MSIMN has generated an error loading DIRECTDB.DLL". Could somebody help me to solve this problem. I don't want to re-install OE, coz its hectic. Hope u guys n gals will help me solve this problem. Thank you n waiting for quick n positive reply.

A:mail sending error outlook express

This is usually caused by the Folders.dbx file being missing, damaged, or using the read-only attributeClick Start | Find, and then click Files or Folders. In the Named box, type folders.dbx In the Look In box, click your main hard disk (usually drive C), and then click Find Now Right-click the Folders.dbx file, and then click Rename Type folders.old, and then click OK. Start Outlook Express. This creates a new Folders.dbx file automatically.

Read other 1 answers